perl-Perl-Tidy/perl-Perl-Tidy.changes

-------------------------------------------------------------------
Sat Jul 12 05:36:54 UTC 2025 - Tina Müller <timueller+perl@suse.de>

- updated to 20250711.0.0 (20250711)
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2025 07 11
      - Update for issue git #187: add vertical alignment of colons
        used as attribute separators. These colons have token type 'A',
        and this vertical alignment will be on by default (since all
        vertical alignments occur by default).  For example:
          # old default
          field $tile_size : param;
          field $bar : reader : writer;
          # new default with alignment of token type 'A'
          field $tile_size  : param;
          field $bar        : reader : writer;
        This alignment can be turned off to recover the previous formatting
        with --valign-exclusion-list='A', or -vxl='A'.
      - Update for issue git #186: if a closing format skipping comment
        '#>>>' is encountered before any '#<<<' is seen, then format
        skipping is assumed to start with the first line of the file.
        Use --nodetect-format-skipping-from-start or -ndfsfs to prevent
        this check.
      - Added option --code-skipping-from-start, or -csfs. This causes
        code-skipping to begin from the start of a file even though there
        is no starting marker comment, '#<<V'.
      - Fixed a bug involving the --format-skipping option. If a line in
        the skipped code had trailing blanks, then the newline at the end
        of that line was lost.
      - Added a check to insure that format skipping begin and end markers
        strictly alternate along the lines of a file. If these markers
        do not alternate, a warning occurs and formatting is skipped.
        This is intended to help catch errors.
      - For lists which contain here docs and which are formatted with
        the --line-up-parentheses option, the formatting may in some
        cases change to more closely follow the -lp style.

-------------------------------------------------------------------
Mon Jun 16 05:39:09 UTC 2025 - Tina Müller <timueller+perl@suse.de>

- updated to 20250616.0.0 (20250616)
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2025 06 16
      - Added support for the assigning logical xor ^^= operator
      - For input parameters which allow a paren type to be selected, the
        selection 'f' (function call) now includes functions called with
        a direct arrow before the paren, '->('. This was an oversight which
        has been corrected.
      - A new parameter --break-at-old-comma-types=s, or -boct=s, allows the
        parameter --break-at-old-comma-breakpoints (-boc) to be limited to
        selected container types.  For example, -boc -boct='f(' means break
        at old commas but only if they are function call lists.
      - A new parameter --cuddled-paren-brace-weld, or -cpbw, has been added to
        handle issue git #184. This modifies --cuddled-paren-brace by
        preventing a paren and following brace from getting separated in
        certain situations. The difference is illustrated here:
          # perltidy -cpb alone has no effect for this short snippet:
          if (   $Kouter_opening == $Kfirst
              && $has_tight_paren{$type_prev} )
          {
              $Kref = $Kprev;
          }
          # perltidy -cpb -cpbw keeps the closing paren next to the opening brace:
          if (
                 $Kouter_opening == $Kfirst
              && $has_tight_paren{$type_prev}
          ) {
              $Kref = $Kprev;
          }
      - The parameter --maximum-fields-per-table, or -mft, now accepts a string
        input which can limit its application to certain containers. For
        example, -mft='f(1' means that function call lists should be formatted
        with just 1 item per line. It has no effect on other tables. The
        manual has further information.
      - Add option --break-open-compact-parens=s, discussed in git #78.
        This changes the default formatting for lists which would normally
        be displayed compactly on two lines. It causes them to be formatted
        in the same way as long lists, with line breaks at the opening and
        closing parentheses.
      - Add option --skip-formatting-except-id=NAME, or -sfei=NAME, discussed
        in git #183.  This allows formatting to apply only to lines tagged
        with #<<< id=NAME, where NAME is a user-defined tag. The special
        variation -sfei='-' can be used to run perltidy with full checking
        but without any formatting changes.
      - A relatively rare problem with the formatting combination -xci and -lp or
        -xlp has been fixed.  Some lines had more leading spaces that intended.
      - New option -m added to --dump-mismatched-returns and
        --warn-mismatched-returns. This checks for multiple array
        return sizes. A warning occurs when a sub has multiple returns
        of finite lists with different counts greater than 1, and
        not all of them are matched with calls.
      - Improved support for Object::Pad, see git #182.
      - A limitation on the treatment  of lexical subs has been fixed. Previously,
        a lexical sub with the same name as a quote operator would produce a warning,
        and might cause a tokenization error.
      - Here targets in quotes are now located and handled correctly.

-------------------------------------------------------------------
Wed Mar 12 05:43:42 UTC 2025 - Tina Müller <timueller+perl@suse.de>

- updated to 20250311.0.0 (20250311)
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2025 03 11
      - The options --want-call-parens and --nowant-call-parens were accidentally
        being skipped in version 20250214. This has been fixed.
      - Fixed git #32, a tokenization error with message "hit EOF seeking end of
        quote/pattern" for a function call without paren or arg before a
        ternary operator.
      - A new option --dump-similar-keys will dump hash keys which are
        similar but slightly different to standard output and then exit.
        A related option --warn-similar-keys will report keys with are similar
        to the error output while formatting. Both of these can be controlled
        by parameters which are described in the input manual.
      - A new option --dump-hash-keys will dump all hash keys found by
        perltidy to standard output.
      - The output table for --dump-block-summary has an additional field.
        It is an alternate McCabe complexity count which is the same as
        the previous count except for subs. For subs, the complexity number
        is reduced by the values for any contained anonymous subs.
      - Fix git #181, remove continuation indentation from closing brace
        of an anonymous sub which terminates an input stream.

-------------------------------------------------------------------
Thu Feb 13 16:25:55 UTC 2025 - Tina Müller <timueller+perl@suse.de>

- updated to 20250214.0.0 (20250214)
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2025 02 14
      - A new option --keep-old-blank-lines-exceptions=s, or --kblx=s,
        allows selected blank lines to be ignored when an input stream
        is read. The parameter s is used to select the blank lines to
        be ignored. This option provides an inverse to other blank line
        parameters. The manual has details. See discussion git #180.
      - A new option --warn-unused-keys, or -wuk, has been added which will
        produce warnings for unused hash keys during formatting. This is similar
        to --dump-unused-keys, which just exits and does not continue formatting.
        A related new parameter --warn-unused-keys-cutoff=N provides control
        over a filter which prevents warnings for keys which appear to be
        members of large hashes used to communicate with external packages.
        The manual has details.  See git #177.
      - A new option --pack-opening-types='->' has been added to provide more
        control over breaks of method call chains.  It tells perltidy not to
        break at every method call when a chain of calls spans multiple lines.
        This was the behavior in versions prior to 20250105. The default
        starting with 20250105 is to break at each call of a method call chain
        which spans multiple lines. See git #171.

-------------------------------------------------------------------
Sun Jan  5 05:32:07 UTC 2025 - Tina Müller <timueller+perl@suse.de>

- updated to 20250105.0.0 (20250105)
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2025 01 05
      - If a file consists only of comments, then the starting indentation will
        be guessed from the indentation of the first comment. Previously it would
        be guessed to be zero. Parameter --starting-indentation-level=n can be
        used to specify an indentation and avoid a guess. This issue can
        arise when formatting a block of comments from within an editor.
      - Added missing 'use File::Temp' for -html option. This was causing the
        message: "Undefined subroutine &File::Temp::tempfile called at ..."
        See git #176.
      - A new parameter --dump-unique-keys, or -duk, dumps a list of hash keys
        which appear to be used just once, and do not appear among the quoted
        strings in a file. For example:
           perltidy -duk File.pm >output.txt
        This can help locate misspelled hash keys.
      - Line breaks at long chains of method calls now break at all calls
        with args in parens, as in this example from git #171
          # Old default
          sub bla_p( $value = 42 ) {
              return Mojo::Promise->resolve($value)->then( sub { shift() / 2 } )
                ->then( sub { shift() + 6 } )->then( sub { shift() / 2 } )
                ->catch( sub { warn shift } );
          }
          # New default
          sub bla_p( $value = 42 ) {
              return Mojo::Promise->resolve($value)
                ->then( sub { shift() / 2 } )
                ->then( sub { shift() + 6 } )
                ->then( sub { shift() / 2 } )
                ->catch( sub { warn shift } );
          }
      - Parameter --break-at-old-method-breakpoints, or -bom, has been
      updated to insure that it only applies to lines beginning with
      method calls, as intended.  Line breaks for all lines beginning with
      '->', even non-method calls, can be retained by using
      --keep-old-breakpoints_before='->'.
      - Added parameter --multiple-token-tightness=s, or -mutt=s.
      The default value --paren-tightness=1 adds space within the parens
      if, and only if, the container holds multiple tokens.  Some perltidy
      tokens may be rather long, and it can be preferable to also space some of
      them as if they were multiple tokens.  This can be done with this parameter,
      and it applies to parens as well as square brackets and curly braces.
      For example, the default below has no space within the square brackets:
          # perltidy
          my $rlist = [qw( alpha beta gamma )];
      Spaces can be obtained with:
          # perltidy -mutt='q*'
          my $rlist = [ qw( alpha beta gamma ) ];
      The parameter -mutt='q*' means treat qw and similar quote operators as
      multiple tokens.  The manual has details; git #120 has another example.
      - Added parameter --indent-leading-semicolon, -ils; see git #171. When
      this is negated, a line with a leading semicolon does not get the extra
      leading continuation indentation spaces (defined with -ci=n).
      - Space around here doc delimiters follow spacing controls better. For
      example, a space is now added before the closing paren here:
         OLD: (without the here doc):
         push( @script, <<'EOT');
         NEW:
         push( @script, <<'EOT' );
      Also, any spaces between the '<<' and here target are removed (git #174):
         OLD:
         push( @script, <<  'EOT');
         NEW:
         push( @script, <<'EOT' );
      - Added parameter --break-at-trailing-comma-types=s, or -btct=s, where
      s is a string which selects trailing commas.  For example, -btct='f(b'
      places a line break after all bare trailing commas in function calls.
      The manual has details.
      - Fix git #165, strings beginning with v before => gave an incorrect error
      message.
      - The parameter --add-lone-trailing-commas, -altc, is now on by default.
      This will simplify input for trailing comma operations. Use
      --noadd-lone-trailing-commas, or -naltc to turn it off.
      - More edge cases for adding and deleting trailing commas are now handled
      (git #156).
      - A problem has been fixed in which the addition or deletion of trailing
      commas with the -atc or -dtc flags did not occur due to early convergence
      when the -conv flag was set (git #143).
      - Added parameter --qw-as-function, or -qwaf, discussed in git #164.
      When this parameter is set, a qw list which begins with 'qw(' is
      formatted as if it were a function call with call args being a list
      of comma-separated quoted items. For example, given this input:
      @fields = qw( $st_dev	   $st_ino    $st_mode $st_nlink   $st_uid
        $st_gid $st_rdev    $st_size $st_atime   $st_mtime  $st_ctime
        $st_blksize $st_blocks);
      # perltidy -qwaf
      @fields = qw(
          $st_dev   $st_ino   $st_mode  $st_nlink
          $st_uid   $st_gid   $st_rdev  $st_size
          $st_atime $st_mtime $st_ctime $st_blksize
          $st_blocks
      );

-------------------------------------------------------------------
Wed Sep  4 05:34:24 UTC 2024 - Tina Müller <timueller+perl@suse.de>

