Bump versions

Signed-off-by: Nicolas Belouin <nicolas.belouin@suse.com>

_config

@@ -60,6 +60,7 @@ BuildFlags: onlybuild:release-manifest-image
     BuildFlags: excludebuild:endpoint-copier-operator-image
     BuildFlags: excludebuild:ironic-image
     BuildFlags: excludebuild:ironic-ipa-downloader-image
+    BuildFlags: excludebuild:kiwi-builder-image
     BuildFlags: excludebuild:kubectl-image
     BuildFlags: excludebuild:kube-rbac-proxy-image
     BuildFlags: excludebuild:metallb-controller-image
@@ -149,6 +150,10 @@ BuildFlags: onlybuild:release-manifest-image
 %else
     %if "%{sub %{reverse %_project} 1 7}" != "%{reverse :ToTest}" && "%{sub %{reverse %_project} 1 9}" != "%{reverse :Snapshot}"
       BuildFlags: excludebuild:kiwi-builder-image
+    %else
+      %ifarch aarch64
+        BuildFlags: onlybuild:kiwi-builder-image
+      %endif
     %endif
 %endif
 

akri-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1
 #!BuildTag: %%CHART_PREFIX%%akri-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.1-%RELEASE%
 annotations:

edge-image-builder-image/Dockerfile

@@ -1,5 +1,5 @@
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.0.1
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1
-#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.0.1-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%edge-image-builder:1.2.1-%RELEASE%
 #!BuildVersion: 15.6
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-base:$SLE_VERSION
@@ -15,11 +15,11 @@ RUN zypper --non-interactive install --no-recommends edge-image-builder qemu-x86
 LABEL org.opencontainers.image.authors="SUSE LLC (https://www.suse.com/)"
 LABEL org.opencontainers.image.title="SLE edge-image-builder Container Image"
 LABEL org.opencontainers.image.description="edge-image-builder based on the SLE Base Container Image."
-LABEL org.opencontainers.image.version="1.2.0"
+LABEL org.opencontainers.image.version="1.2.1"
 LABEL org.opencontainers.image.url="https://www.suse.com/products/server/"
 LABEL org.opencontainers.image.created="%BUILDTIME%"
 LABEL org.opencontainers.image.vendor="SUSE LLC"
-LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.2.0.1-%RELEASE%"
+LABEL org.opensuse.reference="%%IMG_REPO%%/%%IMG_PREFIX%%edge-image-builder:1.2.1-%RELEASE%"
 LABEL org.openbuildservice.disturl="%DISTURL%"
 LABEL com.suse.supportlevel="%%SUPPORT_LEVEL%%"
 LABEL com.suse.eula="SUSE Combined EULA February 2024"

edge-image-builder-image/artifacts.yaml

@@ -5,7 +5,7 @@ metallb:
 endpoint-copier-operator:
   chart: endpoint-copier-operator
   repository: "%%CHART_REPO%%/%%CHART_PREFIX%%"
-  version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+  version: "%%CHART_MAJOR%%.0.1+up0.3.0"
 kubernetes:
   k3s:
     selinuxPackage: k3s-selinux-1.6-1.slemicro.noarch

edge-image-builder/_service

@@ -3,7 +3,7 @@
     <param name="url">https://github.com/suse-edge/edge-image-builder.git</param>
     <param name="scm">git</param>
     <param name="exclude">.git</param>
-    <param name="revision">v1.2.0</param>
+    <param name="revision">v1.2.1</param>
     <!-- Uncomment and set this For Pre-Release Version -->
     <!-- <param name="version">1.2.0~rc1</param> -->
     <!-- Uncomment and this for regular version -->

edge-image-builder/edge-image-builder.spec

@@ -17,7 +17,7 @@
 
 
 Name:           edge-image-builder
-Version:        1.2.0
+Version:        1.2.1
 Release:        0
 Summary:        Edge Image Builder
 License:        Apache-2.0

endpoint-copier-operator-chart/Chart.yaml

@@ -1,8 +1,8 @@
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0
-#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.0_up0.2.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%endpoint-copier-operator:%%CHART_MAJOR%%.0.1_up0.3.0-%RELEASE%
 apiVersion: v2
-appVersion: v0.2.0
+appVersion: v0.3.0
 description: A Helm chart for Kubernetes
 name: endpoint-copier-operator
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+version: "%%CHART_MAJOR%%.0.1+up0.3.0"

endpoint-copier-operator-chart/templates/deployment.yaml

@@ -20,8 +20,23 @@ spec:
       labels:
         {{- include "endpoint-copier-operator.selectorLabels" . | nindent 8 }}
     spec:
+      {{- if .Values.priorityClassName }}
+      priorityClassName: {{ .Values.priorityClassName }}
+      {{- end }}
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
       containers:
       - command:
         - /manager

endpoint-copier-operator-chart/templates/rbac/role.yaml

@@ -7,9 +7,9 @@ metadata:
   name: {{ include "endpoint-copier-operator.fullname" . }}
 rules:
 - apiGroups:
-  - ""
+  - "discovery.k8s.io"
   resources:
-  - endpoints
+  - endpointslices
   verbs:
   - create
   - delete

endpoint-copier-operator-chart/values.yaml

@@ -8,7 +8,7 @@ image:
   repository: %%IMG_REPO%%/%%IMG_PREFIX%%endpoint-copier-operator
   pullPolicy: IfNotPresent
   # Overrides the image tag whose default is the chart appVersion.
-  tag: "0.2.0"
+  tag: "0.3.0"
 
 nameOverride: "endpoint-copier-operator"
 fullnameOverride: "endpoint-copier-operator"
@@ -29,6 +29,8 @@ podSecurityContext:
   seccompProfile:
     type: RuntimeDefault
 
