luc14n0/glib
1
0
Fork 0
mirror of https://gitlab.gnome.org/GNOME/glib.git synced 2024-12-26 23:46:15 +01:00
Code Issues Packages Projects Releases Wiki Activity
9c1b2399ec
glib/gio/gioenums.h
Simon McVittie e0a0749268 gdbusauthmechanismexternal: Optionally send empty authorization identity 
When using a GDBus client in a non-trivial user namespace, the result of
geteuid() can differ from the uid in the namespace where the server is
running. This would result in connection attempts being rejected, because
the identity that the client claims to have does not match the identity
that the server derives from its credentials.

RFC 4422 allows us to send an empty authorization identity, which means we
want to authenticate as whatever identity the server can derive from our
out-of-band credentials. In particular, this resolves the authentication
failure when crossing between different Linux user namespaces.

Because D-Bus does not have a way to represent an empty initial response
as distinct from the absence of an initial response, we cannot use the
initial-response optimization (RFC 4422 §4.3.a) in this case, and must
fall back to waiting for the server to send a challenge.

Unfortunately, GDBus versions older than glib!2826 did not implement
the server side of this protocol correctly, and would respond to the
missing initial response in a way that breaks the SASL state machine
(expecting a response without sending a challenge), causing client and
server to deadlock with each waiting for the other to respond. Until
fixed versions of GDBus are widespread, we can't rely on having a server
that can cope with this, so gate it behind a flag, which can be set for
connections that are known to cross non-trivial namespace boundaries.

Originally inspired by
<1ed4723d38>,
and based on earlier work by Giuseppe Scrivano (in which the
cross-namespace behaviour was unconditional, rather than gated by a
flag).

Co-authored-by: Giuseppe Scrivano <giuseppe@scrivano.org>
Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-07-24 13:46:26 +01:00

2139 lines
82 KiB
C
Raw Blame History

/* GIO - GLib Input, Output and Streaming Library
*
* Copyright (C) 2006-2007 Red Hat, Inc.
*
* SPDX-License-Identifier: LGPL-2.1-or-later
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General
* Public License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
* Author: Alexander Larsson <alexl@redhat.com>
*/
#ifndef __GIO_ENUMS_H__
#define __GIO_ENUMS_H__
#if !defined (__GIO_GIO_H_INSIDE__) && !defined (GIO_COMPILATION)
#error "Only <gio/gio.h> can be included directly."
#endif
#include <glib-object.h>
G_BEGIN_DECLS
/**
* GAppInfoCreateFlags:
* @G_APP_INFO_CREATE_NONE: No flags.
* @G_APP_INFO_CREATE_NEEDS_TERMINAL: Application opens in a terminal window.
* @G_APP_INFO_CREATE_SUPPORTS_URIS: Application supports URI arguments.
* @G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION: Application supports startup notification. Since 2.26
*
* Flags used when creating a #GAppInfo.
*/
typedef enum {
G_APP_INFO_CREATE_NONE = 0, /*< nick=none >*/
G_APP_INFO_CREATE_NEEDS_TERMINAL = (1 << 0), /*< nick=needs-terminal >*/
G_APP_INFO_CREATE_SUPPORTS_URIS = (1 << 1), /*< nick=supports-uris >*/
G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION = (1 << 2) /*< nick=supports-startup-notification >*/
} GAppInfoCreateFlags;
/**
* GConverterFlags:
* @G_CONVERTER_NO_FLAGS: No flags.
* @G_CONVERTER_INPUT_AT_END: At end of input data
* @G_CONVERTER_FLUSH: Flush data
*
* Flags used when calling a g_converter_convert().
*
* Since: 2.24
*/
typedef enum {
G_CONVERTER_NO_FLAGS = 0, /*< nick=none >*/
G_CONVERTER_INPUT_AT_END = (1 << 0), /*< nick=input-at-end >*/
G_CONVERTER_FLUSH = (1 << 1) /*< nick=flush >*/
} GConverterFlags;
/**
* GConverterResult:
* @G_CONVERTER_ERROR: There was an error during conversion.
* @G_CONVERTER_CONVERTED: Some data was consumed or produced
* @G_CONVERTER_FINISHED: The conversion is finished
* @G_CONVERTER_FLUSHED: Flushing is finished
*
* Results returned from g_converter_convert().
*
* Since: 2.24
*/
typedef enum {
G_CONVERTER_ERROR = 0, /*< nick=error >*/
G_CONVERTER_CONVERTED = 1, /*< nick=converted >*/
G_CONVERTER_FINISHED = 2, /*< nick=finished >*/
G_CONVERTER_FLUSHED = 3 /*< nick=flushed >*/
} GConverterResult;
/**
* GDataStreamByteOrder:
* @G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN: Selects Big Endian byte order.
* @G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN: Selects Little Endian byte order.
* @G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN: Selects endianness based on host machine's architecture.
*
* #GDataStreamByteOrder is used to ensure proper endianness of streaming data sources
* across various machine architectures.
*
**/
typedef enum {
G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN,
G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN,
G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN
} GDataStreamByteOrder;
/**
* GDataStreamNewlineType:
* @G_DATA_STREAM_NEWLINE_TYPE_LF: Selects "LF" line endings, common on most modern UNIX platforms.
* @G_DATA_STREAM_NEWLINE_TYPE_CR: Selects "CR" line endings.
* @G_DATA_STREAM_NEWLINE_TYPE_CR_LF: Selects "CR, LF" line ending, common on Microsoft Windows.
* @G_DATA_STREAM_NEWLINE_TYPE_ANY: Automatically try to handle any line ending type.
*
* #GDataStreamNewlineType is used when checking for or setting the line endings for a given file.
**/
typedef enum {
G_DATA_STREAM_NEWLINE_TYPE_LF,
G_DATA_STREAM_NEWLINE_TYPE_CR,
G_DATA_STREAM_NEWLINE_TYPE_CR_LF,
G_DATA_STREAM_NEWLINE_TYPE_ANY
} GDataStreamNewlineType;
/**
* GFileAttributeType:
* @G_FILE_ATTRIBUTE_TYPE_INVALID: indicates an invalid or uninitialized type.
* @G_FILE_ATTRIBUTE_TYPE_STRING: a null terminated UTF8 string.
* @G_FILE_ATTRIBUTE_TYPE_BYTE_STRING: a zero terminated string of non-zero bytes.
* @G_FILE_ATTRIBUTE_TYPE_BOOLEAN: a boolean value.
* @G_FILE_ATTRIBUTE_TYPE_UINT32: an unsigned 4-byte/32-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_INT32: a signed 4-byte/32-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_UINT64: an unsigned 8-byte/64-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_INT64: a signed 8-byte/64-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_OBJECT: a #GObject.
* @G_FILE_ATTRIBUTE_TYPE_STRINGV: a %NULL terminated char **. Since 2.22
*
* The data types for file attributes.
**/
typedef enum {
G_FILE_ATTRIBUTE_TYPE_INVALID = 0,
G_FILE_ATTRIBUTE_TYPE_STRING,
G_FILE_ATTRIBUTE_TYPE_BYTE_STRING, /* zero terminated string of non-zero bytes */
G_FILE_ATTRIBUTE_TYPE_BOOLEAN,
G_FILE_ATTRIBUTE_TYPE_UINT32,
G_FILE_ATTRIBUTE_TYPE_INT32,
G_FILE_ATTRIBUTE_TYPE_UINT64,
G_FILE_ATTRIBUTE_TYPE_INT64,
G_FILE_ATTRIBUTE_TYPE_OBJECT,
G_FILE_ATTRIBUTE_TYPE_STRINGV
} GFileAttributeType;
/**
* GFileAttributeInfoFlags:
* @G_FILE_ATTRIBUTE_INFO_NONE: no flags set.
* @G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE: copy the attribute values when the file is copied.
* @G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED: copy the attribute values when the file is moved.
*
* Flags specifying the behaviour of an attribute.
**/
typedef enum {
G_FILE_ATTRIBUTE_INFO_NONE = 0,
G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE = (1 << 0),
G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED = (1 << 1)
} GFileAttributeInfoFlags;
/**
* GFileAttributeStatus:
* @G_FILE_ATTRIBUTE_STATUS_UNSET: Attribute value is unset (empty).
* @G_FILE_ATTRIBUTE_STATUS_SET: Attribute value is set.
* @G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING: Indicates an error in setting the value.
*
* Used by g_file_set_attributes_from_info() when setting file attributes.
**/
typedef enum {
G_FILE_ATTRIBUTE_STATUS_UNSET = 0,
G_FILE_ATTRIBUTE_STATUS_SET,
G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING
} GFileAttributeStatus;
/**
* GFileQueryInfoFlags:
* @G_FILE_QUERY_INFO_NONE: No flags set.
* @G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS: Don't follow symlinks.
*
* Flags used when querying a #GFileInfo.
*/
typedef enum {
G_FILE_QUERY_INFO_NONE = 0,
G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS = (1 << 0) /*< nick=nofollow-symlinks >*/
} GFileQueryInfoFlags;
/**
* GFileCreateFlags:
* @G_FILE_CREATE_NONE: No flags set.
* @G_FILE_CREATE_PRIVATE: Create a file that can only be
* accessed by the current user.
* @G_FILE_CREATE_REPLACE_DESTINATION: Replace the destination
* as if it didn't exist before. Don't try to keep any old
* permissions, replace instead of following links. This
* is generally useful if you're doing a "copy over"
* rather than a "save new version of" replace operation.
* You can think of it as "unlink destination" before
* writing to it, although the implementation may not
* be exactly like that. This flag can only be used with
* g_file_replace() and its variants, including g_file_replace_contents().
* Since 2.20
*
* Flags used when an operation may create a file.
*/
typedef enum {
G_FILE_CREATE_NONE = 0,
G_FILE_CREATE_PRIVATE = (1 << 0),
G_FILE_CREATE_REPLACE_DESTINATION = (1 << 1)
} GFileCreateFlags;
/**
* GFileMeasureFlags:
* @G_FILE_MEASURE_NONE: No flags set.
* @G_FILE_MEASURE_REPORT_ANY_ERROR: Report any error encountered
* while traversing the directory tree. Normally errors are only
* reported for the toplevel file.
* @G_FILE_MEASURE_APPARENT_SIZE: Tally usage based on apparent file
* sizes. Normally, the block-size is used, if available, as this is a
* more accurate representation of disk space used.
* Compare with `du --apparent-size`.
* @G_FILE_MEASURE_NO_XDEV: Do not cross mount point boundaries.
* Compare with `du -x`.
*
* Flags that can be used with g_file_measure_disk_usage().
*
* Since: 2.38
**/
typedef enum {
G_FILE_MEASURE_NONE = 0,
G_FILE_MEASURE_REPORT_ANY_ERROR = (1 << 1),
G_FILE_MEASURE_APPARENT_SIZE = (1 << 2),
G_FILE_MEASURE_NO_XDEV = (1 << 3)
} GFileMeasureFlags;
/**
* GMountMountFlags:
* @G_MOUNT_MOUNT_NONE: No flags set.
*
* Flags used when mounting a mount.
*/
typedef enum /*< flags >*/ {
G_MOUNT_MOUNT_NONE = 0
} GMountMountFlags;
/**
* GMountUnmountFlags:
* @G_MOUNT_UNMOUNT_NONE: No flags set.
* @G_MOUNT_UNMOUNT_FORCE: Unmount even if there are outstanding
* file operations on the mount.
*
* Flags used when an unmounting a mount.
*/
typedef enum {
G_MOUNT_UNMOUNT_NONE = 0,
G_MOUNT_UNMOUNT_FORCE = (1 << 0)
} GMountUnmountFlags;
/**
* GDriveStartFlags:
* @G_DRIVE_START_NONE: No flags set.
*
* Flags used when starting a drive.
*
* Since: 2.22
*/
typedef enum /*< flags >*/ {
G_DRIVE_START_NONE = 0
} GDriveStartFlags;
/**
* GDriveStartStopType:
* @G_DRIVE_START_STOP_TYPE_UNKNOWN: Unknown or drive doesn't support
* start/stop.
* @G_DRIVE_START_STOP_TYPE_SHUTDOWN: The stop method will physically
* shut down the drive and e.g. power down the port the drive is
* attached to.
* @G_DRIVE_START_STOP_TYPE_NETWORK: The start/stop methods are used
* for connecting/disconnect to the drive over the network.
