github.com_openSUSE_osc/osc/build.py

# Copyright (C) 2006 Novell Inc.  All rights reserved.
# This program is free software; it may be used, copied, modified
# and distributed under the terms of the GNU General Public Licence,
# either version 2, or (at your option) any later version.

import glob
import os
import re
import shutil
import subprocess
import sys
from tempfile import NamedTemporaryFile, mkdtemp
from urllib.parse import urlsplit
from urllib.request import URLError, HTTPError
from xml.etree import ElementTree as ET

from . import conf
from . import connection
from . import core
from . import oscerr
from .conf import config
from .core import get_buildinfo, store_read_project, store_read_package, meta_exists, quote_plus, get_buildconfig, is_package_dir, dgst
from .core import get_binarylist, get_binary_file, run_external, return_external, raw_input
from .fetch import Fetcher, OscFileGrabber, verify_pacs
from .meter import create_text_meter
from .util import cpio
from .util import archquery, debquery, packagequery, rpmquery
from .util import repodata
from .util.helper import decode_it


change_personality = {
    'i686': 'linux32',
    'i586': 'linux32',
    'i386': 'linux32',
    'ppc': 'powerpc32',
    's390': 's390',
    'sparc': 'linux32',
    'sparcv8': 'linux32',
}

can_also_build = {
    'aarch64': ['aarch64'],  # only needed due to used heuristics in build parameter evaluation
    'armv6l': ['armv4l', 'armv5l', 'armv6l', 'armv5el', 'armv6el'],
    'armv7l': ['armv4l', 'armv5l', 'armv6l', 'armv7l', 'armv5el', 'armv6el', 'armv7el'],
    'armv5el': ['armv4l', 'armv5l', 'armv5el'],  # not existing arch, just for compatibility
    'armv6el': ['armv4l', 'armv5l', 'armv6l', 'armv5el', 'armv6el'],  # not existing arch, just for compatibility
    'armv6hl': ['armv4l', 'armv5l', 'armv6l', 'armv5el', 'armv6el'],
    'armv7el': ['armv4l', 'armv5l', 'armv6l', 'armv7l', 'armv5el', 'armv6el', 'armv7el'],  # not existing arch, just for compatibility
    'armv7hl': ['armv7hl'],  # not existing arch, just for compatibility
    'armv8el': ['armv4l', 'armv5el', 'armv6el', 'armv7el', 'armv8el'],  # not existing arch, just for compatibility
    'armv8l': ['armv4l', 'armv5el', 'armv6el', 'armv7el', 'armv8el'],  # not existing arch, just for compatibility
    'armv5tel': ['armv4l', 'armv5el', 'armv5tel'],
    's390x': ['s390'],
    'ppc64': ['ppc', 'ppc64', 'ppc64p7', 'ppc64le'],
    'ppc64le': ['ppc64le', 'ppc64'],
    'i586': ['i386'],
    'i686': ['i586', 'i386'],
    'x86_64': ['i686', 'i586', 'i386'],
    'sparc64': ['sparc64v', 'sparcv9v', 'sparcv9', 'sparcv8', 'sparc'],
    'parisc': ['hppa'],
}

# real arch of this machine
hostarch = os.uname()[4]
if hostarch == 'i686':  # FIXME
    hostarch = 'i586'

if hostarch == 'parisc':
    hostarch = 'hppa'


class Buildinfo:
    """represent the contents of a buildinfo file"""

    def __init__(self, filename, apiurl, buildtype='spec', localpkgs=None, binarytype='rpm'):
        localpkgs = localpkgs or []
        try:
            tree = ET.parse(filename)
        except:
            print('could not parse the buildinfo:', file=sys.stderr)
            print(open(filename).read(), file=sys.stderr)
            sys.exit(1)

        root = tree.getroot()

        self.apiurl = apiurl

        if root.find('error') is not None:
            sys.stderr.write('buildinfo is broken... it says:\n')
            error = root.find('error').text
            if error.startswith('unresolvable: '):
                sys.stderr.write('unresolvable: ')
                sys.stderr.write('\n     '.join(error[14:].split(',')))
            else:
                sys.stderr.write(error)
            sys.stderr.write('\n')
            sys.exit(1)

        if not (apiurl.startswith('https://') or apiurl.startswith('http://')):
            raise URLError('invalid protocol for the apiurl: \'%s\'' % apiurl)

        self.buildtype = buildtype
        self.binarytype = binarytype
        self.apiurl = apiurl

        # are we building .rpm or .deb?
        # XXX: shouldn't we deliver the type via the buildinfo?
        self.pacsuffix = 'rpm'
        if self.buildtype == 'dsc' or self.buildtype == 'collax' or self.binarytype == 'deb':
            self.pacsuffix = 'deb'
        if self.buildtype == 'arch':
            self.pacsuffix = 'arch'
        if self.buildtype == 'livebuild':
            self.pacsuffix = 'deb'
        if self.buildtype == 'snapcraft':
            # atm ubuntu is used as base, but we need to be more clever when
            # snapcraft also supports rpm
            self.pacsuffix = 'deb'

        # The architectures become a bit mad ...
        # buildarch: The architecture of the build result      (host arch in GNU definition)
        # hostarch:  The architecture of the build environment (build arch in GNU defintion)
        # crossarch: Same as hostarch, but indicating that a sysroot with an incompatible architecture exists
        self.buildarch = root.find('arch').text
        if root.find('crossarch') is not None:
            self.crossarch = root.find('crossarch').text
        else:
            self.crossarch = None
        if root.find('hostarch') is not None:
            self.hostarch = root.find('hostarch').text
        else:
            self.hostarch = None

        if root.find('release') is not None:
            self.release = root.find('release').text
        else:
            self.release = None
        if config['api_host_options'][apiurl]['downloadurl']:
            self.enable_cpio = False
            self.downloadurl = config['api_host_options'][apiurl]['downloadurl'] + "/repositories"
            if config['http_debug']:
                print("⚠️   setting dl_url to %s" % config['api_host_options'][apiurl]['downloadurl'])
        else:
            self.enable_cpio = True
            self.downloadurl = root.get('downloadurl')

        self.debuginfo = 0
        if root.find('debuginfo') is not None:
            try:
                self.debuginfo = int(root.find('debuginfo').text)
            except ValueError:
                pass

        self.deps = []
        self.projects = {}
        self.keys = []
        self.prjkeys = []
        self.pathes = []
        self.urls = {}
        self.modules = []
        for node in root.findall('module'):
            self.modules.append(node.text)
        for node in root.findall('bdep'):
            if node.find('sysroot'):
                p = Pac(node, self.buildarch, self.pacsuffix,
                        apiurl, localpkgs)
            else:
                pac_arch = self.crossarch
                if pac_arch is None:
                    pac_arch = self.buildarch
                p = Pac(node, pac_arch, self.pacsuffix,
                        apiurl, localpkgs)
            if p.project:
                self.projects[p.project] = 1
            self.deps.append(p)
        for node in root.findall('path'):
            # old simple list for compatibility
            # XXX: really old? This is currently used for kiwi builds
            self.pathes.append(node.get('project') + "/" + node.get('repository'))
            # a hash providing the matching URL for specific repos for newer OBS instances
            if node.get('url'):
                baseurl = node.get('url').replace('%', '%%')
                if config['api_host_options'][apiurl]['downloadurl']:
                    # Add the path element to the download url override.
                    baseurl = config['api_host_options'][apiurl]['downloadurl'] + urlsplit(node.get('url'))[2]
                self.urls[node.get('project') + "/" + node.get('repository')] = baseurl + '/%(arch)s/%(filename)s'

