glib/gio/gioenums.h
David Zeuthen 6f070be65b GDBusMessage: Add a way to get/set byte order of a message
Also use this in the test cases to check that serialization to and
from both big and little endian works.

Signed-off-by: David Zeuthen <davidz@redhat.com>
2010-08-04 13:34:14 -04:00

1205 lines
43 KiB
C

/* GIO - GLib Input, Output and Streaming Library
*
* Copyright (C) 2006-2007 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General
* Public License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place, Suite 330,
* Boston, MA 02111-1307, USA.
*
* Author: Alexander Larsson <alexl@redhat.com>
*/
#if !defined (__GIO_GIO_H_INSIDE__) && !defined (GIO_COMPILATION)
#error "Only <gio/gio.h> can be included directly."
#endif
#ifndef __GIO_ENUMS_H__
#define __GIO_ENUMS_H__
#include <glib-object.h>
G_BEGIN_DECLS
/**
* GAppInfoCreateFlags:
* @G_APP_INFO_CREATE_NONE: No flags.
* @G_APP_INFO_CREATE_NEEDS_TERMINAL: Application opens in a terminal window.
* @G_APP_INFO_CREATE_SUPPORTS_URIS: Application supports URI arguments.
* @G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION: Application supports startup notification. Since 2.26
*
* Flags used when creating a #GAppInfo.
*/
typedef enum {
G_APP_INFO_CREATE_NONE = 0, /*< nick=none >*/
G_APP_INFO_CREATE_NEEDS_TERMINAL = (1 << 0), /*< nick=needs-terminal >*/
G_APP_INFO_CREATE_SUPPORTS_URIS = (1 << 1), /*< nick=supports-uris >*/
G_APP_INFO_CREATE_SUPPORTS_STARTUP_NOTIFICATION = (1 << 2) /*< nick=supports-startup-notification >*/
} GAppInfoCreateFlags;
/**
* GConverterFlags:
* @G_CONVERTER_NO_FLAGS: No flags.
* @G_CONVERTER_INPUT_AT_END: At end of input data
* @G_CONVERTER_FLUSH: Flush data
*
* Flags used when calling a g_converter_convert().
*
* Since: 2.24
*/
typedef enum {
G_CONVERTER_NO_FLAGS = 0, /*< nick=none >*/
G_CONVERTER_INPUT_AT_END = (1 << 0), /*< nick=input-at-end >*/
G_CONVERTER_FLUSH = (1 << 1) /*< nick=flush >*/
} GConverterFlags;
/**
* GConverterResult:
* @G_CONVERTER_ERROR: There was an error during conversion.
* @G_CONVERTER_CONVERTED: Some data was consumed or produced
* @G_CONVERTER_FINISHED: The conversion is finished
* @G_CONVERTER_FLUSHED: Flushing is finished
*
* Results returned from g_converter_convert().
*
* Since: 2.24
*/
typedef enum {
G_CONVERTER_ERROR = 0, /*< nick=error >*/
G_CONVERTER_CONVERTED = 1, /*< nick=converted >*/
G_CONVERTER_FINISHED = 2, /*< nick=finished >*/
G_CONVERTER_FLUSHED = 3 /*< nick=flushed >*/
} GConverterResult;
/**
* GDataStreamByteOrder:
* @G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN: Selects Big Endian byte order.
* @G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN: Selects Little Endian byte order.
* @G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN: Selects endianness based on host machine's architecture.
*
* #GDataStreamByteOrder is used to ensure proper endianness of streaming data sources
* across various machine architectures.
*
**/
typedef enum {
G_DATA_STREAM_BYTE_ORDER_BIG_ENDIAN,
G_DATA_STREAM_BYTE_ORDER_LITTLE_ENDIAN,
G_DATA_STREAM_BYTE_ORDER_HOST_ENDIAN
} GDataStreamByteOrder;
/**
* GDataStreamNewlineType:
* @G_DATA_STREAM_NEWLINE_TYPE_LF: Selects "LF" line endings, common on most modern UNIX platforms.
* @G_DATA_STREAM_NEWLINE_TYPE_CR: Selects "CR" line endings.
* @G_DATA_STREAM_NEWLINE_TYPE_CR_LF: Selects "CR, LF" line ending, common on Microsoft Windows.
* @G_DATA_STREAM_NEWLINE_TYPE_ANY: Automatically try to handle any line ending type.
*
* #GDataStreamNewlineType is used when checking for or setting the line endings for a given file.
**/
typedef enum {
G_DATA_STREAM_NEWLINE_TYPE_LF,
G_DATA_STREAM_NEWLINE_TYPE_CR,
G_DATA_STREAM_NEWLINE_TYPE_CR_LF,
G_DATA_STREAM_NEWLINE_TYPE_ANY
} GDataStreamNewlineType;
/**
* GFileAttributeType:
* @G_FILE_ATTRIBUTE_TYPE_INVALID: indicates an invalid or uninitalized type.
* @G_FILE_ATTRIBUTE_TYPE_STRING: a null terminated UTF8 string.
* @G_FILE_ATTRIBUTE_TYPE_BYTE_STRING: a zero terminated string of non-zero bytes.
* @G_FILE_ATTRIBUTE_TYPE_BOOLEAN: a boolean value.
* @G_FILE_ATTRIBUTE_TYPE_UINT32: an unsigned 4-byte/32-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_INT32: a signed 4-byte/32-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_UINT64: an unsigned 8-byte/64-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_INT64: a signed 8-byte/64-bit integer.
* @G_FILE_ATTRIBUTE_TYPE_OBJECT: a #GObject.
* @G_FILE_ATTRIBUTE_TYPE_STRINGV: a %NULL terminated char **. Since 2.22
*
* The data types for file attributes.
**/
typedef enum {
G_FILE_ATTRIBUTE_TYPE_INVALID = 0,
G_FILE_ATTRIBUTE_TYPE_STRING,
G_FILE_ATTRIBUTE_TYPE_BYTE_STRING, /* zero terminated string of non-zero bytes */
G_FILE_ATTRIBUTE_TYPE_BOOLEAN,
G_FILE_ATTRIBUTE_TYPE_UINT32,
G_FILE_ATTRIBUTE_TYPE_INT32,
G_FILE_ATTRIBUTE_TYPE_UINT64,
G_FILE_ATTRIBUTE_TYPE_INT64,
G_FILE_ATTRIBUTE_TYPE_OBJECT,
G_FILE_ATTRIBUTE_TYPE_STRINGV
} GFileAttributeType;
/**
* GFileAttributeInfoFlags:
* @G_FILE_ATTRIBUTE_INFO_NONE: no flags set.
* @G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE: copy the attribute values when the file is copied.
* @G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED: copy the attribute values when the file is moved.
*
* Flags specifying the behaviour of an attribute.