+priorityClassName: "system-cluster-critical"
+
 securityContext:
   allowPrivilegeEscalation: false
   capabilities:
@@ -37,11 +39,11 @@ securityContext:
 
 resources:
   limits:
-    cpu: 500m
+    cpu: 100m
-    memory: 128Mi
-  requests:
-    cpu: 10m
     memory: 64Mi
+  requests:
+    cpu: 5m
+    memory: 32Mi
 
 autoscaling:
   enabled: false

endpoint-copier-operator/_service

@@ -2,7 +2,7 @@
  <service name="obs_scm">
     <param name="url">https://github.com/suse-edge/endpoint-copier-operator</param>
     <param name="scm">git</param>
-    <param name="revision">v0.2.0</param>
+    <param name="revision">v0.3.0</param>
     <param name="version">_auto_</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="changesgenerate">enable</param>

endpoint-copier-operator/endpoint-copier-operator.spec

@@ -17,14 +17,14 @@
 
 
 Name:           endpoint-copier-operator
-Version:        0.2.0
+Version:        0.3.0
-Release:        0.2.0
+Release:        0.3.0
 Summary:        Implements a Kubernetes API for copying endpoint resources
 License:        Apache-2.0
 URL:            https://github.com/suse-edge/endpoint-copier-operator
 Source:         endpoint-copier-operator-%{version}.tar
 Source1:        vendor.tar.gz
-BuildRequires:  golang(API) = 1.20
+BuildRequires:  golang(API) = 1.24
 ExcludeArch:    s390
 ExcludeArch:    %{ix86}
 

ironic-image/Dockerfile

@@ -20,11 +20,11 @@ RUN sed -i -e 's%^# rpm.install.excludedocs = no.*%rpm.install.excludedocs = yes
 
 #!ArchExclusiveLine: x86_64
 RUN if [ "$(uname -m)" = "x86_64" ];then \
-      zypper --installroot /installroot --non-interactive install --no-recommends syslinux python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi inotify-tools ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
+      zypper --installroot /installroot --non-interactive install --no-recommends syslinux python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python311-pyinotify python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
     fi
 #!ArchExclusiveLine: aarch64
 RUN if [ "$(uname -m)" = "aarch64" ];then \
-      zypper --installroot /installroot --non-interactive install --no-recommends python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi inotify-tools ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
+      zypper --installroot /installroot --non-interactive install --no-recommends python311-devel python311 python311-pip python-dracclient python311-sushy-oem-idrac python311-proliantutils python311-sushy python311-pyinotify python3-ironicclient git curl sles-release tar gzip vim gawk dnsmasq dosfstools apache2 apache2-mod_wsgi ipcalc ipmitool iproute2 procps qemu-tools sqlite3 util-linux xorriso tftp ipxe-bootimgs python311-sushy-tools crudini openstack-ironic openstack-ironic-inspector-api; \
     fi
     
 # DATABASE
@@ -32,7 +32,9 @@ RUN mkdir -p /installroot/var/lib/ironic && \
   /installroot/usr/bin/sqlite3 /installroot/var/lib/ironic/ironic.sqlite "pragma journal_mode=wal" && \
   zypper --installroot /installroot --non-interactive remove sqlite3
 
+# build actual image
 FROM micro AS final
+
 MAINTAINER SUSE LLC (https://www.suse.com/)
 # Define labels according to https://en.opensuse.org/Building_derived_containers
 LABEL org.opencontainers.image.title="SLE Openstack Ironic Container Image"
@@ -62,14 +64,15 @@ RUN echo 'alias mkisofs="xorriso -as mkisofs"' >> ~/.bashrc
 COPY mkisofs_wrapper /usr/bin/mkisofs
 RUN set -euo pipefail; chmod +x /usr/bin/mkisofs
 
-COPY auth-common.sh configure-ironic.sh ironic-common.sh rundnsmasq runhttpd runironic runlogwatch.sh tls-common.sh configure-nonroot.sh ironic-probe.j2 /bin/
-RUN set -euo pipefail; chmod +x /bin/auth-common.sh; chmod +x /bin/configure-ironic.sh; chmod +x /bin/ironic-common.sh; chmod +x /bin/rundnsmasq; chmod +x /bin/runhttpd; chmod +x /bin/runironic; chmod +x /bin/runlogwatch.sh; chmod +x /bin/tls-common.sh; chmod +x /bin/configure-nonroot.sh;
 RUN mkdir -p /tftpboot
 RUN mkdir -p $GRUB_DIR
 
-# No need to support the Legacy BIOS boot
+COPY scripts/ /bin/
-#RUN cp /usr/share/syslinux/pxelinux.0 /tftpboot
+COPY configure-nonroot.sh /bin/
-#RUN cp /usr/share/syslinux/chain.c32 /tftpboot/
+RUN set -euo pipefail; chmod +x /bin/configure-ironic.sh /bin/rundnsmasq /bin/runhttpd /bin/runironic /bin/runlogwatch.sh /bin/configure-nonroot.sh
+
+COPY ironic-config/inspector.ipxe.j2 ironic-config/httpd-ironic-api.conf.j2 \
+     ironic-config/ipxe_config.template /tmp/
 
