diff --git a/_service b/_service
new file mode 100644
index 0000000..a4fe9ef
--- /dev/null
+++ b/_service
@@ -0,0 +1,16 @@
+
+
+ git://git.linbit.com/csync2.git
+ git
+ .git
+ 2.0+git.%ct.%h
+ master
+
+
+
+ csync2*.tar
+ bz2
+
+
+
+
diff --git a/add-COPYING.patch b/add-COPYING.patch
new file mode 100644
index 0000000..b415a99
--- /dev/null
+++ b/add-COPYING.patch
@@ -0,0 +1,13 @@
+Index: csync2-2.0+git.1368794815.cf835a7/Makefile.am
+===================================================================
+--- csync2-2.0+git.1368794815.cf835a7.orig/Makefile.am
++++ csync2-2.0+git.1368794815.cf835a7/Makefile.am
+@@ -40,7 +40,7 @@ CLEANFILES = cfgfile_parser.c cfgfile_pa
+
+ DISTCLEANFILES = config.status config.h .deps/*.Po stamp-h1 Makefile Makefile.in configure
+
+-docfiles = ChangeLog README AUTHORS
++docfiles = ChangeLog README AUTHORS COPYING
+
+ if HAVE_PDFLATEX
+
diff --git a/add-ac_prog_cpp.patch b/add-ac_prog_cpp.patch
new file mode 100644
index 0000000..2aa3f07
--- /dev/null
+++ b/add-ac_prog_cpp.patch
@@ -0,0 +1,12 @@
+Index: csync2-2.0+git.1368794815.cf835a7/configure.ac
+===================================================================
+--- csync2-2.0+git.1368794815.cf835a7.orig/configure.ac
++++ csync2-2.0+git.1368794815.cf835a7/configure.ac
+@@ -29,6 +29,7 @@ AM_CONFIG_HEADER(config.h)
+
+ # Checks for programs.
+ AC_PROG_CC
++AC_PROG_CPP
+ AC_PROG_INSTALL
+ AC_PROG_YACC
+ AM_PROG_LEX
diff --git a/bind-to-local-hostname.patch b/bind-to-local-hostname.patch
deleted file mode 100644
index 39ffe34..0000000
--- a/bind-to-local-hostname.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Index: csync2-1.34/conn.c
-===================================================================
---- csync2-1.34.orig/conn.c
-+++ csync2-1.34/conn.c
-@@ -50,7 +50,9 @@ SSL *conn_ssl;
- int conn_open(const char *peername)
- {
- struct sockaddr_in sin;
-+ struct sockaddr_in sme;
- struct hostent *hp;
-+ struct hostent *me;
- int on = 1;
-
- hp = gethostbyname(peername);
-@@ -69,6 +71,23 @@ int conn_open(const char *peername)
- bcopy(hp->h_addr, &sin.sin_addr, hp->h_length);
- sin.sin_port = htons(csync_port);
-
-+ /* Try to bind to IP address of local hostname, else in cases where
-+ * there's multiple local IPs on the same subnet, we might autobind
-+ * to the wrong one, and the remote csync2 instance will fail because
-+ * it verifies the expected hostname against the initiating IP.
-+ * If the explicit bind fails for some reason though, we'll still
-+ * try to connect (it might work, and it can't hurt...).
-+ */
-+ me = gethostbyname(myhostname);
-+ if (me) {
-+ sme.sin_family = me->h_addrtype;
-+ bcopy(me->h_addr, &sme.sin_addr, me->h_length);
-+ sme.sin_port = 0; /* random port */
-+ if (bind(conn_fd_in, (struct sockaddr *)&sme, sizeof(sme)) < 0) {
-+ csync_debug(1, "Can't bind local socket (attempting connect anyway).\n");
-+ }
-+ }
-+
- if (connect(conn_fd_in, (struct sockaddr *)&sin, sizeof (sin)) < 0) {
- csync_debug(1, "Can't connect to remote host.\n");
- close(conn_fd_in); conn_fd_in = -1;
diff --git a/csync2-1.34-pure-gnutls-r2.patch b/csync2-1.34-pure-gnutls-r2.patch
deleted file mode 100644
index 165647c..0000000
--- a/csync2-1.34-pure-gnutls-r2.patch
+++ /dev/null
@@ -1,5227 +0,0 @@
-Index: csync2-1.34/Makefile.in
-===================================================================
---- csync2-1.34.orig/Makefile.in
-+++ csync2-1.34/Makefile.in
-@@ -81,6 +81,8 @@ ECHO_C = @ECHO_C@
- ECHO_N = @ECHO_N@
- ECHO_T = @ECHO_T@
- EXEEXT = @EXEEXT@
-+HAVE_LIBGNUTLS_FALSE = @HAVE_LIBGNUTLS_FALSE@
-+HAVE_LIBGNUTLS_TRUE = @HAVE_LIBGNUTLS_TRUE@
- INSTALL_DATA = @INSTALL_DATA@
- INSTALL_PROGRAM = @INSTALL_PROGRAM@
- INSTALL_SCRIPT = @INSTALL_SCRIPT@
-@@ -104,6 +106,7 @@ PACKAGE_STRING = @PACKAGE_STRING@
- PACKAGE_TARNAME = @PACKAGE_TARNAME@
- PACKAGE_VERSION = @PACKAGE_VERSION@
- PATH_SEPARATOR = @PATH_SEPARATOR@
-+PKG_CONFIG = @PKG_CONFIG@
- PRIVATE_LIBRSYNC_FALSE = @PRIVATE_LIBRSYNC_FALSE@
- PRIVATE_LIBRSYNC_TRUE = @PRIVATE_LIBRSYNC_TRUE@
- PRIVATE_LIBSQLITE_FALSE = @PRIVATE_LIBSQLITE_FALSE@
-@@ -215,7 +218,7 @@ MANS = $(man_MANS)
- DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \
- COPYING ChangeLog INSTALL Makefile.am NEWS TODO aclocal.m4 \
- cfgfile_parser.c cfgfile_parser.h cfgfile_scanner.c config.h.in \
-- configure.ac depcomp install-sh missing mkinstalldirs
-+ configure configure.ac depcomp install-sh missing mkinstalldirs
- SOURCES = $(csync2_SOURCES)
-
- all: $(BUILT_SOURCES) config.h
-Index: csync2-1.34/aclocal.m4
-===================================================================
---- csync2-1.34.orig/aclocal.m4
-+++ csync2-1.34/aclocal.m4
-@@ -833,32 +833,6 @@ AC_CONFIG_COMMANDS_PRE(
- Usually this means the macro was only invoked conditionally.])
- fi])])
-
--# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
--
--# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
--
--AC_PREREQ([2.52])
--
--# serial 6
--
--# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
--AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
--
-
- # Copyright 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-@@ -899,6 +873,9 @@ dnl $id$
- # Configure paths for LIBGCRYPT
- # Shamelessly stolen from the one of XDELTA by Owen Taylor
- # Werner Koch 99-12-09
-+# 10-years-old code is not as good as brandy would...
-+# gnutls now uses pkg-config and doesn't ship gnutls-config anymore.
-+# Giampaolo Tomassoni 2009-09-15
-
- dnl AM_PATH_LIBGNUTLS([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]])
- dnl Test for libgnutls, and define LIBGNUTLS_CFLAGS and LIBGNUTLS_LIBS
-@@ -911,34 +888,43 @@ AC_ARG_WITH(libgnutls-prefix,
- [ --with-libgnutls-prefix=PFX Prefix where libgnutls is installed (optional)],
- libgnutls_config_prefix="$withval", libgnutls_config_prefix="")
-
-- if test x$libgnutls_config_prefix != x ; then
-- if test x${LIBGNUTLS_CONFIG+set} != xset ; then
-- LIBGNUTLS_CONFIG=$libgnutls_config_prefix/bin/libgnutls-config
-- fi
-- fi
--
-- AC_PATH_PROG(LIBGNUTLS_CONFIG, libgnutls-config, no)
- min_libgnutls_version=ifelse([$1], ,0.1.0,$1)
- AC_MSG_CHECKING(for libgnutls - version >= $min_libgnutls_version)
-- no_libgnutls=""
-- if test "$LIBGNUTLS_CONFIG" = "no" ; then
-- no_libgnutls=yes
-- else
-- LIBGNUTLS_CFLAGS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --cflags`
-- LIBGNUTLS_LIBS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --libs`
-- libgnutls_config_version=`$LIBGNUTLS_CONFIG $libgnutls_config_args --version`
-
-+ PKG_CHECK_EXISTS(
-+ gnutls,
-+ [
-+ LIBGNUTLS_CFLAGS=`$PKG_CONFIG --cflags gnutls`
-+ LIBGNUTLS_LIBS=`$PKG_CONFIG --libs gnutls`
-+ libgnutls_config_version=`$PKG_CONFIG --modversion gnutls`
-+ ],
-+ [
-+ AC_PATH_PROG(LIBGNUTLS_CONFIG, libgnutls-config,, [$libgnutls_config_prefix/bin$PATH_SEPARATOR$PATH])
-+ if test "$LIBGNUTLS_CONFIG"=no
-+ then
-+ no_libgnutls=yes
-+ echo "Can't obtain gnutls package info!" >&2
-+ fi
-+
-+ LIBGNUTLS_CFLAGS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --cflags`
-+ LIBGNUTLS_LIBS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --libs`
-+ libgnutls_config_version=`$LIBGNUTLS_CONFIG $libgnutls_config_args --version`
-+ ]
-+ )
-+
-+ if test "$no_libgnutls" != no
-+ then
-+ ac_save_CFLAGS="$CFLAGS"
-+ ac_save_LIBS="$LIBS"
-+ CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
-+ LIBS="$LIBS $LIBGNUTLS_LIBS"
-
-- ac_save_CFLAGS="$CFLAGS"
-- ac_save_LIBS="$LIBS"
-- CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
-- LIBS="$LIBS $LIBGNUTLS_LIBS"
- dnl
- dnl Now check if the installed libgnutls is sufficiently new. Also sanity
- dnl checks the results of libgnutls-config to some extent
- dnl
-- rm -f conf.libgnutlstest
-- AC_TRY_RUN([
-+ rm -f conf.libgnutlstest
-+ AC_TRY_RUN([
- #include
- #include
- #include
-@@ -1000,6 +986,8 @@ main ()
- if test "x$no_libgnutls" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
-+
-+ AC_DEFINE([HAVE_LIBGNUTLS], [1], [Define to 1 if you have the `gnutls' library (-lgnutls).])
- else
- if test -f conf.libgnutlstest ; then
- :
-@@ -1045,11 +1033,166 @@ main ()
- LIBGNUTLS_CFLAGS=""
- LIBGNUTLS_LIBS=""
- ifelse([$3], , :, [$3])
-- fi
-+ fi
-+
- rm -f conf.libgnutlstest
- AC_SUBST(LIBGNUTLS_CFLAGS)
- AC_SUBST(LIBGNUTLS_LIBS)
- ])
-
--dnl *-*wedit:notab*-* Please keep this as the last line.
-+# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-+#
-+# Copyright © 2004 Scott James Remnant .
-+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful, but
-+# WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+# General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+#
-+# As a special exception to the GNU General Public License, if you
-+# distribute this file as part of a program that contains a
-+# configuration script generated by Autoconf, you may include it under
-+# the same distribution terms that you use for the rest of that program.
-+
-+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-+# ----------------------------------
-+AC_DEFUN([PKG_PROG_PKG_CONFIG],
-+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
-+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
-+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
-+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-+ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
-+fi
-+if test -n "$PKG_CONFIG"; then
-+ _pkg_min_version=m4_default([$1], [0.9.0])
-+ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
-+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-+ AC_MSG_RESULT([yes])
-+ else
-+ AC_MSG_RESULT([no])
-+ PKG_CONFIG=""
-+ fi
-+
-+fi[]dnl
-+])# PKG_PROG_PKG_CONFIG
-+
-+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-+#
-+# Check to see whether a particular set of modules exists. Similar
-+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-+#
-+#
-+# Similar to PKG_CHECK_MODULES, make sure that the first instance of
-+# this or PKG_CHECK_MODULES is called, or make sure to call
-+# PKG_CHECK_EXISTS manually
-+# --------------------------------------------------------------
-+AC_DEFUN([PKG_CHECK_EXISTS],
-+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-+if test -n "$PKG_CONFIG" && \
-+ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
-+ m4_ifval([$2], [$2], [:])
-+m4_ifvaln([$3], [else
-+ $3])dnl
-+fi])
-+
-+
-+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-+# ---------------------------------------------
-+m4_define([_PKG_CONFIG],
-+[if test -n "$$1"; then
-+ pkg_cv_[]$1="$$1"
-+ elif test -n "$PKG_CONFIG"; then
-+ PKG_CHECK_EXISTS([$3],
-+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
-+ [pkg_failed=yes])
-+ else
-+ pkg_failed=untried
-+fi[]dnl
-+])# _PKG_CONFIG
-+
-+# _PKG_SHORT_ERRORS_SUPPORTED
-+# -----------------------------
-+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
-+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
-+ _pkg_short_errors_supported=yes
-+else
-+ _pkg_short_errors_supported=no
-+fi[]dnl
-+])# _PKG_SHORT_ERRORS_SUPPORTED
-+
-+
-+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-+# [ACTION-IF-NOT-FOUND])
-+#
-+#
-+# Note that if there is a possibility the first call to
-+# PKG_CHECK_MODULES might not happen, you should be sure to include an
-+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-+#
-+#
-+# --------------------------------------------------------------
-+AC_DEFUN([PKG_CHECK_MODULES],
-+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
-+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
-+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
-+
-+pkg_failed=no
-+AC_MSG_CHECKING([for $1])
-+
-+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
-+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
-+
-+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
-+and $1[]_LIBS to avoid the need to call pkg-config.
-+See the pkg-config man page for more details.])
-+
-+if test $pkg_failed = yes; then
-+ _PKG_SHORT_ERRORS_SUPPORTED
-+ if test $_pkg_short_errors_supported = yes; then
-+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
-+ else
-+ $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
-+ fi
-+ # Put the nasty error message in config.log where it belongs
-+ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
-+
-+ ifelse([$4], , [AC_MSG_ERROR(dnl
-+[Package requirements ($2) were not met:
-+
-+$$1_PKG_ERRORS
-+
-+Consider adjusting the PKG_CONFIG_PATH environment variable if you
-+installed software in a non-standard prefix.
-+
-+_PKG_TEXT
-+])],
-+ [AC_MSG_RESULT([no])
-+ $4])
-+elif test $pkg_failed = untried; then
-+ ifelse([$4], , [AC_MSG_FAILURE(dnl
-+[The pkg-config script could not be found or is too old. Make sure it
-+is in your PATH or set the PKG_CONFIG environment variable to the full
-+path to pkg-config.
-+
-+_PKG_TEXT
-+
-+To get pkg-config, see .])],
-+ [$4])
-+else
-+ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
-+ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
-+ AC_MSG_RESULT([yes])
-+ ifelse([$3], , :, [$3])
-+fi[]dnl
-+])# PKG_CHECK_MODULES
-
-Index: csync2-1.34/autogen.sh
-===================================================================
---- csync2-1.34.orig/autogen.sh
-+++ csync2-1.34/autogen.sh
-@@ -18,7 +18,7 @@
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
--aclocal-1.7
-+aclocal-1.7 -I m4
- autoheader
- automake-1.7 --add-missing --copy
- autoconf
-Index: csync2-1.34/config.h.in
-===================================================================
---- csync2-1.34.orig/config.h.in
-+++ csync2-1.34/config.h.in
-@@ -1,7 +1,7 @@
- /* config.h.in. Generated from configure.ac by autoheader. */
-
--/* Define to 1 if you have the `gnutls-openssl' library (-lgnutls-openssl). */
--#undef HAVE_LIBGNUTLS_OPENSSL
-+/* Define to 1 if you have the `gnutls' library (-lgnutls). */
-+#undef HAVE_LIBGNUTLS
-
- /* Define to 1 if you have the `rsync' library (-lrsync). */
- #undef HAVE_LIBRSYNC
-Index: csync2-1.34/configure
-===================================================================
---- csync2-1.34.orig/configure
-+++ csync2-1.34/configure
-@@ -1,11 +1,11 @@
- #! /bin/sh
- # Guess values for system-dependent variables and create Makefiles.
--# Generated by GNU Autoconf 2.61 for csync2 1.34.
-+# Generated by GNU Autoconf 2.63 for csync2 1.34.
- #
- # Report bugs to .
- #
- # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
--# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
- ## --------------------- ##
-@@ -17,7 +17,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
-- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-@@ -39,17 +39,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
- as_cr_digits='0123456789'
- as_cr_alnum=$as_cr_Letters$as_cr_digits
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-+as_nl='
-+'
-+export as_nl
-+# Printing a long string crashes Solaris 7 /usr/bin/printf.
-+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-+ as_echo='printf %s\n'
-+ as_echo_n='printf %s'
-+else
-+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-+ as_echo_n='/usr/ucb/echo -n'
- else
-- PATH_SEPARATOR=:
-+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-+ as_echo_n_body='eval
-+ arg=$1;
-+ case $arg in
-+ *"$as_nl"*)
-+ expr "X$arg" : "X\\(.*\\)$as_nl";
-+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-+ esac;
-+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-+ '
-+ export as_echo_n_body
-+ as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
-- rm -f conf$$.sh
-+ export as_echo_body
-+ as_echo='sh -c $as_echo_body as_echo'
-+fi
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ PATH_SEPARATOR=:
-+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-+ PATH_SEPARATOR=';'
-+ }
- fi
-
- # Support unset when possible.
-@@ -65,8 +93,6 @@ fi
- # there to prevent editors from complaining about space-tab.
- # (If _AS_PATH_WALK were called with IFS unset, it would disable word
- # splitting by setting IFS to empty value.)
--as_nl='
--'
- IFS=" "" $as_nl"
-
- # Find who we are. Look in the path if we contain no directory separator.
-@@ -89,7 +115,7 @@ if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
-- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
- fi
-
-@@ -102,17 +128,10 @@ PS2='> '
- PS4='+ '
-
- # NLS nuisances.
--for as_var in \
-- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-- LC_TELEPHONE LC_TIME
--do
-- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-- eval $as_var=C; export $as_var
-- else
-- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-- fi
--done
-+LC_ALL=C
-+export LC_ALL
-+LANGUAGE=C
-+export LANGUAGE
-
- # Required to use basename.
