glib/po/zh_HK.po
Matthias Clasen 296d481c7e 2.21.6
2009-09-04 21:19:02 -04:00

2038 lines
60 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Chinese (Hong Kong) translation for glib 2.x
# Copyright (C) 2001, 02, 03, 05, 07 Free Software Foundation, Inc.
# XML glossary from http://xml.ascc.net/zh/big5/gloss.html
# Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2005.
# Abel Cheung <abel@oaka.org>, 2001-2003, 2005.
# Woodman Tuen <wmtuen@gmail.com>, 2005-07.
#
#
msgid ""
msgstr ""
"Project-Id-Version: glib 2.21.4\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-09-04 20:42-0400\n"
"PO-Revision-Date: 2009-07-18 21:08+0800\n"
"Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
"Language-Team: Chinese (Hong Kong) <community@linuxhall.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0\n"
#: glib/gbookmarkfile.c:737
#, c-format
msgid "Unexpected attribute '%s' for element '%s'"
msgstr "元件「%2$s」中有未預期的屬性「%1$s」"
#: glib/gbookmarkfile.c:748 glib/gbookmarkfile.c:819 glib/gbookmarkfile.c:829
#: glib/gbookmarkfile.c:936
#, c-format
msgid "Attribute '%s' of element '%s' not found"
msgstr "找不到元件「%2$s」中的屬性「%1$s」"
#: glib/gbookmarkfile.c:1106 glib/gbookmarkfile.c:1171
#: glib/gbookmarkfile.c:1235 glib/gbookmarkfile.c:1245
#, c-format
msgid "Unexpected tag '%s', tag '%s' expected"
msgstr "未預期的標籤「%s」應為標籤「%s」"
#: glib/gbookmarkfile.c:1131 glib/gbookmarkfile.c:1145
#: glib/gbookmarkfile.c:1213 glib/gbookmarkfile.c:1265
#, c-format
msgid "Unexpected tag '%s' inside '%s'"
msgstr "「%2$s」中有未預期的標籤「%1$s」"
#: glib/gbookmarkfile.c:1793
msgid "No valid bookmark file found in data dirs"
msgstr "在資料目錄中找不到有效的書籤檔案"
#: glib/gbookmarkfile.c:1994
#, c-format
msgid "A bookmark for URI '%s' already exists"
msgstr "URI「%s」的書籤已經存在"
#: glib/gbookmarkfile.c:2040 glib/gbookmarkfile.c:2198
#: glib/gbookmarkfile.c:2283 glib/gbookmarkfile.c:2363
#: glib/gbookmarkfile.c:2448 glib/gbookmarkfile.c:2531
#: glib/gbookmarkfile.c:2609 glib/gbookmarkfile.c:2688
#: glib/gbookmarkfile.c:2730 glib/gbookmarkfile.c:2827
#: glib/gbookmarkfile.c:2953 glib/gbookmarkfile.c:3143
#: glib/gbookmarkfile.c:3219 glib/gbookmarkfile.c:3384
#: glib/gbookmarkfile.c:3473 glib/gbookmarkfile.c:3563
#: glib/gbookmarkfile.c:3691
#, c-format
msgid "No bookmark found for URI '%s'"
msgstr "找不到 URI「%s」的書籤"
#: glib/gbookmarkfile.c:2372
#, c-format
msgid "No MIME type defined in the bookmark for URI '%s'"
msgstr "URI「%s」書籤中沒有定義 MIME 類型"
#: glib/gbookmarkfile.c:2457
#, c-format
msgid "No private flag has been defined in bookmark for URI '%s'"
msgstr "URI「%s」書籤中沒有私有旗幟"
#: glib/gbookmarkfile.c:2836
#, c-format
msgid "No groups set in bookmark for URI '%s'"
msgstr "URI「%s」書籤中沒有設定羣組"
#: glib/gbookmarkfile.c:3237 glib/gbookmarkfile.c:3394
#, c-format
msgid "No application with name '%s' registered a bookmark for '%s'"
msgstr "沒有名為「%s」的應用程式註冊書籤「%s」"
#: glib/gbookmarkfile.c:3417
#, c-format
msgid "Failed to expand exec line '%s' with URI '%s'"
msgstr "以 URI%2$s 展開 exec 行‘%1$s失敗"
#: glib/gconvert.c:431 glib/gconvert.c:509 glib/giochannel.c:1230
#, c-format
msgid "Conversion from character set '%s' to '%s' is not supported"
msgstr "不支援將字符集‘%s轉換成%s"
#: glib/gconvert.c:435 glib/gconvert.c:513
#, c-format
msgid "Could not open converter from '%s' to '%s'"
msgstr "無法將‘%s轉換至%s"
#: glib/gconvert.c:632 glib/gconvert.c:1025 glib/giochannel.c:1402
#: glib/giochannel.c:1444 glib/giochannel.c:2288 glib/gutf8.c:964
#: glib/gutf8.c:1413
msgid "Invalid byte sequence in conversion input"
msgstr "轉換輸入資料時遇到不正確的位元組組合"
#: glib/gconvert.c:640 glib/gconvert.c:950 glib/giochannel.c:1409
#: glib/giochannel.c:2300
#, c-format
msgid "Error during conversion: %s"
msgstr "轉換時發生錯誤:%s"
#: glib/gconvert.c:672 glib/gutf8.c:960 glib/gutf8.c:1164 glib/gutf8.c:1305
#: glib/gutf8.c:1409
msgid "Partial character sequence at end of input"
msgstr "輸入資料結束時字符仍未完整"
#: glib/gconvert.c:922
#, c-format
msgid "Cannot convert fallback '%s' to codeset '%s'"
msgstr "無法將後備字串‘%s的字符集轉換成%s"
#: glib/gconvert.c:1745
#, c-format
msgid "The URI '%s' is not an absolute URI using the \"file\" scheme"
msgstr "URI%s不是使用“file”格式的絕對 URI"
#: glib/gconvert.c:1755
#, c-format
msgid "The local file URI '%s' may not include a '#'"
msgstr "本機檔案的 URI%s不應含有#"
#: glib/gconvert.c:1772
#, c-format
msgid "The URI '%s' is invalid"
msgstr "URI%s無效"
#: glib/gconvert.c:1784
#, c-format
msgid "The hostname of the URI '%s' is invalid"
msgstr "URI%s中的主機名稱無效"
#: glib/gconvert.c:1800
#, c-format
msgid "The URI '%s' contains invalidly escaped characters"
msgstr "URI%s含有「不正確跳出」的字符"
#: glib/gconvert.c:1895
#, c-format
msgid "The pathname '%s' is not an absolute path"
msgstr "路徑名稱‘%s不是絕對路徑"
#: glib/gconvert.c:1905
msgid "Invalid hostname"
msgstr "主機名稱無效"
#: glib/gdir.c:112 glib/gdir.c:135
#, c-format
msgid "Error opening directory '%s': %s"
msgstr "開啟目錄‘%s時發生錯誤%s"
#: glib/gfileutils.c:529 glib/gfileutils.c:617
#, c-format
msgid "Could not allocate %lu bytes to read file \"%s\""
msgstr "無法配置 %lu 位元來讀取檔案“%s”"
#: glib/gfileutils.c:544
#, c-format
msgid "Error reading file '%s': %s"
msgstr "讀取檔案‘%s時發生錯誤%s"
#: glib/gfileutils.c:558
#, c-format
msgid "File \"%s\" is too large"
msgstr "檔案「%s」太過巨大"
#: glib/gfileutils.c:641
#, c-format
msgid "Failed to read from file '%s': %s"
msgstr "讀取檔案‘%s失敗%s"
#: glib/gfileutils.c:692 glib/gfileutils.c:779
#, c-format
msgid "Failed to open file '%s': %s"
msgstr "開啟檔案「%s」失敗%s"
#: glib/gfileutils.c:709 glib/gmappedfile.c:141
#, c-format
msgid "Failed to get attributes of file '%s': fstat() failed: %s"
msgstr "獲取檔案‘%s的屬性失敗fstat() 失敗:%s"
#: glib/gfileutils.c:743
#, c-format
msgid "Failed to open file '%s': fdopen() failed: %s"
msgstr "開啟檔案‘%s失敗fdopen() 失敗:%s"
#: glib/gfileutils.c:851
#, c-format
msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s"
msgstr "檔案名稱由‘%s改為%s失敗g_rename() 失敗:%s"
#: glib/gfileutils.c:893 glib/gfileutils.c:1359
#, c-format
msgid "Failed to create file '%s': %s"
msgstr "建立檔案‘%s失敗%s"
#: glib/gfileutils.c:907
#, c-format
msgid "Failed to open file '%s' for writing: fdopen() failed: %s"
msgstr "開啟檔案‘%s作寫入失敗fdopen() 失敗:%s"
#: glib/gfileutils.c:932
#, c-format
msgid "Failed to write file '%s': fwrite() failed: %s"
msgstr "寫入檔案‘%s失敗fwrite() 失敗:%s"
#: glib/gfileutils.c:951
#, c-format
msgid "Failed to write file '%s': fflush() failed: %s"
msgstr "無法寫入檔案「%s」fflush() 失敗:%s"
#: glib/gfileutils.c:980
#, c-format
msgid "Failed to write file '%s': fsync() failed: %s"
