Accepting request 522138 from network
- Updated to 17.08(bsc#1050250, bsc#1046598, fate#322913, fate#322608)
Some of the new features are listed below:
* Increase minimum x86 ISA version to SSE4.2
* Added Fail-Safe PMD
* Added support for generic flow API (rte_flow) on igb NICs
* Added support for generic flow API (rte_flow) on enic
* Added support for Chelsio T6 family of adapters
* Added latency and performance improvements for cxgbe
* Updated mlx5 driver
* Added NXP DPAA2 Eventdev PMD
* Added dpdk-test-eventdev test application
* from 17.05:
* Added mbuf raw free API
* Added free Tx mbuf on demand API
* Added VFIO hotplug support
* Added PowerPC support for i40e and its vector PMD
* Added VF max bandwidth setting in i40e
* Added LiquidIO network PMD
* Added support for NXP DPAA2 Network PMD
* Added support for NXP DPAA2 - FSLMC bus
* Added support for the Wind River Systems AVP PMD
* Added vmxnet3 version 3 support
* Added MTU feature support to Virtio and Vhost
* Added event driven programming model library (rte_eventdev)
* Added Software Eventdev PMD
* Added Cavium OCTEONTX Eventdev PMD
* Added NXP DPAA2 SEC crypto PMD
* from 17.02:
* Added generic EAL API for I/O device memory read/write operations
* Added VF Daemon (VFD) for i40e. - EXPERIMENTAL
* Added generic flow API (rte_flow)
* Added APIs for MACsec offload support to the ixgbe PMD
* Added Solarflare libefx-based network PMD.
* Added support for Mellanox ConnectX-5 adapters (mlx5)
* Added ARMv8 crypto PMD
* Added crypto performance test application
* more details can be found in
http://dpdk.org/doc/guides/rel_notes/release_17_08.html
http://dpdk.org/doc/guides/rel_notes/release_17_05.html
http://dpdk.org/doc/guides/rel_notes/release_17_02.html
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
-0005-kni-fix-build-with-gcc-7.1.patch
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
-0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
- Use updated patch to enable HAVE_TRANS_START_HELPER for SLE12SP3(bsc#1031705).
[+ 0002-kni-fix-build-on-SLE12-SP3.patch]
- Enabled CONFIG_RTE_MAJOR_ABI: libs SONAME equal the DPDK release version
- Split libs into a subpackage to provide multiple installable versions on same sytem
- Updated to 17.08(bsc#1050250, bsc#1046598, fate#322913, fate#322608)
Some of the new features are listed below:
* Increase minimum x86 ISA version to SSE4.2
* Added Fail-Safe PMD
* Added support for generic flow API (rte_flow) on igb NICs
* Added support for generic flow API (rte_flow) on enic
* Added support for Chelsio T6 family of adapters
* Added latency and performance improvements for cxgbe
* Updated mlx5 driver
* Added NXP DPAA2 Eventdev PMD
* Added dpdk-test-eventdev test application
* from 17.05:
* Added mbuf raw free API
* Added free Tx mbuf on demand API
* Added VFIO hotplug support
* Added PowerPC support for i40e and its vector PMD
* Added VF max bandwidth setting in i40e
* Added LiquidIO network PMD
* Added support for NXP DPAA2 Network PMD
* Added support for NXP DPAA2 - FSLMC bus
* Added support for the Wind River Systems AVP PMD
* Added vmxnet3 version 3 support
* Added MTU feature support to Virtio and Vhost
* Added event driven programming model library (rte_eventdev)
* Added Software Eventdev PMD
* Added Cavium OCTEONTX Eventdev PMD
* Added NXP DPAA2 SEC crypto PMD
* from 17.02:
* Added generic EAL API for I/O device memory read/write operations
* Added VF Daemon (VFD) for i40e. - EXPERIMENTAL
* Added generic flow API (rte_flow)
* Added APIs for MACsec offload support to the ixgbe PMD
* Added Solarflare libefx-based network PMD.