**/
typedef enum {
G_FILE_ATTRIBUTE_INFO_NONE = 0,
G_FILE_ATTRIBUTE_INFO_COPY_WITH_FILE = (1 << 0),
G_FILE_ATTRIBUTE_INFO_COPY_WHEN_MOVED = (1 << 1)
} GFileAttributeInfoFlags;
/**
* GFileAttributeStatus:
* @G_FILE_ATTRIBUTE_STATUS_UNSET: Attribute value is unset (empty).
* @G_FILE_ATTRIBUTE_STATUS_SET: Attribute value is set.
* @G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING: Indicates an error in setting the value.
*
* Used by g_file_set_attributes_from_info() when setting file attributes.
**/
typedef enum {
G_FILE_ATTRIBUTE_STATUS_UNSET = 0,
G_FILE_ATTRIBUTE_STATUS_SET,
G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING
} GFileAttributeStatus;
/**
* GFileQueryInfoFlags:
* @G_FILE_QUERY_INFO_NONE: No flags set.
* @G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS: Don't follow symlinks.
*
* Flags used when querying a #GFileInfo.
*/
typedef enum {
G_FILE_QUERY_INFO_NONE = 0,
G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS = (1 << 0) /*< nick=nofollow-symlinks >*/
} GFileQueryInfoFlags;
/**
* GFileCreateFlags:
* @G_FILE_CREATE_NONE: No flags set.
* @G_FILE_CREATE_PRIVATE: Create a file that can only be
* accessed by the current user.
* @G_FILE_CREATE_REPLACE_DESTINATION: Replace the destination
* as if it didn't exist before. Don't try to keep any old
* permissions, replace instead of following links. This
* is generally useful if you're doing a "copy over"
* rather than a "save new version of" replace operation.
* You can think of it as "unlink destination" before
* writing to it, although the implementation may not
* be exactly like that. Since 2.20
*
* Flags used when an operation may create a file.
*/
typedef enum {
G_FILE_CREATE_NONE = 0,
G_FILE_CREATE_PRIVATE = (1 << 0),
G_FILE_CREATE_REPLACE_DESTINATION = (1 << 1)
} GFileCreateFlags;
/**
* GMountMountFlags:
* @G_MOUNT_MOUNT_NONE: No flags set.
*
* Flags used when mounting a mount.
*/
typedef enum {
G_MOUNT_MOUNT_NONE = 0
} GMountMountFlags;
/**
* GMountUnmountFlags:
* @G_MOUNT_UNMOUNT_NONE: No flags set.
* @G_MOUNT_UNMOUNT_FORCE: Unmount even if there are outstanding
* file operations on the mount.
*
* Flags used when an unmounting a mount.
*/
typedef enum {
G_MOUNT_UNMOUNT_NONE = 0,
G_MOUNT_UNMOUNT_FORCE = (1 << 0)
} GMountUnmountFlags;
/**
* GDriveStartFlags:
* @G_DRIVE_START_NONE: No flags set.
*
* Flags used when starting a drive.
*
* Since: 2.22
*/
typedef enum {
G_DRIVE_START_NONE = 0
} GDriveStartFlags;
/**
* GDriveStartStopType:
* @G_DRIVE_START_STOP_TYPE_UNKNOWN: Unknown or drive doesn't support
* start/stop.
* @G_DRIVE_START_STOP_TYPE_SHUTDOWN: The stop method will physically
* shut down the drive and e.g. power down the port the drive is
* attached to.
* @G_DRIVE_START_STOP_TYPE_NETWORK: The start/stop methods are used
* for connecting/disconnect to the drive over the network.
* @G_DRIVE_START_STOP_TYPE_MULTIDISK: The start/stop methods will
* assemble/disassemble a virtual drive from several physical
* drives.
* @G_DRIVE_START_STOP_TYPE_PASSWORD: The start/stop methods will
* unlock/lock the disk (for example using the ATA <quote>SECURITY
* UNLOCK DEVICE</quote> command)
*
* Enumeration describing how a drive can be started/stopped.
*
* Since: 2.22
*/
typedef enum {
G_DRIVE_START_STOP_TYPE_UNKNOWN,
G_DRIVE_START_STOP_TYPE_SHUTDOWN,
G_DRIVE_START_STOP_TYPE_NETWORK,
G_DRIVE_START_STOP_TYPE_MULTIDISK,
G_DRIVE_START_STOP_TYPE_PASSWORD
} GDriveStartStopType;
/**
* GFileCopyFlags:
* @G_FILE_COPY_NONE: No flags set.
* @G_FILE_COPY_OVERWRITE: Overwrite any existing files
* @G_FILE_COPY_BACKUP: Make a backup of any existing files.
* @G_FILE_COPY_NOFOLLOW_SYMLINKS: Don't follow symlinks.
* @G_FILE_COPY_ALL_METADATA: Copy all file metadata instead of just default set used for copy (see #GFileInfo).
* @G_FILE_COPY_NO_FALLBACK_FOR_MOVE: Don't use copy and delete fallback if native move not supported.
* @G_FILE_COPY_TARGET_DEFAULT_PERMS: Leaves target file with default perms, instead of setting the source file perms.
*
* Flags used when copying or moving files.
*/
typedef enum {
G_FILE_COPY_NONE = 0, /*< nick=none >*/
G_FILE_COPY_OVERWRITE = (1 << 0),
G_FILE_COPY_BACKUP = (1 << 1),
G_FILE_COPY_NOFOLLOW_SYMLINKS = (1 << 2),
G_FILE_COPY_ALL_METADATA = (1 << 3),
G_FILE_COPY_NO_FALLBACK_FOR_MOVE = (1 << 4),
G_FILE_COPY_TARGET_DEFAULT_PERMS = (1 << 5)
} GFileCopyFlags;
/**
* GFileMonitorFlags:
* @G_FILE_MONITOR_NONE: No flags set.
* @G_FILE_MONITOR_WATCH_MOUNTS: Watch for mount events.
* @G_FILE_MONITOR_SEND_MOVED: Pair DELETED and CREATED events caused
* by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED
* event instead (NB: not supported on all backends; the default
* behaviour -without specifying this flag- is to send single DELETED
* and CREATED events).
*
* Flags used to set what a #GFileMonitor will watch for.
*/
typedef enum {
G_FILE_MONITOR_NONE = 0,
G_FILE_MONITOR_WATCH_MOUNTS = (1 << 0),
G_FILE_MONITOR_SEND_MOVED = (1 << 1)
} GFileMonitorFlags;
/**
* GFileType:
* @G_FILE_TYPE_UNKNOWN: File's type is unknown.
* @G_FILE_TYPE_REGULAR: File handle represents a regular file.
* @G_FILE_TYPE_DIRECTORY: File handle represents a directory.
