Fix _config to correctly publish arm64 kiwi builder

Signed-off-by: Nicolas Belouin <nicolas.belouin@suse.com>

_config

@@ -60,6 +60,7 @@ BuildFlags: onlybuild:release-manifest-image
     BuildFlags: excludebuild:endpoint-copier-operator-image
     BuildFlags: excludebuild:ironic-image
     BuildFlags: excludebuild:ironic-ipa-downloader-image
+    BuildFlags: excludebuild:kiwi-builder-image
     BuildFlags: excludebuild:kubectl-image
     BuildFlags: excludebuild:kube-rbac-proxy-image
     BuildFlags: excludebuild:metallb-controller-image
@@ -149,6 +150,10 @@ BuildFlags: onlybuild:release-manifest-image
 %else
     %if "%{sub %{reverse %_project} 1 7}" != "%{reverse :ToTest}" && "%{sub %{reverse %_project} 1 9}" != "%{reverse :Snapshot}"
       BuildFlags: excludebuild:kiwi-builder-image
+    %else
+      %ifarch aarch64
+        BuildFlags: onlybuild:kiwi-builder-image
+      %endif
     %endif
 %endif
 

akri-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1-%RELEASE%
 annotations:

edge-image-builder-image/Dockerfile

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.0.1
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.0.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION
@@ -15,11 +15,11 @@ RUN zypper --non-interactive install --no-recommends edge-image-builder qemu-x86
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE edge-image-builder Container Image"
 LABEL org.opencontainers.image.description="edge-image-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="1.2.0"
+LABEL org.opencontainers.image.version="1.2.1"
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.2.0.1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.2.1-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

edge-image-builder-image/artifacts.yaml

@@ -5,7 +5,7 @@ metallb:
 endpoint-copier-operator:
   chart: endpoint-copier-operator
   repository: "%%CHART_REPO%%/%%CHART_PREFIX%%"
-  version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+  version: "%%CHART_MAJOR%%.0.1+up0.3.0"
 kubernetes:
   k3s:
     selinuxPackage: k3s-selinux-1.6-1.slemicro.noarch

edge-image-builder/_service

@@ -3,7 +3,7 @@
     <param name="url">https://github.com/suse-edge/edge-image-builder.git</param>
     <param name="scm">git</param>
     <param name="exclude">.git</param>
-    <param name="revision">v1.2.0</param>
+    <param name="revision">v1.2.1</param>
     <!-- Uncomment and set this For Pre-Release Version -->
     <!-- <param name="version">1.2.0~rc1</param> -->
     <!-- Uncomment and this for regular version -->

edge-image-builder/edge-image-builder.spec

@@ -17,7 +17,7 @@
 
 
 Name:           edge-image-builder
-Version:        1.2.0
+Version:        1.2.1
 Release:        0
 Summary:        Edge Image Builder
 License:        Apache-2.0

endpoint-copier-operator-chart/Chart.yaml

@@ -1,8 +1,8 @@
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0-%RELEASE%
 apiVersion: v2
-appVersion: v0.2.0
+appVersion: v0.3.0
 description: A Helm chart for Kubernetes
 name: endpoint-copier-operator
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+version: "%%CHART_MAJOR%%.0.1+up0.3.0"

endpoint-copier-operator-chart/templates/deployment.yaml

@@ -20,8 +20,23 @@ spec:
       labels:
         {{- include "endpoint-copier-operator.selectorLabels" . | nindent 8 }}
     spec:
+      {{- if .Values.priorityClassName }}
+      priorityClassName: {{ .Values.priorityClassName }}
+      {{- end }}
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
       containers:
       - command:
         - /manager

endpoint-copier-operator-chart/templates/rbac/role.yaml

@@ -7,9 +7,9 @@ metadata:
   name: {{ include "endpoint-copier-operator.fullname" . }}
 rules:
 - apiGroups:
-  - ""
+  - "discovery.k8s.io"
   resources:
-  - endpoints
+  - endpointslices
   verbs:
   - create
   - delete

endpoint-copier-operator-chart/values.yaml

@@ -8,7 +8,7 @@ image:
   repository: %%IMG_REPO%%/%%IMG_PREFIX%%endpoint-copier-operator
   pullPolicy: IfNotPresent
   # Overrides the image tag whose default is the chart appVersion.
-  tag: "0.2.0"
+  tag: "0.3.0"
 
 nameOverride: "endpoint-copier-operator"
 fullnameOverride: "endpoint-copier-operator"
@@ -29,6 +29,8 @@ podSecurityContext:
   seccompProfile:
     type: RuntimeDefault
 
