diff --git a/crypto-policies-FIPS.patch b/crypto-policies-FIPS.patch
index 6dedf84..6e1b524 100644
--- a/crypto-policies-FIPS.patch
+++ b/crypto-policies-FIPS.patch
@@ -1,206 +1,173 @@
-Index: fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup
+Index: fedora-crypto-policies-20230614.5f3458e/fips-mode-setup
 ===================================================================
---- fedora-crypto-policies-20230420.3d08ae7.orig/fips-mode-setup
-+++ fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup
-@@ -7,6 +7,7 @@ enable_fips=
- check=0
- boot_config=1
- err_if_disabled=0
-+fips_install_complete=0
- output_text=1
- 
- is_ostree_system=0
-@@ -75,109 +76,74 @@ if test "$is_ostree_system" = 1 && test
-     exit 1
+--- fedora-crypto-policies-20230614.5f3458e.orig/fips-mode-setup
++++ fedora-crypto-policies-20230614.5f3458e/fips-mode-setup
+@@ -81,6 +81,19 @@ if [ "$(id -u)" != 0 ]; then
+ 	exit 1
  fi
  
--
--if [ "$(id -u)" != 0 ]; then
--	echo "You must be root to run $(basename $0)"
--	exit 1
--fi
--
--
--# Detect 1: kernel FIPS flag
--fips_kernel_enabled=$(cat /proc/sys/crypto/fips_enabled)
--
--# Detect 2: initramfs fips module presence; not always can be done
--initramfs_fips_module=0
--initramfs_inspectable=0
--if test -d /boot -a -x /usr/bin/lsinitrd; then
--	initramfs_inspectable=1
--	if lsinitrd -m 2>/dev/null | grep -Fxq fips; then
--		initramfs_fips_module=1
-+if test "$enable_fips" = 1 ; then
-+	# Check the required FIPS modules are installed
-+	if test ! -x "$(command -v grubby)" -o ! -f /usr/share/doc/packages/patterns/fips.txt -o ! -f /etc/dracut.conf.d/40-fips.conf; then
-+		cond_echo "Installation of FIPS modules is not complete."
-+		cond_echo "Please, install grubby and the fips pattern."
-+		exit 1
- 	fi
++# This check must be done as root, otherwise it will fail.
++is_transactional_system=0
++if test ! -w /usr ; then
++	is_transactional_system=1
++fi
++
++# We don't handle the setup on transactional systems as the process is
++# quite different and involves several reboots.
++if test "$is_transactional_system" = 1 && test "$check" = 0 ; then
++    cond_echo -n "Cannot handle transactional systems. "
++    cond_echo "Please, refer to the fips-mode-setup man pages for more information."
++    exit 1
++fi
+ 
+ # Detect 1: kernel FIPS flag
+ fips_kernel_enabled=$(cat /proc/sys/crypto/fips_enabled)
+@@ -203,9 +216,22 @@ else
+         fi
  fi
  
--# Detect 3: crypto-policy base policy
--current_policy="$(cat /etc/crypto-policies/state/current)"
--base_policy="$(echo $current_policy| cut -f 1 -d :)"
--if test "$base_policy" == "FIPS" ; then
--	base_policy_is_fips=1
--else
--	base_policy_is_fips=0
-+if test "$enable_fips" = 1 ; then
-+	if test ! -d /boot -o ! -x /usr/bin/lsinitrd -o x"$(/usr/bin/lsinitrd -f etc/system-fips 2>/dev/null || test $? = 2 && echo y)" != x ; then
-+	fips_install_complete=1
+-if test "$boot_config" = 1 && test ! -x "$(command -v grubby)" ; then
+-	echo "The grubby command is missing, please configure the bootloader manually."
+-	boot_config=0
++if test "$boot_config" = 1 ; then
++	# Install required packages: patterns-base-fips and perl-Bootloader
++	if test ! -f /etc/dracut.conf.d/40-fips.conf && \
++		test ! -x "$(command -v pbl)" && \
++		test "$enable_fips" = 1; then
++		zypper -n install patterns-base-fips perl-Bootloader
++	elif test ! -f /etc/dracut.conf.d/40-fips.conf && \
++		test "$enable_fips" = 1 ; then
++		zypper -n install patterns-base-fips
++	elif test ! -x "$(command -v pbl)" ; then
++		zypper -n install perl-Bootloader
++	fi
++	if test $? != 0 ; then
++		echo "The pbl command or the fips pattern are missing, please configure the bootloader manually."
