diff --git a/0001-alsaloop-reduce-cumulative-error-caused-by-non-atomi.patch b/0001-alsaloop-reduce-cumulative-error-caused-by-non-atomi.patch deleted file mode 100644 index 54b04a3..0000000 --- a/0001-alsaloop-reduce-cumulative-error-caused-by-non-atomi.patch +++ /dev/null @@ -1,62 +0,0 @@ -From ec8717d58891b18e27ac3f0e220a2a7060512870 Mon Sep 17 00:00:00 2001 -From: Ruslan Bilovol -Date: Mon, 9 Mar 2020 22:29:54 +0200 -Subject: [PATCH] alsaloop: reduce cumulative error caused by non-atomic - samples calculation - -When doing loopback between two audio card with -same sampling frequency, I noticed slow increase -of pitch_diff. - -When I changed order of get_queued_playback_samples() -vs get_queued_capture_samples(), I noticed same drift -of pitch_diff but if was decreasing this time. - -This seems to be caused by non-atomic consecutive -snd_pcm_delay() invocation for playback then for -capture. snd_pcm_delay() measures delay between -read/write call and actual ADC/DAC operation. - -So while we get this value for playback path in -get_queued_playback_samples(), next call to -get_queued_capture_samples() will happen a little -bit later so snd_pcm_delay() may return incorrect -value. - -Be interleaving get_queued_{playback,capture}_samples() -order, we divide this small error between playback -and capture paths. I do not see any issues anymore -with one-way drift of pitch_diff. - -Signed-off-by: Ruslan Bilovol -Signed-off-by: Jaroslav Kysela ---- - alsaloop/pcmjob.c | 12 ++++++++++-- - 1 file changed, 10 insertions(+), 2 deletions(-) - -diff --git a/alsaloop/pcmjob.c b/alsaloop/pcmjob.c -index b252486b2f6d..1b7925a205be 100644 ---- a/alsaloop/pcmjob.c -+++ b/alsaloop/pcmjob.c -@@ -1951,8 +1951,16 @@ int pcmjob_pollfds_handle(struct loopback *loop, struct pollfd *fds) - } - if (loop->sync != SYNC_TYPE_NONE) { - snd_pcm_sframes_t pqueued, cqueued; -- pqueued = get_queued_playback_samples(loop); -- cqueued = get_queued_capture_samples(loop); -+ -+ /* Reduce cumulative error by interleaving playback vs capture reading order */ -+ if (loop->total_queued_count & 1) { -+ pqueued = get_queued_playback_samples(loop); -+ cqueued = get_queued_capture_samples(loop); -+ } else { -+ cqueued = get_queued_capture_samples(loop); -+ pqueued = get_queued_playback_samples(loop); -+ } -+ - if (verbose > 4) - snd_output_printf(loop->output, "%s: queued %li/%li samples\n", loop->id, pqueued, cqueued); - if (pqueued > 0) --- -2.16.4 - diff --git a/0002-alsactl-don-t-exit-on-EINTR-from-epoll_wait.patch b/0002-alsactl-don-t-exit-on-EINTR-from-epoll_wait.patch deleted file mode 100644 index a7ef2b5..0000000 --- a/0002-alsactl-don-t-exit-on-EINTR-from-epoll_wait.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 5830fc726ac9294641592a8c007502d573f6dea1 Mon Sep 17 00:00:00 2001 -From: Zev Weiss -Date: Mon, 14 Oct 2019 23:36:50 -0500 -Subject: [PATCH] alsactl: don't exit on EINTR from epoll_wait(). - -Previously, things like attaching strace to a running 'alsactl monitor' -process would cause it to exit. - -Signed-off-by: Zev Weiss -Reviewed-by: Takashi Sakamoto -Tested-by: Takashi Sakamoto -Signed-off-by: Jaroslav Kysela ---- - alsactl/monitor.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/alsactl/monitor.c b/alsactl/monitor.c -index 6b090e4f5c92..cf4167bee165 100644 ---- a/alsactl/monitor.c -+++ b/alsactl/monitor.c -@@ -342,6 +342,8 @@ static int run_dispatcher(int epfd, int sigfd, int infd, struct list_head *srcs, - - count = epoll_wait(epfd, epev, max_ev_count, 200); - if (count < 0) { -+ if (errno == EINTR) -+ continue; - err = count; - break; - } --- -2.16.4 - diff --git a/0003-alsactl-avoid-needless-wakeups-in-monitor-loop.patch b/0003-alsactl-avoid-needless-wakeups-in-monitor-loop.patch deleted file mode 100644 index d84b06a..0000000 --- a/0003-alsactl-avoid-needless-wakeups-in-monitor-loop.