- updated to 20240903.0.0 (20240903)
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2024 09 03
      - Add partial support for Syntax::Operator::In and Syntax::Keyword::Match
        (see git #162).
      - Add --timeout-in-seconds=n, or -tos=n.  When the standard input supplies
        the input stream, and the input has not been received within n seconds,
        perltidy will end with a timeout message.  The intention is to catch
        a situation where perltidy is accidentally invoked without a file to
        process and therefore waits for input from the system standard input
        (stdin), which never arrives.  The default is n=10.
        This check can be turned off with -tos=0.
      - Add parameter --closing-side-comment-exclusion-list=string, or
        -cscxl=string, where string is a list of block types to exclude
        for closing side comment operations.  Also, closing side comments
        now work for anonymous subs if a --closing-side-comment-list (-cscl)
        is not specified, and when 'asub' is requested with -cscl=asub.
        Use -cscxl=asub to prevent this.
      - Include check for unused constants in --dump-unusual-variables and
        --warn-variable-types (new issue type 'c'). Also expand checks to
        cover variables introduced with 'use vars'.
      - Include signature variables in --dump-unusual-variables and
        --warn-variable-types; see git #158.
      - Add logical xor operator ^^ available in perl version 5.40, as
        noted in git #157.
      - Keyword 'state' now has default space before a paren, like 'my'.
        Previously there was no space and no control.  So the default
        is now "state ($x)". This space can be removed with -nsak='state'.
      - Add options --add-lone-trailing-commas, -altc and
        --delete-lone-trailing-commas, -dltc, to provide control over adding
        and deleting the only comma in a list.  See discussion in git #143
        and the updated manual.
      - Add options --dump-mismatched-returns (or -dmr) and
        --warn-mismatched-returns (or -wmr).  These options report function
        calls where the number of values requested may disagree with sub
        return statements.  The -dump version writes the results for a single
        file to standard output and exits:
           perltidy -dmr somefile.pl >results.txt
        The -warn version formats as normal but reports any issues as warnings in
        the error file:
           perltidy -wmr somefile.pl
        The -warn version may be customized with the following additional
        parameters if necessary to avoid needless warnings:
        --warn-mismatched-return-types=s (or -wmrt=s),
        --warn-mismatched-return-exclusion-list=s (or -wmrxl=s)
        where 's' is a control string. These are explained in the manual.
      - Updates for issue git #151:
        (1) --warn-variable-types=u is now okay if a named file is processed.
        (2) --warn-variable-exclusion-list=s now allows leading and/or
        trailing * on variable names to allow a wildcard match. For example
        -wvxl='*_unused' is okay and would match $var1_unused and $var2_unused.
        (3) --dump-unusual-variables now outputs the filename.
      - A option was added to filter unimplemented parameters from perltidy
        configuration files, suggested in git #146.  It works like this: if
        a line in the config file begins with three dashes followed by a
        parameter name (rather than two dashes), then the line will be removed
        if the parameter is unknown. Otherwise, a dash will be removed to make
        the line valid.
      - Parameters --dump-mismatched-args (or -dma) and
        --warn-mismatched-args (or -wma) have been updated to catch more
        arg count issues.
      - Fixed issue git #143, extend -add-trailing-commas to apply to a list
        with just a fat comma.
      - The minimum perl version is 5.8.1. Previously it was 5.8.0, which was
        not correct because of the use of utf8::is_utf8.
      - Fixed issue git #142, test failure installing on perl versions before
        version 5.10.  The error caused the new parameter
        -interbracket-arrow-style=s not to work. Except for this limitation,
        Version 20240511 will work on older perl versions.

-------------------------------------------------------------------
Sat May 11 03:07:59 UTC 2024 - Tina Müller <timueller+perl@suse.de>

- updated to 20240511
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2024 05 11
      - The option --valign-signed-numbers, or -vsn is now the default. It
        was introduced in the previous release has been found to significantly
        improve the overall appearance of columns of signed and unsigned
        numbers.  See the previous Change Log entry for an example.
        This will change the formatting in scripts with columns
        of vertically aligned signed and unsigned numbers.
        Use -nvsn to turn this option off and avoid this change.
      - Previously, a line break was made before a short concatenated terminal
        quoted string, such as "\n", if the previous line had a greater
        starting indentation. The break is now placed after the short quote.
        This keeps code a little more compact. For example:
      # old rule: break before "\n" here because '$name' has more indentation:
      my $html = $this->SUPER::genObject( $query, $bindNode, $field . ":$var",
          $name, "remove", "UNCHECKED" )
        . "\n";
      # new rule: break after a short terminal quote like "\n" for compactness;
      my $html = $this->SUPER::genObject( $query, $bindNode, $field . ":$var",
          $name, "remove", "UNCHECKED" ) . "\n";
      - The option --delete-repeated-commas is now the default.
        It makes the following checks and changes:
        - Repeated commas like ',,' are removed with a warning
        - Repeated fat commas like '=> =>' are removed with a warning
        - The combination '=>,' produces a warning but is not changed
        These warnings are only output if --warning-output, or -w, is set.
        Use --nodelete-repeated-commas, or -ndrc, to retain repeated commas.
      - The operator ``**=`` now has spaces on both sides by default. Previously,
        there was no space on the left.  This change makes its spacing the same
        as all other assignment operators. The previous behavior can be obtained
        with the parameter setting -nwls='**='.
      - The option --file-size-order, or -fso is now the default. When
        perltidy is given a list of multiple filenames to process, they
        are sorted by size and processed in order of increasing size.
        This can significantly reduce memory usage by Perl.  This
        option has always been used in testing, where typically several
        jobs each operating on thousands of filenames are running at the
        same time and competing for system resources.  If this option
        is not wanted for some reason, it can be deactivated with -nfso.
      - In the option --dump-block-summary, the number of sub arguments indicated
        for each sub now includes any leading object variable passed with
        an arrow-operator call.  Previously the count would have been decreased
        by one in this case. This change is needed for compatibility with future
        updates.
      - Fix issue git #138 involving -xlp (--extended-line-up-parentheses).
        When multiple-line quotes and regexes have long secondary lines, these
        line lengths could influencing some spacing and indentation, but they
        should not have since perltidy has no control over their indentation.
        This has been fixed. This will mainly influence code which uses -xlp
        and has long multi-line quotes.
      - Add option --minimize-continuation-indentation, -mci (see git #137).
        This flag allows perltidy to remove continuation indentation in some
        special cases where it is not really unnecessary. For a simple example,
        the default formatting for the following snippet is:
          # perltidy -nmci
          $self->blurt( "Error: No INPUT definition for type '$type', typekind '"
                . $type->xstype
                . "' found" );
        The second and third lines are one level deep in a container, and
        are also statement continuations, so they get indented by the sum
        of the -i value and the -ci value.  If this flag is set, the
        indentation is reduced by -ci spaces, giving
          # perltidy -mci
          $self->blurt( "Error: No INPUT definition for type '$type', typekind '"
              . $type->xstype
              . "' found" );
        This situation is relatively rare except in code which has long
        quoted strings and the -nolq flag is also set.  This flag is currently
        off by default, but it could become the default in a future version.
      - Add options --dump-mismatched-args (or -dma) and
        --warn-mismatched-arg (or -wma).  These options look
        for and report instances where the number of args expected by a
        sub appear to differ from the number passed to the sub.  The -dump
        version writes the results for a single file to standard output
        and exits:
           perltidy -dma somefile.pl >results.txt
        The -warn version formats as normal but reports any issues as warnings in
        the error file:
           perltidy -wma somefile.pl
        The -warn version may be customized with the following additional parameters
        if necessary to avoid needless warnings:
        --warn-mismatched-arg-types=s (or -wmat=s),
        --warn-mismatched-arg-exclusion-list=s (or -wmaxl=s), and
        --warn-mismatched-arg-undercount-cutoff=n (or -wmauc=n).
        --warn-mismatched-arg-overcount-cutoff=n (or -wmaoc=n).
        These are explained in the manual.
      - Add option --valign-wide-equals, or -vwe, for issue git #135.
        Setting this parameter causes the following assignment operators
           = **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x=
        to be aligned vertically with the ending = all aligned. For example,
        here is the default formatting of a snippet of code:
              $str .= SPACE x $total_pad_count;
              $str_len += $total_pad_count;
              $total_pad_count = 0;
              $str .= $rfields->[$j];
              $str_len += $rfield_lengths->[$j];
        And here is the same code formatted with -vwe:
              # perltidy -vwe
              $str             .= SPACE x $total_pad_count;
              $str_len         += $total_pad_count;
              $total_pad_count  = 0;
              $str             .= $rfields->[$j];
              $str_len         += $rfield_lengths->[$j];
        This option currently is off by default to avoid changing existing
        formatting.
      - Added control --delete-interbracket-arrows, or -dia, to delete optional
        hash ref and array ref arrows between brackets as in the following
        expression (see git #131)
          return $self->{'commandline'}->{'arg_list'}->[0]->[0]->{'hostgroups'};
          # perltidy -dia gives:
          return $self->{'commandline'}{'arg_list'}[0][0]{'hostgroups'};
        Added the opposite control --aia-interbracket-arrows, or -aia, to
        add arrows. So applied to the previous line the arrows are restored:
          # perltidy -aia
          return $self->{'commandline'}->{'arg_list'}->[0]->[0]->{'hostgroups'};
       The manual describes additional controls for adding and deleting
       just selected interbracket arrows.

-------------------------------------------------------------------
Fri Mar  8 22:56:24 UTC 2024 - Tina Müller <tina.mueller@suse.com>

- Fix disabling of __perllib_provides

-------------------------------------------------------------------
Fri Feb  2 03:08:05 UTC 2024 - Tina Müller <timueller+perl@suse.de>

- updated to 20240202
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2024 02 02
      - Added --valign-signed-numbers, or -vsn. This improves the appearance
        of columns of numbers by aligning leading algebraic signs.  For example:
              # perltidy -vsn
              my $xyz_shield = [
                  [ -0.060,  -0.060,  0. ],
                  [  0.060,  -0.060,  0. ],
                  [  0.060,   0.060,  0. ],
                  [ -0.060,   0.060,  0. ],
                  [ -0.0925, -0.0925, 0.092 ],
                  [  0.0925, -0.0925, 0.092 ],
                  [  0.0925,  0.0925, 0.092 ],
                  [ -0.0925,  0.0925, 0.092 ],
              ];
              # perltidy -nvsn (current DEFAULT)
              my $xyz_shield = [
                  [ -0.060,  -0.060,  0. ],
                  [ 0.060,   -0.060,  0. ],
                  [ 0.060,   0.060,   0. ],
                  [ -0.060,  0.060,   0. ],
                  [ -0.0925, -0.0925, 0.092 ],
                  [ 0.0925,  -0.0925, 0.092 ],
                  [ 0.0925,  0.0925,  0.092 ],
                  [ -0.0925, 0.0925,  0.092 ],
              ];
        This new option works well but is currently OFF to allow more testing
        and fine-tuning. It is expected to be activated in a future release.
      - Added --dump-mixed-call-parens (-dmcp ) which will dump a list of
        operators which are sometimes followed by parens and sometimes not.
        This can be useful for developing a uniform style for selected operators.
        Issue git #128. For example
           perltidy -dmcp somefile.pl >out.txt
        produces lines like this, where the first number is the count of
        uses with parens, and the second number is the count without parens.
          k:caller:2:1
          k:chomp:3:4
          k:close:7:4
      - Added --want-call-parens=s (-wcp=s) and --nowant-call-parens=s (-nwcp=s)
        options which will warn of paren uses which do not match a selected
        style. The manual has details. But for example,
          perltidy -wcp='&' somefile.pl
        will format as normal but warn if any user subs are called without parens.
      - Added --dump-unusual-variables (-duv) option to dump a list of
        variables with certain properties of interest.  For example
           perltidy -duv somefile.pl >vars.txt
        produces a file with lines which look something like
           1778:u: my $input_file
           6089:r: my $j: reused - see line 6076
        The values on the line which are separated by colons are:
          line number   - the number of the line of the input file
          issue         - a single letter indicating the issue, see below
          variable name - the name of the variable, preceded by a keyword
          note          - an optional note referring to another line
        The issue is indicated by a letter which may be one of:
          r: reused variable name
          s: sigil change but reused bareword
          p: lexical variable with scope in multiple packages
          u: unused variable
        This is very useful for locating problem areas and bugs in code.
      - Added a related flag --warn-variable-types=string (-wvt=string) option
        to warn if certain types of variables are found in a script. The types
        are a space-separated string which may include 'r', 's', and 'p' but
        not 'u'. For example
          perltidy -wvt='r s' somefile.pl
        will check for and warn if any variabls of type 'r', or 's' are seen,
        but not 'p'. All possible checks may be indicated with a '*' or '1':
          perltidy -wvt='*' somefile.pl
        The manual has further details.
      - All parameters taking integer values are now checked for
        out-of-range values before processing starts. When a maximum or
        maximum range is exceeded, the new default behavior is to write a
        warning message, reset the value to its default setting, and continue.
        This default behavior can be changed with the new parameter
        --integer-range-check=n, or -irc=n, as follows:
          n=0  skip check completely (for stress-testing perltidy only)
          n=1  reset bad values to defaults but do not issue a warning
          n=2  reset bad values to defaults and issue a warning [DEFAULT]
          n=3  stop immediately if any values are out of bounds
        The settings n=0 and n=1 are mainly useful for testing purposes.
      - The --dump-block-summary (-dbs) option now includes the number of sub
        args in the 'type' column. For example, 'sub(9)' indicates a sub
        with 9 args.  Subs whose arg count cannot easily be determined are
        indicated as 'sub(*)'. The count does not include a leading '$self'
        or '$class' arg.
      - Added flag --space-signature-paren=n, or -ssp=n (issue git #125).
        This flag works the same as the existing flag --space-prototype-paren=n
        except that it applies to the space before the opening paren of a sub
        signature instead of a sub prototype.  Previously, there was no control
        over this (a space always occurred). For example, given the following
        line:
          sub circle( $xc, $yc, $rad );
        The following results can now be obtained, according to the value of n:
          sub circle( $xc, $yc, $rad );   # n=0 [no space]
          sub circle( $xc, $yc, $rad );   # n=1 [default; same as input]
          sub circle ( $xc, $yc, $rad );  # n=2 [space]
        The spacing in previous versions of perltidy corresponded to n=2 (always
        a space). The new default value, n=1, will produce a space if and only
        if there was a space in the input text.
      - The --dump-block-summary option can report an if-elsif-elsif-.. chain
        as a single line item with the notation -dbt='elsif3', for example,
        where the '3' is an integer which specifies the minimum number of elsif
        blocks required for a chain to be reported. The manual has details.
      - Fix problem c269, in which the new -ame parameter could incorrectly
        emit an else block when two elsif blocks were separated by a hanging
        side comment (a very rare situation).
      - When braces are detected to be unbalanced, an attempt is made to
        localize the error by comparing the indentation at closing braces
        with their actual nesting levels. This can be useful for files which
        have previously been formatted by perltidy. To illustrate, a test was
        made in which the closing brace at line 30644 was commented out in
        a file with a total of over 62000 lines.  The new error message is
          Final nesting depth of '{'s is 1
          The most recent un-matched '{' is on line 6858
          ...
          Table of nesting level differences at closing braces.
          This might help localize brace errors if the file was previously formatted.
          line:  (brace level) - (level expected from old indentation)
          30643: 0
          30645: 1
        Previously, the error file only indicated that the error in this case
        was somewhere after line 6858, so the new table is very helpful. Closing
        brace indentation is checked because it is unambiguous and can be done
        very efficiently.
      - The -DEBUG option no longer automatically also writes a .LOG file.
        Use --show-options if the .LOG file is needed.
      - The run time of this version with all new options in use is no greater
        than that of the previous version thanks to optimization work.