* @G_DRIVE_START_STOP_TYPE_MULTIDISK: The start/stop methods will
* assemble/disassemble a virtual drive from several physical
* drives.
* @G_DRIVE_START_STOP_TYPE_PASSWORD: The start/stop methods will
* unlock/lock the disk (for example using the ATA <quote>SECURITY
* UNLOCK DEVICE</quote> command)
*
* Enumeration describing how a drive can be started/stopped.
*
* Since: 2.22
*/
typedef enum {
G_DRIVE_START_STOP_TYPE_UNKNOWN,
G_DRIVE_START_STOP_TYPE_SHUTDOWN,
G_DRIVE_START_STOP_TYPE_NETWORK,
G_DRIVE_START_STOP_TYPE_MULTIDISK,
G_DRIVE_START_STOP_TYPE_PASSWORD
} GDriveStartStopType;
/**
* GFileCopyFlags:
* @G_FILE_COPY_NONE: No flags set.
* @G_FILE_COPY_OVERWRITE: Overwrite any existing files
* @G_FILE_COPY_BACKUP: Make a backup of any existing files.
* @G_FILE_COPY_NOFOLLOW_SYMLINKS: Don't follow symlinks.
* @G_FILE_COPY_ALL_METADATA: Copy all file metadata instead of just default set used for copy (see #GFileInfo).
* @G_FILE_COPY_NO_FALLBACK_FOR_MOVE: Don't use copy and delete fallback if native move not supported.
* @G_FILE_COPY_TARGET_DEFAULT_PERMS: Leaves target file with default perms, instead of setting the source file perms.
*
* Flags used when copying or moving files.
*/
typedef enum {
G_FILE_COPY_NONE = 0, /*< nick=none >*/
G_FILE_COPY_OVERWRITE = (1 << 0),
G_FILE_COPY_BACKUP = (1 << 1),
G_FILE_COPY_NOFOLLOW_SYMLINKS = (1 << 2),
G_FILE_COPY_ALL_METADATA = (1 << 3),
G_FILE_COPY_NO_FALLBACK_FOR_MOVE = (1 << 4),
G_FILE_COPY_TARGET_DEFAULT_PERMS = (1 << 5)
} GFileCopyFlags;
/**
* GFileMonitorFlags:
* @G_FILE_MONITOR_NONE: No flags set.
* @G_FILE_MONITOR_WATCH_MOUNTS: Watch for mount events.
* @G_FILE_MONITOR_SEND_MOVED: Pair DELETED and CREATED events caused
* by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED
* event instead (NB: not supported on all backends; the default
* behaviour -without specifying this flag- is to send single DELETED
* and CREATED events). Deprecated since 2.46: use
* %G_FILE_MONITOR_WATCH_MOVES instead.
* @G_FILE_MONITOR_WATCH_HARD_LINKS: Watch for changes to the file made
* via another hard link. Since 2.36.
* @G_FILE_MONITOR_WATCH_MOVES: Watch for rename operations on a
* monitored directory. This causes %G_FILE_MONITOR_EVENT_RENAMED,
* %G_FILE_MONITOR_EVENT_MOVED_IN and %G_FILE_MONITOR_EVENT_MOVED_OUT
* events to be emitted when possible. Since: 2.46.
*
* Flags used to set what a #GFileMonitor will watch for.
*/
typedef enum {
G_FILE_MONITOR_NONE = 0,
G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0),
G_FILE_MONITOR_SEND_MOVED = (1 << 1),
G_FILE_MONITOR_WATCH_HARD_LINKS = (1 << 2),
G_FILE_MONITOR_WATCH_MOVES = (1 << 3)
} GFileMonitorFlags;
/**
* GFileType:
* @G_FILE_TYPE_UNKNOWN: File's type is unknown.
* @G_FILE_TYPE_REGULAR: File handle represents a regular file.
* @G_FILE_TYPE_DIRECTORY: File handle represents a directory.
* @G_FILE_TYPE_SYMBOLIC_LINK: File handle represents a symbolic link
* (Unix systems).
* @G_FILE_TYPE_SPECIAL: File is a "special" file, such as a socket, fifo,
* block device, or character device.
* @G_FILE_TYPE_SHORTCUT: File is a shortcut (Windows systems).
* @G_FILE_TYPE_MOUNTABLE: File is a mountable location.
*
* Indicates the file's on-disk type.
*
* On Windows systems a file will never have %G_FILE_TYPE_SYMBOLIC_LINK type;
* use #GFileInfo and %G_FILE_ATTRIBUTE_STANDARD_IS_SYMLINK to determine
* whether a file is a symlink or not. This is due to the fact that NTFS does
* not have a single filesystem object type for symbolic links - it has
* files that symlink to files, and directories that symlink to directories.
* #GFileType enumeration cannot precisely represent this important distinction,
* which is why all Windows symlinks will continue to be reported as
* %G_FILE_TYPE_REGULAR or %G_FILE_TYPE_DIRECTORY.
**/
typedef enum {
G_FILE_TYPE_UNKNOWN = 0,
G_FILE_TYPE_REGULAR,
G_FILE_TYPE_DIRECTORY,
G_FILE_TYPE_SYMBOLIC_LINK,
G_FILE_TYPE_SPECIAL, /* socket, fifo, blockdev, chardev */
G_FILE_TYPE_SHORTCUT,
G_FILE_TYPE_MOUNTABLE
} GFileType;
/**
* GFilesystemPreviewType:
* @G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS: Only preview files if user has explicitly requested it.
* @G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL: Preview files if user has requested preview of "local" files.
* @G_FILESYSTEM_PREVIEW_TYPE_NEVER: Never preview files.
*
* Indicates a hint from the file system whether files should be
* previewed in a file manager. Returned as the value of the key
* %G_FILE_ATTRIBUTE_FILESYSTEM_USE_PREVIEW.
**/
typedef enum {
G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS = 0,
G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL,
G_FILESYSTEM_PREVIEW_TYPE_NEVER
} GFilesystemPreviewType;
/**
* GFileMonitorEvent:
* @G_FILE_MONITOR_EVENT_CHANGED: a file changed.
* @G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT: a hint that this was probably the last change in a set of changes.
* @G_FILE_MONITOR_EVENT_DELETED: a file was deleted.
* @G_FILE_MONITOR_EVENT_CREATED: a file was created.
* @G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED: a file attribute was changed.
* @G_FILE_MONITOR_EVENT_PRE_UNMOUNT: the file location will soon be unmounted.
* @G_FILE_MONITOR_EVENT_UNMOUNTED: the file location was unmounted.
* @G_FILE_MONITOR_EVENT_MOVED: the file was moved -- only sent if the
* (deprecated) %G_FILE_MONITOR_SEND_MOVED flag is set
* @G_FILE_MONITOR_EVENT_RENAMED: the file was renamed within the
* current directory -- only sent if the %G_FILE_MONITOR_WATCH_MOVES
* flag is set. Since: 2.46.
* @G_FILE_MONITOR_EVENT_MOVED_IN: the file was moved into the
* monitored directory from another location -- only sent if the
* %G_FILE_MONITOR_WATCH_MOVES flag is set. Since: 2.46.
* @G_FILE_MONITOR_EVENT_MOVED_OUT: the file was moved out of the
* monitored directory to another location -- only sent if the
* %G_FILE_MONITOR_WATCH_MOVES flag is set. Since: 2.46
*
* Specifies what type of event a monitor event is.
**/
typedef enum {
G_FILE_MONITOR_EVENT_CHANGED,
G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT,
G_FILE_MONITOR_EVENT_DELETED,
G_FILE_MONITOR_EVENT_CREATED,
G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED,
G_FILE_MONITOR_EVENT_PRE_UNMOUNT,
G_FILE_MONITOR_EVENT_UNMOUNTED,
G_FILE_MONITOR_EVENT_MOVED,
G_FILE_MONITOR_EVENT_RENAMED,
G_FILE_MONITOR_EVENT_MOVED_IN,
G_FILE_MONITOR_EVENT_MOVED_OUT
} GFileMonitorEvent;
/* This enumeration conflicts with GIOError in giochannel.h. However,
* that is only used as a return value in some deprecated functions.
* So, we reuse the same prefix for the enumeration values, but call
* the actual enumeration (which is rarely used) GIOErrorEnum.
*/
/**
* GIOErrorEnum:
* @G_IO_ERROR_FAILED: Generic error condition for when an operation fails
* and no more specific #GIOErrorEnum value is defined.
* @G_IO_ERROR_NOT_FOUND: File not found.
* @G_IO_ERROR_EXISTS: File already exists.
* @G_IO_ERROR_IS_DIRECTORY: File is a directory.
* @G_IO_ERROR_NOT_DIRECTORY: File is not a directory.
* @G_IO_ERROR_NOT_EMPTY: File is a directory that isn't empty.
* @G_IO_ERROR_NOT_REGULAR_FILE: File is not a regular file.
* @G_IO_ERROR_NOT_SYMBOLIC_LINK: File is not a symbolic link.
* @G_IO_ERROR_NOT_MOUNTABLE_FILE: File cannot be mounted.
* @G_IO_ERROR_FILENAME_TOO_LONG: Filename is too many characters.
* @G_IO_ERROR_INVALID_FILENAME: Filename is invalid or contains invalid characters.
* @G_IO_ERROR_TOO_MANY_LINKS: File contains too many symbolic links.
* @G_IO_ERROR_NO_SPACE: No space left on drive.
* @G_IO_ERROR_INVALID_ARGUMENT: Invalid argument.
* @G_IO_ERROR_PERMISSION_DENIED: Permission denied.
* @G_IO_ERROR_NOT_SUPPORTED: Operation (or one of its parameters) not supported
* @G_IO_ERROR_NOT_MOUNTED: File isn't mounted.
* @G_IO_ERROR_ALREADY_MOUNTED: File is already mounted.
* @G_IO_ERROR_CLOSED: File was closed.
* @G_IO_ERROR_CANCELLED: Operation was cancelled. See #GCancellable.
* @G_IO_ERROR_PENDING: Operations are still pending.
* @G_IO_ERROR_READ_ONLY: File is read only.
* @G_IO_ERROR_CANT_CREATE_BACKUP: Backup couldn't be created.
* @G_IO_ERROR_WRONG_ETAG: File's Entity Tag was incorrect.
* @G_IO_ERROR_TIMED_OUT: Operation timed out.
* @G_IO_ERROR_WOULD_RECURSE: Operation would be recursive.
* @G_IO_ERROR_BUSY: File is busy.
* @G_IO_ERROR_WOULD_BLOCK: Operation would block.
* @G_IO_ERROR_HOST_NOT_FOUND: Host couldn't be found (remote operations).
* @G_IO_ERROR_WOULD_MERGE: Operation would merge files.
* @G_IO_ERROR_FAILED_HANDLED: Operation failed and a helper program has
* already interacted with the user. Do not display any error dialog.
* @G_IO_ERROR_TOO_MANY_OPEN_FILES: The current process has too many files
* open and can't open any more. Duplicate descriptors do count toward
* this limit. Since 2.20
* @G_IO_ERROR_NOT_INITIALIZED: The object has not been initialized. Since 2.22
* @G_IO_ERROR_ADDRESS_IN_USE: The requested address is already in use. Since 2.22
* @G_IO_ERROR_PARTIAL_INPUT: Need more input to finish operation. Since 2.24
* @G_IO_ERROR_INVALID_DATA: The input data was invalid. Since 2.24
* @G_IO_ERROR_DBUS_ERROR: A remote object generated an error that
* doesn't correspond to a locally registered #GError error
* domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
* error name and g_dbus_error_strip_remote_error() to fix up the
* message so it matches what was received on the wire. Since 2.26.
* @G_IO_ERROR_HOST_UNREACHABLE: Host unreachable. Since 2.26
* @G_IO_ERROR_NETWORK_UNREACHABLE: Network unreachable. Since 2.26
* @G_IO_ERROR_CONNECTION_REFUSED: Connection refused. Since 2.26
* @G_IO_ERROR_PROXY_FAILED: Connection to proxy server failed. Since 2.26
* @G_IO_ERROR_PROXY_AUTH_FAILED: Proxy authentication failed. Since 2.26
* @G_IO_ERROR_PROXY_NEED_AUTH: Proxy server needs authentication. Since 2.26
* @G_IO_ERROR_PROXY_NOT_ALLOWED: Proxy connection is not allowed by ruleset.
