coreutils/coreutils-misc.patch

32 lines
993 B
Diff
Raw Normal View History

---
tests/help/help-version.sh | 1 +
tests/other-fs-tmpdir | 3 +++
Accepting request 1163997 from home:berny:branches:Base:System - Update to 9.5: Bug fixes: * chmod -R now avoids a race where an attacker may replace a traversed file with a symlink, causing chmod to operate on an unintended file. [This bug was present in "the beginning".] * cp, mv, and install no longer issue spurious diagnostics like "failed to preserve ownership" when copying to GNU/Linux CIFS file systems. They do this by working around some Linux CIFS bugs. * cp --no-preserve=mode will correctly maintain set-group-ID bits for created directories. Previously on systems that didn't support ACLs, cp would have reset the set-group-ID bit on created directories. [bug introduced in coreutils-8.20] * join and uniq now support multi-byte characters better. For example, 'join -tX' now works even if X is a multi-byte character, and both programs now treat multi-byte characters like U+3000 IDEOGRAPHIC SPACE as blanks if the current locale treats them so. * numfmt options like --suffix no longer have an arbitrary 127-byte limit. [bug introduced with numfmt in coreutils-8.21] * mktemp with --suffix now better diagnoses templates with too few X's. Previously it conflated the insignificant --suffix in the error. [bug introduced in coreutils-8.1] * sort again handles thousands grouping characters in single-byte locales where the grouping character is greater than CHAR_MAX. For e.g. signed character platforms with a 0xA0 (aka &nbsp) grouping character. [bug introduced in coreutils-9.1] * split --line-bytes with a mixture of very long and short lines no longer overwrites the heap (CVE-2024-0684). [bug introduced in coreutils-9.2] * tail no longer mishandles input from files in /proc and /sys file systems, on systems with a page size larger than the stdio BUFSIZ. [This bug was present in "the beginning".] * timeout avoids a narrow race condition, where it might kill arbitrary processes after a failed process fork. [bug introduced with timeout in coreutils-7.0] * timeout avoids a narrow race condition, where it might fail to kill monitored processes immediately after forking them. [bug introduced with timeout in coreutils-7.0] * wc no longer fails to count unprintable characters as parts of words. [bug introduced in textutils-2.1] Changes in behavior: * base32 and base64 no longer require padding when decoding. Previously an error was given for non padded encoded data. * base32 and base64 have improved detection of corrupted encodings. Previously encodings with non zero padding bits were accepted. * basenc --base16 -d now supports lower case hexadecimal characters. Previously an error was given for lower case hex digits. * cp --no-clobber, and mv -n no longer exit with failure status if existing files are encountered in the destination. Instead they revert to the behavior from before v9.2, silently skipping existing files. * ls --dired now implies long format output without hyperlinks enabled, and will take precedence over previously specified formats or hyperlink mode. * numfmt will accept lowercase 'k' to indicate Kilo or Kibi units on input, and uses lowercase 'k' when outputting such units in '--to=si' mode. * pinky no longer tries to canonicalize the user's login location by default, rather requiring the new --lookup option to enable this often slow feature. * wc no longer ignores encoding errors when counting words. Instead, it treats them as non white space. New features: * chgrp now accepts the --from=OWNER:GROUP option to restrict changes to files with matching current OWNER and/or GROUP, as already supported by chown(1). * chmod adds support for -h, -H,-L,-P, and --dereference options, providing more control over symlink handling. This supports more secure handling of CLI arguments, and is more consistent with chown, and chmod on other systems. * cp now accepts the --keep-directory-symlink option (like tar), to preserve and follow existing symlinks to directories in the destination. * cp and mv now accept the --update=none-fail option, which is similar to the --no-clobber option, except that existing files are diagnosed, and the command exits with failure status if existing files. The -n,--no-clobber option is best avoided due to platform differences. * env now accepts the -a,--argv0 option to override the zeroth argument of the command being executed. * mv now accepts an --exchange option, which causes the source and destination to be exchanged. It should be combined with --no-target-directory (-T) if the destination is a directory. The exchange is atomic if source and destination are on a single file system that supports atomic exchange; --exchange is not yet