* @G_FILE_TYPE_SYMBOLIC_LINK: File handle represents a symbolic link
* (Unix systems).
* @G_FILE_TYPE_SPECIAL: File is a "special" file, such as a socket, fifo,
* block device, or character device.
* @G_FILE_TYPE_SHORTCUT: File is a shortcut (Windows systems).
* @G_FILE_TYPE_MOUNTABLE: File is a mountable location.
*
* Indicates the file's on-disk type.
**/
typedef enum {
G_FILE_TYPE_UNKNOWN = 0,
G_FILE_TYPE_REGULAR,
G_FILE_TYPE_DIRECTORY,
G_FILE_TYPE_SYMBOLIC_LINK,
G_FILE_TYPE_SPECIAL, /* socket, fifo, blockdev, chardev */
G_FILE_TYPE_SHORTCUT,
G_FILE_TYPE_MOUNTABLE
} GFileType;
/**
* GFilesystemPreviewType:
* @G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS: Only preview files if user has explicitly requested it.
* @G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL: Preview files if user has requested preview of "local" files.
* @G_FILESYSTEM_PREVIEW_TYPE_NEVER: Never preview files.
*
* Indicates a hint from the file system whether files should be
* previewed in a file manager. Returned as the value of the key
* #G_FILE_ATTRIBUTE_FILESYSTEM_USE_PREVIEW.
**/
typedef enum {
G_FILESYSTEM_PREVIEW_TYPE_IF_ALWAYS = 0,
G_FILESYSTEM_PREVIEW_TYPE_IF_LOCAL,
G_FILESYSTEM_PREVIEW_TYPE_NEVER
} GFilesystemPreviewType;
/**
* GFileMonitorEvent:
* @G_FILE_MONITOR_EVENT_CHANGED: a file changed.
* @G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT: a hint that this was probably the last change in a set of changes.
* @G_FILE_MONITOR_EVENT_DELETED: a file was deleted.
* @G_FILE_MONITOR_EVENT_CREATED: a file was created.
* @G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED: a file attribute was changed.
* @G_FILE_MONITOR_EVENT_PRE_UNMOUNT: the file location will soon be unmounted.
* @G_FILE_MONITOR_EVENT_UNMOUNTED: the file location was unmounted.
* @G_FILE_MONITOR_EVENT_MOVED: the file was moved.
*
* Specifies what type of event a monitor event is.
**/
typedef enum {
G_FILE_MONITOR_EVENT_CHANGED,
G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT,
G_FILE_MONITOR_EVENT_DELETED,
G_FILE_MONITOR_EVENT_CREATED,
G_FILE_MONITOR_EVENT_ATTRIBUTE_CHANGED,
G_FILE_MONITOR_EVENT_PRE_UNMOUNT,
G_FILE_MONITOR_EVENT_UNMOUNTED,
G_FILE_MONITOR_EVENT_MOVED
} GFileMonitorEvent;
/* This enumeration conflicts with GIOError in giochannel.h. However,
* that is only used as a return value in some deprecated functions.
* So, we reuse the same prefix for the enumeration values, but call
* the actual enumeration (which is rarely used) GIOErrorEnum.
*/
/**
* GIOErrorEnum:
* @G_IO_ERROR_FAILED: Generic error condition for when any operation fails.
* @G_IO_ERROR_NOT_FOUND: File not found error.
* @G_IO_ERROR_EXISTS: File already exists error.
* @G_IO_ERROR_IS_DIRECTORY: File is a directory error.
* @G_IO_ERROR_NOT_DIRECTORY: File is not a directory.
* @G_IO_ERROR_NOT_EMPTY: File is a directory that isn't empty.
* @G_IO_ERROR_NOT_REGULAR_FILE: File is not a regular file.
* @G_IO_ERROR_NOT_SYMBOLIC_LINK: File is not a symbolic link.
* @G_IO_ERROR_NOT_MOUNTABLE_FILE: File cannot be mounted.
* @G_IO_ERROR_FILENAME_TOO_LONG: Filename is too many characters.
* @G_IO_ERROR_INVALID_FILENAME: Filename is invalid or contains invalid characters.
* @G_IO_ERROR_TOO_MANY_LINKS: File contains too many symbolic links.
* @G_IO_ERROR_NO_SPACE: No space left on drive.
* @G_IO_ERROR_INVALID_ARGUMENT: Invalid argument.
* @G_IO_ERROR_PERMISSION_DENIED: Permission denied.
* @G_IO_ERROR_NOT_SUPPORTED: Operation not supported for the current backend.
* @G_IO_ERROR_NOT_MOUNTED: File isn't mounted.
* @G_IO_ERROR_ALREADY_MOUNTED: File is already mounted.
* @G_IO_ERROR_CLOSED: File was closed.
* @G_IO_ERROR_CANCELLED: Operation was cancelled. See #GCancellable.
* @G_IO_ERROR_PENDING: Operations are still pending.
* @G_IO_ERROR_READ_ONLY: File is read only.
* @G_IO_ERROR_CANT_CREATE_BACKUP: Backup couldn't be created.
* @G_IO_ERROR_WRONG_ETAG: File's Entity Tag was incorrect.
* @G_IO_ERROR_TIMED_OUT: Operation timed out.
* @G_IO_ERROR_WOULD_RECURSE: Operation would be recursive.
* @G_IO_ERROR_BUSY: File is busy.
* @G_IO_ERROR_WOULD_BLOCK: Operation would block.
* @G_IO_ERROR_HOST_NOT_FOUND: Host couldn't be found (remote operations).
* @G_IO_ERROR_WOULD_MERGE: Operation would merge files.
* @G_IO_ERROR_FAILED_HANDLED: Operation failed and a helper program has
* already interacted with the user. Do not display any error dialog.
* @G_IO_ERROR_TOO_MANY_OPEN_FILES: The current process has too many files
* open and can't open any more. Duplicate descriptors do count toward
* this limit. Since 2.20
* @G_IO_ERROR_NOT_INITIALIZED: The object has not been initialized. Since 2.22
* @G_IO_ERROR_ADDRESS_IN_USE: The requested address is already in use. Since 2.22
* @G_IO_ERROR_PARTIAL_INPUT: Need more input to finish operation. Since 2.24
* @G_IO_ERROR_INVALID_DATA: There input data was invalid. Since 2.24
* @G_IO_ERROR_DBUS_ERROR: A remote object generated an error that
* doesn't correspond to a locally registered #GError error
* domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
* error name and g_dbus_error_strip_remote_error() to fix up the
* message so it matches what was received on the wire. Since 2.26.
*
* Error codes returned by GIO functions.