        self.vminstall_list = [dep.name for dep in self.deps if dep.vminstall]
        self.preinstall_list = [dep.name for dep in self.deps if dep.preinstall]
        self.runscripts_list = [dep.name for dep in self.deps if dep.runscripts]
        self.noinstall_list = [dep.name for dep in self.deps if dep.noinstall]
        self.installonly_list = [dep.name for dep in self.deps if dep.installonly]

        if root.find('preinstallimage') is not None:
            self.preinstallimage = root.find('preinstallimage')
        else:
            self.preinstallimage = None

    def has_dep(self, name):
        for i in self.deps:
            if i.name == name:
                return True
        return False

    def remove_dep(self, name):
        # we need to iterate over all deps because if this a
        # kiwi build the same package might appear multiple times
        # NOTE: do not loop and remove items, the second same one would not get catched
        self.deps = [i for i in self.deps if not i.name == name]


class Pac:
    """represent a package to be downloaded

    We build a map that's later used to fill our URL templates
    """

    def __init__(self, node, buildarch, pacsuffix, apiurl, localpkgs=None):
        localpkgs = localpkgs or []
        self.mp = {}
        for i in ['binary', 'package',
                  'epoch', 'version', 'release', 'hdrmd5',
                  'project', 'repository', 'sysroot',
                  'preinstall', 'vminstall', 'runscripts',
                  'noinstall', 'installonly', 'notmeta',
                  ]:
            self.mp[i] = node.get(i)

        self.mp['buildarch'] = buildarch
        self.mp['pacsuffix'] = pacsuffix

        self.mp['arch'] = node.get('arch') or self.mp['buildarch']
        self.mp['name'] = node.get('name') or self.mp['binary']

        # this is not the ideal place to check if the package is a localdep or not
        localdep = self.mp['name'] in localpkgs  # and not self.mp['noinstall']
        if not localdep and not (node.get('project') and node.get('repository')):
            raise oscerr.APIError('incomplete information for package %s, may be caused by a broken project configuration.'
                                  % self.mp['name'])

        if not localdep:
            self.mp['extproject'] = node.get('project').replace(':', ':/')
            self.mp['extrepository'] = node.get('repository').replace(':', ':/')
        self.mp['repopackage'] = node.get('package') or '_repository'
        self.mp['repoarch'] = node.get('repoarch') or self.mp['buildarch']

        if pacsuffix == 'deb' and not (self.mp['name'] and self.mp['arch'] and self.mp['version']):
            raise oscerr.APIError(
                "buildinfo for package %s/%s/%s is incomplete"
                % (self.mp['name'], self.mp['arch'], self.mp['version']))

        self.mp['apiurl'] = apiurl

        if self.mp['epoch'] is None:
            epoch = None
        else:
            epoch = self.mp['epoch'].encode()

        if self.mp['release'] is None:
            release = None
        else:
            release = self.mp['release'].encode()

        if self.mp['name'].startswith('container:'):
            canonname = self.mp['name'] + '.tar.xz'
        elif pacsuffix == 'deb':
            canonname = debquery.DebQuery.filename(self.mp['name'].encode(), epoch, self.mp['version'].encode(), release, self.mp['arch'].encode())
        elif pacsuffix == 'arch':
            canonname = archquery.ArchQuery.filename(self.mp['name'].encode(), epoch, self.mp['version'].encode(), release, self.mp['arch'].encode())
        else:
            canonname = rpmquery.RpmQuery.filename(self.mp['name'].encode(), epoch, self.mp['version'].encode(), release or b'0', self.mp['arch'].encode())

        self.mp['canonname'] = decode_it(canonname)
        # maybe we should rename filename key to binary
        self.mp['filename'] = node.get('binary') or decode_it(canonname)
        if self.mp['repopackage'] == '_repository':
            self.mp['repofilename'] = self.mp['name']
        else:
            # OBS 2.3 puts binary into product bdeps (noinstall ones)
            self.mp['repofilename'] = self.mp['filename']

        # make the content of the dictionary accessible as class attributes
        self.__dict__.update(self.mp)

    def makeurls(self, cachedir, urllist):
        self.localdir = '%s/%s/%s/%s' % (cachedir, self.project, self.repository, self.repoarch)
        self.fullfilename = os.path.join(self.localdir, self.canonname)
        self.urllist = [url % self.mp for url in urllist]

    def __str__(self):
        return self.name

    def __repr__(self):
        return "%s" % self.name


def get_preinstall_image(apiurl, arch, cache_dir, img_info, offline=False):
    """
    Searches preinstall image according to build info and downloads it to cache
    (unless offline is set to ``True`` (default: ``False``)).
    Returns preinstall image path, source and list of image binaries, which can
    be used to create rpmlist.

    .. note::
        preinstall image can be used only for new build roots!
    """
    imagefile = ''
    imagesource = ''
    img_bins = []
    for bin in img_info.findall('binary'):
        img_bins.append(bin.text)

    img_project = img_info.get('project')
    img_repository = img_info.get('repository')
    img_arch = arch
    img_pkg = img_info.get('package')
    img_file = img_info.get('filename')
    img_hdrmd5 = img_info.get('hdrmd5')
    if not img_hdrmd5:
        img_hdrmd5 = img_file
    cache_path = '%s/%s/%s/%s' % (cache_dir, img_project, img_repository, img_arch)
    ifile_path = '%s/%s' % (cache_path, img_file)
    ifile_path_part = '%s.part' % ifile_path

    imagefile = ifile_path
    imagesource = "%s/%s/%s [%s]" % (img_project, img_repository, img_pkg, img_hdrmd5)

    if not os.path.exists(ifile_path):
        if offline:
            return '', '', []
        url = "%s/build/%s/%s/%s/%s/%s" % (apiurl, img_project, img_repository, img_arch, img_pkg, img_file)
        print("downloading preinstall image %s" % imagesource)
        if not os.path.exists(cache_path):
            try:
                os.makedirs(cache_path, mode=0o755)
            except OSError as e:
                print('packagecachedir is not writable for you?', file=sys.stderr)
                print(e, file=sys.stderr)
                sys.exit(1)
        progress_obj = None
        if sys.stdout.isatty():
            progress_obj = create_text_meter(use_pb_fallback=False)
        gr = OscFileGrabber(progress_obj=progress_obj)
        try:
            gr.urlgrab(url, filename=ifile_path_part, text='fetching image')
        except HTTPError as e:
            print("Failed to download! ecode:%i reason:%s" % (e.code, e.reason))
            return ('', '', [])
        # download ok, rename partial file to final file name
        os.rename(ifile_path_part, ifile_path)
    return (imagefile, imagesource, img_bins)