supported in other situations. * od now supports printing IEEE half precision floating point with -t fH, or brain 16 bit floating point with -t fB, where supported by the compiler. * tail now supports following multiple processes, with repeated --pid options. Improvements: * cp,mv,install,cat,split now read and write a minimum of 256KiB at a time. This was previously 128KiB and increasing to 256KiB was seen to increase throughput by 10-20% when reading cached files on modern systems. * env,kill,timeout now support unnamed signals. kill(1) for example now supports sending such signals, and env(1) will list them appropriately. * SELinux operations in file copy operations are now more efficient, avoiding unneeded MCS/MLS label translation. * sort no longer dynamically links to libcrypto unless -R is used. This decreases startup overhead in the typical case. * wc is now much faster in single-byte locales and somewhat faster in multi-byte locales. - coreutils-9.4.split-CVE-2024-0684.patch: Remove now-upstream patch. - gnulib-readutmp-under-gdm.patch: Likewise. - gnulib-readutmp.patch: Likewise. - coreutils-i18n.patch: Remove multi-byte patches for join and uniq, as the upstream version now handles those tests. Pull in gnulib module mbchar manually, as it is a dependency of mbfile, but dropped out of the upstream dependency chain. - coreutils-misc.patch: Remove change for gnulib-tests/test-isnanl.h. - coreutils-fix-gnulib-time_r-tests.patch: Add upstream gnulib patch to skip French test if TZ='Europe/Paris' does not work. OBS-URL: https://build.opensuse.org/request/show/1163997 OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=362
2024-04-02 17:30:19 +02:00
2 files changed, 4 insertions(+)
Index: tests/help/help-version.sh
===================================================================
--- tests/help/help-version.sh.orig
+++ tests/help/help-version.sh
Accepting request 1080971 from home:berny:branches:Base:System - update to 9.3: Bug fixes: * cp --reflink=auto (the default), mv, and install will again fall back to a standard copy in more cases. Previously copies could fail with permission errors on more restricted systems like android or containers etc. [bug introduced in coreutils-9.2] * cp --recursive --backup will again operate correctly. Previousy it may have issued "File exists" errors when it failed to appropriately rename files being replaced. [bug introduced in coreutils-9.2] * date --file and dircolors will now diagnose a failure to read a file. Previously they would have silently ignored the failure. [This bug was present in "the beginning".] * md5sum --check again correctly prints the status of each file checked. Previously the status for files was printed as 'OK' once any file had passed. This also applies to cksum, sha*sum, and b2sum. [bug introduced in coreutils-9.2] * wc will now diagnose if any total counts have overflowed. [This bug was present in "the beginning".] * `wc -c` will again correctly update the read offset of inputs. Previously it deduced the size of inputs while leaving the offset unchanged. [bug introduced in coreutils-8.27] * Coreutils programs no longer fail for timestamps past the year 2038 on obsolete configurations with 32-bit signed time_t, because the build procedure now rejects these configurations. [This bug was present in "the beginning".] Changes in behavior: * 'cp -n' and 'mv -n' now issue an error diagnostic if skipping a file, to correspond with -n inducing a nonzero exit status as of coreutils 9.2. Similarly 'cp -v' and 'mv -v' will output a message for each file skipped due to -n, -i, or -u. New features: * cp and mv now support --update=none to always skip existing files in the destination, while not affecting the exit status. This is equivalent to the --no-clobber behavior from before v9.2. - drop fix-reflink-fallback.patch (upstream). - add coreutils-tests-skip-cpuinfo-replaced.patch: avoid FP test failure. OBS-URL: https://build.opensuse.org/request/show/1080971 OBS-URL: https://build.opensuse.org/package/show/Base:System/coreutils?expand=0&rev=350
2023-04-20 23:06:24 +02:00
@@ -241,6 +241,7 @@ parted_setup () { args="-s $tmp_in mklab
for i in $built_programs; do
# Skip these.
case $i in chroot|stty|tty|false|chcon|runcon|coreutils) continue;; esac
+ case $i in df) continue;; esac
rm -rf $tmp_in $tmp_in2 $tmp_dir $tmp_out $bigZ_in $zin $zin2
echo z |gzip > $zin
Index: tests/other-fs-tmpdir
===================================================================
--- tests/other-fs-tmpdir.orig
+++ tests/other-fs-tmpdir
@@ -43,6 +43,9 @@ for d in $CANDIDATE_TMP_DIRS; do
done
+# Autobuild hack
+test -f /bin/uname.bin && other_partition_tmpdir=
+
if test -z "$other_partition_tmpdir"; then
skip_ \
"requires a writable directory on a different file system,