- if expr a : '\(a\)' >/dev/null 2>&1 &&
-@@ -134,7 +153,7 @@ as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
--echo X/"$0" |
-+$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
-@@ -160,7 +179,7 @@ else
- as_have_required=no
- fi
-
-- if test $as_have_required = yes && (eval ":
-+ if test $as_have_required = yes && (eval ":
- (as_func_return () {
- (exit \$1)
- }
-@@ -242,7 +261,7 @@ IFS=$as_save_IFS
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
-- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-@@ -263,7 +282,7 @@ _ASEOF
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
-- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-@@ -343,10 +362,10 @@ fi
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
-- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-- done
-- export CONFIG_SHELL
-- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-+ done
-+ export CONFIG_SHELL
-+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
- fi
-
-
-@@ -415,9 +434,10 @@ fi
-
- test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
-- echo Please tell autoconf@gnu.org about your system,
-- echo including any error possibly output before this
-- echo message
-+ echo Please tell bug-autoconf@gnu.org about your system,
-+ echo including any error possibly output before this message.
-+ echo This can help us improve future autoconf versions.
-+ echo Configuration will now proceed without shell functions.
- }
-
-
-@@ -453,7 +473,7 @@ test \$exitcode = 0") || {
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
-- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
-@@ -481,7 +501,6 @@ case `echo -n x` in
- *)
- ECHO_N='-n';;
- esac
--
- if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-@@ -494,19 +513,22 @@ if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
- else
- rm -f conf$$.dir
-- mkdir conf$$.dir
-+ mkdir conf$$.dir 2>/dev/null
- fi
--echo >conf$$.file
--if ln -s conf$$.file conf$$ 2>/dev/null; then
-- as_ln_s='ln -s'
-- # ... but there are two gotchas:
-- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-- # In both cases, we have to default to `cp -p'.
-- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+if (echo >conf$$.file) 2>/dev/null; then
-+ if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+ elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+ else
- as_ln_s='cp -p'
--elif ln conf$$.file conf$$ 2>/dev/null; then
-- as_ln_s=ln
-+ fi
- else
- as_ln_s='cp -p'
- fi
-@@ -531,10 +553,10 @@ else
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
-- test -d "$1/.";
-+ test -d "$1/.";
- else
- case $1 in
-- -*)set "./$1";;
-+ -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
-@@ -579,94 +601,105 @@ PACKAGE_STRING='csync2 1.34'
- PACKAGE_BUGREPORT='clifford@clifford.at'
-
- ac_unique_file="csync2.c"
--ac_subst_vars='SHELL
--PATH_SEPARATOR
--PACKAGE_NAME
--PACKAGE_TARNAME
--PACKAGE_VERSION
--PACKAGE_STRING
--PACKAGE_BUGREPORT
--exec_prefix
--prefix
--program_transform_name
--bindir
--sbindir
--libexecdir
--datarootdir
--datadir
--sysconfdir
--sharedstatedir
--localstatedir
--includedir
--oldincludedir
--docdir
--infodir
--htmldir
--dvidir
--pdfdir
--psdir
--libdir
--localedir
--mandir
--DEFS
--ECHO_C
--ECHO_N
--ECHO_T
--LIBS
--build_alias
--host_alias
--target_alias
--INSTALL_PROGRAM
--INSTALL_SCRIPT
--INSTALL_DATA
--CYGPATH_W
--PACKAGE
--VERSION
--ACLOCAL
--AUTOCONF
--AUTOMAKE
--AUTOHEADER
--MAKEINFO
--AMTAR
--install_sh
--STRIP
--INSTALL_STRIP_PROGRAM
--AWK
--SET_MAKE
--am__leading_dot
--CC
--CFLAGS
--LDFLAGS
--CPPFLAGS
--ac_ct_CC
--EXEEXT
--OBJEXT
--DEPDIR
--am__include
--am__quote
--AMDEP_TRUE
--AMDEP_FALSE
--AMDEPBACKSLASH
--CCDEPMODE
--am__fastdepCC_TRUE
--am__fastdepCC_FALSE
--YACC
--YFLAGS
--LEX
--LEX_OUTPUT_ROOT
--LEXLIB
--librsync_source_file
--PRIVATE_LIBRSYNC_TRUE
--PRIVATE_LIBRSYNC_FALSE
--libsqlite_source_file
--PRIVATE_LIBSQLITE_TRUE
--PRIVATE_LIBSQLITE_FALSE
--LIBGNUTLS_CONFIG
--LIBGNUTLS_CFLAGS
--LIBGNUTLS_LIBS
-+ac_subst_vars='LTLIBOBJS
- LIBOBJS
--LTLIBOBJS'
-+HAVE_LIBGNUTLS_FALSE
-+HAVE_LIBGNUTLS_TRUE
-+LIBGNUTLS_LIBS
-+LIBGNUTLS_CFLAGS
-+LIBGNUTLS_CONFIG
-+PKG_CONFIG
-+PRIVATE_LIBSQLITE_FALSE
-+PRIVATE_LIBSQLITE_TRUE
-+libsqlite_source_file
-+PRIVATE_LIBRSYNC_FALSE
-+PRIVATE_LIBRSYNC_TRUE
-+librsync_source_file
-+LEXLIB
-+LEX_OUTPUT_ROOT
-+LEX
-+YFLAGS
-+YACC
-+am__fastdepCC_FALSE
-+am__fastdepCC_TRUE
-+CCDEPMODE
-+AMDEPBACKSLASH
-+AMDEP_FALSE
-+AMDEP_TRUE
-+am__quote
-+am__include
-+DEPDIR
-+OBJEXT
-+EXEEXT
-+ac_ct_CC
-+CPPFLAGS
-+LDFLAGS
-+CFLAGS
-+CC
-+am__leading_dot
-+SET_MAKE
-+AWK
-+INSTALL_STRIP_PROGRAM
-+STRIP
-+install_sh
-+AMTAR
-+MAKEINFO
-+AUTOHEADER
-+AUTOMAKE
-+AUTOCONF
-+ACLOCAL
-+VERSION
-+PACKAGE
-+CYGPATH_W
-+INSTALL_DATA
-+INSTALL_SCRIPT
-+INSTALL_PROGRAM
-+target_alias
-+host_alias
-+build_alias
-+LIBS
-+ECHO_T
-+ECHO_N
-+ECHO_C
-+DEFS
-+mandir
-+localedir
-+libdir
-+psdir
-+pdfdir
-+dvidir
-+htmldir
-+infodir
-+docdir
-+oldincludedir
-+includedir
-+localstatedir
-+sharedstatedir
-+sysconfdir
-+datadir
-+datarootdir
-+libexecdir
-+sbindir
-+bindir
-+program_transform_name
-+prefix
-+exec_prefix
-+PACKAGE_BUGREPORT
-+PACKAGE_STRING
-+PACKAGE_VERSION
-+PACKAGE_TARNAME
-+PACKAGE_NAME
-+PATH_SEPARATOR
-+SHELL'
- ac_subst_files=''
-+ac_user_opts='
-+enable_option_checking
-+enable_dependency_tracking
-+with_librsync_source
-+with_libsqlite_source
-+enable_gnutls
-+with_libgnutls_prefix
-+'
- ac_precious_vars='build_alias
- host_alias
- target_alias
-@@ -676,12 +709,15 @@ LDFLAGS
- LIBS
- CPPFLAGS
- YACC
--YFLAGS'
-+YFLAGS
-+PKG_CONFIG'
-
-
- # Initialize some variables set by options.
- ac_init_help=
- ac_init_version=false
-+ac_unrecognized_opts=
-+ac_unrecognized_sep=
- # The variables have the same names as the options, with
- # dashes changed to underlines.
- cache_file=/dev/null
-@@ -780,13 +816,21 @@ do
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
-- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-- eval enable_$ac_feature=no ;;
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"enable_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
-+ esac
-+ eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
-@@ -799,13 +843,21 @@ do
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
-- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
-- ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-- eval enable_$ac_feature=\$ac_optarg ;;
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"enable_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
-+ esac
-+ eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-@@ -996,22 +1048,38 @@ do
- ac_init_version=: ;;
-
- -with-* | --with-*)
-- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-- eval with_$ac_package=\$ac_optarg ;;
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"with_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
-+ esac
-+ eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
-- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
-- expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid package name: $ac_package" >&2
-+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
-- ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-- eval with_$ac_package=no ;;
-+ ac_useropt_orig=$ac_useropt
-+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
-+ case $ac_user_opts in
-+ *"
-+"with_$ac_useropt"
-+"*) ;;
-+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
-+ ac_unrecognized_sep=', ';;
-+ esac
-+ eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
-@@ -1031,7 +1099,7 @@ do
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
-- -*) { echo "$as_me: error: unrecognized option: $ac_option
-+ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
- Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-@@ -1040,16 +1108,16 @@ Try \`$0 --help' for more information."
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-+ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
-- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
-@@ -1058,22 +1126,38 @@ done
-
- if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-- { echo "$as_me: error: missing argument to $ac_option" >&2
-+ { $as_echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
- fi
-
--# Be sure to have absolute directory names.
-+if test -n "$ac_unrecognized_opts"; then
-+ case $enable_option_checking in
-+ no) ;;
-+ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
-+ { (exit 1); exit 1; }; } ;;
-+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
-+ esac
-+fi
-+
-+# Check all directory arguments for consistency.
- for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
- do
- eval ac_val=\$$ac_var
-+ # Remove trailing slashes.
-+ case $ac_val in
-+ */ )
-+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
-+ eval $ac_var=\$ac_val;;
-+ esac
-+ # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
-- { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-+ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
- done
-
-@@ -1088,7 +1172,7 @@ target=$target_alias
- if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
-- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
-@@ -1104,10 +1188,10 @@ test "$silent" = yes && exec 6>/dev/null
- ac_pwd=`pwd` && test -n "$ac_pwd" &&
- ac_ls_di=`ls -di .` &&
- ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-- { echo "$as_me: error: Working directory cannot be determined" >&2
-+ { $as_echo "$as_me: error: working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
- test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-- { echo "$as_me: error: pwd does not report name of working directory" >&2
-+ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
-
-
-@@ -1115,12 +1199,12 @@ test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
-- ac_confdir=`$as_dirname -- "$0" ||
--$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X"$0" : 'X\(//\)[^/]' \| \
-- X"$0" : 'X\(//\)$' \| \
-- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
--echo X"$0" |
-+ ac_confdir=`$as_dirname -- "$as_myself" ||
-+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$as_myself" : 'X\(//\)[^/]' \| \
-+ X"$as_myself" : 'X\(//\)$' \| \
-+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
-@@ -1147,12 +1231,12 @@ else
- fi
- if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-+ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
- fi
- ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
- ac_abs_confdir=`(
-- cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-+ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
- pwd)`
- # When building in place, set srcdir=.
-@@ -1201,9 +1285,9 @@ Configuration:
-
- Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
-- [$ac_default_prefix]
-+ [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
-- [PREFIX]
-+ [PREFIX]
-
- By default, \`make install' will install all the files in
- \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-@@ -1213,25 +1297,25 @@ for instance \`--prefix=\$HOME'.
- For better control, use the options below.
-
- Fine tuning of the installation directories:
-- --bindir=DIR user executables [EPREFIX/bin]
-- --sbindir=DIR system admin executables [EPREFIX/sbin]
-- --libexecdir=DIR program executables [EPREFIX/libexec]
-- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-- --libdir=DIR object code libraries [EPREFIX/lib]
-- --includedir=DIR C header files [PREFIX/include]
-- --oldincludedir=DIR C header files for non-gcc [/usr/include]
-- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-- --infodir=DIR info documentation [DATAROOTDIR/info]
-- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-- --mandir=DIR man documentation [DATAROOTDIR/man]
-- --docdir=DIR documentation root [DATAROOTDIR/doc/csync2]
-- --htmldir=DIR html documentation [DOCDIR]
-- --dvidir=DIR dvi documentation [DOCDIR]
-- --pdfdir=DIR pdf documentation [DOCDIR]
-- --psdir=DIR ps documentation [DOCDIR]
-+ --bindir=DIR user executables [EPREFIX/bin]
-+ --sbindir=DIR system admin executables [EPREFIX/sbin]
-+ --libexecdir=DIR program executables [EPREFIX/libexec]
-+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
-+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
-+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
-+ --libdir=DIR object code libraries [EPREFIX/lib]
-+ --includedir=DIR C header files [PREFIX/include]
-+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
-+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
-+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
-+ --infodir=DIR info documentation [DATAROOTDIR/info]
-+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
-+ --mandir=DIR man documentation [DATAROOTDIR/man]
-+ --docdir=DIR documentation root [DATAROOTDIR/doc/csync2]
-+ --htmldir=DIR html documentation [DOCDIR]
-+ --dvidir=DIR dvi documentation [DOCDIR]
-+ --pdfdir=DIR pdf documentation [DOCDIR]
-+ --psdir=DIR ps documentation [DOCDIR]
- _ACEOF
-
- cat <<\_ACEOF
-@@ -1250,6 +1334,7 @@ if test -n "$ac_init_help"; then
- cat <<\_ACEOF
-
- Optional Features:
-+ --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking Speeds up one-time builds
-@@ -1280,6 +1365,7 @@ Some influential environment variables:
- YFLAGS The list of arguments that will be passed by default to $YACC.
- This script will default YFLAGS to the empty string to avoid a
- default value of `-d' given by some make applications.
-+ PKG_CONFIG path to pkg-config utility
-
- Use these variables to override the choices made by `configure' or to help
- it to find libraries and programs with nonstandard names/locations.
-@@ -1292,15 +1378,17 @@ fi
- if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-- test -d "$ac_dir" || continue
-+ test -d "$ac_dir" ||
-+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
-+ continue
- ac_builddir=.
-
- case "$ac_dir" in
- .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *)
-- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
-- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-@@ -1336,7 +1424,7 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
-- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-@@ -1346,10 +1434,10 @@ test -n "$ac_init_help" && exit $ac_stat
- if $ac_init_version; then
- cat <<\_ACEOF
- csync2 configure 1.34
--generated by GNU Autoconf 2.61
-+generated by GNU Autoconf 2.63
-
- Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
--2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
- This configure script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it.
- _ACEOF
-@@ -1360,7 +1448,7 @@ This file contains any messages produced
- running configure, to aid debugging if configure makes a mistake.
-
- It was created by csync2 $as_me 1.34, which was
--generated by GNU Autoconf 2.61. Invocation command line was
-+generated by GNU Autoconf 2.63. Invocation command line was
-
- $ $0 $@
-
-@@ -1396,7 +1484,7 @@ for as_dir in $PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
-- echo "PATH: $as_dir"
-+ $as_echo "PATH: $as_dir"
- done
- IFS=$as_save_IFS
-
-@@ -1431,7 +1519,7 @@ do
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
-- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-@@ -1483,11 +1571,12 @@ _ASBOX
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
-- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
--echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
-+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
-@@ -1517,9 +1606,9 @@ _ASBOX
- do
- eval ac_val=\$$ac_var
- case $ac_val in
-- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
-- echo "$ac_var='\''$ac_val'\''"
-+ $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
-@@ -1534,9 +1623,9 @@ _ASBOX
- do
- eval ac_val=\$$ac_var
- case $ac_val in
-- *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
-- echo "$ac_var='\''$ac_val'\''"
-+ $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-@@ -1552,8 +1641,8 @@ _ASBOX
- echo
- fi
- test "$ac_signal" != 0 &&
-- echo "$as_me: caught signal $ac_signal"
-- echo "$as_me: exit $exit_status"
-+ $as_echo "$as_me: caught signal $ac_signal"
-+ $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-@@ -1595,21 +1684,24 @@ _ACEOF
-
-
- # Let the site file select an alternate cache file if it wants to.
--# Prefer explicitly selected file to automatically selected ones.
-+# Prefer an explicitly selected file to automatically selected ones.
-+ac_site_file1=NONE
-+ac_site_file2=NONE
- if test -n "$CONFIG_SITE"; then
-- set x "$CONFIG_SITE"
-+ ac_site_file1=$CONFIG_SITE
- elif test "x$prefix" != xNONE; then
-- set x "$prefix/share/config.site" "$prefix/etc/config.site"
-+ ac_site_file1=$prefix/share/config.site
-+ ac_site_file2=$prefix/etc/config.site
- else
-- set x "$ac_default_prefix/share/config.site" \
-- "$ac_default_prefix/etc/config.site"
-+ ac_site_file1=$ac_default_prefix/share/config.site
-+ ac_site_file2=$ac_default_prefix/etc/config.site
- fi
--shift
--for ac_site_file
-+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
- do
-+ test "x$ac_site_file" = xNONE && continue
- if test -r "$ac_site_file"; then
-- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
--echo "$as_me: loading site script $ac_site_file" >&6;}
-+ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-@@ -1619,16 +1711,16 @@ if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
-- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
--echo "$as_me: loading cache $cache_file" >&6;}
-+ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
-+$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
- else
-- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
--echo "$as_me: creating cache $cache_file" >&6;}
-+ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
-+$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
- fi
-
-@@ -1642,29 +1734,38 @@ for ac_var in $ac_precious_vars; do
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
-- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
--echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
-- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
--echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
-- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
--echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
--echo "$as_me: former value: $ac_old_val" >&2;}
-- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
--echo "$as_me: current value: $ac_new_val" >&2;}
-- ac_cache_corrupted=:
-+ # differences in whitespace do not lead to failure.
-+ ac_old_val_w=`echo x $ac_old_val`
-+ ac_new_val_w=`echo x $ac_new_val`
-+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
-+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-+ ac_cache_corrupted=:
-+ else
-+ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-+ eval $ac_var=\$ac_old_val
-+ fi
-+ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
-+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
-+ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
-+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
-- *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
-@@ -1674,10 +1775,12 @@ echo "$as_me: current value: $ac_new_v
- fi
- done
- if $ac_cache_corrupted; then
-- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
--echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
--echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-+ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
-@@ -1730,8 +1833,8 @@ for ac_dir in "$srcdir" "$srcdir/.." "$s
- fi
- done
- if test -z "$ac_aux_dir"; then
-- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
--echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
-@@ -1757,11 +1860,12 @@ ac_configure="$SHELL $ac_aux_dir/configu
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
--{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
--echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+# Reject install programs that cannot install multiple files.
-+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+$as_echo_n "checking for a BSD-compatible install... " >&6; }
- if test -z "$INSTALL"; then
- if test "${ac_cv_path_install+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
-@@ -1790,17 +1894,29 @@ case $as_dir/ in
- # program-specific install script used by HP pwplus--don't use.
