2014-01-04 23:54:58 +01:00
|
|
|
---
|
- Update to 8.24:
** Bug fixes
* dd supports more robust SIGINFO/SIGUSR1 handling for outputting statistics.
Previously those signals may have inadvertently terminated the process.
* df --local no longer hangs with inaccessible remote mounts.
[bug introduced in coreutils-8.21]
* du now silently ignores all directory cycles due to bind mounts.
Previously it would issue a warning and exit with a failure status.
[bug introduced in coreutils-8.1 and partially fixed in coreutils-8.23]
* chroot again calls chroot(DIR) and chdir("/"), even if DIR is "/".
This handles separate bind mounted "/" trees, and environments
depending on the implicit chdir("/").
[bugs introduced in coreutils-8.23]
* cp no longer issues an incorrect warning about directory hardlinks when a
source directory is specified multiple times. Now, consistent with other
file types, a warning is issued for source directories with duplicate names,
or with -H the directory is copied again using the symlink name.
* factor avoids writing partial lines, thus supporting parallel operation.
[the bug dates back to the initial implementation]
* head, od, split, tac, tail, and wc no longer mishandle input from files in
/proc and /sys file systems that report somewhat-incorrect file sizes.
* mkdir --parents -Z now correctly sets the context for the last component,
even if the parent directory exists and has a different default context.
[bug introduced with the -Z restorecon functionality in coreutils-8.22]
* numfmt no longer outputs incorrect overflowed values seen with certain
large numbers, or with numbers with increased precision.
[bug introduced when numfmt was added in coreutils-8.21]
* numfmt now handles leading zeros correctly, not counting them when
settings processing limits, and making them optional with floating point.
[bug introduced when numfmt was added in coreutils-8.21]
* paste no longer truncates output for large input files. This would happen
for example with files larger than 4GiB on 32 bit systems with a '\n'
character at the 4GiB position.
[the bug dates back to the initial implementation]
* rm indicates the correct number of arguments in its confirmation prompt,
on all platforms. [bug introduced in coreutils-8.22]
* shuf -i with a single redundant operand, would crash instead of issuing
a diagnostic. [bug introduced in coreutils-8.22]
* tail releases inotify resources when unused. Previously it could exhaust
resources with many files, or with -F if files were replaced many times.
[bug introduced in coreutils-7.5]
* tail -f again follows changes to a file after it's renamed.
[bug introduced in coreutils-7.5]
* tail --follow no longer misses changes to files if those files were
replaced before inotify watches were created.
[bug introduced in coreutils-7.5]
* tail --follow consistently outputs all data for a truncated file.
[bug introduced in the beginning]
* tail --follow=name correctly outputs headers for multiple files
when those files are being created or renamed.
[bug introduced in coreutils-7.5]
** New features
* chroot accepts the new --skip-chdir option to not change the working directory
to "/" after changing into the chroot(2) jail, thus retaining the current wor-
king directory. The new option is only permitted if the new root directory is
the old "/", and therefore is useful with the --group and --userspec options.
* dd accepts a new status=progress level to print data transfer statistics
on stderr approximately every second.
* numfmt can now process multiple fields with field range specifications similar
to cut, and supports setting the output precision with the --format option.
* split accepts a new --separator option to select a record separator character
other than the default newline character.
* stty allows setting the "extproc" option where supported, which is
a useful setting with high latency links.
* sync no longer ignores arguments, and syncs each specified file, or with the
--file-system option, the file systems associated with each specified file.
* tee accepts a new --output-error option to control operation with pipes
and output errors in general.
** Changes in behavior
* df no longer suppresses separate exports of the same remote device, as
these are generally explicitly mounted. The --total option does still
suppress duplicate remote file systems.
[suppression was introduced in coreutils-8.21]
* mv no longer supports moving a file to a hardlink, instead issuing an error.
The implementation was susceptible to races in the presence of multiple mv
instances, which could result in both hardlinks being deleted. Also on case
insensitive file systems like HFS, mv would just remove a hardlinked 'file'
if called like `mv file File`. The feature was added in coreutils-5.0.1.
* numfmt --from-unit and --to-unit options now interpret suffixes as SI units,
and IEC (power of 2) units are now specified by appending 'i'.
* tee will exit early if there are no more writable outputs.
* tee does not treat the file operand '-' as meaning standard output any longer,
for better conformance to POSIX. This feature was added in coreutils-5.3.0.
* timeout --foreground no longer sends SIGCONT to the monitored process,
which was seen to cause intermittent issues with GDB for example.
** Improvements
* cp,install,mv will convert smaller runs of NULs in the input to holes,
and cp --sparse=always avoids speculative preallocation on XFS for example.
* cp will read sparse files more efficiently when the destination is a
non regular file. For example when copying a disk image to a device node.
* mv will try a reflink before falling back to a standard copy, which is
more efficient when moving files across BTRFS subvolume boundaries.
* stat and tail now know about IBRIX. stat -f --format=%T now reports the file
system type, and tail -f uses polling for files on IBRIX file systems.
* wc -l processes short lines much more efficiently.
* References from --help and the man pages of utilities have been corrected
in various cases, and more direct links to the corresponding online
documentation are provided.
- Patches adapted because of changed sources:
coreutils-disable_tests.patch
coreutils-i18n.patch
coreutils-misc.patch
coreutils-ocfs2_reflinks.patch
coreutils-remove_hostname_documentation.patch
coreutils-remove_kill_documentation.patch
coreutils-skip-gnulib-test-tls.patch
coreutils-tests-shorten-extreme-factor-tests.patch
sort-keycompare-mb.patch
- Patches removed because they're included in 8.24:
coreutils-chroot-perform-chdir-unless-skip-chdir.patch
coreutils-df-doc-df-a-includes-duplicate-file-systems.patch
coreutils-df-improve-mount-point-selection.patch
coreutils-df-show-all-remote-file-systems.patch
coreutils-df-total-suppress-separate-remotes.patch
coreutils-doc-adjust-reference-to-info-nodes-in-man-pages.patch
coreutils-fix_false_du_failure_on_newer_xfs.patch
coreutils-fix-man-deps.patch
coreutils-tests-aarch64-env.patch
coreutils-tests-make-inotify-rotate-more-robust-and-efficient.patch
coreutils-tests-rm-ext3-perf-increase-timeout.patch
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=262
2015-07-09 17:40:19 +02:00
|
|
|
doc/coreutils.texi | 42 +-----------------------------------------
|
|
|
|
|
1 file changed, 1 insertion(+), 41 deletions(-)
|
2014-01-04 23:54:58 +01:00
|
|
|
|
2010-07-19 14:13:47 +02:00
|
|
|
Index: doc/coreutils.texi
|
|
|
|
|
===================================================================
|
2016-01-30 08:32:56 +01:00
|
|
|
--- doc/coreutils.texi.orig
|
|
|
|
|
+++ doc/coreutils.texi
|
2023-03-21 22:00:25 +01:00
|
|
|
@@ -73,7 +73,6 @@
|
2010-07-19 14:13:47 +02:00
|
|
|
* groups: (coreutils)groups invocation. Print group names a user is in.