def get_built_files(pacdir, buildtype):
    if buildtype == 'spec':
        debs_dir = os.path.join(pacdir, 'DEBS')
        sdebs_dir = os.path.join(pacdir, 'SDEBS')
        if os.path.isdir(debs_dir) or os.path.isdir(sdebs_dir):
            # (S)DEBS directories detected, list their *.(s)deb files
            b_built = subprocess.Popen(['find', debs_dir, '-name', '*.deb'],
                                       stdout=subprocess.PIPE).stdout.read().strip()
            s_built = subprocess.Popen(['find', sdebs_dir, '-name', '*.sdeb'],
                                       stdout=subprocess.PIPE).stdout.read().strip()
        else:
            # default: (S)RPMS directories and their *.rpm files
            b_built = subprocess.Popen(['find', os.path.join(pacdir, 'RPMS'),
                                        '-name', '*.rpm'],
                                       stdout=subprocess.PIPE).stdout.read().strip()
            s_built = subprocess.Popen(['find', os.path.join(pacdir, 'SRPMS'),
                                        '-name', '*.rpm'],
                                       stdout=subprocess.PIPE).stdout.read().strip()
    elif buildtype == 'kiwi':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'KIWI'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'docker':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'DOCKER'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'podman':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'DOCKER'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'fissile':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'FISSILE'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'dsc' or buildtype == 'collax':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'DEBS'),
                                    '-name', '*.deb'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = subprocess.Popen(['find', os.path.join(pacdir, 'SOURCES.DEB'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
    elif buildtype == 'arch':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'ARCHPKGS'),
                                    '-name', '*.pkg.tar*'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'livebuild':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'OTHER'),
                                    '-name', '*.iso*'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'helm':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'HELM'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'snapcraft':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'OTHER'),
                                    '-name', '*.snap'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'appimage':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'OTHER'),
                                    '-name', '*.AppImage'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'simpleimage':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'OTHER'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'flatpak':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'OTHER'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    elif buildtype == 'preinstallimage':
        b_built = subprocess.Popen(['find', os.path.join(pacdir, 'OTHER'),
                                    '-type', 'f'],
                                   stdout=subprocess.PIPE).stdout.read().strip()
        s_built = ''
    else:
        print('WARNING: Unknown package type \'%s\'.' % buildtype, file=sys.stderr)
        b_built = ''
        s_built = ''
    return s_built, b_built


def get_repo(path):
    """Walks up path looking for any repodata directories.

    :param path: path to a directory
    :return: path to repository directory containing repodata directory
    :rtype: str
    """
    oldDirectory = None
    currentDirectory = os.path.abspath(path)
    repositoryDirectory = None

    # while there are still parent directories
    while currentDirectory != oldDirectory:
        children = os.listdir(currentDirectory)

        if "repodata" in children:
            repositoryDirectory = currentDirectory
            break

        # ascend
        oldDirectory = currentDirectory
        currentDirectory = os.path.abspath(os.path.join(oldDirectory,
                                                        os.pardir))

    return repositoryDirectory


def get_prefer_pkgs(dirs, wanted_arch, type, cpio):
    paths = []
    repositories = []

    suffix = '*.rpm'
    if type == 'dsc' or type == 'collax' or type == 'livebuild':
        suffix = '*.deb'
    elif type == 'arch':
        suffix = '*.pkg.tar.*'

    for dir in dirs:
        # check for repodata
        repository = get_repo(dir)
        if repository is None:
            paths += glob.glob(os.path.join(os.path.abspath(dir), suffix))
        else:
            repositories.append(repository)

    packageQueries = packagequery.PackageQueries(wanted_arch)

    for repository in repositories:
        repodataPackageQueries = repodata.queries(repository)

        for packageQuery in repodataPackageQueries:
            packageQueries.add(packageQuery)

    for path in paths:
        if path.endswith('.src.rpm') or path.endswith('.nosrc.rpm'):
            continue
        if path.endswith('.patch.rpm') or path.endswith('.delta.rpm'):
            continue
        packageQuery = packagequery.PackageQuery.query(path)
        packageQueries.add(packageQuery)

    prefer_pkgs = {decode_it(name): packageQuery.path()
                   for name, packageQuery in packageQueries.items()}

    depfile = create_deps(packageQueries.values())
    cpio.add(b'deps', b'\n'.join(depfile))
    return prefer_pkgs


def create_deps(pkgqs):
    """
    creates a list of dependencies which corresponds to build's internal
    dependency file format
    """
    depfile = []
    for p in pkgqs:
        id = b'%s.%s-0/0/0: ' % (p.name(), p.arch())
        depfile.append(b'P:%s%s' % (id, b' '.join(p.provides())))
        depfile.append(b'R:%s%s' % (id, b' '.join(p.requires())))
        d = p.conflicts()
        if d:
            depfile.append(b'C:%s%s' % (id, b' '.join(d)))
        d = p.obsoletes()
        if d:
            depfile.append(b'O:%s%s' % (id, b' '.join(d)))
        d = p.recommends()
        if d:
            depfile.append(b'r:%s%s' % (id, b' '.join(d)))
        d = p.supplements()
        if d:
            depfile.append(b's:%s%s' % (id, b' '.join(d)))
        depfile.append(b'I:%s%s-%s 0-%s' % (id, p.name(), p.evr(), p.arch()))
    return depfile


trustprompt = """Would you like to ...
0 - quit (default)
1 - always trust packages from '%(project)s'
2 - trust packages just this time
? """


def check_trusted_projects(apiurl, projects):
    trusted = config['api_host_options'][apiurl]['trusted_prj']
    tlen = len(trusted)
    for prj in projects:
        if prj not in trusted:
            print("\nThe build root needs packages from project '%s'." % prj)
            print("Note that malicious packages can compromise the build result or even your system.")
            r = raw_input(trustprompt % {'project': prj})
            if r == '1':
                print("adding '%s' to oscrc: ['%s']['trusted_prj']" % (prj, apiurl))
                trusted.append(prj)
            elif r != '2':
                print("Well, goodbye then :-)")
                raise oscerr.UserAbort()

    if tlen != len(trusted):
        config['api_host_options'][apiurl]['trusted_prj'] = trusted
        conf.config_set_option(apiurl, 'trusted_prj', ' '.join(trusted))


def get_kiwipath_from_buildinfo(bi, prj, repo):
    # If the project does not have a path defined we need to get the config
    # via the repositories in the kiwi file. Unfortunately the buildinfo
    # does not include a hint if this is the case, so we rely on a heuristic
    # here: if the path list contains our own repo, it probably does not
    # come from the kiwi file and thus a path is defined in the config.
    # It is unlikely that our own repo is included in the kiwi file, as it
    # contains no packages.
    myprp = prj + '/' + repo
    if myprp in bi.pathes:
        return None
    kiwipath = bi.pathes
    kiwipath.insert(0, myprp)
    return kiwipath


def calculate_prj_pac(opts, descr):
    project = opts.alternative_project or store_read_project('.')
    if opts.local_package:
        package = os.path.splitext(os.path.basename(descr))[0]
    else:
        package = store_read_package('.')
    return project, package


def calculate_build_root(apihost, prj, pac, repo, arch):
    buildroot = os.environ.get('OSC_BUILD_ROOT', config['build-root']) \
        % {'repo': repo, 'arch': arch, 'project': prj, 'package': pac, 'apihost': apihost}
    return buildroot