* Added support for Mellanox ConnectX-5 adapters (mlx5)
* Added ARMv8 crypto PMD
* Added crypto performance test application
* more details can be found in
http://dpdk.org/doc/guides/rel_notes/release_17_08.html
http://dpdk.org/doc/guides/rel_notes/release_17_05.html
http://dpdk.org/doc/guides/rel_notes/release_17_02.html
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
-0005-kni-fix-build-with-gcc-7.1.patch
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
-0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
- Use updated patch to enable HAVE_TRANS_START_HELPER for SLE12SP3(bsc#1031705).
[+ 0002-kni-fix-build-on-SLE12-SP3.patch]
- Enabled CONFIG_RTE_MAJOR_ABI: libs SONAME equal the DPDK release version
- Split libs into a subpackage to provide multiple installable versions on same sytem
OBS-URL: https://build.opensuse.org/request/show/522138
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/dpdk?expand=0&rev=19
This commit is contained in:
Dominique Leuenberger
Git OBS Bridge
commit
723bdd9601
@ -1,33 +0,0 @@
|
|||||||
From e6b63f9d941c8b27c4c1cbeab2c7cdbefb7747ba Mon Sep 17 00:00:00 2001
|
|
||||||
From: Nirmoy Das <ndas@suse.de>
|
|
||||||
Date: Fri, 31 Mar 2017 11:40:42 +0200
|
|
||||||
Subject: [PATCH] kni: define HAVE_VF_VLAN_PROTO for SLES12SP3
|
|
||||||
|
|
||||||
Add support for SLES12SP3, which uses kernel 4.4,
|
|
||||||
but backported features from newer kernels.
|
|
||||||
|
|
||||||
Signed-off-by: Nirmoy Das <ndas@suse.de>
|
|
||||||
---
|
|
||||||
lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h | 6 ++++--
|
|
||||||
1 file changed, 4 insertions(+), 2 deletions(-)
|
|
||||||
|
|
||||||
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
|
|
||||||
index 84826b26e..3d22d8e69 100644
|
|
||||||
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
|
|
||||||
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
|
|
||||||
@@ -3929,8 +3929,10 @@ skb_set_hash(struct sk_buff *skb, __u32 hash, __always_unused int type)
|
|
||||||
#define vlan_tx_tag_present skb_vlan_tag_present
|
|
||||||
#endif
|
|
||||||
|
|
||||||
-#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(4,9,0) )
|
|
||||||
+#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,9,0) ) \
|
|
||||||
+ || (defined(CONFIG_SUSE_KERNEL) && \
|
|
||||||
+ (LINUX_VERSION_CODE >= KERNEL_VERSION(4,4,59))))
|
|
||||||
#define HAVE_VF_VLAN_PROTO
|
|
||||||
-#endif /* >= 4.9.0 */
|
|
||||||
+#endif /* >= 4.9.0, >= SLES12SP3 */
|
|
||||||
|
|
||||||
#endif /* _KCOMPAT_H_ */
|
|
||||||
--
|
|
||||||
2.12.0
|
|
||||||
|
|
||||||
71
0002-kni-fix-build-on-SLE12-SP3.patch
Normal file
71
0002-kni-fix-build-on-SLE12-SP3.patch
Normal file
@ -0,0 +1,71 @@
|
|||||||
|
From d2749a174306f7ddb4259bdeb561761ddff7ca7d Mon Sep 17 00:00:00 2001
|
||||||
|
From: Nirmoy Das <ndas@suse.de>
|
||||||
|
Date: Tue, 29 Aug 2017 16:48:35 +0200
|
||||||
|
Subject: [PATCH v2] kni: fix build on SLE12 SP3
|
||||||
|
MIME-Version: 1.0
|
||||||
|
Content-Type: text/plain; charset=UTF-8
|
||||||
|
Content-Transfer-Encoding: 8bit
|
||||||
|
|
||||||
|
compilation error:
|
||||||
|
build/lib/librte_eal/linuxapp/kni/kni_net.c:215:5: error:
|
||||||
|
‘struct net_device’ has no member named ‘trans_start’
|
||||||
|