|
|
|
|
|
* head: (coreutils)head invocation. Output the first part of files.
|
2011-04-04 16:16:21 +02:00
|
|
|
* hostid: (coreutils)hostid invocation. Print numeric host identifier.
|
2010-07-19 14:13:47 +02:00
|
|
|
-* hostname: (coreutils)hostname invocation. Print or set system name.
|
|
|
|
|
* id: (coreutils)id invocation. Print user identity.
|
2014-08-01 18:10:23 +02:00
|
|
|
* install: (coreutils)install invocation. Copy files and set attributes.
|
2010-07-19 14:13:47 +02:00
|
|
|
* join: (coreutils)join invocation. Join lines on a common field.
|
Accepting request 1163997 from home:berny:branches:Base:System
- Update to 9.5:
Bug fixes:
* chmod -R now avoids a race where an attacker may replace a traversed file
with a symlink, causing chmod to operate on an unintended file.
[This bug was present in "the beginning".]
* cp, mv, and install no longer issue spurious diagnostics like "failed
to preserve ownership" when copying to GNU/Linux CIFS file systems.
They do this by working around some Linux CIFS bugs.
* cp --no-preserve=mode will correctly maintain set-group-ID bits
for created directories. Previously on systems that didn't support ACLs,
cp would have reset the set-group-ID bit on created directories.
[bug introduced in coreutils-8.20]
* join and uniq now support multi-byte characters better.
For example, 'join -tX' now works even if X is a multi-byte character,
and both programs now treat multi-byte characters like U+3000
IDEOGRAPHIC SPACE as blanks if the current locale treats them so.
* numfmt options like --suffix no longer have an arbitrary 127-byte limit.
[bug introduced with numfmt in coreutils-8.21]
* mktemp with --suffix now better diagnoses templates with too few X's.
Previously it conflated the insignificant --suffix in the error.
[bug introduced in coreutils-8.1]
* sort again handles thousands grouping characters in single-byte locales
where the grouping character is greater than CHAR_MAX. For e.g. signed
character platforms with a 0xA0 (aka  ) grouping character.
[bug introduced in coreutils-9.1]
* split --line-bytes with a mixture of very long and short lines
no longer overwrites the heap (CVE-2024-0684).
[bug introduced in coreutils-9.2]
* tail no longer mishandles input from files in /proc and /sys file systems,
on systems with a page size larger than the stdio BUFSIZ.
[This bug was present in "the beginning".]
* timeout avoids a narrow race condition, where it might kill arbitrary
processes after a failed process fork.
[bug introduced with timeout in coreutils-7.0]
* timeout avoids a narrow race condition, where it might fail to
kill monitored processes immediately after forking them.
[bug introduced with timeout in coreutils-7.0]
* wc no longer fails to count unprintable characters as parts of words.
[bug introduced in textutils-2.1]
Changes in behavior:
* base32 and base64 no longer require padding when decoding.
Previously an error was given for non padded encoded data.
* base32 and base64 have improved detection of corrupted encodings.
Previously encodings with non zero padding bits were accepted.
* basenc --base16 -d now supports lower case hexadecimal characters.
Previously an error was given for lower case hex digits.
* cp --no-clobber, and mv -n no longer exit with failure status if
existing files are encountered in the destination. Instead they revert
to the behavior from before v9.2, silently skipping existing files.
* ls --dired now implies long format output without hyperlinks enabled,
and will take precedence over previously specified formats or hyperlink
mode.
* numfmt will accept lowercase 'k' to indicate Kilo or Kibi units on input,
and uses lowercase 'k' when outputting such units in '--to=si' mode.
* pinky no longer tries to canonicalize the user's login location by default,
rather requiring the new --lookup option to enable this often slow feature.
* wc no longer ignores encoding errors when counting words.
Instead, it treats them as non white space.
New features:
* chgrp now accepts the --from=OWNER:GROUP option to restrict changes to files
with matching current OWNER and/or GROUP, as already supported by chown(1).
* chmod adds support for -h, -H,-L,-P, and --dereference options, providing
more control over symlink handling. This supports more secure handling of
CLI arguments, and is more consistent with chown, and chmod on other
systems.
* cp now accepts the --keep-directory-symlink option (like tar), to preserve
and follow existing symlinks to directories in the destination.
* cp and mv now accept the --update=none-fail option, which is similar
to the --no-clobber option, except that existing files are diagnosed,
and the command exits with failure status if existing files.
The -n,--no-clobber option is best avoided due to platform differences.
* env now accepts the -a,--argv0 option to override the zeroth argument
of the command being executed.
* mv now accepts an --exchange option, which causes the source and
destination to be exchanged. It should be combined with
--no-target-directory (-T) if the destination is a directory.
The exchange is atomic if source and destination are on a single
file system that supports atomic exchange; --exchange is not yet
supported in other situations.
* od now supports printing IEEE half precision floating point with -t fH,
or brain 16 bit floating point with -t fB, where supported by the compiler.
* tail now supports following multiple processes, with repeated --pid options.
Improvements:
* cp,mv,install,cat,split now read and write a minimum of 256KiB at a time.
This was previously 128KiB and increasing to 256KiB was seen to increase
throughput by 10-20% when reading cached files on modern systems.
* env,kill,timeout now support unnamed signals. kill(1) for example now
supports sending such signals, and env(1) will list them appropriately.