msgstr "無法寫入檔案「%s」fsync() 失敗:%s"
#: glib/gfileutils.c:999
#, c-format
msgid "Failed to close file '%s': fclose() failed: %s"
msgstr "關閉檔案‘%s失敗fclose() 失敗:%s"
#: glib/gfileutils.c:1117
#, c-format
msgid "Existing file '%s' could not be removed: g_unlink() failed: %s"
msgstr "現存檔案‘%s無法移除g_unlink() 失敗:%s"
#: glib/gfileutils.c:1321
#, c-format
msgid "Template '%s' invalid, should not contain a '%s'"
msgstr "樣式‘%s無效不應含有%s"
# (Abel) this is file template for mktemp/mkstemp
#: glib/gfileutils.c:1334
#, c-format
msgid "Template '%s' doesn't contain XXXXXX"
msgstr "檔案樣式‘%s沒有包含 XXXXXX"
#: glib/gfileutils.c:1765
#, c-format
msgid "%u byte"
msgid_plural "%u bytes"
msgstr[0] "%u 位元組"
#: glib/gfileutils.c:1773
#, c-format
msgid "%.1f KB"
msgstr "%.1f KB"
#: glib/gfileutils.c:1778
#, c-format
msgid "%.1f MB"
msgstr "%.1f MB"
#: glib/gfileutils.c:1783
#, c-format
msgid "%.1f GB"
msgstr "%.1f GB"
#: glib/gfileutils.c:1826
#, c-format
msgid "Failed to read the symbolic link '%s': %s"
msgstr "讀取符號連結‘%s失敗%s"
#: glib/gfileutils.c:1847
msgid "Symbolic links not supported"
msgstr "不支援符號連結"
#: glib/giochannel.c:1234
#, c-format
msgid "Could not open converter from '%s' to '%s': %s"
msgstr "無法開啟將‘%s轉換至%s的轉換器%s"
#: glib/giochannel.c:1579
msgid "Can't do a raw read in g_io_channel_read_line_string"
msgstr "在 g_io_channel_read_line_string 中無法讀取原始資料"
#: glib/giochannel.c:1626 glib/giochannel.c:1884 glib/giochannel.c:1971
msgid "Leftover unconverted data in read buffer"
msgstr "用來讀取資料的緩衝區中仍有未轉換的資料"
#: glib/giochannel.c:1707 glib/giochannel.c:1784
msgid "Channel terminates in a partial character"
msgstr "在字符未完整之前,輸入管道已經結束"
#: glib/giochannel.c:1770
msgid "Can't do a raw read in g_io_channel_read_to_end"
msgstr "g_io_channel_read_to_end 中無法讀取原始資料"
#: glib/gmappedfile.c:123
#, c-format
msgid "Failed to open file '%s': open() failed: %s"
msgstr "開啟檔案‘%s失敗open() 失敗:%s"
#: glib/gmappedfile.c:201
#, c-format
msgid "Failed to map file '%s': mmap() failed: %s"
msgstr "對應檔案‘%s失敗mmap() 失敗:%s"
#: glib/gmarkup.c:303 glib/gmarkup.c:343
#, c-format
msgid "Error on line %d char %d: "
msgstr "第 %d 行第 %d 個字發生錯誤:"
#: glib/gmarkup.c:363 glib/gmarkup.c:441
#, c-format
msgid "Invalid UTF-8 encoded text in name - not valid '%s'"
msgstr "名稱中無效的 UTF-8 編碼文字 - 不是合法的「%s」"
#: glib/gmarkup.c:374
#, c-format
msgid "'%s' is not a valid name "
msgstr "「%s」不是一個有效的名稱"
#: glib/gmarkup.c:390
#, c-format
msgid "'%s' is not a valid name: '%c' "
msgstr "「%s」不是一個有效的名稱「%c」"
#: glib/gmarkup.c:494
#, c-format
msgid "Error on line %d: %s"
msgstr "第 %d 行發生錯誤:%s"
#: glib/gmarkup.c:578
#, c-format
msgid ""
"Failed to parse '%-.*s', which should have been a digit inside a character "
"reference (&#234; for example) - perhaps the digit is too large"
msgstr "無法解析‘%-.*s字符參引內應該含有數字例如 &#234;)─ 可能是數字太大"
#: glib/gmarkup.c:590
msgid ""
"Character reference did not end with a semicolon; most likely you used an "
"ampersand character without intending to start an entity - escape ampersand "
"as &amp;"
msgstr ""
"字符參引的結束部分不是分號;很可能你想使用 & 字符但未將它變為實體 ─ 請將 & 轉"
"換為 &amp;"
#: glib/gmarkup.c:616
#, c-format
msgid "Character reference '%-.*s' does not encode a permitted character"
msgstr "字符參引‘%-.*s無法表示任何能接受的字符"
#: glib/gmarkup.c:654
msgid ""
"Empty entity '&;' seen; valid entities are: &amp; &quot; &lt; &gt; &apos;"
msgstr "出現空白的實體‘&;’;可用的實體為:&amp; &quot; &lt; &gt; &apos;"
#: glib/gmarkup.c:662
#, c-format
msgid "Entity name '%-.*s' is not known"
msgstr "實體名稱 '%-.*s' 意義不明"
#: glib/gmarkup.c:667
msgid ""
"Entity did not end with a semicolon; most likely you used an ampersand "
"character without intending to start an entity - escape ampersand as &amp;"
msgstr ""
"實體的結束部分不是分號;很可能你想使用 & 字符但未將它變為實體 ─ 請將 & 轉換"
"為 &amp;"
#: glib/gmarkup.c:1014
msgid "Document must begin with an element (e.g. <book>)"
msgstr "文件開始必須為一元素(例如 <book>"
#: glib/gmarkup.c:1054
#, c-format
msgid ""
"'%s' is not a valid character following a '<' character; it may not begin an "
"element name"
msgstr "<’字符後的‘%s不是有效的字符這樣不可能是元素名稱的開始部份"
#: glib/gmarkup.c:1122
#, c-format
msgid ""
"Odd character '%s', expected a '>' character to end the empty-element tag '%"
"s'"
msgstr "字符「%s」只有一半空元素標籤「%s」的結尾應該以>’字符結束"
#: glib/gmarkup.c:1206
#, c-format
msgid ""
"Odd character '%s', expected a '=' after attribute name '%s' of element '%s'"
msgstr "不尋常的字符‘%s屬性名稱%s屬於元素%s後應該是=’字符"
#: glib/gmarkup.c:1247
#, c-format
msgid ""
"Odd character '%s', expected a '>' or '/' character to end the start tag of "
"element '%s', or optionally an attribute; perhaps you used an invalid "
"character in an attribute name"
msgstr ""
"不尋常的字符‘%s元素%s的開始標籤應該以>’或‘/’字符終結,也可以是屬性;或"
"許你在屬性名稱中使用了無效的字符"
#: glib/gmarkup.c:1291
#, c-format
msgid ""
"Odd character '%s', expected an open quote mark after the equals sign when "
"giving value for attribute '%s' of element '%s'"
msgstr ""
"不尋常的字符‘%s當指定屬性%s的值屬於元素%s等號後應該出現開引號"
#: glib/gmarkup.c:1425
#, c-format
msgid ""
"'%s' is not a valid character following the characters '</'; '%s' may not "
"begin an element name"
msgstr "</’字符後的‘%s不是有效的字符%s不可能是元素名稱的開始部份"
#: glib/gmarkup.c:1461
#, c-format
msgid ""
"'%s' is not a valid character following the close element name '%s'; the "
"allowed character is '>'"
msgstr "字符‘%s是無效的位置在關閉元素%s末端允許的字符為「>」"
#: glib/gmarkup.c:1472
#, c-format
msgid "Element '%s' was closed, no element is currently open"
msgstr "元素‘%s已關閉沒有開啟中的元素"
#: glib/gmarkup.c:1481
#, c-format
msgid "Element '%s' was closed, but the currently open element is '%s'"
msgstr "元素‘%s已關閉但開啟中的元素是%s"
#: glib/gmarkup.c:1648
msgid "Document was empty or contained only whitespace"
msgstr "文件完全空白或只含有空白字符"
#: glib/gmarkup.c:1662
msgid "Document ended unexpectedly just after an open angle bracket '<'"
msgstr "文件在尖角括號‘<’後突然終止"
#: glib/gmarkup.c:1670 glib/gmarkup.c:1715
#, c-format
msgid ""
"Document ended unexpectedly with elements still open - '%s' was the last "
"element opened"
msgstr "在仍然有開啟中的元素時,文件突然結束 ─‘%s是最後一個開啟的元素"
#: glib/gmarkup.c:1678
#, c-format
msgid ""
"Document ended unexpectedly, expected to see a close angle bracket ending "
"the tag <%s/>"
msgstr "文件突然結束,本來應該出現用來關閉標籤 <%s/> 的尖角括號"
#: glib/gmarkup.c:1684
msgid "Document ended unexpectedly inside an element name"
msgstr "在元素的名稱內,文件突然結束"
#: glib/gmarkup.c:1690
msgid "Document ended unexpectedly inside an attribute name"
msgstr "在屬性名稱內,文件突然結束"
#: glib/gmarkup.c:1695
msgid "Document ended unexpectedly inside an element-opening tag."