-------------------------------------------------------------------
Wed Sep 13 03:08:55 UTC 2023 - Tina Müller <timueller+perl@suse.de>

- updated to 20230912
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2023 09 12

      - Fix for git #124: remove a syntax error check which could cause
        an incorrect error message when List::Gather::gather was used.

-------------------------------------------------------------------
Sat Sep  9 03:08:04 UTC 2023 - Tina Müller <timueller+perl@suse.de>

- updated to 20230909
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2023 09 09
      - Added new parameters -wme, or --warn-missing-else, and -ame,
        or --add-missing else.  The parameter -wme tells perltidy to issue
        a warning if an if-elsif-... chain does not end in an else block.
        The parameter -ame tells perltidy to insert an else block at the
        end of such a chain if there is none.
        For example, given the following snippet:
          if    ( $level == 3 ) { $val = $global{'section'} }
          elsif ( $level == 2 ) { $val = $global{'chapter'} }
        # perltidy -ame
          if    ( $level == 3 ) { $val = $global{'section'} }
          elsif ( $level == 2 ) { $val = $global{'chapter'} }
          else {
              ##FIXME - added with perltidy -ame
          }
        The resulting code should be carefully reviewed, and the ##FIXME comment
        should be updated as appropriate.  The text of the ##FIXME comment can be
        changed with parameter -amec=s, where 's' is the comment to mark the new
        else block. The man pages have more details.
      - The syntax of the parameter --use-feature=class, or -uf=class, which
        new in the previous release, has been changed slightly for clarity.
        The default behavior, which occurs if this flag is not entered, is
        to automatically try to handle both old and new uses of the keywords
        'class', 'method', 'field', and 'ADJUST'.
        To force these keywords to only follow the -use feature 'class' syntax,
        enter --use-feature=class.
        To force perltidy to ignore the -use feature 'class' syntax, enter
        --use-feature=noclass.
      - Issue git #122. Added parameter -lrt=n1:n2, or --line-range-tidy=n1:n2
        to limit tidy operations to a limited line range.  Line numbers start
        with 1. This parameter is mainly of interest to editing programs which
        drive perltidy. The man pages have details.
      - Some fairly rare instances of incorrect spacing have been fixed.  The
        problem was that the tokenizer being overly conservative in marking
        terms as possible filehandles or indirect objects. This causes the space
        after the possible filehandle to be frozen to its input value in order not
        to introduce an error in case Perl had to guess.  The problem was fixed
        by having the tokenizer look ahead for operators which can eliminate the
        uncertainty.  To illustrate, in the following line the term ``$d`` was
        previously marked as a possible filehandle, so no space was added after it.
            print $d== 1 ? " [ON]\n" : $d ? " [$d]\n" : "\n";
                    ^
        In the current version, the next token is seen to be an equality, so
        ``$d`` is marked as an ordinary identifier and normal spacing rules
        can apply:
            print $d == 1 ? " [ON]\n" : $d ? " [$d]\n" : "\n";
                    ^
      - This version runs 7 to 10 percent faster than the previous release on
        large files, depending on options and file type. Much of the gain comes
        from streamlined I/O operations.
      - This version was stress-tested for many cpu hours with random
        input parameters. No failures to converge, internal fault checks,
        undefined variable references or other irregularities were seen.

-------------------------------------------------------------------
Sun Jul  2 03:07:10 UTC 2023 - Tina Müller <timueller+perl@suse.de>

- updated to 20230701
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2023 07 01
      - Issue git #121. Added parameters -xbt, or --extended-block-tightness,
        and -xbtl=s, or --extended-block-tightness-list=s, to allow
        certain small code blocks to have internal spacing controlled by
        -bbt=n rather than -bt=n. The man pages have details.
      - Issue git #118. A warning will be issued if a duplicate format-skipping
        starting marker is seen within a format-skipping section. The same
        applies to duplicate code-skipping starting markers within code-skipping
        sections.
      - Issue git #116. A new flag --valign-if-unless, -viu, was added to
        allow postfix 'unless' terms to align with postfix 'if' terms.  The
        default remains not to do this.
      - Fixed git #115. In the two most recent CPAN releases, when the
        Perl::Tidy module was called with the source pointing to a file,
        but no destination specified, the output went to the standard
        output instead of to a file with extension ``.tdy``, as it should
        have.  This has been fixed.
      - Fixed git #110, add missing documentation for new options
        -cpb and -bfvt=n. These work in version 20230309 but the pod
        documentation was missing and has been added.
      - Fixed an undefined reference message when running with
        --dump-block-summary on a file without any subs or other
        selected block types.
      - Add parameter -ipc, or --ignore-perlcritic-comments.  Perltidy, by
        default, will look for side comments beginning with ``## no critic`` and
        ignore their lengths when making line break decisions, even if the user
        has not set ``-iscl``.  The reason is that an unwanted line break can
        make these special comments ineffective in controlling ``perlcritic``.
        The parameter -ipc can be set if, for some reason, this is not wanted.
      - Some minor issues with continuation indentation have been fixed.
        Most scripts will remain unchanged.  The main change is that block
        comments which occur just before a closing brace, bracket or paren
        now have an indentation which is independent of the existance of
        an optional comma or semicolon.  Previously, adding or deleting
        an optional trailing comma could cause their indentation to jump.
        Also, indentation of comments within ternary statements has been
        improved. For additonal details see:
        https://github.com/perltidy/perltidy/blob/master/docs/ci_update.md
      - This version was stress-tested for many cpu hours with random
        input parameters. No failures to converge, internal fault checks,
        undefined variable references or other irregularities were seen.
      - This version runs several percent faster than the previous release
        on large files.

-------------------------------------------------------------------
Thu Mar  9 03:07:14 UTC 2023 - Tina Müller <timueller+perl@suse.de>

- updated to 20230309
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2023 03 09
      - No significant bugs have been found since the last release to CPAN.
        Several minor issues have been fixed, and some new parameters have been
        added, as follows:
      - Added parameter --one-line-block-exclusion-list=s, or -olbxl=s, where
        s is a list of block types which should not automatically be turned
        into one-line blocks.  This implements the issue raised in PR #111.
        The list s may include any of the words 'sort map grep eval', or
        it may be '*' to indicate all of these.  So for example to prevent
        multi-line 'eval' blocks from becoming one-line blocks, the command
        would be -olbxl='eval'.
      - For the -b (--backup-and-modify-in-place) option, the file timestamps
        are changing (git #113, rt#145999).  First, if there are no formatting
        changes to an input file, it will keep its original modification time.
        Second, any backup file will keep its original modification time.  This
        was previously true for --backup-method=move but not for the default
        --backup-method=copy.  The purpose of these changes is to avoid
        triggering Makefile operations when there are no actual file changes.
        If this causes a problem please open an issue for discussion on github.
      - A change was made to the way line breaks are made at the '.'
        operator when the user sets -wba='.' to requests breaks after a '.'
        ( this setting is not recommended because it can be hard to read ).
        The goal of the change is to make switching from breaks before '.'s
        to breaks after '.'s just move the dots from the end of
        lines to the beginning of lines.  For example:
              # default and recommended (--want-break-before='.'):
              $output_rules .=
                (     'class'
                    . $dir
                    . '.stamp: $('
                    . $dir
                    . '_JAVA)' . "\n" . "\t"
                    . '$(CLASSPATH_ENV) $(JAVAC) -d $(JAVAROOT) '
                    . '$(JAVACFLAGS) $?' . "\n" . "\t"
                    . 'echo timestamp > class'
                    . $dir
                    . '.stamp'
                    . "\n" );
              # perltidy --want-break-after='.'
              $output_rules .=
                ( 'class' .
                    $dir .
                    '.stamp: $(' .
                    $dir .
                    '_JAVA)' . "\n" . "\t" .
                    '$(CLASSPATH_ENV) $(JAVAC) -d $(JAVAROOT) ' .
                    '$(JAVACFLAGS) $?' . "\n" . "\t" .
                    'echo timestamp > class' .
                    $dir .
                    '.stamp' .
                    "\n" );
        For existing code formatted with -wba='.', this may cause some
        changes in the formatting of code with long concatenation chains.
      - Added option --use-feature=class, or -uf=class, for issue rt #145706.
        This adds keywords 'class', 'method', 'field', and 'ADJUST' in support of
        this feature which is being tested for future inclusion in Perl.
        An effort has been made to avoid conflicts with past uses of these
        words, especially 'method' and 'class'. The default setting
        is --use-feature=class. If this causes a conflict, this option can
        be turned off by entering -uf=' '.
        In other words, perltidy should work for both old and new uses of
        these keywords with the default settings, but this flag is available
        if a conflict arises.
      - Added option -bfvt=n, or --brace-follower-vertical-tightness=n,
        for part of issue git #110.  For n=2, this option looks for lines
        which would otherwise be, by default,
        }
          or ..
        and joins them into a single line
        } or ..
        where the or can be one of a number of logical operators or if unless.
        The default is not to do this and can be indicated with n=1.
      - Added option -cpb, or --cuddled-paren-brace, for issue git #110.
        This option will cause perltidy to join two lines which
        otherwise would be, by default,
          )
        {
        into a single line
        ) {
      - Some minor changes to existing formatted output may occur as a result
        of fixing minor formatting issues with edge cases.  This is especially
        true for code which uses the -lp or -xlp styles.
      - Added option -dbs, or --dump-block-summary, to dump summary
        information about code blocks in a file to standard output.
        The basic command is:
            perltidy -dbs somefile.pl >blocks.csv
        Instead of formatting ``somefile.pl``, this dumps the following
        comma-separated items describing its blocks to the standard output:
         filename     - the name of the file
         line         - the line number of the opening brace of this block
         line_count   - the number of lines between opening and closing braces
         code_lines   - the number of lines excluding blanks, comments, and pod
         type         - the block type (sub, for, foreach, ...)
         name         - the block name if applicable (sub name, label, asub name)
         depth        - the nesting depth of the opening block brace
         max_change   - the change in depth to the most deeply nested code block
         block_count  - the total number of code blocks nested in this block
         mccabe_count - the McCabe complexity measure of this code block
        This can be useful for code restructuring. The man page for perltidy
        has more information and describes controls for selecting block types.
      - This version was stress-tested for over 100 cpu hours with random
        input parameters. No failures to converge, internal fault checks,
        undefined variable references or other irregularities were seen.
      - This version runs a few percent faster than the previous release on
        large files due to optimizations made with the help of Devel::NYTProf.