* Since 2.26
* @G_IO_ERROR_BROKEN_PIPE: Broken pipe. Since 2.36
* @G_IO_ERROR_CONNECTION_CLOSED: Connection closed by peer. Note that this
* is the same code as %G_IO_ERROR_BROKEN_PIPE; before 2.44 some
* "connection closed" errors returned %G_IO_ERROR_BROKEN_PIPE, but others
* returned %G_IO_ERROR_FAILED. Now they should all return the same
* value, which has this more logical name. Since 2.44.
* @G_IO_ERROR_NOT_CONNECTED: Transport endpoint is not connected. Since 2.44
* @G_IO_ERROR_MESSAGE_TOO_LARGE: Message too large. Since 2.48.
* @G_IO_ERROR_NO_SUCH_DEVICE: No such device found. Since 2.74
*
* Error codes returned by GIO functions.
*
* Note that this domain may be extended in future GLib releases. In
* general, new error codes either only apply to new APIs, or else
* replace %G_IO_ERROR_FAILED in cases that were not explicitly
* distinguished before. You should therefore avoid writing code like
* |[<!-- language="C" -->
* if (g_error_matches (error, G_IO_ERROR, G_IO_ERROR_FAILED))
* {
* // Assume that this is EPRINTERONFIRE
* ...
* }
* ]|
* but should instead treat all unrecognized error codes the same as
* %G_IO_ERROR_FAILED.
*
* See also #GPollableReturn for a cheaper way of returning
* %G_IO_ERROR_WOULD_BLOCK to callers without allocating a #GError.
**/
typedef enum {
G_IO_ERROR_FAILED,
G_IO_ERROR_NOT_FOUND,
G_IO_ERROR_EXISTS,
G_IO_ERROR_IS_DIRECTORY,
G_IO_ERROR_NOT_DIRECTORY,
G_IO_ERROR_NOT_EMPTY,
G_IO_ERROR_NOT_REGULAR_FILE,
G_IO_ERROR_NOT_SYMBOLIC_LINK,
G_IO_ERROR_NOT_MOUNTABLE_FILE,
G_IO_ERROR_FILENAME_TOO_LONG,
G_IO_ERROR_INVALID_FILENAME,
G_IO_ERROR_TOO_MANY_LINKS,
G_IO_ERROR_NO_SPACE,
G_IO_ERROR_INVALID_ARGUMENT,
G_IO_ERROR_PERMISSION_DENIED,
G_IO_ERROR_NOT_SUPPORTED,
G_IO_ERROR_NOT_MOUNTED,
G_IO_ERROR_ALREADY_MOUNTED,
G_IO_ERROR_CLOSED,
G_IO_ERROR_CANCELLED,
G_IO_ERROR_PENDING,
G_IO_ERROR_READ_ONLY,
G_IO_ERROR_CANT_CREATE_BACKUP,
G_IO_ERROR_WRONG_ETAG,
G_IO_ERROR_TIMED_OUT,
G_IO_ERROR_WOULD_RECURSE,
G_IO_ERROR_BUSY,
G_IO_ERROR_WOULD_BLOCK,
G_IO_ERROR_HOST_NOT_FOUND,
G_IO_ERROR_WOULD_MERGE,
G_IO_ERROR_FAILED_HANDLED,
G_IO_ERROR_TOO_MANY_OPEN_FILES,
G_IO_ERROR_NOT_INITIALIZED,
G_IO_ERROR_ADDRESS_IN_USE,
G_IO_ERROR_PARTIAL_INPUT,
G_IO_ERROR_INVALID_DATA,
G_IO_ERROR_DBUS_ERROR,
G_IO_ERROR_HOST_UNREACHABLE,
G_IO_ERROR_NETWORK_UNREACHABLE,
G_IO_ERROR_CONNECTION_REFUSED,
G_IO_ERROR_PROXY_FAILED,
G_IO_ERROR_PROXY_AUTH_FAILED,
G_IO_ERROR_PROXY_NEED_AUTH,
G_IO_ERROR_PROXY_NOT_ALLOWED,
G_IO_ERROR_BROKEN_PIPE,
G_IO_ERROR_CONNECTION_CLOSED = G_IO_ERROR_BROKEN_PIPE,
G_IO_ERROR_NOT_CONNECTED,
G_IO_ERROR_MESSAGE_TOO_LARGE,
G_IO_ERROR_NO_SUCH_DEVICE GLIB_AVAILABLE_ENUMERATOR_IN_2_74,
} GIOErrorEnum;
/**
* GAskPasswordFlags:
* @G_ASK_PASSWORD_NEED_PASSWORD: operation requires a password.
* @G_ASK_PASSWORD_NEED_USERNAME: operation requires a username.
* @G_ASK_PASSWORD_NEED_DOMAIN: operation requires a domain.
* @G_ASK_PASSWORD_SAVING_SUPPORTED: operation supports saving settings.
* @G_ASK_PASSWORD_ANONYMOUS_SUPPORTED: operation supports anonymous users.
* @G_ASK_PASSWORD_TCRYPT: operation takes TCRYPT parameters (Since: 2.58)
*
* #GAskPasswordFlags are used to request specific information from the
* user, or to notify the user of their choices in an authentication
* situation.
**/
typedef enum {
G_ASK_PASSWORD_NEED_PASSWORD = (1 << 0),
G_ASK_PASSWORD_NEED_USERNAME = (1 << 1),
G_ASK_PASSWORD_NEED_DOMAIN = (1 << 2),
G_ASK_PASSWORD_SAVING_SUPPORTED = (1 << 3),
G_ASK_PASSWORD_ANONYMOUS_SUPPORTED = (1 << 4),
G_ASK_PASSWORD_TCRYPT = (1 << 5),
} GAskPasswordFlags;
/**
* GPasswordSave:
* @G_PASSWORD_SAVE_NEVER: never save a password.
* @G_PASSWORD_SAVE_FOR_SESSION: save a password for the session.
* @G_PASSWORD_SAVE_PERMANENTLY: save a password permanently.
*
* #GPasswordSave is used to indicate the lifespan of a saved password.
*
* #Gvfs stores passwords in the Gnome keyring when this flag allows it
* to, and later retrieves it again from there.
**/
typedef enum {
G_PASSWORD_SAVE_NEVER,
G_PASSWORD_SAVE_FOR_SESSION,
G_PASSWORD_SAVE_PERMANENTLY
} GPasswordSave;
/**
* GMountOperationResult:
* @G_MOUNT_OPERATION_HANDLED: The request was fulfilled and the
* user specified data is now available
* @G_MOUNT_OPERATION_ABORTED: The user requested the mount operation
* to be aborted
* @G_MOUNT_OPERATION_UNHANDLED: The request was unhandled (i.e. not
* implemented)
*
* #GMountOperationResult is returned as a result when a request for
* information is send by the mounting operation.
**/
typedef enum {
G_MOUNT_OPERATION_HANDLED,
G_MOUNT_OPERATION_ABORTED,
G_MOUNT_OPERATION_UNHANDLED
} GMountOperationResult;
/**
* GOutputStreamSpliceFlags:
* @G_OUTPUT_STREAM_SPLICE_NONE: Do not close either stream.
* @G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE: Close the source stream after
* the splice.
* @G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET: Close the target stream after
* the splice.
*
* GOutputStreamSpliceFlags determine how streams should be spliced.
**/
typedef enum {
G_OUTPUT_STREAM_SPLICE_NONE = 0,
G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE = (1 << 0),
G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET = (1 << 1)
} GOutputStreamSpliceFlags;
/**
* GIOStreamSpliceFlags:
* @G_IO_STREAM_SPLICE_NONE: Do not close either stream.
* @G_IO_STREAM_SPLICE_CLOSE_STREAM1: Close the first stream after
* the splice.
* @G_IO_STREAM_SPLICE_CLOSE_STREAM2: Close the second stream after
* the splice.
* @G_IO_STREAM_SPLICE_WAIT_FOR_BOTH: Wait for both splice operations to finish
* before calling the callback.
*
* GIOStreamSpliceFlags determine how streams should be spliced.
*
* Since: 2.28
**/
typedef enum {
G_IO_STREAM_SPLICE_NONE = 0,
G_IO_STREAM_SPLICE_CLOSE_STREAM1 = (1 << 0),
G_IO_STREAM_SPLICE_CLOSE_STREAM2 = (1 << 1),
G_IO_STREAM_SPLICE_WAIT_FOR_BOTH = (1 << 2)
} GIOStreamSpliceFlags;
/**
* GEmblemOrigin:
* @G_EMBLEM_ORIGIN_UNKNOWN: Emblem of unknown origin
* @G_EMBLEM_ORIGIN_DEVICE: Emblem adds device-specific information
* @G_EMBLEM_ORIGIN_LIVEMETADATA: Emblem depicts live metadata, such as "readonly"
* @G_EMBLEM_ORIGIN_TAG: Emblem comes from a user-defined tag, e.g. set by nautilus (in the future)
*
* GEmblemOrigin is used to add information about the origin of the emblem
* to #GEmblem.
*
* Since: 2.18
*/
typedef enum {
G_EMBLEM_ORIGIN_UNKNOWN,
G_EMBLEM_ORIGIN_DEVICE,
G_EMBLEM_ORIGIN_LIVEMETADATA,
G_EMBLEM_ORIGIN_TAG
} GEmblemOrigin;
/**
* GResolverError:
* @G_RESOLVER_ERROR_NOT_FOUND: the requested name/address/service was not
* found
* @G_RESOLVER_ERROR_TEMPORARY_FAILURE: the requested information could not
* be looked up due to a network error or similar problem
* @G_RESOLVER_ERROR_INTERNAL: unknown error
*
* An error code used with %G_RESOLVER_ERROR in a #GError returned
* from a #GResolver routine.
*
* Since: 2.22
*/
typedef enum {
G_RESOLVER_ERROR_NOT_FOUND,
G_RESOLVER_ERROR_TEMPORARY_FAILURE,
G_RESOLVER_ERROR_INTERNAL
} GResolverError;
/**
* GResolverRecordType:
* @G_RESOLVER_RECORD_SRV: look up DNS SRV records for a domain
* @G_RESOLVER_RECORD_MX: look up DNS MX records for a domain
* @G_RESOLVER_RECORD_TXT: look up DNS TXT records for a name
* @G_RESOLVER_RECORD_SOA: look up DNS SOA records for a zone
* @G_RESOLVER_RECORD_NS: look up DNS NS records for a domain
*
* The type of record that g_resolver_lookup_records() or
* g_resolver_lookup_records_async() should retrieve. The records are returned
* as lists of #GVariant tuples. Each record type has different values in
* the variant tuples returned.
*
* %G_RESOLVER_RECORD_SRV records are returned as variants with the signature
* `(qqqs)`, containing a `guint16` with the priority, a `guint16` with the
* weight, a `guint16` with the port, and a string of the hostname.
*
* %G_RESOLVER_RECORD_MX records are returned as variants with the signature
* `(qs)`, representing a `guint16` with the preference, and a string containing
* the mail exchanger hostname.
*
* %G_RESOLVER_RECORD_TXT records are returned as variants with the signature
* `(as)`, representing an array of the strings in the text record. Note: Most TXT
* records only contain a single string, but
* [RFC 1035](https://tools.ietf.org/html/rfc1035#section-3.3.14) does allow a
* record to contain multiple strings. The RFC which defines the interpretation
* of a specific TXT record will likely require concatenation of multiple
* strings if they are present, as with
* [RFC 7208](https://tools.ietf.org/html/rfc7208#section-3.3).
*
* %G_RESOLVER_RECORD_SOA records are returned as variants with the signature
* `(ssuuuuu)`, representing a string containing the primary name server, a
* string containing the administrator, the serial as a `guint32`, the refresh
* interval as a `guint32`, the retry interval as a `guint32`, the expire timeout
* as a `guint32`, and the TTL as a `guint32`.
*
* %G_RESOLVER_RECORD_NS records are returned as variants with the signature
* `(s)`, representing a string of the hostname of the name server.
*
* Since: 2.34
*/
typedef enum {
G_RESOLVER_RECORD_SRV = 1,
G_RESOLVER_RECORD_MX,
G_RESOLVER_RECORD_TXT,
G_RESOLVER_RECORD_SOA,
G_RESOLVER_RECORD_NS
} GResolverRecordType;
/**
* GResourceError:
* @G_RESOURCE_ERROR_NOT_FOUND: no file was found at the requested path
* @G_RESOURCE_ERROR_INTERNAL: unknown error
*
* An error code used with %G_RESOURCE_ERROR in a #GError returned
* from a #GResource routine.