def build_as_user():
    if os.environ.get('OSC_SU_WRAPPER', config['su-wrapper']).split():
        return False
    return True


def su_wrapper(cmd):
    sucmd = os.environ.get('OSC_SU_WRAPPER', config['su-wrapper']).split()
    if sucmd:
        if sucmd[0] == 'su':
            if sucmd[-1] == '-c':
                sucmd.pop()
            cmd = sucmd + ['-s', cmd[0], 'root', '--'] + cmd[1:]
        else:
            cmd = sucmd + cmd
    return cmd


def run_build(opts, *args):
    cmd = [config['build-cmd']]
    cmd += args

    cmd = su_wrapper(cmd)

    if not opts.userootforbuild:
        cmd.append('--norootforbuild')
    return run_external(cmd[0], *cmd[1:])


def main(apiurl, opts, argv):

    repo = argv[0]
    arch = argv[1]
    build_descr = argv[2]
    xp = []
    build_root = None
    cache_dir = None
    build_uid = ''
    build_shell_after_fail = config['build-shell-after-fail']
    vm_memory = config['build-memory']
    vm_disk_size = config['build-vmdisk-rootsize']
    vm_type = config['build-type']
    vm_telnet = None

    build_descr = os.path.abspath(build_descr)
    build_type = os.path.splitext(build_descr)[1][1:]
    if os.path.basename(build_descr) == 'PKGBUILD':
        build_type = 'arch'
    if os.path.basename(build_descr) == 'build.collax':
        build_type = 'collax'
    if os.path.basename(build_descr) == 'appimage.yml':
        build_type = 'appimage'
    if os.path.basename(build_descr) == 'Chart.yaml':
        build_type = 'helm'
    if os.path.basename(build_descr) == 'snapcraft.yaml':
        build_type = 'snapcraft'
    if os.path.basename(build_descr) == 'simpleimage':
        build_type = 'simpleimage'
    if os.path.basename(build_descr) == 'Dockerfile':
        build_type = 'docker'
    if os.path.basename(build_descr) == 'fissile.yml':
        build_type = 'fissile'
    if os.path.basename(build_descr) == '_preinstallimage':
        build_type = 'preinstallimage'
    if build_descr.endswith('flatpak.yaml') or build_descr.endswith('flatpak.yml') or build_descr.endswith('flatpak.json'):
        build_type = 'flatpak'
    if build_type not in ['spec', 'dsc', 'kiwi', 'arch', 'collax', 'livebuild',
                          'simpleimage', 'snapcraft', 'appimage', 'docker', 'helm',
                          'podman', 'fissile', 'flatpak', 'preinstallimage']:
        raise oscerr.WrongArgs(
            'Unknown build type: \'%s\'. '
            'Build description should end in .spec, .dsc, .kiwi, or .livebuild. '
            'Or being named PKGBUILD, build.collax, simpleimage, appimage.yml, '
            'Chart.yaml, snapcraft.yaml, flatpak.json, flatpak.yml, flatpak.yaml, '
            'preinstallimage or Dockerfile' % build_type)

    if not os.path.isfile(build_descr):
        raise oscerr.WrongArgs('Error: build description file named \'%s\' does not exist.' % build_descr)

    buildargs = []
    buildargs.append('--statistics')
    if not opts.userootforbuild:
        buildargs.append('--norootforbuild')
    if opts.clean:
        buildargs.append('--clean')
    if opts.nochecks:
        buildargs.append('--no-checks')
    if not opts.no_changelog:
        buildargs.append('--changelog')
    if opts.root:
        build_root = opts.root
    if opts.target:
        buildargs.append('--target=%s' % opts.target)
    if opts.threads:
        buildargs.append('--threads=%s' % opts.threads)
    if opts.jobs:
        buildargs.append('--jobs=%s' % opts.jobs)
    elif config['build-jobs'] > 1:
        buildargs.append('--jobs=%s' % config['build-jobs'])
    if opts.icecream or config['icecream'] != '0':
        if opts.icecream:
            num = opts.icecream
        else:
            num = config['icecream']

        if int(num) > 0:
            buildargs.append('--icecream=%s' % num)
            xp.append('icecream')
            xp.append('gcc-c++')
    if opts.ccache or config['ccache']:
        buildargs.append('--ccache')
        xp.append('ccache')
    if opts.pkg_ccache:
        buildargs.append('--pkg-ccache=%s' % opts.pkg_ccache)
        xp.append('ccache')
    if opts.linksources:
        buildargs.append('--linksources')
    if opts.baselibs:
        buildargs.append('--baselibs')
    if opts.debuginfo:
        buildargs.append('--debug')
    if opts._with:
        for o in opts._with:
            buildargs.append('--with=%s' % o)
    if opts.without:
        for o in opts.without:
            buildargs.append('--without=%s' % o)
    if opts.define:
        for o in opts.define:
            buildargs.append('--define=%s' % o)
    if config['build-uid']:
        build_uid = config['build-uid']
    if opts.build_uid:
        build_uid = opts.build_uid
    if build_uid:
        buildidre = re.compile('^[0-9]+:[0-9]+$')
        if build_uid == 'caller':
            buildargs.append('--uid=%s:%s' % (os.getuid(), os.getgid()))
        elif buildidre.match(build_uid):
            buildargs.append('--uid=%s' % build_uid)
        else:
            print('Error: build-uid arg must be 2 colon separated numerics: "uid:gid" or "caller"', file=sys.stderr)
            return 1
    if opts.shell_after_fail:
        build_shell_after_fail = opts.shell_after_fail
    if opts.vm_memory:
        vm_memory = opts.vm_memory
    if opts.vm_disk_size:
        vm_disk_size = opts.vm_disk_size
    if opts.vm_type:
        vm_type = opts.vm_type
    if opts.vm_telnet:
        vm_telnet = opts.vm_telnet
    if opts.alternative_project:
        prj = opts.alternative_project
        pac = '_repository'
    else:
        prj = store_read_project(os.curdir)
        if opts.local_package:
            pac = '_repository'
        else:
            pac = store_read_package(os.curdir)
    if opts.multibuild_package:
        buildargs.append('--buildflavor=%s' % opts.multibuild_package)
        pac = pac + ":" + opts.multibuild_package
    if opts.verbose:
        buildargs.append('--verbose=%s' % opts.verbose)
    if opts.wipe:
        buildargs.append("--wipe")

    orig_build_root = config['build-root']
    # make it possible to override configuration of the rc file
    for var in ['OSC_PACKAGECACHEDIR', 'OSC_SU_WRAPPER', 'OSC_BUILD_ROOT']:
        val = os.getenv(var)
        if val:
            if var.startswith('OSC_'):
                var = var[4:]
            var = var.lower().replace('_', '-')
            if var in config:
                print('Overriding config value for %s=\'%s\' with \'%s\'' % (var, config[var], val))
            config[var] = val

    pacname = pac
    if pacname == '_repository':
        if not opts.local_package:
            try:
                pacname = store_read_package(os.curdir)
            except oscerr.NoWorkingCopy:
                opts.local_package = True
        if opts.local_package:
            pacname = os.path.splitext(os.path.basename(build_descr))[0]
    apihost = urlsplit(apiurl)[1]
    if not build_root:
        build_root = config['build-root']
        if build_root == orig_build_root:
            # ENV var was not set
            build_root = config['api_host_options'][apiurl].get('build-root', build_root)
        try:
            build_root = build_root % {'repo': repo, 'arch': arch,
                                       'project': prj, 'package': pacname, 'apihost': apihost}
        except:
            pass