 # IRONIC #
 RUN cp /usr/share/ipxe/undionly.kpxe /tftpboot/undionly.kpxe
@@ -77,31 +80,29 @@ RUN cp /usr/share/ipxe/undionly.kpxe /tftpboot/undionly.kpxe
 RUN if [ "$(uname -m)" = "x86_64" ];then \
       cp /usr/share/ipxe/ipxe-x86_64.efi /tftpboot/ipxe.efi ;\
     fi
-#!ArchExclusiveLine: x86_64
+#!ArchExclusiveLine: aarch64 
 RUN if [ "$(uname -m)" = "aarch64" ]; then\ 
-     cp /usr/share/ipxe/snp-arm64.efi /tftpboot/ipxe.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp-arm64.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp.efi ;\
+      cp /usr/share/ipxe/snp-arm64.efi /tftpboot/ipxe.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp-arm64.efi; cp /usr/share/ipxe/snp-arm64.efi /tftpboot/snp.efi ;\
     fi
     
 COPY --from=base /tmp/esp-x86_64.img /tmp/uefi_esp-x86_64.img
 COPY --from=base /tmp/esp-aarch64.img /tmp/uefi_esp-arm64.img
 
-COPY ironic.conf.j2 /etc/ironic/
+COPY ironic-config/ironic.conf.j2 /etc/ironic/
-COPY inspector.ipxe.j2 httpd-ironic-api.conf.j2 ipxe_config.template /tmp/
+COPY ironic-config/network-data-schema-empty.json /etc/ironic/
-COPY network-data-schema-empty.json /etc/ironic/
 
 # DNSMASQ
-COPY dnsmasq.conf.j2 /etc/
+COPY ironic-config/dnsmasq.conf.j2 /etc/
-
-# Custom httpd config, removes all but the bare minimum needed modules
-COPY httpd.conf.j2 /etc/httpd/conf/
-COPY httpd-modules.conf /etc/httpd/conf.modules.d/
-COPY apache2-vmedia.conf.j2 /etc/httpd-vmedia.conf.j2
-COPY apache2-ipxe.conf.j2 /etc/httpd-ipxe.conf.j2
 
 # Workaround
 # Removing the 010-ironic.conf file that comes with the package 
 RUN rm /etc/ironic/ironic.conf.d/010-ironic.conf
 
+# Custom httpd config, removes all but the bare minimum needed modules
+COPY ironic-config/httpd.conf.j2 /etc/httpd/conf/
+COPY ironic-config/httpd-modules.conf /etc/httpd/conf.modules.d/
+COPY ironic-config/apache2-vmedia.conf.j2 /etc/httpd-vmedia.conf.j2
+COPY ironic-config/apache2-ipxe.conf.j2 /etc/httpd-ipxe.conf.j2
+
 # configure non-root user and set relevant permissions
-RUN configure-nonroot.sh && \
+RUN configure-nonroot.sh && rm -f /bin/configure-nonroot.sh
-  rm -f /bin/configure-nonroot.sh

ironic-image/inspector-apache.conf.j2

@@ -1,57 +0,0 @@
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
-
-
-{% if env.LISTEN_ALL_INTERFACES | lower == "true" %}
-Listen {{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
- <VirtualHost *:{{ env.IRONIC_INSPECTOR_LISTEN_PORT }}>
-{% else %}
-Listen {{ env.IRONIC_URL_HOST }}:{{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
- <VirtualHost {{ env.IRONIC_URL_HOST }}:{{ env.IRONIC_INSPECTOR_LISTEN_PORT }}>
-{% endif %}
-    {% if env.IRONIC_INSPECTOR_PRIVATE_PORT == "unix" %}
-    ProxyPass "/"  "unix:/shared/inspector.sock|http://127.0.0.1/"
-    ProxyPassReverse "/"  "unix:/shared/inspector.sock|http://127.0.0.1/"
-    {% else %}
-    ProxyPass "/"  "http://127.0.0.1:{{ env.IRONIC_INSPECTOR_PRIVATE_PORT }}/"
-    ProxyPassReverse "/"  "http://127.0.0.1:{{ env.IRONIC_INSPECTOR_PRIVATE_PORT }}/"
-    {% endif %}
-
-    SetEnv APACHE_RUN_USER ironic-suse
-    SetEnv APACHE_RUN_GROUP ironic-suse
-
-    ErrorLog /dev/stdout
-    LogLevel debug
-    CustomLog /dev/stdout combined
-
-    SSLEngine On
-    SSLProtocol {{ env.IRONIC_SSL_PROTOCOL }}
-    SSLCertificateFile {{ env.IRONIC_INSPECTOR_CERT_FILE }} 
-    SSLCertificateKeyFile {{ env.IRONIC_INSPECTOR_KEY_FILE }}
-
-    {% if "INSPECTOR_HTPASSWD" in env and env.INSPECTOR_HTPASSWD | length %}
-    <Location / >
-        AuthType Basic
-        AuthName "Restricted area"
-        AuthUserFile "/etc/ironic-inspector/htpasswd"
-        Require valid-user
-    </Location>
-
-    <Location ~ "^/(v1/?)?$" >
-        Require all granted
-    </Location>
-
-    <Location /v1/continue >
-        Require all granted
-    </Location>
-    {% endif %}
-</VirtualHost>

ironic-image/ironic-config/ironic.conf.j2

@@ -187,11 +187,6 @@ insecure = {{ env.IRONIC_INSECURE }}
 [nova]
 send_power_notifications = false
 
