glib/.gitlab-ci.yml
2024-08-02 13:57:29 +02:00

871 lines
27 KiB
YAML
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

stages:
- style-check
- build
- coverage
- analysis
- deploy
- report
cache:
paths:
- _ccache/
variables:
FEDORA_IMAGE: "registry.gitlab.gnome.org/gnome/glib/fedora:v39.1"
COVERITY_IMAGE: "registry.gitlab.gnome.org/gnome/glib/coverity:v7"
DEBIAN_IMAGE: "registry.gitlab.gnome.org/gnome/glib/debian-stable:v19"
ALPINE_IMAGE: "registry.gitlab.gnome.org/gnome/glib/alpine:v3"
MINGW_IMAGE: "registry.gitlab.gnome.org/gnome/glib/mingw:v39.1"
MESON_TEST_TIMEOUT_MULTIPLIER: 4
G_MESSAGES_DEBUG: all
MESON_COMMON_OPTIONS: "--buildtype debug --wrap-mode=nodownload --fatal-meson-warnings"
# Default CI job setup; contrast with `.only-origin`.
#
# Dont execute the pipeline when a merge request is merged into `origin/main`,
# as it will have already been tested
.only-default:
only:
- branches
except:
refs:
- tags
variables:
- $CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH && $CI_PROJECT_NAMESPACE == "GNOME"
# As above, but does get executed on merge into `origin/main`. For use with
# updating code coverage results and docs builds.
.only-default-and-merges:
only:
- branches
except:
refs:
- tags
# Some jobs run on CI runners which dont have good isolation between CI jobs,
# and dont have much available resource. Limit those jobs to only ones on the
# origin repository (GNOME/glib), rather than peoples forks. Code in the origin
# repository can be trusted.
.only-origin:
only:
- branches@GNOME/glib
except:
- tags
# Some jobs take a long time and are unlikely to find failures (or will find
# failures which are not merge-blockers to fix), so theyre executed on a weekly
# schedule in order to save CI resources and speed up branch pipelines.
.only-schedules:
only:
- schedules
except:
- tags
# Some jobs take a long time and are unlikely to find failures (or will find
# failures which are not merge-blockers to fix), so theyre executed on a weekly
# schedule in order to save CI resources and speed up branch pipelines.
# But for specific merge requests, one may still want to run them, so make
# possible to run them manually.
.only-schedules-or-manual:
rules:
- if: $CI_PIPELINE_SOURCE == "merge_request_event"
when: never
# As per rule before, the following rules will only apply to non MR events
- if: $CI_PIPELINE_SOURCE == "schedule"
when: always
- if: $CI_PIPELINE_SOURCE != "schedule"
when: manual
allow_failure: true
# Some jobs should be runnable only on schedules and when triggered by a branch
# in the origin repository, but without
.only-schedules-or-manual-in-default-branch:
rules:
- if: $CI_PROJECT_PATH != "GNOME/glib" || $CI_COMMIT_BRANCH != $CI_DEFAULT_BRANCH
when: never
# As per rule before, the following rules will apply only to GNOME/glib:main
- if: $CI_PIPELINE_SOURCE == "schedule"
when: always
- if: $CI_PIPELINE_SOURCE != "schedule"