msgstr "在元素的開啟標籤內,文件突然結束"
#: glib/gmarkup.c:1701
msgid ""
"Document ended unexpectedly after the equals sign following an attribute "
"name; no attribute value"
msgstr "在屬性名稱的等號後,文件突然結束;沒有屬性值"
#: glib/gmarkup.c:1708
msgid "Document ended unexpectedly while inside an attribute value"
msgstr "在屬性值內,文件突然結束"
#: glib/gmarkup.c:1724
#, c-format
msgid "Document ended unexpectedly inside the close tag for element '%s'"
msgstr "在元素‘%s的關閉標籤內文件突然結束"
#: glib/gmarkup.c:1730
msgid "Document ended unexpectedly inside a comment or processing instruction"
msgstr "在註解或處理指示內,文件突然結束"
#: glib/gregex.c:131
msgid "corrupted object"
msgstr "損毀的物件"
#: glib/gregex.c:133
msgid "internal error or corrupted object"
msgstr "內部錯誤或損毀的物件"
#: glib/gregex.c:135
msgid "out of memory"
msgstr "記憶體耗盡"
#: glib/gregex.c:140
msgid "backtracking limit reached"
msgstr "已達回溯上限"
#: glib/gregex.c:152 glib/gregex.c:160
msgid "the pattern contains items not supported for partial matching"
msgstr "此模式包含了不支援部分比對的項目"
#: glib/gregex.c:154 gio/glocalfile.c:2105
msgid "internal error"
msgstr "內部的錯誤"
#: glib/gregex.c:162
msgid "back references as conditions are not supported for partial matching"
msgstr "部分比對不支援以反向參照為條件"
#: glib/gregex.c:171
msgid "recursion limit reached"
msgstr "已達遞廻上限"
#: glib/gregex.c:173
msgid "workspace limit for empty substrings reached"
msgstr "已達空白子字串的工作區上限"
#: glib/gregex.c:175
msgid "invalid combination of newline flags"
msgstr "無效的換行旗標組合"
#: glib/gregex.c:179
msgid "unknown error"
msgstr "不明的錯誤"
#: glib/gregex.c:199
msgid "\\ at end of pattern"
msgstr "\\ 於模式結尾"
#: glib/gregex.c:202
msgid "\\c at end of pattern"
msgstr "\\c 於模式結尾"
#: glib/gregex.c:205
msgid "unrecognized character follows \\"
msgstr "無法辨識的字符接着 \\"
#: glib/gregex.c:212
msgid "case-changing escapes (\\l, \\L, \\u, \\U) are not allowed here"
msgstr "這裏不允許使用改變大小寫的轉義符(\\l, \\L, \\u, \\U)"
#: glib/gregex.c:215
msgid "numbers out of order in {} quantifier"
msgstr "{} 裏的數字次序顛倒了"
#: glib/gregex.c:218
msgid "number too big in {} quantifier"
msgstr "{} 裏的數字太大了"
#: glib/gregex.c:221
msgid "missing terminating ] for character class"
msgstr "字符類別缺少結束的 ]"
#: glib/gregex.c:224
msgid "invalid escape sequence in character class"
msgstr "字符類別中無效的跳脫序列"
#: glib/gregex.c:227
msgid "range out of order in character class"
msgstr "字符類別的範圍次序顛倒"
#: glib/gregex.c:230
msgid "nothing to repeat"
msgstr "沒有東西可重複"
#: glib/gregex.c:233
msgid "unrecognized character after (?"
msgstr "在 (? 後有無法辨識的字符"
#: glib/gregex.c:237
msgid "unrecognized character after (?<"
msgstr "在 (?< 後有無法辨識的字符"
#: glib/gregex.c:241
msgid "unrecognized character after (?P"
msgstr "在 (?P 後有無法辨識的字符"
#: glib/gregex.c:244
msgid "POSIX named classes are supported only within a class"
msgstr "POSIX 命名類別只在單一類別中支援"
#: glib/gregex.c:247
msgid "missing terminating )"
msgstr "缺少結束的 )"
#: glib/gregex.c:251
msgid ") without opening ("
msgstr ") 沒有開頭的 ("
#. translators: '(?R' and '(?[+-]digits' are both meant as (groups of)
#. * sequences here, '(?-54' would be an example for the second group.
#.
#: glib/gregex.c:258
msgid "(?R or (?[+-]digits must be followed by )"
msgstr "(?R 或 (?[+-]數字必須接着 )"
#: glib/gregex.c:261
msgid "reference to non-existent subpattern"
msgstr "參照不存在的子模式"
#: glib/gregex.c:264
msgid "missing ) after comment"
msgstr "註解後缺少 )"
#: glib/gregex.c:267
msgid "regular expression too large"
msgstr "正規表示式太長"
#: glib/gregex.c:270
msgid "failed to get memory"
msgstr "取得記憶體失敗"
#: glib/gregex.c:273
msgid "lookbehind assertion is not fixed length"
msgstr "lookbehind 判斷提示(assertion) 不是固定的長度"
#: glib/gregex.c:276
msgid "malformed number or name after (?("
msgstr "(?( 之後有格式不正確的數字或名稱"
#: glib/gregex.c:279
msgid "conditional group contains more than two branches"
msgstr "條件式羣組包含了兩個以上的分支"
#: glib/gregex.c:282
msgid "assertion expected after (?("
msgstr "(?( 後應該有判斷提示(assertion)"
#: glib/gregex.c:285
msgid "unknown POSIX class name"
msgstr "未知的 POSIX 類別名稱"
#: glib/gregex.c:288
msgid "POSIX collating elements are not supported"
msgstr "不支援 POSIX 整理元件"
#: glib/gregex.c:291
msgid "character value in \\x{...} sequence is too large"
msgstr "\\x{...} 序列中的字符值太大"
#: glib/gregex.c:294
msgid "invalid condition (?(0)"
msgstr "無效的條件 (?(0)"
#: glib/gregex.c:297
msgid "\\C not allowed in lookbehind assertion"
msgstr "在 lookbehind 判斷提示(assertion) 中不支援\\C"
#: glib/gregex.c:300
msgid "recursive call could loop indefinitely"
msgstr "遞廻呼叫可能變成無限廻圈"
#: glib/gregex.c:303
msgid "missing terminator in subpattern name"
msgstr "子模式名稱中缺少結束字符"
#: glib/gregex.c:306
msgid "two named subpatterns have the same name"
msgstr "兩個命名的子模式具有相同的名稱"
#: glib/gregex.c:309
msgid "malformed \\P or \\p sequence"
msgstr "格式不正確的 \\P 或 \\p 序列"
#: glib/gregex.c:312
msgid "unknown property name after \\P or \\p"
msgstr "在 \\P 或 \\p 後有未知的屬性名稱"
#: glib/gregex.c:315
msgid "subpattern name is too long (maximum 32 characters)"
msgstr "子模式名稱太長(最多 32 字符)"
#: glib/gregex.c:318
msgid "too many named subpatterns (maximum 10,000)"
msgstr "太多命名的子模式(最大值 10,000"
#: glib/gregex.c:321
msgid "octal value is greater than \\377"
msgstr "8 進位值大於 \\377"
#: glib/gregex.c:324
msgid "DEFINE group contains more than one branch"
msgstr "DEFINE 羣組包含一個以上的分支"
#: glib/gregex.c:327
msgid "repeating a DEFINE group is not allowed"
msgstr "不允許重複 DEFINE 羣組"
#: glib/gregex.c:330
msgid "inconsistent NEWLINE options"
msgstr "不一致的 NEWLINE 選項"
#: glib/gregex.c:333
msgid ""
"\\g is not followed by a braced name or an optionally braced non-zero number"
msgstr "\\g 並未隨着具有大括弧的名稱或選用的具大括弧的非零數值"
#: glib/gregex.c:338
msgid "unexpected repeat"
msgstr "未預期的重複"
#: glib/gregex.c:342
msgid "code overflow"
msgstr "程式碼溢流"
#: glib/gregex.c:346
msgid "overran compiling workspace"
msgstr "編譯工作區超出範圍"
#: glib/gregex.c:350
msgid "previously-checked referenced subpattern not found"
msgstr "找不到預先核取的參照子字串"
#: glib/gregex.c:526 glib/gregex.c:1607
#, c-format
msgid "Error while matching regular expression %s: %s"
msgstr "比對正規表示式 %s 發生錯誤:%s"
#: glib/gregex.c:1098
msgid "PCRE library is compiled without UTF8 support"
msgstr "PCRE 程式庫並未編譯對 UTF8 的支援"
#: glib/gregex.c:1107
msgid "PCRE library is compiled without UTF8 properties support"
msgstr "PCRE 程式庫並未編譯對 UTF8 屬性的支援"
#: glib/gregex.c:1161
#, c-format
msgid "Error while compiling regular expression %s at char %d: %s"
msgstr "編譯正規表示式 %s 時於第 %d 個字發生錯誤:%s"
#: glib/gregex.c:1197
#, c-format
msgid "Error while optimizing regular expression %s: %s"
msgstr "最佳化正規表示式 %s 時發生錯誤:%s"
#: glib/gregex.c:2035
msgid "hexadecimal digit or '}' expected"
msgstr "應為 16 進位數字或「}」"
#: glib/gregex.c:2051
msgid "hexadecimal digit expected"
msgstr "應為 16 進位數字"
#: glib/gregex.c:2091
msgid "missing '<' in symbolic reference"
msgstr "在符號參照中缺少「<」"
#: glib/gregex.c:2100