++		boot_config=0
 +	fi
  fi
  
--
- if test $check = 1 ; then
--	# Look for signs for both enabling and disabling FIPS mode
--	fips_positive=0
--	fips_negative=0
--
--	# Display 1: kernel FIPS flag
--	cond_echo "FIPS mode is $(enable2txt $fips_kernel_enabled)."
--
--	# Display 2: initramfs fips module
--	if test "$initramfs_inspectable" = 1 ; then
--		cond_echo -n "Initramfs fips module is "
--		cond_echo "$(enable2txt $initramfs_fips_module)."
--	fi
--
--	# Display 3: active crypto-policy
--	cond_echo -n "The current crypto policy ($current_policy) "
--	if test "$base_policy_is_fips" == 1 ; then
--		cond_echo 'is based on the FIPS policy.'
--	else
--		cond_echo -n 'neither is the FIPS policy '
--		cond_echo 'nor is based on the FIPS policy.'
--	fi
--
--	# Decide 1: kernel FIPS flag
--	if test "$fips_kernel_enabled" = 1 ; then
--		fips_positive=1
--	else
--		fips_negative=1
--	fi
--
--	# Decide 2: initramfs module presence
--	if test "$initramfs_inspectable" = 1 ; then
--		if test "$initramfs_fips_module" = 1 ; then
--			fips_positive=1
+ echo "FIPS mode will be $(enable2txt $enable_fips)."
+@@ -216,15 +242,19 @@ if test $boot_config = 0 ; then
+ 	echo "Now you need to configure the bootloader to add kernel options \"$fipsopts\""
+ 	echo "and reboot the system for the setting to take effect."
+ else
+-	grubby --update-kernel=ALL --args="$fipsopts"
+-	if test x"$(uname -m)" = xs390x; then
+-		if command -v zipl >/dev/null; then
+-			zipl
 -		else
--			fips_negative=1
-+	test $fips_install_complete = 0 && cond_echo "Installation of FIPS modules is not complete."
-+	fips_enabled=$(cat /proc/sys/crypto/fips_enabled)
-+	cond_echo "FIPS mode is $(enable2txt $fips_enabled)."
-+	if test "$fips_enabled" = 1 ; then
-+		if test $fips_install_complete = 0 ; then
-+			cond_echo "Inconsistent state detected."
-+			exit 1
-+		fi
-+		current="$(cat /etc/crypto-policies/state/current)"
-+		if test "$(echo $current | cut -f 1 -d :)" != "FIPS" ; then
-+			cond_echo -n "The current crypto policy ($current) "
-+			cond_echo -n 'neither is the FIPS policy '
-+			cond_echo 'nor is based on the FIPS policy.'
-+			cond_echo 'Inconsistent state detected.'
-+			exit 1
- 		fi
+-			echo -n '`zipl` execution has been skipped: '
+-			echo '`zipl` not found.'
+-		fi
 -	fi
--
--	# Decide 3: active crypto-policy
--	if test "$base_policy_is_fips" = 1 ; then
--		fips_positive=1
- 	else
--		fips_negative=1
--	fi
--
--	# Make the FIPS mode consistency decision
--	if test "$fips_positive" = 1 -a "$fips_negative" = 1 ; then
--		cond_echo 'Inconsistent state detected.'
--		exit 1
-+		if test $fips_install_complete = 1 ; then
-+			cond_echo "Inconsistent state detected."
-+			exit 1
-+		fi
-+		current="$(cat /etc/crypto-policies/state/current)"
-+		if test "$(echo $current | cut -f 1 -d :)" == "FIPS" ; then
-+			cond_echo -n "The current crypto policy ($current) "
-+			cond_echo -n 'is based on the FIPS policy, '
-+			cond_echo 'but FIPS mode is not enabled.'
-+			cond_echo 'Inconsistent state detected.'
-+			exit 1
-+		fi
- 	fi
--
--	# Error out if `--is-enabled` was passed and FIPS mode is not enabled
--	if test "$fips_positive" = 0 -a "$err_if_disabled" = 1 ; then
--		cond_echo 'FIPS mode is not enabled.'
