luc14n0/glib
1
0
Fork 0
mirror of https://gitlab.gnome.org/GNOME/glib.git synced 2024-12-25 15:06:14 +01:00
Code Issues Packages Projects Releases Wiki Activity
46160f9aad
glib/.gitlab-ci.yml
Philip Withnall f582a0dd9c
ci: Fix output paths for docs tarballs in dist-job 
Otherwise they’re not picked up as artifacts, and hence are basically
lost.

Signed-off-by: Philip Withnall <pwithnall@gnome.org>
2024-12-11 15:39:40 +00:00

1013 lines
32 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

include:
- component: gitlab.gnome.org/GNOME/citemplates/release-service@master
inputs:
dist-job-name: "dist-job"
tarball-artifact-path: "${TARBALL_ARTIFACT_PATH}"
stages:
- style-check
- build
- coverage
- analysis
- deploy
- report
cache:
paths:
- _ccache/
variables:
FEDORA_IMAGE: "registry.gitlab.gnome.org/gnome/glib/fedora:v39.5"
COVERITY_IMAGE: "registry.gitlab.gnome.org/gnome/glib/coverity:v7"
DEBIAN_IMAGE: "registry.gitlab.gnome.org/gnome/glib/debian-stable:v23"
DEBIAN_I386_IMAGE: "registry.gitlab.gnome.org/gnome/glib/debian-stable-i386:v3"
ALPINE_IMAGE: "registry.gitlab.gnome.org/gnome/glib/alpine:v7"
MINGW_IMAGE: "registry.gitlab.gnome.org/gnome/glib/mingw:v39.5"
GOBJECT_INTROSPECTION_TAG: "1.80.1"
MESON_TEST_TIMEOUT_MULTIPLIER: 4
G_MESSAGES_DEBUG: all
MESON_COMMON_OPTIONS: "--buildtype debug --wrap-mode=nodownload --fatal-meson-warnings"
# expected naming scheme for the release-service job
TARBALL_ARTIFACT_PATH: "_build/meson-dist/${CI_PROJECT_NAME}-${CI_COMMIT_TAG}.tar.xz"
# Default CI job setup; contrast with `.only-origin`.
#
# Don’t execute the pipeline when a merge request is merged into `origin/main`,
# as it will have already been tested
.only-default:
only:
- branches
except:
refs:
- tags
variables:
- $CI_PIPELINE_SOURCE == "push" && $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH && $CI_PROJECT_NAMESPACE == "GNOME"
# As above, but does get executed on merge into `origin/main`. For use with
# updating code coverage results and docs builds.
.only-default-and-merges:
only:
- branches
except:
refs:
- tags
# Some jobs run on CI runners which don’t have good isolation between CI jobs,
# and don’t have much available resource. Limit those jobs to only ones on the
# origin repository (GNOME/glib), rather than people’s forks. Code in the origin
# repository can be trusted.
.only-origin:
only:
- branches@GNOME/glib
except:
- tags
# Some jobs take a long time and are unlikely to find failures (or will find
# failures which are not merge-blockers to fix), so they’re executed on a weekly
# schedule in order to save CI resources and speed up branch pipelines.
.only-schedules:
only:
- schedules
except:
- tags
# Some jobs take a long time and are unlikely to find failures (or will find
# failures which are not merge-blockers to fix), so they’re executed on a weekly
# schedule in order to save CI resources and speed up branch pipelines.
# But for specific merge requests, one may still want to run them, so make
# possible to run them manually.
.only-schedules-or-manual:
rules:
- if: $CI_PIPELINE_SOURCE == "merge_request_event"
when: never
# As per rule before, the following rules will only apply to non MR events
- if: $CI_PIPELINE_SOURCE == "schedule"
when: always
- if: $CI_PIPELINE_SOURCE != "schedule"
when: manual
allow_failure: true
# Some jobs should be runnable only on schedules and when triggered by a branch
# in the origin repository, but without
.only-schedules-or-manual-in-default-branch:
rules:
- if: $CI_PROJECT_PATH != "GNOME/glib" || $CI_COMMIT_BRANCH != $CI_DEFAULT_BRANCH
when: never
# As per rule before, the following rules will apply only to GNOME/glib:main
- if: $CI_PIPELINE_SOURCE == "schedule"
when: always
- if: $CI_PIPELINE_SOURCE != "schedule"