- :
- else
-- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-- break 3
-+ rm -rf conftest.one conftest.two conftest.dir
-+ echo one > conftest.one
-+ echo two > conftest.two
-+ mkdir conftest.dir
-+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-+ test -s conftest.one && test -s conftest.two &&
-+ test -s conftest.dir/conftest.one &&
-+ test -s conftest.dir/conftest.two
-+ then
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
- fi
- fi
- done
- done
- ;;
- esac
-+
- done
- IFS=$as_save_IFS
-
-+rm -rf conftest.one conftest.two conftest.dir
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-@@ -1813,8 +1929,8 @@ fi
- INSTALL=$ac_install_sh
- fi
- fi
--{ echo "$as_me:$LINENO: result: $INSTALL" >&5
--echo "${ECHO_T}$INSTALL" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-+$as_echo "$INSTALL" >&6; }
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
-@@ -1824,8 +1940,8 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR
-
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
--{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
--echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-+$as_echo_n "checking whether build environment is sane... " >&6; }
- # Just in case
- sleep 1
- echo timestamp > conftest.file
-@@ -1848,9 +1964,9 @@ if (
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
-- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-+ { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
- alias in your environment" >&5
--echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-+$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
- alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-@@ -1861,26 +1977,23 @@ then
- # Ok.
- :
- else
-- { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-+ { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
- Check your system clock" >&5
--echo "$as_me: error: newly created file is older than distributed files!
-+$as_echo "$as_me: error: newly created file is older than distributed files!
- Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
- fi
--{ echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: yes" >&5
-+$as_echo "yes" >&6; }
- test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
- # Use a double $ so make ignores it.
- test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
--# Double any \ or $. echo might interpret backslashes.
-+# Double any \ or $.
- # By default was `s,x,x', remove it if useless.
--cat <<\_ACEOF >conftest.sed
--s/[\\$]/&&/g;s/;s,x,x,$//
--_ACEOF
--program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
--rm -f conftest.sed
-+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-
- # expand $ac_aux_dir to an absolute path
-@@ -1892,18 +2005,18 @@ if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
- else
- am_missing_run=
-- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
--echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-+ { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
-+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
- fi
-
- for ac_prog in gawk mawk nawk awk
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_AWK+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-@@ -1916,7 +2029,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -1927,22 +2040,23 @@ fi
- fi
- AWK=$ac_cv_prog_AWK
- if test -n "$AWK"; then
-- { echo "$as_me:$LINENO: result: $AWK" >&5
--echo "${ECHO_T}$AWK" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $AWK" >&5
-+$as_echo "$AWK" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
- test -n "$AWK" && break
- done
-
--{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
--echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
--set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-+set x ${MAKE-make}
-+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
- if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- cat >conftest.make <<\_ACEOF
- SHELL = /bin/sh
-@@ -1959,12 +2073,12 @@ esac
- rm -f conftest.make
- fi
- if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-- { echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: yes" >&5
-+$as_echo "yes" >&6; }
- SET_MAKE=
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
- fi
-
-@@ -1980,8 +2094,8 @@ rmdir .tst 2>/dev/null
- # test to see if srcdir already configured
- if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
-- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
--echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
-@@ -2038,10 +2152,10 @@ if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
- set dummy ${ac_tool_prefix}strip; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_STRIP+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-@@ -2054,7 +2168,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2065,11 +2179,11 @@ fi
- fi
- STRIP=$ac_cv_prog_STRIP
- if test -n "$STRIP"; then
-- { echo "$as_me:$LINENO: result: $STRIP" >&5
--echo "${ECHO_T}$STRIP" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-+$as_echo "$STRIP" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -2078,10 +2192,10 @@ if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
- set dummy strip; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-@@ -2094,7 +2208,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2105,11 +2219,11 @@ fi
- fi
- ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
- if test -n "$ac_ct_STRIP"; then
-- { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
--echo "${ECHO_T}$ac_ct_STRIP" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-+$as_echo "$ac_ct_STRIP" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
- if test "x$ac_ct_STRIP" = x; then
-@@ -2117,12 +2231,8 @@ fi
- else
- case $cross_compiling:$ac_tool_warned in
- yes:)
--{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
--whose name does not start with the host triplet. If you think this
--configuration is useful to you, please write to autoconf@gnu.org." >&5
--echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
--whose name does not start with the host triplet. If you think this
--configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
- STRIP=$ac_ct_STRIP
-@@ -2157,10 +2267,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -2173,7 +2283,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2184,11 +2294,11 @@ fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- { echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -2197,10 +2307,10 @@ if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-@@ -2213,7 +2323,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2224,11 +2334,11 @@ fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+$as_echo "$ac_ct_CC" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
- if test "x$ac_ct_CC" = x; then
-@@ -2236,12 +2346,8 @@ fi
- else
- case $cross_compiling:$ac_tool_warned in
- yes:)
--{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
--whose name does not start with the host triplet. If you think this
--configuration is useful to you, please write to autoconf@gnu.org." >&5
--echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
--whose name does not start with the host triplet. If you think this
--configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
- CC=$ac_ct_CC
-@@ -2254,10 +2360,10 @@ if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -2270,7 +2376,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2281,11 +2387,11 @@ fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- { echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -2294,10 +2400,10 @@ fi
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -2315,7 +2421,7 @@ do
- continue
- fi
- ac_cv_prog_CC="cc"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2338,11 +2444,11 @@ fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- { echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -2353,10 +2459,10 @@ if test -z "$CC"; then
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-@@ -2369,7 +2475,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2380,11 +2486,11 @@ fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-- { echo "$as_me:$LINENO: result: $CC" >&5
--echo "${ECHO_T}$CC" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $CC" >&5
-+$as_echo "$CC" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -2397,10 +2503,10 @@ if test -z "$CC"; then
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-@@ -2413,7 +2519,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -2424,11 +2530,11 @@ fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-- { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
--echo "${ECHO_T}$ac_ct_CC" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-+$as_echo "$ac_ct_CC" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -2440,12 +2546,8 @@ done
- else
- case $cross_compiling:$ac_tool_warned in
- yes:)
--{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
--whose name does not start with the host triplet. If you think this
--configuration is useful to you, please write to autoconf@gnu.org." >&5
--echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
--whose name does not start with the host triplet. If you think this
--configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
- CC=$ac_ct_CC
-@@ -2455,44 +2557,50 @@ fi
- fi
-
-
--test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-+test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
- See \`config.log' for more details." >&5
--echo "$as_me: error: no acceptable C compiler found in \$PATH
-+$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
- See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-+ { (exit 1); exit 1; }; }; }
-
- # Provide some information about the compiler.
--echo "$as_me:$LINENO: checking for C compiler version" >&5
--ac_compiler=`set X $ac_compile; echo $2`
-+$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
-+set X $ac_compile
-+ac_compiler=$2
- { (ac_try="$ac_compiler --version >&5"
- case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- { (ac_try="$ac_compiler -v >&5"
- case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- { (ac_try="$ac_compiler -V >&5"
- case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
- cat >conftest.$ac_ext <<_ACEOF
-@@ -2511,27 +2619,22 @@ main ()
- }
- _ACEOF
- ac_clean_files_save=$ac_clean_files
--ac_clean_files="$ac_clean_files a.out a.exe b.out"
-+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
- # Try to create an executable without -o first, disregard a.out.
- # It will help us diagnose broken compilers, and finding out an intuition
- # of exeext.
--{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
--echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
--ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
--#
--# List of possible output files, starting from the most likely.
--# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
--# only as a last resort. b.out is created by i960 compilers.
--ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
--#
--# The IRIX 6 linker writes into existing files which may not be
--# executable, retaining their permissions. Remove them first so a
--# subsequent execution test works.
-+{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-+$as_echo_n "checking for C compiler default output file name... " >&6; }
-+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-+
-+# The possible output files:
-+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-+
- ac_rmfiles=
- for ac_file in $ac_files
- do
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
- done
-@@ -2542,10 +2645,11 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
- # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-@@ -2556,7 +2660,7 @@ for ac_file in $ac_files ''
- do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
-@@ -2583,25 +2687,27 @@ else
- ac_file=''
- fi
-
--{ echo "$as_me:$LINENO: result: $ac_file" >&5
--echo "${ECHO_T}$ac_file" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
-+$as_echo "$ac_file" >&6; }
- if test -z "$ac_file"; then
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
- See \`config.log' for more details." >&5
--echo "$as_me: error: C compiler cannot create executables
-+$as_echo "$as_me: error: C compiler cannot create executables
- See \`config.log' for more details." >&2;}
-- { (exit 77); exit 77; }; }
-+ { (exit 77); exit 77; }; }; }
- fi
-
- ac_exeext=$ac_cv_exeext
-
- # Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
--echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-+$as_echo_n "checking whether the C compiler works... " >&6; }
- # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
- # If not cross compiling, check that we can run a simple program.
- if test "$cross_compiling" != yes; then
-@@ -2610,49 +2716,53 @@ if test "$cross_compiling" != yes; then
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
-- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
- If you meant to cross compile, use \`--host'.
- See \`config.log' for more details." >&5
--echo "$as_me: error: cannot run C compiled programs.
-+$as_echo "$as_me: error: cannot run C compiled programs.
- If you meant to cross compile, use \`--host'.
- See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-+ { (exit 1); exit 1; }; }; }
- fi
- fi
- fi
--{ echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: yes" >&5
-+$as_echo "yes" >&6; }
-
--rm -f a.out a.exe conftest$ac_cv_exeext b.out
-+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
- ac_clean_files=$ac_clean_files_save
- # Check that the compiler produces executables we can run. If not, either
- # the compiler is broken, or we cross compile.
--{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
--echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
--{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
--echo "${ECHO_T}$cross_compiling" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-+$as_echo_n "checking whether we are cross compiling... " >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
-+$as_echo "$cross_compiling" >&6; }
-
--{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
--echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
-+$as_echo_n "checking for suffix of executables... " >&6; }
- if { (ac_try="$ac_link"
- case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
- # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-@@ -2661,31 +2771,33 @@ eval "echo \"\$as_me:$LINENO: $ac_try_ec
- for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
- done
- else
-- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-+ { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
- See \`config.log' for more details." >&5
--echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-+$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
- See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-+ { (exit 1); exit 1; }; }; }
- fi
-
- rm -f conftest$ac_cv_exeext
--{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
--echo "${ECHO_T}$ac_cv_exeext" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-+$as_echo "$ac_cv_exeext" >&6; }
-
- rm -f conftest.$ac_ext
- EXEEXT=$ac_cv_exeext
- ac_exeext=$EXEEXT
--{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
--echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
-+$as_echo_n "checking for suffix of object files... " >&6; }
- if test "${ac_cv_objext+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2708,40 +2820,43 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
-- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
-+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
- done
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
--{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-+{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-+{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
- See \`config.log' for more details." >&5
--echo "$as_me: error: cannot compute suffix of object files: cannot compile
-+$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
- See \`config.log' for more details." >&2;}
-- { (exit 1); exit 1; }; }
-+ { (exit 1); exit 1; }; }; }
- fi
-
- rm -f conftest.$ac_cv_objext conftest.$ac_ext
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
--echo "${ECHO_T}$ac_cv_objext" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-+$as_echo "$ac_cv_objext" >&6; }
- OBJEXT=$ac_cv_objext
- ac_objext=$OBJEXT
--{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
--echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
- if test "${ac_cv_c_compiler_gnu+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- cat >conftest.$ac_ext <<_ACEOF
- /* confdefs.h. */
-@@ -2767,20 +2882,21 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
-@@ -2790,15 +2906,19 @@ rm -f core conftest.err conftest.$ac_obj
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
--echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
--GCC=`test $ac_compiler_gnu = yes && echo yes`
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-+if test $ac_compiler_gnu = yes; then
-+ GCC=yes
-+else
-+ GCC=
-+fi
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
--{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
--echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-+$as_echo_n "checking whether $CC accepts -g... " >&6; }
- if test "${ac_cv_prog_cc_g+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
-@@ -2825,20 +2945,21 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
-@@ -2863,20 +2984,21 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
-@@ -2902,20 +3024,21 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-
-@@ -2930,8 +3053,8 @@ fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-+$as_echo "$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
-@@ -2947,10 +3070,10 @@ else
- CFLAGS=
- fi
- fi
--{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
--echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
-+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
- if test "${ac_cv_prog_cc_c89+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
-@@ -3021,20 +3144,21 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_c89=$ac_arg
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-
-@@ -3050,15 +3174,15 @@ fi
- # AC_CACHE_VAL
- case "x$ac_cv_prog_cc_c89" in
- x)
-- { echo "$as_me:$LINENO: result: none needed" >&5
--echo "${ECHO_T}none needed" >&6; } ;;
-+ { $as_echo "$as_me:$LINENO: result: none needed" >&5
-+$as_echo "none needed" >&6; } ;;
- xno)
-- { echo "$as_me:$LINENO: result: unsupported" >&5
--echo "${ECHO_T}unsupported" >&6; } ;;
-+ { $as_echo "$as_me:$LINENO: result: unsupported" >&5
-+$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
-- { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
--echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
-+ { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
-+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
- esac
-
-
-@@ -3079,8 +3203,8 @@ am__doit:
- .PHONY: am__doit
- END
- # If we don't find an include directive, just comment out the code.
--{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
--echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-+$as_echo_n "checking for style of include used by $am_make... " >&6; }
- am__include="#"
- am__quote=
- _am_result=none
-@@ -3107,8 +3231,8 @@ if test "$am__include" = "#"; then
- fi
-
-
--{ echo "$as_me:$LINENO: result: $_am_result" >&5
--echo "${ECHO_T}$_am_result" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
-+$as_echo "$_am_result" >&6; }
- rm -f confinc confmf
-
- # Check whether --enable-dependency-tracking was given.
-@@ -3135,10 +3259,10 @@ fi
-
- depcc="$CC" am_compiler_list=
-
--{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
--echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-+$as_echo_n "checking dependency style of $depcc... " >&6; }
- if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
-@@ -3218,8 +3342,8 @@ else
- fi
-
- fi
--{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
--echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
- CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-@@ -3248,11 +3372,12 @@ fi
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
--{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
--echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-+# Reject install programs that cannot install multiple files.
-+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-+$as_echo_n "checking for a BSD-compatible install... " >&6; }
- if test -z "$INSTALL"; then
- if test "${ac_cv_path_install+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
-@@ -3281,17 +3406,29 @@ case $as_dir/ in
- # program-specific install script used by HP pwplus--don't use.
- :
- else
-- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-- break 3
-+ rm -rf conftest.one conftest.two conftest.dir
-+ echo one > conftest.one
-+ echo two > conftest.two
-+ mkdir conftest.dir
-+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-+ test -s conftest.one && test -s conftest.two &&
-+ test -s conftest.dir/conftest.one &&
-+ test -s conftest.dir/conftest.two
-+ then
-+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-+ break 3
-+ fi
- fi
- fi
- done
- done
- ;;
- esac
-+
- done
- IFS=$as_save_IFS
-
-+rm -rf conftest.one conftest.two conftest.dir
-
- fi
- if test "${ac_cv_path_install+set}" = set; then
-@@ -3304,8 +3441,8 @@ fi
- INSTALL=$ac_install_sh
- fi
- fi
--{ echo "$as_me:$LINENO: result: $INSTALL" >&5
--echo "${ECHO_T}$INSTALL" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-+$as_echo "$INSTALL" >&6; }
-
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
-@@ -3319,10 +3456,10 @@ for ac_prog in 'bison -y' byacc
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_YACC+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$YACC"; then
- ac_cv_prog_YACC="$YACC" # Let the user override the test.