-+	if test "$fips_enabled" != 1 && test "$err_if_disabled" = 1; then
- 		exit 2
- 	fi
--
++	pbl --add-option "$fipsopts"
++	grub2-mkconfig -o /boot/grub2/grub.cfg && dracut -f --regenerate-all
++
++	# grubby --update-kernel=ALL --args="$fipsopts"
++	# if test x"$(uname -m)" = xs390x; then
++	# 	if command -v zipl >/dev/null; then
++	# 		zipl
++	# 	else
++	# 		echo -n '`zipl` execution has been skipped: '
++	# 		echo '`zipl` not found.'
++	# 	fi
++	# fi
++
+ 	echo "Please reboot the system for the setting to take effect."
+ fi
+ 
+Index: fedora-crypto-policies-20230614.5f3458e/fips-finish-install
+===================================================================
+--- fedora-crypto-policies-20230614.5f3458e.orig/fips-finish-install
++++ fedora-crypto-policies-20230614.5f3458e/fips-finish-install
+@@ -23,7 +23,16 @@ fi
+ 
+ umask 022
+ 
+-trap "rm -f $dracut_cfg" ERR
++# trap "rm -f $dracut_cfg" ERR
++
++# Install required packages: patterns-base-fips and perl-Bootloader
++if test ! -f $dracut_cfg && test ! -x "$(command -v pbl)" ; then
++	zypper -n install patterns-base-fips perl-Bootloader
++elif test ! -f $dracut_cfg ; then
++	zypper -n install patterns-base-fips
++elif test ! -x "$(command -v pbl)" ; then
++	zypper -n install perl-Bootloader
++fi
+ 
+ if test ! -d $dracut_cfg_d -o ! -d /boot -o "$is_ostree_system" = 1 ; then
+ 	# No dracut configuration or boot directory present, do not try to modify it.
+@@ -32,23 +41,23 @@ if test ! -d $dracut_cfg_d -o ! -d /boot
  	exit 0
  fi
  
-+if [ "$(id -u)" != 0 ]; then
-+	echo "You must be root to run $(basename $0)"
-+	exit 1
-+fi
- 
- if test $enable_fips = 1 ; then
--	if test "$initramfs_fips_module" = 0 ; then
-+	if test $fips_install_complete = 1 ; then
- 		fips-finish-install --complete
- 		if test $? != 0 ; then
--			echo "Installation of FIPS modules could not be completed."
-+	 		echo "Installation of FIPS modules could not be completed."
- 			exit 1
- 		fi
- 	fi
--	if test "$base_policy_is_fips" == 1 ; then
--		cond_echo -n 'Preserving current FIPS-based policy '
--		cond_echo "${current_policy}."
-+	target="$(cat /etc/crypto-policies/state/current)"
-+	if test "$(echo $target | cut -f 1 -d :)" == "FIPS" ; then
-+	    cond_echo "Preserving current FIPS-based policy ${target}."
- 		cond_echo -n 'Please review the subpolicies to ensure they '
- 		cond_echo 'only restrict, not relax the FIPS policy.'
- 	else
-@@ -196,11 +162,11 @@ if test x"$boot_device" = x ; then
- 	boot_device_opt=" boot=UUID=<your-boot-device-uuid>"
- 	boot_config=0
- else
--        if test "$boot_device" = / ; then
--            boot_device_opt=""
--        else
--            boot_device_opt=" boot=UUID=$(blkid -s UUID -o value $boot_device)"
--        fi
-+	if test "$boot_device" = / ; then
-+		boot_device_opt=""
-+	else
-+		boot_device_opt=" boot=UUID=$(blkid -s UUID -o value $boot_device)"
-+	fi
- fi
- 
- if test "$boot_config" = 1 && test ! -x "$(command -v grubby)" ; then
-Index: fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup.8.txt
+-cat >$dracut_cfg <<EOF
+-# turn on fips module
+-
+-add_dracutmodules+=" fips "
+-EOF
+-
+-echo "Kernel initramdisks are being regenerated. This might take some time."
+-
+-dracut -f --regenerate-all
+-
+-# This is supposed to be a fast and safe operation that's always good to run.
+-# Regenerating an initrd and skipping it might render the system unbootable
+-# (RHBZ#2013195).
+-if test x"$(uname -m)" = xs390x; then
+-	if command -v zipl >/dev/null; then
+-		zipl
+-	else
+-		echo '`zipl` execution has been skipped: `zipl` not found.'
+-	fi
+-fi
++# cat >$dracut_cfg <<EOF
++# # turn on fips module
++#
++# add_dracutmodules+=" fips "
++# EOF
++#
++# echo "Kernel initramdisks are being regenerated. This might take some time."