-[oslo_messaging_notifications]
-driver = prometheus_exporter
-location = /shared/ironic_prometheus_exporter
-transport_url = fake://
-
 [pxe]
 # NOTE(dtantsur): keep this value at least 3x lower than
 # [conductor]deploy_callback_timeout so that at least some retries happen.

ironic-image/ironic-inspector.conf.j2

@@ -1,68 +0,0 @@
-[DEFAULT]
-auth_strategy = noauth
-debug = true
-transport_url = fake://
-use_stderr = true
-{% if env.INSPECTOR_REVERSE_PROXY_SETUP == "true" %}
-{% if env.IRONIC_INSPECTOR_PRIVATE_PORT == "unix" %}
-listen_unix_socket = /shared/inspector.sock
-# NOTE(dtantsur): this is not ideal, but since the socket is accessed from
-# another container, we need to make it world-writeable.
-listen_unix_socket_mode = 0666
-{% else %}
-listen_port = {{ env.IRONIC_INSPECTOR_PRIVATE_PORT }}
-listen_address = 127.0.0.1
-{% endif %}
-{% elif env.LISTEN_ALL_INTERFACES | lower == "true" %}
-listen_port = {{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
-listen_address = ::
-{% else %}
-listen_port = {{ env.IRONIC_INSPECTOR_LISTEN_PORT }}
-listen_address = {{ env.IRONIC_IP }}
-{% endif %}
-host = {{ env.IRONIC_IP }}
-{% if env.IRONIC_INSPECTOR_TLS_SETUP == "true" and env.INSPECTOR_REVERSE_PROXY_SETUP == "false" %}
-use_ssl = true
-{% endif %}
-
-[database]
-connection = sqlite:////var/lib/ironic-inspector/ironic-inspector.db
-
-{% if env.IRONIC_INSPECTOR_ENABLE_DISCOVERY == "true" %}
-[discovery]
-enroll_node_driver = ipmi
-{% endif %}
-
-[ironic]
-auth_type = none
-endpoint_override = {{ env.IRONIC_BASE_URL }}
-{% if env.IRONIC_TLS_SETUP == "true" %}
-cafile = {{ env.IRONIC_CACERT_FILE }}
-insecure = {{ env.IRONIC_INSECURE }}
-{% endif %}
-
-[processing]
-add_ports = all
-always_store_ramdisk_logs = true
-keep_ports = present
-{% if env.IRONIC_INSPECTOR_ENABLE_DISCOVERY == "true" %}
-node_not_found_hook = enroll
-{% endif %}
-permit_active_introspection = true
-power_off = false
-processing_hooks = $default_processing_hooks,lldp_basic
-ramdisk_logs_dir = /shared/log/ironic-inspector/ramdisk
-store_data = database
-
-[pxe_filter]
-driver = noop
-
-[service_catalog]
-auth_type = none
-endpoint_override = {{ env.IRONIC_INSPECTOR_BASE_URL }}
-
-{% if env.IRONIC_INSPECTOR_TLS_SETUP == "true" and env.INSPECTOR_REVERSE_PROXY_SETUP == "false" %}
-[ssl]
-cert_file = {{ env.IRONIC_INSPECTOR_CERT_FILE }}
-key_file = {{ env.IRONIC_INSPECTOR_KEY_FILE }}
-{% endif %}

ironic-image/runironic-api

@@ -1,13 +0,0 @@
-#!/usr/bin/bash
-
-export IRONIC_DEPLOYMENT="API"
-
-# shellcheck disable=SC1091
-. /bin/configure-ironic.sh
-
-export IRONIC_REVERSE_PROXY_SETUP=false
-
-python3 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' < /tmp/httpd-ironic-api.conf.j2 > /etc/httpd/conf.d/ironic.conf
-
-# shellcheck disable=SC1091
-. /bin/runhttpd

ironic-image/runironic-conductor

@@ -1,20 +0,0 @@
-#!/usr/bin/bash
-
-export IRONIC_DEPLOYMENT="Conductor"
-
-# shellcheck disable=SC1091
-. /bin/configure-ironic.sh
-
-# Ramdisk logs
-mkdir -p /shared/log/ironic/deploy
-
-run_ironic_dbsync
-
-if [[ "$IRONIC_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
-    # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_CERT_FILE}" | while read -r file event; do
-        kill $(pgrep ironic)
-    done &
-fi
-
-exec /usr/bin/ironic-conductor

ironic-image/runironic-exporter

@@ -1,12 +0,0 @@
-#!/usr/bin/bash
-
-# shellcheck disable=SC1091
-. /bin/configure-ironic.sh
-
-FLASK_RUN_HOST=${FLASK_RUN_HOST:-0.0.0.0}
-FLASK_RUN_PORT=${FLASK_RUN_PORT:-9608}
-
-export IRONIC_CONFIG="/etc/ironic/ironic.conf"
-
-exec gunicorn -b "${FLASK_RUN_HOST}:${FLASK_RUN_PORT}" -w 4 \
-    ironic_prometheus_exporter.app.wsgi:application