*
**/
typedef enum {
G_IO_ERROR_FAILED,
G_IO_ERROR_NOT_FOUND,
G_IO_ERROR_EXISTS,
G_IO_ERROR_IS_DIRECTORY,
G_IO_ERROR_NOT_DIRECTORY,
G_IO_ERROR_NOT_EMPTY,
G_IO_ERROR_NOT_REGULAR_FILE,
G_IO_ERROR_NOT_SYMBOLIC_LINK,
G_IO_ERROR_NOT_MOUNTABLE_FILE,
G_IO_ERROR_FILENAME_TOO_LONG,
G_IO_ERROR_INVALID_FILENAME,
G_IO_ERROR_TOO_MANY_LINKS,
G_IO_ERROR_NO_SPACE,
G_IO_ERROR_INVALID_ARGUMENT,
G_IO_ERROR_PERMISSION_DENIED,
G_IO_ERROR_NOT_SUPPORTED,
G_IO_ERROR_NOT_MOUNTED,
G_IO_ERROR_ALREADY_MOUNTED,
G_IO_ERROR_CLOSED,
G_IO_ERROR_CANCELLED,
G_IO_ERROR_PENDING,
G_IO_ERROR_READ_ONLY,
G_IO_ERROR_CANT_CREATE_BACKUP,
G_IO_ERROR_WRONG_ETAG,
G_IO_ERROR_TIMED_OUT,
G_IO_ERROR_WOULD_RECURSE,
G_IO_ERROR_BUSY,
G_IO_ERROR_WOULD_BLOCK,
G_IO_ERROR_HOST_NOT_FOUND,
G_IO_ERROR_WOULD_MERGE,
G_IO_ERROR_FAILED_HANDLED,
G_IO_ERROR_TOO_MANY_OPEN_FILES,
G_IO_ERROR_NOT_INITIALIZED,
G_IO_ERROR_ADDRESS_IN_USE,
G_IO_ERROR_PARTIAL_INPUT,
G_IO_ERROR_INVALID_DATA,
G_IO_ERROR_DBUS_ERROR
} GIOErrorEnum;
/**
* GAskPasswordFlags:
* @G_ASK_PASSWORD_NEED_PASSWORD: operation requires a password.
* @G_ASK_PASSWORD_NEED_USERNAME: operation requires a username.
* @G_ASK_PASSWORD_NEED_DOMAIN: operation requires a domain.
* @G_ASK_PASSWORD_SAVING_SUPPORTED: operation supports saving settings.
* @G_ASK_PASSWORD_ANONYMOUS_SUPPORTED: operation supports anonymous users.
*
* #GAskPasswordFlags are used to request specific information from the
* user, or to notify the user of their choices in an authentication
* situation.
**/
typedef enum {
G_ASK_PASSWORD_NEED_PASSWORD = (1 << 0),
G_ASK_PASSWORD_NEED_USERNAME = (1 << 1),
G_ASK_PASSWORD_NEED_DOMAIN = (1 << 2),
G_ASK_PASSWORD_SAVING_SUPPORTED = (1 << 3),
G_ASK_PASSWORD_ANONYMOUS_SUPPORTED = (1 << 4)
} GAskPasswordFlags;
/**
* GPasswordSave:
* @G_PASSWORD_SAVE_NEVER: never save a password.
* @G_PASSWORD_SAVE_FOR_SESSION: save a password for the session.
* @G_PASSWORD_SAVE_PERMANENTLY: save a password permanently.
*
* #GPasswordSave is used to indicate the lifespan of a saved password.
*
* #Gvfs stores passwords in the Gnome keyring when this flag allows it
* to, and later retrieves it again from there.
**/
typedef enum {
G_PASSWORD_SAVE_NEVER,
G_PASSWORD_SAVE_FOR_SESSION,
G_PASSWORD_SAVE_PERMANENTLY
} GPasswordSave;
/**
* GMountOperationResult:
* @G_MOUNT_OPERATION_HANDLED: The request was fulfilled and the
* user specified data is now available
* @G_MOUNT_OPERATION_ABORTED: The user requested the mount operation
* to be aborted
* @G_MOUNT_OPERATION_UNHANDLED: The request was unhandled (i.e. not
* implemented)
*
* #GMountOperationResult is returned as a result when a request for
* information is send by the mounting operation.
**/
typedef enum {
G_MOUNT_OPERATION_HANDLED,
G_MOUNT_OPERATION_ABORTED,
G_MOUNT_OPERATION_UNHANDLED
} GMountOperationResult;
/**
* GOutputStreamSpliceFlags:
* @G_OUTPUT_STREAM_SPLICE_NONE: Do not close either stream.
* @G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE: Close the source stream after
* the splice.
* @G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET: Close the target stream after
* the splice.
*
* GOutputStreamSpliceFlags determine how streams should be spliced.
**/
typedef enum {
G_OUTPUT_STREAM_SPLICE_NONE = 0,
G_OUTPUT_STREAM_SPLICE_CLOSE_SOURCE = (1 << 0),
G_OUTPUT_STREAM_SPLICE_CLOSE_TARGET = (1 << 1)
} GOutputStreamSpliceFlags;
/**
* GEmblemOrigin:
* @G_EMBLEM_ORIGIN_UNKNOWN: Emblem of unknown origin
* @G_EMBLEM_ORIGIN_DEVICE: Emblem adds device-specific information
* @G_EMBLEM_ORIGIN_LIVEMETADATA: Emblem depicts live metadata, such as "readonly"
* @G_EMBLEM_ORIGIN_TAG: Emblem comes from a user-defined tag, e.g. set by nautilus (in the future)
*
* GEmblemOrigin is used to add information about the origin of the emblem
* to #GEmblem.
*
* Since: 2.18
*/
typedef enum {
G_EMBLEM_ORIGIN_UNKNOWN,
G_EMBLEM_ORIGIN_DEVICE,
G_EMBLEM_ORIGIN_LIVEMETADATA,
G_EMBLEM_ORIGIN_TAG
} GEmblemOrigin;
/**
* GResolverError:
* @G_RESOLVER_ERROR_NOT_FOUND: the requested name/address/service was not
* found
* @G_RESOLVER_ERROR_TEMPORARY_FAILURE: the requested information could not
* be looked up due to a network error or similar problem
* @G_RESOLVER_ERROR_INTERNAL: unknown error
*
* An error code used with %G_RESOLVER_ERROR in a #GError returned
* from a #GResolver routine.
*
* Since: 2.22
*/
typedef enum {
G_RESOLVER_ERROR_NOT_FOUND,
G_RESOLVER_ERROR_TEMPORARY_FAILURE,
G_RESOLVER_ERROR_INTERNAL
} GResolverError;
/**
* GSocketFamily:
* @G_SOCKET_FAMILY_INVALID: no address family
* @G_SOCKET_FAMILY_IPV4: the IPv4 family
* @G_SOCKET_FAMILY_IPV6: the IPv6 family
* @G_SOCKET_FAMILY_UNIX: the UNIX domain family
*
* The protocol family of a #GSocketAddress. (These values are
* identical to the system defines %AF_INET, %AF_INET6 and %AF_UNIX,
* if available.)