-------------------------------------------------------------------
Sat Nov 12 03:08:36 UTC 2022 - Tina Müller <timueller+perl@suse.de>

- updated to 20221112
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2022 11 12
      - Fix rt #145095, undef warning in Perl before 5.12. Version 20221112 is
        identical to 2022111 except for this fix for older versions of Perl.
      - No significant bugs have been found since the last release to CPAN.
        Several minor issues have been fixed, and some new parameters have been
        added, as follows:
      - Fixed rare problem with irregular indentation involving --cuddled-else,
        usually also with the combination -xci and -lp.  Reported in rt #144979.
      - Add option --weld-fat-comma (-wfc) for issue git #108. When -wfc
        is set, along with -wn, perltidy is allowed to weld an opening paren
        to an inner opening container when they are separated by a hash key
        and fat comma (=>).  For example:
          # perltidy -wn
          elf->call_method(
              method_name_foo => {
                  some_arg1       => $foo,
                  some_other_arg3 => $bar->{'baz'},
              }
          );
          # perltidy -wn -wfc
          elf->call_method( method_name_foo => {
              some_arg1       => $foo,
              some_other_arg3 => $bar->{'baz'},
          } );
        This flag is off by default.
      - Fix issue git #106. This fixes some edge cases of formatting with the
        combination -xlp -pt=2, mainly for two-line lists with short function
        names. One indentation space is removed to improve alignment:
          # OLD: perltidy -xlp -pt=2
          is($module->VERSION, $expected,
              "$main_module->VERSION matches $module->VERSION ($expected)");
          # NEW: perltidy -xlp -pt=2
          is($module->VERSION, $expected,
             "$main_module->VERSION matches $module->VERSION ($expected)");
      - Fix for issue git #105, incorrect formatting with 5.36 experimental
        for_list feature.
      - Fix for issue git #103. For parameter -b, or --backup-and-modify-in-place,
        the default backup method has been changed to preserve the inode value
        of the file being formatted.  If this causes a problem, the previous
        method is available and can be used by setting -backup-mode='move', or
        -bm='move'.  The new default corresponds to -bm='copy'.  The difference
        between the two methods is as follows.  For the older method,
        -bm='move', the input file was moved to the backup, and a new file was
        created for the formatted output.  This caused the inode to change.  For
        the new default method, -bm='copy', the input is copied to the backup
        and then the input file is reopened and rewritten. This preserves the
        file inode.  Tests have not produced any problems with this change, but
        before using the --backup-and-modify-in-place parameter please verify
        that it works correctly in your environment and operating system. The
        initial update for this had an error which was caught and fixed
        in git #109.
      - Fix undefined value message when perltidy -D is used (git #104)
      - Fixed an inconsistency in html colors near pointers when -html is used.
        Previously, a '->' at the end of a line got the 'punctuation color', black
        by default but a '->' before an identifier got the color of the following
        identifier. Now all pointers get the same color, which is black by default.
        Also, previously a word following a '->' was given the color of a bareword,
        black by default, but now it is given the color of an identifier.
      - Fixed incorrect indentation of any function named 'err'.  This was
        due to some old code from when "use feature 'err'" was valid.
              # OLD:
              my ($curr) = current();
                err (@_);
              # NEW:
              my ($curr) = current();
              err(@_);
      - Added parameter --delete-repeated-commas (-drc) to delete repeated
        commas. This is off by default. For example, given:
              ignoreSpec( $file, "file",, \%spec, \%Rspec );
        # perltidy -drc:
              ignoreSpec( $file, "file", \%spec, \%Rspec );
      - Add continuation indentation to long C-style 'for' terms; i.e.
              # OLD
              for (
                  $j = $i - $shell ;
                  $j >= 0
                  && ++$ncomp
                  && $array->[$j] gt $array->[ $j + $shell ] ;
                  $j -= $shell
                )
              # NEW
              for (
                  $j = $i - $shell ;
                  $j >= 0
                    && ++$ncomp
                    && $array->[$j] gt $array->[ $j + $shell ] ;
                  $j -= $shell
                )
        This will change some existing formatting with very long 'for' terms.
      - The following new parameters are available for manipulating
        trailing commas of lists. They are described in the manual.
             --want-trailing-commas=s, -wtc=s
             --add-trailing-commas,    -atc
             --delete-trailing-commas, -dtc
             --delete-weld-interfering-commas, -dwic
      - Files with errors due to missing, extra or misplaced parens, braces,
        or square brackets are now written back out verbatim, without any
        attempt at formatting.
      - This version runs 10 to 15 percent faster than the previous
        release on large files due to optimizations made with the help of
        Devel::NYTProf.
      - This version was stress-tested for over 200 cpu hours with random
        input parameters. No failures to converge, internal fault checks,
        undefined variable references or other irregularities were seen.

-------------------------------------------------------------------
Tue Jun 14 03:07:44 UTC 2022 - Tina Müller <timueller+perl@suse.de>

- updated to 20220613
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2022 06 13
      - No significant bugs have been found since the last release but users
        of programs which call the Perl::Tidy module should note the first
        item below, which changes a default setting.  The main change to
        existing formatting is the second item below, which adds vertical
        alignment to 'use' statements.
      - The flag --encode-output-strings, or -eos, is now set 'on' by default.
        This has no effect on the use of the 'perltidy' binary script, but could
        change the behavior of some programs which use the Perl::Tidy module on
        files encoded in UTF-8.  If any problems are noticed, an emergency fix
        can be made by reverting to the old default by setting -neos.  For
        an explanation of why this change needs to be made see:
        https://github.com/perltidy/perltidy/issues/92
        https://github.com/perltidy/perltidy/blob/master/docs/eos_flag.md
      - Added vertical alignment for qw quotes and empty parens in 'use'
        statements (see issue #git 93).  This new alignment is 'on' by default
        and will change formatting as shown below. If this is not wanted it can
        be turned off with the parameter -vxl='q' (--valign-exclude-list='q').
          # old default, or -vxl='q'
          use Getopt::Long qw(GetOptions);
          use Fcntl qw(O_RDONLY O_WRONLY O_EXCL O_CREAT);
          use Symbol qw(gensym);
          use Exporter ();
          # new default
          use Getopt::Long qw(GetOptions);
          use Fcntl        qw(O_RDONLY O_WRONLY O_EXCL O_CREAT);
          use Symbol       qw(gensym);
          use Exporter     ();
      - The parameter -kbb (--keep-break-before) now ignores a request to break
        before an opening token, such as '('.  Likewise, -kba (--keep-break-after)
        now ignores a request to break after a closing token, such as ')'. This
        change was made to avoid a rare instability discovered in random testing.
      - Previously, if a -dsc command was used to delete all side comments,
        then any special side comments for controlling non-indenting braces got
        deleted too. Now, these control side comments are retained when -dsc is
        set unless a -nnib (--nonon-indenting-braces) flag is also set to
        deactivate them.
      - This version runs about 10 percent faster on large files than the previous
        release due to optimizations made with the help of Devel::NYTProf.  Much
        of the gain came from faster processing of blank tokens and comments.
      - This version of perltidy was stress-tested for many cpu hours with
        random input parameters. No failures to converge, internal fault checks,
        undefined variable references or other irregularities were seen.

-------------------------------------------------------------------
Wed Feb 16 03:07:20 UTC 2022 - Tina Müller <timueller+perl@suse.de>

- updated to 20220217
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2022 02 17
      - A new flag, --encode-output-strings, or -eos, has been added to resolve
        issue git #83. This issue involves the interface between Perl::Tidy and
        calling programs, and Code::TidyAll (tidyall) in particular.  The problem
        is that perltidy by default returns decoded character strings, but
        tidyall expects encoded strings.  This flag provides a fix for that.
        So, tidyall users who process encoded (utf8) files should update to this
        version of Perl::Tidy and use -eos for tidyall.  For further info see:
        https://github.com/houseabsolute/perl-code-tidyall/issues/84, and
        https://github.com/perltidy/perltidy/issues/83
        If there are other applications having utf8 problems at the interface
        with Perl::Tidy, this flag probably may need to be set.
      - The default value of the new flag, --encode-output-strings, -eos, is currently
        -neos BUT THIS MAY CHANGE in a future release because the current
        default is inconvenient.  So authors of programs which receive character
        strings back from Perl::Tidy should set this flag, if necessary,
        to avoid any problems when the default changes.  For more information see the
        above links and the Perl::Tidy man pages for example coding.
      - The possible values of the string 's' for the flag '--character-encoding=s'
        have been limited to 'utf8' (or UTF-8), 'none', or 'guess'.  Previously an
        arbitrary encoding could also be specified, but as a result of discussions
        regarding git #83 it became clear that this could cause trouble
        since the output encoding was still restricted to UTF-8. Users
        who need to work in other encodings can write a short program calling
        Perl::Tidy with pre- and post-processing to handle encoding/decoding.
      - A new flag --break-after-labels=i, or -bal=i, was added for git #86.  This
        controls line breaks after labels, to provide a uniform style, as follows:
              -bal=0 follows the input line breaks [DEFAULT]
              -bal=1 always break after a label
              -bal=2 never break after a label
        For example:
            # perltidy -bal=1
            INIT:
              {
                  $xx = 1.234;
              }
            # perltidy -bal=2
            INIT: {
                  $xx = 1.234;
              }
      - Fix issue git #82, an error handling something like ${bareword} in a
        possible indirect object location. Perl allows this, now perltidy does too.
      - The flags -kbb=s or --keep-old-breakpoints-before=s, and its counterpart
        -kba=s or --keep-old-breakpoints-after=s have expanded functionality
        for the container tokens: { [ ( } ] ).  The updated man pages have
        details.
      - Two new flags have been added to provide finer vertical alignment control,
        --valign-exclusion-list=s (-vxl=s) and  --valign-inclusion-list=s (-vil=s).
        This has been requested several times, most recently in git #79, and it
        finally got done.  For example, -vil='=>' means just align on '=>'.
      - A new flag -gal=s, --grep-alias-list=s, has been added as suggested in
        git #77.  This allows code blocks passed to list operator functions to
        be formatted in the same way as a code block passed to grep, map, or sort.
        By default, the following list operators in List::Util are included:
          all any first none notall reduce reductions
        They can be changed with the flag -gaxl=s, -grep-alias-exclusion-list=s
      - A new flag -xlp has been added which can be set to avoid most of the
        limitations of the -lp flag regarding side comments, blank lines, and
        code blocks.  See the man pages for more info. This fixes git #64 and git #74.
        The older -lp flag still works.
      - A new flag -lpil=s, --line-up-parentheses-inclusion-list=s, has been added
        as an alternative to -lpxl=s, --line-up-parentheses-exclusion-list=s.
        It supplies equivalent information but is much easier to describe and use.
        It works for both the older -lp version and the newer -xlp.
      - The coding for the older -lp flag has been updated to avoid some problems
        and limitations.  The new coding allows the -lp indentation style to
        mix smoothly with the standard indentation in a single file.  Some problems
        where -lp and -xci flags were not working well together have been fixed, such
        as happened in issue rt140025.  As a result of these updates some minor
        changes in existing code using the -lp style may occur.
      - This version of perltidy was stress-tested for many cpu hours with
        random input parameters. No failures to converge, internal fault checks,
        undefined variable references or other irregularities were seen.
      - Numerous minor fixes have been made, mostly very rare formatting
        instabilities found in random testing.