*
* Since: 2.32
*/
typedef enum {
G_RESOURCE_ERROR_NOT_FOUND,
G_RESOURCE_ERROR_INTERNAL
} GResourceError;
/**
* GResourceFlags:
* @G_RESOURCE_FLAGS_NONE: No flags set.
* @G_RESOURCE_FLAGS_COMPRESSED: The file is compressed.
*
* GResourceFlags give information about a particular file inside a resource
* bundle.
*
* Since: 2.32
**/
typedef enum {
G_RESOURCE_FLAGS_NONE = 0,
G_RESOURCE_FLAGS_COMPRESSED = (1<<0)
} GResourceFlags;
/**
* GResourceLookupFlags:
* @G_RESOURCE_LOOKUP_FLAGS_NONE: No flags set.
*
* GResourceLookupFlags determine how resource path lookups are handled.
*
* Since: 2.32
**/
typedef enum /*< flags >*/ {
G_RESOURCE_LOOKUP_FLAGS_NONE = 0
} GResourceLookupFlags;
/**
* GSocketFamily:
* @G_SOCKET_FAMILY_INVALID: no address family
* @G_SOCKET_FAMILY_IPV4: the IPv4 family
* @G_SOCKET_FAMILY_IPV6: the IPv6 family
* @G_SOCKET_FAMILY_UNIX: the UNIX domain family
*
* The protocol family of a #GSocketAddress. (These values are
* identical to the system defines %AF_INET, %AF_INET6 and %AF_UNIX,
* if available.)
*
* Since: 2.22
*/
typedef enum {
G_SOCKET_FAMILY_INVALID,
G_SOCKET_FAMILY_UNIX = GLIB_SYSDEF_AF_UNIX,
G_SOCKET_FAMILY_IPV4 = GLIB_SYSDEF_AF_INET,
G_SOCKET_FAMILY_IPV6 = GLIB_SYSDEF_AF_INET6
} GSocketFamily;
/**
* GSocketType:
* @G_SOCKET_TYPE_INVALID: Type unknown or wrong
* @G_SOCKET_TYPE_STREAM: Reliable connection-based byte streams (e.g. TCP).
* @G_SOCKET_TYPE_DATAGRAM: Connectionless, unreliable datagram passing.
* (e.g. UDP)
* @G_SOCKET_TYPE_SEQPACKET: Reliable connection-based passing of datagrams
* of fixed maximum length (e.g. SCTP).
*
* Flags used when creating a #GSocket. Some protocols may not implement
* all the socket types.
*
* Since: 2.22
*/
typedef enum
{
G_SOCKET_TYPE_INVALID,
G_SOCKET_TYPE_STREAM,
G_SOCKET_TYPE_DATAGRAM,
G_SOCKET_TYPE_SEQPACKET
} GSocketType;
/**
* GSocketMsgFlags:
* @G_SOCKET_MSG_NONE: No flags.
* @G_SOCKET_MSG_OOB: Request to send/receive out of band data.
* @G_SOCKET_MSG_PEEK: Read data from the socket without removing it from
* the queue.
* @G_SOCKET_MSG_DONTROUTE: Don't use a gateway to send out the packet,
* only send to hosts on directly connected networks.
*
* Flags used in g_socket_receive_message() and g_socket_send_message().
* The flags listed in the enum are some commonly available flags, but the
* values used for them are the same as on the platform, and any other flags
* are passed in/out as is. So to use a platform specific flag, just include
* the right system header and pass in the flag.
*
* Since: 2.22
*/
typedef enum /*< flags >*/
{
G_SOCKET_MSG_NONE,
G_SOCKET_MSG_OOB = GLIB_SYSDEF_MSG_OOB,
G_SOCKET_MSG_PEEK = GLIB_SYSDEF_MSG_PEEK,
G_SOCKET_MSG_DONTROUTE = GLIB_SYSDEF_MSG_DONTROUTE
} GSocketMsgFlags;
/**
* GSocketProtocol:
* @G_SOCKET_PROTOCOL_UNKNOWN: The protocol type is unknown
* @G_SOCKET_PROTOCOL_DEFAULT: The default protocol for the family/type
* @G_SOCKET_PROTOCOL_TCP: TCP over IP
* @G_SOCKET_PROTOCOL_UDP: UDP over IP
* @G_SOCKET_PROTOCOL_SCTP: SCTP over IP
*
* A protocol identifier is specified when creating a #GSocket, which is a
* family/type specific identifier, where 0 means the default protocol for
* the particular family/type.
*
* This enum contains a set of commonly available and used protocols. You
* can also pass any other identifiers handled by the platform in order to
* use protocols not listed here.
*
* Since: 2.22
*/
typedef enum {
G_SOCKET_PROTOCOL_UNKNOWN = -1,
G_SOCKET_PROTOCOL_DEFAULT = 0,
G_SOCKET_PROTOCOL_TCP = 6,
G_SOCKET_PROTOCOL_UDP = 17,
G_SOCKET_PROTOCOL_SCTP = 132
} GSocketProtocol;
/**
* GZlibCompressorFormat:
* @G_ZLIB_COMPRESSOR_FORMAT_ZLIB: deflate compression with zlib header
* @G_ZLIB_COMPRESSOR_FORMAT_GZIP: gzip file format
* @G_ZLIB_COMPRESSOR_FORMAT_RAW: deflate compression with no header
*
* Used to select the type of data format to use for #GZlibDecompressor
* and #GZlibCompressor.
*
* Since: 2.24
*/
typedef enum {
G_ZLIB_COMPRESSOR_FORMAT_ZLIB,
G_ZLIB_COMPRESSOR_FORMAT_GZIP,
G_ZLIB_COMPRESSOR_FORMAT_RAW
} GZlibCompressorFormat;
/**
* GUnixSocketAddressType:
* @G_UNIX_SOCKET_ADDRESS_INVALID: invalid
* @G_UNIX_SOCKET_ADDRESS_ANONYMOUS: anonymous
* @G_UNIX_SOCKET_ADDRESS_PATH: a filesystem path
* @G_UNIX_SOCKET_ADDRESS_ABSTRACT: an abstract name
* @G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED: an abstract name, 0-padded
* to the full length of a unix socket name
*
* The type of name used by a #GUnixSocketAddress.
* %G_UNIX_SOCKET_ADDRESS_PATH indicates a traditional unix domain
* socket bound to a filesystem path. %G_UNIX_SOCKET_ADDRESS_ANONYMOUS
* indicates a socket not bound to any name (eg, a client-side socket,
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
* them; the man pages suggest using the entire `struct sockaddr_un`
* as the name, padding the unused parts of the %sun_path field with
* zeroes; this corresponds to %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED.
* However, many programs instead just use a portion of %sun_path, and
* pass an appropriate smaller length to bind() or connect(). This is
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT.
*
* Since: 2.26
*/
typedef enum {
G_UNIX_SOCKET_ADDRESS_INVALID,
G_UNIX_SOCKET_ADDRESS_ANONYMOUS,
G_UNIX_SOCKET_ADDRESS_PATH,
G_UNIX_SOCKET_ADDRESS_ABSTRACT,
G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED
} GUnixSocketAddressType;
/**
* GBusType:
* @G_BUS_TYPE_STARTER: An alias for the message bus that activated the process, if any.
* @G_BUS_TYPE_NONE: Not a message bus.
* @G_BUS_TYPE_SYSTEM: The system-wide message bus.
* @G_BUS_TYPE_SESSION: The login session message bus.
*
* An enumeration for well-known message buses.
*
* Since: 2.26
*/
typedef enum
{
G_BUS_TYPE_STARTER = -1,
G_BUS_TYPE_NONE = 0,
G_BUS_TYPE_SYSTEM = 1,
G_BUS_TYPE_SESSION = 2
} GBusType;
/**
* GBusNameOwnerFlags:
* @G_BUS_NAME_OWNER_FLAGS_NONE: No flags set.
* @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the name.
* @G_BUS_NAME_OWNER_FLAGS_REPLACE: If another message bus connection owns the name and have
* specified %G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
* @G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE: If another message bus connection owns the name, immediately
* return an error from g_bus_own_name() rather than entering the waiting queue for that name. (Since 2.54)
*
* Flags used in g_bus_own_name().
*
* Since: 2.26
*/
typedef enum
{
G_BUS_NAME_OWNER_FLAGS_NONE = 0, /*< nick=none >*/
G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT = (1<<0), /*< nick=allow-replacement >*/
G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1), /*< nick=replace >*/
G_BUS_NAME_OWNER_FLAGS_DO_NOT_QUEUE = (1<<2) /*< nick=do-not-queue >*/
} GBusNameOwnerFlags;
/* When adding new flags, their numeric values must currently match those
* used in the D-Bus Specification. */
/**
* GBusNameWatcherFlags:
* @G_BUS_NAME_WATCHER_FLAGS_NONE: No flags set.
* @G_BUS_NAME_WATCHER_FLAGS_AUTO_START: If no-one owns the name when
* beginning to watch the name, ask the bus to launch an owner for the
* name.
*
* Flags used in g_bus_watch_name().
*
* Since: 2.26
*/
typedef enum
{
G_BUS_NAME_WATCHER_FLAGS_NONE = 0,
G_BUS_NAME_WATCHER_FLAGS_AUTO_START = (1<<0)
} GBusNameWatcherFlags;
/**
* GDBusProxyFlags:
* @G_DBUS_PROXY_FLAGS_NONE: No flags set.
* @G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES: Don't load properties.
* @G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS: Don't connect to signals on the remote object.
* @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START: If the proxy is for a well-known name,
* do not ask the bus to launch an owner during proxy initialization or a method call.
* This flag is only meaningful in proxies for well-known names.
* @G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES: If set, the property value for any __invalidated property__ will be (asynchronously) retrieved upon receiving the [`PropertiesChanged`](http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties) D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
* @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION: If the proxy is for a well-known name,
* do not ask the bus to launch an owner during proxy initialization, but allow it to be
* autostarted by a method call. This flag is only meaningful in proxies for well-known names,
* and only if %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START is not also specified.
* @G_DBUS_PROXY_FLAGS_NO_MATCH_RULE: Don't actually send the AddMatch D-Bus
* call for this signal subscription. This gives you more control
* over which match rules you add (but you must add them manually). (Since: 2.72)
*
* Flags used when constructing an instance of a #GDBusProxy derived class.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_PROXY_FLAGS_NONE = 0,
G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0),
G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1),
G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2),
G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES = (1<<3),
G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION = (1<<4),
G_DBUS_PROXY_FLAGS_NO_MATCH_RULE GLIB_AVAILABLE_ENUMERATOR_IN_2_72 = (1<<5)
} GDBusProxyFlags;
/**
* GDBusError:
* @G_DBUS_ERROR_FAILED:
* A generic error; "something went wrong" - see the error message for
* more.
* @G_DBUS_ERROR_NO_MEMORY:
* There was not enough memory to complete an operation.
* @G_DBUS_ERROR_SERVICE_UNKNOWN:
* The bus doesn't know how to launch a service to supply the bus name
* you wanted.
* @G_DBUS_ERROR_NAME_HAS_NO_OWNER:
* The bus name you referenced doesn't exist (i.e. no application owns
* it).
* @G_DBUS_ERROR_NO_REPLY:
* No reply to a message expecting one, usually means a timeout occurred.
* @G_DBUS_ERROR_IO_ERROR:
* Something went wrong reading or writing to a socket, for example.
* @G_DBUS_ERROR_BAD_ADDRESS:
* A D-Bus bus address was malformed.
* @G_DBUS_ERROR_NOT_SUPPORTED:
* Requested operation isn't supported (like ENOSYS on UNIX).
* @G_DBUS_ERROR_LIMITS_EXCEEDED:
* Some limited resource is exhausted.
* @G_DBUS_ERROR_ACCESS_DENIED:
* Security restrictions don't allow doing what you're trying to do.
* @G_DBUS_ERROR_AUTH_FAILED:
* Authentication didn't work.
* @G_DBUS_ERROR_NO_SERVER:
* Unable to connect to server (probably caused by ECONNREFUSED on a
* socket).