msgid "unfinished symbolic reference"
msgstr "未完成的符號參照"
#: glib/gregex.c:2107
msgid "zero-length symbolic reference"
msgstr "零-長度的符號參照"
#: glib/gregex.c:2118
msgid "digit expected"
msgstr "預期數字"
#: glib/gregex.c:2136
msgid "illegal symbolic reference"
msgstr "不合法的符號參照"
#: glib/gregex.c:2198
msgid "stray final '\\'"
msgstr "缺少最後的「\\」"
#: glib/gregex.c:2202
msgid "unknown escape sequence"
msgstr "不明的跳脫序列"
#: glib/gregex.c:2212
#, c-format
msgid "Error while parsing replacement text \"%s\" at char %lu: %s"
msgstr "當分析於字符 %2$lu 的取代文字「%1$s」時發生錯誤%3$s"
#: glib/gshell.c:70
msgid "Quoted text doesn't begin with a quotation mark"
msgstr "應該用引號括起來的文字不是以括號為開始"
#: glib/gshell.c:160
msgid "Unmatched quotation mark in command line or other shell-quoted text"
msgstr "指令列或其它標為指令的字串內有不對稱的引號"
#: glib/gshell.c:538
#, c-format
msgid "Text ended just after a '\\' character. (The text was '%s')"
msgstr "文字在‘\\’字符後就終止了。(文字為‘%s"
#: glib/gshell.c:545
#, c-format
msgid "Text ended before matching quote was found for %c. (The text was '%s')"
msgstr "字串完結前仍沒有對應於 %c 的引號(字串為‘%s"
#: glib/gshell.c:557
msgid "Text was empty (or contained only whitespace)"
msgstr "文字是空白的(或只含有空白字符)"
#: glib/gspawn-win32.c:283
msgid "Failed to read data from child process"
msgstr "無法從副進程讀取資料"
#: glib/gspawn-win32.c:300 glib/gspawn.c:1480
#, c-format
msgid "Failed to create pipe for communicating with child process (%s)"
msgstr "無法建立管道來和副進程溝通 (%s)"
#: glib/gspawn-win32.c:339 glib/gspawn-win32.c:347 glib/gspawn.c:1139
#, c-format
msgid "Failed to read from child pipe (%s)"
msgstr "無法從管道讀取資料 (%s)"
#: glib/gspawn-win32.c:370 glib/gspawn.c:1346
#, c-format
msgid "Failed to change to directory '%s' (%s)"
msgstr "無法進入目錄‘%s(%s)"
#: glib/gspawn-win32.c:376 glib/gspawn-win32.c:495
#, c-format
msgid "Failed to execute child process (%s)"
msgstr "無法執行副進程 (%s)"
#: glib/gspawn-win32.c:445
#, c-format
msgid "Invalid program name: %s"
msgstr "程式名稱無效:%s"
#: glib/gspawn-win32.c:455 glib/gspawn-win32.c:723 glib/gspawn-win32.c:1279
#, c-format
msgid "Invalid string in argument vector at %d: %s"
msgstr "第 %d 個引數中含無效的字串:%s"
#: glib/gspawn-win32.c:466 glib/gspawn-win32.c:738 glib/gspawn-win32.c:1312
#, c-format
msgid "Invalid string in environment: %s"
msgstr "環境變數中的字串無效:%s"
#: glib/gspawn-win32.c:719 glib/gspawn-win32.c:1260
#, c-format
msgid "Invalid working directory: %s"
msgstr "無效的工作目錄:%s"
#: glib/gspawn-win32.c:784
#, c-format
msgid "Failed to execute helper program (%s)"
msgstr "無法執行協助程式 (%s)"
#: glib/gspawn-win32.c:998
msgid ""
"Unexpected error in g_io_channel_win32_poll() reading data from a child "
"process"
msgstr "當 g_io_channel_win32_poll() 從副進程讀取資料時發生無法預計的錯誤"
#: glib/gspawn.c:190
#, c-format
msgid "Failed to read data from child process (%s)"
msgstr "無法從副進程讀取資料 (%s)"
#: glib/gspawn.c:329
#, c-format
msgid "Unexpected error in select() reading data from a child process (%s)"
msgstr "當 select() 從子程序讀取資料時發生未預期的錯誤 (%s)"
#: glib/gspawn.c:414
#, c-format
msgid "Unexpected error in waitpid() (%s)"
msgstr "waitpid() 發生未預期的錯誤 (%s)"
#: glib/gspawn.c:1206
#, c-format
msgid "Failed to fork (%s)"
msgstr "無法衍生進程 (%s)"
#: glib/gspawn.c:1356
#, c-format
msgid "Failed to execute child process \"%s\" (%s)"
msgstr "無法執行副進程“%s”(%s)"
#: glib/gspawn.c:1366
#, c-format
msgid "Failed to redirect output or input of child process (%s)"
msgstr "無法將副進程的輸出或輸入重新導向 (%s)"
#: glib/gspawn.c:1375
#, c-format
msgid "Failed to fork child process (%s)"
msgstr "無法衍生副進程 (%s)"
#: glib/gspawn.c:1383
#, c-format
msgid "Unknown error executing child process \"%s\""
msgstr "執行副進程“%s”時發生不明的錯誤"
#: glib/gspawn.c:1407
#, c-format
msgid "Failed to read enough data from child pid pipe (%s)"
msgstr "無法從 child pid pipe 讀取足夠的資料 (%s)"
#: glib/gutf8.c:1038
msgid "Character out of range for UTF-8"
msgstr "字符不在 UTF-8 範圍之內"
#: glib/gutf8.c:1132 glib/gutf8.c:1141 glib/gutf8.c:1273 glib/gutf8.c:1282
#: glib/gutf8.c:1423 glib/gutf8.c:1519
msgid "Invalid sequence in conversion input"
msgstr "轉換輸入資料時出現無效的字符次序"
#: glib/gutf8.c:1434 glib/gutf8.c:1530
msgid "Character out of range for UTF-16"
msgstr "字符不在 UTF-16 範圍之內"
#: glib/goption.c:755
msgid "Usage:"
msgstr "用法:"
#: glib/goption.c:755
msgid "[OPTION...]"
msgstr "[選項...]"
#: glib/goption.c:861
msgid "Help Options:"
msgstr "說明選項:"
#: glib/goption.c:862
msgid "Show help options"
msgstr "顯示說明的選項"
#: glib/goption.c:868
msgid "Show all help options"
msgstr "顯示所有的說明選項"
#: glib/goption.c:930
msgid "Application Options:"
msgstr "應用程式選項:"
#: glib/goption.c:992 glib/goption.c:1062
#, c-format
msgid "Cannot parse integer value '%s' for %s"
msgstr "無法給 %2$s 解析整數值‘%1$s"
#: glib/goption.c:1002 glib/goption.c:1070
#, c-format
msgid "Integer value '%s' for %s out of range"
msgstr "%2$s 的整數值‘%1$s超出範圍"
#: glib/goption.c:1027
#, c-format
msgid "Cannot parse double value '%s' for %s"
msgstr "無法給 %2$s 解析雙精度浮點數‘%1$s"
#: glib/goption.c:1035
#, c-format
msgid "Double value '%s' for %s out of range"
msgstr "%2$s 的雙精度浮點數‘%1$s超出範圍"
#: glib/goption.c:1298 glib/goption.c:1377
#, c-format
msgid "Error parsing option %s"
msgstr "解析 %s 選項時發生錯誤"
#: glib/goption.c:1408 glib/goption.c:1522
#, c-format
msgid "Missing argument for %s"
msgstr "缺少 %s 的參數"
#: glib/goption.c:1917
#, c-format
msgid "Unknown option %s"
msgstr "未知的選項 %s"
#: glib/gkeyfile.c:362
msgid "Valid key file could not be found in search dirs"
msgstr "在資料目錄中找不到有效的設定鍵檔案"
#: glib/gkeyfile.c:397
msgid "Not a regular file"
msgstr "不是正規的檔案"
#: glib/gkeyfile.c:405
msgid "File is empty"
msgstr "檔案是空白的"
#: glib/gkeyfile.c:765
#, c-format
msgid ""
"Key file contains line '%s' which is not a key-value pair, group, or comment"
msgstr "設定鍵檔案中‘%s行並非設定鍵值配對、羣組或註解"
#: glib/gkeyfile.c:825
#, c-format
msgid "Invalid group name: %s"
msgstr "無效的羣組名稱:%s"
#: glib/gkeyfile.c:847
msgid "Key file does not start with a group"
msgstr "設定鍵檔案並非以羣組開頭"
#: glib/gkeyfile.c:873
#, c-format
msgid "Invalid key name: %s"
msgstr "無效的設定鍵名稱:%s"
#: glib/gkeyfile.c:900
#, c-format
msgid "Key file contains unsupported encoding '%s'"
msgstr "設定鍵檔案包含不支援的編碼‘%s"
#: glib/gkeyfile.c:1116 glib/gkeyfile.c:1278 glib/gkeyfile.c:2507
#: glib/gkeyfile.c:2573 glib/gkeyfile.c:2708 glib/gkeyfile.c:2841
#: glib/gkeyfile.c:2994 glib/gkeyfile.c:3181 glib/gkeyfile.c:3242
#, c-format
msgid "Key file does not have group '%s'"
msgstr "設定鍵檔案沒有羣組‘%s"
#: glib/gkeyfile.c:1290
#, c-format
msgid "Key file does not have key '%s'"
msgstr "設定鍵檔案沒有設定鍵‘%s"
#: glib/gkeyfile.c:1397 glib/gkeyfile.c:1512
#, c-format
msgid "Key file contains key '%s' with value '%s' which is not UTF-8"
msgstr "設定鍵檔案包含的設定鍵‘%s數值為%s並非 UTF-8"
#: glib/gkeyfile.c:1417 glib/gkeyfile.c:1911
#, c-format
msgid "Key file contains key '%s' which has value that cannot be interpreted."