    # We configure sccache after pacname, so that in default cases we can have an sccache for each
    # package to prevent cross-cache polutions. It helps to make the local-use case a bit nicer.
    if opts.sccache_uri or config['sccache_uri'] or opts.sccache or config['sccache']:
        if opts.pkg_ccache or opts.ccache or config['ccache']:
            raise oscerr.WrongArgs('Error: sccache and ccache can not be enabled at the same time')
        sccache_arg = "--sccache-uri=/var/tmp/osbuild-sccache-{pkgname}.tar"
        if opts.sccache_uri:
            sccache_arg = '--sccache-uri=%s' % opts.sccache_uri
        elif config['sccache_uri']:
            sccache_arg = '--sccache-uri=%s' % config['sccache_uri']
        # Format the package name.
        sccache_arg = sccache_arg.format(pkgname=pacname)
        buildargs.append(sccache_arg)
        xp.append('sccache')

    # define buildinfo & config local cache
    bi_file = None
    bc_file = None
    bi_filename = '_buildinfo-%s-%s.xml' % (repo, arch)
    bc_filename = '_buildconfig-%s-%s' % (repo, arch)
    if is_package_dir('.') and os.access(core.store, os.W_OK):
        bi_filename = os.path.join(os.getcwd(), core.store, bi_filename)
        bc_filename = os.path.join(os.getcwd(), core.store, bc_filename)
    elif not os.access('.', os.W_OK):
        bi_file = NamedTemporaryFile(prefix=bi_filename)
        bi_filename = bi_file.name
        bc_file = NamedTemporaryFile(prefix=bc_filename)
        bc_filename = bc_file.name
    else:
        bi_filename = os.path.abspath(bi_filename)
        bc_filename = os.path.abspath(bc_filename)

    if opts.shell:
        buildargs.append("--shell")

    if build_shell_after_fail:
        buildargs.append("--shell-after-fail")

    if opts.shell_cmd:
        buildargs.append("--shell-cmd")
        buildargs.append(opts.shell_cmd)

    if opts.noinit:
        buildargs.append('--noinit')

    if not is_package_dir('.'):
        opts.noservice = True

    # check for source services
    if not opts.offline and not opts.noservice:
        p = core.Package(os.curdir)
        r = p.run_source_services(verbose=True)
        if r:
            raise oscerr.ServiceRuntimeError('Source service run failed!')

    cache_dir = config['packagecachedir'] % {'apihost': apihost}

    extra_pkgs = []
    if not opts.extra_pkgs:
        extra_pkgs = config['extra-pkgs']
    elif opts.extra_pkgs != ['']:
        extra_pkgs = opts.extra_pkgs

    if xp:
        extra_pkgs += xp

    prefer_pkgs = {}
    build_descr_data = open(build_descr, 'rb').read()

    # XXX: dirty hack but there's no api to provide custom defines
    if opts.without:
        s = ''
        for i in opts.without:
            s += "%%define _without_%s 1\n" % i
        build_descr_data = s.encode() + build_descr_data
    if opts._with:
        s = ''
        for i in opts._with:
            s += "%%define _with_%s 1\n" % i
        build_descr_data = s.encode() + build_descr_data
    if opts.define:
        s = ''
        for i in opts.define:
            s += "%%define %s\n" % i
        build_descr_data = s.encode() + build_descr_data

    cpiodata = None
    servicefile = os.path.join(os.path.dirname(build_descr), "_service")
    if not os.path.isfile(servicefile):
        servicefile = os.path.join(os.path.dirname(build_descr), "_service")
        if not os.path.isfile(servicefile):
            servicefile = None
        else:
            print('Using local _service file')
    buildenvfile = os.path.join(os.path.dirname(build_descr), "_buildenv." + repo + "." + arch)
    if not os.path.isfile(buildenvfile):
        buildenvfile = os.path.join(os.path.dirname(build_descr), "_buildenv")
        if not os.path.isfile(buildenvfile):
            buildenvfile = None
        else:
            print('Using local buildenv file: %s' % os.path.basename(buildenvfile))
    if buildenvfile or servicefile:
        if not cpiodata:
            cpiodata = cpio.CpioWrite()

    if opts.prefer_pkgs:
        print('Scanning the following dirs for local packages: %s' % ', '.join(opts.prefer_pkgs))
        if not cpiodata:
            cpiodata = cpio.CpioWrite()
        prefer_pkgs = get_prefer_pkgs(opts.prefer_pkgs, arch, build_type, cpiodata)

    if cpiodata:
        cpiodata.add(os.path.basename(build_descr.encode()), build_descr_data)
        # buildenv must come last for compatibility reasons...
        if buildenvfile:
            cpiodata.add(b"buildenv", open(buildenvfile, 'rb').read())
        if servicefile:
            cpiodata.add(b"_service", open(servicefile, 'rb').read())
        build_descr_data = cpiodata.get()

    # special handling for overlay and rsync-src/dest
    specialcmdopts = []
    if opts.rsyncsrc or opts.rsyncdest:
        if not opts.rsyncsrc or not opts.rsyncdest:
            raise oscerr.WrongOptions('When using --rsync-{src,dest} both parameters have to be specified.')
        myrsyncsrc = os.path.abspath(os.path.expanduser(os.path.expandvars(opts.rsyncsrc)))
        if not os.path.isdir(myrsyncsrc):
            raise oscerr.WrongOptions('--rsync-src %s is no valid directory!' % opts.rsyncsrc)
        # can't check destination - its in the target chroot ;) - but we can check for sanity
        myrsyncdest = os.path.expandvars(opts.rsyncdest)
        if not os.path.isabs(myrsyncdest):
            raise oscerr.WrongOptions('--rsync-dest %s is no absolute path (starting with \'/\')!' % opts.rsyncdest)
        specialcmdopts = ['--rsync-src=' + myrsyncsrc, '--rsync-dest=' + myrsyncdest]
    if opts.overlay:
        myoverlay = os.path.abspath(os.path.expanduser(os.path.expandvars(opts.overlay)))
        if not os.path.isdir(myoverlay):
            raise oscerr.WrongOptions('--overlay %s is no valid directory!' % opts.overlay)
        specialcmdopts += ['--overlay=' + myoverlay]

    try:
        if opts.noinit:
            if not os.path.isfile(bi_filename):
                raise oscerr.WrongOptions('--noinit is not possible, no local buildinfo file')
            print('Use local \'%s\' file as buildinfo' % bi_filename)
            if not os.path.isfile(bc_filename):
                raise oscerr.WrongOptions('--noinit is not possible, no local buildconfig file')
            print('Use local \'%s\' file as buildconfig' % bc_filename)
        elif opts.offline:
            if not os.path.isfile(bi_filename):
                raise oscerr.WrongOptions('--offline is not possible, no local buildinfo file')
            print('Use local \'%s\' file as buildinfo' % bi_filename)
            if not os.path.isfile(bc_filename):
                raise oscerr.WrongOptions('--offline is not possible, no local buildconfig file')
        else:
            print('Getting buildconfig from server and store to %s' % bc_filename)
            bc = get_buildconfig(apiurl, prj, repo)
            if not bc_file:
                bc_file = open(bc_filename, 'w')
            bc_file.write(decode_it(bc))
            bc_file.flush()
            if os.path.exists('/usr/lib/build/queryconfig') and not opts.nodebugpackages:
                debug_pkgs = decode_it(return_external('/usr/lib/build/queryconfig', '--dist', bc_filename, 'substitute', 'obs:cli_debug_packages'))
                if len(debug_pkgs) > 0:
                    extra_pkgs += debug_pkgs.strip().split(" ")