* @G_DBUS_ERROR_TIMEOUT:
* Certain timeout errors, possibly ETIMEDOUT on a socket. Note that
* %G_DBUS_ERROR_NO_REPLY is used for message reply timeouts. Warning:
* this is confusingly-named given that %G_DBUS_ERROR_TIMED_OUT also
* exists. We can't fix it for compatibility reasons so just be
* careful.
* @G_DBUS_ERROR_NO_NETWORK:
* No network access (probably ENETUNREACH on a socket).
* @G_DBUS_ERROR_ADDRESS_IN_USE:
* Can't bind a socket since its address is in use (i.e. EADDRINUSE).
* @G_DBUS_ERROR_DISCONNECTED:
* The connection is disconnected and you're trying to use it.
* @G_DBUS_ERROR_INVALID_ARGS:
* Invalid arguments passed to a method call.
* @G_DBUS_ERROR_FILE_NOT_FOUND:
* Missing file.
* @G_DBUS_ERROR_FILE_EXISTS:
* Existing file and the operation you're using does not silently overwrite.
* @G_DBUS_ERROR_UNKNOWN_METHOD:
* Method name you invoked isn't known by the object you invoked it on.
* @G_DBUS_ERROR_UNKNOWN_OBJECT:
* Object you invoked a method on isn't known. Since 2.42
* @G_DBUS_ERROR_UNKNOWN_INTERFACE:
* Interface you invoked a method on isn't known by the object. Since 2.42
* @G_DBUS_ERROR_UNKNOWN_PROPERTY:
* Property you tried to access isn't known by the object. Since 2.42
* @G_DBUS_ERROR_PROPERTY_READ_ONLY:
* Property you tried to set is read-only. Since 2.42
* @G_DBUS_ERROR_TIMED_OUT:
* Certain timeout errors, e.g. while starting a service. Warning: this is
* confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We
* can't fix it for compatibility reasons so just be careful.
* @G_DBUS_ERROR_MATCH_RULE_NOT_FOUND:
* Tried to remove or modify a match rule that didn't exist.
* @G_DBUS_ERROR_MATCH_RULE_INVALID:
* The match rule isn't syntactically valid.
* @G_DBUS_ERROR_SPAWN_EXEC_FAILED:
* While starting a new process, the exec() call failed.
* @G_DBUS_ERROR_SPAWN_FORK_FAILED:
* While starting a new process, the fork() call failed.
* @G_DBUS_ERROR_SPAWN_CHILD_EXITED:
* While starting a new process, the child exited with a status code.
* @G_DBUS_ERROR_SPAWN_CHILD_SIGNALED:
* While starting a new process, the child exited on a signal.
* @G_DBUS_ERROR_SPAWN_FAILED:
* While starting a new process, something went wrong.
* @G_DBUS_ERROR_SPAWN_SETUP_FAILED:
* We failed to setup the environment correctly.
* @G_DBUS_ERROR_SPAWN_CONFIG_INVALID:
* We failed to setup the config parser correctly.
* @G_DBUS_ERROR_SPAWN_SERVICE_INVALID:
* Bus name was not valid.
* @G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND:
* Service file not found in system-services directory.
* @G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID:
* Permissions are incorrect on the setuid helper.
* @G_DBUS_ERROR_SPAWN_FILE_INVALID:
* Service file invalid (Name, User or Exec missing).
* @G_DBUS_ERROR_SPAWN_NO_MEMORY:
* Tried to get a UNIX process ID and it wasn't available.
* @G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN:
* Tried to get a UNIX process ID and it wasn't available.
* @G_DBUS_ERROR_INVALID_SIGNATURE:
* A type signature is not valid.
* @G_DBUS_ERROR_INVALID_FILE_CONTENT:
* A file contains invalid syntax or is otherwise broken.
* @G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN:
* Asked for SELinux security context and it wasn't available.
* @G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN:
* Asked for ADT audit data and it wasn't available.
* @G_DBUS_ERROR_OBJECT_PATH_IN_USE:
* There's already an object with the requested object path.
*
* Error codes for the %G_DBUS_ERROR error domain.
*
* Since: 2.26
*/
typedef enum
{
/* Well-known errors in the org.freedesktop.DBus.Error namespace */
G_DBUS_ERROR_FAILED, /* org.freedesktop.DBus.Error.Failed */
G_DBUS_ERROR_NO_MEMORY, /* org.freedesktop.DBus.Error.NoMemory */
G_DBUS_ERROR_SERVICE_UNKNOWN, /* org.freedesktop.DBus.Error.ServiceUnknown */
G_DBUS_ERROR_NAME_HAS_NO_OWNER, /* org.freedesktop.DBus.Error.NameHasNoOwner */
G_DBUS_ERROR_NO_REPLY, /* org.freedesktop.DBus.Error.NoReply */
G_DBUS_ERROR_IO_ERROR, /* org.freedesktop.DBus.Error.IOError */
G_DBUS_ERROR_BAD_ADDRESS, /* org.freedesktop.DBus.Error.BadAddress */
G_DBUS_ERROR_NOT_SUPPORTED, /* org.freedesktop.DBus.Error.NotSupported */
G_DBUS_ERROR_LIMITS_EXCEEDED, /* org.freedesktop.DBus.Error.LimitsExceeded */
G_DBUS_ERROR_ACCESS_DENIED, /* org.freedesktop.DBus.Error.AccessDenied */
G_DBUS_ERROR_AUTH_FAILED, /* org.freedesktop.DBus.Error.AuthFailed */
G_DBUS_ERROR_NO_SERVER, /* org.freedesktop.DBus.Error.NoServer */
G_DBUS_ERROR_TIMEOUT, /* org.freedesktop.DBus.Error.Timeout */
G_DBUS_ERROR_NO_NETWORK, /* org.freedesktop.DBus.Error.NoNetwork */
G_DBUS_ERROR_ADDRESS_IN_USE, /* org.freedesktop.DBus.Error.AddressInUse */
G_DBUS_ERROR_DISCONNECTED, /* org.freedesktop.DBus.Error.Disconnected */
G_DBUS_ERROR_INVALID_ARGS, /* org.freedesktop.DBus.Error.InvalidArgs */
G_DBUS_ERROR_FILE_NOT_FOUND, /* org.freedesktop.DBus.Error.FileNotFound */
G_DBUS_ERROR_FILE_EXISTS, /* org.freedesktop.DBus.Error.FileExists */
G_DBUS_ERROR_UNKNOWN_METHOD, /* org.freedesktop.DBus.Error.UnknownMethod */
G_DBUS_ERROR_TIMED_OUT, /* org.freedesktop.DBus.Error.TimedOut */
G_DBUS_ERROR_MATCH_RULE_NOT_FOUND, /* org.freedesktop.DBus.Error.MatchRuleNotFound */
G_DBUS_ERROR_MATCH_RULE_INVALID, /* org.freedesktop.DBus.Error.MatchRuleInvalid */
G_DBUS_ERROR_SPAWN_EXEC_FAILED, /* org.freedesktop.DBus.Error.Spawn.ExecFailed */
G_DBUS_ERROR_SPAWN_FORK_FAILED, /* org.freedesktop.DBus.Error.Spawn.ForkFailed */
G_DBUS_ERROR_SPAWN_CHILD_EXITED, /* org.freedesktop.DBus.Error.Spawn.ChildExited */
G_DBUS_ERROR_SPAWN_CHILD_SIGNALED, /* org.freedesktop.DBus.Error.Spawn.ChildSignaled */
G_DBUS_ERROR_SPAWN_FAILED, /* org.freedesktop.DBus.Error.Spawn.Failed */
G_DBUS_ERROR_SPAWN_SETUP_FAILED, /* org.freedesktop.DBus.Error.Spawn.FailedToSetup */
G_DBUS_ERROR_SPAWN_CONFIG_INVALID, /* org.freedesktop.DBus.Error.Spawn.ConfigInvalid */
G_DBUS_ERROR_SPAWN_SERVICE_INVALID, /* org.freedesktop.DBus.Error.Spawn.ServiceNotValid */
G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND, /* org.freedesktop.DBus.Error.Spawn.ServiceNotFound */
G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID, /* org.freedesktop.DBus.Error.Spawn.PermissionsInvalid */
G_DBUS_ERROR_SPAWN_FILE_INVALID, /* org.freedesktop.DBus.Error.Spawn.FileInvalid */
G_DBUS_ERROR_SPAWN_NO_MEMORY, /* org.freedesktop.DBus.Error.Spawn.NoMemory */
G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN, /* org.freedesktop.DBus.Error.UnixProcessIdUnknown */
G_DBUS_ERROR_INVALID_SIGNATURE, /* org.freedesktop.DBus.Error.InvalidSignature */
G_DBUS_ERROR_INVALID_FILE_CONTENT, /* org.freedesktop.DBus.Error.InvalidFileContent */
G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN, /* org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown */
G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN, /* org.freedesktop.DBus.Error.AdtAuditDataUnknown */
G_DBUS_ERROR_OBJECT_PATH_IN_USE, /* org.freedesktop.DBus.Error.ObjectPathInUse */
G_DBUS_ERROR_UNKNOWN_OBJECT, /* org.freedesktop.DBus.Error.UnknownObject */
G_DBUS_ERROR_UNKNOWN_INTERFACE, /* org.freedesktop.DBus.Error.UnknownInterface */
G_DBUS_ERROR_UNKNOWN_PROPERTY, /* org.freedesktop.DBus.Error.UnknownProperty */
G_DBUS_ERROR_PROPERTY_READ_ONLY /* org.freedesktop.DBus.Error.PropertyReadOnly */
} GDBusError;
/* Remember to update g_dbus_error_quark() in gdbuserror.c if you extend this enumeration */
/**
* GDBusConnectionFlags:
* @G_DBUS_CONNECTION_FLAGS_NONE: No flags set.
* @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT: Perform authentication against server.
* @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER: Perform authentication against client.
* @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: When
* authenticating as a server, allow the anonymous authentication
* method.
* @G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION: Pass this flag if connecting to a peer that is a
* message bus. This means that the Hello() method will be invoked as part of the connection setup.
* @G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING: If set, processing of D-Bus messages is
* delayed until g_dbus_connection_start_message_processing() is called.
* @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_REQUIRE_SAME_USER: When authenticating
* as a server, require the UID of the peer to be the same as the UID of the server. (Since: 2.68)
* @G_DBUS_CONNECTION_FLAGS_CROSS_NAMESPACE: When authenticating, try to use
* protocols that work across a Linux user namespace boundary, even if this
* reduces interoperability with older D-Bus implementations. This currently
* affects client-side `EXTERNAL` authentication, for which this flag makes
* connections to a server in another user namespace succeed, but causes
* a deadlock when connecting to a GDBus server older than 2.73.3. Since: 2.74
*
* Flags used when creating a new #GDBusConnection.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_CONNECTION_FLAGS_NONE = 0,
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT = (1<<0),
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER = (1<<1),
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<2),
G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION = (1<<3),
G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING = (1<<4),
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_REQUIRE_SAME_USER GLIB_AVAILABLE_ENUMERATOR_IN_2_68 = (1<<5),
G_DBUS_CONNECTION_FLAGS_CROSS_NAMESPACE GLIB_AVAILABLE_ENUMERATOR_IN_2_74 = (1<<6)
} GDBusConnectionFlags;
/**
* GDBusCapabilityFlags:
* @G_DBUS_CAPABILITY_FLAGS_NONE: No flags set.
* @G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING: The connection
* supports exchanging UNIX file descriptors with the remote peer.
*
* Capabilities negotiated with the remote peer.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_CAPABILITY_FLAGS_NONE = 0,
G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING = (1<<0)
} GDBusCapabilityFlags;
/**
* GDBusCallFlags:
* @G_DBUS_CALL_FLAGS_NONE: No flags set.
* @G_DBUS_CALL_FLAGS_NO_AUTO_START: The bus must not launch
* an owner for the destination name in response to this method
* invocation.
* @G_DBUS_CALL_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION: the caller is prepared to
* wait for interactive authorization. Since 2.46.
*
* Flags used in g_dbus_connection_call() and similar APIs.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_CALL_FLAGS_NONE = 0,
G_DBUS_CALL_FLAGS_NO_AUTO_START = (1<<0),
G_DBUS_CALL_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION = (1<<1)
} GDBusCallFlags;
/* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */
/**
* GDBusMessageType:
* @G_DBUS_MESSAGE_TYPE_INVALID: Message is of invalid type.
* @G_DBUS_MESSAGE_TYPE_METHOD_CALL: Method call.