msgstr "設定鍵檔案包含的設定鍵‘%s的數值無法解譯。"
#: glib/gkeyfile.c:1532
#, c-format
msgid ""
"Key file contains key '%s' which has a value that cannot be interpreted."
msgstr "設定鍵檔案包含的設定鍵「%s」的數值無法解譯。"
#: glib/gkeyfile.c:2126 glib/gkeyfile.c:2338
#, c-format
msgid ""
"Key file contains key '%s' in group '%s' which has value that cannot be "
"interpreted."
msgstr "設定鍵檔案包含的羣組‘%2$s中設定鍵%1$s數值無法解譯"
#: glib/gkeyfile.c:2522 glib/gkeyfile.c:2723 glib/gkeyfile.c:3253
#, c-format
msgid "Key file does not have key '%s' in group '%s'"
msgstr "設定鍵檔案的羣組‘%2$s中沒有設定鍵%1$s"
#: glib/gkeyfile.c:3487
msgid "Key file contains escape character at end of line"
msgstr "設定鍵檔案在行尾包含跳出字符"
#: glib/gkeyfile.c:3509
#, c-format
msgid "Key file contains invalid escape sequence '%s'"
msgstr "設定鍵檔案含有不正確的「跳出字符」‘%s"
#: glib/gkeyfile.c:3651
#, c-format
msgid "Value '%s' cannot be interpreted as a number."
msgstr "數值‘%s不能被解譯為數字。"
#: glib/gkeyfile.c:3665
#, c-format
msgid "Integer value '%s' out of range"
msgstr "整數值‘%s超出範圍"
#: glib/gkeyfile.c:3698
#, c-format
msgid "Value '%s' cannot be interpreted as a float number."
msgstr "數值‘%s不能被解譯為浮點數。"
#: glib/gkeyfile.c:3722
#, c-format
msgid "Value '%s' cannot be interpreted as a boolean."
msgstr "數值‘%s不能被解譯為邏輯值。"
#: gio/gbufferedinputstream.c:417 gio/gbufferedinputstream.c:498
#: gio/ginputstream.c:190 gio/ginputstream.c:322 gio/ginputstream.c:563
#: gio/ginputstream.c:688 gio/goutputstream.c:201 gio/goutputstream.c:656
#, c-format
msgid "Too large count value passed to %s"
msgstr "傳給 %s 的計數值太大"
#: gio/gbufferedinputstream.c:885 gio/ginputstream.c:898 gio/giostream.c:309
#: gio/goutputstream.c:1085
msgid "Stream is already closed"
msgstr "串流已經關閉"
#: gio/gcancellable.c:420 gio/glocalfile.c:2098 gio/gsimpleasyncresult.c:650
#: gio/gsimpleasyncresult.c:676
msgid "Operation was cancelled"
msgstr "操作已被取消"
#: gio/gcontenttype.c:180
msgid "Unknown type"
msgstr "不明的類型"
#: gio/gcontenttype.c:181
#, c-format
msgid "%s filetype"
msgstr "%s 檔案類型"
#: gio/gcontenttype.c:678
#, c-format
msgid "%s type"
msgstr "%s 類型"
#: gio/gdatainputstream.c:313
msgid "Unexpected early end-of-stream"
msgstr "未預期的串流過早結束"
#: gio/gdesktopappinfo.c:463 gio/gwin32appinfo.c:222
msgid "Unnamed"
msgstr "未命名的"
#: gio/gdesktopappinfo.c:710
msgid "Desktop file didn't specify Exec field"
msgstr "桌面(Desktop)檔案未指定 Exec 欄位"
#: gio/gdesktopappinfo.c:890
msgid "Unable to find terminal required for application"
msgstr "無法找到應用程式要求的終端機"
#: gio/gdesktopappinfo.c:1098
#, c-format
msgid "Can't create user application configuration folder %s: %s"
msgstr "不能建立使用者應用程式組態資料夾 %s%s"
#: gio/gdesktopappinfo.c:1102
#, c-format
msgid "Can't create user MIME configuration folder %s: %s"
msgstr "不能建立使用者 MIME 組態資料夾 %s%s"
#: gio/gdesktopappinfo.c:1506
#, c-format
msgid "Can't create user desktop file %s"
msgstr "不能建立使用者桌面檔案 %s"
#: gio/gdesktopappinfo.c:1618
#, c-format
msgid "Custom definition for %s"
msgstr "自選 %s 的定義"
#: gio/gdrive.c:409
msgid "drive doesn't implement eject"
msgstr "裝置無法實作退出功能(eject)"
#. Translators: This is an error
#. * message for drive objects that
#. * don't implement any of eject or eject_with_operation.
#: gio/gdrive.c:489
msgid "drive doesn't implement eject or eject_with_operation"
msgstr "裝置無法實作退出功能(eject) 或 eject_with_operation"
#: gio/gdrive.c:566
msgid "drive doesn't implement polling for media"
msgstr "裝置無法實作媒體的輪詢"
#: gio/gdrive.c:771
msgid "drive doesn't implement start"
msgstr "裝置無法實作啟動功能(start)"
#: gio/gdrive.c:873
msgid "drive doesn't implement stop"
msgstr "裝置無法實作停止功能(stop)"
#: gio/gemblem.c:325
#, c-format
msgid "Can't handle version %d of GEmblem encoding"
msgstr "不能處理版本為 %d 的 GEmblem 編碼"
#: gio/gemblem.c:335
#, c-format
msgid "Malformed number of tokens (%d) in GEmblem encoding"
msgstr "GEmblem 編碼中記號 (%d) 的數量格式不正確"
#: gio/gemblemedicon.c:296
#, c-format
msgid "Can't handle version %d of GEmblemedIcon encoding"
msgstr "不能處理版本為 %d 的 GEmblemedIcon 編碼"
#: gio/gemblemedicon.c:306
#, c-format
msgid "Malformed number of tokens (%d) in GEmblemedIcon encoding"
msgstr "GEmblemedIcon 編碼中記號 (%d) 的數量格式不正確"
#: gio/gemblemedicon.c:329
msgid "Expected a GEmblem for GEmblemedIcon"
msgstr "預期為 GEmblemedIcon 的 GEmblem"
#: gio/gfile.c:861 gio/gfile.c:1091 gio/gfile.c:1226 gio/gfile.c:1462
#: gio/gfile.c:1516 gio/gfile.c:1573 gio/gfile.c:1656 gio/gfile.c:1711
#: gio/gfile.c:1771 gio/gfile.c:1825 gio/gfile.c:3150 gio/gfile.c:3204
#: gio/gfile.c:3335 gio/gfile.c:3375 gio/gfile.c:3702 gio/gfile.c:4104
#: gio/gfile.c:4190 gio/gfile.c:4279 gio/gfile.c:4377 gio/gfile.c:4464
#: gio/gfile.c:4557 gio/gfile.c:4887 gio/gfile.c:5167 gio/gfile.c:5236
#: gio/gfile.c:6824 gio/gfile.c:6914 gio/gfile.c:7000
#: gio/win32/gwinhttpfile.c:441
msgid "Operation not supported"
msgstr "不支援的操作"
#. Translators: This is an error message when trying to find the
#. * enclosing (user visible) mount of a file, but none exists.
#. Translators: This is an error message when trying to
#. * find the enclosing (user visible) mount of a file, but
#. * none exists.
#. Translators: This is an error message when trying to find
#. * the enclosing (user visible) mount of a file, but none
#. * exists.