when: manual
allow_failure: true
# Some jobs run on CI runners don’t have much available resource.
# Limit those jobs to only ones on the origin repository (GNOME/glib),
# rather than people’s forks or if ran manually.
.only-origin-or-manual:
rules:
- if: $CI_PIPELINE_SOURCE == "merge_request_event"
when: never
- if: $CI_PIPELINE_SOURCE == "schedule"
when: never
- if: $CI_PROJECT_NAMESPACE == "GNOME"
when: always
- if: $CI_PROJECT_NAMESPACE != "GNOME"
when: manual
allow_failure: true
.build-gobject-introspection:
before_script:
# If the CI image doesn’t provide a new enough gobject-introspection
# package, build it ourselves.
# See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/3746#note_2161354
- >
if ! pkg-config --atleast-version "${GOBJECT_INTROSPECTION_TAG}" gobject-introspection-1.0; then
mkdir -p gobject-introspection
git clone --branch "${GOBJECT_INTROSPECTION_TAG}" https://gitlab.gnome.org/GNOME/gobject-introspection.git gobject-introspection
meson gobject-introspection gobject-introspection/build --prefix=/usr
sudo meson install -C gobject-introspection/build
fi
artifacts:
expire_in: 3 days
paths:
- gobject-introspection
.build-linux:
before_script:
- bash .gitlab-ci/show-execution-environment.sh
- cp -r "${HOME}"/subprojects/* subprojects/
# FIXME: Work around https://gitlab.com/gitlab-org/gitlab/-/issues/391756
.with-git:
before_script:
- rm -rf subprojects/gvdb
- git config --global --add safe.directory "${PWD}"
- git submodule update --init --depth 1
variables:
GIT_SUBMODULE_STRATEGY: "none"
GIT_SUBMODULE_DEPTH: 1
style-check-advisory:
extends:
- .only-default
- .with-git
image: "${DEBIAN_IMAGE}"
stage: style-check
allow_failure: true
script:
- failed=
- .gitlab-ci/run-style-check-diff.sh || failed=1
- .gitlab-ci/run-check-todos.sh || failed=1
- test -z "$failed"
sh-and-py-check:
extends:
- .only-default
- .with-git
image: "${DEBIAN_IMAGE}"
stage: style-check
allow_failure: false
script:
- failed=
- tests/shellcheck.sh || failed=1
- tests/black.sh || failed=1
- tests/flake8.sh || failed=1
- test -z "$failed"
variables:
LINT_WARNINGS_ARE_ERRORS: '1'
only:
changes:
- "**/*.py"
- "**/*.sh"
style-check-mandatory:
extends:
- .only-default
- .with-git
image: "${DEBIAN_IMAGE}"
stage: style-check
allow_failure: false
script:
- tests/reuse.sh
variables:
LINT_WARNINGS_ARE_ERRORS: '1'
fedora-x86_64:
extends:
- .build-gobject-introspection
- .build-linux
- .only-default-and-merges
- .with-git
image: "${FEDORA_IMAGE}"
stage: build
needs: []
variables:
CFLAGS: "--coverage -ftest-coverage -fprofile-arcs -fprofile-update=atomic"
CXXFLAGS: "--coverage -ftest-coverage -fprofile-arcs -fprofile-update=atomic"
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
- !reference [".build-gobject-introspection", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix="${HOME}/glib-installed"
--localstatedir=/var
--libdir=lib
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Ddocumentation=true
-Dintrospection=enabled
-Dman-pages=enabled
_build
- meson compile -C _build
- mkdir -p _coverage
- lcov --config-file .lcovrc --directory _build --capture --initial
--output-file "_coverage/${CI_JOB_NAME}-baseline.lcov"
- .gitlab-ci/run-tests.sh
- lcov --config-file .lcovrc --directory _build --capture
--output-file "_coverage/${CI_JOB_NAME}.lcov"
# Copy the built documentation to an artifact directory. The build for docs.gtk.org
# can then pull it from there — see https://gitlab.gnome.org/GNOME/gtk/-/blob/docs-gtk-org/README.md
- mkdir -p _reference/
- mv _build/docs/reference/glib/glib-2.0/ _reference/glib/
- mv _build/docs/reference/glib/glib-unix-2.0/ _reference/glib-unix/