-------------------------------------------------------------------
Sat Oct 30 03:06:37 UTC 2021 - Tina Müller <timueller+perl@suse.de>

- updated to 20211029
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2021 10 29
      - No significant bugs have been found since the last release, but several
        minor issues have been fixed.  Vertical alignment has been improved for
        lists of call args which are not contained within parens (next item).
      - Vertical alignment of function calls without parens has been improved with
        the goal of making vertical alignment essentially the same with or
        without parens around the call args.  Some examples:
          # OLD
          mkTextConfig $c, $x, $y, -anchor => 'se', $color;
          mkTextConfig $c, $x + 30, $y, -anchor => 's',  $color;
          mkTextConfig $c, $x + 60, $y, -anchor => 'sw', $color;
          mkTextConfig $c, $x, $y + 30, -anchor => 'e', $color;
          # NEW
          mkTextConfig $c, $x,      $y,      -anchor => 'se', $color;
          mkTextConfig $c, $x + 30, $y,      -anchor => 's',  $color;
          mkTextConfig $c, $x + 60, $y,      -anchor => 'sw', $color;
          mkTextConfig $c, $x,      $y + 30, -anchor => 'e',  $color;
          # OLD
          is id_2obj($id), undef, "unregistered object not retrieved";
          is scalar keys %$ob_reg, 0, "object registry empty";
          is register($obj), $obj, "object returned by register";
          is scalar keys %$ob_reg, 1, "object registry nonempty";
          is id_2obj($id), $obj, "registered object retrieved";
          # NEW
          is id_2obj($id),         undef, "unregistered object not retrieved";
          is scalar keys %$ob_reg, 0,     "object registry empty";
          is register($obj),       $obj,  "object returned by register";
          is scalar keys %$ob_reg, 1,     "object registry nonempty";
          is id_2obj($id),         $obj,  "registered object retrieved";
        This will cause some changes in alignment, hopefully for the better,
        particularly in test code which often uses numerous parenless function
        calls with functions like 'ok', 'is', 'is_deeply', ....
      - Two new parameters were added to control the block types to which the
        -bl (--opening-brace-on-new-line) flag applies.  The new parameters are
        -block-left-list=s, or -bll=s, and --block-left-exclusion-list=s,
        or -blxl=s.  Previously the -bl flag was 'hardwired' to apply to
        nearly all blocks. The default values of the new parameters
        retain the the old default behavior but allow it to be changed.
      - The default behavior of the -bli (-brace-left-and-indent) flag has changed
        slightly.  Previously, if you set -bli, then the -bl flag would also
        automatically be set.  Consequently, block types which were not included
        in the default list for -bli would get -bl formatting.  This is no longer done,
        and these two styles are now controlled independently.  The manual describes
        the controls.  If you want to recover the exact previous default behavior of
        the -bli then add the -bl flag.
      - A partial fix was made for issue for git #74. The -lp formatting style was
        being lost when a one-line anonymous sub was followed by a closing brace.
      - Fixed issue git #73, in which the -nfpva flag was not working correctly.
        Some unwanted vertical alignments of spaced function perens
        were being made.
      - Updated the man pages to clarify the flags -valign and -novalign
        for turning vertical alignment on and off (issue git #72).
        Added parameters -vc -vsc -vbc for separately turning off vertical
        alignment of code, side comments and block comments.
      - Fixed issue git #68, where a blank line following a closing code-skipping
        comment, '#>>V', could be lost.
      - This version runs 10 to 15 percent faster on large files than the
        previous release due to optimizations made with the help of NYTProf.
      - This version of perltidy was stress-tested for many cpu hours with
        random input parameters. No instabilities,  internal fault checks,
        undefined variable references or other irregularities were seen.
      - Numerous minor fixes have been made, mostly very rare formatting instabilities
        found in random testing. An effort has been made to minimize changes to
        existing formatting that these fixes produce, but occasional changes
        may occur. Many of these updates are listed at:
             https://github.com/perltidy/perltidy/blob/master/local-docs/BugLog.pod

-------------------------------------------------------------------
Sun Jul 18 03:07:33 UTC 2021 - Tina Müller <timueller+perl@suse.de>

- updated to 20210717
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2021 07 17
      - This release is being made mainly because of the next item, in which an
        error message about an uninitialized value error message could be produced
        in certain cases when format-skipping is used.  The error message was
        annoying but harmless to formatting.
      - Fixed an undefined variable message, see git #67. When a format skipping
        comment '#<<' is placed before the first line of code in a script, a
        message 'Use of uninitialized value $Ktoken_vars in numeric ...' can
        occur.
      - A warning will no longer be given if a script has an opening code-skipping
        comment '#<<V' which is not terminated with a closing comment '#>>V'. This
        makes code-skipping and format-skipping behave in a similar way: an
        opening comment without a corresponding closing comment will cause
        the rest of a file to be skipped.  If there is a question about which lines
        are skipped, a .LOG file can be produced with the -g flag and it will have
        this information.
      - Removed the limit on -ci=n when -xci is set, reference: rt #136415.
        This update removes a limit in the previous two versions in which the
        value of -ci=n was limited to the value of -i=n when -xci was set.
        This limit had been placed to avoid some formatting instabilities,
        but recent coding improvements allow the limit to be removed.
      - The -wn and -bbxx=n flags were not working together correctly. This has
        been fixed.
      - This version may produce occasional differences in formatting compared to
        previous versions, mainly for lines which are near the specified line
        length limit.  This is due to ongoing efforts to eliminate edge cases of
        formatting instability.
      - Numerous minor fixes have been made. A complete list is at:
             https://github.com/perltidy/perltidy/blob/master/local-docs/BugLog.pod

-------------------------------------------------------------------
Fri Jun 25 03:07:08 UTC 2021 - Tina Müller <timueller+perl@suse.de>

- updated to 20210625
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2021 06 25
      - This release adds several new requested parameters.  No significant bugs have
        been found since the last release, but a number of minor problems have been
        corrected.
      - Added a new option '--code-skipping', requested in git #65, in which code
        between comment lines '#<<V' and '#>>V' is passed verbatim to the output
        stream without error checking.  It is simmilar to --format-skipping
        but there is no error checking of the skipped code. This can be useful for
        skipping past code which employs an extended syntax.
      - Added a new option for closing paren placement, -vtc=3, requested in rt #136417.
      - Added flag -atnl, --add-terminal-newline, to help issue git #58.
        This flag tells perltidy to terminate the last line of the output stream
        with a newline character, regardless of whether or not the input stream
        was terminated with a newline character.  This is the default.
        If this flag is negated, with -natnl, then perltidy will add a terminal
        newline character to the the output stream only if the input
        stream is terminated with a newline.
      - Some nested structures formatted with the -lp indentation option may have
        some changes in indentation.  This is due to updates which were made to
        prevent formatting instability when line lengths are limited by the maximum line
        length. Most scripts will not be affected. If this causes unwanted formatting
        changes, try increasing the --maximum-line-length by a few characters.
      - Numerous minor fixes have been made. A complete list is at:
             https://github.com/perltidy/perltidy/blob/master/local-docs/BugLog.pod

-------------------------------------------------------------------
Fri Apr  2 03:08:21 UTC 2021 - Tina Müller <timueller+perl@suse.de>

- updated to 20210402
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2021 04 02
      - This release fixes several non-critical bugs which have been found since the last
      release.  An effort has been made to keep existing formatting unchanged.
      - Fixed issue git #57 regarding uninitialized warning flag.
      - Added experimental flag -lpxl=s requested in issue git #56 to provide some
      control over which containers get -lp indentation.
      - Fixed issue git #55 regarding lack of coordination of the --break-before-xxx
      flags and the --line-up-parens flag.
      - Fixed issue git #54 regarding irregular application of the --break-before-paren
      and similar --break-before-xxx flags, in which lists without commas were not
      being formatted according to these flags.
      - Fixed issue git #53. A flag was added to turn off alignment of spaced function
      parens.  If the --space-function-paren, -sfp flag is set, a side-effect is that the
      spaced function parens may get vertically aligned.  This can be undesirable,
      so a new parameter '--function-paren-vertical-alignment', or '-fpva', has been
      added to turn this vertical alignment off. The default is '-fpva', so that
      existing formatting is not changed.  Use '-nfpva' to turn off unwanted
      vertical alignment.  To illustrate the possibilities:
          # perltidy [default]
          myfun( $aaa, $b, $cc );
          mylongfun( $a, $b, $c );
          # perltidy -sfp
          myfun     ( $aaa, $b, $cc );
          mylongfun ( $a, $b, $c );
          # perltidy -sfp -nfpva
          myfun ( $aaa, $b, $cc );
          mylongfun ( $a, $b, $c );
      - Fixed issue git #51, a closing qw bare paren was not being outdented when
      the -nodelete-old-newlines flag was set.
      - Fixed numerous edge cases involving unusual parameter combinations which
        could cause alternating output states.  Most scripts will not be
        changed by these fixes.
      - A more complete list of updates is at
             https://github.com/perltidy/perltidy/blob/master/local-docs/BugLog.pod

-------------------------------------------------------------------
Mon Jan 11 03:10:01 UTC 2021 - Tina Müller <timueller+perl@suse.de>

- updated to 20210111
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2021 01 11
      - Fixed issue git #49, -se breaks warnings exit status behavior.
      The exit status flag was not always being set when the -se flag was set.
      - Some improvements have been made in the method for aligning side comments.
      One of the problems that was fixed is that there was a tendency for side comment
      placement to drift to the right in long scripts.  Programs with side comments
      may have a few changes.
      - Some improvements have been made in formatting qw quoted lists.  This
      fixes issue git #51, in which closing qw pattern delimiters not always
      following the settings specified by the --closing-token-indentation=n settings.
      Now qw closing delimiters ')', '}' and ']' follow these flags, and the
      delimiter '>' follows the flag for ')'.  Other qw pattern delimiters remain
      indented as the are now.  This change will cause some small formatting changes
      in some existing programs.
      - Another change involving qw lists is that they get full indentation,
      rather than just continuation indentation, if
           (1) the closing delimiter is one of } ) ] > and is on a separate line,
           (2) the opening delimiter  (i.e. 'qw{' ) is also on a separate line, and
           (3) the -xci flag (--extended-continuation-indentation) is set.
      This improves formatting when qw lists are contained in other lists. For example,
              # OLD: perltidy
              foreach $color (
                  qw(
                  AntiqueWhite3 Bisque1 Bisque2 Bisque3 Bisque4
                  SlateBlue3 RoyalBlue1 SteelBlue2 DeepSkyBlue3
                  ),
                  qw(
                  LightBlue1 DarkSlateGray1 Aquamarine2 DarkSeaGreen2
                  SeaGreen1 Yellow1 IndianRed1 IndianRed2 Tan1 Tan4
                  )
                )
              # NEW, perltidy -xci
              foreach $color (
                  qw(
                      AntiqueWhite3 Bisque1 Bisque2 Bisque3 Bisque4
                      SlateBlue3 RoyalBlue1 SteelBlue2 DeepSkyBlue3
                  ),
                  qw(
                      LightBlue1 DarkSlateGray1 Aquamarine2 DarkSeaGreen2
                      SeaGreen1 Yellow1 IndianRed1 IndianRed2 Tan1 Tan4
                  )
                )
      - Some minor improvements have been made to the rules for formatting
      some edge vertical alignment cases, usually involving two dissimilar lines.
      - A more complete list of updates is at
             https://github.com/perltidy/perltidy/blob/master/local-docs/BugLog.pod

-------------------------------------------------------------------
Mon Dec  7 03:08:36 UTC 2020 - Tina Müller <timueller+perl@suse.de>

- updated to 20201207
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

-------------------------------------------------------------------
Thu Dec  3 03:07:54 UTC 2020 - Tina Müller <timueller+perl@suse.de>