#: gio/gfile.c:1347 gio/glocalfile.c:1065 gio/glocalfile.c:1076
#: gio/glocalfile.c:1089
msgid "Containing mount does not exist"
msgstr "包含了不存在的掛載點"
#: gio/gfile.c:2399 gio/glocalfile.c:2250
msgid "Can't copy over directory"
msgstr "不能複製整個目錄"
#: gio/gfile.c:2459
msgid "Can't copy directory over directory"
msgstr "不能將目錄複製到目錄上"
#: gio/gfile.c:2467 gio/glocalfile.c:2259
msgid "Target file exists"
msgstr "目標檔案已存在"
#: gio/gfile.c:2485
msgid "Can't recursively copy directory"
msgstr "不能遞廻複製目錄"
#: gio/gfile.c:2784
msgid "Can't copy special file"
msgstr "不能複製特殊的檔案"
#: gio/gfile.c:3325
msgid "Invalid symlink value given"
msgstr "提供了無效的符號連結值"
#: gio/gfile.c:3418
msgid "Trash not supported"
msgstr "不支援回收筒"
#: gio/gfile.c:3467
#, c-format
msgid "File names cannot contain '%c'"
msgstr "檔案名稱不能包含「%c」"
#: gio/gfile.c:5884 gio/gvolume.c:376
msgid "volume doesn't implement mount"
msgstr "儲存區尚未實作掛載功能"
#: gio/gfile.c:5992
msgid "No application is registered as handling this file"
msgstr "沒有應用程式註冊為用以處理這個檔案"
#: gio/gfileenumerator.c:206
msgid "Enumerator is closed"
msgstr "檔案列舉器(enumerator)已關閉"
#: gio/gfileenumerator.c:213 gio/gfileenumerator.c:272
#: gio/gfileenumerator.c:372 gio/gfileenumerator.c:481
msgid "File enumerator has outstanding operation"
msgstr "檔案列舉器(enumerator)有異常操作"
#: gio/gfileenumerator.c:362 gio/gfileenumerator.c:471
msgid "File enumerator is already closed"
msgstr "檔案列舉器(enumerator)已經關閉"
#: gio/gfileicon.c:237
#, c-format
msgid "Can't handle version %d of GFileIcon encoding"
msgstr "不能處理版本為 %d 的 GFileIcon 編碼"
#: gio/gfileicon.c:247
msgid "Malformed input data for GFileIcon"
msgstr "給 GFileIcon 的輸入資料格式不良"
#: gio/gfileinputstream.c:155 gio/gfileinputstream.c:422
#: gio/gfileiostream.c:171 gio/gfileoutputstream.c:170
#: gio/gfileoutputstream.c:525
msgid "Stream doesn't support query_info"
msgstr "串流不支援 query_info"
#: gio/gfileinputstream.c:337 gio/gfileiostream.c:389
#: gio/gfileoutputstream.c:383
msgid "Seek not supported on stream"
msgstr "不支援在串流中搜尋"
#: gio/gfileinputstream.c:381
msgid "Truncate not allowed on input stream"
msgstr "在輸入串流中不允許截短(truncate)"
#: gio/gfileiostream.c:465 gio/gfileoutputstream.c:459
msgid "Truncate not supported on stream"
msgstr "在串流中不支援截短(truncate)"
#: gio/gicon.c:324
#, c-format
msgid "Wrong number of tokens (%d)"
msgstr "記號數量 (%d) 錯誤"
#: gio/gicon.c:344
#, c-format
msgid "No type for class name %s"
msgstr "類別名稱 %s 沒有類型"
#: gio/gicon.c:354
#, c-format
msgid "Type %s does not implement the GIcon interface"
msgstr "類型 %s 沒有實作 GIcon 介面"
#: gio/gicon.c:365
#, c-format
msgid "Type %s is not classed"
msgstr "類型 %s 尚未歸類"
#: gio/gicon.c:379
#, c-format
msgid "Malformed version number: %s"
msgstr "格式不良的版本號碼:%s"
#: gio/gicon.c:393
#, c-format
msgid "Type %s does not implement from_tokens() on the GIcon interface"
msgstr "類型 %s 沒有實作 GIcon 介面的 from_tokens()"
#: gio/gicon.c:469
msgid "Can't handle the supplied version the icon encoding"
msgstr "不能處理提供的圖示編碼版本"
#: gio/ginputstream.c:199
msgid "Input stream doesn't implement read"
msgstr "輸入串流尚未實作讀取"
#. Translators: This is an error you get if there is already an
#. * operation running against this stream when you try to start
#. * one
#. Translators: This is an error you get if there is
#. * already an operation running against this stream when
#. * you try to start one
#: gio/ginputstream.c:908 gio/giostream.c:319 gio/goutputstream.c:1095
msgid "Stream has outstanding operation"
msgstr "串流有異常操作"
#: gio/ginetsocketaddress.c:182 gio/ginetsocketaddress.c:199
#: gio/gunixsocketaddress.c:174
msgid "Not enough space for socket address"
msgstr "socket 位址沒有足夠的空間"
#: gio/ginetsocketaddress.c:212
msgid "Unsupported socket address"
msgstr "不支援的 socket 位址"
#: gio/glocaldirectorymonitor.c:295
msgid "Unable to find default local directory monitor type"
msgstr "無法找到預設的本地端目錄監視器類型"
#: gio/glocalfile.c:600 gio/win32/gwinhttpfile.c:424
#, c-format
msgid "Invalid filename %s"
msgstr "無效的檔案名稱 %s"
#: gio/glocalfile.c:973
#, c-format
msgid "Error getting filesystem info: %s"
msgstr "取得檔案系統資訊時發生錯誤:%s"
#: gio/glocalfile.c:1109
msgid "Can't rename root directory"
msgstr "不能重新命名根目錄"
#: gio/glocalfile.c:1129 gio/glocalfile.c:1155
#, c-format
msgid "Error renaming file: %s"
msgstr "重新命名檔案時發生錯誤:%s"
#: gio/glocalfile.c:1138
msgid "Can't rename file, filename already exist"
msgstr "不能重新命名檔案,該檔案名稱已存在"
#: gio/glocalfile.c:1151 gio/glocalfile.c:2127 gio/glocalfile.c:2156
#: gio/glocalfile.c:2312 gio/glocalfileoutputstream.c:550
#: gio/glocalfileoutputstream.c:603 gio/glocalfileoutputstream.c:648
#: gio/glocalfileoutputstream.c:1130
msgid "Invalid filename"
msgstr "無效的檔案名稱"
#: gio/glocalfile.c:1307
#, c-format
msgid "Error opening file: %s"
msgstr "開啓檔案時發生錯誤:%s"
#: gio/glocalfile.c:1317
msgid "Can't open directory"
msgstr "不能開啟目錄"
#: gio/glocalfile.c:1442
#, c-format
msgid "Error removing file: %s"
msgstr "移除檔案時發生錯誤:%s"
#: gio/glocalfile.c:1811
#, c-format
msgid "Error trashing file: %s"
msgstr "移動檔案至回收筒時發生錯誤:%s"
#: gio/glocalfile.c:1834
#, c-format
msgid "Unable to create trash dir %s: %s"
msgstr "無法建立回收筒目錄 %s%s"
#: gio/glocalfile.c:1855
msgid "Unable to find toplevel directory for trash"
msgstr "無法找到回收筒的頂端層級目錄"
#: gio/glocalfile.c:1934 gio/glocalfile.c:1954
msgid "Unable to find or create trash directory"
msgstr "無法找到或建立回收筒目錄"
#: gio/glocalfile.c:1988
#, c-format
msgid "Unable to create trashing info file: %s"
msgstr "無法建立回收筒資訊檔案:%s"
#: gio/glocalfile.c:2017 gio/glocalfile.c:2022 gio/glocalfile.c:2097
#: gio/glocalfile.c:2104
#, c-format
msgid "Unable to trash file: %s"
msgstr "無法將檔案移至回收筒:%s"
#: gio/glocalfile.c:2131
#, c-format
msgid "Error creating directory: %s"
msgstr "建立目錄發生錯誤:%s"
#: gio/glocalfile.c:2160
#, c-format
msgid "Error making symbolic link: %s"
msgstr "建立符號連結時發生錯誤:%s"
#: gio/glocalfile.c:2222 gio/glocalfile.c:2316
#, c-format
msgid "Error moving file: %s"
msgstr "移動檔案時發生錯誤:%s"
#: gio/glocalfile.c:2245
msgid "Can't move directory over directory"
msgstr "不能將目錄移動至目錄上"
#: gio/glocalfile.c:2272 gio/glocalfileoutputstream.c:928
#: gio/glocalfileoutputstream.c:942 gio/glocalfileoutputstream.c:957
#: gio/glocalfileoutputstream.c:973 gio/glocalfileoutputstream.c:987
msgid "Backup file creation failed"
msgstr "建立備份檔案失敗"
#: gio/glocalfile.c:2291
#, c-format