*
* Since: 2.22
*/
typedef enum {
G_SOCKET_FAMILY_INVALID,
#ifdef GLIB_SYSDEF_AF_UNIX
G_SOCKET_FAMILY_UNIX = GLIB_SYSDEF_AF_UNIX,
#endif
G_SOCKET_FAMILY_IPV4 = GLIB_SYSDEF_AF_INET,
G_SOCKET_FAMILY_IPV6 = GLIB_SYSDEF_AF_INET6
} GSocketFamily;
/**
* GSocketType:
* @G_SOCKET_TYPE_INVALID: Type unknown or wrong
* @G_SOCKET_TYPE_STREAM: Reliable connection-based byte streams (e.g. TCP).
* @G_SOCKET_TYPE_DATAGRAM: Connectionless, unreliable datagram passing.
* (e.g. UDP)
* @G_SOCKET_TYPE_SEQPACKET: Reliable connection-based passing of datagrams
* of fixed maximum length (e.g. SCTP).
*
* Flags used when creating a #GSocket. Some protocols may not implement
* all the socket types.
*
* Since: 2.22
*/
typedef enum
{
G_SOCKET_TYPE_INVALID,
G_SOCKET_TYPE_STREAM,
G_SOCKET_TYPE_DATAGRAM,
G_SOCKET_TYPE_SEQPACKET
} GSocketType;
/**
* GSocketMsgFlags:
* @G_SOCKET_MSG_NONE: No flags.
* @G_SOCKET_MSG_OOB: Request to send/receive out of band data.
* @G_SOCKET_MSG_PEEK: Read data from the socket without removing it from
* the queue.
* @G_SOCKET_MSG_DONTROUTE: Don't use a gateway to send out the packet,
* only send to hosts on directly connected networks.
*
* Flags used in g_socket_receive_message() and g_socket_send_message().
* The flags listed in the enum are some commonly available flags, but the
* values used for them are the same as on the platform, and any other flags
* are passed in/out as is. So to use a platform specific flag, just include
* the right system header and pass in the flag.
*
* Since: 2.22
*/
typedef enum
{
G_SOCKET_MSG_NONE,
G_SOCKET_MSG_OOB = GLIB_SYSDEF_MSG_OOB,
G_SOCKET_MSG_PEEK = GLIB_SYSDEF_MSG_PEEK,
G_SOCKET_MSG_DONTROUTE = GLIB_SYSDEF_MSG_DONTROUTE
} GSocketMsgFlags;
/**
* GSocketProtocol:
* @G_SOCKET_PROTOCOL_UNKNOWN: The protocol type is unknown
* @G_SOCKET_PROTOCOL_DEFAULT: The default protocol for the family/type
* @G_SOCKET_PROTOCOL_TCP: TCP over IP
* @G_SOCKET_PROTOCOL_UDP: UDP over IP
* @G_SOCKET_PROTOCOL_SCTP: SCTP over IP
*
* A protocol identifier is specified when creating a #GSocket, which is a
* family/type specific identifier, where 0 means the default protocol for
* the particular family/type.
*
* This enum contains a set of commonly available and used protocols. You
* can also pass any other identifiers handled by the platform in order to
* use protocols not listed here.
*
* Since: 2.22
*/
typedef enum {
G_SOCKET_PROTOCOL_UNKNOWN = -1,
G_SOCKET_PROTOCOL_DEFAULT = 0,
G_SOCKET_PROTOCOL_TCP = 6,
G_SOCKET_PROTOCOL_UDP = 17,
G_SOCKET_PROTOCOL_SCTP = 132
} GSocketProtocol;
/**
* GZlibCompressorFormat:
* @G_ZLIB_COMPRESSOR_FORMAT_ZLIB: deflate compression with zlib header
* @G_ZLIB_COMPRESSOR_FORMAT_GZIP: gzip file format
* @G_ZLIB_COMPRESSOR_FORMAT_RAW: deflate compression with no header
*
* Used to select the type of data format to use for #GZlibDecompressor
* and #GZlibCompressor.
*
* Since: 2.24
*/
typedef enum {
G_ZLIB_COMPRESSOR_FORMAT_ZLIB,
G_ZLIB_COMPRESSOR_FORMAT_GZIP,
G_ZLIB_COMPRESSOR_FORMAT_RAW
} GZlibCompressorFormat;
/**
* GUnixSocketAddressType:
* @G_UNIX_SOCKET_ADDRESS_INVALID: invalid
* @G_UNIX_SOCKET_ADDRESS_ANONYMOUS: anonymous
* @G_UNIX_SOCKET_ADDRESS_PATH: a filesystem path
* @G_UNIX_SOCKET_ADDRESS_ABSTRACT: an abstract name
* @G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED: an abstract name, 0-padded
* to the full length of a unix socket name
*
* The type of name used by a #GUnixSocketAddress.
* %G_UNIX_SOCKET_ADDRESS_PATH indicates a traditional unix domain
* socket bound to a filesystem path. %G_UNIX_SOCKET_ADDRESS_ANONYMOUS
* indicates a socket not bound to any name (eg, a client-side socket,
* or a socket created with socketpair()).
*
* For abstract sockets, there are two incompatible ways of naming
* them: the man pages suggest using the entire <literal>struct
* sockaddr_un</literal> as the name, padding the unused parts of the
* %sun_path field with zeroes; this corresponds to
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
* instead just use a portion of %sun_path, and pass an appropriate
* smaller length to bind() or connect(). This is
* %G_UNIX_SOCKET_ADDRESS_ABSTRACT.
*
* Since: 2.26
*/
typedef enum {
G_UNIX_SOCKET_ADDRESS_INVALID,
G_UNIX_SOCKET_ADDRESS_ANONYMOUS,
G_UNIX_SOCKET_ADDRESS_PATH,
G_UNIX_SOCKET_ADDRESS_ABSTRACT,
G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED
} GUnixSocketAddressType;
/**
* GBusType:
* @G_BUS_TYPE_STARTER: An alias for the message bus that activated the process, if any.
* @G_BUS_TYPE_NONE: Not a message bus.
* @G_BUS_TYPE_SYSTEM: The system-wide message bus.
* @G_BUS_TYPE_SESSION: The login session message bus.
*
* An enumeration for well-known message buses.
*
* Since: 2.26
*/
typedef enum
{
G_BUS_TYPE_STARTER = -1,
G_BUS_TYPE_NONE = 0,
G_BUS_TYPE_SYSTEM = 1,
G_BUS_TYPE_SESSION = 2
} GBusType;
/**
* GBusNameOwnerFlags:
* @G_BUS_NAME_OWNER_FLAGS_NONE: No flags set.