ironic-image/runironic-inspector

@@ -1,62 +0,0 @@
-#!/usr/bin/bash
-
-set -euxo pipefail
-
-CONFIG=/etc/ironic-inspector/ironic-inspector.conf
-
-export IRONIC_INSPECTOR_ENABLE_DISCOVERY=${IRONIC_INSPECTOR_ENABLE_DISCOVERY:-false}
-export INSPECTOR_REVERSE_PROXY_SETUP=${INSPECTOR_REVERSE_PROXY_SETUP:-false}
-
-# shellcheck disable=SC1091
-. /bin/tls-common.sh
-# shellcheck disable=SC1091
-. /bin/ironic-common.sh
-# shellcheck disable=SC1091
-. /bin/auth-common.sh
-
-if [[ "$USE_IRONIC_INSPECTOR" == "false" ]]; then
-    echo "FATAL: ironic-inspector is disabled via USE_IRONIC_INSPECTOR"
-    exit 1
-fi
-
-wait_for_interface_or_ip
-
-IRONIC_INSPECTOR_PORT=${IRONIC_INSPECTOR_ACCESS_PORT}
-if [[ "$IRONIC_INSPECTOR_TLS_SETUP" == "true" ]]; then
-    if [[ "${INSPECTOR_REVERSE_PROXY_SETUP}" == "true" ]] && [[ "${IRONIC_INSPECTOR_PRIVATE_PORT}" != "unix" ]]; then
-        IRONIC_INSPECTOR_PORT=$IRONIC_INSPECTOR_PRIVATE_PORT
-    fi
-else
-    export INSPECTOR_REVERSE_PROXY_SETUP="false" # If TLS is not used, we have no reason to use the reverse proxy
-fi
-
-export IRONIC_INSPECTOR_BASE_URL="${IRONIC_INSPECTOR_SCHEME}://${IRONIC_URL_HOST}:${IRONIC_INSPECTOR_PORT}"
-export IRONIC_BASE_URL="${IRONIC_SCHEME}://${IRONIC_URL_HOST}:${IRONIC_ACCESS_PORT}"
-
-build_j2_config()
-{
-    local CONFIG_FILE="$1"
-    python3 -c 'import os; import sys; import jinja2; sys.stdout.write(jinja2.Template(sys.stdin.read()).render(env=os.environ))' < "$CONFIG_FILE.j2"
-}
-
-# Merge with the original configuration file from the package.
-build_j2_config "$CONFIG" | crudini --merge "$CONFIG"
-
-configure_inspector_auth
-
-configure_client_basic_auth ironic "${CONFIG}"
-
-ironic-inspector-dbsync --config-file "${CONFIG}" upgrade
-
-if [[ "$INSPECTOR_REVERSE_PROXY_SETUP" == "false" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
-    # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_INSPECTOR_CERT_FILE}" | while read -r file event; do
-        kill $(pgrep ironic)
-    done &
-fi
-
-# Make sure ironic traffic bypasses any proxies
-export NO_PROXY="${NO_PROXY:-},$IRONIC_IP"
-
-# shellcheck disable=SC2086
-exec /usr/bin/ironic-inspector

ironic-image/scripts/configure-ironic.sh

@@ -84,7 +84,6 @@ echo 'Options set from Environment variables'
 env | grep "^OS_" || true
 
 mkdir -p /shared/html
-mkdir -p /shared/ironic_prometheus_exporter
 
 configure_json_rpc_auth
 

ironic-image/scripts/runhttpd

@@ -72,7 +72,7 @@ fi
 # Set up inotify to kill the container (restart) whenever cert files for ironic api change
 if [[ "$IRONIC_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
     # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_CERT_FILE}" | while read -r file event; do
+    python3.11 -m pyinotify --raw-format -e IN_DELETE_SELF -v "${IRONIC_CERT_FILE}" | while read -r file event; do
         kill -WINCH $(pgrep httpd)
     done &
 fi
@@ -80,7 +80,7 @@ fi
 # Set up inotify to kill the container (restart) whenever cert of httpd for /shared/html/<redifsh;ilo> path change
 if [[ "$IRONIC_VMEDIA_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
     # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_VMEDIA_CERT_FILE}" | while read -r file event; do
+    python3.11 -m pyinotify --raw-format -e IN_DELETE_SELF -v "${IRONIC_VMEDIA_CERT_FILE}" | while read -r file event; do
         kill -WINCH $(pgrep httpd)
     done &
 fi

ironic-image/scripts/runironic

@@ -13,7 +13,7 @@ run_ironic_dbsync
 
 if [[ "$IRONIC_TLS_SETUP" == "true" ]] && [[ "${RESTART_CONTAINER_CERTIFICATE_UPDATED}" == "true" ]]; then
     # shellcheck disable=SC2034
-    inotifywait -m -e delete_self "${IRONIC_CERT_FILE}" | while read -r file event; do
+    python3.11 -m pyinotify --raw-format -e IN_DELETE_SELF -v "${IRONIC_CERT_FILE}" | while read -r file event; do
         kill $(pgrep ironic)
     done &
 fi

ironic-image/scripts/runlogwatch.sh

@@ -11,7 +11,7 @@ while [ ! -d "${LOG_DIR}" ]; do
   sleep 5
 done
 
-inotifywait -m "${LOG_DIR}" -e close_write |
+python3.11 -m pyinotify --raw-format -e IN_CLOSE_WRITE -v "${LOG_DIR}" |
     while read -r path _action file; do
         echo "************ Contents of ${path}/${file} ramdisk log file bundle **************"
         tar -xOzvvf "${path}/${file}" | sed -e "s/^/${file}: /"

ironic-ipa-downloader-image/Dockerfile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.7
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.8
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.7-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader:3.0.8-%RELEASE%
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
@@ -33,8 +33,6 @@ LABEL com.suse.release-stage="released"
 