- updated to 20201202
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2020 12 02
      - This release is being made primarily to make available a several new formatting
        parameters, in particular -xci, -kbb=s, -kba=s, and -wnxl=s. No significant
        bugs have been found since the previous release, but numerous minor issues have
        been found and fixed as listed below.
      - This version is about 20% faster than the previous version due to optimizations
        made with the help of Devel::NYTProf.
      - Added flag -wnxl=s, --weld-nested-exclusion-list=s, to provide control which containers
        are welded with the --weld-nested-containers parameter.  This is related to issue git #45.
      - Merged pull request git #46 which fixes the docs regarding the -fse flag.
      - Fixed issue git #45, -vtc=n flag was ignored when -wn was set.
      - implement request RT #133649, delete-old-newlines selectively. Two parameters,
        -kbb=s or --keep-old-breakpoints-before=s, and
        -kba=s or --keep-old-breakpoints-after=s
        were added to request that old breakpoints be kept before or after
        selected token types.  For example, -kbb='=>' means that newlines before
        fat commas should be kept.
      - Fix git #44, fix exit status for assert-tidy/untidy.  The exit status was
        always 0 for --assert-tidy if the user had turned off all error messages with
        the -quiet flag.  This has been fixed.
      - Add flag -maxfs=n, --maximum-file-size-mb=n.  This parameter is provided to
        avoid causing system problems by accidentally attempting to format an
        extremely large data file. The default is n=10.  The command to increase
        the limit to 20 MB for example would be  -mfs=20.  This only applies to
        files specified by filename on the command line.
      - Skip formatting if there are too many indentation level errors.  This is
        controlled with -maxle=n, --maximum-level-errors=n.  This means that if
        the ending indentation differs from the starting indentation by more than
        n levels, the file will be output verbatim. The default is n=1.
        To skip this check, set n=-1 or set n to a large number.
      - A related new flag, --maximum-unexpected-errors=n, or -maxue=n, is available
        but is off by default.
      - Add flag -xci, --extended-continuation-indentation, regarding issue git #28
        This flag causes continuation indentation to "extend" deeper into structures.
        Since this is a fairly new flag, the default is -nxci to avoid disturbing
        existing formatting.  BUT you will probably see some improved formatting
        in complex data structures by setting this flag if you currently use -ci=n
        and -i=n with the same value of 'n' (as is the case if you use -pbp,
        --perl-best-practices, where n=4).
      - Fix issue git #42, clarify how --break-at-old-logical-breakpoints works.
        The man page was updated to note that it does not cause all logical breakpoints
        to be replicated in the output file.
      - Fix issue git #41, typo in manual regarding -fsb.
      - Fix issue git #40: when using the -bli option, a closing brace followed by
        a semicolon was not being indented.  This applies to braces which require
        semicolons, such as a 'do' block.
      - Added 'state' as a keyword.
      - A better test for convergence has been added. When iterations are requested,
        the new test will stop after the first pass if no changes in line break
        locations are made.  Previously, file checksums were used and required at least two
        passes to verify convergence unless no formatting changes were made.  With the new test,
        only a single pass is needed when formatting changes are limited to adjustments of
        indentation and whitespace on the lines of code.  Extensive testing has been made to
        verify the correctness of the new convergence test.
      - Line breaks are now automatically placed after 'use overload' to
        improve formatting when there are numerous overloaded operators.  For
        example
          use overload
            '+' => sub {
            ...
      - A number of minor problems with parsing signatures and prototypes have
        been corrected, particularly multi-line signatures. Some signatures
        had previously been parsed as if they were prototypes, which meant the
        normal spacing rules were not applied.  For example
        OLD:
          sub echo ($message= 'Hello World!' ) {
              ...;
          }
        NEW:
          sub echo ( $message = 'Hello World!' ) {
              ...;
          }
      - Numerous minor issues that the average user would not encounter were found
        and fixed. They can be seen in the more complete list of updates at
             https://github.com/perltidy/perltidy/blob/master/local-docs/BugLog.pod

-------------------------------------------------------------------
Tue Sep 29 03:11:28 UTC 2020 - Tina Müller <timueller+perl@suse.de>

- updated to 20201001
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2020 10 01
      - Robustness of perltidy has been significantly improved.  Updating is recommended. Continual
        automated testing runs began about 1 Sep 2020 and numerous issues have been found and fixed.
        Many involve references to uninitialized variables when perltidy is fed random text and random
        control parameters. A complete list is given in the file
             https://github.com/perltidy/perltidy/blob/master/local-docs/BugLog.pod
      - Added the token '->' to the list of alignment tokens, as suggested in git
        #39, so that it can be vertically aligned if a space is placed before them with -wls='->'.
      - Added parameters -bbhb=n (--break-before-hash-brace=n), -bbsb=n (--break-before-square-bracket=n),
        and -bbp=n (--break-before-paren=n) suggested in git #38.  These provide control over the
        opening container token of a multiple-line list.  Related new parameters -bbhbi=n, -bbsbi=n, -bbpi=n
        control indentation of these tokens.
      - Added keyword 'isa'.

-------------------------------------------------------------------
Mon Sep  7 03:17:23 UTC 2020 - Tina Müller <timueller+perl@suse.de>

- updated to 20200907
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2020 09 07
      - Fixed bug git #37, an error when the combination -scbb -csc was used.
        It occurs in perltidy versions 20200110, 20200619, and 20200822.  What happens is
        that when two consecutive lines with isolated closing braces had new side
        comments generated by the -csc parameter, a separating newline was missing.
        The resulting script will not then run, but worse, if it is reformatted with
        the same parameters then closing side comments could be overwritten and data
        lost.
        This problem was found during automated random testing.  The parameter
        -scbb is rarely used, which is probably why this has not been reported.  Please
        upgrade your version.
      - Added parameter --non-indenting-braces, or -nib, which prevents
        code from indenting one level if it follows an opening brace marked
        with a special side comment, '#<<<'.  For example,
                      { #<<<   a closure to contain lexical vars
                      my $var;  # this line does not indent
                      }
                      # this line cannot 'see' $var;
        This is on by default.  If your code happens to have some
        opening braces followed by '#<<<', and you
        don't want this, you can use -nnib to deactivate it.
      - Side comment locations reset at a line ending in a level 0 open
        block, such as when a new multi-line sub begins.  This is intended to
        help keep side comments from drifting to far to the right.

-------------------------------------------------------------------
Sun Aug 23 03:10:02 UTC 2020 - Tina Müller <timueller+perl@suse.de>

- updated to 20200822
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2020 08 22
      - Fix RT #133166, encoding not set for -st.  Also reported as RT #133171
        and git #35.
        This is a significant bug in version 20200616 which can corrupt data if
        perltidy is run as a filter on encoded text.
  **Please upgrade**
      - Fix issue RT #133161, perltidy -html was not working on pod
      - Fix issue git #33, allow control of space after '->'
      - Vertical alignment has been improved. Numerous minor issues have
        been fixed.
      - Formatting with the -lp option is improved.
      - Fixed issue git #32, misparse of bare 'ref' in ternary
      - When --assert-tidy is used and triggers an error, the first difference
        between input and output files is shown in the error output. This is
        a partial response to issue git #30.

-------------------------------------------------------------------
Sat Jun 20 03:10:23 UTC 2020 - Tina Müller <timueller+perl@suse.de>

- updated to 20200619
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2020 06 19
      - Added support for Switch::Plain syntax, issue git #31.
      - Fixed minor problem where trailing 'unless' clauses were not
        getting vertically aligned.
      - Added a parameter --logical-padding or -lop to allow logical padding
        to be turned off.  Requested by git #29. This flag is on by default.
        The man pages have examples.
      - Added a parameter -kpit=n to control spaces inside of parens following
        certain keywords, requested in git#26. This flag is off by default.
      - Added fix for git#25, improve vertical alignment for long lists with
        varying numbers of items per line.
      - calls to the module Perl::Tidy can now capture any output produced
        by a debug flag or one of the 'tee' flags through the new 'debugfile' and
        'teefile' call parameters.  These output streams are rarely used but
        they are now treated the same as any 'logfile' stream.
      - add option --break-at-old-semicolon-breakpoints', -bos, requested
        in RT#131644.  This flag will keep lines beginning with a semicolon.
      - Added --use-unicode-gcstring to control use of Unicode::GCString for
        evaluating character widths of encoded data.  The default is
        not to use this (--nouse-unicode-gcstring). If this flag is set,
        perltidy will look for Unicode::GCString and, if found, will use it
        to evaluate character display widths.  This can improve displayed
        vertical alignment for files with wide characters.  It is a nice
        feature but it is off by default to avoid conflicting formatting
        when there are multiple developers.  Perltidy installation does not
        require Unicode::GCString, so users wanting to use this feature need
        set this flag and also to install Unicode::GCString separately.
      - Added --character-encoding=guess or -guess to have perltidy guess
        if a file (or other input stream) is encoded as -utf8 or some
        other single-byte encoding. This is useful when processing a mixture
        of file types, such as utf8 and latin-1.
        Please Note: The default encoding has been set to be 'guess'
        instead of 'none'. This seems like the best default, since
        it allows perltidy work properly with both
        utf8 files and older latin-1 files.  The guess mode uses Encode::Guess,
        which is included in standard perl distributions, and only tries to
        guess if a file is utf8 or not, never any other encoding.  If the guess is
        utf8, and if the file successfully decodes as utf8, then it the encoding
        is assumed to be utf8.  Otherwise, no encoding is assumed.
        If you do not want to use this new default guess mode, or have a
        problem with it, you can set --character-encoding=none (the previous
        default) or --character-encoding=utf8 (if you deal with utf8 files).
      - Specific encodings of input files other than utf8 may now be given, for
        example --character-encoding=euc-jp.
      - Fix for git#22, Preserve function signature on a single line. An
        unwanted line break was being introduced when a closing signature paren
        followed a closing do brace.
      - Fix RT#132059, the -dac parameter was not working and caused an error exit
      - When -utf8 is used, any error output is encoded as utf8
      - Fix for git#19, adjust line break around an 'xor'
      - Fix for git#18, added warning for missing comma before unknown bare word.

-------------------------------------------------------------------
Fri Jan 10 03:11:33 UTC 2020 -  <timueller+perl@suse.de>

- updated to 20200110
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2020 01 10
  
      - This release adds a flag to control the feature RT#130394 (allow short nested blocks)
        introduced in the previous release.  Unfortunately that feature breaks 
        RPerl installations, so a control flag has been introduced and that feature is now
        off by default.  The flag is:
  
        --one-line-block-nesting=n, or -olbn=n, where n is an integer as follows: 
  
        -olbn=0 break nested one-line blocks into multiple lines [new DEFAULT]
        -olbn=1 stable; keep existing nested-one line blocks intact [previous DEFAULT]
  
        For example, consider this input line:
  
          foreach (@list) { if ($_ eq $asked_for) { last } ++$found }
  
        The new default behavior (-olbn=0), and behavior prior to version 20191203, is to break it into multiple lines:
  
          foreach (@list) {
              if ( $_ eq $asked_for ) { last }
              ++$found;
          }
  
        To keep nested one-line blocks such as this on a single line you can add the parameter -olbn=1.
  
      - Fixed issue RT#131288: parse error for un-prototyped constant function without parenthesized
        call parameters followed by ternary.
  
      - Fixed issue RT#131360, installation documentation.  Added a note that the binary 
        'perltidy' comes with the Perl::Tidy module. They can both normally be installed with 
        'cpanm Perl::Tidy'

-------------------------------------------------------------------
Wed Dec  4 03:11:52 UTC 2019 -  <timueller+perl@suse.de>

- updated to 20191203
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2019 12 03
  
      - Fixed issue RT#131115: -bli option not working correctly.
        Closing braces were not indented in some cases due to a glitch
        introduced in version 20181120.
  
      - Fixed issue RT#130394: Allow short nested blocks.  Given the following
  
          $factorial = sub { reduce { $a * $b } 1 .. 11 };
     
        Previous versions would always break the sub block because it
        contains another block (the reduce block).  The fix keeps
        short one-line blocks such as this intact.
  
      - Implement issue RT#130640: Allow different subroutine keywords.
        Added a flag --sub-alias-list=s or -sal=s, where s is a string with
        one or more aliases for 'sub', separated by spaces or commas.
        For example,
  
          perltidy -sal='method fun' 
  
        will cause the perltidy to treat the words 'method' and 'fun' to be
        treated the same as if they were 'sub'.
  