dev->trans_start = jiffies;
|
||||||
|
|
||||||
|
Signed-off-by: Nirmoy Das <ndas@suse.de>
|
||||||
|
---
|
||||||
|
lib/librte_eal/linuxapp/kni/compat.h | 32 +++++++++++++++++++++++++++++++-
|
||||||
|
1 file changed, 31 insertions(+), 1 deletion(-)
|
||||||
|
|
||||||
|
diff --git a/lib/librte_eal/linuxapp/kni/compat.h b/lib/librte_eal/linuxapp/kni/compat.h
|
||||||
|
index 6a1587b4e..19f8e96ce 100644
|
||||||
|
--- a/lib/librte_eal/linuxapp/kni/compat.h
|
||||||
|
+++ b/lib/librte_eal/linuxapp/kni/compat.h
|
||||||
|
@@ -8,6 +8,34 @@
|
||||||
|
#define RHEL_RELEASE_VERSION(a, b) (((a) << 8) + (b))
|
||||||
|
#endif
|
||||||
|
|
||||||
|
+/* SuSE version macro is the same as Linux kernel version */
|
||||||
|
+#ifndef SLE_VERSION
|
||||||
|
+#define SLE_VERSION(a, b, c) KERNEL_VERSION(a, b, c)
|
||||||
|
+#endif
|
||||||
|
+#ifdef CONFIG_SUSE_KERNEL
|
||||||
|
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 57))
|
||||||
|
+/* SLES12SP3 is at least 4.4.57+ based */
|
||||||
|
+#define SLE_VERSION_CODE SLE_VERSION(12, 3, 0)
|
||||||
|
+#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 12, 28))
|
||||||
|
+/* SLES12 is at least 3.12.28+ based */
|
||||||
|
+#define SLE_VERSION_CODE SLE_VERSION(12, 0, 0)
|
||||||
|
+#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(3, 0, 61)) && \
|
||||||
|
+ (LINUX_VERSION_CODE < KERNEL_VERSION(3, 1, 0)))
|
||||||
|
+/* SLES11 SP3 is at least 3.0.61+ based */
|
||||||
|
+#define SLE_VERSION_CODE SLE_VERSION(11, 3, 0)
|
||||||
|
+#elif (LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 32))
|
||||||
|
+/* SLES11 SP1 is 2.6.32 based */
|
||||||
|
+#define SLE_VERSION_CODE SLE_VERSION(11, 1, 0)
|
||||||
|
+#elif (LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 27))
|
||||||
|
+/* SLES11 GA is 2.6.27 based */
|
||||||
|
+#define SLE_VERSION_CODE SLE_VERSION(11, 0, 0)
|
||||||
|
+#endif /* LINUX_VERSION_CODE == KERNEL_VERSION(x,y,z) */
|
||||||
|
+#endif /* CONFIG_SUSE_KERNEL */
|
||||||
|
+#ifndef SLE_VERSION_CODE
|
||||||
|
+#define SLE_VERSION_CODE 0
|
||||||
|
+#endif /* SLE_VERSION_CODE */
|
||||||
|
+
|
||||||
|
+
|
||||||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) && \
|
||||||
|
(!(defined(RHEL_RELEASE_CODE) && \
|
||||||
|
RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 4)))
|
||||||
|
@@ -55,7 +83,9 @@
|
||||||
|
|
||||||
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0) || \
|
||||||
|
(defined(RHEL_RELEASE_CODE) && \
|
||||||
|
- RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4))
|
||||||
|
+ RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4)) || \
|
||||||
|
+ (defined(SLE_VERSION_CODE) && \
|
||||||
|
+ SLE_VERSION_CODE == SLE_VERSION(12, 3, 0))
|
||||||
|
#define HAVE_TRANS_START_HELPER
|
||||||
|
#endif
|
||||||
|
|
||||||
|
--
|
||||||
|
2.13.3
|
||||||
|
|
||||||
@ -1,31 +0,0 @@
|
|||||||
From c284b14663fcaa2ab492496921a1fcb691abe764 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Nirmoy Das <ndas@suse.de>
|
|
||||||
Date: Tue, 18 Apr 2017 11:20:48 +0200
|
|
||||||
Subject: [PATCH] kni: define HAVE_TRANS_START_HELPER for SLES12SP3
|
|
||||||
|
|
||||||
Add support for SLES12SP3, which uses kernel 4.4,
|
|
||||||
but backported features from newer kernels.