-@@ -3335,7 +3472,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_YACC="$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -3346,11 +3483,11 @@ fi
- fi
- YACC=$ac_cv_prog_YACC
- if test -n "$YACC"; then
-- { echo "$as_me:$LINENO: result: $YACC" >&5
--echo "${ECHO_T}$YACC" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $YACC" >&5
-+$as_echo "$YACC" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -3363,10 +3500,10 @@ for ac_prog in flex lex
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_LEX+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
-@@ -3379,7 +3516,7 @@ do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LEX="$ac_prog"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
-@@ -3390,11 +3527,11 @@ fi
- fi
- LEX=$ac_cv_prog_LEX
- if test -n "$LEX"; then
-- { echo "$as_me:$LINENO: result: $LEX" >&5
--echo "${ECHO_T}$LEX" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $LEX" >&5
-+$as_echo "$LEX" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-@@ -3427,15 +3564,16 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$LEX conftest.l") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
--{ echo "$as_me:$LINENO: checking lex output file root" >&5
--echo $ECHO_N "checking lex output file root... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking lex output file root" >&5
-+$as_echo_n "checking lex output file root... " >&6; }
- if test "${ac_cv_prog_lex_root+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
-
- if test -f lex.yy.c; then
-@@ -3443,20 +3581,20 @@ if test -f lex.yy.c; then
- elif test -f lexyy.c; then
- ac_cv_prog_lex_root=lexyy
- else
-- { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5
--echo "$as_me: error: cannot find output from $LEX; giving up" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5
-+$as_echo "$as_me: error: cannot find output from $LEX; giving up" >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5
--echo "${ECHO_T}$ac_cv_prog_lex_root" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5
-+$as_echo "$ac_cv_prog_lex_root" >&6; }
- LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
-
- if test -z "${LEXLIB+set}"; then
-- { echo "$as_me:$LINENO: checking lex library" >&5
--echo $ECHO_N "checking lex library... $ECHO_C" >&6; }
-+ { $as_echo "$as_me:$LINENO: checking lex library" >&5
-+$as_echo_n "checking lex library... " >&6; }
- if test "${ac_cv_lib_lex+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
-
- ac_save_LIBS=$LIBS
-@@ -3472,26 +3610,30 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-- } && test -s conftest$ac_exeext &&
-- $as_test_x conftest$ac_exeext; then
-+ } && test -s conftest$ac_exeext && {
-+ test "$cross_compiling" = yes ||
-+ $as_test_x conftest$ac_exeext
-+ }; then
- ac_cv_lib_lex=$ac_lib
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-
- fi
-
-+rm -rf conftest.dSYM
- rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- test "$ac_cv_lib_lex" != 'none needed' && break
-@@ -3499,16 +3641,16 @@ rm -f core conftest.err conftest.$ac_obj
- LIBS=$ac_save_LIBS
-
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_lib_lex" >&5
--echo "${ECHO_T}$ac_cv_lib_lex" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_lex" >&5
-+$as_echo "$ac_cv_lib_lex" >&6; }
- test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex
- fi
-
-
--{ echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5
--echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5
-+$as_echo_n "checking whether yytext is a pointer... " >&6; }
- if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- # POSIX says lex can declare yytext either as a pointer or an array; the
- # default is implementation-dependent. Figure out which it is, since
-@@ -3526,33 +3668,37 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-- } && test -s conftest$ac_exeext &&
-- $as_test_x conftest$ac_exeext; then
-+ } && test -s conftest$ac_exeext && {
-+ test "$cross_compiling" = yes ||
-+ $as_test_x conftest$ac_exeext
-+ }; then
- ac_cv_prog_lex_yytext_pointer=yes
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
-
- fi
-
-+rm -rf conftest.dSYM
- rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_save_LIBS
-
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5
--echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6; }
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5
-+$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; }
- if test $ac_cv_prog_lex_yytext_pointer = yes; then
-
- cat >>confdefs.h <<\_ACEOF
-@@ -3575,10 +3721,10 @@ if test "${with_librsync_source+set}" =
-
- else
-
--{ echo "$as_me:$LINENO: checking for rs_sig_file in -lrsync" >&5
--echo $ECHO_N "checking for rs_sig_file in -lrsync... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for rs_sig_file in -lrsync" >&5
-+$as_echo_n "checking for rs_sig_file in -lrsync... " >&6; }
- if test "${ac_cv_lib_rsync_rs_sig_file+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lrsync $LIBS"
-@@ -3610,33 +3756,37 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-- } && test -s conftest$ac_exeext &&
-- $as_test_x conftest$ac_exeext; then
-+ } && test -s conftest$ac_exeext && {
-+ test "$cross_compiling" = yes ||
-+ $as_test_x conftest$ac_exeext
-+ }; then
- ac_cv_lib_rsync_rs_sig_file=yes
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_rsync_rs_sig_file=no
- fi
-
-+rm -rf conftest.dSYM
- rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_lib_rsync_rs_sig_file" >&5
--echo "${ECHO_T}$ac_cv_lib_rsync_rs_sig_file" >&6; }
--if test $ac_cv_lib_rsync_rs_sig_file = yes; then
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_rsync_rs_sig_file" >&5
-+$as_echo "$ac_cv_lib_rsync_rs_sig_file" >&6; }
-+if test "x$ac_cv_lib_rsync_rs_sig_file" = x""yes; then
- cat >>confdefs.h <<_ACEOF
- #define HAVE_LIBRSYNC 1
- _ACEOF
-@@ -3644,8 +3794,8 @@ _ACEOF
- LIBS="-lrsync $LIBS"
-
- else
-- { { echo "$as_me:$LINENO: error: librsync is required" >&5
--echo "$as_me: error: librsync is required" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: librsync is required" >&5
-+$as_echo "$as_me: error: librsync is required" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
-@@ -3671,10 +3821,10 @@ if test "${with_libsqlite_source+set}" =
-
- else
-
--{ echo "$as_me:$LINENO: checking for sqlite_exec in -lsqlite" >&5
--echo $ECHO_N "checking for sqlite_exec in -lsqlite... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for sqlite_exec in -lsqlite" >&5
-+$as_echo_n "checking for sqlite_exec in -lsqlite... " >&6; }
- if test "${ac_cv_lib_sqlite_sqlite_exec+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- ac_check_lib_save_LIBS=$LIBS
- LIBS="-lsqlite $LIBS"
-@@ -3706,33 +3856,37 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-- } && test -s conftest$ac_exeext &&
-- $as_test_x conftest$ac_exeext; then
-+ } && test -s conftest$ac_exeext && {
-+ test "$cross_compiling" = yes ||
-+ $as_test_x conftest$ac_exeext
-+ }; then
- ac_cv_lib_sqlite_sqlite_exec=yes
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_sqlite_sqlite_exec=no
- fi
-
-+rm -rf conftest.dSYM
- rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_lib_sqlite_sqlite_exec" >&5
--echo "${ECHO_T}$ac_cv_lib_sqlite_sqlite_exec" >&6; }
--if test $ac_cv_lib_sqlite_sqlite_exec = yes; then
-+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_sqlite_sqlite_exec" >&5
-+$as_echo "$ac_cv_lib_sqlite_sqlite_exec" >&6; }
-+if test "x$ac_cv_lib_sqlite_sqlite_exec" = x""yes; then
- cat >>confdefs.h <<_ACEOF
- #define HAVE_LIBSQLITE 1
- _ACEOF
-@@ -3740,8 +3894,8 @@ _ACEOF
- LIBS="-lsqlite $LIBS"
-
- else
-- { { echo "$as_me:$LINENO: error: libsqlite is required" >&5
--echo "$as_me: error: libsqlite is required" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: libsqlite is required" >&5
-+$as_echo "$as_me: error: libsqlite is required" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
-@@ -3769,9 +3923,124 @@ fi
-
- if test "$enable_gnutls" != no
- then
--
- # Check for gnuTLS.
-
-+
-+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
-+ if test -n "$ac_tool_prefix"; then
-+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
-+ $as_echo_n "(cached) " >&6
-+else
-+ case $PKG_CONFIG in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+fi
-+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-+if test -n "$PKG_CONFIG"; then
-+ { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-+$as_echo "$PKG_CONFIG" >&6; }
-+else
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+
-+fi
-+if test -z "$ac_cv_path_PKG_CONFIG"; then
-+ ac_pt_PKG_CONFIG=$PKG_CONFIG
-+ # Extract the first word of "pkg-config", so it can be a program name with args.
-+set dummy pkg-config; ac_word=$2
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
-+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
-+ $as_echo_n "(cached) " >&6
-+else
-+ case $ac_pt_PKG_CONFIG in
-+ [\\/]* | ?:[\\/]*)
-+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
-+ ;;
-+ *)
-+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-+for as_dir in $PATH
-+do
-+ IFS=$as_save_IFS
-+ test -z "$as_dir" && as_dir=.
-+ for ac_exec_ext in '' $ac_executable_extensions; do
-+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ break 2
-+ fi
-+done
-+done
-+IFS=$as_save_IFS
-+
-+ ;;
-+esac
-+fi
-+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-+if test -n "$ac_pt_PKG_CONFIG"; then
-+ { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
-+else
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
-+fi
-+
-+ if test "x$ac_pt_PKG_CONFIG" = x; then
-+ PKG_CONFIG=""
-+ else
-+ case $cross_compiling:$ac_tool_warned in
-+yes:)
-+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-+ac_tool_warned=yes ;;
-+esac
-+ PKG_CONFIG=$ac_pt_PKG_CONFIG
-+ fi
-+else
-+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
-+fi
-+
-+fi
-+if test -n "$PKG_CONFIG"; then
-+ _pkg_min_version=0.9.0
-+ { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
-+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-+ { $as_echo "$as_me:$LINENO: result: yes" >&5
-+$as_echo "yes" >&6; }
-+ else
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
-+ PKG_CONFIG=""
-+ fi
-+
-+fi
-+
- # Check whether --with-libgnutls-prefix was given.
- if test "${with_libgnutls_prefix+set}" = set; then
- withval=$with_libgnutls_prefix; libgnutls_config_prefix="$withval"
-@@ -3780,18 +4049,29 @@ else
- fi
-
-
-- if test x$libgnutls_config_prefix != x ; then
-- if test x${LIBGNUTLS_CONFIG+set} != xset ; then
-- LIBGNUTLS_CONFIG=$libgnutls_config_prefix/bin/libgnutls-config
-- fi
-- fi
-+ min_libgnutls_version=1.0.0
-+ { $as_echo "$as_me:$LINENO: checking for libgnutls - version >= $min_libgnutls_version" >&5
-+$as_echo_n "checking for libgnutls - version >= $min_libgnutls_version... " >&6; }
-+
-+ if test -n "$PKG_CONFIG" && \
-+ { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gnutls\"") >&5
-+ ($PKG_CONFIG --exists --print-errors "gnutls") 2>&5
-+ ac_status=$?
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ (exit $ac_status); }; then
-+
-+ LIBGNUTLS_CFLAGS=`$PKG_CONFIG --cflags gnutls`
-+ LIBGNUTLS_LIBS=`$PKG_CONFIG --libs gnutls`
-+ libgnutls_config_version=`$PKG_CONFIG --modversion gnutls`
-
-- # Extract the first word of "libgnutls-config", so it can be a program name with args.
-+else
-+
-+ # Extract the first word of "libgnutls-config", so it can be a program name with args.
- set dummy libgnutls-config; ac_word=$2
--{ echo "$as_me:$LINENO: checking for $ac_word" >&5
--echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-+$as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_path_LIBGNUTLS_CONFIG+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
-+ $as_echo_n "(cached) " >&6
- else
- case $LIBGNUTLS_CONFIG in
- [\\/]* | ?:[\\/]*)
-@@ -3799,52 +4079,55 @@ else
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
--for as_dir in $PATH
-+for as_dir in $libgnutls_config_prefix/bin$PATH_SEPARATOR$PATH
- do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_LIBGNUTLS_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
- done
- done
- IFS=$as_save_IFS
-
-- test -z "$ac_cv_path_LIBGNUTLS_CONFIG" && ac_cv_path_LIBGNUTLS_CONFIG="no"
- ;;
- esac
- fi
- LIBGNUTLS_CONFIG=$ac_cv_path_LIBGNUTLS_CONFIG
- if test -n "$LIBGNUTLS_CONFIG"; then
-- { echo "$as_me:$LINENO: result: $LIBGNUTLS_CONFIG" >&5
--echo "${ECHO_T}$LIBGNUTLS_CONFIG" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: $LIBGNUTLS_CONFIG" >&5
-+$as_echo "$LIBGNUTLS_CONFIG" >&6; }
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
-
-
-- min_libgnutls_version=1.0.0
-- { echo "$as_me:$LINENO: checking for libgnutls - version >= $min_libgnutls_version" >&5
--echo $ECHO_N "checking for libgnutls - version >= $min_libgnutls_version... $ECHO_C" >&6; }
-- no_libgnutls=""
-- if test "$LIBGNUTLS_CONFIG" = "no" ; then
-- no_libgnutls=yes
-- else
-- LIBGNUTLS_CFLAGS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --cflags`
-- LIBGNUTLS_LIBS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --libs`
-- libgnutls_config_version=`$LIBGNUTLS_CONFIG $libgnutls_config_args --version`
-+ if test "$LIBGNUTLS_CONFIG"=no
-+ then
-+ no_libgnutls=yes
-+ echo "Can't obtain gnutls package info!" >&2
-+ fi
-+
-+ LIBGNUTLS_CFLAGS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --cflags`
-+ LIBGNUTLS_LIBS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --libs`
-+ libgnutls_config_version=`$LIBGNUTLS_CONFIG $libgnutls_config_args --version`
-
-
-- ac_save_CFLAGS="$CFLAGS"
-- ac_save_LIBS="$LIBS"
-- CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
-- LIBS="$LIBS $LIBGNUTLS_LIBS"
-- rm -f conf.libgnutlstest
-- if test "$cross_compiling" = yes; then
-+fi
-+
-+ if test "$no_libgnutls" != no
-+ then
-+ ac_save_CFLAGS="$CFLAGS"
-+ ac_save_LIBS="$LIBS"
-+ CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
-+ LIBS="$LIBS $LIBGNUTLS_LIBS"
-+
-+ rm -f conf.libgnutlstest
-+ if test "$cross_compiling" = yes; then
- echo $ac_n "cross compiling; assumed OK... $ac_c"
- else
- cat >conftest.$ac_ext <<_ACEOF
-@@ -3915,29 +4198,32 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
- else
-- echo "$as_me: program exited with status $ac_status" >&5
--echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: program exited with status $ac_status" >&5
-+$as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
- ( exit $ac_status )
- no_libgnutls=yes
- fi
-+rm -rf conftest.dSYM
- rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
- fi
-
-@@ -3947,15 +4233,21 @@ fi
- fi
-
- if test "x$no_libgnutls" = x ; then
-- { echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: yes" >&5
-+$as_echo "yes" >&6; }
- :
-+
-+
-+cat >>confdefs.h <<\_ACEOF
-+#define HAVE_LIBGNUTLS 1
-+_ACEOF
-+
- else
- if test -f conf.libgnutlstest ; then
- :
- else
-- { echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
-+ { $as_echo "$as_me:$LINENO: result: no" >&5
-+$as_echo "no" >&6; }
- fi
- if test "$LIBGNUTLS_CONFIG" = "no" ; then
- echo "*** The libgnutls-config script installed by LIBGNUTLS could not be found"
-@@ -3995,18 +4287,21 @@ case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
- esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-+$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-+ $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
-- } && test -s conftest$ac_exeext &&
-- $as_test_x conftest$ac_exeext; then
-+ } && test -s conftest$ac_exeext && {
-+ test "$cross_compiling" = yes ||
-+ $as_test_x conftest$ac_exeext
-+ }; then
- echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding LIBGNUTLS or finding the wrong"
- echo "*** version of LIBGNUTLS. If it is not finding LIBGNUTLS, you'll need to set your"
-@@ -4018,7 +4313,7 @@ eval "echo \"\$as_me:$LINENO: $ac_try_ec
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- else
-- echo "$as_me: failed program was:" >&5
-+ $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "*** The test program failed to compile or link. See the file config.log for the"
-@@ -4027,6 +4322,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
- echo "*** may want to edit the libgnutls-config script: $LIBGNUTLS_CONFIG"
- fi
-
-+rm -rf conftest.dSYM
- rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- CFLAGS="$ac_save_CFLAGS"
-@@ -4035,98 +4331,31 @@ rm -f core conftest.err conftest.$ac_obj
- fi
- LIBGNUTLS_CFLAGS=""
- LIBGNUTLS_LIBS=""
-- { { echo "$as_me:$LINENO: error: gnutls not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls" >&5
--echo "$as_me: error: gnutls not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: gnutls not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls" >&5
-+$as_echo "$as_me: error: gnutls not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls" >&2;}
- { (exit 1); exit 1; }; }
-- fi
-+ fi
-+
- rm -f conf.libgnutlstest
-
-
-
-
-- # This is a bloody hack for fedora core
-+ ## This is a bloody hack for fedora core
- CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
- LIBS="$LIBS $LIBGNUTLS_LIBS -ltasn1"
--
-- # Check gnuTLS SSL compatibility lib.
--
--{ echo "$as_me:$LINENO: checking for SSL_new in -lgnutls-openssl" >&5
--echo $ECHO_N "checking for SSL_new in -lgnutls-openssl... $ECHO_C" >&6; }
--if test "${ac_cv_lib_gnutls_openssl_SSL_new+set}" = set; then
-- echo $ECHO_N "(cached) $ECHO_C" >&6
--else
-- ac_check_lib_save_LIBS=$LIBS
--LIBS="-lgnutls-openssl $LIBS"
--cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h. */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h. */
--
--/* Override any GCC internal prototype to avoid an error.
-- Use char because int might match the return type of a GCC
-- builtin and then its argument prototype would still apply. */
--#ifdef __cplusplus
--extern "C"
--#endif
--char SSL_new ();
--int
--main ()
--{
--return SSL_new ();
-- ;
-- return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext conftest$ac_exeext
--if { (ac_try="$ac_link"
--case "(($ac_try" in
-- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-- *) ac_try_echo=$ac_try;;
--esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-- (eval "$ac_link") 2>conftest.er1
-- ac_status=$?
-- grep -v '^ *+' conftest.er1 >conftest.err
-- rm -f conftest.er1
-- cat conftest.err >&5
-- echo "$as_me:$LINENO: \$? = $ac_status" >&5
-- (exit $ac_status); } && {
-- test -z "$ac_c_werror_flag" ||
-- test ! -s conftest.err
-- } && test -s conftest$ac_exeext &&
-- $as_test_x conftest$ac_exeext; then
-- ac_cv_lib_gnutls_openssl_SSL_new=yes
--else
-- echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
-- ac_cv_lib_gnutls_openssl_SSL_new=no
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-- conftest$ac_exeext conftest.$ac_ext
--LIBS=$ac_check_lib_save_LIBS
- fi
--{ echo "$as_me:$LINENO: result: $ac_cv_lib_gnutls_openssl_SSL_new" >&5
--echo "${ECHO_T}$ac_cv_lib_gnutls_openssl_SSL_new" >&6; }
--if test $ac_cv_lib_gnutls_openssl_SSL_new = yes; then
-- cat >>confdefs.h <<_ACEOF
--#define HAVE_LIBGNUTLS_OPENSSL 1
--_ACEOF
-
-- LIBS="-lgnutls-openssl $LIBS"
-
-+if test "$enable_gnutls" != no ; then
-+ HAVE_LIBGNUTLS_TRUE=
-+ HAVE_LIBGNUTLS_FALSE='#'
- else
-- { { echo "$as_me:$LINENO: error: gnutls-openssl not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls" >&5
--echo "$as_me: error: gnutls-openssl not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls" >&2;}
-- { (exit 1); exit 1; }; }
-+ HAVE_LIBGNUTLS_TRUE='#'
-+ HAVE_LIBGNUTLS_FALSE=
- fi
-
-
--fi
--
- ac_config_files="$ac_config_files Makefile"
-
- cat >confcache <<\_ACEOF
-@@ -4156,11 +4385,12 @@ _ACEOF
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
-- *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
--echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
-+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
- esac ;;
- esac
-@@ -4193,12 +4423,12 @@ echo "$as_me: WARNING: Cache variable $a
- if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
-- { echo "$as_me:$LINENO: updating cache $cache_file" >&5
--echo "$as_me: updating cache $cache_file" >&6;}
-+ { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
-+$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
-- { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
--echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-+ { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
- fi
- rm -f confcache
-@@ -4214,7 +4444,7 @@ ac_ltlibobjs=
- for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-- ac_i=`echo "$ac_i" | sed "$ac_script"`
-+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-@@ -4226,40 +4456,48 @@ LTLIBOBJS=$ac_ltlibobjs
-
-
- if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-+ { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
- Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"AMDEP\" was never defined.
-+$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
- Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
- fi
- if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-+ { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
- Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-+$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
- Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
- fi
- if test -z "${PRIVATE_LIBRSYNC_TRUE}" && test -z "${PRIVATE_LIBRSYNC_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"PRIVATE_LIBRSYNC\" was never defined.