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 5fe6b866594c6d59d1960356590a00ccc4cdf4c7 Mon Sep 17 00:00:00 2001 -From: Zev Weiss -Date: Mon, 14 Oct 2019 23:38:02 -0500 -Subject: [PATCH] alsactl: avoid needless wakeups in monitor loop. - -The timeout wasn't really being used for anything; disabling it should -reduce idle energy consumption slightly. - -Signed-off-by: Zev Weiss -Reviewed-by: Takashi Sakamoto -Tested-by: Takashi Sakamoto -Signed-off-by: Jaroslav Kysela ---- - alsactl/monitor.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/alsactl/monitor.c b/alsactl/monitor.c -index cf4167bee165..fa6cd85d2ab2 100644 ---- a/alsactl/monitor.c -+++ b/alsactl/monitor.c -@@ -340,7 +340,7 @@ static int run_dispatcher(int epfd, int sigfd, int infd, struct list_head *srcs, - int count; - int i; - -- count = epoll_wait(epfd, epev, max_ev_count, 200); -+ count = epoll_wait(epfd, epev, max_ev_count, -1); - if (count < 0) { - if (errno == EINTR) - continue; --- -2.16.4 - diff --git a/0004-alsactl-fix-error-handling-for-sched_setscheduler-ca.patch b/0004-alsactl-fix-error-handling-for-sched_setscheduler-ca.patch deleted file mode 100644 index 90de6db..0000000 --- a/0004-alsactl-fix-error-handling-for-sched_setscheduler-ca.patch +++ /dev/null @@ -1,38 +0,0 @@ -From d2bf87608a1c3f2d62ceb9300a74e9006394c678 Mon Sep 17 00:00:00 2001 -From: Oscar65 -Date: Thu, 16 Apr 2020 12:35:21 +0200 -Subject: [PATCH] alsactl: fix error handling for sched_setscheduler() call -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -As man page says: "If successful, the sched_setparam() function shall return zero." - -Without update I got this output in the syslog (journalctl): -abr 16 09:25:30 mypc alsactl[1652]: alsactl 1.2.2 daemon started -abr 16 09:25:30 mypc alsactl[1652]: /usr/bin/alsactl: do_nice:165sched_setparam failed: No such file or directory - -If sched_setscheduler() returns 0, so it means that the call was successful. - -Signed-off-by: Oscar Megía -Signed-off-by: Jaroslav Kysela ---- - alsactl/alsactl.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/alsactl/alsactl.c b/alsactl/alsactl.c -index dfb1db7f4a83..60d39459dedf 100644 ---- a/alsactl/alsactl.c -+++ b/alsactl/alsactl.c -@@ -161,7 +161,7 @@ static void do_nice(int use_nice, int sched_idle) - if (sched_idle) { - if (sched_getparam(0, &sched_param) >= 0) { - sched_param.sched_priority = 0; -- if (!sched_setscheduler(0, SCHED_IDLE, &sched_param)) -+ if (sched_setscheduler(0, SCHED_IDLE, &sched_param) < 0) - error("sched_setparam failed: %s", strerror(errno)); - } else { - error("sched_getparam failed: %s", strerror(errno)); --- -2.16.4 - diff --git a/0005-alsa-info.sh-add-ALT-to-DISTRO-list.patch b/0005-alsa-info.sh-add-ALT-to-DISTRO-list.patch deleted file mode 100644 index 1093243..0000000 --- a/0005-alsa-info.sh-add-ALT-to-DISTRO-list.