|
|
||||||
|
|
||||||
Signed-off-by: Nirmoy Das <ndas@suse.de>
|
|
||||||
---
|
|
||||||
lib/librte_eal/linuxapp/kni/compat.h | 4 +++-
|
|
||||||
1 file changed, 3 insertions(+), 1 deletion(-)
|
|
||||||
|
|
||||||
diff --git a/lib/librte_eal/linuxapp/kni/compat.h b/lib/librte_eal/linuxapp/kni/compat.h
|
|
||||||
index 78da08e..f781fd0 100644
|
|
||||||
--- a/lib/librte_eal/linuxapp/kni/compat.h
|
|
||||||
+++ b/lib/librte_eal/linuxapp/kni/compat.h
|
|
||||||
@@ -51,7 +51,9 @@
|
|
||||||
#define HAVE_SK_ALLOC_KERN_PARAM
|
|
||||||
#endif
|
|
||||||
|
|
||||||
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0)
|
|
||||||
+#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0) \
|
|
||||||
+ || (defined(CONFIG_SUSE_KERNEL) && \
|
|
||||||
+ (LINUX_VERSION_CODE >= KERNEL_VERSION(4,4,59))))
|
|
||||||
#define HAVE_TRANS_START_HELPER
|
|
||||||
#endif
|
|
||||||
|
|
||||||
--
|
|
||||||
2.12.2
|
|
||||||
|
|
||||||
@ -1,81 +0,0 @@
|
|||||||
From 2d5a4b62ff2d7b79ca937a5c88654deecf4aa986 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
|
|
||||||
Date: Mon, 20 Mar 2017 19:40:40 +0530
|
|
||||||
Subject: [PATCH] net/thunderx: sync mailbox definitions with Linux PF driver
|
|
||||||
|
|
||||||
- bgx_link_status mbox definition was changed in Linux
|
|
||||||
commit 1cc702591bae ("net: thunderx: Add ethtool support")
|
|
||||||
- NIC_MBOX_MSG_RES_BIT related changes were never part of Linux PF driver
|
|
||||||
|
|
||||||
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
|
|
||||||
---
|
|
||||||
drivers/net/thunderx/base/nicvf_mbox.c | 7 ++-----
|
|
||||||
drivers/net/thunderx/base/nicvf_mbox.h | 11 +++--------
|
|
||||||
2 files changed, 5 insertions(+), 13 deletions(-)
|
|
||||||
|
|
||||||
diff --git a/drivers/net/thunderx/base/nicvf_mbox.c b/drivers/net/thunderx/base/nicvf_mbox.c
|
|
||||||
index 3b7b8a518..8b3477d5f 100644
|
|
||||||
--- a/drivers/net/thunderx/base/nicvf_mbox.c
|
|
||||||
+++ b/drivers/net/thunderx/base/nicvf_mbox.c
|
|
||||||
@@ -62,9 +62,6 @@ static const char *mbox_message[NIC_MBOX_MSG_MAX] = {
|
|
||||||
[NIC_MBOX_MSG_RESET_STAT_COUNTER] = "NIC_MBOX_MSG_RESET_STAT_COUNTER",
|
|
||||||
[NIC_MBOX_MSG_CFG_DONE] = "NIC_MBOX_MSG_CFG_DONE",
|
|
||||||
[NIC_MBOX_MSG_SHUTDOWN] = "NIC_MBOX_MSG_SHUTDOWN",
|
|
||||||
- [NIC_MBOX_MSG_RES_BIT] = "NIC_MBOX_MSG_RES_BIT",
|
|
||||||
- [NIC_MBOX_MSG_RSS_SIZE_RES_BIT] = "NIC_MBOX_MSG_RSS_SIZE",
|
|
||||||
- [NIC_MBOX_MSG_ALLOC_SQS_RES_BIT] = "NIC_MBOX_MSG_ALLOC_SQS",
|
|
||||||
};
|
|
||||||
|
|
||||||
static inline const char * __attribute__((unused))
|
|
||||||
@@ -176,7 +173,7 @@ nicvf_handle_mbx_intr(struct nicvf *nic)
|
|
||||||
case NIC_MBOX_MSG_NACK:
|
|
||||||
nic->pf_nacked = true;
|
|
||||||
break;
|
|
||||||
- case NIC_MBOX_MSG_RSS_SIZE_RES_BIT:
|
|
||||||
+ case NIC_MBOX_MSG_RSS_SIZE:
|
|
||||||
nic->rss_info.rss_size = mbx.rss_size.ind_tbl_size;
|
|
||||||