++#
++# dracut -f --regenerate-all
++#
++# # This is supposed to be a fast and safe operation that's always good to run.
++# # Regenerating an initrd and skipping it might render the system unbootable
++# # (RHBZ#2013195).
++# if test x"$(uname -m)" = xs390x; then
++# 	if command -v zipl >/dev/null; then
++# 		zipl
++# 	else
++# 		echo '`zipl` execution has been skipped: `zipl` not found.'
++# 	fi
++# fi
+Index: fedora-crypto-policies-20230614.5f3458e/fips-mode-setup.8.txt
 ===================================================================
---- fedora-crypto-policies-20230420.3d08ae7.orig/fips-mode-setup.8.txt
-+++ fedora-crypto-policies-20230420.3d08ae7/fips-mode-setup.8.txt
-@@ -39,8 +39,15 @@ system crypto policy to FIPS
- (unless the policy has already been set to FIPS plus subpolicies on top,
- in which case the currently active subpolicies is retained).
- 
-+Some required FIPS modules (grubby, fips pattern) might not be
-+installed by default. These can be installed in SUSE/openSUSE with
-+the following command:
-+
-+    zypper in -y grubby && zypper in -y -t pattern fips
-+
- Then the command modifies the boot loader configuration to add
- 'fips=1' and 'boot=<boot-device>' options to the kernel command line.
-+Note that, grubby could show a harmless warning about leaked file descriptors.
- 
+--- fedora-crypto-policies-20230614.5f3458e.orig/fips-mode-setup.8.txt
++++ fedora-crypto-policies-20230614.5f3458e/fips-mode-setup.8.txt
+@@ -45,6 +45,23 @@ Then the command modifies the boot loade
  When disabling the system FIPS mode the system crypto policy is switched
  to DEFAULT and the kernel command line option 'fips=0' is set.
+ 
++On transactional systems, enabling the system in FIPS mode with the
++fips-mode-setup tool is not implemented. To enable the FIPS mode in these
++systems requires the following steps:
++
++	1.- Install the FIPS pattern on a running system:
++	    # transactional-update pkg install -t pattern microos-fips
++
++	2.- Reboot your system.
++
++	3.- Add the kernel command line parameter fips=1 to the boot loader
++	    configuration. To do so, edit the file /etc/default/grub and add
++	    fips=1 to the GRUB_CMDLINE_LINUX_DEFAULT variable.
++
++	4.- After logging in to the system, run:
++	    # transactional-update grub.cfg
++
++	5.- Reboot your system.
+ 
+ [[options]]
+ OPTIONS
diff --git a/crypto-policies-policygenerators.patch b/crypto-policies-policygenerators.patch
index d5e2eb0..c4f8a21 100644
--- a/crypto-policies-policygenerators.patch
+++ b/crypto-policies-policygenerators.patch
@@ -1,13 +1,13 @@
-Index: fedora-crypto-policies-20230420.3d08ae7/python/policygenerators/__init__.py
+Index: fedora-crypto-policies-20230614.5f3458e/python/policygenerators/__init__.py
 ===================================================================
---- fedora-crypto-policies-20230420.3d08ae7.orig/python/policygenerators/__init__.py
-+++ fedora-crypto-policies-20230420.3d08ae7/python/policygenerators/__init__.py
+--- fedora-crypto-policies-20230614.5f3458e.orig/python/policygenerators/__init__.py
++++ fedora-crypto-policies-20230614.5f3458e/python/policygenerators/__init__.py
 @@ -8,15 +8,15 @@ from .gnutls import GnuTLSGenerator
  from .java import JavaGenerator
  from .java import JavaSystemGenerator
  from .krb5 import KRB5Generator
 -from .libreswan import LibreswanGenerator
-+#from .libreswan import LibreswanGenerator
++# from .libreswan import LibreswanGenerator
  from .libssh import LibsshGenerator
  from .nss import NSSGenerator
  from .openssh import OpenSSHClientGenerator
@@ -16,17 +16,16 @@ Index: fedora-crypto-policies-20230420.3d08ae7/python/policygenerators/__init__.
  from .openssl import OpenSSLGenerator
 -from .sequoia import SequoiaGenerator
 -from .sequoia import RPMSequoiaGenerator
-+#from .sequoia import SequoiaGenerator
-+#from .sequoia import RPMSequoiaGenerator
++# from .sequoia import SequoiaGenerator
++# from .sequoia import RPMSequoiaGenerator
  
  __all__ = [
      'BindGenerator',
-@@ -24,13 +24,13 @@ __all__ = [
+@@ -24,13 +24,14 @@ __all__ = [
      'JavaGenerator',
      'JavaSystemGenerator',
      'KRB5Generator',
 -    'LibreswanGenerator',
-+#    'LibreswanGenerator',
      'LibsshGenerator',
      'NSSGenerator',
      'OpenSSHClientGenerator',
@@ -35,6 +34,8 @@ Index: fedora-crypto-policies-20230420.3d08ae7/python/policygenerators/__init__.