* @G_DBUS_MESSAGE_TYPE_METHOD_RETURN: Method reply.
* @G_DBUS_MESSAGE_TYPE_ERROR: Error reply.
* @G_DBUS_MESSAGE_TYPE_SIGNAL: Signal emission.
*
* Message types used in #GDBusMessage.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_MESSAGE_TYPE_INVALID,
G_DBUS_MESSAGE_TYPE_METHOD_CALL,
G_DBUS_MESSAGE_TYPE_METHOD_RETURN,
G_DBUS_MESSAGE_TYPE_ERROR,
G_DBUS_MESSAGE_TYPE_SIGNAL
} GDBusMessageType;
/**
* GDBusMessageFlags:
* @G_DBUS_MESSAGE_FLAGS_NONE: No flags set.
* @G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED: A reply is not expected.
* @G_DBUS_MESSAGE_FLAGS_NO_AUTO_START: The bus must not launch an
* owner for the destination name in response to this message.
* @G_DBUS_MESSAGE_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION: If set on a method
* call, this flag means that the caller is prepared to wait for interactive
* authorization. Since 2.46.
*
* Message flags used in #GDBusMessage.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_MESSAGE_FLAGS_NONE = 0,
G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED = (1<<0),
G_DBUS_MESSAGE_FLAGS_NO_AUTO_START = (1<<1),
G_DBUS_MESSAGE_FLAGS_ALLOW_INTERACTIVE_AUTHORIZATION = (1<<2)
} GDBusMessageFlags;
/**
* GDBusMessageHeaderField:
* @G_DBUS_MESSAGE_HEADER_FIELD_INVALID: Not a valid header field.
* @G_DBUS_MESSAGE_HEADER_FIELD_PATH: The object path.
* @G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE: The interface name.
* @G_DBUS_MESSAGE_HEADER_FIELD_MEMBER: The method or signal name.
* @G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME: The name of the error that occurred.
* @G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL: The serial number the message is a reply to.
* @G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION: The name the message is intended for.
* @G_DBUS_MESSAGE_HEADER_FIELD_SENDER: Unique name of the sender of the message (filled in by the bus).
* @G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE: The signature of the message body.
* @G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS: The number of UNIX file descriptors that accompany the message.
*
* Header fields used in #GDBusMessage.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_MESSAGE_HEADER_FIELD_INVALID,
G_DBUS_MESSAGE_HEADER_FIELD_PATH,
G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE,
G_DBUS_MESSAGE_HEADER_FIELD_MEMBER,
G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME,
G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL,
G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION,
G_DBUS_MESSAGE_HEADER_FIELD_SENDER,
G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE,
G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS
} GDBusMessageHeaderField;
/**
* GDBusPropertyInfoFlags:
* @G_DBUS_PROPERTY_INFO_FLAGS_NONE: No flags set.
* @G_DBUS_PROPERTY_INFO_FLAGS_READABLE: Property is readable.
* @G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE: Property is writable.
*
* Flags describing the access control of a D-Bus property.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_PROPERTY_INFO_FLAGS_NONE = 0,
G_DBUS_PROPERTY_INFO_FLAGS_READABLE = (1<<0),
G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE = (1<<1)
} GDBusPropertyInfoFlags;
/**
* GDBusSubtreeFlags:
* @G_DBUS_SUBTREE_FLAGS_NONE: No flags set.
* @G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES: Method calls to objects not in the enumerated range
* will still be dispatched. This is useful if you want
* to dynamically spawn objects in the subtree.
*
* Flags passed to g_dbus_connection_register_subtree().
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_SUBTREE_FLAGS_NONE = 0,
G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES = (1<<0)
} GDBusSubtreeFlags;
/**
* GDBusServerFlags:
* @G_DBUS_SERVER_FLAGS_NONE: No flags set.
* @G_DBUS_SERVER_FLAGS_RUN_IN_THREAD: All #GDBusServer::new-connection
* signals will run in separated dedicated threads (see signal for
* details).
* @G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: Allow the anonymous
* authentication method.
* @G_DBUS_SERVER_FLAGS_AUTHENTICATION_REQUIRE_SAME_USER: Require the UID of the
* peer to be the same as the UID of the server when authenticating. (Since: 2.68)
*
* Flags used when creating a #GDBusServer.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_SERVER_FLAGS_NONE = 0,
G_DBUS_SERVER_FLAGS_RUN_IN_THREAD = (1<<0),
G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<1),
G_DBUS_SERVER_FLAGS_AUTHENTICATION_REQUIRE_SAME_USER GLIB_AVAILABLE_ENUMERATOR_IN_2_68 = (1<<2)
} GDBusServerFlags;
/**
* GDBusSignalFlags:
* @G_DBUS_SIGNAL_FLAGS_NONE: No flags set.
* @G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE: Don't actually send the AddMatch
* D-Bus call for this signal subscription. This gives you more control
* over which match rules you add (but you must add them manually).
* @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE: Match first arguments that
* contain a bus or interface name with the given namespace.
* @G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH: Match first arguments that
* contain an object path that is either equivalent to the given path,
* or one of the paths is a subpath of the other.
*
* Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
*
* Since: 2.26
*/
typedef enum /*< flags >*/
{
G_DBUS_SIGNAL_FLAGS_NONE = 0,
G_DBUS_SIGNAL_FLAGS_NO_MATCH_RULE = (1<<0),
G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE = (1<<1),
G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH = (1<<2)
} GDBusSignalFlags;
/**
* GDBusSendMessageFlags:
* @G_DBUS_SEND_MESSAGE_FLAGS_NONE: No flags set.
* @G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL: Do not automatically
* assign a serial number from the #GDBusConnection object when
* sending a message.
*
* Flags used when sending #GDBusMessages on a #GDBusConnection.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_SEND_MESSAGE_FLAGS_NONE = 0,
G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL = (1<<0)
} GDBusSendMessageFlags;
/* (1<<31) is reserved for internal use by GDBusConnection, do not use it. */
/**
* GCredentialsType:
* @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type.
* @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a `struct ucred`.
* @G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED: The native credentials type is a `struct cmsgcred`.
* @G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED: The native credentials type is a `struct sockpeercred`. Added in 2.30.
* @G_CREDENTIALS_TYPE_SOLARIS_UCRED: The native credentials type is a `ucred_t`. Added in 2.40.
* @G_CREDENTIALS_TYPE_NETBSD_UNPCBID: The native credentials type is a `struct unpcbid`. Added in 2.42.
* @G_CREDENTIALS_TYPE_APPLE_XUCRED: The native credentials type is a `struct xucred`. Added in 2.66.
* @G_CREDENTIALS_TYPE_WIN32_PID: The native credentials type is a PID `DWORD`. Added in 2.72.
*
* Enumeration describing different kinds of native credential types.
*
* Since: 2.26
*/
typedef enum
{
G_CREDENTIALS_TYPE_INVALID,
G_CREDENTIALS_TYPE_LINUX_UCRED,
G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED,
G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED,
G_CREDENTIALS_TYPE_SOLARIS_UCRED,
G_CREDENTIALS_TYPE_NETBSD_UNPCBID,
G_CREDENTIALS_TYPE_APPLE_XUCRED,
G_CREDENTIALS_TYPE_WIN32_PID,
} GCredentialsType;
/**
* GDBusMessageByteOrder:
* @G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN: The byte order is big endian.
* @G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN: The byte order is little endian.
*
* Enumeration used to describe the byte order of a D-Bus message.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN = 'B',
G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN = 'l'
} GDBusMessageByteOrder;
/**
* GApplicationFlags:
* @G_APPLICATION_FLAGS_NONE: Default
* @G_APPLICATION_IS_SERVICE: Run as a service. In this mode, registration
* fails if the service is already running, and the application
* will initially wait up to 10 seconds for an initial activation
* message to arrive.
* @G_APPLICATION_IS_LAUNCHER: Don't try to become the primary instance.
* @G_APPLICATION_HANDLES_OPEN: This application handles opening files (in
* the primary instance). Note that this flag only affects the default
* implementation of local_command_line(), and has no effect if
* %G_APPLICATION_HANDLES_COMMAND_LINE is given.
* See g_application_run() for details.
* @G_APPLICATION_HANDLES_COMMAND_LINE: This application handles command line
* arguments (in the primary instance). Note that this flag only affect
* the default implementation of local_command_line().
* See g_application_run() for details.
* @G_APPLICATION_SEND_ENVIRONMENT: Send the environment of the
* launching process to the primary instance. Set this flag if your
* application is expected to behave differently depending on certain
* environment variables. For instance, an editor might be expected
* to use the `GIT_COMMITTER_NAME` environment variable
* when editing a git commit message. The environment is available
* to the #GApplication::command-line signal handler, via
* g_application_command_line_getenv().
* @G_APPLICATION_NON_UNIQUE: Make no attempts to do any of the typical
* single-instance application negotiation, even if the application
* ID is given. The application neither attempts to become the
* owner of the application ID nor does it check if an existing
* owner already exists. Everything occurs in the local process.
* Since: 2.30.
* @G_APPLICATION_CAN_OVERRIDE_APP_ID: Allow users to override the
* application ID from the command line with `--gapplication-app-id`.
* Since: 2.48
* @G_APPLICATION_ALLOW_REPLACEMENT: Allow another instance to take over
* the bus name. Since: 2.60
* @G_APPLICATION_REPLACE: Take over from another instance. This flag is
* usually set by passing `--gapplication-replace` on the commandline.
* Since: 2.60
*
* Flags used to define the behaviour of a #GApplication.
*
* Since: 2.28
**/
typedef enum
{
G_APPLICATION_FLAGS_NONE,
G_APPLICATION_IS_SERVICE = (1 << 0),
G_APPLICATION_IS_LAUNCHER = (1 << 1),
G_APPLICATION_HANDLES_OPEN = (1 << 2),
G_APPLICATION_HANDLES_COMMAND_LINE = (1 << 3),
G_APPLICATION_SEND_ENVIRONMENT = (1 << 4),
G_APPLICATION_NON_UNIQUE = (1 << 5),
G_APPLICATION_CAN_OVERRIDE_APP_ID = (1 << 6),
G_APPLICATION_ALLOW_REPLACEMENT = (1 << 7),
G_APPLICATION_REPLACE = (1 << 8)
} GApplicationFlags;
/**
* GTlsError:
* @G_TLS_ERROR_UNAVAILABLE: No TLS provider is available
* @G_TLS_ERROR_MISC: Miscellaneous TLS error
* @G_TLS_ERROR_BAD_CERTIFICATE: The certificate presented could not
* be parsed or failed validation.
* @G_TLS_ERROR_NOT_TLS: The TLS handshake failed because the
* peer does not seem to be a TLS server.
* @G_TLS_ERROR_HANDSHAKE: The TLS handshake failed because the
* peer's certificate was not acceptable.
* @G_TLS_ERROR_CERTIFICATE_REQUIRED: The TLS handshake failed because
* the server requested a client-side certificate, but none was
* provided. See g_tls_connection_set_certificate().
* @G_TLS_ERROR_EOF: The TLS connection was closed without proper
* notice, which may indicate an attack. See
* g_tls_connection_set_require_close_notify().
* @G_TLS_ERROR_INAPPROPRIATE_FALLBACK: The TLS handshake failed
* because the client sent the fallback SCSV, indicating a protocol
* downgrade attack. Since: 2.60
* @G_TLS_ERROR_BAD_CERTIFICATE_PASSWORD: The certificate failed
* to load because a password was incorrect. Since: 2.72
*
* An error code used with %G_TLS_ERROR in a #GError returned from a
* TLS-related routine.
*
* Since: 2.28
*/
typedef enum {
G_TLS_ERROR_UNAVAILABLE,
G_TLS_ERROR_MISC,
G_TLS_ERROR_BAD_CERTIFICATE,
G_TLS_ERROR_NOT_TLS,
G_TLS_ERROR_HANDSHAKE,
G_TLS_ERROR_CERTIFICATE_REQUIRED,
G_TLS_ERROR_EOF,
G_TLS_ERROR_INAPPROPRIATE_FALLBACK,
G_TLS_ERROR_BAD_CERTIFICATE_PASSWORD
} GTlsError;
/**
* GTlsCertificateFlags:
* @G_TLS_CERTIFICATE_FLAGS_NONE: No flags. Since: 2.74
* @G_TLS_CERTIFICATE_UNKNOWN_CA: The signing certificate authority is
* not known.