* @G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT: Allow another message bus connection to claim the the name.
* @G_BUS_NAME_OWNER_FLAGS_REPLACE: If another message bus connection owns the name and have
* specified #G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
*
* Flags used in g_bus_own_name().
*
* Since: 2.26
*/
typedef enum
{
G_BUS_NAME_OWNER_FLAGS_NONE = 0, /*< nick=none >*/
G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT = (1<<0), /*< nick=allow-replacement >*/
G_BUS_NAME_OWNER_FLAGS_REPLACE = (1<<1) /*< nick=replace >*/
} GBusNameOwnerFlags;
/**
* GBusNameWatcherFlags:
* @G_BUS_NAME_WATCHER_FLAGS_NONE: No flags set.
* @G_BUS_NAME_WATCHER_FLAGS_AUTO_START: If no-one owns the name when
* beginning to watch the name, ask the bus to launch an owner for the
* name.
*
* Flags used in g_bus_watch_name().
*
* Since: 2.26
*/
typedef enum
{
G_BUS_NAME_WATCHER_FLAGS_NONE = 0,
G_BUS_NAME_WATCHER_FLAGS_AUTO_START = (1<<0)
} GBusNameWatcherFlags;
/**
* GDBusProxyFlags:
* @G_DBUS_PROXY_FLAGS_NONE: No flags set.
* @G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES: Don't load properties.
* @G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS: Don't connect to signals on the remote object.
* @G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START: If not set and the proxy if for a well-known name,
* then request the bus to launch an owner for the name if no-one owns the name. This flag can
* only be used in proxies for well-known names.
*
* Flags used when constructing an instance of a #GDBusProxy derived class.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_PROXY_FLAGS_NONE = 0,
G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES = (1<<0),
G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS = (1<<1),
G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START = (1<<2)
} GDBusProxyFlags;
/**
* GDBusError:
* @G_DBUS_ERROR_FAILED:
* A generic error; "something went wrong" - see the error message for
* more.
* @G_DBUS_ERROR_NO_MEMORY:
* There was not enough memory to complete an operation.
* @G_DBUS_ERROR_SERVICE_UNKNOWN:
* The bus doesn't know how to launch a service to supply the bus name
* you wanted.
* @G_DBUS_ERROR_NAME_HAS_NO_OWNER:
* The bus name you referenced doesn't exist (i.e. no application owns
* it).
* @G_DBUS_ERROR_NO_REPLY:
* No reply to a message expecting one, usually means a timeout occurred.
* @G_DBUS_ERROR_IO_ERROR:
* Something went wrong reading or writing to a socket, for example.
* @G_DBUS_ERROR_BAD_ADDRESS:
* A D-Bus bus address was malformed.
* @G_DBUS_ERROR_NOT_SUPPORTED:
* Requested operation isn't supported (like ENOSYS on UNIX).
* @G_DBUS_ERROR_LIMITS_EXCEEDED:
* Some limited resource is exhausted.
* @G_DBUS_ERROR_ACCESS_DENIED:
* Security restrictions don't allow doing what you're trying to do.
* @G_DBUS_ERROR_AUTH_FAILED:
* Authentication didn't work.
* @G_DBUS_ERROR_NO_SERVER:
* Unable to connect to server (probably caused by ECONNREFUSED on a
* socket).
* @G_DBUS_ERROR_TIMEOUT:
* Certain timeout errors, possibly ETIMEDOUT on a socket. Note that
* %G_DBUS_ERROR_NO_REPLY is used for message reply timeouts. Warning:
* this is confusingly-named given that %G_DBUS_ERROR_TIMED_OUT also
* exists. We can't fix it for compatibility reasons so just be
* careful.
* @G_DBUS_ERROR_NO_NETWORK:
* No network access (probably ENETUNREACH on a socket).
* @G_DBUS_ERROR_ADDRESS_IN_USE:
* Can't bind a socket since its address is in use (i.e. EADDRINUSE).
* @G_DBUS_ERROR_DISCONNECTED:
* The connection is disconnected and you're trying to use it.
* @G_DBUS_ERROR_INVALID_ARGS:
* Invalid arguments passed to a method call.
* @G_DBUS_ERROR_FILE_NOT_FOUND:
* Missing file.
* @G_DBUS_ERROR_FILE_EXISTS:
* Existing file and the operation you're using does not silently overwrite.
* @G_DBUS_ERROR_UNKNOWN_METHOD:
* Method name you invoked isn't known by the object you invoked it on.
* @G_DBUS_ERROR_TIMED_OUT:
* Certain timeout errors, e.g. while starting a service. Warning: this is
* confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We
* can't fix it for compatibility reasons so just be careful.
* @G_DBUS_ERROR_MATCH_RULE_NOT_FOUND:
* Tried to remove or modify a match rule that didn't exist.
* @G_DBUS_ERROR_MATCH_RULE_INVALID:
* The match rule isn't syntactically valid.
* @G_DBUS_ERROR_SPAWN_EXEC_FAILED:
* While starting a new process, the exec() call failed.
* @G_DBUS_ERROR_SPAWN_FORK_FAILED:
* While starting a new process, the fork() call failed.
* @G_DBUS_ERROR_SPAWN_CHILD_EXITED:
* While starting a new process, the child exited with a status code.
* @G_DBUS_ERROR_SPAWN_CHILD_SIGNALED:
* While starting a new process, the child exited on a signal.
* @G_DBUS_ERROR_SPAWN_FAILED:
* While starting a new process, something went wrong.
* @G_DBUS_ERROR_SPAWN_SETUP_FAILED:
* We failed to setup the environment correctly.
* @G_DBUS_ERROR_SPAWN_CONFIG_INVALID:
* We failed to setup the config parser correctly.
* @G_DBUS_ERROR_SPAWN_SERVICE_INVALID:
* Bus name was not valid.
* @G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND:
* Service file not found in system-services directory.
* @G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID:
* Permissions are incorrect on the setuid helper.
* @G_DBUS_ERROR_SPAWN_FILE_INVALID:
* Service file invalid (Name, User or Exec missing).
* @G_DBUS_ERROR_SPAWN_NO_MEMORY:
* Tried to get a UNIX process ID and it wasn't available.
* @G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN:
* Tried to get a UNIX process ID and it wasn't available.
* @G_DBUS_ERROR_INVALID_SIGNATURE:
* A type signature is not valid.
* @G_DBUS_ERROR_INVALID_FILE_CONTENT:
* A file contains invalid syntax or is otherwise broken.
* @G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN:
* Asked for SELinux security context and it wasn't available.
* @G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN:
* Asked for ADT audit data and it wasn't available.