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 217fef4a0b4e2604d57c8b9cb21e67a82e9a17a3 Mon Sep 17 00:00:00 2001 -From: Michael Shigorin -Date: Fri, 1 May 2020 10:28:59 +0300 -Subject: [PATCH 5/7] alsa-info.sh: add ALT to DISTRO list - -Suggested-by: Anton Farygin -See-also: http://bugzilla.altlinux.org/38416 -Signed-off-by: Jaroslav Kysela ---- - alsa-info/alsa-info.sh | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/alsa-info/alsa-info.sh b/alsa-info/alsa-info.sh -index 7bae30a614b0..2265caec970e 100755 ---- a/alsa-info/alsa-info.sh -+++ b/alsa-info/alsa-info.sh -@@ -394,7 +394,7 @@ fi - - # Fetch the info and store in temp files/variables - TSTAMP=$(LANG=C TZ=UTC date) --DISTRO=$(grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus" /etc/{issue,*release,*version}) -+DISTRO=$(grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus\|ALT" /etc/{issue,*release,*version}) - KERNEL_VERSION=$(uname -r) - KERNEL_PROCESSOR=$(uname -p) - KERNEL_MACHINE=$(uname -m) --- -2.16.4 - diff --git a/0006-alsa-info-initial-rpm-deb-package-info.patch b/0006-alsa-info-initial-rpm-deb-package-info.patch deleted file mode 100644 index af28d86..0000000 --- a/0006-alsa-info-initial-rpm-deb-package-info.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 8e59029c9c70d00efb33eb1d0d79b30dbcabbcc8 Mon Sep 17 00:00:00 2001 -From: Michael Shigorin -Date: Fri, 1 May 2020 10:52:42 +0300 -Subject: [PATCH 6/7] alsa-info: initial rpm/deb package info - -This might become a Pandora's box given -the amount of obscure package managers -on the planet but these two account for -most *nix-like systems with ALSA it seems. - -Added support for querying ALSA packages -installed through rpm and dpkg; tested -on ALT (rpm) and OS Elbrus (dpkg). - -Suggested-by: Anton Farygin -See-also: http://bugzilla.altlinux.org/38416 -Signed-off-by: Jaroslav Kysela ---- - alsa-info/alsa-info.sh | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - -diff --git a/alsa-info/alsa-info.sh b/alsa-info/alsa-info.sh -index 2265caec970e..1bf0421e0db3 100755 ---- a/alsa-info/alsa-info.sh -+++ b/alsa-info/alsa-info.sh -@@ -238,6 +238,23 @@ withdmesg() { - echo "" >> $FILE - } - -+withpackages() { -+ local RPM="$(which rpmquery 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null)" -+ local DPKG="$(which dpkg 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null)" -+ [ -n "$RPM$DPKG" ] || return -+ local PATTERN='(alsa-(lib|oss|plugins|tools|(topology|ucm)-conf|utils)|libalsa|tinycompress)' -+ { -+ echo "!!Packages installed" -+ echo "!!--------------------" -+ echo "" -+ { -+ if [ -x "$RPM" ]; then "$RPM" -a; fi -+ if [ -x "$DPKG" ]; then "$DPKG" -l; fi -+ } | grep -E "$PATTERN" -+ echo "" -+ } >> "$FILE" -+} -+ - withall() { - withdevices - withconfigs -@@ -247,6 +264,7 @@ withall() { - withmodules - withsysfs - withdmesg -+ withpackages - WITHALL="no" - } - -@@ -357,6 +375,7 @@ information about your ALSA installation and sound related hardware. - aplay - amixer - alsactl -+ rpm, dpkg - /proc/asound/ - /sys/class/sound/ - ~/.asoundrc (etc.) -@@ -699,6 +718,10 @@ if [ -n "$1" ]; then - withconfigs - WITHALL="no" - ;; -+ --with-packages) -+ withpackages -+ WITHALL="no" -+ ;; - --stdout) - UPLOAD="no" - if [ -z "$WITHALL" ]; then -@@ -730,6 +753,7 @@ if [ -n "$1" ]; then - echo " /etc/asound.conf if they exist)" - echo " --with-devices (shows the device nodes in /dev/snd/)" - echo " --with-dmesg (shows the ALSA/HDA kernel messages)" -+ echo " --with-packages (includes known packages installed)" - echo "" - echo " --output FILE (specify the file to output for no-upload mode)" - echo " --update (check server for script updates)" --- -2.16.4 - diff --git a/0007-alsa-info.sh-increase-version-to-0.4.65.patch b/0007-alsa-info.sh-increase-version-to-0.4.65.patch deleted file mode 100644 index dfe6a1f..0000000 --- a/0007-alsa-info.sh-increase-version-to-0.4.65.