nic->pf_acked = true;
|
|
||||||
break;
|
|
||||||
@@ -186,7 +183,7 @@ nicvf_handle_mbx_intr(struct nicvf *nic)
|
|
||||||
nic->speed = mbx.link_status.speed;
|
|
||||||
nic->pf_acked = true;
|
|
||||||
break;
|
|
||||||
- case NIC_MBOX_MSG_ALLOC_SQS_RES_BIT:
|
|
||||||
+ case NIC_MBOX_MSG_ALLOC_SQS:
|
|
||||||
assert_primary(nic);
|
|
||||||
if (mbx.sqs_alloc.qs_count != nic->sqs_count) {
|
|
||||||
nicvf_log_error("Received %" PRIu8 "/%" PRIu8
|
|
||||||
diff --git a/drivers/net/thunderx/base/nicvf_mbox.h b/drivers/net/thunderx/base/nicvf_mbox.h
|
|
||||||
index 084f3a769..8675fe8fb 100644
|
|
||||||
--- a/drivers/net/thunderx/base/nicvf_mbox.h
|
|
||||||
+++ b/drivers/net/thunderx/base/nicvf_mbox.h
|
|
||||||
@@ -68,16 +68,10 @@
|
|
||||||
#define NIC_MBOX_MSG_ALLOC_SQS 0x12 /* Allocate secondary Qset */
|
|
||||||
#define NIC_MBOX_MSG_LOOPBACK 0x16 /* Set interface in loopback */
|
|
||||||
#define NIC_MBOX_MSG_RESET_STAT_COUNTER 0x17 /* Reset statistics counters */
|
|
||||||
-#define NIC_MBOX_MSG_CFG_DONE 0x7E /* VF configuration done */
|
|
||||||
-#define NIC_MBOX_MSG_SHUTDOWN 0x7F /* VF is being shutdown */
|
|
||||||
-#define NIC_MBOX_MSG_RES_BIT 0x80 /* Reset bit from PF */
|
|
||||||
+#define NIC_MBOX_MSG_CFG_DONE 0xF0 /* VF configuration done */
|
|
||||||
+#define NIC_MBOX_MSG_SHUTDOWN 0xF1 /* VF is being shutdown */
|
|
||||||
#define NIC_MBOX_MSG_MAX 0x100 /* Maximum number of messages */
|
|
||||||
|
|
||||||
-#define NIC_MBOX_MSG_RSS_SIZE_RES_BIT \
|
|
||||||
- (NIC_MBOX_MSG_RSS_SIZE | NIC_MBOX_MSG_RES_BIT)
|
|
||||||
-#define NIC_MBOX_MSG_ALLOC_SQS_RES_BIT \
|
|
||||||
- (NIC_MBOX_MSG_ALLOC_SQS | NIC_MBOX_MSG_RES_BIT)
|
|
||||||
-
|
|
||||||
/* Get vNIC VF configuration */
|
|
||||||
struct nic_cfg_msg {
|
|
||||||
uint8_t msg;
|
|
||||||
@@ -157,6 +151,7 @@ struct rss_cfg_msg {
|
|
||||||
/* Physical interface link status */
|
|
||||||
struct bgx_link_status {
|
|
||||||
uint8_t msg;
|
|
||||||
+ uint8_t mac_type;
|
|
||||||
uint8_t link_up;
|
|
||||||
uint8_t duplex;
|
|
||||||
uint32_t speed;
|
|
||||||
--
|
|
||||||
2.12.2
|
|
||||||
|
|
||||||
@ -1,13 +0,0 @@
|
|||||||
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h
|
|
||||||
index d077b49e9..8667f29ca 100644
|
|
||||||
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h
|
|
||||||
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb.h
|
|
||||||
@@ -607,7 +607,7 @@ struct igb_adapter {
|
|
||||||
int int_mode;
|
|
||||||
u32 rss_queues;
|
|
||||||
u32 vmdq_pools;
|
|
||||||
- char fw_version[32];
|
|
||||||
+ char fw_version[43];
|
|
||||||
u32 wvbr;
|
|
||||||
struct igb_mac_addr *mac_table;
|
|
||||||
#ifdef CONFIG_IGB_VMDQ_NETDEV
|
|
||||||
@ -1,66 +0,0 @@
|
|||||||
From 9fb3cd2c041eeca30b6c46e5d555d857d6096ae7 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Ferruh Yigit <ferruh.yigit@intel.com>
|
|
||||||
Date: Wed, 3 May 2017 17:00:16 +0100
|
|
||||||
