glib/po/zh_TW.po

# Traditional chinese translation for glib20.
# Copyright (C) 2001 Free Software Foundation, Inc.
# Abel Cheung <maddog@linux.org.hk>, 2001.
#
msgid ""
msgstr ""
"Project-Id-Version: glib 1.3.7\n"
"POT-Creation-Date: 2001-08-21 12:56+0800\n"
"PO-Revision-Date: 2001-08-03 07:31+0800\n"
"Last-Translator: Abel Cheung <maddog@linux.org.hk>\n"
"Language-Team: Traditional Chinese <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: glib/gconvert.c:143
#, c-format
msgid "Conversion from character set `%s' to `%s' is not supported"
msgstr "不支援將字元集 `%s' 轉換到 `%s'"

#: glib/gconvert.c:147
#, c-format
msgid "Could not open converter from `%s' to `%s': %s"
msgstr "無法開啟由 `%s' 至 `%s' 的轉換器：%s"

#: glib/gconvert.c:251 glib/gutf8.c:821 glib/gutf8.c:1267
msgid "Invalid byte sequence in conversion input"
msgstr "轉換輸入時遇到不正確的位元組次序"

#: glib/gconvert.c:256 glib/gconvert.c:469
#, c-format
msgid "Error during conversion: %s"
msgstr "轉換時發生錯誤：%s"

#: glib/gconvert.c:276 glib/gutf8.c:817 glib/gutf8.c:1017 glib/gutf8.c:1158
#: glib/gutf8.c:1263
msgid "Partial character sequence at end of input"
msgstr "輸入完結時有未完的字元次序"

#: glib/gconvert.c:444
#, c-format
msgid "Cannot convert fallback '%s' to codeset '%s'"
msgstr ""

#: glib/gfileutils.c:308
#, c-format
msgid "Error reading file '%s': %s"
msgstr "當讀入檔案 '%s' 時發生錯誤：%s"

#: glib/gfileutils.c:366
#, c-format
msgid "Failed to read from file '%s': %s"
msgstr "無法讀入檔案 '%s'：%s"

#: glib/gfileutils.c:405 glib/gfileutils.c:473
#, c-format
msgid "Failed to open file '%s': %s"
msgstr "無法開啟檔案 '%s'：%s"

#: glib/gfileutils.c:419
#, c-format
msgid "Failed to get attributes of file '%s': fstat() failed: %s"
msgstr "無法取得檔案 '%s' 的屬性：fstat() 失敗：%s"

#: glib/gfileutils.c:445
#, c-format
msgid "Failed to open file '%s': fdopen() failed: %s"
msgstr "無法開啟檔案 '%s'：fdopen() 失敗：%s"

#: glib/gfileutils.c:654
#, c-format
msgid "Template '%s' illegal, should not contain a '%s'"
msgstr ""

#: glib/gfileutils.c:666
#, c-format
msgid "Template '%s' doesn't end with XXXXXX"
msgstr ""

#: glib/gfileutils.c:687
#, c-format
msgid "Failed to create file '%s': %s"
msgstr "無法建立檔案 '%s'：%s"

#: glib/gmarkup.c:216
#, c-format
msgid "Error on line %d char %d: %s"
msgstr "在第 %d 行第 %d 個字元發生錯誤：%s"

#: glib/gmarkup.c:300
#, c-format
msgid "Error on line %d: %s"
msgstr "在第 %d 行發生錯誤：%s"

#: glib/gmarkup.c:379
msgid ""
"Empty entity '&;' seen; valid entities are: &amp; &quot; &lt; &gt; &apos;"
msgstr ""

#: glib/gmarkup.c:389
#, c-format
msgid ""
"Character '%s' is not valid at the start of an entity name; the & character "
"begins an entity; if this ampersand isn't supposed to be an entity, escape "
"it as &amp;"
msgstr ""

#: glib/gmarkup.c:425
#, c-format
msgid "Character '%s' is not valid inside an entity name"
msgstr ""

#: glib/gmarkup.c:469
#, c-format
msgid "Entity name '%s' is not known"
msgstr ""