      - Added flag --space-prototype-paren=i, or -spp=i, to control spacing 
        before the opening paren of a prototype, where i=0, 1, or 2:
        i=0 no space
        i=1 follow input [current and default]
        i=2 always space
  
        Previously, perltidy always followed the input.
        For example, given the following input 
  
           sub usage();
  
        The result will be:
          sub usage();    # i=0 [no space]
          sub usage();    # i=1 [default; follows input]
          sub usage ();   # i=2 [space]
  
      - Fixed issue git#16, minor vertical alignment issue.
  
      - Fixed issue git#10, minor conflict of -wn and -ce
  
      - Improved some vertical alignments involving two lines.

-------------------------------------------------------------------
Mon Sep 16 12:22:01 UTC 2019 -  <timueller+perl@suse.de>

- updated to 20190915
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2019 09 15
  
      - fixed issue RT#130344: false warning "operator in print statement" 
        for "use lib". 
  
      - fixed issue RT#130304: standard error output should include filename.
        When perltidy error messages are directed to the standard error output 
        with -se or --standard-error-output, the message lines now have a prefix 
        'filename:' for clarification in case multiple files 
        are processed, where 'filename' is the name of the input file.  If 
        input is from the standard input the displayed filename is '<stdin>', 
        and if it is from a data structure then displayed filename 
        is '<source_stream>'.
  
      - implement issue RT#130425: check mode.  A new flag '--assert-tidy'
        will cause an error message if the output script is not identical to
        the input script. For completeness, the opposite flag '--assert-untidy'
        has also been added.  The next item, RT#130297, insures that the script
        will exit with a non-zero exit flag if the assertion fails.
  
      - fixed issue RT#130297; the perltidy script now exits with a nonzero exit 
        status if it wrote to the standard error output. Prevously only fatal
        run errors produced a non-zero exit flag. Now, even non-fatal messages
        requested with the -w flag will cause a non-zero exit flag.  The exit
        flag now has these values:
  
           0 = no errors
           1 = perltidy could not run to completion due to errors
           2 = perltidy ran to completion with error messages
  
      - added warning message for RT#130008, which warns of conflicting input
        parameters -iob and -bom or -boc.
  
      - fixed RT#129850; concerning a space between a closing block brace and
        opening bracket or brace, as occurs before the '[' in this line:
  
         my @addunix = map { File::Spec::Unix->catfile( @ROOT, @$_ ) } ['b'];
  
        Formerly, any space was removed. Now it is optional, and the output will
        follow the input.
  
      - fixed issue git#13, needless trailing whitespace in error message
  
      - fixed issue git#9: if the -ce (--cuddled-else) flag is used,
        do not try to form new one line blocks for a block type 
        specified with -cbl, particularly map, sort, grep
  
      - iteration speedup for unchanged code.  Previously, when iterations were
        requested, at least two formatting passes were made. Now just a single pass
        is made if the formatted code is identical to the input code.
  
      - some improved vertical alignments

-------------------------------------------------------------------
Sat Jun  1 05:18:42 UTC 2019 - Stephan Kulow <coolo@suse.com>

- updated to 20190601
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

  ## 2019 06 01
  
      - rt #128477: Prevent inconsistent owner/group and setuid/setgid bits. 
        In the -b (--backup-and-modify-in-place) mode, an attempt is made to set ownership
        of the output file equal to the input file, if they differ.
        In all cases, if the final output file ownership differs from input file, any setuid/setgid bits are cleared.
  
      - Added option -bom  (--break-at-old-method-breakpoints) by
        merrillymeredith which preserves breakpoints of method chains. Modified to also handle a cuddled call style.
  
      - Merged patch to fix Windows EOL translation error with UTF-8 written by
        Ron Ivy. This update prevents automatic conversion to 'DOS' CRLF line
        endings.  Also, Windows system testing at the appveyor site is working again.
  
      - RT #128280, added flag --one-line-block-semicolons=n (-olbs=n) 
        to control semicolons in one-line blocks.  The values of n are:
          n=0 means no semicolons termininating simple one-line blocks
          n=1 means stable; do not change from input file [DEFAULT and current]
          n=2 means always add semicolons in one-line blocks
        The current behavior corresponds to the default n=1.
  
      - RT #128216, Minor update to prevent inserting unwanted blank line at
        indentation level change.  This should not change existing scripts.
  
      - RT #81852: Improved indentation when quoted word (qw) lists are 
        nested within other containers using the --weld-nested (-wn) flag.
        The example given previously (below) is now closer to what it would
        be with a simple list instead of qw:
  
        # perltidy -wn
        use_all_ok( qw{
            PPI
            PPI::Tokenizer
            PPI::Lexer
            PPI::Dumper
            PPI::Find
            PPI::Normal
            PPI::Util
            PPI::Cache
        } );
  
      - RT#12764, introduced new feature allowing placement of blanks around
        sequences of selected keywords. This can be activated with the -kgb* 
        series of parameters described in the manual.
  
      - Rewrote vertical algnment module.  It is better at finding
        patterns in complex code. For example,
  
  	OLD:
             /^-std$/ && do { $std       = 1;     next; };
             /^--$/   && do { @link_args = @argv; last; };
             /^-I(.*)/ && do { $path = $1 || shift @argv; next; };
  
  	NEW:
             /^-std$/  && do { $std       = 1;                 next; };
             /^--$/    && do { @link_args = @argv;             last; };
             /^-I(.*)/ && do { $path      = $1 || shift @argv; next; };
  
      - Add repository URLs to META files 
  
      - RT #118553, "leave only one newline at end of file". This option was not 
        added because of undesirable side effects, but a new filter script
        was added which can do this, "examples/delete_ending_blank_lines.pl".

-------------------------------------------------------------------
Thu Dec  6 16:07:58 UTC 2018 - Stephan Kulow <coolo@suse.com>

- updated to 20181120
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES.md

-------------------------------------------------------------------
Wed Feb 21 06:50:42 UTC 2018 - coolo@suse.com

- updated to 20180220
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES

    2018 02 20
        - RT #124469, #124494, perltidy often making empty files.  The previous had
          an index error causing it to fail, particularly in version 5.18 of Perl.
  
          Please avoid version 20180219.

-------------------------------------------------------------------
Mon Feb 19 06:54:36 UTC 2018 - coolo@suse.com

- updated to 20180219
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES

    2018 02 19
        - RT #79947, cuddled-else generalization. A new flag -cb provides
          'cuddled-else' type formatting for an arbitrary type of block chain. The
          default is try-catch-finally, but this can be modified with the 
          parameter -cbl. 
  
        - Fixed RT #124298: add space after ! operator without breaking !! secret 
          operator
  
        - RT #123749: numerous minor improvements to the -wn flag were made.  
  
        - Fixed a problem with convergence tests in which iterations were stopping 
          prematurely. 
  
        - Here doc targets for <<~ type here-docs may now have leading whitespace.
  
        - Fixed RT #124354. The '-indent-only' flag was not working correctly in the 
          previous release. A bug in version 20180101 caused extra blank lines 
          to be output.
  
        - Issue RT #124114. Some improvements were made in vertical alignment
          involving 'fat commas'.

-------------------------------------------------------------------
Mon Jan  1 06:52:06 UTC 2018 - coolo@suse.com

- updated to 20180101
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES

    2018 01 01
        - Added new flag -wn (--weld-nested-containers) which addresses these issues:
          RT #123749: Problem with promises; 
          RT #119970: opening token stacking strange behavior;
          RT #81853: Can't stack block braces
  
          This option causes closely nested pairs of opening and closing containers
          to be "welded" together and essentially be formatted as a single unit,
          with just one level of indentation.
  
          Since this is a new flag it is set to be "off" by default but it has given 
          excellent results in testing. 
  
          EXAMPLE 1, multiple blocks, default formatting:
              do {
                  {
                      next if $x == $y;    # do something here
                  }
              } until $x++ > $z;
  
          perltidy -wn
              do { {
                  next if $x == $y;
              } } until $x++ > $z;
  
           EXAMPLE 2, three levels of wrapped function calls, default formatting:
                  p(
                      em(
                          conjug(
                              translate( param('verb') ), param('tense'),
                              param('person')
                          )
                      )
                  );
  
              # perltidy -wn
                  p( em( conjug(
                      translate( param('verb') ),
                      param('tense'), param('person')
                  ) ) );
  
              # EXAMPLE 3, chained method calls, default formatting:
              get('http://mojolicious.org')->then(
                  sub {
                      my $mojo = shift;
                      say $mojo->res->code;
                      return get('http://metacpan.org');
                  }
              )->then(
                  sub {
                      my $cpan = shift;
                      say $cpan->res->code;
                  }
              )->catch(
                  sub {
                      my $err = shift;
                      warn "Something went wrong: $err";
                  }
              )->wait;
  
              # perltidy -wn
              get('http://mojolicious.org')->then( sub {
                  my $mojo = shift;
                  say $mojo->res->code;
                  return get('http://metacpan.org');
              } )->then( sub {
                  my $cpan = shift;
                  say $cpan->res->code;
              } )->catch( sub {
                  my $err = shift;
                  warn "Something went wrong: $err";
              } )->wait;
  
  
        - Fixed RT #114359: Missparsing of "print $x ** 0.5;
  
        - Deactivated the --check-syntax flag for better security.  It will be
          ignored if set.  
  
        - Corrected minimum perl version from 5.004 to 5.008 based on perlver
          report.  The change is required for coding involving wide characters.
  
        - For certain severe errors, the source file will be copied directly to the
          output without formatting. These include ending in a quote, ending in a
          here doc, and encountering an unidentified character.

-------------------------------------------------------------------
Thu Dec 14 19:09:03 UTC 2017 - coolo@suse.com

- updated to 20171214
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES

    2017 12 14
        - RT #123749, partial fix.  "Continuation indentation" is removed from lines 
          with leading closing parens which are part of a call chain. 
          For example, the call to pack() is is now outdented to the starting 
          indentation in the following experession:  
  
              # OLD
              $mw->Button(
                  -text    => "New Document",
                  -command => \&new_document
                )->pack(
                  -side   => 'bottom',
                  -anchor => 'e'
                );
  
              # NEW
              $mw->Button(
                  -text    => "New Document",
                  -command => \&new_document
              )->pack(
                  -side   => 'bottom',
                  -anchor => 'e'
              );
  
          This modification improves readability of complex expressions, especially
          when the user uses the same value for continuation indentation (-ci=n) and 
          normal indentation (-i=n).  Perltidy was already programmed to
          do this but a minor bug was preventing it.
  
        - RT #123774, added flag to control space between a backslash and a single or
          double quote, requested by Robert Rothenberg.  The issue is that lines like
  
             $str1=\"string1";
             $str2=\'string2';
  
          confuse syntax highlighters unless a space is left between the backslash and
          the quote.
  
          The new flag to control this is -sbq=n (--space-backslash-quote=n), 
          where n=0 means no space, n=1 means follow existing code, n=2 means always
          space.  The default is n=1, meaning that a space will be retained if there
          is one in the source code.
  
        - Fixed RT #123492, support added for indented here doc operator <<~ added 
          in v5.26.  Thanks to Chris Weyl for the report.
  
        - Fixed docs; --closing-side-comment-list-string should have been just
          --closing-side-comment-list.  Thanks to F.Li.
  
        - Added patch RT #122030] Perl::Tidy sometimes does not call binmode.
          Thanks to Irilis Aelae.
  
        - Fixed RT #121959, PERLTIDY doesn't honor the 'three dot' notation for 
          locating a config file using environment variables.  Thanks to John 
          Wittkowski.
  
        - Minor improvements to formatting, in which some additional vertical
          aligmnemt is done. Thanks to Keith Neargarder.
  
        - RT #119588.  Vertical alignment is no longer done for // operator.

-------------------------------------------------------------------
Thu May 25 08:52:18 UTC 2017 - coolo@suse.com

- updated to 20170521
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES

    2017 05 21
        - Fixed debian #862667: failure to check for perltidy.ERR deletion can lead 
          to overwriting abritrary files by symlink attack. Perltidy was continuing 
          to write files after an unlink failure.  Thanks to Don Armstrong 
          for a patch.
  
        - Fixed RT #116344, perltidy fails on certain anonymous hash references:
          in the following code snippet the '?' was misparsed as a pattern 
          delimiter rather than a ternary operator.
              return ref {} ? 1 : 0;
  
        - Fixed RT #113792: misparsing of a fat comma (=>) right after 
          the __END__ or __DATA__ tokens.  These keywords were getting
          incorrectly quoted by the following => operator.
  