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 2cfeffb6e80db3fa39054f74badac33f9539233a Mon Sep 17 00:00:00 2001 -From: Jaroslav Kysela -Date: Mon, 4 May 2020 10:05:41 +0200 -Subject: [PATCH 7/7] alsa-info.sh: increase version to 0.4.65 - -Signed-off-by: Jaroslav Kysela ---- - alsa-info/alsa-info.sh | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/alsa-info/alsa-info.sh b/alsa-info/alsa-info.sh -index 1bf0421e0db3..c1849159120c 100755 ---- a/alsa-info/alsa-info.sh -+++ b/alsa-info/alsa-info.sh -@@ -1,6 +1,6 @@ - #!/bin/bash - --SCRIPT_VERSION=0.4.64 -+SCRIPT_VERSION=0.4.65 - CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog" - - ################################################################################# --- -2.16.4 - diff --git a/alsa-utils-1.2.2.tar.bz2 b/alsa-utils-1.2.2.tar.bz2 deleted file mode 100644 index eaabb89..0000000 --- a/alsa-utils-1.2.2.tar.bz2 +++ /dev/null @@ -1,3 +0,0 @@ -version https://git-lfs.github.com/spec/v1 -oid sha256:44807bd578c5f6df6e91a11b8d37e546424a5a1ea8d8e659ee359fe01730e4f3 -size 1274821 diff --git a/alsa-utils-1.2.3.tar.bz2 b/alsa-utils-1.2.3.tar.bz2 new file mode 100644 index 0000000..6034a37 --- /dev/null +++ b/alsa-utils-1.2.3.tar.bz2 @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff19ae48c22938de7a491bdb39db74a2eee2546013f39bf1a86185e426f921aa +size 1277105 diff --git a/alsa-utils.changes b/alsa-utils.changes index afde4e8..f43d375 100644 --- a/alsa-utils.changes +++ b/alsa-utils.changes @@ -1,3 +1,18 @@ +------------------------------------------------------------------- +Tue Jun 9 11:21:59 CEST 2020 - tiwai@suse.de + +- Update to alsa-utils 1.2.3: + including previous fixes, see the detailed changes at: + https://www.alsa-project.org/wiki/Detailed_changes_v1.2.2_v1.2.3 +- Dropped obsoleted patches: + 0001-alsaloop-reduce-cumulative-error-caused-by-non-atomi.patch + 0002-alsactl-don-t-exit-on-EINTR-from-epoll_wait.patch + 0003-alsactl-avoid-needless-wakeups-in-monitor-loop.patch + 0004-alsactl-fix-error-handling-for-sched_setscheduler-ca.patch + 0005-alsa-info.sh-add-ALT-to-DISTRO-list.patch + 0006-alsa-info-initial-rpm-deb-package-info.patch + 0007-alsa-info.sh-increase-version-to-0.4.65.patch + ------------------------------------------------------------------- Wed May 6 12:19:02 CEST 2020 - tiwai@suse.de diff --git a/alsa-utils.spec b/alsa-utils.spec index d7e05c8..cf7b064 100644 --- a/alsa-utils.spec +++ b/alsa-utils.spec @@ -16,10 +16,10 @@ # -%define do_autoreconf 1 +%define do_autoreconf 0 %define _udevdir %(pkg-config --variable=udevdir udev) Name: alsa-utils -Version: 1.2.2 +Version: 1.2.3 Release: 0 Summary: Advanced Linux Sound Architecture Utilities License: GPL-2.0-or-later @@ -29,13 +29,6 @@ Source: ftp://ftp.alsa-project.org/pub/utils/alsa-utils-%{version}.tar.b Source1: 01beep.conf Source2: sound-extra.service Source5: load-sound-modules.sh -Patch1: 0001-alsaloop-reduce-cumulative-error-caused-by-non-atomi.patch -Patch2: 0002-alsactl-don-t-exit-on-EINTR-from-epoll_wait.patch -Patch3: 0003-alsactl-avoid-needless-wakeups-in-monitor-loop.patch -Patch4: 0004-alsactl-fix-error-handling-for-sched_setscheduler-ca.patch -Patch5: 0005-alsa-info.sh-add-ALT-to-DISTRO-list.patch -Patch6: 0006-alsa-info-initial-rpm-deb-package-info.patch -Patch7: 0007-alsa-info.sh-increase-version-to-0.4.65.patch Patch101: alsa-utils-configure-version-revert.patch BuildRequires: alsa-devel BuildRequires: alsa-topology-devel @@ -76,13 +69,6 @@ and test audio before and after PM state changes. %prep %setup -q -%patch1 -p1 -%patch2 -p1 -%patch3 -p1 -%patch4 -p1 -%patch5 -p1 -%patch6 -p1 -%patch7 -p1 %if 0%{?do_autoreconf} %patch101 -p1 # fix stupid automake's automatic action