Subject: [PATCH] kni: fix ethtool build with kernel 4.11
|
|
||||||
MIME-Version: 1.0
|
|
||||||
Content-Type: text/plain; charset=UTF-8
|
|
||||||
Content-Transfer-Encoding: 8bit
|
|
||||||
|
|
||||||
build error:
|
|
||||||
.../lib/librte_eal/linuxapp/kni/igb_main.c:1034:10:
|
|
||||||
error: implicit declaration of function ‘pci_enable_msix’
|
|
||||||
err = pci_enable_msix(pdev,
|
|
||||||
^~~~~~~~~~~~~~~
|
|
||||||
|
|
||||||
This build error observed when CONFIG_RTE_KNI_KMOD_ETHTOOL config option
|
|
||||||
enabled.
|
|
||||||
|
|
||||||
Following Linux commit removes the pci_enable_msix()
|
|
||||||
Linux: 4244de1c64de ("PCI: remove pci_enable_msix")
|
|
||||||
|
|
||||||
Switch to pci_enable_msix_range() for kernel > 4.8 since current Linux
|
|
||||||
igb driver uses this function.
|
|
||||||
|
|
||||||
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
|
|
||||||
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
|
|
||||||
---
|
|
||||||
lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c | 7 +++++++
|
|
||||||
lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h | 4 ++++
|
|
||||||
2 files changed, 11 insertions(+)
|
|
||||||
|
|
||||||
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
|
|
||||||
index c0d52db33..5f1f3a6b5 100644
|
|
||||||
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
|
|
||||||
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c
|
|
||||||
@@ -1031,8 +1031,15 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix)
|
|
||||||
for (i = 0; i < numvecs; i++)
|
|
||||||
adapter->msix_entries[i].entry = i;
|
|
||||||
|
|
||||||
+#ifdef HAVE_PCI_ENABLE_MSIX
|
|
||||||
err = pci_enable_msix(pdev,
|
|
||||||
adapter->msix_entries, numvecs);
|
|
||||||
+#else
|
|
||||||
+ err = pci_enable_msix_range(pdev,
|
|
||||||
+ adapter->msix_entries,
|
|
||||||
+ numvecs,
|
|
||||||
+ numvecs);
|
|
||||||
+#endif
|
|
||||||
if (err == 0)
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
|
|
||||||
index 4abab4aa3..4c52da3c1 100644
|
|
||||||
--- a/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
|
|
||||||
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h
|
|
||||||
@@ -3937,4 +3937,8 @@ skb_set_hash(struct sk_buff *skb, __u32 hash, __always_unused int type)
|
|
||||||
#define HAVE_VF_VLAN_PROTO
|
|
||||||
#endif /* >= 4.9.0, >= SLES12SP3 */
|
|
||||||
|
|
||||||
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 8, 0)
|
|
||||||
+#define HAVE_PCI_ENABLE_MSIX
|
|
||||||
+#endif
|
|
||||||
+
|
|
||||||
#endif /* _KCOMPAT_H_ */
|
|
||||||
--
|
|
||||||
2.13.2
|
|
||||||
|
|
||||||
@ -1,78 +0,0 @@
|
|||||||
From 99bb58f3adc73046b538874a0944578146ee1189 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
|
|
||||||
Date: Thu, 20 Apr 2017 15:11:23 +0200
|
|
||||||
Subject: [PATCH] igb_uio: switch to new irq function for MSI-X
|
|
||||||
|
|
||||||
pci_enable_msix() will be removed in kernel 4.12.