+priorityClassName: "system-cluster-critical"
+
 securityContext:
   allowPrivilegeEscalation: false
   capabilities:
@@ -37,11 +39,11 @@ securityContext:
 
 resources:
   limits:
-    cpu: 500m
+    cpu: 100m
-    memory: 128Mi
-  requests:
-    cpu: 10m
     memory: 64Mi
+  requests:
+    cpu: 5m
+    memory: 32Mi
 
 autoscaling:
   enabled: false

endpoint-copier-operator/_service

@@ -2,7 +2,7 @@
  <service name="obs_scm">
     <param name="url">https://github.com/suse-edge/endpoint-copier-operator</param>
     <param name="scm">git</param>
-    <param name="revision">v0.2.0</param>
+    <param name="revision">v0.3.0</param>
     <param name="version">_auto_</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="changesgenerate">enable</param>

endpoint-copier-operator/endpoint-copier-operator.spec

@@ -17,14 +17,14 @@
 
 
 Name:           endpoint-copier-operator
-Version:        0.2.0
+Version:        0.3.0
-Release:        0.2.0
+Release:        0.3.0
 Summary:        Implements a Kubernetes API for copying endpoint resources
 License:        Apache-2.0
 URL:            https://github.com/suse-edge/endpoint-copier-operator
 Source:         endpoint-copier-operator-%{version}.tar
 Source1:        vendor.tar.gz
-BuildRequires:  golang(API) = 1.20
+BuildRequires:  golang(API) = 1.24
 ExcludeArch:    s390
 ExcludeArch:    %{ix86}
 

kubevirt-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2-%RELEASE%
 annotations:

rancher-turtles-airgap-resources-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.3_up0.20.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.4_up0.20.0
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.3_up0.20.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.4_up0.20.0-%RELEASE%
 apiVersion: v2
 appVersion: 0.20.0
 description: Rancher Turtles utility chart for airgap scenarios
@@ -7,4 +7,4 @@ home: https://github.com/rancher/turtles/
 icon: https://raw.githubusercontent.com/rancher/turtles/main/logos/capi.svg
 name: rancher-turtles-airgap-resources
 type: application
-version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+version: "%%CHART_MAJOR%%.0.4+up0.20.0"

rancher-turtles-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.3_up0.20.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.4_up0.20.0
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.3_up0.20.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.4_up0.20.0-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/display-name: Rancher Turtles - the Cluster API Extension
@@ -29,4 +29,4 @@ keywords:
 - provisioning
 name: rancher-turtles
 type: application
-version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+version: "%%CHART_MAJOR%%.0.4+up0.20.0"

release-manifest-image/release_manifest.yaml

@@ -138,7 +138,7 @@ spec:
         - prettyName: EndpointCopierOperator
           releaseName: endpoint-copier-operator
           chart: "%%CHART_REPO%%/%%CHART_PREFIX%%endpoint-copier-operator"
-          version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+          version: "%%CHART_MAJOR%%.0.1+up0.3.0"
         - prettyName: Elemental
           releaseName: elemental-operator
           chart: oci://registry.suse.com/rancher/elemental-operator-chart
@@ -175,4 +175,4 @@ spec:
         - prettyName: RancherTurtles
           releaseName: rancher-turtles
           chart: "%%CHART_REPO%%/%%CHART_PREFIX%%rancher-turtles"
-          version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+          version: "%%CHART_MAJOR%%.0.4+up0.20.0"

upgrade-controller-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.1_up0.1.1
-#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.1_up0.1.1-%RELEASE%
 apiVersion: v2
 appVersion: 0.1.1
 dependencies:
@@ -10,4 +10,4 @@ dependencies:
 description: A Helm chart for Upgrade Controller
 name: upgrade-controller
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.1.1"
+version: "%%CHART_MAJOR%%.0.1+up0.1.1"