glib/gio/gunixfdlist.c
Dan Winship e56498ee0b Fix usage of _GNU_SOURCE
_GNU_SOURCE must be defined before including any other (system)
header, so defining it in glib-unix.h (and hoping no one has included
anything else before that) is wrong. And the "#define _USE_GNU"
workaround for this problem in gnetworkingprivate.h is even wronger
(and still prone to failure anyway due to single-include guards).

Fix this by defining _GNU_SOURCE in config.h when building against
glibc. In theory this is bad because new releases of glibc may include
symbols that conflict with glib symbols, which could then cause
compile failures. However, most people only see new releases of glibc
when they upgrade their distro, at which point they also generally get
new releases of gcc, which have new warnings/errors to clean up
anyway.

https://bugzilla.gnome.org/show_bug.cgi?id=649201
2011-05-03 07:07:41 -04:00

400 lines
10 KiB
C

/* GIO - GLib Input, Output and Streaming Library
*
* Copyright © 2009 Codethink Limited
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published
* by the Free Software Foundation; either version 2 of the licence or (at
* your option) any later version.
*
* See the included COPYING file for more information.
*
* Authors: Ryan Lortie <desrt@desrt.ca>
*/
/**
* SECTION:gunixfdlist
* @title: GUnixFDList
* @short_description: An object containing a set of UNIX file descriptors
* @include: gio/gunixfdlist.h
* @see_also: #GUnixFDMessage
*
* A #GUnixFDList contains a list of file descriptors. It owns the file
* descriptors that it contains, closing them when finalized.
*
* It may be wrapped in a #GUnixFDMessage and sent over a #GSocket in
* the %G_SOCKET_ADDRESS_UNIX family by using g_socket_send_message()
* and received using g_socket_receive_message().
*
* Note that <filename>&lt;gio/gunixfdlist.h&gt;</filename> belongs to
* the UNIX-specific GIO interfaces, thus you have to use the
* <filename>gio-unix-2.0.pc</filename> pkg-config file when using it.
*/
#include "config.h"
#include <sys/types.h>
#include <sys/socket.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <errno.h>
#include "gunixfdlist.h"
#include "gioerror.h"
G_DEFINE_TYPE (GUnixFDList, g_unix_fd_list, G_TYPE_OBJECT)
struct _GUnixFDListPrivate
{
gint *fds;
gint nfd;
};
static void
g_unix_fd_list_init (GUnixFDList *list)
{
list->priv = G_TYPE_INSTANCE_GET_PRIVATE (list,
G_TYPE_UNIX_FD_LIST,
GUnixFDListPrivate);
}
static void
g_unix_fd_list_finalize (GObject *object)
{
GUnixFDList *list = G_UNIX_FD_LIST (object);
gint i;
for (i = 0; i < list->priv->nfd; i++)
close (list->priv->fds[i]);
g_free (list->priv->fds);
G_OBJECT_CLASS (g_unix_fd_list_parent_class)
->finalize (object);
}
static void
g_unix_fd_list_class_init (GUnixFDListClass *class)
{
GObjectClass *object_class = G_OBJECT_CLASS (class);
g_type_class_add_private (class, sizeof (GUnixFDListPrivate));
object_class->finalize = g_unix_fd_list_finalize;
}
static int
dup_close_on_exec_fd (gint fd,
GError **error)
{
gint new_fd;
gint s;
#ifdef F_DUPFD_CLOEXEC
do
new_fd = fcntl (fd, F_DUPFD_CLOEXEC, 0l);
while (new_fd < 0 && (errno == EINTR));
if (new_fd >= 0)
return new_fd;
/* if that didn't work (new libc/old kernel?), try it the other way. */
#endif
do
new_fd = dup (fd);
while (new_fd < 0 && (errno == EINTR));
if (new_fd < 0)
{
int saved_errno = errno;
g_set_error (error, G_IO_ERROR,
g_io_error_from_errno (saved_errno),
"dup: %s", g_strerror (saved_errno));
close (new_fd);
return -1;
}
do
{
s = fcntl (new_fd, F_GETFD);
if (s >= 0)
s = fcntl (new_fd, F_SETFD, (long) (s | FD_CLOEXEC));
}
while (s < 0 && (errno == EINTR));
if (s < 0)
{
int saved_errno = errno;
g_set_error (error, G_IO_ERROR,
g_io_error_from_errno (saved_errno),
"fcntl: %s", g_strerror (saved_errno));
close (new_fd);
return -1;
}
return new_fd;
}
/**
* g_unix_fd_list_new:
*
* Creates a new #GUnixFDList containing no file descriptors.
*
* Returns: a new #GUnixFDList
*
* Since: 2.24
**/
GUnixFDList *
g_unix_fd_list_new (void)
{
return g_object_new (G_TYPE_UNIX_FD_LIST, NULL);
}
/**
* g_unix_fd_list_new_from_array:
* @fds: (array length=n_fds): the initial list of file descriptors
* @n_fds: the length of #fds, or -1
*
* Creates a new #GUnixFDList containing the file descriptors given in
* @fds. The file descriptors become the property of the new list and
* may no longer be used by the caller. The array itself is owned by
* the caller.
*
* Each file descriptor in the array should be set to close-on-exec.
*
* If @n_fds is -1 then @fds must be terminated with -1.
*
* Returns: a new #GUnixFDList
*
* Since: 2.24
**/
GUnixFDList *
g_unix_fd_list_new_from_array (const gint *fds,
gint n_fds)
{
GUnixFDList *list;
g_return_val_if_fail (fds != NULL || n_fds == 0, NULL);
if (n_fds == -1)
for (n_fds = 0; fds[n_fds] != -1; n_fds++);
list = g_object_new (G_TYPE_UNIX_FD_LIST, NULL);
list->priv->fds = g_new (gint, n_fds + 1);
list->priv->nfd = n_fds;
memcpy (list->priv->fds, fds, sizeof (gint) * n_fds);
list->priv->fds[n_fds] = -1;
return list;
}
/**
* g_unix_fd_list_steal_fds:
* @list: a #GUnixFDList
* @length: (out) (allow-none): pointer to the length of the returned
* array, or %NULL
*
* Returns the array of file descriptors that is contained in this
* object.
*
* After this call, the descriptors are no longer contained in
* @list. Further calls will return an empty list (unless more
* descriptors have been added).
*
* The return result of this function must be freed with g_free().
* The caller is also responsible for closing all of the file
* descriptors. The file descriptors in the array are set to
* close-on-exec.
*
* If @length is non-%NULL then it is set to the number of file
* descriptors in the returned array. The returned array is also
* terminated with -1.
*
* This function never returns %NULL. In case there are no file
* descriptors contained in @list, an empty array is returned.
*
* Returns: (array length=length) (transfer full): an array of file
* descriptors
*
* Since: 2.24
*/
gint *
g_unix_fd_list_steal_fds (GUnixFDList *list,
gint *length)
{
gint *result;
g_return_val_if_fail (G_IS_UNIX_FD_LIST (list), NULL);
/* will be true for fresh object or if we were just called */
if (list->priv->fds == NULL)
{
list->priv->fds = g_new (gint, 1);
list->priv->fds[0] = -1;
list->priv->nfd = 0;
}
if (length)
*length = list->priv->nfd;
result = list->priv->fds;
list->priv->fds = NULL;
list->priv->nfd = 0;
return result;
}
/**
* g_unix_fd_list_peek_fds:
* @list: a #GUnixFDList
* @length: (out) (allow-none): pointer to the length of the returned
* array, or %NULL
*
* Returns the array of file descriptors that is contained in this
* object.
*
* After this call, the descriptors remain the property of @list. The
* caller must not close them and must not free the array. The array is
* valid only until @list is changed in any way.
*
* If @length is non-%NULL then it is set to the number of file
* descriptors in the returned array. The returned array is also
* terminated with -1.
*
* This function never returns %NULL. In case there are no file
* descriptors contained in @list, an empty array is returned.
*
* Returns: (array length=length) (transfer none): an array of file
* descriptors
*
* Since: 2.24
*/
const gint *
g_unix_fd_list_peek_fds (GUnixFDList *list,
gint *length)
{
g_return_val_if_fail (G_IS_UNIX_FD_LIST (list), NULL);
/* will be true for fresh object or if steal() was just called */
if (list->priv->fds == NULL)
{
list->priv->fds = g_new (gint, 1);
list->priv->fds[0] = -1;
list->priv->nfd = 0;
}
if (length)
*length = list->priv->nfd;
return list->priv->fds;
}
/**
* g_unix_fd_list_append:
* @list: a #GUnixFDList
* @fd: a valid open file descriptor
* @error: a #GError pointer
*
* Adds a file descriptor to @list.
*
* The file descriptor is duplicated using dup(). You keep your copy
* of the descriptor and the copy contained in @list will be closed
* when @list is finalized.
*
* A possible cause of failure is exceeding the per-process or
* system-wide file descriptor limit.
*
* The index of the file descriptor in the list is returned. If you use
* this index with g_unix_fd_list_get() then you will receive back a
* duplicated copy of the same file descriptor.
*
* Returns: the index of the appended fd in case of success, else -1
* (and @error is set)
*
* Since: 2.24
*/
gint
g_unix_fd_list_append (GUnixFDList *list,
gint fd,
GError **error)
{
gint new_fd;
g_return_val_if_fail (G_IS_UNIX_FD_LIST (list), -1);
g_return_val_if_fail (fd >= 0, -1);
g_return_val_if_fail (error == NULL || *error == NULL, -1);
if ((new_fd = dup_close_on_exec_fd (fd, error)) < 0)
return -1;
list->priv->fds = g_realloc (list->priv->fds,
sizeof (gint) *
(list->priv->nfd + 2));
list->priv->fds[list->priv->nfd++] = new_fd;
list->priv->fds[list->priv->nfd] = -1;
return list->priv->nfd - 1;
}
/**
* g_unix_fd_list_get:
* @list: a #GUnixFDList
* @index_: the index into the list
* @error: a #GError pointer
*
* Gets a file descriptor out of @list.
*
* @index_ specifies the index of the file descriptor to get. It is a
* programmer error for @index_ to be out of range; see
* g_unix_fd_list_get_length().
*
* The file descriptor is duplicated using dup() and set as
* close-on-exec before being returned. You must call close() on it
* when you are done.
*
* A possible cause of failure is exceeding the per-process or
* system-wide file descriptor limit.
*
* Returns: the file descriptor, or -1 in case of error
*
* Since: 2.24
**/
gint
g_unix_fd_list_get (GUnixFDList *list,
gint index_,
GError **error)
{
g_return_val_if_fail (G_IS_UNIX_FD_LIST (list), -1);
g_return_val_if_fail (index_ < list->priv->nfd, -1);
g_return_val_if_fail (error == NULL || *error == NULL, -1);
return dup_close_on_exec_fd (list->priv->fds[index_], error);
}
/**
* g_unix_fd_list_get_length:
* @list: a #GUnixFDList
*
* Gets the length of @list (ie: the number of file descriptors
* contained within).
*
* Returns: the length of @list
*
* Since: 2.24
**/
gint
g_unix_fd_list_get_length (GUnixFDList *list)
{
g_return_val_if_fail (G_IS_UNIX_FD_LIST (list), 0);
return list->priv->nfd;
}