* SELinux operations in file copy operations are now more efficient,
avoiding unneeded MCS/MLS label translation.
* sort no longer dynamically links to libcrypto unless -R is used.
This decreases startup overhead in the typical case.
* wc is now much faster in single-byte locales and somewhat faster in
multi-byte locales.
- coreutils-9.4.split-CVE-2024-0684.patch: Remove now-upstream patch.
- gnulib-readutmp-under-gdm.patch: Likewise.
- gnulib-readutmp.patch: Likewise.
- coreutils-i18n.patch: Remove multi-byte patches for join and uniq, as the
upstream version now handles those tests.
Pull in gnulib module mbchar manually, as it is a dependency of mbfile,
but dropped out of the upstream dependency chain.
- coreutils-misc.patch: Remove change for gnulib-tests/test-isnanl.h.
- coreutils-fix-gnulib-time_r-tests.patch: Add upstream gnulib patch to skip
French test if TZ='Europe/Paris' does not work.
OBS-URL: https://build.opensuse.org/request/show/1163997
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=362
2024-04-02 17:30:19 +02:00
|
|
|
@@ -206,7 +205,7 @@ Free Documentation License''.
|
- Update to 8.15:
** New programs
realpath: print resolved file names.
** Bug fixes
du --one-file-system (-x) would ignore any non-directory specified on
the command line. For example, "touch f; du -x f" would print nothing.
[bug introduced in coreutils-8.14]
du -x no longer counts root directories of other file systems.
[bug introduced in coreutils-5.1.0]
ls --color many-entry-directory was uninterruptible for too long
[bug introduced in coreutils-5.2.1]
ls's -k option no longer affects how ls -l outputs file sizes.
It now affects only the per-directory block counts written by -l,
and the sizes written by -s. This is for compatibility with BSD
and with POSIX 2008. Because -k is no longer equivalent to
--block-size=1KiB, a new long option --kibibyte stands for -k.
[bug introduced in coreutils-4.5.4]
ls -l would leak a little memory (security context string) for each
nonempty directory listed on the command line, when using SELinux.
[bug probably introduced in coreutils-6.10 with SELinux support]
split -n 1/2 FILE no longer fails when operating on a growing file, or
(on some systems) when operating on a non-regular file like /dev/zero.
It would report "/dev/zero: No such file or directory" even though
the file obviously exists. Same for -n l/2.
[bug introduced in coreutils-8.8, with the addition of the -n option]
stat -f now recognizes the FhGFS and PipeFS file system types.
tac no longer fails to handle two or more non-seekable inputs
[bug introduced in coreutils-5.3.0]
tail -f no longer tries to use inotify on GPFS or FhGFS file systems
[you might say this was introduced in coreutils-7.5, along with inotify
support, but the new magic numbers weren't in the usual places then.]
** Changes in behavior
df avoids long UUID-including file system names in the default listing.
With recent enough kernel/tools, these long names would be used, pushing
second and subsequent columns far to the right. Now, when a long name
refers to a symlink, and no file systems are specified, df prints the
usually-short referent instead.
tail -f now uses polling (not inotify) when any of its file arguments
resides on a file system of unknown type. In addition, for each such
argument, tail -f prints a warning with the FS type magic number and a
request to report it to the bug-reporting address.
- Bring german message catalog up to date.
- Include upstream fix for du.
- Include upstream patch fixing basename documentation.
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=144
2012-03-09 19:02:35 +01:00
|
|
|
* File name manipulation:: dirname basename pathchk mktemp realpath
|
2010-07-19 14:13:47 +02:00
|
|
|
* Working context:: pwd stty printenv tty
|
|
|
|
|
* User information:: id logname whoami groups users who
|
|
|
|
|
-* System context:: date arch nproc uname hostname hostid uptime
|
2011-04-04 16:16:21 +02:00
|
|
|
+* System context:: date arch nproc uname hostid uptime
|
2010-07-19 14:13:47 +02:00
|
|
|
* SELinux context:: chcon runcon
|
2013-04-08 14:07:25 +02:00
|
|
|
* Modified command invocation:: chroot env nice nohup stdbuf timeout
|
2010-07-19 14:13:47 +02:00
|
|
|
* Process control:: kill
|
Accepting request 1163997 from home:berny:branches:Base:System
- Update to 9.5:
Bug fixes:
* chmod -R now avoids a race where an attacker may replace a traversed file
with a symlink, causing chmod to operate on an unintended file.
[This bug was present in "the beginning".]
* cp, mv, and install no longer issue spurious diagnostics like "failed
to preserve ownership" when copying to GNU/Linux CIFS file systems.
They do this by working around some Linux CIFS bugs.
* cp --no-preserve=mode will correctly maintain set-group-ID bits
for created directories. Previously on systems that didn't support ACLs,
cp would have reset the set-group-ID bit on created directories.
[bug introduced in coreutils-8.20]
* join and uniq now support multi-byte characters better.
For example, 'join -tX' now works even if X is a multi-byte character,
and both programs now treat multi-byte characters like U+3000
IDEOGRAPHIC SPACE as blanks if the current locale treats them so.
* numfmt options like --suffix no longer have an arbitrary 127-byte limit.
[bug introduced with numfmt in coreutils-8.21]
* mktemp with --suffix now better diagnoses templates with too few X's.
Previously it conflated the insignificant --suffix in the error.
[bug introduced in coreutils-8.1]
* sort again handles thousands grouping characters in single-byte locales
where the grouping character is greater than CHAR_MAX. For e.g. signed
character platforms with a 0xA0 (aka  ) grouping character.
[bug introduced in coreutils-9.1]
* split --line-bytes with a mixture of very long and short lines
no longer overwrites the heap (CVE-2024-0684).
[bug introduced in coreutils-9.2]
* tail no longer mishandles input from files in /proc and /sys file systems,
on systems with a page size larger than the stdio BUFSIZ.
[This bug was present in "the beginning".]
* timeout avoids a narrow race condition, where it might kill arbitrary
processes after a failed process fork.
[bug introduced with timeout in coreutils-7.0]
* timeout avoids a narrow race condition, where it might fail to
kill monitored processes immediately after forking them.
[bug introduced with timeout in coreutils-7.0]
* wc no longer fails to count unprintable characters as parts of words.
