- enable xtensa architecture (Tensilica lc6 and related)
- Fix SUSE typo in README package name
- Use -ffat-lto-objects in order to provide assembly for static libs
(boo#1141913).
- Add binutils-pr24486.patch: fix for PR24486 (boo#1133131 boo#1133232).
- Add rx-gas-padding-pr24464.patch: fix for PR24464.
- riscv-abi-check.patch: Don't check ABI flags if no code section
- Add binutils.keyring and verify signature.
- Add disk and RAM (for ppc, ppc64 and ppc64le) constraint with _constraints.
- Update to binutils 2.32:
* The binutils now support for the C-SKY processor series.
* The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions.
It also has a new -mx86-used-note=[yes|no] option to generate (or
not) x86 GNU property notes.
* The MIPS assembler now supports the Loongson EXTensions R2 (EXT2),
the Loongson EXTensions (EXT) instructions, the Loongson Content
Address Memory (CAM) ASE and the Loongson MultiMedia extensions
Instructions (MMI) ASE.
* The addr2line, c++filt, nm and objdump tools now have a default
limit on the maximum amount of recursion that is allowed whilst
demangling strings. This limit can be disabled if necessary.
OBS-URL: https://build.opensuse.org/request/show/727474
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=308
- Update to binutils 2.32:
* The binutils now support for the C-SKY processor series.
* The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions.
It also has a new -mx86-used-note=[yes|no] option to generate (or
not) x86 GNU property notes.
* The MIPS assembler now supports the Loongson EXTensions R2 (EXT2),
the Loongson EXTensions (EXT) instructions, the Loongson Content
Address Memory (CAM) ASE and the Loongson MultiMedia extensions
Instructions (MMI) ASE.
* The addr2line, c++filt, nm and objdump tools now have a default
limit on the maximum amount of recursion that is allowed whilst
demangling strings. This limit can be disabled if necessary.
* Objdump's --disassemble option can now take a parameter,
specifying the starting symbol for disassembly. Disassembly will
continue from this symbol up to the next symbol or the end of the
function.
* The BFD linker will now report property change in linker map file
when merging GNU properties.
* The BFD linker's -t option now doesn't report members within
archives, unless -t is given twice. This makes it more useful
when generating a list of files that should be packaged for a
linker bug report.
* The GOLD linker has improved warning messages for relocations that
refer to discarded sections.
- Remove binutils-2.31-branch.diff.gz, fix-pr23919-[123].diff,
gold-depend-on-opcodes.diff and s390-relro.diff.
- Refresh binutils-skip-rpaths.patch, s390-biarch.diff, cross-avr-size.patch
and binutils-revert-plt32-in-branches.diff.
- Update to binutils 2.32:
* The binutils now support for the C-SKY processor series.
* The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions.
It also has a new -mx86-used-note=[yes|no] option to generate (or
not) x86 GNU property notes.
* The MIPS assembler now supports the Loongson EXTensions R2 (EXT2),
the Loongson EXTensions (EXT) instructions, the Loongson Content
Address Memory (CAM) ASE and the Loongson MultiMedia extensions
Instructions (MMI) ASE.
* The addr2line, c++filt, nm and objdump tools now have a default
limit on the maximum amount of recursion that is allowed whilst
demangling strings. This limit can be disabled if necessary.
* Objdump's --disassemble option can now take a parameter,
specifying the starting symbol for disassembly. Disassembly will
continue from this symbol up to the next symbol or the end of the
function.
* The BFD linker will now report property change in linker map file
when merging GNU properties.
* The BFD linker's -t option now doesn't report members within
archives, unless -t is given twice. This makes it more useful
when generating a list of files that should be packaged for a
linker bug report.
* The GOLD linker has improved warning messages for relocations that
refer to discarded sections.
- Remove binutils-2.31-branch.diff.gz, fix-pr23919-[123].diff,
gold-depend-on-opcodes.diff and s390-relro.diff.
- Refresh binutils-skip-rpaths.patch, s390-biarch.diff, cross-avr-size.patch
and binutils-revert-plt32-in-branches.diff.
OBS-URL: https://build.opensuse.org/request/show/671129
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=294
the support for the X86_ISA_1_* notes. Adds
patch binutils-2.31-branch.diff.gz .
- Add binutils-revert-plt32-in-branches.diff on anything older
than Tumbleweed to not break old tools not expecting
PLT32 instead of PC32 relocs on x86_64.