-+ { { $as_echo "$as_me:$LINENO: error: conditional \"PRIVATE_LIBRSYNC\" was never defined.
- Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"PRIVATE_LIBRSYNC\" was never defined.
-+$as_echo "$as_me: error: conditional \"PRIVATE_LIBRSYNC\" was never defined.
- Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
- fi
- if test -z "${PRIVATE_LIBSQLITE_TRUE}" && test -z "${PRIVATE_LIBSQLITE_FALSE}"; then
-- { { echo "$as_me:$LINENO: error: conditional \"PRIVATE_LIBSQLITE\" was never defined.
-+ { { $as_echo "$as_me:$LINENO: error: conditional \"PRIVATE_LIBSQLITE\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+$as_echo "$as_me: error: conditional \"PRIVATE_LIBSQLITE\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
-+if test -z "${HAVE_LIBGNUTLS_TRUE}" && test -z "${HAVE_LIBGNUTLS_FALSE}"; then
-+ { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_LIBGNUTLS\" was never defined.
- Usually this means the macro was only invoked conditionally." >&5
--echo "$as_me: error: conditional \"PRIVATE_LIBSQLITE\" was never defined.
-+$as_echo "$as_me: error: conditional \"HAVE_LIBGNUTLS\" was never defined.
- Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- : ${CONFIG_STATUS=./config.status}
-+ac_write_fail=0
- ac_clean_files_save=$ac_clean_files
- ac_clean_files="$ac_clean_files $CONFIG_STATUS"
--{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
--echo "$as_me: creating $CONFIG_STATUS" >&6;}
--cat >$CONFIG_STATUS <<_ACEOF
-+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- #! $SHELL
- # Generated by $as_me.
- # Run this file to recreate the current configuration.
-@@ -4272,7 +4510,7 @@ ac_cs_silent=false
- SHELL=\${CONFIG_SHELL-$SHELL}
- _ACEOF
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- ## --------------------- ##
- ## M4sh Initialization. ##
- ## --------------------- ##
-@@ -4282,7 +4520,7 @@ DUALCASE=1; export DUALCASE # for MKS sh
- if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
-- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-@@ -4304,17 +4542,45 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTE
- as_cr_digits='0123456789'
- as_cr_alnum=$as_cr_Letters$as_cr_digits
-
--# The user is always right.
--if test "${PATH_SEPARATOR+set}" != set; then
-- echo "#! /bin/sh" >conf$$.sh
-- echo "exit 0" >>conf$$.sh
-- chmod +x conf$$.sh
-- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-- PATH_SEPARATOR=';'
-+as_nl='
-+'
-+export as_nl
-+# Printing a long string crashes Solaris 7 /usr/bin/printf.
-+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-+ as_echo='printf %s\n'
-+ as_echo_n='printf %s'
-+else
-+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-+ as_echo_n='/usr/ucb/echo -n'
- else
-- PATH_SEPARATOR=:
-+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-+ as_echo_n_body='eval
-+ arg=$1;
-+ case $arg in
-+ *"$as_nl"*)
-+ expr "X$arg" : "X\\(.*\\)$as_nl";
-+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-+ esac;
-+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-+ '
-+ export as_echo_n_body
-+ as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
-- rm -f conf$$.sh
-+ export as_echo_body
-+ as_echo='sh -c $as_echo_body as_echo'
-+fi
-+
-+# The user is always right.
-+if test "${PATH_SEPARATOR+set}" != set; then
-+ PATH_SEPARATOR=:
-+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-+ PATH_SEPARATOR=';'
-+ }
- fi
-
- # Support unset when possible.
-@@ -4330,8 +4596,6 @@ fi
- # there to prevent editors from complaining about space-tab.
- # (If _AS_PATH_WALK were called with IFS unset, it would disable word
- # splitting by setting IFS to empty value.)
--as_nl='
--'
- IFS=" "" $as_nl"
-
- # Find who we are. Look in the path if we contain no directory separator.
-@@ -4354,7 +4618,7 @@ if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
-- echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
- fi
-
-@@ -4367,17 +4631,10 @@ PS2='> '
- PS4='+ '
-
- # NLS nuisances.
--for as_var in \
-- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-- LC_TELEPHONE LC_TIME
--do
-- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-- eval $as_var=C; export $as_var
-- else
-- ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-- fi
--done
-+LC_ALL=C
-+export LC_ALL
-+LANGUAGE=C
-+export LANGUAGE
-
- # Required to use basename.
- if expr a : '\(a\)' >/dev/null 2>&1 &&
-@@ -4399,7 +4656,7 @@ as_me=`$as_basename -- "$0" ||
- $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
--echo X/"$0" |
-+$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
-@@ -4450,7 +4707,7 @@ $as_unset CDPATH
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
-- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
-@@ -4478,7 +4735,6 @@ case `echo -n x` in
- *)
- ECHO_N='-n';;
- esac
--
- if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-@@ -4491,19 +4747,22 @@ if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
- else
- rm -f conf$$.dir
-- mkdir conf$$.dir
-+ mkdir conf$$.dir 2>/dev/null
- fi
--echo >conf$$.file
--if ln -s conf$$.file conf$$ 2>/dev/null; then
-- as_ln_s='ln -s'
-- # ... but there are two gotchas:
-- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-- # In both cases, we have to default to `cp -p'.
-- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+if (echo >conf$$.file) 2>/dev/null; then
-+ if ln -s conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s='ln -s'
-+ # ... but there are two gotchas:
-+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-+ # In both cases, we have to default to `cp -p'.
-+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-+ as_ln_s='cp -p'
-+ elif ln conf$$.file conf$$ 2>/dev/null; then
-+ as_ln_s=ln
-+ else
- as_ln_s='cp -p'
--elif ln conf$$.file conf$$ 2>/dev/null; then
-- as_ln_s=ln
-+ fi
- else
- as_ln_s='cp -p'
- fi
-@@ -4528,10 +4787,10 @@ else
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
-- test -d "$1/.";
-+ test -d "$1/.";
- else
- case $1 in
-- -*)set "./$1";;
-+ -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
-@@ -4554,7 +4813,7 @@ exec 6>&1
- # values after options handling.
- ac_log="
- This file was extended by csync2 $as_me 1.34, which was
--generated by GNU Autoconf 2.61. Invocation command line was
-+generated by GNU Autoconf 2.63. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
-@@ -4567,7 +4826,16 @@ on `(hostname || uname -n) 2>/dev/null |
-
- _ACEOF
-
--cat >>$CONFIG_STATUS <<_ACEOF
-+case $ac_config_files in *"
-+"*) set x $ac_config_files; shift; ac_config_files=$*;;
-+esac
-+
-+case $ac_config_headers in *"
-+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-+esac
-+
-+
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- # Files that config.status was made for.
- config_files="$ac_config_files"
- config_headers="$ac_config_headers"
-@@ -4575,22 +4843,23 @@ config_commands="$ac_config_commands"
-
- _ACEOF
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- ac_cs_usage="\
- \`$as_me' instantiates files from templates according to the
- current configuration.
-
--Usage: $0 [OPTIONS] [FILE]...
-+Usage: $0 [OPTION]... [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
-- -q, --quiet do not print progress messages
-+ -q, --quiet, --silent
-+ do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
-- --file=FILE[:TEMPLATE]
-- instantiate the configuration file FILE
-- --header=FILE[:TEMPLATE]
-- instantiate the configuration header FILE
-+ --file=FILE[:TEMPLATE]
-+ instantiate the configuration file FILE
-+ --header=FILE[:TEMPLATE]
-+ instantiate the configuration header FILE
-
- Configuration files:
- $config_files
-@@ -4604,24 +4873,25 @@ $config_commands
- Report bugs to ."
-
- _ACEOF
--cat >>$CONFIG_STATUS <<_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_cs_version="\\
- csync2 config.status 1.34
--configured by $0, generated by GNU Autoconf 2.61,
-- with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-+configured by $0, generated by GNU Autoconf 2.63,
-+ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
--Copyright (C) 2006 Free Software Foundation, Inc.
-+Copyright (C) 2008 Free Software Foundation, Inc.
- This config.status script is free software; the Free Software Foundation
- gives unlimited permission to copy, distribute and modify it."
-
- ac_pwd='$ac_pwd'
- srcdir='$srcdir'
- INSTALL='$INSTALL'
-+AWK='$AWK'
-+test -n "\$AWK" || AWK=awk
- _ACEOF
-
--cat >>$CONFIG_STATUS <<\_ACEOF
--# If no file are specified by the user, then we need to provide default
--# value. By we need to know if files were specified by the user.
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+# The default lists apply if the user does not specify any file.
- ac_need_defaults=:
- while test $# != 0
- do
-@@ -4643,30 +4913,36 @@ do
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-- echo "$ac_cs_version"; exit ;;
-+ $as_echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
-- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-+ case $ac_optarg in
-+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
-- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-+ case $ac_optarg in
-+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-+ esac
-+ CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
-- { echo "$as_me: error: ambiguous option: $1
-+ { $as_echo "$as_me: error: ambiguous option: $1
- Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
-- echo "$ac_cs_usage"; exit ;;
-+ $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
-- -*) { echo "$as_me: error: unrecognized option: $1
-+ -*) { $as_echo "$as_me: error: unrecognized option: $1
- Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
-
-@@ -4685,27 +4961,29 @@ if $ac_cs_silent; then
- fi
-
- _ACEOF
--cat >>$CONFIG_STATUS <<_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- if \$ac_cs_recheck; then
-- echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-- CONFIG_SHELL=$SHELL
-+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+ shift
-+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-+ CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
-- exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-+ exec "\$@"
- fi
-
- _ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- exec 5>>config.log
- {
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
- ## Running $as_me. ##
- _ASBOX
-- echo "$ac_log"
-+ $as_echo "$ac_log"
- } >&5
-
- _ACEOF
--cat >>$CONFIG_STATUS <<_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- #
- # INIT-COMMANDS
- #
-@@ -4713,7 +4991,7 @@ AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac
-
- _ACEOF
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
- # Handling of arguments.
- for ac_config_target in $ac_config_targets
-@@ -4723,8 +5001,8 @@ do
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
-- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
--echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-+ *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
- done
-@@ -4765,151 +5043,143 @@ $debug ||
- (umask 077 && mkdir "$tmp")
- } ||
- {
-- echo "$me: cannot create a temporary directory in ." >&2
-+ $as_echo "$as_me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
- }
-
--#
--# Set up the sed scripts for CONFIG_FILES section.
--#
--
--# No need to generate the scripts if there are no CONFIG_FILES.
--# This happens for instance when ./config.status config.h
-+# Set up the scripts for CONFIG_FILES section.
-+# No need to generate them if there are no CONFIG_FILES.
-+# This happens for instance with `./config.status config.h'.
- if test -n "$CONFIG_FILES"; then
-
--_ACEOF
-
-+ac_cr='
'
-+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
-+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-+ ac_cs_awk_cr='\\r'
-+else
-+ ac_cs_awk_cr=$ac_cr
-+fi
-+
-+echo 'BEGIN {' >"$tmp/subs1.awk" &&
-+_ACEOF
-
-
-+{
-+ echo "cat >conf$$subs.awk <<_ACEOF" &&
-+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-+ echo "_ACEOF"
-+} >conf$$subs.sh ||
-+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
- ac_delim='%!_!# '
- for ac_last_try in false false false false false :; do
-- cat >conf$$subs.sed <<_ACEOF
--SHELL!$SHELL$ac_delim
--PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
--PACKAGE_NAME!$PACKAGE_NAME$ac_delim
--PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
--PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
--PACKAGE_STRING!$PACKAGE_STRING$ac_delim
--PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
--exec_prefix!$exec_prefix$ac_delim
--prefix!$prefix$ac_delim
--program_transform_name!$program_transform_name$ac_delim
--bindir!$bindir$ac_delim
--sbindir!$sbindir$ac_delim
--libexecdir!$libexecdir$ac_delim
--datarootdir!$datarootdir$ac_delim
--datadir!$datadir$ac_delim
--sysconfdir!$sysconfdir$ac_delim
--sharedstatedir!$sharedstatedir$ac_delim
--localstatedir!$localstatedir$ac_delim
--includedir!$includedir$ac_delim
--oldincludedir!$oldincludedir$ac_delim
--docdir!$docdir$ac_delim
--infodir!$infodir$ac_delim
--htmldir!$htmldir$ac_delim
--dvidir!$dvidir$ac_delim
--pdfdir!$pdfdir$ac_delim
--psdir!$psdir$ac_delim
--libdir!$libdir$ac_delim
--localedir!$localedir$ac_delim
--mandir!$mandir$ac_delim
--DEFS!$DEFS$ac_delim
--ECHO_C!$ECHO_C$ac_delim
--ECHO_N!$ECHO_N$ac_delim
--ECHO_T!$ECHO_T$ac_delim
--LIBS!$LIBS$ac_delim
--build_alias!$build_alias$ac_delim
--host_alias!$host_alias$ac_delim
--target_alias!$target_alias$ac_delim
--INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
--INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
--INSTALL_DATA!$INSTALL_DATA$ac_delim
--CYGPATH_W!$CYGPATH_W$ac_delim
--PACKAGE!$PACKAGE$ac_delim
--VERSION!$VERSION$ac_delim
--ACLOCAL!$ACLOCAL$ac_delim
--AUTOCONF!$AUTOCONF$ac_delim
--AUTOMAKE!$AUTOMAKE$ac_delim
--AUTOHEADER!$AUTOHEADER$ac_delim
--MAKEINFO!$MAKEINFO$ac_delim
--AMTAR!$AMTAR$ac_delim
--install_sh!$install_sh$ac_delim
--STRIP!$STRIP$ac_delim
--INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
--AWK!$AWK$ac_delim
--SET_MAKE!$SET_MAKE$ac_delim
--am__leading_dot!$am__leading_dot$ac_delim
--CC!$CC$ac_delim
--CFLAGS!$CFLAGS$ac_delim
--LDFLAGS!$LDFLAGS$ac_delim
--CPPFLAGS!$CPPFLAGS$ac_delim
--ac_ct_CC!$ac_ct_CC$ac_delim
--EXEEXT!$EXEEXT$ac_delim
--OBJEXT!$OBJEXT$ac_delim
--DEPDIR!$DEPDIR$ac_delim
--am__include!$am__include$ac_delim
--am__quote!$am__quote$ac_delim
--AMDEP_TRUE!$AMDEP_TRUE$ac_delim
--AMDEP_FALSE!$AMDEP_FALSE$ac_delim
--AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
--CCDEPMODE!$CCDEPMODE$ac_delim
--am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
--am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
--YACC!$YACC$ac_delim
--YFLAGS!$YFLAGS$ac_delim
--LEX!$LEX$ac_delim
--LEX_OUTPUT_ROOT!$LEX_OUTPUT_ROOT$ac_delim
--LEXLIB!$LEXLIB$ac_delim
--librsync_source_file!$librsync_source_file$ac_delim
--PRIVATE_LIBRSYNC_TRUE!$PRIVATE_LIBRSYNC_TRUE$ac_delim
--PRIVATE_LIBRSYNC_FALSE!$PRIVATE_LIBRSYNC_FALSE$ac_delim
--libsqlite_source_file!$libsqlite_source_file$ac_delim
--PRIVATE_LIBSQLITE_TRUE!$PRIVATE_LIBSQLITE_TRUE$ac_delim
--PRIVATE_LIBSQLITE_FALSE!$PRIVATE_LIBSQLITE_FALSE$ac_delim
--LIBGNUTLS_CONFIG!$LIBGNUTLS_CONFIG$ac_delim
--LIBGNUTLS_CFLAGS!$LIBGNUTLS_CFLAGS$ac_delim
--LIBGNUTLS_LIBS!$LIBGNUTLS_LIBS$ac_delim
--LIBOBJS!$LIBOBJS$ac_delim
--LTLIBOBJS!$LTLIBOBJS$ac_delim
--_ACEOF
-+ . ./conf$$subs.sh ||
-+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-
-- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 87; then
-+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-+ if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
-- { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
--echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
- done
-+rm -f conf$$subs.sh
-
--ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
--if test -n "$ac_eof"; then
-- ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-- ac_eof=`expr $ac_eof + 1`
--fi
--
--cat >>$CONFIG_STATUS <<_ACEOF
--cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
--/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
--_ACEOF
--sed '
--s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
--s/^/s,@/; s/!/@,|#_!!_#|/
--:n
--t n
--s/'"$ac_delim"'$/,g/; t
--s/$/\\/; p
--N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
--' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF
--:end
--s/|#_!!_#|//g
--CEOF$ac_eof
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
- _ACEOF
-+sed -n '
-+h
-+s/^/S["/; s/!.*/"]=/
-+p
-+g
-+s/^[^!]*!//
-+:repl
-+t repl
-+s/'"$ac_delim"'$//
-+t delim
-+:nl
-+h
-+s/\(.\{148\}\).*/\1/
-+t more1
-+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-+p
-+n
-+b repl
-+:more1
-+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-+p
-+g
-+s/.\{148\}//
-+t nl
-+:delim
-+h
-+s/\(.\{148\}\).*/\1/
-+t more2
-+s/["\\]/\\&/g; s/^/"/; s/$/"/
-+p
-+b
-+:more2
-+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-+p
-+g
-+s/.\{148\}//
-+t delim
-+' >$CONFIG_STATUS || ac_write_fail=1
-+rm -f conf$$subs.awk
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+_ACAWK
-+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
-+ for (key in S) S_is_set[key] = 1
-+ FS = ""
-
-+}
-+{
-+ line = $ 0
-+ nfields = split(line, field, "@")
-+ substed = 0
-+ len = length(field[1])
-+ for (i = 2; i < nfields; i++) {
-+ key = field[i]
-+ keylen = length(key)
-+ if (S_is_set[key]) {
-+ value = S[key]
-+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-+ len += length(value) + length(field[++i])
-+ substed = 1
-+ } else
-+ len += 1 + keylen
-+ }
-+
-+ print line
-+}
-+
-+_ACAWK
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-+else
-+ cat
-+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-+ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
-+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
-+ { (exit 1); exit 1; }; }
-+_ACEOF
-
- # VPATH may cause trouble with some makes, so we remove $(srcdir),
- # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-@@ -4926,19 +5196,133 @@ s/^[^=]*=[ ]*$//
- }'
- fi
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- fi # test -n "$CONFIG_FILES"
-
-+# Set up the scripts for CONFIG_HEADERS section.