* @G_TLS_CERTIFICATE_BAD_IDENTITY: The certificate does not match the
* expected identity of the site that it was retrieved from.
* @G_TLS_CERTIFICATE_NOT_ACTIVATED: The certificate's activation time
* is still in the future
* @G_TLS_CERTIFICATE_EXPIRED: The certificate has expired
* @G_TLS_CERTIFICATE_REVOKED: The certificate has been revoked
* according to the #GTlsConnection's certificate revocation list.
* @G_TLS_CERTIFICATE_INSECURE: The certificate's algorithm is
* considered insecure.
* @G_TLS_CERTIFICATE_GENERIC_ERROR: Some other error occurred validating
* the certificate
* @G_TLS_CERTIFICATE_VALIDATE_ALL: the combination of all of the above
* flags
*
* A set of flags describing TLS certification validation. This can be
* used to describe why a particular certificate was rejected (for
* example, in #GTlsConnection::accept-certificate).
*
* GLib guarantees that if certificate verification fails, at least one
* flag will be set, but it does not guarantee that all possible flags
* will be set. Accordingly, you may not safely decide to ignore any
* particular type of error. For example, it would be incorrect to mask
* %G_TLS_CERTIFICATE_EXPIRED if you want to allow expired certificates,
* because this could potentially be the only error flag set even if
* other problems exist with the certificate.
*
* Since: 2.28
*/
typedef enum {
G_TLS_CERTIFICATE_FLAGS_NONE GLIB_AVAILABLE_ENUMERATOR_IN_2_74 = 0,
G_TLS_CERTIFICATE_UNKNOWN_CA = (1 << 0),
G_TLS_CERTIFICATE_BAD_IDENTITY = (1 << 1),
G_TLS_CERTIFICATE_NOT_ACTIVATED = (1 << 2),
G_TLS_CERTIFICATE_EXPIRED = (1 << 3),
G_TLS_CERTIFICATE_REVOKED = (1 << 4),
G_TLS_CERTIFICATE_INSECURE = (1 << 5),
G_TLS_CERTIFICATE_GENERIC_ERROR = (1 << 6),
G_TLS_CERTIFICATE_VALIDATE_ALL = 0x007f
} GTlsCertificateFlags;
/**
* GTlsAuthenticationMode:
* @G_TLS_AUTHENTICATION_NONE: client authentication not required
* @G_TLS_AUTHENTICATION_REQUESTED: client authentication is requested
* @G_TLS_AUTHENTICATION_REQUIRED: client authentication is required
*
* The client authentication mode for a #GTlsServerConnection.
*
* Since: 2.28
*/
typedef enum {
G_TLS_AUTHENTICATION_NONE,
G_TLS_AUTHENTICATION_REQUESTED,
G_TLS_AUTHENTICATION_REQUIRED
} GTlsAuthenticationMode;
/**
* GTlsChannelBindingType:
* @G_TLS_CHANNEL_BINDING_TLS_UNIQUE:
* [`tls-unique`](https://tools.ietf.org/html/rfc5929#section-3) binding
* type
* @G_TLS_CHANNEL_BINDING_TLS_SERVER_END_POINT:
* [`tls-server-end-point`](https://tools.ietf.org/html/rfc5929#section-4)
* binding type
*
* The type of TLS channel binding data to retrieve from #GTlsConnection
* or #GDtlsConnection, as documented by RFC 5929. The
* [`tls-unique-for-telnet`](https://tools.ietf.org/html/rfc5929#section-5)
* binding type is not currently implemented.
*
* Since: 2.66
*/
GLIB_AVAILABLE_TYPE_IN_2_66
typedef enum {
G_TLS_CHANNEL_BINDING_TLS_UNIQUE,
G_TLS_CHANNEL_BINDING_TLS_SERVER_END_POINT
} GTlsChannelBindingType;
/**
* GTlsChannelBindingError:
* @G_TLS_CHANNEL_BINDING_ERROR_NOT_IMPLEMENTED: Either entire binding
* retrieval facility or specific binding type is not implemented in the
* TLS backend.
* @G_TLS_CHANNEL_BINDING_ERROR_INVALID_STATE: The handshake is not yet
* complete on the connection which is a strong requirement for any existing
* binding type.
* @G_TLS_CHANNEL_BINDING_ERROR_NOT_AVAILABLE: Handshake is complete but
* binding data is not available. That normally indicates the TLS
* implementation failed to provide the binding data. For example, some
* implementations do not provide a peer certificate for resumed connections.
* @G_TLS_CHANNEL_BINDING_ERROR_NOT_SUPPORTED: Binding type is not supported
* on the current connection. This error could be triggered when requesting
* `tls-server-end-point` binding data for a certificate which has no hash
* function or uses multiple hash functions.
* @G_TLS_CHANNEL_BINDING_ERROR_GENERAL_ERROR: Any other backend error
* preventing binding data retrieval.
*
* An error code used with %G_TLS_CHANNEL_BINDING_ERROR in a #GError to
* indicate a TLS channel binding retrieval error.
*
* Since: 2.66
*/
GLIB_AVAILABLE_TYPE_IN_2_66
typedef enum {
G_TLS_CHANNEL_BINDING_ERROR_NOT_IMPLEMENTED,
G_TLS_CHANNEL_BINDING_ERROR_INVALID_STATE,
G_TLS_CHANNEL_BINDING_ERROR_NOT_AVAILABLE,
G_TLS_CHANNEL_BINDING_ERROR_NOT_SUPPORTED,
G_TLS_CHANNEL_BINDING_ERROR_GENERAL_ERROR
} GTlsChannelBindingError;
/**
* GTlsRehandshakeMode:
* @G_TLS_REHANDSHAKE_NEVER: Never allow rehandshaking
* @G_TLS_REHANDSHAKE_SAFELY: Allow safe rehandshaking only
* @G_TLS_REHANDSHAKE_UNSAFELY: Allow unsafe rehandshaking
*
* When to allow rehandshaking. See
* g_tls_connection_set_rehandshake_mode().
*
* Since: 2.28
*
* Deprecated: 2.60. Changing the rehandshake mode is no longer
* required for compatibility. Also, rehandshaking has been removed
* from the TLS protocol in TLS 1.3.
*/
typedef enum {
G_TLS_REHANDSHAKE_NEVER,
G_TLS_REHANDSHAKE_SAFELY,
G_TLS_REHANDSHAKE_UNSAFELY
} GTlsRehandshakeMode GLIB_DEPRECATED_TYPE_IN_2_60;
/**
* GTlsPasswordFlags:
* @G_TLS_PASSWORD_NONE: No flags
* @G_TLS_PASSWORD_RETRY: The password was wrong, and the user should retry.
* @G_TLS_PASSWORD_MANY_TRIES: Hint to the user that the password has been
* wrong many times, and the user may not have many chances left.
* @G_TLS_PASSWORD_FINAL_TRY: Hint to the user that this is the last try to get
* this password right.
* @G_TLS_PASSWORD_PKCS11_USER: For PKCS #11, the user PIN is required.
* Since: 2.70.
* @G_TLS_PASSWORD_PKCS11_SECURITY_OFFICER: For PKCS #11, the security officer
* PIN is required. Since: 2.70.
* @G_TLS_PASSWORD_PKCS11_CONTEXT_SPECIFIC: For PKCS #11, the context-specific
* PIN is required. Since: 2.70.
*
* Various flags for the password.
*
* Since: 2.30
*/
typedef enum _GTlsPasswordFlags
{
G_TLS_PASSWORD_NONE = 0,
G_TLS_PASSWORD_RETRY = 1 << 1,
G_TLS_PASSWORD_MANY_TRIES = 1 << 2,
G_TLS_PASSWORD_FINAL_TRY = 1 << 3,
G_TLS_PASSWORD_PKCS11_USER = 1 << 4,
G_TLS_PASSWORD_PKCS11_SECURITY_OFFICER = 1 << 5,
G_TLS_PASSWORD_PKCS11_CONTEXT_SPECIFIC = 1 << 6
} GTlsPasswordFlags;
/**
* GTlsInteractionResult:
* @G_TLS_INTERACTION_UNHANDLED: The interaction was unhandled (i.e. not
* implemented).
* @G_TLS_INTERACTION_HANDLED: The interaction completed, and resulting data
* is available.
* @G_TLS_INTERACTION_FAILED: The interaction has failed, or was cancelled.
* and the operation should be aborted.
*
* #GTlsInteractionResult is returned by various functions in #GTlsInteraction
* when finishing an interaction request.
*
* Since: 2.30
*/
typedef enum {
G_TLS_INTERACTION_UNHANDLED,
G_TLS_INTERACTION_HANDLED,
G_TLS_INTERACTION_FAILED
} GTlsInteractionResult;
/**
* GDBusInterfaceSkeletonFlags:
* @G_DBUS_INTERFACE_SKELETON_FLAGS_NONE: No flags set.
* @G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD: Each method invocation is handled in
* a thread dedicated to the invocation. This means that the method implementation can use blocking IO
* without blocking any other part of the process. It also means that the method implementation must
* use locking to access data structures used by other threads.
*
* Flags describing the behavior of a #GDBusInterfaceSkeleton instance.
*
* Since: 2.30
*/
typedef enum
{
G_DBUS_INTERFACE_SKELETON_FLAGS_NONE = 0,
G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD = (1<<0)
} GDBusInterfaceSkeletonFlags;
/**
* GDBusObjectManagerClientFlags:
* @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE: No flags set.
* @G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START: If not set and the
* manager is for a well-known name, then request the bus to launch
* an owner for the name if no-one owns the name. This flag can only
* be used in managers for well-known names.
*
* Flags used when constructing a #GDBusObjectManagerClient.
*
* Since: 2.30
*/
typedef enum
{
G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE = 0,
G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START = (1<<0)
} GDBusObjectManagerClientFlags;
/**
* GTlsDatabaseVerifyFlags:
* @G_TLS_DATABASE_VERIFY_NONE: No verification flags
*
* Flags for g_tls_database_verify_chain().
*
* Since: 2.30
*/
typedef enum /*< flags >*/ {
G_TLS_DATABASE_VERIFY_NONE = 0
} GTlsDatabaseVerifyFlags;
/**
* GTlsDatabaseLookupFlags:
* @G_TLS_DATABASE_LOOKUP_NONE: No lookup flags
* @G_TLS_DATABASE_LOOKUP_KEYPAIR: Restrict lookup to certificates that have
* a private key.
*
* Flags for g_tls_database_lookup_certificate_for_handle(),
* g_tls_database_lookup_certificate_issuer(),
* and g_tls_database_lookup_certificates_issued_by().
*
* Since: 2.30
*/
typedef enum {
G_TLS_DATABASE_LOOKUP_NONE = 0,
G_TLS_DATABASE_LOOKUP_KEYPAIR = 1
} GTlsDatabaseLookupFlags;
/**
* GTlsCertificateRequestFlags:
* @G_TLS_CERTIFICATE_REQUEST_NONE: No flags
*
* Flags for g_tls_interaction_request_certificate(),
* g_tls_interaction_request_certificate_async(), and
* g_tls_interaction_invoke_request_certificate().
*
* Since: 2.40
*/
typedef enum {
G_TLS_CERTIFICATE_REQUEST_NONE = 0
} GTlsCertificateRequestFlags;
/**
* GTlsProtocolVersion:
* @G_TLS_PROTOCOL_VERSION_UNKNOWN: No protocol version or unknown protocol version
* @G_TLS_PROTOCOL_VERSION_SSL_3_0: SSL 3.0, which is insecure and should not be used
* @G_TLS_PROTOCOL_VERSION_TLS_1_0: TLS 1.0, which is insecure and should not be used
* @G_TLS_PROTOCOL_VERSION_TLS_1_1: TLS 1.1, which is insecure and should not be used
* @G_TLS_PROTOCOL_VERSION_TLS_1_2: TLS 1.2, defined by [RFC 5246](https://datatracker.ietf.org/doc/html/rfc5246)
* @G_TLS_PROTOCOL_VERSION_TLS_1_3: TLS 1.3, defined by [RFC 8446](https://datatracker.ietf.org/doc/html/rfc8446)
* @G_TLS_PROTOCOL_VERSION_DTLS_1_0: DTLS 1.0, which is insecure and should not be used
* @G_TLS_PROTOCOL_VERSION_DTLS_1_2: DTLS 1.2, defined by [RFC 6347](https://datatracker.ietf.org/doc/html/rfc6347)
*
* The TLS or DTLS protocol version used by a #GTlsConnection or
* #GDtlsConnection. The integer values of these versions are sequential
* to ensure newer known protocol versions compare greater than older
* known versions. Any known DTLS protocol version will compare greater
* than any SSL or TLS protocol version. The protocol version may be
* %G_TLS_PROTOCOL_VERSION_UNKNOWN if the TLS backend supports a newer
* protocol version that GLib does not yet know about. This means that
* it's possible for an unknown DTLS protocol version to compare less
* than the TLS protocol versions.