            print('Getting buildinfo from server and store to %s' % bi_filename)
            bi_text = decode_it(get_buildinfo(apiurl,
                                              prj,
                                              pac,
                                              repo,
                                              arch,
                                              specfile=build_descr_data,
                                              addlist=extra_pkgs))
            if not bi_file:
                bi_file = open(bi_filename, 'w')
            # maybe we should check for errors before saving the file
            bi_file.write(bi_text)
            bi_file.flush()
            kiwipath = None
            if build_type == 'kiwi':
                bi = Buildinfo(bi_filename, apiurl, 'kiwi', list(prefer_pkgs.keys()))
                kiwipath = get_kiwipath_from_buildinfo(bi, prj, repo)
                bc = get_buildconfig(apiurl, prj, repo, kiwipath)
                bc_file.seek(0)
                bc_file.write(decode_it(bc))
                bc_file.flush()
    except HTTPError as e:
        if e.code == 404:
            # check what caused the 404
            if meta_exists(metatype='prj', path_args=(quote_plus(prj), ),
                           template_args=None, create_new=False, apiurl=apiurl):
                pkg_meta_e = None
                try:
                    # take care, not to run into double trouble.
                    pkg_meta_e = meta_exists(metatype='pkg', path_args=(quote_plus(prj),
                                                                        quote_plus(pac)), template_args=None, create_new=False,
                                             apiurl=apiurl)
                except:
                    pass

                if pkg_meta_e:
                    print('ERROR: Either wrong repo/arch as parameter or a parse error of .spec/.dsc/.kiwi file due to syntax error', file=sys.stderr)
                else:
                    print('The package \'%s\' does not exist - please '
                          'rerun with \'--local-package\'' % pac, file=sys.stderr)
            else:
                print('The project \'%s\' does not exist - please '
                      'rerun with \'--alternative-project <alternative_project>\'' % prj, file=sys.stderr)
            sys.exit(1)
        else:
            raise

    # Set default binary type if cannot be detected
    binary_type = 'rpm'
    if os.path.exists('/usr/lib/build/queryconfig'):
        binary_type = decode_it(return_external('/usr/lib/build/queryconfig', '--dist', bc_filename, 'binarytype')).strip()
    # If binary type is set to a useless value, reset to 'rpm'
    if binary_type == 'UNDEFINED':
        binary_type = 'rpm'

    bi = Buildinfo(bi_filename, apiurl, build_type, list(prefer_pkgs.keys()), binary_type)

    if bi.debuginfo and not (opts.disable_debuginfo or '--debug' in buildargs):
        buildargs.append('--debug')

    if opts.release:
        bi.release = opts.release

    if bi.release:
        buildargs.append('--release')
        buildargs.append(bi.release)

    if opts.stage:
        buildargs.append('--stage')
        buildargs.append(opts.stage)

    if opts.build_opt:
        buildargs += opts.build_opt

    # real arch of this machine
    # vs.
    # arch we are supposed to build for
    if vm_type != "emulator" and vm_type != "qemu":
        if bi.hostarch is not None:
            if hostarch != bi.hostarch and bi.hostarch not in can_also_build.get(hostarch, []):
                print('Error: hostarch \'%s\' is required.' % (bi.hostarch), file=sys.stderr)
                return 1
        elif hostarch != bi.buildarch:
            if bi.buildarch not in can_also_build.get(hostarch, []):
                print('WARNING: It is guessed to build on hostarch \'%s\' for \'%s\' via QEMU user emulation.' % (hostarch, bi.buildarch), file=sys.stderr)

    rpmlist_prefers = []
    if prefer_pkgs:
        print('Evaluating preferred packages')
        for name, path in prefer_pkgs.items():
            if bi.has_dep(name):
                # We remove a preferred package from the buildinfo, so that the
                # fetcher doesn't take care about them.
                # Instead, we put it in a list which is appended to the rpmlist later.
                # At the same time, this will make sure that these packages are
                # not verified.
                bi.remove_dep(name)
                rpmlist_prefers.append((name, path))
                print(' - %s (%s)' % (name, path))

    print('Updating cache of required packages')

    urllist = []
    if not opts.download_api_only:
        # transform 'url1, url2, url3' form into a list
        if 'urllist' in config:
            if isinstance(config['urllist'], str):
                re_clist = re.compile('[, ]+')
                urllist = [i.strip() for i in re_clist.split(config['urllist'].strip())]
            else:
                urllist = config['urllist']

        # OBS 1.5 and before has no downloadurl defined in buildinfo, but it is obsolete again meanwhile.
        # we have now specific download repositories per repository. Could be removed IMHO, since the api fallback
        # is there. In worst case it could fetch the wrong rpm...
        if bi.downloadurl:
            urllist.append(bi.downloadurl.replace('%', '%%') + '/%(extproject)s/%(extrepository)s/%(arch)s/%(filename)s')
    if opts.disable_cpio_bulk_download:
        urllist.append('%(apiurl)s/build/%(project)s/%(repository)s/%(repoarch)s/%(repopackage)s/%(repofilename)s')

    fetcher = Fetcher(cache_dir,
                      urllist=urllist,
                      offline=opts.noinit or opts.offline,
                      http_debug=config['http_debug'],
                      modules=bi.modules,
                      enable_cpio=not opts.disable_cpio_bulk_download and bi.enable_cpio,
                      cookiejar=connection.CookieJarAuthHandler(apiurl, os.path.expanduser(conf.config["cookiejar"]))._cookiejar,
                      download_api_only=opts.download_api_only)

    if not opts.trust_all_projects:
        # implicitly trust the project we are building for
        check_trusted_projects(apiurl, [i for i in bi.projects.keys() if not i == prj])

    imagefile = ''
    imagesource = ''
    imagebins = []
    if build_as_user():
        # preinstallimage extraction will fail
        bi.preinstallimage = None
    if build_type == 'preinstallimage':
        # preinstallimage would repackage just the previously built preinstallimage
        bi.preinstallimage = None

    if (not config['no_preinstallimage'] and not opts.nopreinstallimage and
        bi.preinstallimage and
        not opts.noinit and
        (opts.clean or (not os.path.exists(build_root + "/installed-pkg") and
                        not os.path.exists(build_root + "/.build/init_buildsystem.data")))):
        (imagefile, imagesource, imagebins) = get_preinstall_image(apiurl, arch, cache_dir, bi.preinstallimage,
                                                                   opts.offline)
        if imagefile:
            # remove binaries from build deps which are included in preinstall image
            for i in bi.deps:
                if i.name in imagebins:
                    bi.remove_dep(i.name)