[bug introduced in textutils-2.1]
Changes in behavior:
* base32 and base64 no longer require padding when decoding.
Previously an error was given for non padded encoded data.
* base32 and base64 have improved detection of corrupted encodings.
Previously encodings with non zero padding bits were accepted.
* basenc --base16 -d now supports lower case hexadecimal characters.
Previously an error was given for lower case hex digits.
* cp --no-clobber, and mv -n no longer exit with failure status if
existing files are encountered in the destination. Instead they revert
to the behavior from before v9.2, silently skipping existing files.
* ls --dired now implies long format output without hyperlinks enabled,
and will take precedence over previously specified formats or hyperlink
mode.
* numfmt will accept lowercase 'k' to indicate Kilo or Kibi units on input,
and uses lowercase 'k' when outputting such units in '--to=si' mode.
* pinky no longer tries to canonicalize the user's login location by default,
rather requiring the new --lookup option to enable this often slow feature.
* wc no longer ignores encoding errors when counting words.
Instead, it treats them as non white space.
New features:
* chgrp now accepts the --from=OWNER:GROUP option to restrict changes to files
with matching current OWNER and/or GROUP, as already supported by chown(1).
* chmod adds support for -h, -H,-L,-P, and --dereference options, providing
more control over symlink handling. This supports more secure handling of
CLI arguments, and is more consistent with chown, and chmod on other
systems.
* cp now accepts the --keep-directory-symlink option (like tar), to preserve
and follow existing symlinks to directories in the destination.
* cp and mv now accept the --update=none-fail option, which is similar
to the --no-clobber option, except that existing files are diagnosed,
and the command exits with failure status if existing files.
The -n,--no-clobber option is best avoided due to platform differences.
* env now accepts the -a,--argv0 option to override the zeroth argument
of the command being executed.
* mv now accepts an --exchange option, which causes the source and
destination to be exchanged. It should be combined with
--no-target-directory (-T) if the destination is a directory.
The exchange is atomic if source and destination are on a single
file system that supports atomic exchange; --exchange is not yet
supported in other situations.
* od now supports printing IEEE half precision floating point with -t fH,
or brain 16 bit floating point with -t fB, where supported by the compiler.
* tail now supports following multiple processes, with repeated --pid options.
Improvements:
* cp,mv,install,cat,split now read and write a minimum of 256KiB at a time.
This was previously 128KiB and increasing to 256KiB was seen to increase
throughput by 10-20% when reading cached files on modern systems.
* env,kill,timeout now support unnamed signals. kill(1) for example now
supports sending such signals, and env(1) will list them appropriately.
* SELinux operations in file copy operations are now more efficient,
avoiding unneeded MCS/MLS label translation.
* sort no longer dynamically links to libcrypto unless -R is used.
This decreases startup overhead in the typical case.
* wc is now much faster in single-byte locales and somewhat faster in
multi-byte locales.
- coreutils-9.4.split-CVE-2024-0684.patch: Remove now-upstream patch.
- gnulib-readutmp-under-gdm.patch: Likewise.
- gnulib-readutmp.patch: Likewise.
- coreutils-i18n.patch: Remove multi-byte patches for join and uniq, as the
upstream version now handles those tests.
Pull in gnulib module mbchar manually, as it is a dependency of mbfile,
but dropped out of the upstream dependency chain.
- coreutils-misc.patch: Remove change for gnulib-tests/test-isnanl.h.
- coreutils-fix-gnulib-time_r-tests.patch: Add upstream gnulib patch to skip
French test if TZ='Europe/Paris' does not work.
OBS-URL: https://build.opensuse.org/request/show/1163997
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=362
2024-04-02 17:30:19 +02:00
|
|
|
@@ -430,7 +429,6 @@ System context
|
2010-07-19 14:13:47 +02:00
|
|
|
* date invocation:: Print or set system date and time
|
|
|
|
|
* nproc invocation:: Print the number of processors
|
|
|
|
|
* uname invocation:: Print system information
|
|
|
|
|
-* hostname invocation:: Print or set system name
|
2011-04-04 16:16:21 +02:00
|
|
|
* hostid invocation:: Print numeric host identifier
|
2010-07-19 14:13:47 +02:00
|
|
|
* uptime invocation:: Print system uptime and load
|
|
|
|
|
|
Accepting request 1163997 from home:berny:branches:Base:System
- Update to 9.5:
Bug fixes:
* chmod -R now avoids a race where an attacker may replace a traversed file
with a symlink, causing chmod to operate on an unintended file.
[This bug was present in "the beginning".]
* cp, mv, and install no longer issue spurious diagnostics like "failed
to preserve ownership" when copying to GNU/Linux CIFS file systems.
They do this by working around some Linux CIFS bugs.
* cp --no-preserve=mode will correctly maintain set-group-ID bits
for created directories. Previously on systems that didn't support ACLs,
cp would have reset the set-group-ID bit on created directories.
[bug introduced in coreutils-8.20]
* join and uniq now support multi-byte characters better.
For example, 'join -tX' now works even if X is a multi-byte character,
and both programs now treat multi-byte characters like U+3000
IDEOGRAPHIC SPACE as blanks if the current locale treats them so.
* numfmt options like --suffix no longer have an arbitrary 127-byte limit.
[bug introduced with numfmt in coreutils-8.21]
* mktemp with --suffix now better diagnoses templates with too few X's.
Previously it conflated the insignificant --suffix in the error.
[bug introduced in coreutils-8.1]
* sort again handles thousands grouping characters in single-byte locales
where the grouping character is greater than CHAR_MAX. For e.g. signed
character platforms with a 0xA0 (aka  ) grouping character.
[bug introduced in coreutils-9.1]
* split --line-bytes with a mixture of very long and short lines
no longer overwrites the heap (CVE-2024-0684).
[bug introduced in coreutils-9.2]
* tail no longer mishandles input from files in /proc and /sys file systems,
on systems with a page size larger than the stdio BUFSIZ.
[This bug was present in "the beginning".]
* timeout avoids a narrow race condition, where it might kill arbitrary
processes after a failed process fork.
[bug introduced with timeout in coreutils-7.0]
* timeout avoids a narrow race condition, where it might fail to
kill monitored processes immediately after forking them.