* @G_DBUS_ERROR_OBJECT_PATH_IN_USE:
* There's already an object with the requested object path.
*
* Error codes for the %G_DBUS_ERROR error domain.
*
* Since: 2.26
*/
typedef enum
{
/* Well-known errors in the org.freedesktop.DBus.Error namespace */
G_DBUS_ERROR_FAILED, /* org.freedesktop.DBus.Error.Failed */
G_DBUS_ERROR_NO_MEMORY, /* org.freedesktop.DBus.Error.NoMemory */
G_DBUS_ERROR_SERVICE_UNKNOWN, /* org.freedesktop.DBus.Error.ServiceUnknown */
G_DBUS_ERROR_NAME_HAS_NO_OWNER, /* org.freedesktop.DBus.Error.NameHasNoOwner */
G_DBUS_ERROR_NO_REPLY, /* org.freedesktop.DBus.Error.NoReply */
G_DBUS_ERROR_IO_ERROR, /* org.freedesktop.DBus.Error.IOError */
G_DBUS_ERROR_BAD_ADDRESS, /* org.freedesktop.DBus.Error.BadAddress */
G_DBUS_ERROR_NOT_SUPPORTED, /* org.freedesktop.DBus.Error.NotSupported */
G_DBUS_ERROR_LIMITS_EXCEEDED, /* org.freedesktop.DBus.Error.LimitsExceeded */
G_DBUS_ERROR_ACCESS_DENIED, /* org.freedesktop.DBus.Error.AccessDenied */
G_DBUS_ERROR_AUTH_FAILED, /* org.freedesktop.DBus.Error.AuthFailed */
G_DBUS_ERROR_NO_SERVER, /* org.freedesktop.DBus.Error.NoServer */
G_DBUS_ERROR_TIMEOUT, /* org.freedesktop.DBus.Error.Timeout */
G_DBUS_ERROR_NO_NETWORK, /* org.freedesktop.DBus.Error.NoNetwork */
G_DBUS_ERROR_ADDRESS_IN_USE, /* org.freedesktop.DBus.Error.AddressInUse */
G_DBUS_ERROR_DISCONNECTED, /* org.freedesktop.DBus.Error.Disconnected */
G_DBUS_ERROR_INVALID_ARGS, /* org.freedesktop.DBus.Error.InvalidArgs */
G_DBUS_ERROR_FILE_NOT_FOUND, /* org.freedesktop.DBus.Error.FileNotFound */
G_DBUS_ERROR_FILE_EXISTS, /* org.freedesktop.DBus.Error.FileExists */
G_DBUS_ERROR_UNKNOWN_METHOD, /* org.freedesktop.DBus.Error.UnknownMethod */
G_DBUS_ERROR_TIMED_OUT, /* org.freedesktop.DBus.Error.TimedOut */
G_DBUS_ERROR_MATCH_RULE_NOT_FOUND, /* org.freedesktop.DBus.Error.MatchRuleNotFound */
G_DBUS_ERROR_MATCH_RULE_INVALID, /* org.freedesktop.DBus.Error.MatchRuleInvalid */
G_DBUS_ERROR_SPAWN_EXEC_FAILED, /* org.freedesktop.DBus.Error.Spawn.ExecFailed */
G_DBUS_ERROR_SPAWN_FORK_FAILED, /* org.freedesktop.DBus.Error.Spawn.ForkFailed */
G_DBUS_ERROR_SPAWN_CHILD_EXITED, /* org.freedesktop.DBus.Error.Spawn.ChildExited */
G_DBUS_ERROR_SPAWN_CHILD_SIGNALED, /* org.freedesktop.DBus.Error.Spawn.ChildSignaled */
G_DBUS_ERROR_SPAWN_FAILED, /* org.freedesktop.DBus.Error.Spawn.Failed */
G_DBUS_ERROR_SPAWN_SETUP_FAILED, /* org.freedesktop.DBus.Error.Spawn.FailedToSetup */
G_DBUS_ERROR_SPAWN_CONFIG_INVALID, /* org.freedesktop.DBus.Error.Spawn.ConfigInvalid */
G_DBUS_ERROR_SPAWN_SERVICE_INVALID, /* org.freedesktop.DBus.Error.Spawn.ServiceNotValid */
G_DBUS_ERROR_SPAWN_SERVICE_NOT_FOUND, /* org.freedesktop.DBus.Error.Spawn.ServiceNotFound */
G_DBUS_ERROR_SPAWN_PERMISSIONS_INVALID, /* org.freedesktop.DBus.Error.Spawn.PermissionsInvalid */
G_DBUS_ERROR_SPAWN_FILE_INVALID, /* org.freedesktop.DBus.Error.Spawn.FileInvalid */
G_DBUS_ERROR_SPAWN_NO_MEMORY, /* org.freedesktop.DBus.Error.Spawn.NoMemory */
G_DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN, /* org.freedesktop.DBus.Error.UnixProcessIdUnknown */
G_DBUS_ERROR_INVALID_SIGNATURE, /* org.freedesktop.DBus.Error.InvalidSignature */
G_DBUS_ERROR_INVALID_FILE_CONTENT, /* org.freedesktop.DBus.Error.InvalidFileContent */
G_DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN, /* org.freedesktop.DBus.Error.SELinuxSecurityContextUnknown */
G_DBUS_ERROR_ADT_AUDIT_DATA_UNKNOWN, /* org.freedesktop.DBus.Error.AdtAuditDataUnknown */
G_DBUS_ERROR_OBJECT_PATH_IN_USE /* org.freedesktop.DBus.Error.ObjectPathInUse */
} GDBusError;
/* Remember to update g_dbus_error_quark() in gdbuserror.c if you extend this enumeration */
/**
* GDBusConnectionFlags:
* @G_DBUS_CONNECTION_FLAGS_NONE: No flags set.
* @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT: Perform authentication against server.
* @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER: Perform authentication against client.
* @G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: When
* authenticating as a server, allow the anonymous authentication
* method.
* @G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION: Pass this flag if connecting to a peer that is a
* message bus. This means that the Hello() method will be invoked as part of the connection setup.
* @G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING: If set, processing of D-Bus messages is
* delayed until g_dbus_connection_start_message_processing() is called.
*
* Flags used when creating a new #GDBusConnection.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_CONNECTION_FLAGS_NONE = 0,
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT = (1<<0),
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER = (1<<1),
G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<2),
G_DBUS_CONNECTION_FLAGS_MESSAGE_BUS_CONNECTION = (1<<3),
G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING = (1<<4)
} GDBusConnectionFlags;
/**
* GDBusCapabilityFlags:
* @G_DBUS_CAPABILITY_FLAGS_NONE: No flags set.
* @G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING: The connection
* supports exchanging UNIX file descriptors with the remote peer.