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=284
* The AArch64 port now supports showing disassembly notes which are emitted
when inconsistencies are found with the instruction that may result in the
instruction being invalid. These can be turned on with the option -M notes
to objdump.
* The AArch64 port now emits warnings when a combination of an instruction and
a named register could be invalid.
* Added O modifier to ar to display member offsets inside an archive
* The ADR and ADRL pseudo-instructions supported by the ARM assembler
now only set the bottom bit of the address of thumb function symbols
if the -mthumb-interwork command line option is active.
* Add --generate-missing-build-notes=[yes|no] option to create (or not) GNU
Build Attribute notes if none are present in the input sources. Add a
--enable-generate-build-notes=[yes|no] configure time option to set the
default behaviour. Set the default if the configure option is not used
to "no".
* Remove -mold-gcc command-line option for x86 targets.
* Add -O[2|s] command-line options to x86 assembler to enable alternate
shorter instruction encoding.
* Add support for .nops directive. It is currently supported only for
x86 targets.
* Speed up direct linking with DLLs for Cygwin and Mingw targets.
* Add a configure option --enable-separate-code to decide whether
-z separate-code should be enabled in ELF linker by default. Default
to yes for Linux/x86 targets. Note that -z separate-code can increase
disk and memory size.
* Includes riscv-relax-size.patch, riscv-relax-relocatable.patch,
riscv-relax-versioned-hidden.patch and riscv-wrap-relax.patch
- Refresh enable-targets-gold.diff.
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=279
- Update to binutils 2.30
* Add --debug-dump=links option to readelf and --dwarf=links option to objdump
which displays the contents of any .gnu_debuglink or .gnu_debugaltlink
sections.
Add a --debug-dump=follow-links option to readelf and a --dwarf=follow-links
option to objdump which causes indirect links into separate debug info files
to be followed when dumping other DWARF sections.
* Add support for loaction views in DWARF debug line information.
* Add -z separate-code to generate separate code PT_LOAD segment.
* Add "-z undefs" command line option as the inverse of the "-z defs" option.
* Add -z globalaudit command line option to force audit libraries to be run
for every dynamic object loaded by an executable - provided that the loader
supports this functionality.
* Tighten linker script grammar around file name specifiers to prevent the use
of SORT_BY_ALIGNMENT and SORT_BY_INIT_PRIORITY on filenames. These would
previously be accepted but had no effect.
* The EXCLUDE_FILE directive can now be placed within any SORT_* directive
within input section lists.
- binutils-2.30-branch.diff: 2.30 branch @4cd0043413
- riscv-wrap-relax.patch: Fix linker relaxation with --wrap
- Remove use-hashtype-both-by-default.diff, use
--enable-default-hash-style=both instead
- Remove binutils-2.29-branch.diff, s390x-8fe09d7.diff
- Use riscv64-suse-linux as target for cross-riscv64-binutils
OBS-URL: https://build.opensuse.org/request/show/580272
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=265
* The MIPS port now supports microMIPS eXtended Physical Addressing (XPA)
instructions for assembly and disassembly.
* The MIPS port now supports the microMIPS Release 5 ISA for assembly and
disassembly.
* The MIPS port now supports the Imagination interAptiv MR2 processor,
which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple
of implementation-specific regular MIPS and MIPS16e2 ASE instructions.
* The SPARC port now supports the SPARC M8 processor, which implements the
Oracle SPARC Architecture 2017.
* The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly.
* Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
* Add support for the wasm32 ELF conversion of the WebAssembly file format.
* Add --inlines option to objdump, which extends the --line-numbers option
so that inlined functions will display their nesting information.
* Add --merge-notes options to objcopy to reduce the size of notes in
a binary file by merging and deleting redundant notes.
* Add support for locating separate debug info files using the build-id
method, where the separate file has a name based upon the build-id of
the original file.
GAS
* Add support for ELF SHF_GNU_MBIND.
* Add support for the WebAssembly file format and wasm32 ELF conversion.
* PowerPC gas now checks that the correct register class is used in
instructions. For instance, "addi %f4,%cr3,%r31" warns three times
that the registers are invalid.
* Add support for the Texas Instruments PRU processor.
* Support for the ARMv8-R architecture and Cortex-R52 processor has been
added to the ARM port.
GNU ld
OBS-URL: https://build.opensuse.org/package/show/devel:gcc/binutils?expand=0&rev=242