[bug introduced with timeout in coreutils-7.0]
* wc no longer fails to count unprintable characters as parts of words.
[bug introduced in textutils-2.1]
Changes in behavior:
* base32 and base64 no longer require padding when decoding.
Previously an error was given for non padded encoded data.
* base32 and base64 have improved detection of corrupted encodings.
Previously encodings with non zero padding bits were accepted.
* basenc --base16 -d now supports lower case hexadecimal characters.
Previously an error was given for lower case hex digits.
* cp --no-clobber, and mv -n no longer exit with failure status if
existing files are encountered in the destination. Instead they revert
to the behavior from before v9.2, silently skipping existing files.
* ls --dired now implies long format output without hyperlinks enabled,
and will take precedence over previously specified formats or hyperlink
mode.
* numfmt will accept lowercase 'k' to indicate Kilo or Kibi units on input,
and uses lowercase 'k' when outputting such units in '--to=si' mode.
* pinky no longer tries to canonicalize the user's login location by default,
rather requiring the new --lookup option to enable this often slow feature.
* wc no longer ignores encoding errors when counting words.
Instead, it treats them as non white space.
New features:
* chgrp now accepts the --from=OWNER:GROUP option to restrict changes to files
with matching current OWNER and/or GROUP, as already supported by chown(1).
* chmod adds support for -h, -H,-L,-P, and --dereference options, providing
more control over symlink handling. This supports more secure handling of
CLI arguments, and is more consistent with chown, and chmod on other
systems.
* cp now accepts the --keep-directory-symlink option (like tar), to preserve
and follow existing symlinks to directories in the destination.
* cp and mv now accept the --update=none-fail option, which is similar
to the --no-clobber option, except that existing files are diagnosed,
and the command exits with failure status if existing files.
The -n,--no-clobber option is best avoided due to platform differences.
* env now accepts the -a,--argv0 option to override the zeroth argument
of the command being executed.
* mv now accepts an --exchange option, which causes the source and
destination to be exchanged. It should be combined with
--no-target-directory (-T) if the destination is a directory.
The exchange is atomic if source and destination are on a single
file system that supports atomic exchange; --exchange is not yet
supported in other situations.
* od now supports printing IEEE half precision floating point with -t fH,
or brain 16 bit floating point with -t fB, where supported by the compiler.
* tail now supports following multiple processes, with repeated --pid options.
Improvements:
* cp,mv,install,cat,split now read and write a minimum of 256KiB at a time.
This was previously 128KiB and increasing to 256KiB was seen to increase
throughput by 10-20% when reading cached files on modern systems.
* env,kill,timeout now support unnamed signals. kill(1) for example now
supports sending such signals, and env(1) will list them appropriately.
* SELinux operations in file copy operations are now more efficient,
avoiding unneeded MCS/MLS label translation.
* sort no longer dynamically links to libcrypto unless -R is used.
This decreases startup overhead in the typical case.
* wc is now much faster in single-byte locales and somewhat faster in
multi-byte locales.
- coreutils-9.4.split-CVE-2024-0684.patch: Remove now-upstream patch.
- gnulib-readutmp-under-gdm.patch: Likewise.
- gnulib-readutmp.patch: Likewise.
- coreutils-i18n.patch: Remove multi-byte patches for join and uniq, as the
upstream version now handles those tests.
Pull in gnulib module mbchar manually, as it is a dependency of mbfile,
but dropped out of the upstream dependency chain.
- coreutils-misc.patch: Remove change for gnulib-tests/test-isnanl.h.
- coreutils-fix-gnulib-time_r-tests.patch: Add upstream gnulib patch to skip
French test if TZ='Europe/Paris' does not work.
OBS-URL: https://build.opensuse.org/request/show/1163997
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=362
2024-04-02 17:30:19 +02:00
|
|
|
@@ -16421,7 +16419,6 @@ information.
|
2010-07-19 14:13:47 +02:00
|
|
|
* arch invocation:: Print machine hardware name.
|
|
|
|
|
* nproc invocation:: Print the number of processors.
|
|
|
|
|
* uname invocation:: Print system information.
|
|
|
|
|
-* hostname invocation:: Print or set system name.
|
2011-04-04 16:16:21 +02:00
|
|
|
* hostid invocation:: Print numeric host identifier.
|
2010-07-19 14:13:47 +02:00
|
|
|
* uptime invocation:: Print system uptime and load.
|
|
|
|
|
@end menu
|
Accepting request 1163997 from home:berny:branches:Base:System
- Update to 9.5:
Bug fixes:
* chmod -R now avoids a race where an attacker may replace a traversed file
with a symlink, causing chmod to operate on an unintended file.
[This bug was present in "the beginning".]
* cp, mv, and install no longer issue spurious diagnostics like "failed
to preserve ownership" when copying to GNU/Linux CIFS file systems.
They do this by working around some Linux CIFS bugs.
* cp --no-preserve=mode will correctly maintain set-group-ID bits
for created directories. Previously on systems that didn't support ACLs,
cp would have reset the set-group-ID bit on created directories.
[bug introduced in coreutils-8.20]
* join and uniq now support multi-byte characters better.
For example, 'join -tX' now works even if X is a multi-byte character,
and both programs now treat multi-byte characters like U+3000
IDEOGRAPHIC SPACE as blanks if the current locale treats them so.
* numfmt options like --suffix no longer have an arbitrary 127-byte limit.
[bug introduced with numfmt in coreutils-8.21]
* mktemp with --suffix now better diagnoses templates with too few X's.
Previously it conflated the insignificant --suffix in the error.
[bug introduced in coreutils-8.1]
* sort again handles thousands grouping characters in single-byte locales
where the grouping character is greater than CHAR_MAX. For e.g. signed
character platforms with a 0xA0 (aka  ) grouping character.
[bug introduced in coreutils-9.1]
* split --line-bytes with a mixture of very long and short lines
no longer overwrites the heap (CVE-2024-0684).
[bug introduced in coreutils-9.2]
* tail no longer mishandles input from files in /proc and /sys file systems,
on systems with a page size larger than the stdio BUFSIZ.
[This bug was present in "the beginning".]
* timeout avoids a narrow race condition, where it might kill arbitrary
processes after a failed process fork.