-+# No need to generate them if there are no CONFIG_HEADERS.
-+# This happens for instance with `./config.status Makefile'.
-+if test -n "$CONFIG_HEADERS"; then
-+cat >"$tmp/defines.awk" <<\_ACAWK ||
-+BEGIN {
-+_ACEOF
-+
-+# Transform confdefs.h into an awk script `defines.awk', embedded as
-+# here-document in config.status, that substitutes the proper values into
-+# config.h.in to produce config.h.
-+
-+# Create a delimiter string that does not exist in confdefs.h, to ease
-+# handling of long lines.
-+ac_delim='%!_!# '
-+for ac_last_try in false false :; do
-+ ac_t=`sed -n "/$ac_delim/p" confdefs.h`
-+ if test -z "$ac_t"; then
-+ break
-+ elif $ac_last_try; then
-+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
-+$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
-+ { (exit 1); exit 1; }; }
-+ else
-+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-+ fi
-+done
-
--for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
-+# For the awk script, D is an array of macro values keyed by name,
-+# likewise P contains macro parameters if any. Preserve backslash
-+# newline sequences.
-+
-+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-+sed -n '
-+s/.\{148\}/&'"$ac_delim"'/g
-+t rset
-+:rset
-+s/^[ ]*#[ ]*define[ ][ ]*/ /
-+t def
-+d
-+:def
-+s/\\$//
-+t bsnl
-+s/["\\]/\\&/g
-+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-+D["\1"]=" \3"/p
-+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-+d
-+:bsnl
-+s/["\\]/\\&/g
-+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-+D["\1"]=" \3\\\\\\n"\\/p
-+t cont
-+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-+t cont
-+d
-+:cont
-+n
-+s/.\{148\}/&'"$ac_delim"'/g
-+t clear
-+:clear
-+s/\\$//
-+t bsnlc
-+s/["\\]/\\&/g; s/^/"/; s/$/"/p
-+d
-+:bsnlc
-+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-+b cont
-+' >$CONFIG_STATUS || ac_write_fail=1
-+
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+ for (key in D) D_is_set[key] = 1
-+ FS = ""
-+}
-+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
-+ line = \$ 0
-+ split(line, arg, " ")
-+ if (arg[1] == "#") {
-+ defundef = arg[2]
-+ mac1 = arg[3]
-+ } else {
-+ defundef = substr(arg[1], 2)
-+ mac1 = arg[2]
-+ }
-+ split(mac1, mac2, "(") #)
-+ macro = mac2[1]
-+ prefix = substr(line, 1, index(line, defundef) - 1)
-+ if (D_is_set[macro]) {
-+ # Preserve the white space surrounding the "#".
-+ print prefix "define", macro P[macro] D[macro]
-+ next
-+ } else {
-+ # Replace #undef with comments. This is necessary, for example,
-+ # in the case of _POSIX_SOURCE, which is predefined and required
-+ # on some systems where configure will not decide to define it.
-+ if (defundef == "undef") {
-+ print "/*", prefix defundef, macro, "*/"
-+ next
-+ }
-+ }
-+}
-+{ print }
-+_ACAWK
-+_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-+ { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
-+$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
-+ { (exit 1); exit 1; }; }
-+fi # test -n "$CONFIG_HEADERS"
-+
-+
-+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
-+shift
-+for ac_tag
- do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
-- :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
--echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-+ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
- { (exit 1); exit 1; }; };;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-@@ -4967,26 +5351,38 @@ echo "$as_me: error: Invalid tag $ac_tag
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
-- { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
--echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-+ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-- ac_file_inputs="$ac_file_inputs $ac_f"
-+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-+ ac_file_inputs="$ac_file_inputs '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
-- configure_input="Generated from "`IFS=:
-- echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-+ configure_input='Generated from '`
-+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-+ `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
-- { echo "$as_me:$LINENO: creating $ac_file" >&5
--echo "$as_me: creating $ac_file" >&6;}
-+ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
-+$as_echo "$as_me: creating $ac_file" >&6;}
- fi
-+ # Neutralize special characters interpreted by sed in replacement strings.
-+ case $configure_input in #(
-+ *\&* | *\|* | *\\* )
-+ ac_sed_conf_input=`$as_echo "$configure_input" |
-+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
-+ *) ac_sed_conf_input=$configure_input;;
-+ esac
-
- case $ac_tag in
-- *:-:* | *:-) cat >"$tmp/stdin";;
-+ *:-:* | *:-) cat >"$tmp/stdin" \
-+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-+$as_echo "$as_me: error: could not create $ac_file" >&2;}
-+ { (exit 1); exit 1; }; } ;;
- esac
- ;;
- esac
-@@ -4996,7 +5392,7 @@ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
--echo X"$ac_file" |
-+$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
-@@ -5022,7 +5418,7 @@ echo X"$ac_file" |
- as_dirs=
- while :; do
- case $as_dir in #(
-- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
-@@ -5031,7 +5427,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
--echo X"$as_dir" |
-+$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
-@@ -5052,17 +5448,17 @@ echo X"$as_dir" |
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
-- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
--echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- ac_builddir=.
-
- case "$ac_dir" in
- .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *)
-- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
-- ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-@@ -5102,12 +5498,13 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_
- esac
- _ACEOF
-
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- # If the template does not know about datarootdir, expand it.
- # FIXME: This hack should be removed a few years after 2.60.
- ac_datarootdir_hack=; ac_datarootdir_seen=
-
--case `sed -n '/datarootdir/ {
-+ac_sed_dataroot='
-+/datarootdir/ {
- p
- q
- }
-@@ -5116,13 +5513,14 @@ case `sed -n '/datarootdir/ {
- /@infodir@/p
- /@localedir@/p
- /@mandir@/p
--' $ac_file_inputs` in
-+'
-+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
- *datarootdir*) ac_datarootdir_seen=yes;;
- *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-- { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
--echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
- _ACEOF
--cat >>$CONFIG_STATUS <<_ACEOF
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
-@@ -5136,15 +5534,16 @@ _ACEOF
- # Neutralize VPATH when `$srcdir' = `.'.
- # Shell code in configure.ac might set extrasub.
- # FIXME: do we really want to maintain this feature?
--cat >>$CONFIG_STATUS <<_ACEOF
-- sed "$ac_vpsub
-+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-+ac_sed_extra="$ac_vpsub
- $extrasub
- _ACEOF
--cat >>$CONFIG_STATUS <<\_ACEOF
-+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- :t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
--s&@configure_input@&$configure_input&;t t
-+s|@configure_input@|$ac_sed_conf_input|;t t
- s&@top_builddir@&$ac_top_builddir_sub&;t t
-+s&@top_build_prefix@&$ac_top_build_prefix&;t t
- s&@srcdir@&$ac_srcdir&;t t
- s&@abs_srcdir@&$ac_abs_srcdir&;t t
- s&@top_srcdir@&$ac_top_srcdir&;t t
-@@ -5154,135 +5553,74 @@ s&@abs_builddir@&$ac_abs_builddir&;t t
- s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
- s&@INSTALL@&$ac_INSTALL&;t t
- $ac_datarootdir_hack
--" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
-+"
-+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-+$as_echo "$as_me: error: could not create $ac_file" >&2;}
-+ { (exit 1); exit 1; }; }
-
- test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
- which seems to be undefined. Please make sure it is defined." >&5
--echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
- which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
-- -) cat "$tmp/out"; rm -f "$tmp/out";;
-- *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-- esac
-+ -) cat "$tmp/out" && rm -f "$tmp/out";;
-+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
-+ esac \
-+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-+$as_echo "$as_me: error: could not create $ac_file" >&2;}
-+ { (exit 1); exit 1; }; }
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
--_ACEOF
--
--# Transform confdefs.h into a sed script `conftest.defines', that
--# substitutes the proper values into config.h.in to produce config.h.
--rm -f conftest.defines conftest.tail
--# First, append a space to every undef/define line, to ease matching.
--echo 's/$/ /' >conftest.defines
--# Then, protect against being on the right side of a sed subst, or in
--# an unquoted here document, in config.status. If some macros were
--# called several times there might be several #defines for the same
--# symbol, which is useless. But do not sort them, since the last
--# AC_DEFINE must be honored.
--ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
--# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
--# NAME is the cpp macro being defined, VALUE is the value it is being given.
--# PARAMS is the parameter list in the macro definition--in most cases, it's
--# just an empty string.
--ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
--ac_dB='\\)[ (].*,\\1define\\2'
--ac_dC=' '
--ac_dD=' ,'
--
--uniq confdefs.h |
-- sed -n '
-- t rset
-- :rset
-- s/^[ ]*#[ ]*define[ ][ ]*//
-- t ok
-- d
-- :ok
-- s/[\\&,]/\\&/g
-- s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
-- s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
-- ' >>conftest.defines
--
--# Remove the space that was appended to ease matching.
--# Then replace #undef with comments. This is necessary, for
--# example, in the case of _POSIX_SOURCE, which is predefined and required
--# on some systems where configure will not decide to define it.
--# (The regexp can be short, since the line contains either #define or #undef.)
--echo 's/ $//
--s,^[ #]*u.*,/* & */,' >>conftest.defines
--
--# Break up conftest.defines:
--ac_max_sed_lines=50
--
--# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
--# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
--# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
--# et cetera.
--ac_in='$ac_file_inputs'
--ac_out='"$tmp/out1"'
--ac_nxt='"$tmp/out2"'
--
--while :
--do
-- # Write a here document:
-- cat >>$CONFIG_STATUS <<_ACEOF
-- # First, check the format of the line:
-- cat >"\$tmp/defines.sed" <<\\CEOF
--/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
--/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
--b
--:def
--_ACEOF
-- sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
-- echo 'CEOF
-- sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
-- ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
-- sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
-- grep . conftest.tail >/dev/null || break
-- rm -f conftest.defines
-- mv conftest.tail conftest.defines
--done
--rm -f conftest.defines conftest.tail
--
--echo "ac_result=$ac_in" >>$CONFIG_STATUS
--cat >>$CONFIG_STATUS <<\_ACEOF
- if test x"$ac_file" != x-; then
-- echo "/* $configure_input */" >"$tmp/config.h"
-- cat "$ac_result" >>"$tmp/config.h"
-- if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
-- { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
--echo "$as_me: $ac_file is unchanged" >&6;}
-+ {
-+ $as_echo "/* $configure_input */" \
-+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
-+ } >"$tmp/config.h" \
-+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-+$as_echo "$as_me: error: could not create $ac_file" >&2;}
-+ { (exit 1); exit 1; }; }
-+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
-+ { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-+$as_echo "$as_me: $ac_file is unchanged" >&6;}
- else
-- rm -f $ac_file
-- mv "$tmp/config.h" $ac_file
-+ rm -f "$ac_file"
-+ mv "$tmp/config.h" "$ac_file" \
-+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-+$as_echo "$as_me: error: could not create $ac_file" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
- else
-- echo "/* $configure_input */"
-- cat "$ac_result"
-+ $as_echo "/* $configure_input */" \
-+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-+ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
-+$as_echo "$as_me: error: could not create -" >&2;}
-+ { (exit 1); exit 1; }; }
- fi
-- rm -f "$tmp/out12"
--# Compute $ac_file's index in $config_headers.
-+# Compute "$ac_file"'s index in $config_headers.
- _am_stamp_count=1
- for _am_header in $config_headers :; do
- case $_am_header in
-- $ac_file | $ac_file:* )
-+ "$ac_file" | "$ac_file":* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
- done
--echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
--$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-- X$ac_file : 'X\(//\)[^/]' \| \
-- X$ac_file : 'X\(//\)$' \| \
-- X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
--echo X$ac_file |
-+echo "timestamp for "$ac_file"" >`$as_dirname -- "$ac_file" ||
-+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-+ X"$ac_file" : 'X\(//\)[^/]' \| \
-+ X"$ac_file" : 'X\(//\)$' \| \
-+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-+$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
-@@ -5302,8 +5640,8 @@ echo X$ac_file |
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
-- :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
--echo "$as_me: executing $ac_file commands" >&6;}
-+ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
-+$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-@@ -5324,7 +5662,7 @@ $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
--echo X"$mf" |
-+$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
-@@ -5374,7 +5712,7 @@ $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
--echo X"$file" |
-+$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
-@@ -5400,7 +5738,7 @@ echo X"$file" |
- as_dirs=
- while :; do
- case $as_dir in #(
-- *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
-@@ -5409,7 +5747,7 @@ $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
--echo X"$as_dir" |
-+$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
-@@ -5430,8 +5768,8 @@ echo X"$as_dir" |
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
-- } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
--echo "$as_me: error: cannot create directory $as_dir" >&2;}
-+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
-@@ -5448,6 +5786,11 @@ _ACEOF
- chmod +x $CONFIG_STATUS
- ac_clean_files=$ac_clean_files_save
-
-+test $ac_write_fail = 0 ||
-+ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
-+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
-+ { (exit 1); exit 1; }; }
-+
-
- # configure is writing to config.log, and then calls config.status.
- # config.status does its own redirection, appending to config.log.
-@@ -5469,5 +5812,8 @@ if test "$no_create" != yes; then
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
- fi
--
-+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-+ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-+fi
-
-Index: csync2-1.34/configure.ac
-===================================================================
---- csync2-1.34.orig/configure.ac
-+++ csync2-1.34/configure.ac
-@@ -17,11 +17,11 @@
- # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
- # Process this file with autoconf to produce a configure script.
--AC_INIT(csync2, 1.34, clifford@clifford.at)
-+AC_INIT([csync2],[1.34],[clifford@clifford.at])
- AM_INIT_AUTOMAKE
-
- AC_CONFIG_SRCDIR(csync2.c)
--AM_CONFIG_HEADER(config.h)
-+AC_CONFIG_HEADERS([config.h])
-
- # Use /etc and /var instead of $prefix/...
- test "$localstatedir" = '${prefix}/var' && localstatedir=/var
-@@ -52,25 +52,19 @@ AC_ARG_WITH([libsqlite-source],
- AM_CONDITIONAL([PRIVATE_LIBSQLITE], [test -n "$libsqlite_source_file"])
-
- AC_ARG_ENABLE([gnutls],
-- [AC_HELP_STRING([--disable-gnutls],
-- [enable/disable GNU TLS support (default is enabled)])],
-+ [AS_HELP_STRING([--disable-gnutls],[enable/disable GNU TLS support (default is enabled)])],
- [], [ enable_gnutls=yes ])
-
- if test "$enable_gnutls" != no
- then
--
- # Check for gnuTLS.
- AM_PATH_LIBGNUTLS(1.0.0, , [ AC_MSG_ERROR([[gnutls not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls]]) ])
-
-- # This is a bloody hack for fedora core
-+ ## This is a bloody hack for fedora core
- CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
- LIBS="$LIBS $LIBGNUTLS_LIBS -ltasn1"
--
-- # Check gnuTLS SSL compatibility lib.