 COPY --from=base /installroot /
 RUN cp /getopt /usr/bin/
-RUN cp /srv/tftpboot/openstack-ironic-image/initrd*.zst /tmp
-RUN cp /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel /tmp
 RUN sha256sum /srv/tftpboot/openstack-ironic-image/initrd*.zst /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel > /tmp/images.sha256
 # configure non-root user
 COPY configure-nonroot.sh /bin/

ironic-ipa-downloader-image/Dockerfile.aarch64

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.7
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.8
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.7-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-aarch64:3.0.8-%RELEASE%
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
@@ -33,8 +33,6 @@ LABEL com.suse.release-stage="released"
 
 COPY --from=base /installroot /
 RUN cp /getopt /usr/bin/
-RUN cp /srv/tftpboot/openstack-ironic-image/initrd*.zst /tmp
-RUN cp /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel /tmp
 RUN sha256sum /srv/tftpboot/openstack-ironic-image/initrd*.zst /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel > /tmp/images.sha256
 # configure non-root user
 COPY configure-nonroot.sh /bin/

ironic-ipa-downloader-image/Dockerfile.x86_64

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.7
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.8
-#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.7-%RELEASE%
+#!BuildTag: %%IMG_PREFIX%%ironic-ipa-downloader-x86_64:3.0.8-%RELEASE%
 ARG SLE_VERSION
 FROM registry.suse.com/bci/bci-micro:$SLE_VERSION AS micro
 
@@ -33,8 +33,6 @@ LABEL com.suse.release-stage="released"
 
 COPY --from=base /installroot /
 RUN cp /getopt /usr/bin/
-RUN cp /srv/tftpboot/openstack-ironic-image/initrd*.zst /tmp
-RUN cp /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel /tmp
 RUN sha256sum /srv/tftpboot/openstack-ironic-image/initrd*.zst /srv/tftpboot/openstack-ironic-image/openstack-ironic-image*.kernel > /tmp/images.sha256
 # configure non-root user
 COPY configure-nonroot.sh /bin/

ironic-ipa-downloader-image/get-resource.sh

@@ -6,6 +6,8 @@ export http_proxy=${http_proxy:-$HTTP_PROXY}
 export https_proxy=${https_proxy:-$HTTPS_PROXY}
 export no_proxy=${no_proxy:-$NO_PROXY}
 
+IMAGES_BASE_PATH="/srv/tftpboot/openstack-ironic-image"
+
 if [ -d "/tmp/ironic-certificates" ]; then
   sha256sum /tmp/ironic-certificates/* > /tmp/certificates.sha256
   if cmp "/shared/certificates.sha256" "/tmp/certificates.sha256"; then
@@ -27,13 +29,13 @@ if [ -z "${IPA_BASEURI}" ]; then
   # SLES BASED IPA - ironic-ipa-ramdisk-x86_64 and ironic-ipa-ramdisk-aarch64 packages
   mkdir -p /shared/html/images
   if [ -f /tmp/initrd-x86_64.zst ]; then
-    cp /tmp/initrd-x86_64.zst /shared/html/images/ironic-python-agent-x86_64.initramfs
+    cp ${IMAGES_BASE_PATH}/initrd-x86_64.zst /shared/html/images/ironic-python-agent-x86_64.initramfs
-    cp /tmp/openstack-ironic-image.x86_64*.kernel /shared/html/images/ironic-python-agent-x86_64.kernel
+    cp ${IMAGES_BASE_PATH}/openstack-ironic-image.x86_64*.kernel /shared/html/images/ironic-python-agent-x86_64.kernel
   fi
   # Use arm64 as destination for iPXE compatibility
   if [ -f /tmp/initrd-aarch64.zst ]; then
-    cp /tmp/initrd-aarch64.zst /shared/html/images/ironic-python-agent-arm64.initramfs
+    cp ${IMAGES_BASE_PATH}/initrd-aarch64.zst /shared/html/images/ironic-python-agent-arm64.initramfs
-    cp /tmp/openstack-ironic-image.aarch64*.kernel /shared/html/images/ironic-python-agent-arm64.kernel
+    cp ${IMAGES_BASE_PATH}/openstack-ironic-image.aarch64*.kernel /shared/html/images/ironic-python-agent-arm64.kernel
   fi
 
   cp /tmp/images.sha256 /shared/images.sha256

kubevirt-dashboard-extension-chart/Chart.yaml

@@ -1,4 +1,3 @@
-#!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2
 #!BuildTag: %%CHART_PREFIX%%kubevirt-dashboard-extension:%%CHART_MAJOR%%.0.2_up1.3.2-%RELEASE%
 annotations:

metal3-chart/Chart.yaml

@@ -1,7 +1,7 @@
-#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.7_up0.11.5
+#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.8_up0.11.6
-#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.7_up0.11.5-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%metal3:%%CHART_MAJOR%%.0.8_up0.11.6-%RELEASE%
 apiVersion: v2
-appVersion: 0.11.5
+appVersion: 0.11.6
 dependencies:
 - alias: metal3-baremetal-operator
   name: baremetal-operator
@@ -15,7 +15,7 @@ dependencies:
   condition: global.enable_mariadb
   name: mariadb
   repository: file://./charts/mariadb
-  version: 0.5.4
+  version: 0.6.0
 - alias: metal3-media
   condition: global.enable_metal3_media_server
   name: media
@@ -25,4 +25,4 @@ description: A Helm chart that installs all of the dependencies needed for Metal
 icon: https://github.com/cncf/artwork/raw/master/projects/metal3/icon/color/metal3-icon-color.svg
 name: metal3
 type: application
-version: "%%CHART_MAJOR%%.0.7+up0.11.5"
+version: "%%CHART_MAJOR%%.0.8+up0.11.6"

metal3-chart/charts/ironic/values.yaml

@@ -60,7 +60,7 @@ images:
   ironicIPADownloader:
     repository: registry.opensuse.org/isv/suse/edge/metal3/containers/images/ironic-ipa-downloader
     pullPolicy: IfNotPresent
-    tag: 3.0.7
+    tag: 3.0.8
 
 nameOverride: ""
 fullnameOverride: ""

metal3-chart/charts/mariadb/Chart.yaml

@@ -1,6 +1,6 @@
 apiVersion: v2
-appVersion: 10.6.7
+appVersion: "10.11"
 description: A Helm chart for MariaDB, used by Metal3
 name: mariadb
 type: application
-version: 0.5.4
+version: 0.6.0

metal3-chart/charts/mariadb/templates/configmap-mariadb.yaml

@@ -0,0 +1,13 @@
+apiVersion: v1
+kind: ConfigMap 
+metadata:
+  name: mariadb-config
+  labels:
+    {{- include "mariadb.labels" . | nindent 4 }}
+data:
+  ironic.conf: |
+    [mariadb]
+    max_connections 64
+    max_heap_table_size 1M
+    innodb_buffer_pool_size 5M
+    innodb_log_buffer_size 512K

metal3-chart/charts/mariadb/templates/configmap.yaml

@@ -5,4 +5,7 @@ metadata:
   labels:
     {{- include "mariadb.labels" . | nindent 4 }}
 data:
-  RESTART_CONTAINER_CERTIFICATE_UPDATED: "false"
+  MARIADB_USER: ironic
+  MARIADB_RANDOM_ROOT_PASSWORD: "yes"
+  MARIADB_DATABASE: ironic
+  MARIADB_AUTO_UPGRADE: "yes"

metal3-chart/charts/mariadb/templates/deployment.yaml

@@ -25,23 +25,50 @@ spec:
       serviceAccountName: {{ include "mariadb.serviceAccountName" . }}
       securityContext:
         {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      initContainers:
+      # This would run during entrypoint if run as root
+      - name: set-volume-owners
+        image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
+        imagePullPolicy: {{ .Values.image.pullPolicy }}
+        securityContext:
+            runAsUser: 0
+            allowPrivilegeEscalation: true
+            capabilities:
+              drop:
+              - ALL
+              add:
+              - CHOWN
+              - FOWNER
+              - DAC_OVERRIDE
+            seccompProfile:
+              type: RuntimeDefault
+        volumeMounts:
+          - name: mariadb-conf
+            mountPath: /etc/mysql/conf.d
+          - name: mariadb-run
+            mountPath: /run/mysql
+          {{- $volmounts }}
+        command: ['bash', '-c', 'source /usr/local/bin/docker-entrypoint.sh && docker_create_db_directories']
+        env:
+          - name: DATADIR
+            value: /var/lib/mysql
+          - name: SOCKET
+            value: /run/mysql/mysql.sock
       containers:
       - name: mariadb
         image: "{{ .Values.image.repository }}:{{ .Values.image.tag }}"
         imagePullPolicy: {{ .Values.image.pullPolicy }}
         securityContext:
           {{- toYaml .Values.securityContext | nindent 12 }}
+        envFrom:
+          - configMapRef:
+              name: mariadb-cm
         env:
           - name: MARIADB_PASSWORD
             valueFrom:
               secretKeyRef:
                 key: password
                 name: ironic-mariadb
-          - name: RESTART_CONTAINER_CERTIFICATE_UPDATED
-            valueFrom:
-              configMapKeyRef:
-                name: mariadb-cm
-                key: RESTART_CONTAINER_CERTIFICATE_UPDATED
         lifecycle:
           preStop:
             exec:
@@ -52,9 +79,9 @@ spec:
         livenessProbe:
           exec:
             command:
-              - sh
+              - healthcheck.sh
-              - -c
+              - --connect
-              - mysqladmin status -uironic -p$(printenv MARIADB_PASSWORD)
+              - --innodb_initialized
           failureThreshold: 10
           initialDelaySeconds: 30
           periodSeconds: 30
@@ -67,19 +94,29 @@ spec:
         readinessProbe:
           exec:
             command:
-              - sh
+              - healthcheck.sh
-              - -c
+              - --connect
-              - mysqladmin status -uironic -p$(printenv MARIADB_PASSWORD)
+              - --innodb_initialized
           failureThreshold: 10
           initialDelaySeconds: 30
           periodSeconds: 30
           successThreshold: 1
           timeoutSeconds: 10
         volumeMounts:
+            - name: mariadb-conf
+              mountPath: /etc/mysql/conf.d
+            - name: mariadb-run
+              mountPath: /run/mysql
             {{- $volmounts }}
       {{- with .Values.global.nodeSelector }}
       nodeSelector:
         {{- toYaml . | nindent 8 }}
       {{- end }}
       volumes:
+        - name: mariadb-conf
+          configMap:
+            name: mariadb-config
+        - name: mariadb-run
+          emptyDir:
+            sizeLimit: 20Mi
         {{- $volumes }}