[bug introduced with timeout in coreutils-7.0]
* timeout avoids a narrow race condition, where it might fail to
kill monitored processes immediately after forking them.
[bug introduced with timeout in coreutils-7.0]
* wc no longer fails to count unprintable characters as parts of words.
[bug introduced in textutils-2.1]
Changes in behavior:
* base32 and base64 no longer require padding when decoding.
Previously an error was given for non padded encoded data.
* base32 and base64 have improved detection of corrupted encodings.
Previously encodings with non zero padding bits were accepted.
* basenc --base16 -d now supports lower case hexadecimal characters.
Previously an error was given for lower case hex digits.
* cp --no-clobber, and mv -n no longer exit with failure status if
existing files are encountered in the destination. Instead they revert
to the behavior from before v9.2, silently skipping existing files.
* ls --dired now implies long format output without hyperlinks enabled,
and will take precedence over previously specified formats or hyperlink
mode.
* numfmt will accept lowercase 'k' to indicate Kilo or Kibi units on input,
and uses lowercase 'k' when outputting such units in '--to=si' mode.
* pinky no longer tries to canonicalize the user's login location by default,
rather requiring the new --lookup option to enable this often slow feature.
* wc no longer ignores encoding errors when counting words.
Instead, it treats them as non white space.
New features:
* chgrp now accepts the --from=OWNER:GROUP option to restrict changes to files
with matching current OWNER and/or GROUP, as already supported by chown(1).
* chmod adds support for -h, -H,-L,-P, and --dereference options, providing
more control over symlink handling. This supports more secure handling of
CLI arguments, and is more consistent with chown, and chmod on other
systems.
* cp now accepts the --keep-directory-symlink option (like tar), to preserve
and follow existing symlinks to directories in the destination.
* cp and mv now accept the --update=none-fail option, which is similar
to the --no-clobber option, except that existing files are diagnosed,
and the command exits with failure status if existing files.
The -n,--no-clobber option is best avoided due to platform differences.
* env now accepts the -a,--argv0 option to override the zeroth argument
of the command being executed.
* mv now accepts an --exchange option, which causes the source and
destination to be exchanged. It should be combined with
--no-target-directory (-T) if the destination is a directory.
The exchange is atomic if source and destination are on a single
file system that supports atomic exchange; --exchange is not yet
supported in other situations.
* od now supports printing IEEE half precision floating point with -t fH,
or brain 16 bit floating point with -t fB, where supported by the compiler.
* tail now supports following multiple processes, with repeated --pid options.
Improvements:
* cp,mv,install,cat,split now read and write a minimum of 256KiB at a time.
This was previously 128KiB and increasing to 256KiB was seen to increase
throughput by 10-20% when reading cached files on modern systems.
* env,kill,timeout now support unnamed signals. kill(1) for example now
supports sending such signals, and env(1) will list them appropriately.
* SELinux operations in file copy operations are now more efficient,
avoiding unneeded MCS/MLS label translation.
* sort no longer dynamically links to libcrypto unless -R is used.
This decreases startup overhead in the typical case.
* wc is now much faster in single-byte locales and somewhat faster in
multi-byte locales.
- coreutils-9.4.split-CVE-2024-0684.patch: Remove now-upstream patch.
- gnulib-readutmp-under-gdm.patch: Likewise.
- gnulib-readutmp.patch: Likewise.
- coreutils-i18n.patch: Remove multi-byte patches for join and uniq, as the
upstream version now handles those tests.
Pull in gnulib module mbchar manually, as it is a dependency of mbfile,
but dropped out of the upstream dependency chain.
- coreutils-misc.patch: Remove change for gnulib-tests/test-isnanl.h.
- coreutils-fix-gnulib-time_r-tests.patch: Add upstream gnulib patch to skip
French test if TZ='Europe/Paris' does not work.
OBS-URL: https://build.opensuse.org/request/show/1163997
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=362
2024-04-02 17:30:19 +02:00
|
|
|
@@ -17329,15 +17326,6 @@ This is non-portable, even across GNU/Li
|
2011-04-04 16:16:21 +02:00
|
|
|
Print the machine hardware name (sometimes called the hardware class
|
|
|
|
|
or hardware type).
|
2010-07-19 14:13:47 +02:00
|
|
|
|
2011-04-04 16:16:21 +02:00
|
|
|
-@item -n
|
|
|
|
|
-@itemx --nodename
|
|
|
|
|
-@opindex -n
|
|
|
|
|
-@opindex --nodename
|
|
|
|
|
-@cindex hostname
|
|
|
|
|
-@cindex node name
|
|
|
|
|
-@cindex network node name
|
|
|
|
|
-Print the network node hostname.
|
|
|
|
|
-
|
|
|
|
|
@item -p
|
|
|
|
|
@itemx --processor
|
|
|
|
|
@opindex -p
|
Accepting request 1163997 from home:berny:branches:Base:System
- Update to 9.5:
Bug fixes:
* chmod -R now avoids a race where an attacker may replace a traversed file
with a symlink, causing chmod to operate on an unintended file.
[This bug was present in "the beginning".]
* cp, mv, and install no longer issue spurious diagnostics like "failed
to preserve ownership" when copying to GNU/Linux CIFS file systems.
They do this by working around some Linux CIFS bugs.
* cp --no-preserve=mode will correctly maintain set-group-ID bits
for created directories. Previously on systems that didn't support ACLs,
cp would have reset the set-group-ID bit on created directories.
[bug introduced in coreutils-8.20]
* join and uniq now support multi-byte characters better.
For example, 'join -tX' now works even if X is a multi-byte character,
and both programs now treat multi-byte characters like U+3000
IDEOGRAPHIC SPACE as blanks if the current locale treats them so.
* numfmt options like --suffix no longer have an arbitrary 127-byte limit.
[bug introduced with numfmt in coreutils-8.21]
* mktemp with --suffix now better diagnoses templates with too few X's.
Previously it conflated the insignificant --suffix in the error.
[bug introduced in coreutils-8.1]
* sort again handles thousands grouping characters in single-byte locales
where the grouping character is greater than CHAR_MAX. For e.g. signed
character platforms with a 0xA0 (aka  ) grouping character.