-- AC_CHECK_LIB([gnutls-openssl], [SSL_new], , [AC_MSG_ERROR([[gnutls-openssl not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls]])])
--
- fi
-+AM_CONDITIONAL([HAVE_LIBGNUTLS], [test "$enable_gnutls" != no ])
-
- AC_CONFIG_FILES([Makefile])
- AC_OUTPUT
--
-Index: csync2-1.34/conn.c
-===================================================================
---- csync2-1.34.orig/conn.c
-+++ csync2-1.34/conn.c
-@@ -30,21 +30,20 @@
- #include
- #include
-
--#ifdef HAVE_LIBGNUTLS_OPENSSL
-+#ifdef HAVE_LIBGNUTLS
- # include
--# include
-+# include
- #endif
-
- int conn_fd_in = -1;
- int conn_fd_out = -1;
- int conn_clisok = 0;
-
--#ifdef HAVE_LIBGNUTLS_OPENSSL
-+#ifdef HAVE_LIBGNUTLS
- int csync_conn_usessl = 0;
-
--SSL_METHOD *conn_ssl_meth;
--SSL_CTX *conn_ssl_ctx;
--SSL *conn_ssl;
-+static gnutls_session_t conn_tls_session;
-+static gnutls_certificate_credentials_t conn_x509_cred;
- #endif
-
- int conn_open(const char *peername)
-@@ -83,7 +82,7 @@ int conn_open(const char *peername)
-
- conn_fd_out = conn_fd_in;
- conn_clisok = 1;
--#ifdef HAVE_LIBGNUTLS_OPENSSL
-+#ifdef HAVE_LIBGNUTLS
- csync_conn_usessl = 0;
- #endif
-
-@@ -97,7 +96,7 @@ int conn_set(int infd, int outfd)
- conn_fd_in = infd;
- conn_fd_out = outfd;
- conn_clisok = 1;
--#ifdef HAVE_LIBGNUTLS_OPENSSL
-+#ifdef HAVE_LIBGNUTLS
- csync_conn_usessl = 0;
- #endif
-
-@@ -110,43 +109,106 @@ int conn_set(int infd, int outfd)
- }
-
-
--#ifdef HAVE_LIBGNUTLS_OPENSSL
-+#ifdef HAVE_LIBGNUTLS
-
--char *ssl_keyfile = ETCDIR "/csync2_ssl_key.pem";
--char *ssl_certfile = ETCDIR "/csync2_ssl_cert.pem";
-+static void ssl_log(int level, const char* msg)
-+{ csync_debug(level, "%s", msg); }
-+
-+static const char *ssl_keyfile = ETCDIR "/csync2_ssl_key.pem";
-+static const char *ssl_certfile = ETCDIR "/csync2_ssl_cert.pem";
-
- int conn_activate_ssl(int server_role)
- {
-- static int sslinit = 0;
-+ gnutls_alert_description_t alrt;
-+ int err;
-
- if (csync_conn_usessl)
- return 0;
-
-- if (!sslinit) {
-- SSL_load_error_strings();
-- SSL_library_init();
-- sslinit=1;
-+ gnutls_global_init();
-+ gnutls_global_set_log_function(ssl_log);
-+ gnutls_global_set_log_level(10);
-+
-+ gnutls_certificate_allocate_credentials(&conn_x509_cred);
-+
-+ err = gnutls_certificate_set_x509_key_file(conn_x509_cred, ssl_certfile, ssl_keyfile, GNUTLS_X509_FMT_PEM);
-+ if(err != GNUTLS_E_SUCCESS) {
-+ gnutls_certificate_free_credentials(conn_x509_cred);
-+ gnutls_global_deinit();
-+
-+ csync_fatal(
-+ "SSL: failed to use key file %s and/or certificate file %s: %s (%s)\n",
-+ ssl_keyfile,
-+ ssl_certfile,
-+ gnutls_strerror(err),
-+ gnutls_strerror_name(err)
-+ );
- }
-
-- conn_ssl_meth = (server_role ? SSLv23_server_method : SSLv23_client_method)();
-- conn_ssl_ctx = SSL_CTX_new(conn_ssl_meth);
--
-- if (SSL_CTX_use_PrivateKey_file(conn_ssl_ctx, ssl_keyfile, SSL_FILETYPE_PEM) <= 0)
-- csync_fatal("SSL: failed to use key file %s.\n", ssl_keyfile);
--
-- if (SSL_CTX_use_certificate_file(conn_ssl_ctx, ssl_certfile, SSL_FILETYPE_PEM) <= 0)
-- csync_fatal("SSL: failed to use certificate file %s.\n", ssl_certfile);
-+ if(server_role) {
-+ gnutls_certificate_free_cas(conn_x509_cred);
-
-- if (! (conn_ssl = SSL_new(conn_ssl_ctx)) )
-- csync_fatal("Creating a new SSL handle failed.\n");
--
-- gnutls_certificate_server_set_request(conn_ssl->gnutls_state, GNUTLS_CERT_REQUIRE);
-+ if(gnutls_certificate_set_x509_trust_file(conn_x509_cred, ssl_certfile, GNUTLS_X509_FMT_PEM) < 1) {
-+ gnutls_certificate_free_credentials(conn_x509_cred);
-+ gnutls_global_deinit();
-+
-+ csync_fatal(
-+ "SSL: failed to use certificate file %s as CA.\n",
-+ ssl_certfile
-+ );
-+ }
-+ } else
-+ gnutls_certificate_free_ca_names(conn_x509_cred);
-
-- SSL_set_rfd(conn_ssl, conn_fd_in);
-- SSL_set_wfd(conn_ssl, conn_fd_out);
-+ gnutls_init(&conn_tls_session, (server_role ? GNUTLS_SERVER : GNUTLS_CLIENT));
-+ gnutls_priority_set_direct(conn_tls_session, "PERFORMANCE", NULL);
-+ gnutls_credentials_set(conn_tls_session, GNUTLS_CRD_CERTIFICATE, conn_x509_cred);
-+
-+ if(server_role) {
-+ gnutls_certificate_send_x509_rdn_sequence(conn_tls_session, 0);
-+ gnutls_certificate_server_set_request(conn_tls_session, GNUTLS_CERT_REQUIRE);
-+ }
-
-- if ( (server_role ? SSL_accept : SSL_connect)(conn_ssl) < 1 )
-- csync_fatal("Establishing SSL connection failed.\n");
-+ gnutls_transport_set_ptr2(
-+ conn_tls_session,
-+ (gnutls_transport_ptr_t)conn_fd_in,
-+ (gnutls_transport_ptr_t)conn_fd_out
-+ );
-+
-+ err = gnutls_handshake(conn_tls_session);
-+ switch(err) {
-+ case GNUTLS_E_SUCCESS:
-+ break;
-+
-+ case GNUTLS_E_WARNING_ALERT_RECEIVED:
-+ alrt = gnutls_alert_get(conn_tls_session);
-+ fprintf(
-+ csync_debug_out,
-+ "SSL: warning alert received from peer: %d (%s).\n",
-+ alrt, gnutls_alert_get_name(alrt)
-+ );
-+ break;
-+
-+ case GNUTLS_E_FATAL_ALERT_RECEIVED:
-+ alrt = gnutls_alert_get(conn_tls_session);
-+ fprintf(
-+ csync_debug_out,
-+ "SSL: fatal alert received from peer: %d (%s).\n",
-+ alrt, gnutls_alert_get_name(alrt)
-+ );
-+
-+ default:
-+ gnutls_bye(conn_tls_session, GNUTLS_SHUT_RDWR);
-+ gnutls_deinit(conn_tls_session);
-+ gnutls_certificate_free_credentials(conn_x509_cred);
-+ gnutls_global_deinit();
-+
-+ csync_fatal(
-+ "SSL: handshake failed: %s (%s)\n",
-+ gnutls_strerror(err),
-+ gnutls_strerror_name(err)
-+ );
-+ }
-
- csync_conn_usessl = 1;
-
-@@ -155,15 +217,15 @@ int conn_activate_ssl(int server_role)
-
- int conn_check_peer_cert(const char *peername, int callfatal)
- {
-- const X509 *peercert;
-+ const gnutls_datum_t *peercerts;
-+ unsigned npeercerts;
- int i, cert_is_ok = -1;
-
- if (!csync_conn_usessl)
- return 1;
-
-- peercert = SSL_get_peer_certificate(conn_ssl);
--
-- if (!peercert || peercert->size <= 0) {
-+ peercerts = gnutls_certificate_get_peers(conn_tls_session, &npeercerts);
-+ if(peercerts == NULL || npeercerts == 0) {
- if (callfatal)
- csync_fatal("Peer did not provide an SSL X509 cetrificate.\n");
- csync_debug(1, "Peer did not provide an SSL X509 cetrificate.\n");
-@@ -171,11 +233,11 @@ int conn_check_peer_cert(const char *pee
- }
-
- {
-- char certdata[peercert->size*2 + 1];
-+ char certdata[2*peercerts[0].size + 1];
-
-- for (i=0; isize; i++)
-- sprintf(certdata+i*2, "%02X", peercert->data[i]);
-- certdata[peercert->size*2] = 0;
-+ for (i=0; inext) {
-Index: csync2-1.34/m4/libgnutls.m4
-===================================================================
---- /dev/null
-+++ csync2-1.34/m4/libgnutls.m4
-@@ -0,0 +1,173 @@
-+dnl Autoconf macros for libgnutls
-+dnl $id$
-+
-+# Modified for LIBGNUTLS -- nmav
-+# Configure paths for LIBGCRYPT
-+# Shamelessly stolen from the one of XDELTA by Owen Taylor
-+# Werner Koch 99-12-09
-+# 10-years-old code is not as good as brandy would...
-+# gnutls now uses pkg-config and doesn't ship gnutls-config anymore.
-+# Giampaolo Tomassoni 2009-09-15
-+
-+dnl AM_PATH_LIBGNUTLS([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]])
-+dnl Test for libgnutls, and define LIBGNUTLS_CFLAGS and LIBGNUTLS_LIBS
-+dnl
-+AC_DEFUN([AM_PATH_LIBGNUTLS],
-+[dnl
-+dnl Get the cflags and libraries from the libgnutls-config script
-+dnl
-+AC_ARG_WITH(libgnutls-prefix,
-+ [ --with-libgnutls-prefix=PFX Prefix where libgnutls is installed (optional)],
-+ libgnutls_config_prefix="$withval", libgnutls_config_prefix="")
-+
-+ min_libgnutls_version=ifelse([$1], ,0.1.0,$1)
-+ AC_MSG_CHECKING(for libgnutls - version >= $min_libgnutls_version)
-+
-+ PKG_CHECK_EXISTS(
-+ gnutls,
-+ [
-+ LIBGNUTLS_CFLAGS=`$PKG_CONFIG --cflags gnutls`
-+ LIBGNUTLS_LIBS=`$PKG_CONFIG --libs gnutls`
-+ libgnutls_config_version=`$PKG_CONFIG --modversion gnutls`
-+ ],
-+ [
-+ AC_PATH_PROG(LIBGNUTLS_CONFIG, libgnutls-config,, [$libgnutls_config_prefix/bin$PATH_SEPARATOR$PATH])
-+ if test "$LIBGNUTLS_CONFIG"=no
-+ then
-+ no_libgnutls=yes
-+ echo "Can't obtain gnutls package info!" >&2
-+ fi
-+
-+ LIBGNUTLS_CFLAGS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --cflags`
-+ LIBGNUTLS_LIBS=`$LIBGNUTLS_CONFIG $libgnutls_config_args --libs`
-+ libgnutls_config_version=`$LIBGNUTLS_CONFIG $libgnutls_config_args --version`
-+ ]
-+ )
-+
-+ if test "$no_libgnutls" != no
-+ then
-+ ac_save_CFLAGS="$CFLAGS"
-+ ac_save_LIBS="$LIBS"
-+ CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
-+ LIBS="$LIBS $LIBGNUTLS_LIBS"
-+
-+dnl
-+dnl Now check if the installed libgnutls is sufficiently new. Also sanity
-+dnl checks the results of libgnutls-config to some extent
-+dnl
-+ rm -f conf.libgnutlstest
-+ AC_TRY_RUN([
-+#include
-+#include
-+#include
-+#include
-+
-+int
-+main ()
-+{
-+ system ("touch conf.libgnutlstest");
-+
-+ if( strcmp( gnutls_check_version(NULL), "$libgnutls_config_version" ) )
-+ {
-+ printf("\n*** 'libgnutls-config --version' returned %s, but LIBGNUTLS (%s)\n",
-+ "$libgnutls_config_version", gnutls_check_version(NULL) );
-+ printf("*** was found! If libgnutls-config was correct, then it is best\n");
-+ printf("*** to remove the old version of LIBGNUTLS. You may also be able to fix the error\n");
-+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-+ printf("*** required on your system.\n");
-+ printf("*** If libgnutls-config was wrong, set the environment variable LIBGNUTLS_CONFIG\n");
-+ printf("*** to point to the correct copy of libgnutls-config, and remove the file config.cache\n");
-+ printf("*** before re-running configure\n");
-+ }
-+ else if ( strcmp(gnutls_check_version(NULL), LIBGNUTLS_VERSION ) )
-+ {
-+ printf("\n*** LIBGNUTLS header file (version %s) does not match\n", LIBGNUTLS_VERSION);
-+ printf("*** library (version %s)\n", gnutls_check_version(NULL) );
-+ }
-+ else
-+ {
-+ if ( gnutls_check_version( "$min_libgnutls_version" ) )
-+ {
-+ return 0;
-+ }
-+ else
-+ {
-+ printf("no\n*** An old version of LIBGNUTLS (%s) was found.\n",
-+ gnutls_check_version(NULL) );
-+ printf("*** You need a version of LIBGNUTLS newer than %s. The latest version of\n",
-+ "$min_libgnutls_version" );
-+ printf("*** LIBGNUTLS is always available from ftp://gnutls.hellug.gr/pub/gnutls.\n");
-+ printf("*** \n");
-+ printf("*** If you have already installed a sufficiently new version, this error\n");
-+ printf("*** probably means that the wrong copy of the libgnutls-config shell script is\n");
-+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
-+ printf("*** of LIBGNUTLS, but you can also set the LIBGNUTLS_CONFIG environment to point to the\n");
-+ printf("*** correct copy of libgnutls-config. (In this case, you will have to\n");
-+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-+ printf("*** so that the correct libraries are found at run-time))\n");
-+ }
-+ }
-+ return 1;
-+}
-+],, no_libgnutls=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-+ CFLAGS="$ac_save_CFLAGS"
-+ LIBS="$ac_save_LIBS"
-+ fi
-+
-+ if test "x$no_libgnutls" = x ; then
-+ AC_MSG_RESULT(yes)
-+ ifelse([$2], , :, [$2])
-+
-+ AC_DEFINE([HAVE_LIBGNUTLS], [1], [Define to 1 if you have the `gnutls' library (-lgnutls).])
-+ else
-+ if test -f conf.libgnutlstest ; then
-+ :
-+ else
-+ AC_MSG_RESULT(no)
-+ fi
-+ if test "$LIBGNUTLS_CONFIG" = "no" ; then
-+ echo "*** The libgnutls-config script installed by LIBGNUTLS could not be found"
-+ echo "*** If LIBGNUTLS was installed in PREFIX, make sure PREFIX/bin is in"
-+ echo "*** your path, or set the LIBGNUTLS_CONFIG environment variable to the"
-+ echo "*** full path to libgnutls-config."
-+ else
-+ if test -f conf.libgnutlstest ; then
-+ :
-+ else
-+ echo "*** Could not run libgnutls test program, checking why..."
-+ CFLAGS="$CFLAGS $LIBGNUTLS_CFLAGS"
-+ LIBS="$LIBS $LIBGNUTLS_LIBS"
-+ AC_TRY_LINK([
-+#include
-+#include
-+#include
-+#include
-+], [ return !!gnutls_check_version(NULL); ],
-+ [ echo "*** The test program compiled, but did not run. This usually means"
-+ echo "*** that the run-time linker is not finding LIBGNUTLS or finding the wrong"
-+ echo "*** version of LIBGNUTLS. If it is not finding LIBGNUTLS, you'll need to set your"
-+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
-+ echo "*** is required on your system"
-+ echo "***"
-+ echo "*** If you have an old version installed, it is best to remove it, although"
-+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-+ echo "***" ],
-+ [ echo "*** The test program failed to compile or link. See the file config.log for the"
-+ echo "*** exact error that occured. This usually means LIBGNUTLS was incorrectly installed"
-+ echo "*** or that you have moved LIBGNUTLS since it was installed. In the latter case, you"
-+ echo "*** may want to edit the libgnutls-config script: $LIBGNUTLS_CONFIG" ])
-+ CFLAGS="$ac_save_CFLAGS"
-+ LIBS="$ac_save_LIBS"
-+ fi
-+ fi
-+ LIBGNUTLS_CFLAGS=""
-+ LIBGNUTLS_LIBS=""
-+ ifelse([$3], , :, [$3])
-+ fi
-+
-+ rm -f conf.libgnutlstest
-+ AC_SUBST(LIBGNUTLS_CFLAGS)
-+ AC_SUBST(LIBGNUTLS_LIBS)
-+])
-Index: csync2-1.34/update.c
-===================================================================
---- csync2-1.34.orig/update.c
-+++ csync2-1.34/update.c
-@@ -70,7 +70,7 @@ int connect_to_host(const char *peername
- if ( conn_open(peername) ) return -1;
-
- if ( use_ssl ) {
--#if HAVE_LIBGNUTLS_OPENSSL
-+#if HAVE_LIBGNUTLS
- conn_printf("SSL\n");
- if ( read_conn_status(0, peername) ) {
- csync_debug(1, "SSL command failed.\n");
diff --git a/csync2-1.34.tar.gz b/csync2-1.34.tar.gz
deleted file mode 100644
index c0e0c3b..0000000
--- a/csync2-1.34.tar.gz
+++ /dev/null
@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:32b250dd4a0353f71015c5c3961174b975dd5e799e4a084e8f6d00792bd8c833
-size 222765
diff --git a/csync2-2.0+git.1368794815.cf835a7.tar.bz2 b/csync2-2.0+git.1368794815.cf835a7.tar.bz2
new file mode 100644
index 0000000..9f3abd3
--- /dev/null
+++ b/csync2-2.0+git.1368794815.cf835a7.tar.bz2
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:e9613f71d49c15b3b4b1d4d747f0bc9f397ff0823dd9daaf2743ab93bd298781
+size 91654
diff --git a/csync2-README.quickstart b/csync2-README.quickstart
index f08ad79..274ea3f 100644
--- a/csync2-README.quickstart
+++ b/csync2-README.quickstart
@@ -36,7 +36,12 @@ and the connection will fail. To remove the old key from an existing node's
cache, run the following command on each existing node:
csync2-rm-ssl-cert
-The csync2 service is disabled by default. To start it on both your hosts :
+The csync2 service is disabled by default. To start it on both your hosts
+using systemd (preferred):
+ systemctl enable csync2.socket
+ systemctl start csync2.socket
+
+If you would prefer to do it the old way with xinetd, run:
chkconfig csync2 on
chkconfig --level 345 xinetd on
service xinetd restart
diff --git a/csync2-fix-xinetd.patch b/csync2-fix-xinetd.patch
index 3782eb6..67e9559 100644
--- a/csync2-fix-xinetd.patch
+++ b/csync2-fix-xinetd.patch
@@ -1,15 +1,17 @@
---- csync2-1.33/csync2.xinetd.fix-xinetd 2007-01-24 21:18:04.000000000 +0100
-+++ csync2-1.33/csync2.xinetd 2007-01-24 21:19:47.000000000 +0100
+Index: csync2-2.0+git.1368794815.cf835a7/csync2.xinetd
+===================================================================
+--- csync2-2.0+git.1368794815.cf835a7.orig/csync2.xinetd
++++ csync2-2.0+git.1368794815.cf835a7/csync2.xinetd
@@ -1,4 +1,4 @@
-# default: on
+# default: off
# description: csync2
service csync2
{
-@@ -9,7 +9,9 @@
+@@ -9,7 +9,9 @@ service csync2
group = root
server = /usr/sbin/csync2
- server_args = -i
+ server_args = -i -l
+ port = 30865
+ type = UNLISTED
#log_on_failure += USERID
diff --git a/csync2-rm-ssl-cert b/csync2-rm-ssl-cert
index cf8143a..ac08a6d 100644
--- a/csync2-rm-ssl-cert
+++ b/csync2-rm-ssl-cert
@@ -15,7 +15,7 @@ END
exit 0
fi
-DBFILE=/var/lib/csync2/$(hostname).db
+DBFILE=/var/lib/csync2/$(hostname).db3
if [ ! -f "$DBFILE" ]; then
echo "Local csync2 database ($DBFILE) not found."
exit 1
@@ -26,7 +26,7 @@ PEERNAME=$(echo $1 | sed -e "s/['\"]//g")
certcount()
{
- echo "SELECT COUNT(peername) FROM x509_cert WHERE peername='$1';" | sqlite $DBFILE
+ echo "SELECT COUNT(peername) FROM x509_cert WHERE peername='$1';" | sqlite3 $DBFILE
}
if [ $(certcount "$PEERNAME") -eq 0 ]; then
@@ -34,7 +34,7 @@ if [ $(certcount "$PEERNAME") -eq 0 ]; then
exit 0
fi
-echo "DELETE FROM x509_cert WHERE peername='$PEERNAME';" | sqlite $DBFILE
+echo "DELETE FROM x509_cert WHERE peername='$PEERNAME';" | sqlite3 $DBFILE
if [ $(certcount "$PEERNAME") -ne 0 ]; then
echo "Error removing certificate for '$PEERNAME' from local database."
diff --git a/csync2.changes b/csync2.changes
index 041b5ac..3ea0d0b 100644
--- a/csync2.changes
+++ b/csync2.changes
@@ -1,3 +1,31 @@
+-------------------------------------------------------------------
+Thu Sep 26 09:07:40 UTC 2013 - tserong@suse.com
+
+- Ensure COPYING file is included in package
+ + Added add-COPYING.patch
+
+-------------------------------------------------------------------
+Wed Sep 11 05:12:22 UTC 2013 - tserong@suse.com
+
+- Update to upstream version 2.0-rc2. Changes since 1.34 too numerous
+ to list, but include:
+ + Database abstraction layer (default build uses sqlite3)
+ + IPv6 support
+ + Native GnuTLS support
+ + tempdir and lock-timeout config options
+ + do-local-only config option for actions
+- Reworked patches and extra source being carried in openSUSE:
+ + Added csync2.socket and csync2@.service for use via systemd
+ + Added add-ac_prog_cpp.patch
+ + Added fix-csync2_ssl_cert-filename.patch
+ + Added fix-sonames.patch
+ + Updated csync2-fix-xinetd.patch
+ + Updated README.quickstart
+ + Removed fix-missing-sentinels.diff (upstream)
+ + Removed csync2-1.34-pure-gnutls-r2.patch (obsolete)
+ + Removed force-debug-stderr-off-inetd.patch (obsolete)
+ + Removed bind-to-local-hostname.patch (obsolete)
+
-------------------------------------------------------------------
Fri May 10 12:56:38 UTC 2013 - tserong@suse.com
diff --git a/csync2.socket b/csync2.socket
new file mode 100644
index 0000000..80d7190
--- /dev/null
+++ b/csync2.socket
@@ -0,0 +1,6 @@
+[Socket]
+ListenStream=30865
+Accept=yes
+
+[Install]
+WantedBy=sockets.target
diff --git a/csync2.spec b/csync2.spec
index 0ba028f..d8f8620 100644
--- a/csync2.spec
+++ b/csync2.spec
@@ -17,75 +17,94 @@
Summary: Cluster synchronization tool
-License: GPL-2.0+ and LGPL-2.1+
+License: GPL-2.0+
Group: Productivity/Clustering/HA
Name: csync2
-Version: 1.34
+Version: 2.0+git.1368794815.cf835a7
Release: 0
Url: http://oss.linbit.com/csync2/
-Source0: http://oss.linbit.com/csync2/%{name}-%{version}.tar.gz
+#Source0: http://oss.linbit.com/csync2/%{name}-%{version}.tar.gz
+Source0: %{name}-%{version}.tar.bz2
Source1: csync2-README.quickstart
Source2: csync2-rm-ssl-cert
+Source3: csync2.socket
+Source4: csync2@.service
+# PATCH-FIX-UPSTREAM -- csync2-fix-xinetd.patch tserong@suse.com -- disables csync2 in xinetd by default, fixes port.