#: glib/gmarkup.c:479
msgid ""
"Entity did not end with a semicolon; most likely you used an ampersand "
"character without intending to start an entity - escape ampersand as &amp;"
msgstr ""

#: glib/gmarkup.c:525
#, c-format
msgid ""
"Failed to parse '%s', which should have been a digit inside a character "
"reference (&#234; for example) - perhaps the digit is too large"
msgstr ""

#: glib/gmarkup.c:550
#, c-format
msgid "Character reference '%s' does not encode a permitted character"
msgstr ""

#: glib/gmarkup.c:567
msgid "Empty character reference; should include a digit such as &#454;"
msgstr ""

#: glib/gmarkup.c:577
msgid ""
"Character reference did not end with a semicolon; most likely you used an "
"ampersand character without intending to start an entity - escape ampersand "
"as &amp;"
msgstr ""

#: glib/gmarkup.c:827 glib/gmarkup.c:855 glib/gmarkup.c:886
msgid "Invalid UTF-8 encoded text"
msgstr "不正確的 UTF-8 編碼文字"

#: glib/gmarkup.c:922
msgid "Document must begin with an element (e.g. <book>)"
msgstr "文件開始必須為一元素（例如 <book>）"

#: glib/gmarkup.c:960
#, c-format
msgid ""
"'%s' is not a valid character following a '<' character; it may not begin an "
"element name"
msgstr ""

#: glib/gmarkup.c:1023
#, c-format
msgid ""
"Odd character '%s', expected a '>' character to end the start tag of element "
"'%s'"
msgstr "不尋常的字元 '%s'，應為令元素 '%s' 的開始標籤終結的 '>' 字元"

#: glib/gmarkup.c:1110
#, c-format
msgid ""
"Odd character '%s', expected a '=' after attribute name '%s' of element '%s'"
msgstr ""

#: glib/gmarkup.c:1151
#, c-format
msgid ""
"Odd character '%s', expected a '>' or '/' character to end the start tag of "
"element '%s', or optionally an attribute; perhaps you used an invalid "
"character in an attribute name"
msgstr ""

#: glib/gmarkup.c:1224
#, c-format
msgid ""
"Odd character '%s', expected an open quote mark after the equals sign when "
"giving value for attribute '%s' of element '%s'"
msgstr ""

#: glib/gmarkup.c:1351
#, c-format
msgid ""
"'%s' is not a valid character following the characters '</'; '%s' may not "
"begin an element name"
msgstr ""

#: glib/gmarkup.c:1388
#, c-format
msgid "Element '%s' was closed, no element is currently open"
msgstr ""

#: glib/gmarkup.c:1397
#, c-format
msgid "Element '%s' was closed, but the currently open element is '%s'"
msgstr ""

#: glib/gmarkup.c:1408
#, c-format
msgid ""
"'%s' is not a valid character following the close element name '%s'; the "
"allowed character is '>'"
msgstr ""

#: glib/gmarkup.c:1541
msgid "Document was empty or contained only whitespace"
msgstr "文件完全空白或只含有空白字元"

#: glib/gmarkup.c:1555
msgid "Document ended unexpectedly just after an open angle bracket '<'"
msgstr ""

#: glib/gmarkup.c:1563 glib/gmarkup.c:1606
#, c-format
msgid ""
"Document ended unexpectedly with elements still open - '%s' was the last "
"element opened"
msgstr ""

#: glib/gmarkup.c:1571
#, c-format
msgid ""
"Document ended unexpectedly, expected to see a close angle bracket ending "
"the tag <%s/>"
msgstr ""

#: glib/gmarkup.c:1577
msgid "Document ended unexpectedly inside an element name"
msgstr "文件在元素的名稱未完結時突然終止"

#: glib/gmarkup.c:1582
msgid "Document ended unexpectedly inside an attribute name"
msgstr "文件在屬性名稱未完結時突然終止"

#: glib/gmarkup.c:1587
msgid "Document ended unexpectedly inside an element-opening tag."
msgstr "文件在元素的開啟標籤內突然終止"

#: glib/gmarkup.c:1593
msgid ""
"Document ended unexpectedly after the equals sign following an attribute "
"name; no attribute value"
msgstr ""