        - Fixed RT #118558. Custom Getopt::Long configuration breaks parsing 
          of perltidyrc.  Perltidy was resetting the users configuration too soon.
  
        - Fixed RT #119140, failure to parse double diamond operator.  Code to
          handle this new operator has been added.
  
        - Fixed RT #120968.  Fixed problem where -enc=utf8 didn't work 
          with --backup-and-modify-in-place. Thanks to Heinz Knutzen for this patch.
  
        - Fixed minor formatting issue where one-line blocks for subs with signatures 
          were unnecesarily broken
  
        - RT #32905, patch to fix utf-8 error when output was STDOUT. 
  
        - RT #79947, improved spacing of try/catch/finally blocks. Thanks to qsimpleq
          for a patch.
  
        - Fixed #114909, Anonymous subs with signatures and prototypes misparsed as
          broken ternaries, in which a statement such as this was not being parsed
          correctly:
              return sub ( $fh, $out ) : prototype(*$) { ... }
  
        - Implemented RT #113689, option to introduces spaces after an opening block
          brace and before a closing block brace. Four new optional controls are
          added. The first two define the minimum number of blank lines to be
          inserted 
  
           -blao=i or --blank-lines-after-opening-block=i
           -blbc=i or --blank-lines-before-closing-block=i
  
          where i is an integer, the number of lines (the default is 0).  
  
          The second two define the types of blocks to which the first two apply 
  
           -blaol=s or --blank-lines-after-opening-block-list=s
           -blbcl=s or --blank-lines-before-closing-block-list=s
      
          where s is a string of possible block keywords (default is just 'sub',
          meaning a named subroutine).
  
          For more information please see the documentation.
  
        - The method for specifying block types for certain input parameters has
          been generalized to distinguish between normal named subroutines and
          anonymous subs.  The keyword for normal subroutines remains 'sub', and
          the new keyword for anonymous subs is 'asub'. 
  
        - Minor documentation changes. The BUGS sections now have a link
          to CPAN where most open bugs and issues can be reviewed and bug reports
          can be submitted.  The information in the AUTHOR and CREDITS sections of
          the man pages have been removed from the man pages to streamline the
          documentation. This information is still in the source code.

-------------------------------------------------------------------
Tue Mar  8 10:48:54 UTC 2016 - coolo@suse.com

- updated to 20160302
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES

    2016 03 02
        - RT #112534. Corrected a minor problem in which an unwanted newline
          was placed before the closing brace of an anonymous sub with 
          a signature, if it was in a list.  Thanks to Dmytro Zagashev.
  
        - Corrected a minor problem in which occasional extra indentation was
          given to the closing brace of an anonymous sub in a list when the -lp 
          parameter was set.
  
    2016 03 01
        - RT #104427. Added support for signatures.
  
        - RT #111512.  Changed global warning flag $^W = 1 to use warnings;
          Thanks to Dmytro Zagashev.
  
        - RT #110297, added support for new regexp modifier /n
          Thanks to Dmytro Zagashev.
  
        - RT #111519.  The -io (--indent-only) and -dac (--delete-all-comments)
          can now both be used in one pass. Thanks to Dmitry Veltishev.
  
        - Patch to avoid error message with 'catch' used by TryCatch, as in
             catch($err){
                # do something
             }
          Thanks to Nick Tonkin.
  
        - RT #32905, UTF-8 coding is now more robust. Thanks to qsimpleq
          and Dmytro for patches.
  
        - RT #106885. Added string bitwise operators ^. &. |. ~. ^.= &.= |.=
   
        - Fixed RT #107832 and #106492, lack of vertical alignment of two lines
          when -boc flag (break at old commas) is set.  This bug was 
          inadvertantly introduced in previous bug fix RT #98902. 
  
        - Some common extensions to Perl syntax are handled better.
          In particular, the following snippet is now foratted cleanly:
  
            method deposit( Num $amount) {
                $self->balance( $self->balance + $amount );
            }
  
          A new flag -xs (--extended-syntax) was added to enable this, and the default
          is to use -xs. 
  
          In previous versions, and now only when -nxs is set, this snippet of code
          generates the following error message:
  
          "syntax error at ') {', didn't see one of: case elsif for foreach given if switch unless until when while"

-------------------------------------------------------------------
Sun Aug 23 09:13:37 UTC 2015 - coolo@suse.com

- updated to 20150815
   see /usr/share/doc/packages/perl-Perl-Tidy/CHANGES

    2015 08 15
        - Fixed RT# 105484, Invalid warning about 'else' in 'switch' statement.  The
          warning happened if a 'case' statement did not use parens.
  
        - Fixed RT# 101547, misparse of // caused error message.  Also..
  
        - Fixed RT# 102371, misparse of // caused unwated space in //=
  
        - Fixed RT# 100871, "silent failure of HTML Output on Windows". 
          Changed calls to tempfile() from:
            my ( $fh_tmp, $tmpfile ) = tempfile();
          to have the full path name:
            my ( $fh_tmp, $tmpfile ) = File::Temp::tempfile()
          because of problems in the Windows version reported by Dean Pearce.
  
        - Fixed RT# 99514, calling the perltidy module multiple times with 
          a .perltidyrc file containing the parameter --output-line-ending 
          caused a crash.  This was a glitch in the memoization logic. 
  
        - Fixed RT#99961, multiple lines inside a cast block caused unwanted
          continuation indentation.  
  
        - RT# 32905, broken handling of UTF-8 strings. 
          A new flag -utf8 causes perltidy assume UTF-8 encoding for input and 
          output of an io stream.  Thanks to Sebastian Podjasek for a patch.  
          This feature may not work correctly in older versions of Perl. 
          It worked in a linux version 5.10.1 but not in a Windows version 5.8.3 (but
          otherwise perltidy ran correctly).
  
        - Warning files now report perltidy VERSION. Suggested by John Karr.
   
        - Fixed long flag --nostack-closing-tokens (-nsct has always worked though). 
          This was due to a typo.  This also fixed --nostack-opening-tokens to 
          behave correctly.  Thanks to Rob Dixon.

-------------------------------------------------------------------
Mon Sep 15 15:44:35 UTC 2014 - coolo@suse.com

- updated to 20140711
       - Fixed RT #94902: abbreviation parsing in .perltidyrc files was not
         working for multi-line abbreviations.  Thanks to Eric Fung for 
         supplying a patch. 
   
       - Fixed RT #95708, misparsing of a hash when the first key was a perl
         keyword, causing a semicolon to be incorrectly added.
 
       - Fixed RT #94338 for-loop in a parenthesized block-map.  A code block within
         parentheses of a map, sort, or grep function was being mistokenized.  In 
         rare cases this could produce in an incorrect error message.  The fix will
         produce some minor formatting changes.  Thanks to Daniel Trizen 
         discovering and documenting this.
 
       - Fixed RT #94354, excess indentation for stacked tokens.  Thanks to 
         Colin Williams for supplying a patch.
 
       - Added support for experimental postfix dereferencing notation introduced in
         perl 5.20. RT #96021.
 
       - Updated documentation to clarify the behavior of the -io flag
         in response to RT #95709.  You can add -noll or -l=0 to prevent 
         long comments from being outdented when -io is used.
 
       - Added a check to prevent a problem reported in RT #81866, where large
         scripts which had been compressed to a single line could not be formatted
         because of a check for VERSION for MakeMaker. The workaround was to 
         use -nvpl, but this shouldn't be necessary now.
 
       - Fixed RT #96101; Closing brace of anonymous sub in a list was being
         indented.  For example, the closing brace of the anonymous sub below 
         will now be lined up with the word 'callback'.  This problem 
         occured if there was no comma after the closing brace of the anonymous sub.  
         This update may cause minor changes to formatting of code with lists 
         of anonymous subs, especially TK code.

-------------------------------------------------------------------
Fri Oct  4 09:11:17 UTC 2013 - coolo@suse.com

- updated to 20130922
    - Fixed RT #88020. --converge was not working with wide characters.
    - Fixed RT #78156. package NAMESPACE VERSION syntax not accepted.
    - First attempt to fix RT #88588.  INDEX END tag change in pod2html breaks 
      perltidy -html. I put in a patch which should work but I don't yet have
      a way of testing it.

-------------------------------------------------------------------
Tue Aug  6 17:49:08 UTC 2013 - coolo@suse.com

- updated to 20130806
      - Fixed RT #87107, spelling

      - Fixed RT #87502, incorrect of parsing of smartmatch before hash brace
  
      - Added feature request RT #87330, trim whitespace after POD.
        The flag -trp (--trim-pod) will trim trailing whitespace from lines of POD

-------------------------------------------------------------------
Sat Jul 27 11:58:42 UTC 2013 - coolo@suse.com

- updated to 20130717
      - Fixed RT #86929, #86930, missing lhs of assignment.
      - Fixed RT #84922, moved pod from Tidy.pm into Tidy.pod

-------------------------------------------------------------------
Sun Jun  9 14:59:59 UTC 2013 - coolo@suse.com

- updated to 20121207
    - The flag -cab=n or --comma-arrow-breakpoints=n has been generalized
      to give better control over breaking open short containers.  The
      possible values are now:

        n=0 break at all commas after =>  
        n=1 stable: break at all commas after => if container is open,
            EXCEPT FOR one-line containers
        n=2 break at all commas after =>, BUT try to form the maximum
            maximum one-line container lengths
        n=3 do not treat commas after => specially at all 
        n=4 break everything: like n=0 but also break a short container with
            a => not followed by a comma
        n=5 stable: like n=1 but ALSO break at open one-line containers (default)

      New values n=4 and n=5 have been added to allow short blocks to be
      broken open.  The new default is n=5, stable.  It should more closely
      follow the breaks in the input file, and previously formatted code
      should remain unchanged.  If this causes problems use -cab=1 to recover 
      the former behavior.  Thanks to Tony Maszeroski for the suggestion.

      To illustrate the need for the new options, if perltidy is given
      the following code, then the old default (-cab=1) was to close up 
      the 'index' container even if it was open in the source.  The new 
      default (-cab=5) will keep it open if it was open in the source.

       our $fancypkg = {
           'ALL' => {
               'index' => {
                   'key' => 'value',
               },
               'alpine' => {
                   'one'   => '+',
                   'two'   => '+',
                   'three' => '+',
               },
           }
       };

    - New debug flag --memoize (-mem).  This version contains a 
      patch supplied by Jonathan Swartz which can significantly speed up
      repeated calls to Perl::Tidy::perltidy in a single process by caching
      the result of parsing the formatting parameters.  A factor of up to 10
      speedup was achieved for masontidy (https://metacpan.org/module/masontidy).
      The memoization patch is on by default but can be deactivated for 
      testing with -nmem (or --no-memoize).

-------------------------------------------------------------------
Mon Dec 19 10:50:16 UTC 2011 - coolo@suse.de

- update to 20101217
   - added new flag -it=n or --iterations=n
   - A configuration file pathname begins with three dots, e.g.
     ".../.perltidyrc", indicates that the file should be searched for starting
     in the current directory and working upwards. 
   - Added flag --notidy which disables all formatting and causes the input to be
     copied unchanged. 
   - Added prefilters and postfilters in the call to the Tidy.pm module.
   - The starting indentation level of sections of code entabbed with -et=n
     is correctly guessed if it was also produced with the same -et=n flag.  This
     keeps the indentation stable on repeated formatting passes within an editor.
     Thanks to Sam Kington and Glenn.
   - Functions with prototype '&' had a space between the function and opening peren.
   - Patch to never put spaces around a bare word in braces beginning with ^ 

-------------------------------------------------------------------
Wed Dec  1 13:34:30 UTC 2010 - coolo@novell.com

- switch to perl_requires macro

-------------------------------------------------------------------
Wed Oct 13 23:11:58 UTC 2010 - chris@computersalat.de

- noarch pkg
- recreated by cpanspec 1.78

-------------------------------------------------------------------
Wed Jan 20 16:54:54 UTC 2010 - lars@linux-schulserver.de

- specfile cleanup

-------------------------------------------------------------------
Tue Jan 14 00:00:00 CET 2010 - cwh@suse.de

- initial version