- mv _build/docs/reference/gmodule/gmodule-2.0/ _reference/gmodule/
- mv _build/docs/reference/gobject/gobject-2.0/ _reference/gobject/
- mv _build/docs/reference/gio/gio-2.0/ _reference/gio/
- mv _build/docs/reference/gio/gio-unix-2.0/ _reference/gio-unix/
- mv _build/docs/reference/girepository/girepository-2.0/ _reference/girepository/
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
- "_coverage"
- "_reference"
.build-debian:
extends:
- .build-linux
- .with-git
stage: build
needs: []
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix="${HOME}/glib-installed"
--localstatedir=/var
--libdir=lib
-Dsystemtap=enabled
-Ddtrace=enabled
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
debian-stable-x86_64:
extends:
- .build-debian
# We don't need to run this job too often, because the combination of
# fedora-x86_64 and debian-stable-i386 should cover more or less
# everything that this job does
- .only-schedules-or-manual
image: "${DEBIAN_IMAGE}"
debian-stable-i386:
extends:
- .build-debian
- .only-default
image: "${DEBIAN_I386_IMAGE}"
hurd-i386:
extends:
- .only-schedules-or-manual
- .with-git
stage: build
tags:
- hurd
needs: []
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix="${HOME}/glib-installed"
--localstatedir=/var
--libdir=lib
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
muslc-alpine-x86_64:
extends:
- .build-linux
- .only-schedules-or-manual
- .with-git
image: "${ALPINE_IMAGE}"
stage: build
needs: []
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix="${HOME}/glib-installed"
--localstatedir=/var
--libdir=lib
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
installed-tests:
extends:
- .build-linux
- .only-schedules-or-manual
image: "${FEDORA_IMAGE}"
stage: build
needs: []
script:
# dtrace is disabled because it breaks the static-link.py test
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--prefix=/usr --libdir=/usr/lib64
-Dinstalled_tests=true
-Ddefault_library=both
-Ddtrace=disabled
_build
- meson compile -C _build
- sudo meson install -C _build
# Remove old headers, possibly present in current installation
- sudo rm -f /usr/include/glib-2.0/glib/gurifuncs.h
- sudo chown -R `id -un`:`id -gn` _build/
# Work-around https://gitlab.gnome.org/GNOME/gnome-desktop-testing/merge_requests/2
- mkdir -p _build/installed-tests-report/logs/
- GLIB_TEST_COMPILATION=1 gnome-desktop-testing-runner
--report-directory=_build/installed-tests-report/failed/
--log-directory=_build/installed-tests-report/logs/
--parallel=0
glib
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
- "_build/installed-tests-report/"
G_DISABLE_ASSERT:
extends:
- .build-linux
- .only-schedules-or-manual
- .with-git
- .build-gobject-introspection
image: "${FEDORA_IMAGE}"
stage: build
needs: []
variables:
MESON_TEST_TIMEOUT_MULTIPLIER: 15
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
- !reference [".build-gobject-introspection", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dglib_assert=false
-Dintrospection=enabled
_build
- meson compile -C _build
# Also take the opportunity to run the thorough tests (which are slow)
- bash -x ./.gitlab-ci/run-tests.sh --setup thorough
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
valgrind:
extends:
- .build-linux
- .only-schedules-or-manual
- .with-git
- .build-gobject-introspection
image: "${FEDORA_IMAGE}"
stage: analysis
needs: []
variables:
MESON_TEST_TIMEOUT_MULTIPLIER: 15
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
- !reference [".build-gobject-introspection", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dintrospection=enabled
_build
- meson compile -C _build