msgid "Error removing target file: %s"
msgstr "移除目標檔案時發生錯誤:%s"
#: gio/glocalfile.c:2305
msgid "Move between mounts not supported"
msgstr "不支援在掛載點之間移動"
#: gio/glocalfileinfo.c:721
msgid "Attribute value must be non-NULL"
msgstr "屬性數值必須為非-NULL"
#: gio/glocalfileinfo.c:728
msgid "Invalid attribute type (string expected)"
msgstr "無效的屬性類型(應為字串值)"
#: gio/glocalfileinfo.c:735
msgid "Invalid extended attribute name"
msgstr "無效的延伸屬性名稱"
#: gio/glocalfileinfo.c:775
#, c-format
msgid "Error setting extended attribute '%s': %s"
msgstr "設定延伸屬性「%s」時發生錯誤%s"
#: gio/glocalfileinfo.c:1481 gio/glocalfileoutputstream.c:812
#, c-format
msgid "Error stating file '%s': %s"
msgstr "取得檔案「%s」狀態時發生錯誤%s"
#: gio/glocalfileinfo.c:1552
msgid " (invalid encoding)"
msgstr "(無效的編碼)"
#: gio/glocalfileinfo.c:1759
#, c-format
msgid "Error stating file descriptor: %s"
msgstr "取得檔案描述狀態時發生錯誤:%s"
#: gio/glocalfileinfo.c:1804
msgid "Invalid attribute type (uint32 expected)"
msgstr "無效的屬性類型(應為 uint32 值)"
#: gio/glocalfileinfo.c:1822
msgid "Invalid attribute type (uint64 expected)"
msgstr "無效的屬性類型(應為 uint64 值)"
#: gio/glocalfileinfo.c:1841 gio/glocalfileinfo.c:1860
msgid "Invalid attribute type (byte string expected)"
msgstr "無效的屬性類型(應為 byte string 值)"
#: gio/glocalfileinfo.c:1895
#, fuzzy
msgid "Cannot set permissions on symlinks"
msgstr "設定權限時發生錯誤:%s"
#: gio/glocalfileinfo.c:1911
#, c-format
msgid "Error setting permissions: %s"
msgstr "設定權限時發生錯誤:%s"
#: gio/glocalfileinfo.c:1962
#, c-format
msgid "Error setting owner: %s"
msgstr "設定擁有者時發生錯誤:%s"
#: gio/glocalfileinfo.c:1985
msgid "symlink must be non-NULL"
msgstr "符號連結必須為非-NULL"
#: gio/glocalfileinfo.c:1995 gio/glocalfileinfo.c:2014
#: gio/glocalfileinfo.c:2025
#, c-format
msgid "Error setting symlink: %s"
msgstr "設定符號連結時發生錯誤:%s"
#: gio/glocalfileinfo.c:2004
msgid "Error setting symlink: file is not a symlink"
msgstr "設定符號連結時發生錯誤:檔案不是符號連結"
#: gio/glocalfileinfo.c:2130
#, c-format
msgid "Error setting modification or access time: %s"
msgstr "設定修改或存取時刻時發生錯誤:%s"
#: gio/glocalfileinfo.c:2153
msgid "SELinux context must be non-NULL"
msgstr "SELinux 關聯必須為非-NULL"
#: gio/glocalfileinfo.c:2168
#, c-format
msgid "Error setting SELinux context: %s"
msgstr "設定 SELinux 關聯時發生錯誤:%s"
#: gio/glocalfileinfo.c:2175
msgid "SELinux is not enabled on this system"
msgstr "SELinux 在這個系統上並未啟用"
#: gio/glocalfileinfo.c:2267
#, c-format
msgid "Setting attribute %s not supported"
msgstr "不支援設定屬性 %s"
#: gio/glocalfileinputstream.c:169 gio/glocalfileoutputstream.c:701
#, c-format
msgid "Error reading from file: %s"
msgstr "從檔案讀取時發生錯誤:%s"
#: gio/glocalfileinputstream.c:200 gio/glocalfileinputstream.c:212
#: gio/glocalfileinputstream.c:324 gio/glocalfileoutputstream.c:449
#: gio/glocalfileoutputstream.c:1005
#, c-format
msgid "Error seeking in file: %s"
msgstr "在檔案中搜尋時發生錯誤:%s"
#: gio/glocalfileinputstream.c:245 gio/glocalfileoutputstream.c:235
#: gio/glocalfileoutputstream.c:330
#, c-format
msgid "Error closing file: %s"
msgstr "關閉檔案時發生錯誤:%s"
#: gio/glocalfilemonitor.c:198
msgid "Unable to find default local file monitor type"
msgstr "無法找到預設的本地端檔案監視器類型"
#: gio/glocalfileoutputstream.c:181 gio/glocalfileoutputstream.c:214
#: gio/glocalfileoutputstream.c:722
#, c-format
msgid "Error writing to file: %s"
msgstr "寫入至檔案時發生錯誤:%s"
#: gio/glocalfileoutputstream.c:262
#, c-format
msgid "Error removing old backup link: %s"
msgstr "移除舊備份連結時發生錯誤:%s"
#: gio/glocalfileoutputstream.c:276 gio/glocalfileoutputstream.c:289
#, c-format
msgid "Error creating backup copy: %s"
msgstr "建立備份複本時發生錯誤:%s"
#: gio/glocalfileoutputstream.c:307
#, c-format
msgid "Error renaming temporary file: %s"
msgstr "重新命名暫存檔案時發生錯誤:%s"
#: gio/glocalfileoutputstream.c:495 gio/glocalfileoutputstream.c:1056
#, c-format
msgid "Error truncating file: %s"
msgstr "截短檔案時發生錯誤:%s"
#: gio/glocalfileoutputstream.c:556 gio/glocalfileoutputstream.c:609
#: gio/glocalfileoutputstream.c:654 gio/glocalfileoutputstream.c:794
#: gio/glocalfileoutputstream.c:1037 gio/glocalfileoutputstream.c:1136
#, c-format
msgid "Error opening file '%s': %s"
msgstr "開啟檔案「%s」時發生錯誤%s"
#: gio/glocalfileoutputstream.c:825
msgid "Target file is a directory"
msgstr "目標檔案是一個目錄"
#: gio/glocalfileoutputstream.c:830
msgid "Target file is not a regular file"
msgstr "目標檔案不是正規的檔案"
#: gio/glocalfileoutputstream.c:842
msgid "The file was externally modified"
msgstr "該檔案已被外部程式修改過"
#: gio/glocalfileoutputstream.c:1021
#, c-format
msgid "Error removing old file: %s"
msgstr "移除舊檔案時發生錯誤:%s"
#: gio/gmemoryinputstream.c:487 gio/gmemoryoutputstream.c:553
msgid "Invalid GSeekType supplied"
msgstr "提供了無效的 GSeek 類型"
#: gio/gmemoryinputstream.c:497 gio/gmemoryoutputstream.c:563
msgid "Invalid seek request"
msgstr "無效的搜尋要求"
#: gio/gmemoryinputstream.c:521
msgid "Cannot truncate GMemoryInputStream"
msgstr "不能截短 GMemoryInputStream"
#: gio/gmemoryoutputstream.c:290
msgid "Reached maximum data array limit"
msgstr "已達最大資料陣列上限"
#: gio/gmemoryoutputstream.c:325
msgid "Memory output stream not resizable"
msgstr "記憶體輸出串流不能改變大小"
#: gio/gmemoryoutputstream.c:341
msgid "Failed to resize memory output stream"
msgstr "改變記憶體輸出串流的大小失敗"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement unmount.
#: gio/gmount.c:378
msgid "mount doesn't implement unmount"
msgstr "掛載點尚未實作卸載"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement eject.
#: gio/gmount.c:457
msgid "mount doesn't implement eject"
msgstr "掛載點尚未實作退出"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement any of unmount or unmount_with_operation.
#: gio/gmount.c:537
msgid "mount doesn't implement unmount or unmount_with_operation"
msgstr "掛載點尚未實作卸載(umount)或 umount_with_operation"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement any of eject or eject_with_operation.
#: gio/gmount.c:624
msgid "mount doesn't implement eject or eject_with_operation"
msgstr "掛載點尚未實作退出(eject) 或 eject_with_operation"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement remount.
#: gio/gmount.c:713
msgid "mount doesn't implement remount"
msgstr "掛載點尚未實作重新掛載"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement content type guessing.
#: gio/gmount.c:797
msgid "mount doesn't implement content type guessing"
msgstr "掛載點尚未實作內容類型預測"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement content type guessing.