|
|
||||||
The new API pci_alloc_irq_vectors() is available
|
|
||||||
since linux 4.8, thus let's use it.
|
|
||||||
|
|
||||||
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aff171641d18
|
|
||||||
Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=4244de1c64de
|
|
||||||
|
|
||||||
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
|
|
||||||
Reviewed-by: David Marchand <david.marchand@6wind.com>
|
|
||||||
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
|
|
||||||
|
|
||||||
From 62d37a57656607a622a546c88cca5d78b23c4730 Mon Sep 17 00:00:00 2001
|
|
||||||
From: Nirmoy Das <ndas@suse.de>
|
|
||||||
Date: Tue, 18 Jul 2017 13:36:25 +0200
|
|
||||||
Subject: [PATCH] backport upstream patch
|
|
||||||
|
|
||||||
---
|
|
||||||
lib/librte_eal/linuxapp/igb_uio/compat.h | 4 ++++
|
|
||||||
lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 11 +++++++++++
|
|
||||||
2 files changed, 15 insertions(+)
|
|
||||||
|
|
||||||
diff --git a/lib/librte_eal/linuxapp/igb_uio/compat.h b/lib/librte_eal/linuxapp/igb_uio/compat.h
|
|
||||||
index 0d781e4..b800a53 100644
|
|
||||||
--- a/lib/librte_eal/linuxapp/igb_uio/compat.h
|
|
||||||
+++ b/lib/librte_eal/linuxapp/igb_uio/compat.h
|
|
||||||
@@ -123,3 +123,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif /* < 3.3.0 */
|
|
||||||
+
|
|
||||||
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 8, 0)
|
|
||||||
+#define HAVE_PCI_ENABLE_MSIX
|
|
||||||
+#endif
|
|
||||||
diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
|
|
||||||
index df41e45..683cd8c 100644
|
|
||||||
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
|
|
||||||
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
|
|
||||||
@@ -325,7 +325,9 @@ static int
|
|
||||||
igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
||||||
{
|
|
||||||
struct rte_uio_pci_dev *udev;
|
|
||||||
+#ifdef HAVE_PCI_ENABLE_MSIX
|
|
||||||
struct msix_entry msix_entry;
|
|
||||||
+#endif
|
|
||||||
int err;
|
|
||||||
|
|
||||||
udev = kzalloc(sizeof(struct rte_uio_pci_dev), GFP_KERNEL);
|
|
||||||
@@ -379,6 +381,7 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
||||||
switch (igbuio_intr_mode_preferred) {
|
|
||||||
case RTE_INTR_MODE_MSIX:
|
|
||||||
/* Only 1 msi-x vector needed */
|
|
||||||
+#ifdef HAVE_PCI_ENABLE_MSIX
|
|
||||||
msix_entry.entry = 0;
|
|
||||||
if (pci_enable_msix(dev, &msix_entry, 1) == 0) {
|
|
||||||
dev_dbg(&dev->dev, "using MSI-X");
|
|
||||||
@@ -386,6 +389,14 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
||||||
udev->mode = RTE_INTR_MODE_MSIX;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
+#else
|
|
||||||
+ if (pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_MSIX) == 1) {
|
|
||||||
+ dev_dbg(&dev->dev, "using MSI-X");
|
|
||||||