*
* Capabilities negotiated with the remote peer.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_CAPABILITY_FLAGS_NONE = 0,
G_DBUS_CAPABILITY_FLAGS_UNIX_FD_PASSING = (1<<0)
} GDBusCapabilityFlags;
/**
* GDBusCallFlags:
* @G_DBUS_CALL_FLAGS_NONE: No flags set.
* @G_DBUS_CALL_FLAGS_NO_AUTO_START: The bus must not launch
* an owner for the destination name in response to this method
* invocation.
*
* Flags used in g_dbus_connection_call() and similar APIs.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_CALL_FLAGS_NONE = 0,
G_DBUS_CALL_FLAGS_NO_AUTO_START = (1<<0)
} GDBusCallFlags;
/**
* GDBusMessageType:
* @G_DBUS_MESSAGE_TYPE_INVALID: Message is of invalid type.
* @G_DBUS_MESSAGE_TYPE_METHOD_CALL: Method call.
* @G_DBUS_MESSAGE_TYPE_METHOD_RETURN: Method reply.
* @G_DBUS_MESSAGE_TYPE_ERROR: Error reply.
* @G_DBUS_MESSAGE_TYPE_SIGNAL: Signal emission.
*
* Message types used in #GDBusMessage.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_MESSAGE_TYPE_INVALID,
G_DBUS_MESSAGE_TYPE_METHOD_CALL,
G_DBUS_MESSAGE_TYPE_METHOD_RETURN,
G_DBUS_MESSAGE_TYPE_ERROR,
G_DBUS_MESSAGE_TYPE_SIGNAL
} GDBusMessageType;
/**
* GDBusMessageFlags:
* @G_DBUS_MESSAGE_FLAGS_NONE: No flags set.
* @G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED: A reply is not expected.
* @G_DBUS_MESSAGE_FLAGS_NO_AUTO_START: The bus must not launch an
* owner for the destination name in response to this message.
*
* Message flags used in #GDBusMessage.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_MESSAGE_FLAGS_NONE = 0,
G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED = (1<<0),
G_DBUS_MESSAGE_FLAGS_NO_AUTO_START = (1<<1)
} GDBusMessageFlags;
/**
* GDBusMessageHeaderField:
* @G_DBUS_MESSAGE_HEADER_FIELD_INVALID: Not a valid header field.
* @G_DBUS_MESSAGE_HEADER_FIELD_PATH: The object path.
* @G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE: The interface name.
* @G_DBUS_MESSAGE_HEADER_FIELD_MEMBER: The method or signal name.
* @G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME: The name of the error that occurred.
* @G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL: The serial number the message is a reply to.
* @G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION: The name the message is intended for.
* @G_DBUS_MESSAGE_HEADER_FIELD_SENDER: Unique name of the sender of the message (filled in by the bus).
* @G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE: The signature of the message body.
* @G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS: The number of UNIX file descriptors that accompany the message.
*
* Header fields used in #GDBusMessage.
*
* Since: 2.26
*/
typedef enum {
G_DBUS_MESSAGE_HEADER_FIELD_INVALID,
G_DBUS_MESSAGE_HEADER_FIELD_PATH,
G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE,
G_DBUS_MESSAGE_HEADER_FIELD_MEMBER,
G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME,
G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL,
G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION,
G_DBUS_MESSAGE_HEADER_FIELD_SENDER,
G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE,
G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS
} GDBusMessageHeaderField;
/**
* GDBusPropertyInfoFlags:
* @G_DBUS_PROPERTY_INFO_FLAGS_NONE: No flags set.
* @G_DBUS_PROPERTY_INFO_FLAGS_READABLE: Property is readable.
* @G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE: Property is writable.
*
* Flags describing the access control of a D-Bus property.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_PROPERTY_INFO_FLAGS_NONE = 0,
G_DBUS_PROPERTY_INFO_FLAGS_READABLE = (1<<0),
G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE = (1<<1)
} GDBusPropertyInfoFlags;
/**
* GDBusSubtreeFlags:
* @G_DBUS_SUBTREE_FLAGS_NONE: No flags set.
* @G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES: Method calls to objects not in the enumerated range
* will still be dispatched. This is useful if you want
* to dynamically spawn objects in the subtree.
*
* Flags passed to g_dbus_connection_register_subtree().
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_SUBTREE_FLAGS_NONE = 0,
G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES = (1<<0)
} GDBusSubtreeFlags;
/**
* GDBusServerFlags:
* @G_DBUS_SERVER_FLAGS_NONE: No flags set.
* @G_DBUS_SERVER_FLAGS_RUN_IN_THREAD: All #GDBusServer::new-connection
* signals will run in separated dedicated threads (see signal for
* details).
* @G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS: Allow the anonymous
* authentication method.
*
* Flags used when creating a #GDBusServer.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_SERVER_FLAGS_NONE = 0,
G_DBUS_SERVER_FLAGS_RUN_IN_THREAD = (1<<0),
G_DBUS_SERVER_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS = (1<<1)
} GDBusServerFlags;
/**
* GDBusSignalFlags:
* @G_DBUS_SIGNAL_FLAGS_NONE: No flags set.
*
* Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
*
* Since: 2.26
*/
typedef enum /*< flags >*/
{
G_DBUS_SIGNAL_FLAGS_NONE = 0
} GDBusSignalFlags;
/**
* GDBusSendMessageFlags:
* @G_DBUS_SEND_MESSAGE_FLAGS_NONE: No flags set.
* @G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL: Do not automatically
* assign a serial number from the #GDBusConnection object when
* sending a message.
*
* Flags used when sending #GDBusMessage<!-- -->s on a #GDBusConnection.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_SEND_MESSAGE_FLAGS_NONE = 0,
G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL = (1<<0)
} GDBusSendMessageFlags;
/**
* GCredentialsType:
* @G_CREDENTIALS_TYPE_INVALID: Indicates an invalid native credential type.
* @G_CREDENTIALS_TYPE_LINUX_UCRED: The native credentials type is a <type>struct ucred</type>.
*
* Enumeration describing different kinds of native credential types.
*
* Since: 2.26
*/
typedef enum
{
G_CREDENTIALS_TYPE_INVALID,
G_CREDENTIALS_TYPE_LINUX_UCRED
} GCredentialsType;
/**
* GDBusMessageByteOrder:
* @G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN: The byte order is big endian.
* @G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN: The byte order is little endian.
*
* Enumeration used to describe the byte order of a D-Bus message.
*
* Since: 2.26
*/
typedef enum
{
G_DBUS_MESSAGE_BYTE_ORDER_BIG_ENDIAN = 'B',
G_DBUS_MESSAGE_BYTE_ORDER_LITTLE_ENDIAN = 'l'
} GDBusMessageByteOrder;
G_END_DECLS
#endif /* __GIO_ENUMS_H__ */