when: manual
allow_failure: true
# Some jobs run on CI runners dont have much available resource.
# Limit those jobs to only ones on the origin repository (GNOME/glib),
# rather than peoples forks or if ran manually.
.only-origin-or-manual:
rules:
- if: $CI_PIPELINE_SOURCE == "merge_request_event"
when: never
- if: $CI_PIPELINE_SOURCE == "schedule"
when: never
- if: $CI_PROJECT_NAMESPACE == "GNOME"
when: always
- if: $CI_PROJECT_NAMESPACE != "GNOME"
when: manual
allow_failure: true
.build-linux:
before_script:
- bash .gitlab-ci/show-execution-environment.sh
- cp -r $HOME/subprojects/* subprojects/
# FIXME: Work around https://gitlab.com/gitlab-org/gitlab/-/issues/391756
.with-git:
before_script:
- rm -rf subprojects/gvdb
- git config --global --add safe.directory "${PWD}"
- git submodule update --init --depth 1
variables:
GIT_SUBMODULE_STRATEGY: "none"
GIT_SUBMODULE_DEPTH: 1
style-check-advisory:
extends:
- .only-default
- .with-git
image: $DEBIAN_IMAGE
stage: style-check
allow_failure: true
script:
- failed=
- .gitlab-ci/run-style-check-diff.sh || failed=1
- .gitlab-ci/run-check-todos.sh || failed=1
- test -z "$failed"
sh-and-py-check:
extends:
- .only-default
- .with-git
image: $DEBIAN_IMAGE
stage: style-check
allow_failure: false
script:
- failed=
- tests/shellcheck.sh || failed=1
- tests/black.sh || failed=1
- tests/flake8.sh || failed=1
- test -z "$failed"
variables:
LINT_WARNINGS_ARE_ERRORS: '1'
only:
changes:
- "**/*.py"
- "**/*.sh"
style-check-mandatory:
extends:
- .only-default
- .with-git
image: $DEBIAN_IMAGE
stage: style-check
allow_failure: false
script:
- tests/reuse.sh
variables:
LINT_WARNINGS_ARE_ERRORS: '1'
fedora-x86_64:
extends:
- .build-linux
- .only-default-and-merges
- .with-git
image: $FEDORA_IMAGE
stage: build
needs: []
variables:
CFLAGS: "--coverage -ftest-coverage -fprofile-arcs -fprofile-update=atomic"
CXXFLAGS: "--coverage -ftest-coverage -fprofile-arcs -fprofile-update=atomic"
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix=$HOME/glib-installed
--localstatedir=/var
--libdir=lib
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Ddocumentation=true
-Dintrospection=enabled
-Dman-pages=enabled
_build
- meson compile -C _build
- mkdir -p _coverage
- lcov --config-file .lcovrc --directory _build --capture --initial
--output-file "_coverage/${CI_JOB_NAME}-baseline.lcov"
- .gitlab-ci/run-tests.sh
- lcov --config-file .lcovrc --directory _build --capture
--output-file "_coverage/${CI_JOB_NAME}.lcov"
# Copy the built documentation to an artifact directory. The build for docs.gtk.org
# can then pull it from there — see https://gitlab.gnome.org/GNOME/gtk/-/blob/docs-gtk-org/README.md
- mkdir -p _reference/
- mv _build/docs/reference/glib/glib-2.0/ _reference/glib/
- mv _build/docs/reference/glib/glib-unix-2.0/ _reference/glib-unix/
- mv _build/docs/reference/gmodule/gmodule-2.0/ _reference/gmodule/
- mv _build/docs/reference/gobject/gobject-2.0/ _reference/gobject/
- mv _build/docs/reference/gio/gio-2.0/ _reference/gio/
- mv _build/docs/reference/gio/gio-unix-2.0/ _reference/gio-unix/
- mv _build/docs/reference/girepository/girepository-2.0/ _reference/girepository/
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
- "_coverage"
- "_reference"
debian-stable-x86_64:
extends:
- .build-linux
- .only-default
- .with-git
image: $DEBIAN_IMAGE
stage: build
needs: []
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix=$HOME/glib-installed
--localstatedir=/var
--libdir=lib
-Dsystemtap=enabled
-Ddtrace=enabled
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
hurd-i386:
extends:
- .only-schedules-or-manual
- .with-git
stage: build
tags:
- hurd
needs: []
script:
# FIXME: We cant use ${MESON_COMMON_OPTIONS} here because the Hurd runner
# has Meson 1.3 installed. See the comment below about the same problem on
# FreeBSD.
- meson setup
--buildtype debug
--wrap-mode=nodownload
--werror
--default-library=both
--prefix=$HOME/glib-installed
--localstatedir=/var
--libdir=lib
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
muslc-alpine-x86_64:
extends:
- .build-linux
- .only-schedules-or-manual
- .with-git
image: $ALPINE_IMAGE
stage: build
needs: []
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix=$HOME/glib-installed
--localstatedir=/var
--libdir=lib
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
installed-tests:
extends:
- .build-linux
- .only-schedules-or-manual
image: $FEDORA_IMAGE
stage: build
needs: []
script:
# dtrace is disabled because it breaks the static-link.py test
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--prefix=/usr --libdir=/usr/lib64
-Dinstalled_tests=true
-Ddefault_library=both
-Ddtrace=disabled
_build
- meson compile -C _build
- sudo meson install -C _build
# Remove old headers, possibly present in current installation
- sudo rm -f /usr/include/glib-2.0/glib/gurifuncs.h
- sudo chown -R `id -un`:`id -gn` _build/
# Work-around https://gitlab.gnome.org/GNOME/gnome-desktop-testing/merge_requests/2
- mkdir -p _build/installed-tests-report/logs/
- GLIB_TEST_COMPILATION=1 gnome-desktop-testing-runner
--report-directory=_build/installed-tests-report/failed/
--log-directory=_build/installed-tests-report/logs/
--parallel=0
glib
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
- "_build/installed-tests-report/"
G_DISABLE_ASSERT:
extends:
- .build-linux
- .only-schedules-or-manual
- .with-git
image: $FEDORA_IMAGE
stage: build
needs: []
variables:
MESON_TEST_TIMEOUT_MULTIPLIER: 15
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dglib_assert=false
-Dintrospection=enabled
_build
- meson compile -C _build
# Also take the opportunity to run the thorough tests (which are slow)
- bash -x ./.gitlab-ci/run-tests.sh --setup thorough
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
valgrind:
extends:
- .build-linux
- .only-schedules-or-manual
- .with-git
image: $FEDORA_IMAGE
stage: analysis
needs: []
variables:
MESON_TEST_TIMEOUT_MULTIPLIER: 15
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dintrospection=enabled
_build
- meson compile -C _build
# Valgrind doesnt work when the soft FD limit is set too high
# See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2710
- ulimit -Sn 1024
- bash -x ./.gitlab-ci/run-tests.sh
--setup valgrind
--no-suite slow
artifacts:
reports:
junit: "_build/meson-logs/testlog-valgrind.junit.xml"
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
.cross-build-linux:
extends: .build-linux
stage: build
needs: []
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/meson-logs"
cross-android_arm64:
extends:
- .cross-build-linux
- .only-default
image: $FEDORA_IMAGE
script:
# FIXME: add --werror
- meson setup ${MESON_COMMON_OPTIONS} --cross-file=.gitlab-ci/cross_file_android_arm64_31.txt _build
- meson compile -C _build
cross-mingw64:
extends:
- .cross-build-linux
- .only-default
image: $MINGW_IMAGE
variables:
PYTHONUTF8: "1"
script:
# FIXME: Add --werror
- meson setup ${MESON_COMMON_OPTIONS} --cross-file=/opt/cross_file_mingw64.txt _build
- meson compile -C _build
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _build/glib/libglib-2.0-0.dll
- _build/gio/libgio-2.0-0.dll
- _build/gmodule/libgmodule-2.0-0.dll
- _build/gthread/libgthread-2.0-0.dll
- _build/gobject/libgobject-2.0-0.dll
# A note about msys2: its a rolling release distribution, running Windows under
# Docker isnt really supported, and the win32-ps CI runner is shared. All that
# adds up to mean that we have to run CI against the latest msys2 packages, and
# that this occasionally causes build failures in GLib due to changes in msys2.
# In order to avoid that pre-empting other GLib development, the policy in such
# cases is to:
# 1. Immediately and without hesitation make the msys2-* CI jobs non-fatal
# (add `allow_failure: true` below).
# 2. File an issue about fixing the GLib msys2 build and re-enabling failure
# on the CI job
# 3. Set the milestone for that issue to be the next GLib release, so its done
# in a timely manner; and tag it as ~win32 so the GLib Windows maintainers
# are notified and can work on it.
# 4. Rebase any pending broken MRs on top of the commit which makes the CI job
# non-fatal, so that development on `main` is unblocked.
msys2-mingw32:
allow_failure: true
extends: .only-default-and-merges
stage: build
tags:
- win32-ps
needs: []
variables:
MSYSTEM: "MINGW32"
CHERE_INVOKING: "yes"
CFLAGS: -coverage -ftest-coverage -fprofile-arcs
PYTHONUTF8: "1"
script:
- C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20
- C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh
- C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh"
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _coverage/
- _reference/
# See the note about msys2 CI job failure policy above.
msys2-clang64:
extends: .only-schedules-or-manual
stage: build
tags:
- win32-ps
needs: []
variables:
MSYSTEM: "CLANG64"
CHERE_INVOKING: "yes"
PYTHONUTF8: "1"
script:
- C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20
- C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh
- C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh"
artifacts:
reports:
junit: "_build/meson-logs/testlog.junit.xml"
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
vs2017-x64:
extends: .only-default
stage: build
tags:
- win32-ps
needs: []
variables:
PYTHONUTF8: "1"
script:
# FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
# arent currently set up for that.
- .gitlab-ci/test-msvc.bat ${MESON_COMMON_OPTIONS}
--wrap-mode=default
--python.platlibdir=C:\Python37\site-packages
--python.purelibdir=C:\Python37\site-packages
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _build/glib/libglib-2.0-0.dll
- _build/gio/libgio-2.0-0.dll
- _build/gmodule/libgmodule-2.0-0.dll
- _build/gthread/libgthread-2.0-0.dll
- _build/gobject/libgobject-2.0-0.dll
vs2017-x64-static:
extends: .only-default
stage: build
tags:
- win32-ps
needs: []
variables:
PYTHONUTF8: "1"
script:
# FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
# arent currently set up for that.
- .gitlab-ci/test-msvc.bat ${MESON_COMMON_OPTIONS}
--wrap-mode=default
--default-library=static
--python.platlibdir=C:\Python37\site-packages
--python.purelibdir=C:\Python37\site-packages
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
freebsd-13-x86_64:
extends: .only-schedules-or-manual
stage: build
tags:
- freebsd-13
needs: []
variables:
CPPFLAGS: -I/usr/local/include
LDFLAGS: -L/usr/local/lib -Wl,--disable-new-dtags
LANG: C.UTF-8
before_script:
- bash .gitlab-ci/show-execution-environment.sh
script:
# FIXME: We cant use ${MESON_COMMON_OPTIONS} here because the FreeBSD 13
# runner has Meson 1.3 installed. This has an API hole where previous
# methods of getting paths from files() objects are rejected as deprecated,
# but no replacements are available. Hence, we cant build with
# --fatal-meson-warnings. This should be fixed in Meson 1.4. Its also fine
# with Meson 1.2.3 (which is what we use on all the other CI runners).
# See https://github.com/GNOME/glib/commit/71061fdcb33b8c26f5f8467cb3ac10704d65c87d
- meson setup --buildtype debug --wrap-mode=nodownload
--localstatedir=/var
-Db_lundef=false
-Dxattr=false
-Dsystemtap=disabled
-Ddtrace=disabled
_build
- meson compile -C _build
- bash -x ./.gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
macos-x86_64:
# The macOS runner is not allowed in forks. This is about trust, not capacity.
extends: .only-origin
stage: build
tags:
- macosintel
needs: []
cache: []
variables:
GIT_SUBMODULE_STRATEGY: normal
# -Wno-overlength-strings
# libpcre2 gets built as a subproject, but the default Clang options on
# macOS limit string lengths to 4095B — pcre2_error.c has a string of length
# 4380B
CFLAGS: "-Wno-overlength-strings"
# redirect to the runner's volatile temporary directory
TMPDIR: /Users/Shared/work/tmp
# keep the user profile clean
PIP_CACHE_DIR: /Users/Shared/build/cache
PIPENV_CACHE_DIR: $PIP_CACHE_DIR
PYTHONPYCACHEPREFIX: $PIP_CACHE_DIR
# target OS X 10.9 Mavericks for backward compatibility
SDKROOT: /opt/sdks/MacOSX10.9.sdk
# use the runner's ccache directory
CCACHE_DIR: /Users/Shared/work/ccache
before_script:
- bash .gitlab-ci/show-execution-environment.sh
- python3 -m venv .venv
- ln -s /opt/cmake/CMake.app/Contents/bin/cmake .venv/bin
- ln -s /opt/ccache/ccache .venv/bin
- source .venv/bin/activate
- pip3 install meson==1.2.3
- pip3 install ninja==1.11.1
script:
# FIXME: Use --wrap-mode=default so we download dependencies each time,
# until the macOS runner is a VM where we can use a pre-made image which
# already contains the dependencies. See:
# - https://gitlab.gnome.org/GNOME/glib/merge_requests/388
# - https://gitlab.gnome.org/Infrastructure/Infrastructure/issues/225
- meson setup ${MESON_COMMON_OPTIONS}
--wrap-mode=default
--werror
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
coverage:
extends: .only-default
image: $FEDORA_IMAGE
stage: coverage
needs: ['fedora-x86_64', 'msys2-mingw32']
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
expire_in: 1 week
expose_as: 'Coverage Report'
paths:
- _coverage/coverage/index.html
- _coverage
reports:
coverage_report:
coverage_format: cobertura
path: _coverage/*-cobertura/cobertura-*.xml
before_script:
- bash .gitlab-ci/show-execution-environment.sh
script:
- bash -x ./.gitlab-ci/coverage-docker.sh
coverage: '/^\s+lines\.+:\s+([\d.]+\%)\s+/'
scan-build:
extends:
- .build-linux
- .only-schedules-or-manual
image: $FEDORA_IMAGE
stage: analysis
needs: []
variables:
# FIXME: Eventually we want static analysis on the tests and copylibs, for
# code quality, but for the moment its just busywork.
# FIXME: Disable the dead code checkers for now because they create a lot of
# noise and dont indicate high severity problems.
SCAN_BUILD_FLAGS: >-
--exclude gio/tests/
--exclude girepository/tests/
--exclude glib/tests/
--exclude gmodule/tests/
--exclude gobject/tests/
--exclude gthread/tests/
--exclude girepository/cmph/
--exclude glib/libcharset/
--exclude gio/xdgmime/
-disable-checker deadcode.DeadStores
--status-bugs
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix=$HOME/glib-installed
--localstatedir=/var
--libdir=lib
-Dglib_debug=enabled
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dintrospection=enabled
_scan_build
- SCANBUILD="$(pwd)/.gitlab-ci/scan-build.sh" ninja -C _scan_build scan-build
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_scan_build/meson-logs/scanbuild"
.coverity:
extends:
- .build-linux
- .only-schedules-or-manual-in-default-branch
image: $COVERITY_IMAGE
stage: analysis
needs: []
variables:
# cov-build doesnt like GLIB_DEPRECATED_ENUMERATOR
CFLAGS: '-DGLIB_DISABLE_DEPRECATION_WARNINGS'
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix=$HOME/glib-installed
--localstatedir=/var
--libdir=lib
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dintrospection=enabled
_coverity_build
- $HOME/cov-analysis-linux64-*/bin/cov-build --dir cov-int meson compile -C _coverity_build
- tar cfz cov-int.tar.gz cov-int
- curl https://scan.coverity.com/builds?project=$COVERITY_SCAN_PROJECT_NAME
--form token=$COVERITY_SCAN_TOKEN --form email=$GITLAB_USER_EMAIL
--form file=@cov-int.tar.gz --form version="$CI_COMMIT_SHA"
--form description="$CI_COMMIT_SHA / $CI_COMMIT_TITLE / $CI_COMMIT_REF_NAME:$CI_PIPELINE_ID"
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "cov-int/build-log.txt"
pages:
extends: .only-schedules
stage: deploy
needs: ['coverage', 'style-check-advisory']
script:
- mv _coverage/ public/
artifacts:
paths:
- public
dist-job:
image: $FEDORA_IMAGE
stage: build
only:
- tags
script:
# Ignore extra git security checks as we don't care in CI.
- git config --global --add safe.directory "${PWD}"
- git submodule update --init
- for m in $(git submodule foreach -q 'echo $path'); do git config --global --add safe.directory "${PWD}/${m}"; done
- meson subprojects download
- meson setup ${MESON_COMMON_OPTIONS} --buildtype release -Ddocumentation=true -Dman-pages=enabled _build
- meson dist -C _build
# Compile again to build the docs
- meson compile -C _build
- tar -c -J -f "glib-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/glib glib-2.0
- tar -c -J -f "gmodule-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gmodule gmodule-2.0
- tar -c -J -f "gobject-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gobject gobject-2.0
- tar -c -J -f "gio-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/gio gio-2.0
- tar -c -J -f "girepository-docs-$CI_COMMIT_TAG.tar.xz" -C _build/docs/reference/girepository girepository-2.0
artifacts:
paths:
- "${CI_PROJECT_DIR}/_build/glib-docs-$CI_COMMIT_TAG.tar.xz"
- "${CI_PROJECT_DIR}/_build/gmodule-docs-$CI_COMMIT_TAG.tar.xz"
- "${CI_PROJECT_DIR}/_build/gobject-docs-$CI_COMMIT_TAG.tar.xz"
- "${CI_PROJECT_DIR}/_build/gio-docs-$CI_COMMIT_TAG.tar.xz"
- "${CI_PROJECT_DIR}/_build/girepository-docs-$CI_COMMIT_TAG.tar.xz"
- "${CI_PROJECT_DIR}/_build/meson-dist/glib-*.tar.xz"
issue-bot:
stage: report
image: registry.gitlab.com/gitlab-org/distribution/issue-bot:latest
script: /issue-bot
rules:
- if: $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH && $CI_PIPELINE_SOURCE == "schedule"
when: on_failure