*
* Since: 2.70
*/
typedef enum {
G_TLS_PROTOCOL_VERSION_UNKNOWN = 0,
G_TLS_PROTOCOL_VERSION_SSL_3_0 = 1,
G_TLS_PROTOCOL_VERSION_TLS_1_0 = 2,
G_TLS_PROTOCOL_VERSION_TLS_1_1 = 3,
G_TLS_PROTOCOL_VERSION_TLS_1_2 = 4,
G_TLS_PROTOCOL_VERSION_TLS_1_3 = 5,
G_TLS_PROTOCOL_VERSION_DTLS_1_0 = 201,
G_TLS_PROTOCOL_VERSION_DTLS_1_2 = 202,
} GTlsProtocolVersion;
/**
* GIOModuleScopeFlags:
* @G_IO_MODULE_SCOPE_NONE: No module scan flags
* @G_IO_MODULE_SCOPE_BLOCK_DUPLICATES: When using this scope to load or
* scan modules, automatically block a modules which has the same base
* basename as previously loaded module.
*
* Flags for use with g_io_module_scope_new().
*
* Since: 2.30
*/
typedef enum {
G_IO_MODULE_SCOPE_NONE,
G_IO_MODULE_SCOPE_BLOCK_DUPLICATES
} GIOModuleScopeFlags;
/**
* GSocketClientEvent:
* @G_SOCKET_CLIENT_RESOLVING: The client is doing a DNS lookup.
* @G_SOCKET_CLIENT_RESOLVED: The client has completed a DNS lookup.
* @G_SOCKET_CLIENT_CONNECTING: The client is connecting to a remote
* host (either a proxy or the destination server).
* @G_SOCKET_CLIENT_CONNECTED: The client has connected to a remote
* host.
* @G_SOCKET_CLIENT_PROXY_NEGOTIATING: The client is negotiating
* with a proxy to connect to the destination server.
* @G_SOCKET_CLIENT_PROXY_NEGOTIATED: The client has negotiated
* with the proxy server.
* @G_SOCKET_CLIENT_TLS_HANDSHAKING: The client is performing a
* TLS handshake.
* @G_SOCKET_CLIENT_TLS_HANDSHAKED: The client has performed a
* TLS handshake.
* @G_SOCKET_CLIENT_COMPLETE: The client is done with a particular
* #GSocketConnectable.
*
* Describes an event occurring on a #GSocketClient. See the
* #GSocketClient::event signal for more details.
*
* Additional values may be added to this type in the future.
*
* Since: 2.32
*/
typedef enum {
G_SOCKET_CLIENT_RESOLVING,
G_SOCKET_CLIENT_RESOLVED,
G_SOCKET_CLIENT_CONNECTING,
G_SOCKET_CLIENT_CONNECTED,
G_SOCKET_CLIENT_PROXY_NEGOTIATING,
G_SOCKET_CLIENT_PROXY_NEGOTIATED,
G_SOCKET_CLIENT_TLS_HANDSHAKING,
G_SOCKET_CLIENT_TLS_HANDSHAKED,
G_SOCKET_CLIENT_COMPLETE
} GSocketClientEvent;
/**
* GSocketListenerEvent:
* @G_SOCKET_LISTENER_BINDING: The listener is about to bind a socket.
* @G_SOCKET_LISTENER_BOUND: The listener has bound a socket.
* @G_SOCKET_LISTENER_LISTENING: The listener is about to start
* listening on this socket.
* @G_SOCKET_LISTENER_LISTENED: The listener is now listening on
* this socket.
*
* Describes an event occurring on a #GSocketListener. See the
* #GSocketListener::event signal for more details.
*
* Additional values may be added to this type in the future.
*
* Since: 2.46
*/
typedef enum {
G_SOCKET_LISTENER_BINDING,
G_SOCKET_LISTENER_BOUND,
G_SOCKET_LISTENER_LISTENING,
G_SOCKET_LISTENER_LISTENED
} GSocketListenerEvent;
/**
* GTestDBusFlags:
* @G_TEST_DBUS_NONE: No flags.
*
* Flags to define future #GTestDBus behaviour.
*
* Since: 2.34
*/
typedef enum /*< flags >*/ {
G_TEST_DBUS_NONE = 0
} GTestDBusFlags;
/**
* GSubprocessFlags:
* @G_SUBPROCESS_FLAGS_NONE: No flags.
* @G_SUBPROCESS_FLAGS_STDIN_PIPE: create a pipe for the stdin of the
* spawned process that can be accessed with
* g_subprocess_get_stdin_pipe().
* @G_SUBPROCESS_FLAGS_STDIN_INHERIT: stdin is inherited from the
* calling process.
* @G_SUBPROCESS_FLAGS_STDOUT_PIPE: create a pipe for the stdout of the
* spawned process that can be accessed with
* g_subprocess_get_stdout_pipe().
* @G_SUBPROCESS_FLAGS_STDOUT_SILENCE: silence the stdout of the spawned
* process (ie: redirect to `/dev/null`).
* @G_SUBPROCESS_FLAGS_STDERR_PIPE: create a pipe for the stderr of the
* spawned process that can be accessed with
* g_subprocess_get_stderr_pipe().
* @G_SUBPROCESS_FLAGS_STDERR_SILENCE: silence the stderr of the spawned
* process (ie: redirect to `/dev/null`).
* @G_SUBPROCESS_FLAGS_STDERR_MERGE: merge the stderr of the spawned
* process with whatever the stdout happens to be. This is a good way
* of directing both streams to a common log file, for example.
* @G_SUBPROCESS_FLAGS_INHERIT_FDS: spawned processes will inherit the
* file descriptors of their parent, unless those descriptors have
* been explicitly marked as close-on-exec. This flag has no effect
* over the "standard" file descriptors (stdin, stdout, stderr).
* @G_SUBPROCESS_FLAGS_SEARCH_PATH_FROM_ENVP: if path searching is
* needed when spawning the subprocess, use the `PATH` in the launcher
* environment. (Since: 2.72)
*
* Flags to define the behaviour of a #GSubprocess.
*
* Note that the default for stdin is to redirect from `/dev/null`. For
* stdout and stderr the default are for them to inherit the
* corresponding descriptor from the calling process.
*
* Note that it is a programmer error to mix 'incompatible' flags. For
* example, you may not request both %G_SUBPROCESS_FLAGS_STDOUT_PIPE and
* %G_SUBPROCESS_FLAGS_STDOUT_SILENCE.
*
* Since: 2.40
**/
typedef enum {
G_SUBPROCESS_FLAGS_NONE = 0,
G_SUBPROCESS_FLAGS_STDIN_PIPE = (1u << 0),
G_SUBPROCESS_FLAGS_STDIN_INHERIT = (1u << 1),
G_SUBPROCESS_FLAGS_STDOUT_PIPE = (1u << 2),
G_SUBPROCESS_FLAGS_STDOUT_SILENCE = (1u << 3),
G_SUBPROCESS_FLAGS_STDERR_PIPE = (1u << 4),
G_SUBPROCESS_FLAGS_STDERR_SILENCE = (1u << 5),
G_SUBPROCESS_FLAGS_STDERR_MERGE = (1u << 6),
G_SUBPROCESS_FLAGS_INHERIT_FDS = (1u << 7),
G_SUBPROCESS_FLAGS_SEARCH_PATH_FROM_ENVP = (1u << 8)
} GSubprocessFlags;
/**
* GNotificationPriority:
* @G_NOTIFICATION_PRIORITY_LOW: for notifications that do not require
* immediate attention - typically used for contextual background
* information, such as contact birthdays or local weather
* @G_NOTIFICATION_PRIORITY_NORMAL: the default priority, to be used for the
* majority of notifications (for example email messages, software updates,
* completed download/sync operations)
* @G_NOTIFICATION_PRIORITY_HIGH: for events that require more attention,
* usually because responses are time-sensitive (for example chat and SMS
* messages or alarms)
* @G_NOTIFICATION_PRIORITY_URGENT: for urgent notifications, or notifications
* that require a response in a short space of time (for example phone calls
* or emergency warnings)
*
* Priority levels for #GNotifications.
*
* Since: 2.42
*/
typedef enum {
G_NOTIFICATION_PRIORITY_NORMAL,
G_NOTIFICATION_PRIORITY_LOW,
G_NOTIFICATION_PRIORITY_HIGH,
G_NOTIFICATION_PRIORITY_URGENT
} GNotificationPriority;
/**
* GNetworkConnectivity:
* @G_NETWORK_CONNECTIVITY_LOCAL: The host is not configured with a
* route to the Internet; it may or may not be connected to a local
* network.
* @G_NETWORK_CONNECTIVITY_LIMITED: The host is connected to a network, but
* does not appear to be able to reach the full Internet, perhaps
* due to upstream network problems.
* @G_NETWORK_CONNECTIVITY_PORTAL: The host is behind a captive portal and
* cannot reach the full Internet.
* @G_NETWORK_CONNECTIVITY_FULL: The host is connected to a network, and
* appears to be able to reach the full Internet.
*
* The host's network connectivity state, as reported by #GNetworkMonitor.
*
* Since: 2.44
*/
typedef enum {
G_NETWORK_CONNECTIVITY_LOCAL = 1,
G_NETWORK_CONNECTIVITY_LIMITED = 2,
G_NETWORK_CONNECTIVITY_PORTAL = 3,
G_NETWORK_CONNECTIVITY_FULL = 4
} GNetworkConnectivity;
/**
* GPollableReturn:
* @G_POLLABLE_RETURN_FAILED: Generic error condition for when an operation fails.
* @G_POLLABLE_RETURN_OK: The operation was successfully finished.
* @G_POLLABLE_RETURN_WOULD_BLOCK: The operation would block.
*
* Return value for various IO operations that signal errors via the
* return value and not necessarily via a #GError.
*
* This enum exists to be able to return errors to callers without having to
* allocate a #GError. Allocating #GErrors can be quite expensive for
* regularly happening errors like %G_IO_ERROR_WOULD_BLOCK.
*
* In case of %G_POLLABLE_RETURN_FAILED a #GError should be set for the
* operation to give details about the error that happened.
*
* Since: 2.60
*/
typedef enum {
G_POLLABLE_RETURN_FAILED = 0,
G_POLLABLE_RETURN_OK = 1,
G_POLLABLE_RETURN_WOULD_BLOCK = -G_IO_ERROR_WOULD_BLOCK
} GPollableReturn;
/**
* GMemoryMonitorWarningLevel:
* @G_MEMORY_MONITOR_WARNING_LEVEL_LOW: Memory on the device is low, processes
* should free up unneeded resources (for example, in-memory caches) so they can
* be used elsewhere.
* @G_MEMORY_MONITOR_WARNING_LEVEL_MEDIUM: Same as @G_MEMORY_MONITOR_WARNING_LEVEL_LOW
* but the device has even less free memory, so processes should try harder to free
* up unneeded resources. If your process does not need to stay running, it is a
* good time for it to quit.
* @G_MEMORY_MONITOR_WARNING_LEVEL_CRITICAL: The system will soon start terminating
* processes to reclaim memory, including background processes.
*
* Memory availability warning levels.
*
* Note that because new values might be added, it is recommended that applications check
* #GMemoryMonitorWarningLevel as ranges, for example:
* |[<!-- language="C" -->
* if (warning_level > G_MEMORY_MONITOR_WARNING_LEVEL_LOW)
* drop_caches ();
* ]|
*
* Since: 2.64
*/
typedef enum {
G_MEMORY_MONITOR_WARNING_LEVEL_LOW = 50,
G_MEMORY_MONITOR_WARNING_LEVEL_MEDIUM = 100,
G_MEMORY_MONITOR_WARNING_LEVEL_CRITICAL = 255
} GMemoryMonitorWarningLevel;
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */
Reference in New Issue View Git Blame Copy Permalink