Patch0: csync2-fix-xinetd.patch
-Patch1: fix-missing-sentinels.diff
-%if 0%{?suse_version} > 1120
-Patch2: csync2-1.34-pure-gnutls-r2.patch
-BuildRequires: pkg-config
-%endif
-Patch3: force-debug-stderr-off-inetd.patch
-Patch4: bind-to-local-hostname.patch
-BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Requires(post): openssl
-Requires: gnutls
-Requires: sqlite2
-Requires: xinetd
+# PATCH-FIX-UPSTREAM -- add-ac_prog_cpp.patch tserong@suse.com -- fix ugly ./configure warnings about missing headers
+Patch10: add-ac_prog_cpp.patch
+# PATCH-FIX-UPSTREAM -- fix-csync2_ssl_cert-filename.patch tserong@suse.com -- correct csync2 ssl cert filename
+Patch11: fix-csync2_ssl_cert-filename.patch
+# PATCH-FIX-UPSTREAM -- fix-sonames.patch tserong@suse.com -- use properly versioned sonames in dlopen()
+Patch12: fix-sonames.patch
+# PATCH-FIX-UPSTREAM -- add-COPYING.patch tserong@suse.com -- ensure COPYING is present in docfiles and thus %doc
+Patch13: add-COPYING.patch
+
+BuildRequires: autoconf
+BuildRequires: automake
BuildRequires: bison
BuildRequires: flex
BuildRequires: libgnutls-devel
-%if 0%{?sles_version} == 11
-BuildRequires: libgnutls-extra-devel
-%endif
-BuildRequires: libtasn1-devel
-BuildRequires: sqlite2-devel
-%if 0%{?suse_version} > 1210
BuildRequires: librsync-devel
-%else
-BuildRequires: librsync
+# openssl required at build time due to rpmlint checks which run postinstall script which uses openssl
+BuildRequires: openssl
+BuildRequires: pkgconfig
+BuildRequires: sqlite3-devel
+Requires: openssl
+Requires: sqlite3
+%{?systemd_requires}
+%if 0%{?suse_version} >= 1210
+BuildRequires: systemd
%endif
+# texlive is for pdflatex to build PDF version of the manual
+BuildRequires: texlive-latex
+BuildRequires: texlive-nopageno
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-build
%description
-Csync2 is a cluster synchronization tool. It can be used to keep files
-on multiple hosts in a cluster in sync. Csync2 can handle complex
-setups with much more than just 2 hosts, handle file deletions and can
-detect conflicts. It is expedient for HA-clusters, HPC-clusters, COWs
-and server farms.
+Csync2 is a cluster synchronization tool. It can be used to keep files on
+multiple hosts in a cluster in sync. Csync2 can handle complex setups with
+much more than just 2 hosts, handle file deletions and can detect conflicts.
+It is expedient for HA-clusters, HPC-clusters, COWs and server farms.
%prep
%setup -q
-%patch0 -p1 -b .fix-xinetd
-%patch1 -p1
-%if 0%{?suse_version} > 1120
-%patch2 -p1
-%endif
-%patch3 -p1
-%patch4 -p1
-install -p -m 644 %{SOURCE1} README.quickstart
+%{?suse_update_config:%{suse_update_config}}
+
+%patch0 -p1
+%patch10 -p1
+%patch11 -p1
+%patch12 -p1
+%patch13 -p1
%build
-%configure --sysconfdir=%{_sysconfdir}/csync2
+export CFLAGS="%{optflags}"
+if ! [ -f configure ]; then ./autogen.sh; fi
+%configure --enable-sqlite3 \
+ --sysconfdir=%{_sysconfdir}/csync2 --docdir=%{_docdir}/%{name}
+
make %{?_smp_mflags}
%install
-make install DESTDIR=%{buildroot}
-mkdir -p %{buildroot}%{_var}/lib/csync2
+%make_install
+mkdir -p %{buildroot}%{_localstatedir}/lib/csync2
install -p -D -m 644 csync2.xinetd %{buildroot}%{_sysconfdir}/xinetd.d/csync2
+install -p -m 644 %{SOURCE1} %{buildroot}%{_docdir}/%{name}/README.quickstart
install -p -m 755 %{SOURCE2} %{buildroot}%{_sbindir}/csync2-rm-ssl-cert
+mkdir -p %{buildroot}%{_unitdir}
+install -p -m 644 %{SOURCE3} %{buildroot}%{_unitdir}/
+install -p -m 644 %{SOURCE4} %{buildroot}%{_unitdir}/
# We need these empty files to be able to %%ghost them
touch %{buildroot}%{_sysconfdir}/csync2/csync2_ssl_key.pem
touch %{buildroot}%{_sysconfdir}/csync2/csync2_ssl_cert.pem
+%pre
+%service_add_pre csync2.socket
+
%post
+%service_add_post csync2.socket
umask 077
if [ ! -f %{_sysconfdir}/csync2/csync2_ssl_key.pem ]; then
/usr/bin/openssl genrsa -rand /proc/apm:/proc/cpuinfo:/proc/dma:/proc/filesystems:/proc/interrupts:/proc/ioports:/proc/pci:/proc/rtc:/proc/uptime 1024 > %{_sysconfdir}/csync2/csync2_ssl_key.pem 2>/dev/null
@@ -107,23 +126,30 @@ EOF
fi
%preun
+%service_del_preun csync2.socket
# Cleanup all databases upon last removal
if [ $1 -eq 0 ]; then
- %{__rm} -f %{_var}/lib/csync2/*
+ rm -f %{_localstatedir}/lib/csync2/*
fi
+%postun
+%service_del_postun csync2.socket
+
%files
-%defattr(-,root,root,-)
-%doc README README.quickstart AUTHORS COPYING paper.pdf
+%defattr(-,root,root)
+%{_sbindir}/csync2
+%{_sbindir}/csync2-compare
+%{_unitdir}/csync2.socket
+%{_unitdir}/csync2@.service
+%dir %{_localstatedir}/lib/csync2/
+# Using docdir here ensures correct doc file tagging
+%{_docdir}/%{name}
%dir %{_sysconfdir}/csync2/
%config(noreplace) %{_sysconfdir}/csync2/csync2.cfg
%config(noreplace) %{_sysconfdir}/xinetd.d/csync2
%ghost %config %{_sysconfdir}/csync2/csync2_ssl_key.pem
%ghost %config %{_sysconfdir}/csync2/csync2_ssl_cert.pem
-%{_sbindir}/csync2
-%{_sbindir}/csync2-compare
%{_sbindir}/csync2-rm-ssl-cert
%{_mandir}/man1/csync2.1*
-%dir %{_var}/lib/csync2/
%changelog
diff --git a/csync2@.service b/csync2@.service
new file mode 100644
index 0000000..83d9176
--- /dev/null
+++ b/csync2@.service
@@ -0,0 +1,9 @@
+[Unit]
+Description=csync2 connection handler
+After=syslog.target
+
+[Service]
+ExecStart=-/usr/sbin/csync2 -i -v
+StandardInput=socket
+StandardOutput=socket
+
diff --git a/fix-csync2_ssl_cert-filename.patch b/fix-csync2_ssl_cert-filename.patch
new file mode 100644
index 0000000..6e69aa7
--- /dev/null
+++ b/fix-csync2_ssl_cert-filename.patch
@@ -0,0 +1,21 @@
+commit 456732b
+Author: Tim Serong
+Date: Mon Sep 2 16:50:27 2013 +1000
+
+ Fix typo in csync2_ssl_cert.pem filename
+
+ Signed-off-by: Tim Serong
+
+diff --git a/conn.c b/conn.c
+index 2b3611d..5e54693 100644
+--- a/conn.c
++++ b/conn.c
+@@ -281,7 +281,7 @@ int conn_activate_ssl(int server_role)
+ return 0;
+
+ ASPRINTF(&ssl_keyfile, "%s/csync2_ssl_key.pem", systemdir);
+- ASPRINTF(&ssl_certfile, "%s/csync_ssl_cert.pem", systemdir);
++ ASPRINTF(&ssl_certfile, "%s/csync2_ssl_cert.pem", systemdir);
+
+ gnutls_global_init();
+ gnutls_global_set_log_function(ssl_log);
diff --git a/fix-missing-sentinels.diff b/fix-missing-sentinels.diff
deleted file mode 100644
index a927050..0000000
--- a/fix-missing-sentinels.diff
+++ /dev/null
@@ -1,13 +0,0 @@
-Index: action.c
-===================================================================
---- csync2-1.34/action.c 2007-07-25 05:04:18.000000000 +0800
-+++ csync2-1.34/action.c 2009-12-04 17:51:47.000000000 +0800
-@@ -107,7 +107,7 @@
- /* 1 */ open(logfile_clr, O_WRONLY|O_CREAT|O_APPEND, 0666);
- /* 2 */ open(logfile_clr, O_WRONLY|O_CREAT|O_APPEND, 0666);
-
-- execl("/bin/sh", "sh", "-c", real_command, 0);
-+ execl("/bin/sh", "sh", "-c", real_command, NULL);
- _exit(127);
- }
-
diff --git a/fix-sonames.patch b/fix-sonames.patch
new file mode 100644
index 0000000..ba0b555
--- /dev/null
+++ b/fix-sonames.patch
@@ -0,0 +1,104 @@
+Index: csync2-2.0+git.1368794815.cf835a7/db_mysql.c
+===================================================================
+--- csync2-2.0+git.1368794815.cf835a7.orig/db_mysql.c
++++ csync2-2.0+git.1368794815.cf835a7/db_mysql.c
+@@ -53,16 +53,16 @@ static void *dl_handle;
+
+ static void db_mysql_dlopen(void)
+ {
+- csync_debug(2, "Opening shared library libmysqlclient.so\n");
+- dl_handle = dlopen("libmysqlclient.so", RTLD_LAZY);
++ csync_debug(2, "Opening shared library libmysqlclient.so.18\n");
++ dl_handle = dlopen("libmysqlclient.so.18", RTLD_LAZY);
+ if (dl_handle == NULL) {
+ csync_fatal
+- ("Could not open libmysqlclient.so: %s\n"
++ ("Could not open libmysqlclient.so.18: %s\n"
+ "Please install Mysql client library (libmysqlclient) or use other database (sqlite, postgres)\n",
+ dlerror());
+ }
+
+- csync_debug(2, "Reading symbols from shared library libmysqlclient.so\n");
++ csync_debug(2, "Reading symbols from shared library libmysqlclient.so.18\n");
+
+ LOOKUP_SYMBOL(dl_handle, mysql_init);
+ LOOKUP_SYMBOL(dl_handle, mysql_real_connect);
+Index: csync2-2.0+git.1368794815.cf835a7/db_postgres.c
+===================================================================
+--- csync2-2.0+git.1368794815.cf835a7.orig/db_postgres.c
++++ csync2-2.0+git.1368794815.cf835a7/db_postgres.c
+@@ -58,16 +58,16 @@ static void *dl_handle;
+
+ static void db_postgres_dlopen(void)
+ {
+- csync_debug(2, "Opening shared library libpq.so\n");
++ csync_debug(2, "Opening shared library libpq.so.5\n");
+
+- dl_handle = dlopen("libpq.so", RTLD_LAZY);
++ dl_handle = dlopen("libpq.so.5", RTLD_LAZY);
+ if (dl_handle == NULL) {
+ csync_fatal
+- ("Could not open libpq.so: %s\n"
++ ("Could not open libpq.so.5: %s\n"
+ "Please install postgres client library (libpg) or use other database (sqlite, mysql)\n",
+ dlerror());
+ }
+- csync_debug(2, "Reading symbols from shared library libpq.so\n");
++ csync_debug(2, "Reading symbols from shared library libpq.so.5\n");
+
+ LOOKUP_SYMBOL(dl_handle, PQconnectdb);
+ LOOKUP_SYMBOL(dl_handle, PQstatus);
+Index: csync2-2.0+git.1368794815.cf835a7/db_sqlite.c
+===================================================================
+--- csync2-2.0+git.1368794815.cf835a7.orig/db_sqlite.c
++++ csync2-2.0+git.1368794815.cf835a7/db_sqlite.c
+@@ -56,16 +56,16 @@ static void *dl_handle;
+
+ static void db_sqlite3_dlopen(void)
+ {
+- csync_debug(2, "Opening shared library libsqlite3.so\n");
++ csync_debug(2, "Opening shared library libsqlite3.so.0\n");
+
+- dl_handle = dlopen("libsqlite3.so", RTLD_LAZY);
++ dl_handle = dlopen("libsqlite3.so.0", RTLD_LAZY);
+ if (dl_handle == NULL) {
+ csync_fatal
+- ("Could not open libsqlite3.so: %s\n"
++ ("Could not open libsqlite3.so.0: %s\n"
+ "Please install sqlite3 client library (libsqlite3) or use other database (postgres, mysql)\n",
+ dlerror());
+ }
+- csync_debug(2, "Reading symbols from shared library libsqlite3.so\n");
++ csync_debug(2, "Reading symbols from shared library libsqlite3.so.0\n");
+
+ LOOKUP_SYMBOL(dl_handle, sqlite3_open);
+ LOOKUP_SYMBOL(dl_handle, sqlite3_close);
+Index: csync2-2.0+git.1368794815.cf835a7/db_sqlite2.c
+===================================================================
+--- csync2-2.0+git.1368794815.cf835a7.orig/db_sqlite2.c
++++ csync2-2.0+git.1368794815.cf835a7/db_sqlite2.c
+@@ -54,20 +54,17 @@ static void *dl_handle;
+
+ static void db_sqlite_dlopen(void)
+ {
+- csync_debug(2, "Opening shared library libsqlite.so\n");
++ csync_debug(2, "Opening shared library libsqlite.so.0\n");
+
+- dl_handle = dlopen("libsqlite.so", RTLD_LAZY);
++ dl_handle = dlopen("libsqlite.so.0", RTLD_LAZY);
+ if (dl_handle == NULL) {
+- csync_debug(1, "Libsqlite.so not found, trying libsqlite.so.0\n");
+- dl_handle = dlopen("libsqlite.so.0", RTLD_LAZY);
+- if (dl_handle == NULL) {
+ csync_fatal
+- ("Could not open libsqlite.so: %s\n"
++ ("Could not open libsqlite.so.0: %s\n"
+ "Please install sqlite client library (libsqlite) or use other database (postgres, mysql)\n",
+ dlerror());
+ }
+ }
+- csync_debug(2, "Opening shared library libsqlite.so\n");
++ csync_debug(2, "Opening shared library libsqlite.so.0\n");
+
+ LOOKUP_SYMBOL(dl_handle, sqlite_open);
+ LOOKUP_SYMBOL(dl_handle, sqlite_close);
diff --git a/force-debug-stderr-off-inetd.patch b/force-debug-stderr-off-inetd.patch
deleted file mode 100644
index b0ee06d..0000000
--- a/force-debug-stderr-off-inetd.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-Index: csync2-1.34/csync2.c
-===================================================================
---- csync2-1.34.orig/csync2.c
-+++ csync2-1.34/csync2.c
-@@ -458,6 +458,16 @@ int main(int argc, char ** argv)
- for (i=0; myhostname[i]; i++)
- myhostname[i] = tolower(myhostname[i]);
-
-+ if ( mode == MODE_INETD ) {
-+ /* Force debug level below zero when running under inetd,
-+ * else stderr junk may be emitted back to some other host
-+ * which breaks the protocol. One case is where a target
-+ * directory does not exist resulting in allegations of
-+ * I/O error during rsync write (bnc#752563)
-+ */
-+ csync_debug_level = -1;
-+ }
-+
- /* Stand-alone server mode. This is a hack..
- */
- if ( mode == MODE_SERVER || mode == MODE_SINGLE ) {