[bug introduced in coreutils-9.1]
* split --line-bytes with a mixture of very long and short lines
no longer overwrites the heap (CVE-2024-0684).
[bug introduced in coreutils-9.2]
* tail no longer mishandles input from files in /proc and /sys file systems,
on systems with a page size larger than the stdio BUFSIZ.
[This bug was present in "the beginning".]
* timeout avoids a narrow race condition, where it might kill arbitrary
processes after a failed process fork.
[bug introduced with timeout in coreutils-7.0]
* timeout avoids a narrow race condition, where it might fail to
kill monitored processes immediately after forking them.
[bug introduced with timeout in coreutils-7.0]
* wc no longer fails to count unprintable characters as parts of words.
[bug introduced in textutils-2.1]
Changes in behavior:
* base32 and base64 no longer require padding when decoding.
Previously an error was given for non padded encoded data.
* base32 and base64 have improved detection of corrupted encodings.
Previously encodings with non zero padding bits were accepted.
* basenc --base16 -d now supports lower case hexadecimal characters.
Previously an error was given for lower case hex digits.
* cp --no-clobber, and mv -n no longer exit with failure status if
existing files are encountered in the destination. Instead they revert
to the behavior from before v9.2, silently skipping existing files.
* ls --dired now implies long format output without hyperlinks enabled,
and will take precedence over previously specified formats or hyperlink
mode.
* numfmt will accept lowercase 'k' to indicate Kilo or Kibi units on input,
and uses lowercase 'k' when outputting such units in '--to=si' mode.
* pinky no longer tries to canonicalize the user's login location by default,
rather requiring the new --lookup option to enable this often slow feature.
* wc no longer ignores encoding errors when counting words.
Instead, it treats them as non white space.
New features:
* chgrp now accepts the --from=OWNER:GROUP option to restrict changes to files
with matching current OWNER and/or GROUP, as already supported by chown(1).
* chmod adds support for -h, -H,-L,-P, and --dereference options, providing
more control over symlink handling. This supports more secure handling of
CLI arguments, and is more consistent with chown, and chmod on other
systems.
* cp now accepts the --keep-directory-symlink option (like tar), to preserve
and follow existing symlinks to directories in the destination.
* cp and mv now accept the --update=none-fail option, which is similar
to the --no-clobber option, except that existing files are diagnosed,
and the command exits with failure status if existing files.
The -n,--no-clobber option is best avoided due to platform differences.
* env now accepts the -a,--argv0 option to override the zeroth argument
of the command being executed.
* mv now accepts an --exchange option, which causes the source and
destination to be exchanged. It should be combined with
--no-target-directory (-T) if the destination is a directory.
The exchange is atomic if source and destination are on a single
file system that supports atomic exchange; --exchange is not yet
supported in other situations.
* od now supports printing IEEE half precision floating point with -t fH,
or brain 16 bit floating point with -t fB, where supported by the compiler.
* tail now supports following multiple processes, with repeated --pid options.
Improvements:
* cp,mv,install,cat,split now read and write a minimum of 256KiB at a time.
This was previously 128KiB and increasing to 256KiB was seen to increase
throughput by 10-20% when reading cached files on modern systems.
* env,kill,timeout now support unnamed signals. kill(1) for example now
supports sending such signals, and env(1) will list them appropriately.
* SELinux operations in file copy operations are now more efficient,
avoiding unneeded MCS/MLS label translation.
* sort no longer dynamically links to libcrypto unless -R is used.
This decreases startup overhead in the typical case.
* wc is now much faster in single-byte locales and somewhat faster in
multi-byte locales.
- coreutils-9.4.split-CVE-2024-0684.patch: Remove now-upstream patch.
- gnulib-readutmp-under-gdm.patch: Likewise.
- gnulib-readutmp.patch: Likewise.
- coreutils-i18n.patch: Remove multi-byte patches for join and uniq, as the
upstream version now handles those tests.
Pull in gnulib module mbchar manually, as it is a dependency of mbfile,
but dropped out of the upstream dependency chain.
- coreutils-misc.patch: Remove change for gnulib-tests/test-isnanl.h.
- coreutils-fix-gnulib-time_r-tests.patch: Add upstream gnulib patch to skip
French test if TZ='Europe/Paris' does not work.
OBS-URL: https://build.opensuse.org/request/show/1163997
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=362
2024-04-02 17:30:19 +02:00
|
|
|
@@ -17391,34 +17379,6 @@ Print the kernel version.
|
2010-07-19 14:13:47 +02:00
|
|
|
|
|
|
|
|
@exitstatus
|
|
|
|
|
|
|
|
|
|
-
|
|
|
|
|
-@node hostname invocation
|
|
|
|
|
-@section @command{hostname}: Print or set system name
|
|
|
|
|
-
|
|
|
|
|
-@pindex hostname
|
|
|
|
|
-@cindex setting the hostname
|
|
|
|
|
-@cindex printing the hostname
|
|
|
|
|
-@cindex system name, printing
|
|
|
|
|
-@cindex appropriate privileges
|
|
|
|
|
-
|
|
|
|
|
-With no arguments, @command{hostname} prints the name of the current host
|
|
|
|
|
-system. With one argument, it sets the current host name to the
|
|
|
|
|
-specified string. You must have appropriate privileges to set the host
|
|
|
|
|
-name. Synopsis:
|
|
|
|
|
-
|
|
|
|
|
-@example
|
|
|
|
|
-hostname [@var{name}]
|
|
|
|
|
-@end example
|
|
|
|
|
-
|
|
|
|
|
-The only options are @option{--help} and @option{--version}. @xref{Common
|
|
|
|
|
-options}.
|
|
|
|
|
-
|
- Update to 8.24:
** Bug fixes
* dd supports more robust SIGINFO/SIGUSR1 handling for outputting statistics.
Previously those signals may have inadvertently terminated the process.
* df --local no longer hangs with inaccessible remote mounts.
[bug introduced in coreutils-8.21]
* du now silently ignores all directory cycles due to bind mounts.
Previously it would issue a warning and exit with a failure status.
[bug introduced in coreutils-8.1 and partially fixed in coreutils-8.23]
* chroot again calls chroot(DIR) and chdir("/"), even if DIR is "/".
This handles separate bind mounted "/" trees, and environments
depending on the implicit chdir("/").