      'OpenSSLGenerator',
 -    'SequoiaGenerator',
 -    'RPMSequoiaGenerator',
+ ]
++
++#    'LibreswanGenerator',
 +#    'SequoiaGenerator',
 +#    'RPMSequoiaGenerator',
- ]
diff --git a/crypto-policies-pylint.patch b/crypto-policies-pylint.patch
new file mode 100644
index 0000000..717f30a
--- /dev/null
+++ b/crypto-policies-pylint.patch
@@ -0,0 +1,15 @@
+Index: fedora-crypto-policies-20230614.5f3458e/Makefile
+===================================================================
+--- fedora-crypto-policies-20230614.5f3458e.orig/Makefile
++++ fedora-crypto-policies-20230614.5f3458e/Makefile
+@@ -44,8 +44,8 @@ runflake8:
+ 	@find -name '*.py' | grep -v krb5check | xargs flake8 --config .flake8
+ 
+ runpylint:
+-	PYTHONPATH=. pylint$(PYVERSION) --rcfile=pylintrc python
+-	PYTHONPATH=. pylint$(PYVERSION) --rcfile=pylintrc tests
++	PYTHONPATH=. pylint --rcfile=pylintrc python
++	PYTHONPATH=. pylint --rcfile=pylintrc tests
+ 	@echo "[ OK ]"
+ 
+ runcodespell:
diff --git a/crypto-policies.7.gz b/crypto-policies.7.gz
index 81e15c2..aa32641 100644
--- a/crypto-policies.7.gz
+++ b/crypto-policies.7.gz
@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:5eceb5b5a5360d08e1f85163bea95bdb84c748e1e3836765b400773d42bba1c9
+oid sha256:6071a2f41678232b63d27d3f1bbd73915f85159fda78f71ae8a63d8bdce388e0
 size 6937
diff --git a/crypto-policies.changes b/crypto-policies.changes
index 451d982..0de8af0 100644
--- a/crypto-policies.changes
+++ b/crypto-policies.changes
@@ -1,3 +1,19 @@
+-------------------------------------------------------------------
+Thu Aug 31 12:17:44 UTC 2023 - Pedro Monreal <pmonreal@suse.com>
+
+- Tests: Fix pylint versioning for TW and fix the parsing of the
+  policygenerators to account for the commented lines correctly.
+  * Add crypto-policies-pylint.patch
+  * Rebase crypto-policies-policygenerators.patch
+
+-------------------------------------------------------------------
+Tue Aug  1 12:23:33 UTC 2023 - Pedro Monreal <pmonreal@suse.com>
+
+- FIPS: Adapt the fips-mode-setup script to use the pbl command
+  from the perl-Bootloader package to replace grubby. Add a note
+  for transactional systems [jsc#PED-4578].