#: gio/gmount.c:886
msgid "mount doesn't implement synchronous content type guessing"
msgstr "掛載點尚未實作同步內容類型預測"
#: gio/gnetworkaddress.c:295
#, c-format
msgid "Hostname '%s' contains '[' but not ']'"
msgstr "主機名稱「%s」含有 '[' but not ']'"
#: gio/goutputstream.c:210 gio/goutputstream.c:411
msgid "Output stream doesn't implement write"
msgstr "輸出串流尚未實作寫入"
#: gio/goutputstream.c:371 gio/goutputstream.c:780
msgid "Source stream is already closed"
msgstr "來源串流已經關閉"
#: gio/gresolver.c:736
#, c-format
msgid "Error resolving '%s': %s"
msgstr "解析「%s」時發生錯誤%s"
#: gio/gresolver.c:786
#, c-format
msgid "Error reverse-resolving '%s': %s"
msgstr "反向解析「%s」時發生錯誤%s"
#: gio/gresolver.c:821 gio/gresolver.c:899
#, c-format
msgid "No service record for '%s'"
msgstr "沒有「%s」的服務紀錄"
#: gio/gresolver.c:826 gio/gresolver.c:904
#, c-format
msgid "Temporarily unable to resolve '%s'"
msgstr "暫時無法解析「%s」"
#: gio/gresolver.c:831 gio/gresolver.c:909
#, c-format
msgid "Error resolving '%s'"
msgstr "解析「%s」時發生錯誤"
#: gio/gsocket.c:277
msgid "Invalid socket, not initialized"
msgstr "無效的 socket尚未初始化"
#: gio/gsocket.c:284
#, c-format
msgid "Invalid socket, initialization failed due to: %s"
msgstr "無效的 socket初始化失敗原因為%s"
#: gio/gsocket.c:292
msgid "Socket is already closed"
msgstr "Socket 已經關閉"
#: gio/gsocket.c:405
#, c-format
msgid "creating GSocket from fd: %s"
msgstr "正在從 fd 建立 GSocket%s"
#: gio/gsocket.c:439 gio/gsocket.c:453 gio/gsocket.c:1911
#, c-format
msgid "Unable to create socket: %s"
msgstr "無法建立 socket%s"
#: gio/gsocket.c:439
msgid "Unknown protocol was specified"
msgstr "指定了不明的通訊協定"
#: gio/gsocket.c:758
msgid "Cancellable initialization not supported"
msgstr "不支援可取消的初始化"
#: gio/gsocket.c:1112
#, c-format
msgid "could not get local address: %s"
msgstr "無法取得本地端位址:%s"
#: gio/gsocket.c:1145
#, c-format
msgid "could not get remote address: %s"
msgstr "無法取得遠端位址:%s"
#: gio/gsocket.c:1203
#, c-format
msgid "could not listen: %s"
msgstr "無法聽取:%s"
#: gio/gsocket.c:1277
#, c-format
msgid "Error binding to address: %s"
msgstr "綁定至位址時發生錯誤:%s"
#: gio/gsocket.c:1397
#, c-format
msgid "Error accepting connection: %s"
msgstr "接受連線時發生錯誤:%s"
#: gio/gsocket.c:1510
msgid "Error connecting: "
msgstr "連線錯誤:"
#: gio/gsocket.c:1514
msgid "Connection in progress"
msgstr "連線進行中"
#: gio/gsocket.c:1519
#, c-format
msgid "Error connecting: %s"
msgstr "連線錯誤:%s"
#: gio/gsocket.c:1559
#, c-format
msgid "Unable to get pending error: %s"
msgstr "無法取得未處理的錯誤:%s"
#: gio/gsocket.c:1655
#, c-format
msgid "Error receiving data: %s"
msgstr "接收資料時發生錯誤:%s"
#: gio/gsocket.c:1798
#, c-format
msgid "Error sending data: %s"
msgstr "傳送資料時發生錯誤:%s"
#: gio/gsocket.c:1990
#, c-format
msgid "Error closing socket: %s"
msgstr "關閉 socket 時發生錯誤:%s"
#: gio/gsocket.c:2475
#, c-format
msgid "Waiting for socket condition: %s"
msgstr "等候 socket 情況:%s"
#: gio/gsocket.c:2709 gio/gsocket.c:2790
#, c-format
msgid "Error sending message: %s"
msgstr "傳送訊息時發生錯誤:%s"
#: gio/gsocket.c:2734
msgid "GSocketControlMessage not supported on windows"
msgstr "視窗不支援 GSocketControlMessage"
#: gio/gsocket.c:2992 gio/gsocket.c:3131
#, c-format
msgid "Error receiving message: %s"
msgstr "取回郵件發生錯誤:%s"
#: gio/gsocketclient.c:521 gio/gsocketclient.c:770
msgid "Unknown error on connect"
msgstr "連線時有不明的錯誤"
#: gio/gsocketlistener.c:192
msgid "Listener is already closed"
msgstr "聽取程式已經關閉"
#: gio/gsocketlistener.c:233
msgid "Added socket is closed"
msgstr "加入的 socket 已經關閉"
#: gio/gthemedicon.c:499
#, c-format
msgid "Can't handle version %d of GThemedIcon encoding"
msgstr "不能處理版本為 %d 的 GThemedIcon 編碼"
#: gio/gunixconnection.c:151
#, c-format
msgid "Expecting 1 control message, got %d"
msgstr "預期有 1 個控制訊息,卻收到 %d"
#: gio/gunixconnection.c:164
msgid "Unexpected type of ancillary data"
msgstr "輔助資料的未預期類型"
#: gio/gunixconnection.c:182
#, c-format
msgid "Expecting one fd, but got %d\n"
msgstr "預期有 1 個 fd卻收到 %d\n"
#: gio/gunixconnection.c:198
msgid "Received invalid fd"
msgstr "收到無效的 fd"
#: gio/gunixinputstream.c:358 gio/gunixinputstream.c:378
#: gio/gunixinputstream.c:456 gio/gunixoutputstream.c:443
#, c-format
msgid "Error reading from unix: %s"
msgstr "從 unix 讀取時發生錯誤:%s"
#: gio/gunixinputstream.c:411 gio/gunixinputstream.c:593
#: gio/gunixoutputstream.c:398 gio/gunixoutputstream.c:549
#, c-format
msgid "Error closing unix: %s"
msgstr "關閉 unix 時發生錯誤:%s"
#: gio/gunixmounts.c:1846 gio/gunixmounts.c:1883
msgid "Filesystem root"
msgstr "根檔案系統"
#: gio/gunixoutputstream.c:344 gio/gunixoutputstream.c:365
#, c-format
msgid "Error writing to unix: %s"
msgstr "寫入至 unix 時發生錯誤:%s"
#: gio/gunixsocketaddress.c:182
msgid "Abstract unix domain socket addresses not supported on this system"
msgstr "這個系統不支授抽象 unix 網域 socket 位址"
#: gio/gvolume.c:452
msgid "volume doesn't implement eject"
msgstr "儲存區尚未實作退出(eject)"
#. Translators: This is an error
#. * message for volume objects that
#. * don't implement any of eject or eject_with_operation.
#: gio/gvolume.c:531
msgid "volume doesn't implement eject or eject_with_operation"
msgstr "儲存區尚未實作退出(eject) 或 eject_with_operation"
#: gio/gwin32appinfo.c:277
msgid "Can't find application"
msgstr "找不到應用程式"
#: gio/gwin32appinfo.c:300
#, c-format
msgid "Error launching application: %s"
msgstr "執行應用程式時發生錯誤:%s"
#: gio/gwin32appinfo.c:336
msgid "URIs not supported"
msgstr "不支援 URIs"
#: gio/gwin32appinfo.c:358
msgid "association changes not supported on win32"
msgstr "關聯更改在 win32 上不支援"
#: gio/gwin32appinfo.c:370
msgid "Association creation not supported on win32"
msgstr "關聯建立在 win32 上不支援"
#: tests/gio-ls.c:27
msgid "do not hide entries"
msgstr "不要隱藏項目"
#: tests/gio-ls.c:29
msgid "use a long listing format"
msgstr "使用長式表列格式"
#: tests/gio-ls.c:37
msgid "[FILE...]"
msgstr "[檔案...]"
#~ msgid ""
#~ "Character '%s' is not valid at the start of an entity name; the & "
#~ "character begins an entity; if this ampersand isn't supposed to be an "
#~ "entity, escape it as &amp;"
#~ msgstr ""
#~ "實體名稱不應以‘%s開始應該使用 & 字元;如果這個 & 字元不是作為實體使用,"
#~ "請將 & 轉換為 &amp;"
#~ msgid "Character '%s' is not valid inside an entity name"
#~ msgstr "實體名稱中不應含有字元‘%s"
#~ msgid "Empty character reference; should include a digit such as &#454;"
#~ msgstr "字元參引是空白的;它應該包括數字,像 &#454;"
#~ msgid "Unfinished entity reference"
#~ msgstr "未完成的實體參引"
#~ msgid "Unfinished character reference"
#~ msgstr "未完成的字元參引"
#~ msgid "Invalid UTF-8 encoded text - overlong sequence"
#~ msgstr "無效的 UTF-8 編碼文字 - 序列過長"
#~ msgid "Invalid UTF-8 encoded text - not a start char"
#~ msgstr "無效的 UTF-8 編碼文字 - 非開始字元"
#~ msgid "file"
#~ msgstr "檔案"
#~ msgid "The file containing the icon"
#~ msgstr "含有圖示的檔案"
#~ msgid "name"
#~ msgstr "名稱"
#~ msgid "The name of the icon"
#~ msgstr "圖示的名稱"
#~ msgid "names"
#~ msgstr "名稱"
#~ msgid "An array containing the icon names"
#~ msgstr "包含圖示名稱的陣列"
#~ msgid "use default fallbacks"
#~ msgstr "使用預設的回饋"
#~ msgid ""
#~ "Whether to use default fallbacks found by shortening the name at '-' "
#~ "characters. Ignores names after the first if multiple names are given."
#~ msgstr ""
#~ "是否使用縮短過在「-」字元的名稱找到的預設回饋。如果提供多個名稱則忽略第一"
#~ "個以外的名稱。"
#~ msgid "File descriptor"
#~ msgstr "檔案描述子"
#~ msgid "The file descriptor to read from"
#~ msgstr "要讀取的檔案描述子"
#~ msgid "Close file descriptor"
#~ msgstr "關閉檔案描述子"
#~ msgid "Whether to close the file descriptor when the stream is closed"
#~ msgstr "當串流關閉時是否關閉檔案描述子"
#~ msgid "The file descriptor to write to"
#~ msgstr "要寫入的檔案描述子"
#~ msgid "Error creating backup link: %s"
#~ msgstr "建立備份連結時發生錯誤:%s"