metal3-chart/charts/mariadb/values.yaml

@@ -12,9 +12,9 @@ service:
     targetPort: 3306
 
 image:
-  repository: registry.opensuse.org/isv/suse/edge/metal3/containers/images/suse/mariadb
+  repository: registry.suse.com/suse/mariadb
   pullPolicy: IfNotPresent
-  tag: 10.6.15.1
+  tag: 10.11
 
 nameOverride: ""
 fullnameOverride: ""
@@ -31,8 +31,8 @@ serviceAccount:
 podAnnotations: {}
 
 podSecurityContext:
-  runAsUser: 10060
+  runAsUser: 60
-  fsGroup: 10060
+  fsGroup: 60
 
 securityContext:
   allowPrivilegeEscalation: false
@@ -60,6 +60,7 @@ persistence:
 volumeMounts:
   - name: mariadb-data-volume
     mountPath: /var/lib/mysql
+    subPath: data
 
 volumes:
   - name: mariadb-data-volume

metal3-chart/values.yaml

@@ -115,8 +115,8 @@ metal3-mariadb:
   persistence:
     storageClass: ""
   image:
-    repository: "registry.suse.com/edge/mariadb"
+    repository: "registry.suse.com/suse/mariadb"
-    tag: "10.6.15.1"
+    tag: "10.11"
 
 #
 # Baremetal Operator

rancher-turtles-airgap-resources-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.3_up0.20.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.4_up0.20.0
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.3_up0.20.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles-airgap-resources:%%CHART_MAJOR%%.0.4_up0.20.0-%RELEASE%
 apiVersion: v2
 appVersion: 0.20.0
 description: Rancher Turtles utility chart for airgap scenarios
@@ -7,4 +7,4 @@ home: https://github.com/rancher/turtles/
 icon: https://raw.githubusercontent.com/rancher/turtles/main/logos/capi.svg
 name: rancher-turtles-airgap-resources
 type: application
-version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+version: "%%CHART_MAJOR%%.0.4+up0.20.0"

rancher-turtles-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.3_up0.20.0
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.4_up0.20.0
-#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.3_up0.20.0-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%rancher-turtles:%%CHART_MAJOR%%.0.4_up0.20.0-%RELEASE%
 annotations:
   catalog.cattle.io/certified: rancher
   catalog.cattle.io/display-name: Rancher Turtles - the Cluster API Extension
@@ -29,4 +29,4 @@ keywords:
 - provisioning
 name: rancher-turtles
 type: application
-version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+version: "%%CHART_MAJOR%%.0.4+up0.20.0"

release-manifest-image/release_manifest.yaml

@@ -138,7 +138,7 @@ spec:
         - prettyName: EndpointCopierOperator
           releaseName: endpoint-copier-operator
           chart: "%%CHART_REPO%%/%%CHART_PREFIX%%endpoint-copier-operator"
-          version: "%%CHART_MAJOR%%.0.0+up0.2.1"
+          version: "%%CHART_MAJOR%%.0.1+up0.3.0"
         - prettyName: Elemental
           releaseName: elemental-operator
           chart: oci://registry.suse.com/rancher/elemental-operator-chart
@@ -171,8 +171,8 @@ spec:
         - prettyName: Metal3
           releaseName: metal3
           chart: "%%CHART_REPO%%/%%CHART_PREFIX%%metal3"
-          version: "%%CHART_MAJOR%%.0.7+up0.11.5"
+          version: "%%CHART_MAJOR%%.0.8+up0.11.6"
         - prettyName: RancherTurtles
           releaseName: rancher-turtles
           chart: "%%CHART_REPO%%/%%CHART_PREFIX%%rancher-turtles"
-          version: "%%CHART_MAJOR%%.0.3+up0.20.0"
+          version: "%%CHART_MAJOR%%.0.4+up0.20.0"

upgrade-controller-chart/Chart.yaml

@@ -1,5 +1,5 @@
-#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.1_up0.1.1
-#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.0_up0.1.1-%RELEASE%
+#!BuildTag: %%CHART_PREFIX%%upgrade-controller:%%CHART_MAJOR%%.0.1_up0.1.1-%RELEASE%
 apiVersion: v2
 appVersion: 0.1.1
 dependencies:
@@ -10,4 +10,4 @@ dependencies:
 description: A Helm chart for Upgrade Controller
 name: upgrade-controller
 type: application
-version: "%%CHART_MAJOR%%.0.0+up0.1.1"
+version: "%%CHART_MAJOR%%.0.1+up0.1.1"