    # now update the package cache
    fetcher.run(bi)

    old_pkg_dir = None
    if opts.oldpackages:
        old_pkg_dir = opts.oldpackages
        if not old_pkg_dir.startswith('/') and not opts.offline:
            data = [prj, pacname, repo, arch]
            if old_pkg_dir == '_link':
                p = core.Package(os.curdir)
                if not p.islink():
                    raise oscerr.WrongOptions('package is not a link')
                data[0] = p.linkinfo.project
                data[1] = p.linkinfo.package
                repos = core.get_repositories_of_project(apiurl, data[0])
                # hack for links to e.g. Factory
                if not data[2] in repos and 'standard' in repos:
                    data[2] = 'standard'
            elif old_pkg_dir != '' and old_pkg_dir != '_self':
                a = old_pkg_dir.split('/')
                for i in range(0, len(a)):
                    data[i] = a[i]

            destdir = os.path.join(cache_dir, data[0], data[2], data[3])
            old_pkg_dir = None
            try:
                print("Downloading previous build from %s ..." % '/'.join(data))
                binaries = get_binarylist(apiurl, data[0], data[2], data[3], package=data[1], verbose=True)
            except Exception as e:
                print("Error: failed to get binaries: %s" % str(e))
                binaries = []

            if binaries:
                class mytmpdir:
                    """ temporary directory that removes itself"""

                    def __init__(self, *args, **kwargs):
                        self.name = mkdtemp(*args, **kwargs)
                    _rmtree = staticmethod(shutil.rmtree)

                    def cleanup(self):
                        self._rmtree(self.name)

                    def __del__(self):
                        self.cleanup()

                    def __exit__(self):
                        self.cleanup()

                    def __str__(self):
                        return self.name

                old_pkg_dir = mytmpdir(prefix='.build.oldpackages', dir=os.path.abspath(os.curdir))
                if not os.path.exists(destdir):
                    os.makedirs(destdir)
            for i in binaries:
                fname = os.path.join(destdir, i.name)
                os.symlink(fname, os.path.join(str(old_pkg_dir), i.name))
                if os.path.exists(fname):
                    st = os.stat(fname)
                    if st.st_mtime == i.mtime and st.st_size == i.size:
                        continue
                get_binary_file(apiurl,
                                data[0],
                                data[2], data[3],
                                i.name,
                                package=data[1],
                                target_filename=fname,
                                target_mtime=i.mtime,
                                progress_meter=True)

        if old_pkg_dir is not None:
            buildargs.append('--oldpackages=%s' % old_pkg_dir)

    # Make packages from buildinfo available as repos for kiwi/docker/fissile
    if build_type == 'kiwi' or build_type == 'docker' or build_type == 'podman' or build_type == 'fissile':
        if os.path.exists('repos'):
            shutil.rmtree('repos')
        if os.path.exists('containers'):
            shutil.rmtree('containers')
        os.mkdir('repos')
        for i in bi.deps:
            if not i.extproject:
                # remove
                bi.deps.remove(i)
                continue
            if i.notmeta:
                continue
            # project
            pdir = str(i.extproject).replace(':/', ':')
            # repo
            rdir = str(i.extrepository).replace(':/', ':')
            # arch
            adir = i.repoarch
            # source fullfilename
            sffn = i.fullfilename
            filename = sffn.split("/")[-1]
            # project/repo
            if i.name.startswith("container:"):
                prdir = "containers/" + pdir + "/" + rdir
                pradir = prdir
                filename = filename[10:]
                if build_type == 'kiwi':
                    buildargs.append('--kiwi-parameter')
                    buildargs.append('--set-container-derived-from=dir://./' + prdir + "/" + filename)
            else:
                prdir = "repos/" + pdir + "/" + rdir
                # project/repo/arch
                pradir = prdir + "/" + adir
            # target fullfilename
            tffn = pradir + "/" + filename
            if not os.path.exists(os.path.join(pradir)):
                os.makedirs(os.path.join(pradir))
            if not os.path.exists(tffn):
                print("Using package: " + sffn)
                if opts.linksources:
                    os.link(sffn, tffn)
                else:
                    os.symlink(sffn, tffn)
            if prefer_pkgs:
                for name, path in prefer_pkgs.items():
                    if name == filename:
                        print("Using prefered package: " + path + "/" + filename)
                        os.unlink(tffn)
                        if opts.linksources:
                            os.link(path + "/" + filename, tffn)
                        else:
                            os.symlink(path + "/" + filename, tffn)

    if build_type == 'kiwi':
        # Is a obsrepositories tag used?
        try:
            tree = ET.parse(build_descr)
        except:
            print('could not parse the kiwi file:', file=sys.stderr)
            print(open(build_descr).read(), file=sys.stderr)
            sys.exit(1)
        root = tree.getroot()

        # product
        if root.find('instsource'):
            # leads to unsigned media, but avoids build failure
            buildargs.append('--signdummy')

        for xml in root.findall('instsource'):
            found_obsrepositories = 0
            for node in xml.findall('instrepo'):
                if node and node.find('source').get('path') == 'obsrepositories:/':
                    for path in bi.pathes:
                        found_obsrepositories += 1
                        new_node = ET.SubElement(xml, 'instrepo')
                        new_node.set('name', node.get('name') + "_" + str(found_obsrepositories))
                        new_node.set('priority', node.get('priority'))
                        new_node.set('local', 'true')
                        new_source_node = ET.SubElement(new_node, 'source')
                        new_source_node.set('path', "obs://" + path)
                    xml.remove(node)

            if found_obsrepositories > 0:
                build_descr = os.getcwd() + '/_service:osc_obsrepositories:' + build_descr.rsplit('/', 1)[-1]
                tree.write(open(build_descr, 'wb'))

        # appliance
        expand_obsrepos = None
        for xml in root.findall('repository'):
            if xml.find('source').get('path') == 'obsrepositories:/':
                expand_obsrepos = True
        if expand_obsrepos:
            buildargs.append('--kiwi-parameter')
            buildargs.append('--ignore-repos')
            for xml in root.findall('repository'):
                if xml.find('source').get('path') == 'obsrepositories:/':
                    for path in bi.pathes:
                        if not os.path.isdir("repos/" + path):
                            continue
                        buildargs.append('--kiwi-parameter')
                        buildargs.append('--add-repo')
                        buildargs.append('--kiwi-parameter')
                        buildargs.append("dir://./repos/" + path)
                        buildargs.append('--kiwi-parameter')
                        buildargs.append('--add-repotype')
                        buildargs.append('--kiwi-parameter')
                        buildargs.append('rpm-md')
                        if xml.get('priority'):
                            buildargs.append('--kiwi-parameter')
                            buildargs.append('--add-repoprio=' + xml.get('priority'))
                else:
                    m = re.match(r"obs://[^/]+/([^/]+)/(\S+)", xml.find('source').get('path'))
                    if not m:
                        # short path without obs instance name
                        m = re.match(r"obs://([^/]+)/(.+)", xml.find('source').get('path'))
                    project = m.group(1).replace(":", ":/")
                    repo = m.group(2)
                    buildargs.append('--kiwi-parameter')
                    buildargs.append('--add-repo')
                    buildargs.append('--kiwi-parameter')
                    buildargs.append("dir://./repos/" + project + "/" + repo)
                    buildargs.append('--kiwi-parameter')
                    buildargs.append('--add-repotype')
                    buildargs.append('--kiwi-parameter')
                    buildargs.append('rpm-md')
                    if xml.get('priority'):
                        buildargs.append('--kiwi-parameter')
                        buildargs.append('--add-repopriority=' + xml.get('priority'))

    if vm_type == "xen" or vm_type == "kvm" or vm_type == "lxc" or vm_type == "nspawn":
        print('Skipping verification of package signatures due to secure VM build')
    elif bi.pacsuffix == 'rpm':
        if opts.no_verify:
            print('Skipping verification of package signatures')
        else:
            print('Verifying integrity of cached packages')
            verify_pacs(bi)
    elif bi.pacsuffix == 'deb':
        if opts.no_verify or opts.noinit:
            print('Skipping verification of package signatures')
        else:
            print('WARNING: deb packages get not verified, they can compromise your system !')
    else:
        print('WARNING: unknown packages get not verified, they can compromise your system !')