#: glib/gmarkup.c:1599
msgid "Document ended unexpectedly while inside an attribute value"
msgstr "文件在屬性值未完結時突然終止"

#: glib/gmarkup.c:1614
#, c-format
msgid "Document ended unexpectedly inside the close tag for element '%s'"
msgstr "文件在元素 '%s' 的關閉標籤內突然終止"

#: glib/gmarkup.c:1620
msgid "Document ended unexpectedly inside a comment or processing instruction"
msgstr "文件在註釋或處理指示未完結時突然終止"

#: glib/gshell.c:69
msgid "Quoted text doesn't begin with a quotation mark"
msgstr ""

#: glib/gshell.c:159
msgid "Unmatched quotation mark in command line or other shell-quoted text"
msgstr ""

#: glib/gshell.c:526
#, c-format
msgid "Text ended just after a '' character. (The text was '%s')"
msgstr ""

#: glib/gshell.c:533
#, c-format
msgid "Text ended before matching quote was found for %c. (The text was '%s')"
msgstr ""

#: glib/gshell.c:545
msgid "Text was empty (or contained only whitespace)"
msgstr "文字是空白的（或只含有空白字元）"

#: glib/gspawn-win32.c:215
msgid "Failed to read data from child process"
msgstr "無法由副程序讀入資料"

#: glib/gspawn-win32.c:364
msgid ""
"Unexpected error in g_io_channel_win32_poll() reading data from a child "
"process"
msgstr "當 g_io_channel_win32_poll() 由副程序讀入資料時發生未預期的錯誤"

#: glib/gspawn-win32.c:840 glib/gspawn.c:907
#, c-format
msgid "Failed to read from child pipe (%s)"
msgstr "無法由副管道讀入資料（%s）"

#: glib/gspawn-win32.c:929 glib/gspawn.c:1112
#, c-format
msgid "Failed to change to directory '%s' (%s)"
msgstr "無法進入目錄 '%s'（%s）"

#: glib/gspawn-win32.c:938 glib/gspawn.c:1122
#, c-format
msgid "Failed to execute child process (%s)"
msgstr "無法執行副程序（%s）"

#: glib/gspawn-win32.c:979 glib/gspawn.c:1219
#, c-format
msgid "Failed to create pipe for communicating with child process (%s)"
msgstr "無法建立管道來和副程序溝通（%s）"

#: glib/gspawn.c:159
#, c-format
msgid "Failed to read data from child process (%s)"
msgstr "無法由副程序讀入資料（%s）"

#: glib/gspawn.c:290
#, c-format
msgid "Unexpected error in select() reading data from a child process (%s)"
msgstr "當 select() 由副程序讀入資料時發生未預期的錯誤（%s）"

#: glib/gspawn.c:373
#, c-format
msgid "Unexpected error in waitpid() (%s)"
msgstr "waitpid() 時發生未預期的錯誤（%s）"

#: glib/gspawn.c:972
#, c-format
msgid "Failed to fork (%s)"
msgstr "無法衍生（%s）"

#: glib/gspawn.c:1131
#, c-format
msgid "Failed to redirect output or input of child process (%s)"
msgstr "無法重新導向副程序的輸出或輸入（%s）"

#: glib/gspawn.c:1140
#, c-format
msgid "Failed to fork child process (%s)"
msgstr "無法衍生副程序（%s）"

#: glib/gspawn.c:1148
msgid "Unknown error executing child process"
msgstr "執行副程序時發生不明的錯誤"

#: glib/gspawn.c:1169
#, c-format
msgid "Failed to read enough data from child pid pipe (%s)"
msgstr ""

#: glib/gutf8.c:896
msgid "Character out of range for UTF-8"
msgstr "字元不在 UTF-8 範圍之內"

#: glib/gutf8.c:985 glib/gutf8.c:994 glib/gutf8.c:1126 glib/gutf8.c:1135
#: glib/gutf8.c:1277 glib/gutf8.c:1373
msgid "Invalid sequence in conversion input"
msgstr "轉換輸入時遇到不正確的次序"

#: glib/gutf8.c:1288 glib/gutf8.c:1384
msgid "Character out of range for UTF-16"
msgstr "字元不在 UTF-16 範圍之內"