[bugs introduced in coreutils-8.23]
* cp no longer issues an incorrect warning about directory hardlinks when a
source directory is specified multiple times. Now, consistent with other
file types, a warning is issued for source directories with duplicate names,
or with -H the directory is copied again using the symlink name.
* factor avoids writing partial lines, thus supporting parallel operation.
[the bug dates back to the initial implementation]
* head, od, split, tac, tail, and wc no longer mishandle input from files in
/proc and /sys file systems that report somewhat-incorrect file sizes.
* mkdir --parents -Z now correctly sets the context for the last component,
even if the parent directory exists and has a different default context.
[bug introduced with the -Z restorecon functionality in coreutils-8.22]
* numfmt no longer outputs incorrect overflowed values seen with certain
large numbers, or with numbers with increased precision.
[bug introduced when numfmt was added in coreutils-8.21]
* numfmt now handles leading zeros correctly, not counting them when
settings processing limits, and making them optional with floating point.
[bug introduced when numfmt was added in coreutils-8.21]
* paste no longer truncates output for large input files. This would happen
for example with files larger than 4GiB on 32 bit systems with a '\n'
character at the 4GiB position.
[the bug dates back to the initial implementation]
* rm indicates the correct number of arguments in its confirmation prompt,
on all platforms. [bug introduced in coreutils-8.22]
* shuf -i with a single redundant operand, would crash instead of issuing
a diagnostic. [bug introduced in coreutils-8.22]
* tail releases inotify resources when unused. Previously it could exhaust
resources with many files, or with -F if files were replaced many times.
[bug introduced in coreutils-7.5]
* tail -f again follows changes to a file after it's renamed.
[bug introduced in coreutils-7.5]
* tail --follow no longer misses changes to files if those files were
replaced before inotify watches were created.
[bug introduced in coreutils-7.5]
* tail --follow consistently outputs all data for a truncated file.
[bug introduced in the beginning]
* tail --follow=name correctly outputs headers for multiple files
when those files are being created or renamed.
[bug introduced in coreutils-7.5]
** New features
* chroot accepts the new --skip-chdir option to not change the working directory
to "/" after changing into the chroot(2) jail, thus retaining the current wor-
king directory. The new option is only permitted if the new root directory is
the old "/", and therefore is useful with the --group and --userspec options.
* dd accepts a new status=progress level to print data transfer statistics
on stderr approximately every second.
* numfmt can now process multiple fields with field range specifications similar
to cut, and supports setting the output precision with the --format option.
* split accepts a new --separator option to select a record separator character
other than the default newline character.
* stty allows setting the "extproc" option where supported, which is
a useful setting with high latency links.
* sync no longer ignores arguments, and syncs each specified file, or with the
--file-system option, the file systems associated with each specified file.
* tee accepts a new --output-error option to control operation with pipes
and output errors in general.
** Changes in behavior
* df no longer suppresses separate exports of the same remote device, as
these are generally explicitly mounted. The --total option does still
suppress duplicate remote file systems.
[suppression was introduced in coreutils-8.21]
* mv no longer supports moving a file to a hardlink, instead issuing an error.
The implementation was susceptible to races in the presence of multiple mv
instances, which could result in both hardlinks being deleted. Also on case
insensitive file systems like HFS, mv would just remove a hardlinked 'file'
if called like `mv file File`. The feature was added in coreutils-5.0.1.
* numfmt --from-unit and --to-unit options now interpret suffixes as SI units,
and IEC (power of 2) units are now specified by appending 'i'.
* tee will exit early if there are no more writable outputs.
* tee does not treat the file operand '-' as meaning standard output any longer,
for better conformance to POSIX. This feature was added in coreutils-5.3.0.
* timeout --foreground no longer sends SIGCONT to the monitored process,
which was seen to cause intermittent issues with GDB for example.
** Improvements
* cp,install,mv will convert smaller runs of NULs in the input to holes,
and cp --sparse=always avoids speculative preallocation on XFS for example.
* cp will read sparse files more efficiently when the destination is a
non regular file. For example when copying a disk image to a device node.
* mv will try a reflink before falling back to a standard copy, which is
more efficient when moving files across BTRFS subvolume boundaries.
* stat and tail now know about IBRIX. stat -f --format=%T now reports the file
system type, and tail -f uses polling for files on IBRIX file systems.
* wc -l processes short lines much more efficiently.
* References from --help and the man pages of utilities have been corrected
in various cases, and more direct links to the corresponding online
documentation are provided.
- Patches adapted because of changed sources:
coreutils-disable_tests.patch
coreutils-i18n.patch
coreutils-misc.patch
coreutils-ocfs2_reflinks.patch
coreutils-remove_hostname_documentation.patch
coreutils-remove_kill_documentation.patch
coreutils-skip-gnulib-test-tls.patch
coreutils-tests-shorten-extreme-factor-tests.patch
sort-keycompare-mb.patch
- Patches removed because they're included in 8.24:
coreutils-chroot-perform-chdir-unless-skip-chdir.patch
coreutils-df-doc-df-a-includes-duplicate-file-systems.patch
coreutils-df-improve-mount-point-selection.patch
coreutils-df-show-all-remote-file-systems.patch
coreutils-df-total-suppress-separate-remotes.patch
coreutils-doc-adjust-reference-to-info-nodes-in-man-pages.patch
coreutils-fix_false_du_failure_on_newer_xfs.patch
coreutils-fix-man-deps.patch
coreutils-tests-aarch64-env.patch
coreutils-tests-make-inotify-rotate-more-robust-and-efficient.patch
coreutils-tests-rm-ext3-perf-increase-timeout.patch
OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=262
2015-07-09 17:40:19 +02:00
|
|
|
-@command{hostname} is not installed by default, and other packages
|
|
|
|
|
-also supply a @command{hostname} command, so portable scripts should
|
|
|
|
|
-not rely on its existence or on the exact behavior documented above.
|
|
|
|
|
-
|
2010-07-19 14:13:47 +02:00
|
|
|
-@exitstatus
|
|
|
|
|
-
|
|
|
|
|
|
2011-04-04 16:16:21 +02:00
|
|
|
@node hostid invocation
|
|
|
|
|
@section @command{hostid}: Print numeric host identifier
|