    for i in bi.deps:
        if i.hdrmd5:
            if not i.name.startswith('container:') and i.pacsuffix != 'rpm':
                continue
            if i.name.startswith('container:'):
                hdrmd5 = dgst(i.fullfilename)
            else:
                hdrmd5 = packagequery.PackageQuery.queryhdrmd5(i.fullfilename)
            if not hdrmd5:
                print("Error: cannot get hdrmd5 for %s" % i.fullfilename)
                sys.exit(1)
            if hdrmd5 != i.hdrmd5:
                print("Error: hdrmd5 mismatch for %s: %s != %s" % (i.fullfilename, hdrmd5, i.hdrmd5))
                sys.exit(1)

    print('Writing build configuration')

    if build_type == 'kiwi' or build_type == 'docker' or build_type == 'podman' or build_type == 'fissile':
        rpmlist = ['%s %s\n' % (i.name, i.fullfilename) for i in bi.deps if not i.noinstall]
    else:
        rpmlist = []
        for dep in bi.deps:
            if dep.sysroot:
                # packages installed in sysroot subdirectory need to get a prefix for init_buildsystem
                rpmlist.append('sysroot: %s %s\n' % (dep.name, dep.fullfilename))
            else:
                rpmlist.append('%s %s\n' % (dep.name, dep.fullfilename))
    for i in imagebins:
        rpmlist.append('%s preinstallimage\n' % i)
    rpmlist += ['%s %s\n' % (i[0], i[1]) for i in rpmlist_prefers]

    if imagefile:
        rpmlist.append('preinstallimage: %s\n' % imagefile)
    if imagesource:
        rpmlist.append('preinstallimagesource: %s\n' % imagesource)

    rpmlist.append('preinstall: ' + ' '.join(bi.preinstall_list) + '\n')
    rpmlist.append('vminstall: ' + ' '.join(bi.vminstall_list) + '\n')
    rpmlist.append('runscripts: ' + ' '.join(bi.runscripts_list) + '\n')
    if build_type != 'kiwi' and build_type != 'docker' and build_type != 'podman' and build_type != 'fissile':
        if bi.noinstall_list:
            rpmlist.append('noinstall: ' + ' '.join(bi.noinstall_list) + '\n')
        if bi.installonly_list:
            rpmlist.append('installonly: ' + ' '.join(bi.installonly_list) + '\n')

    rpmlist_file = NamedTemporaryFile(mode='w+t', prefix='rpmlist.')
    rpmlist_filename = rpmlist_file.name
    rpmlist_file.writelines(rpmlist)
    rpmlist_file.flush()

    subst = {'repo': repo, 'arch': arch, 'project': prj, 'package': pacname}
    vm_options = []
    # XXX check if build-device present
    my_build_device = ''
    if config['build-device']:
        my_build_device = config['build-device'] % subst
    else:
        # obs worker uses /root here but that collides with the
        # /root directory if the build root was used without vm
        # before
        my_build_device = build_root + '/img'

    if vm_type:
        if config['build-swap']:
            my_build_swap = config['build-swap'] % subst
        else:
            my_build_swap = build_root + '/swap'

        vm_options = ['--vm-type=%s' % vm_type]
        if vm_telnet:
            vm_options += ['--vm-telnet=' + vm_telnet]
        if vm_memory:
            vm_options += ['--memory=' + vm_memory]
        if vm_type != 'lxc' and vm_type != 'nspawn':
            vm_options += ['--vm-disk=' + my_build_device]
            vm_options += ['--vm-swap=' + my_build_swap]
            vm_options += ['--logfile=%s/.build.log' % build_root]
            if vm_type == 'kvm':
                if config['build-kernel']:
                    vm_options += ['--vm-kernel=' + config['build-kernel']]
                if config['build-initrd']:
                    vm_options += ['--vm-initrd=' + config['build-initrd']]

            build_root += '/.mount'
        if vm_disk_size:
            vm_options += ['--vmdisk-rootsize=' + vm_disk_size]

        if config['build-vmdisk-swapsize']:
            vm_options += ['--vmdisk-swapsize=' + config['build-vmdisk-swapsize']]
        if config['build-vmdisk-filesystem']:
            vm_options += ['--vmdisk-filesystem=' + config['build-vmdisk-filesystem']]
        if config['build-vm-user']:
            vm_options += ['--vm-user=' + config['build-vm-user']]

    if opts.preload:
        print("Preload done for selected repo/arch.")
        sys.exit(0)

    print('Running build')
    cmd = [config['build-cmd'], '--root=' + build_root,
           '--rpmlist=' + rpmlist_filename,
           '--dist=' + bc_filename,
           '--arch=' + bi.buildarch]
    cmd += specialcmdopts + vm_options + buildargs
    cmd += [build_descr]

    cmd = su_wrapper(cmd)

    # change personality, if needed
    if hostarch != bi.buildarch and bi.buildarch in change_personality:
        cmd = [change_personality[bi.buildarch]] + cmd

    # record our settings for later builds
    if is_package_dir(os.curdir):
        core.store_write_last_buildroot(os.curdir, repo, arch, vm_type)

    try:
        rc = run_external(cmd[0], *cmd[1:])
        if rc:
            print()
            print('The buildroot was:', build_root)
            sys.exit(rc)
    except KeyboardInterrupt as i:
        print("keyboard interrupt, killing build ...")
        cmd.append('--kill')
        run_external(cmd[0], *cmd[1:])
        raise i

    pacdir = os.path.join(build_root, '.build.packages')
    if os.path.islink(pacdir):
        pacdir = os.readlink(pacdir)
        pacdir = os.path.join(build_root, pacdir)

    if os.path.exists(pacdir):
        (s_built, b_built) = get_built_files(pacdir, bi.buildtype)

        print()
        if s_built:
            print(decode_it(s_built))
        print()
        print(decode_it(b_built))

        if opts.keep_pkgs:
            for i in b_built.splitlines() + s_built.splitlines():
                shutil.copy2(i, os.path.join(opts.keep_pkgs, os.path.basename(decode_it(i))))

    if bi_file:
        bi_file.close()
    if bc_file:
        bc_file.close()
    rpmlist_file.close()

# vim: sw=4 et