+  * Rebase crypto-policies-FIPS.patch
+
 -------------------------------------------------------------------
 Fri Jul 14 14:59:06 UTC 2023 - Marcus Meissner <meissner@suse.com>
 
diff --git a/crypto-policies.spec b/crypto-policies.spec
index 684d8fa..0116b1b 100644
--- a/crypto-policies.spec
+++ b/crypto-policies.spec
@@ -51,8 +51,10 @@ Patch2:         crypto-policies-policygenerators.patch
 Patch3:         crypto-policies-supported.patch
 #PATCH-FIX-OPENSUSE Revert a breaking change that introduces rh-allow-sha1-signatures
 Patch4:         crypto-policies-revert-rh-allow-sha1-signatures.patch
-#PATCH-FIX-OPENSUSE Adpat the fips-mode-setup script for TW
-Patch5:         crypto-policies-FIPS.patch
+#PATCH-FIX-OPENSUSE Remove version for pylint from Makefile
+Patch5:         crypto-policies-pylint.patch
+#PATCH-FIX-OPENSUSE Adpat the fips-mode-setup script for SUSE/openSUSE [jsc#PED-4578]
+Patch6:         crypto-policies-FIPS.patch
 BuildRequires:  python3-base >= 3.6
 # The sequoia stuff needs python3-toml, removed until needed
 # BuildRequires:  python3-toml
@@ -62,10 +64,12 @@ BuildRequires:  asciidoc
 %if %{with testsuite}
 # The following packages are needed for the testsuite
 BuildRequires:  bind
+BuildRequires:  codespell
 BuildRequires:  gnutls >= 3.6.0
 BuildRequires:  java-devel
 BuildRequires:  krb5-devel
 BuildRequires:  libxslt
+#BuildRequires:  mozilla-nss-tools
 BuildRequires:  openssl
 BuildRequires:  perl
 BuildRequires:  python3-coverage
@@ -79,9 +83,9 @@ BuildRequires:  perl(File::Which)
 BuildRequires:  perl(File::pushd)
 %endif
 Recommends:     crypto-policies-scripts
-Conflicts:      gnutls < 3.7.0
+Conflicts:      gnutls < 3.7.3
 #Conflicts:      libreswan < 3.28
-Conflicts:      nss < 3.44.0
+Conflicts:      nss < 3.90.0
 #Conflicts:      openssh < 8.2p1
 #!BuildIgnore:  crypto-policies
 BuildArch:      noarch
@@ -94,7 +98,7 @@ such as SSL/TLS libraries.
 %package scripts
 Summary:        Tool to switch between crypto policies
 Requires:       %{name} = %{version}-%{release}
-Recommends:     grubby
+Recommends:     perl-Bootloader
 
 %description scripts
 This package provides a tool update-crypto-policies, which applies
@@ -141,11 +145,11 @@ install -p -m 644 default-config %{buildroot}%{_sysconfdir}/crypto-policies/conf
 touch %{buildroot}%{_sysconfdir}/crypto-policies/state/current
 touch %{buildroot}%{_sysconfdir}/crypto-policies/state/CURRENT.pol
 
-%if %{without manbuild}
-# Install the manpages from defined sources
 mkdir -p -m 755 %{buildroot}%{_mandir}/
 mkdir -p -m 755 %{buildroot}%{_mandir}/man7/
 mkdir -p -m 755 %{buildroot}%{_mandir}/man8/
+%if %{without manbuild}
+# Install the manpages from defined sources
 cp %{SOURCE2} %{buildroot}%{_mandir}/man7/
 cp %{SOURCE3} %{SOURCE4} %{SOURCE5} %{buildroot}%{_mandir}/man8/
 %endif
@@ -181,7 +185,8 @@ install -p -m 644 %{SOURCE1} %{buildroot}%{_sysconfdir}/crypto-policies
 %check
 %if %{with testsuite}
 export OPENSSL_CONF=''
-%make_build test test-install test-fips-setup || :
+%make_build test
+%make_build test-install test-fips-setup || :
 %endif
 
 %post -p <lua>
diff --git a/fips-finish-install.8.gz b/fips-finish-install.8.gz
index 7459f19..3767c05 100644
--- a/fips-finish-install.8.gz
+++ b/fips-finish-install.8.gz
@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:b0c4844eb573ddb5517d78c0e2e663066413ef3807dfa63df5ee43c0fefe1582
+oid sha256:3036b9fde1e86342746075d825d23eab12ee54228ebae9b6746e93bd51e3ada8
 size 825
diff --git a/fips-mode-setup.8.gz b/fips-mode-setup.8.gz
index cc679da..e73a349 100644
--- a/fips-mode-setup.8.gz
+++ b/fips-mode-setup.8.gz
@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:af453be70b0971f4e4139eec3b669bee3b5195df2d7c28853d3fd4c4006cbb1b
-size 1542
+oid sha256:b29d2ba880077b33ef73932ca13ef88581e66288c4277a610aff9afa3a354b59
+size 1648
diff --git a/update-crypto-policies.8.gz b/update-crypto-policies.8.gz
index 5dd3484..6d4a2e2 100644
--- a/update-crypto-policies.8.gz
+++ b/update-crypto-policies.8.gz
@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:cad2a9da340059b6ba7b84c9646a85f113cb8781d55c0ea5c8aa0422ea632c3c
+oid sha256:950fcd3d9729c215baaa0dddb9434b01f02addca6aa4a4404a8d2ad65ef53598
 size 4154