# Valgrind doesn’t work when the soft FD limit is set too high
# See https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2710
- ulimit -Sn 1024
- bash -x ./.gitlab-ci/run-tests.sh
--setup valgrind
--no-suite slow
artifacts:
reports:
junit: "_build/meson-logs/testlog-valgrind.junit.xml"
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
.cross-build-linux:
extends: .build-linux
stage: build
needs: []
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/meson-logs"
cross-android_arm64:
extends:
- .cross-build-linux
- .only-default
image: "${FEDORA_IMAGE}"
script:
# FIXME: add --werror
- meson setup ${MESON_COMMON_OPTIONS} --cross-file=.gitlab-ci/cross_file_android_arm64_31.txt _build
- meson compile -C _build
cross-mingw64:
extends:
- .cross-build-linux
- .only-default
image: "${MINGW_IMAGE}"
variables:
PYTHONUTF8: "1"
script:
# FIXME: Add --werror
- meson setup ${MESON_COMMON_OPTIONS} --cross-file=/opt/cross_file_mingw64.txt _build
- meson compile -C _build
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _build/glib/libglib-2.0-0.dll
- _build/gio/libgio-2.0-0.dll
- _build/gmodule/libgmodule-2.0-0.dll
- _build/gthread/libgthread-2.0-0.dll
- _build/gobject/libgobject-2.0-0.dll
# A note about msys2: it’s a rolling release distribution, running Windows under
# Docker isn’t really supported, and the win32-ps CI runner is shared. All that
# adds up to mean that we have to run CI against the latest msys2 packages, and
# that this occasionally causes deterministic build failures in GLib due to
# changes in msys2.
# In order to avoid that pre-empting other GLib development, the policy in such
# cases is to:
# 1. Immediately and without hesitation make the msys2-* CI jobs non-fatal
# (add `allow_failure: true` below).
# 2. File an issue about fixing the GLib msys2 build and re-enabling failure
# on the CI job
# 3. Set the milestone for that issue to be the next GLib release, so it’s done
# in a timely manner; and tag it as ~win32 so the GLib Windows maintainers
# are notified and can work on it.
# 4. Rebase any pending broken MRs on top of the commit which makes the CI job
# non-fatal, so that development on `main` is unblocked.
#
# This policy doesn’t apply to intermittent flaky test failures, only to
# consistent build failures caused by changed dependencies or build environment.
msys2-mingw32:
extends: .only-default-and-merges
stage: build
tags:
- win32-ps
needs: []
variables:
MSYSTEM: "MINGW32"
CHERE_INVOKING: "yes"
CFLAGS: -coverage -ftest-coverage -fprofile-arcs
PYTHONUTF8: "1"
G_DEBUGGER: 'gdb.exe -batch -ex "set logging enabled on" -ex "attach %p" -ex "signal-event %e" -ex "c" -ex "thread apply all bt full" -ex "k"'
script:
- C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20
- C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh
- C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh"
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _build/gdb.txt
- _coverage/
- _reference/
# See the note about msys2 CI job failure policy above.
msys2-clang64:
extends: .only-schedules-or-manual
stage: build
tags:
- win32-ps
needs: []
variables:
MSYSTEM: "CLANG64"
CHERE_INVOKING: "yes"
PYTHONUTF8: "1"
script:
- C:\msys64\usr\bin\pacman --noconfirm -Syyuu --ask 20
- C:\msys64\usr\bin\bash .gitlab-ci/show-execution-environment.sh
- C:\msys64\usr\bin\bash -lc "bash -x ./.gitlab-ci/test-msys2.sh"
artifacts:
reports:
junit: "_build/meson-logs/testlog.junit.xml"
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
vs2019-x64:
extends: .only-default
stage: build
tags:
- win32-ps
needs: []
variables:
GIT_SUBMODULE_STRATEGY: recursive
GIT_SUBMODULE_DEPTH: 1
PYTHONUTF8: "1"
script:
# FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
# aren’t currently set up for that.
# FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
# for the runner's Meson version.
- .gitlab-ci/test-msvc.bat --buildtype debug
--wrap-mode=default
--python.platlibdir=C:\Python37\site-packages
--python.purelibdir=C:\Python37\site-packages
--plat=x64
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _build/glib/libglib-2.0-0.dll
- _build/gio/libgio-2.0-0.dll
- _build/gmodule/libgmodule-2.0-0.dll
- _build/gthread/libgthread-2.0-0.dll
- _build/gobject/libgobject-2.0-0.dll
vs2019-x64-static:
extends: .only-default
stage: build
tags:
- win32-ps
needs: []
variables:
GIT_SUBMODULE_STRATEGY: recursive
GIT_SUBMODULE_DEPTH: 1
PYTHONUTF8: "1"
script:
# FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
# aren’t currently set up for that.
# FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
# for the runner's Meson version.
- .gitlab-ci/test-msvc.bat --buildtype debug
--wrap-mode=default
--default-library=static
--python.platlibdir=C:\Python37\site-packages
--python.purelibdir=C:\Python37\site-packages
--plat=x64
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
vs2019-x86:
extends: .only-schedules-or-manual
stage: build
tags:
- win32-ps
needs: []
variables:
GIT_SUBMODULE_STRATEGY: recursive
GIT_SUBMODULE_DEPTH: 1
PYTHONUTF8: "1"
script:
# FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
# aren’t currently set up for that.
# FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
# for the runner's Meson version.
- .gitlab-ci/test-msvc.bat --buildtype debug
--wrap-mode=default
--python.platlibdir=C:\Python37\site-packages
--python.purelibdir=C:\Python37\site-packages
--plat=x64_x86
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _build/glib/libglib-2.0-0.dll
- _build/gio/libgio-2.0-0.dll
- _build/gmodule/libgmodule-2.0-0.dll
- _build/gthread/libgthread-2.0-0.dll
- _build/gobject/libgobject-2.0-0.dll
vs2019-arm64:
extends: .only-schedules-or-manual
stage: build
tags:
- win32-ps
needs: []
variables:
GIT_SUBMODULE_STRATEGY: recursive
GIT_SUBMODULE_DEPTH: 1
PYTHONUTF8: "1"
script:
# FIXME: These should use --wrap-mode=nodownload but the Windows CI machines
# aren’t currently set up for that.
# FIXME: Use --meson-fatal-warnings once we've enabled c_std=gnu99,c99
# for the runner's Meson version.
- .gitlab-ci/test-msvc.bat --buildtype debug
--wrap-mode=default
--python.platlibdir=C:\Python37\site-packages
--python.purelibdir=C:\Python37\site-packages
--plat=x64_arm64
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${env:CI_JOB_NAME}-${env:CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- _build/meson-logs
- _build/glib/libglib-2.0-0.dll
- _build/gio/libgio-2.0-0.dll
- _build/gmodule/libgmodule-2.0-0.dll
- _build/gthread/libgthread-2.0-0.dll
- _build/gobject/libgobject-2.0-0.dll
freebsd-13-x86_64:
extends: .only-schedules-or-manual
stage: build
tags:
- freebsd-13
needs: []
variables:
CPPFLAGS: -I/usr/local/include
LDFLAGS: -L/usr/local/lib -Wl,--disable-new-dtags
LANG: C.UTF-8
before_script:
- bash .gitlab-ci/show-execution-environment.sh
script:
- meson setup ${MESON_COMMON_OPTIONS}
--localstatedir=/var
-Db_lundef=false
-Dxattr=false
-Dsystemtap=disabled
-Ddtrace=disabled
_build
- meson compile -C _build
- bash -x ./.gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
macos-arm64:
only:
- branches@GNOME/glib
# runner's maintainer
- branches@dehesselle/glib
except:
- tags
stage: build
tags:
- macosarm
needs: []
cache: []
variables:
GIT_SUBMODULE_STRATEGY: normal
# -Wno-overlength-strings
# libpcre2 gets built as a subproject, but the default Clang options on
# macOS limit string lengths to 4095B — pcre2_error.c has a string of length
# 4380B
CFLAGS: -Wno-overlength-strings
# redirect to the runner's volatile temporary directory
TMPDIR: /Users/Shared/work/tmp
# keep the user profile clean
PIP_CACHE_DIR: /Users/Shared/work/cache
PIPENV_CACHE_DIR: "${PIP_CACHE_DIR}"
PYTHONPYCACHEPREFIX: "${PIP_CACHE_DIR}"
# target macOS 11 Big Sur
SDKROOT: /opt/sdks/MacOSX11.3.sdk
# use the runner's ccache directory
CCACHE_DIR: /Users/Shared/work/ccache
before_script:
- bash .gitlab-ci/show-execution-environment.sh
- python3 -m venv .venv
- curl -L https://github.com/ccache/ccache/releases/download/v4.9.1/ccache-4.9.1-darwin.tar.gz | tar -C .venv/bin -xz --strip-components=1 ccache-4.9.1-darwin/ccache
- source .venv/bin/activate
- pip3 install meson==1.4.2 ninja==1.11.1.1 packaging==23.2
script:
# FIXME: These should use --wrap-mode=nodownload but the macOS CI machine
# isn't currently set up for that. See:
# - https://gitlab.gnome.org/GNOME/glib/merge_requests/388
# - https://gitlab.gnome.org/Infrastructure/Infrastructure/issues/225
- meson setup ${MESON_COMMON_OPTIONS}
--wrap-mode=default
--werror
_build
- meson compile -C _build
- .gitlab-ci/run-tests.sh
artifacts:
reports:
junit:
- _build/meson-logs/testlog.junit.xml
- _build/meson-logs/testlog-*.junit.xml
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_build/config.h"
- "_build/glib/glibconfig.h"
- "_build/meson-logs"
coverage:
extends: .only-default
image: "${FEDORA_IMAGE}"
stage: coverage
needs: ['fedora-x86_64', 'msys2-mingw32']
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
expire_in: 1 week
expose_as: 'Coverage Report'
paths:
- _coverage/coverage/index.html
- _coverage
reports:
coverage_report:
coverage_format: cobertura
path: _coverage/*-cobertura/cobertura-*.xml
before_script:
- bash .gitlab-ci/show-execution-environment.sh
script:
- bash -x ./.gitlab-ci/coverage-docker.sh
coverage: '/^\s+lines\.+:\s+([\d.]+\%)\s+/'
scan-build:
extends:
- .build-linux
- .only-schedules-or-manual
- .build-gobject-introspection
image: "${FEDORA_IMAGE}"
stage: analysis
needs: []
variables:
# FIXME: Eventually we want static analysis on the tests and copylibs, for
# code quality, but for the moment it’s just busywork.
# FIXME: Disable the dead code checkers for now because they create a lot of
# noise and don’t indicate high severity problems.
SCAN_BUILD_FLAGS: >-
--exclude gio/tests/
--exclude girepository/tests/
--exclude glib/tests/
--exclude gmodule/tests/
--exclude gobject/tests/
--exclude gthread/tests/
--exclude girepository/cmph/
--exclude glib/libcharset/
--exclude gio/xdgmime/
--exclude meson-private/
-disable-checker deadcode.DeadStores
--status-bugs
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".build-gobject-introspection", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix="${HOME}/glib-installed"
--localstatedir=/var
--libdir=lib
-Dglib_debug=enabled
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dintrospection=enabled
_scan_build
- SCANBUILD="$(pwd)/.gitlab-ci/scan-build.sh" ninja -C _scan_build scan-build
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "_scan_build/meson-logs/scanbuild"
.coverity:
extends:
- .build-linux
- .only-schedules-or-manual-in-default-branch
- .build-gobject-introspection
image: "${COVERITY_IMAGE}"
stage: analysis
needs: []
variables:
# cov-build doesn’t like GLIB_DEPRECATED_ENUMERATOR
CFLAGS: '-DGLIB_DISABLE_DEPRECATION_WARNINGS'
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".build-gobject-introspection", "before_script"]
script:
- meson setup ${MESON_COMMON_OPTIONS}
--werror
--default-library=both
--prefix="${HOME}/glib-installed"
--localstatedir=/var
--libdir=lib
-Dsystemtap=enabled
-Ddtrace=enabled
-Dinstalled_tests=true
-Dintrospection=enabled
_coverity_build
# true is needed to fix GitLab having trouble parsing the quotes
- true && "${HOME}"/cov-analysis-linux64-*/bin/cov-build --dir cov-int meson compile -C _coverity_build
- tar cfz cov-int.tar.gz cov-int
- curl "https://scan.coverity.com/builds?project=${COVERITY_SCAN_PROJECT_NAME}"
--form token="${COVERITY_SCAN_TOKEN}" --form email="${GITLAB_USER_EMAIL}"
--form file=@cov-int.tar.gz --form version="${CI_COMMIT_SHA}"
--form description="${CI_COMMIT_SHA} / ${CI_COMMIT_TITLE} / ${CI_COMMIT_REF_NAME}:${CI_PIPELINE_ID}"
artifacts:
name: "glib-${CI_JOB_NAME}-${CI_COMMIT_REF_NAME}"
when: always
expire_in: 1 week
paths:
- "cov-int/build-log.txt"
pages:
extends: .only-schedules
stage: deploy
needs: ['coverage', 'style-check-advisory']
script:
- mv _coverage/ public/
artifacts:
paths:
- public
dist-job:
extends:
- .build-gobject-introspection
- .build-linux
- .with-git
image: "${FEDORA_IMAGE}"
stage: build
needs: []
before_script:
- !reference [".build-linux", "before_script"]
- !reference [".with-git", "before_script"]
- !reference [".build-gobject-introspection", "before_script"]
only:
- schedules
- tags
script:
- meson setup ${MESON_COMMON_OPTIONS}
--buildtype release
-Ddocumentation=true
-Dintrospection=enabled
-Dman-pages=enabled
_build
- meson dist -C _build
# Compile again to build the docs
- meson compile -C _build
- tar -c -J -f "_build/glib-docs-${CI_COMMIT_TAG}.tar.xz" -C _build/docs/reference/glib glib-2.0
- tar -c -J -f "_build/gmodule-docs-${CI_COMMIT_TAG}.tar.xz" -C _build/docs/reference/gmodule gmodule-2.0
- tar -c -J -f "_build/gobject-docs-${CI_COMMIT_TAG}.tar.xz" -C _build/docs/reference/gobject gobject-2.0
- tar -c -J -f "_build/gio-docs-${CI_COMMIT_TAG}.tar.xz" -C _build/docs/reference/gio gio-2.0
- tar -c -J -f "_build/girepository-docs-${CI_COMMIT_TAG}.tar.xz" -C _build/docs/reference/girepository girepository-2.0
artifacts:
paths:
- "${CI_PROJECT_DIR}/_build/glib-docs-${CI_COMMIT_TAG}.tar.xz"
- "${CI_PROJECT_DIR}/_build/gmodule-docs-${CI_COMMIT_TAG}.tar.xz"
- "${CI_PROJECT_DIR}/_build/gobject-docs-${CI_COMMIT_TAG}.tar.xz"
- "${CI_PROJECT_DIR}/_build/gio-docs-${CI_COMMIT_TAG}.tar.xz"
- "${CI_PROJECT_DIR}/_build/girepository-docs-${CI_COMMIT_TAG}.tar.xz"
- "${CI_PROJECT_DIR}/_build/meson-dist/glib-*.tar.xz"
issue-bot:
stage: report
image: registry.gitlab.com/gitlab-org/distribution/issue-bot:latest
script: /issue-bot
rules:
- if: $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH && $CI_PIPELINE_SOURCE == "schedule"
when: on_failure
Reference in New Issue View Git Blame Copy Permalink