+ udev->info.irq = pci_irq_vector(dev, 0);
|
|
||||||
+ udev->mode = RTE_INTR_MODE_MSIX;
|
|
||||||
+ break;
|
|
||||||
+ }
|
|
||||||
+#endif
|
|
||||||
/* fall back to INTX */
|
|
||||||
case RTE_INTR_MODE_LEGACY:
|
|
||||||
if (pci_intx_mask_supported(dev)) {
|
|
||||||
--
|
|
||||||
2.13.2
|
|
||||||
|
|
||||||
@ -11,6 +11,7 @@
|
|||||||
<flag>sse</flag>
|
<flag>sse</flag>
|
||||||
<flag>sse2</flag>
|
<flag>sse2</flag>
|
||||||
<flag>sse3</flag>
|
<flag>sse3</flag>
|
||||||
|
<!-- TODO add SSE4.2 before that need to fix obs, patch on the way -->
|
||||||
</cpu>
|
</cpu>
|
||||||
</hardware>
|
</hardware>
|
||||||
</overwrite>
|
</overwrite>
|
||||||
|
|||||||
@ -1,3 +0,0 @@
|
|||||||
version https://git-lfs.github.com/spec/v1
|
|
||||||
oid sha256:c8d99a1a074072a6087c3fc2fafa6baf2e64bed08b83935e75e5cf003cefd861
|
|
||||||
size 9056664
|
|
||||||
3
dpdk-17.08.tar.xz
Normal file
3
dpdk-17.08.tar.xz
Normal file
@ -0,0 +1,3 @@
|
|||||||
|
version https://git-lfs.github.com/spec/v1
|
||||||
|
oid sha256:4bd77822ef6fe7a39ab8b11b36b86ba511282ac5ffdb81459eebb42bec5b7ef8
|
||||||
|
size 10156500
|
||||||
@ -1,3 +1,65 @@
|
|||||||
|
-------------------------------------------------------------------
|
||||||
|
Mon Sep 4 11:18:19 CEST 2017 - ndas@suse.de
|
||||||
|
|
||||||
|
- Updated to 17.08(bsc#1050250, bsc#1046598, fate#322913, fate#322608)
|
||||||
|
Some of the new features are listed below:
|
||||||
|
* Increase minimum x86 ISA version to SSE4.2
|
||||||
|
* Added Fail-Safe PMD
|
||||||
|
* Added support for generic flow API (rte_flow) on igb NICs
|
||||||
|
* Added support for generic flow API (rte_flow) on enic
|
||||||
|
* Added support for Chelsio T6 family of adapters
|
||||||
|
* Added latency and performance improvements for cxgbe
|
||||||
|
* Updated mlx5 driver
|
||||||
|
* Added NXP DPAA2 Eventdev PMD
|
||||||
|
* Added dpdk-test-eventdev test application
|
||||||
|
* from 17.05:
|
||||||
|
* Added mbuf raw free API
|
||||||
|
* Added free Tx mbuf on demand API
|
||||||
|
* Added VFIO hotplug support
|
||||||
|
* Added PowerPC support for i40e and its vector PMD
|
||||||
|
* Added VF max bandwidth setting in i40e
|
||||||
|
* Added LiquidIO network PMD
|
||||||
|
* Added support for NXP DPAA2 Network PMD
|
||||||
|
* Added support for NXP DPAA2 - FSLMC bus
|
||||||
|
* Added support for the Wind River Systems AVP PMD
|
||||||
|
* Added vmxnet3 version 3 support
|
||||||
|
* Added MTU feature support to Virtio and Vhost
|
||||||
|
* Added event driven programming model library (rte_eventdev)
|
||||||
|
* Added Software Eventdev PMD
|
||||||
|
* Added Cavium OCTEONTX Eventdev PMD
|
||||||
|
* Added NXP DPAA2 SEC crypto PMD
|
||||||
|
* from 17.02:
|
||||||
|
* Added generic EAL API for I/O device memory read/write operations
|
||||||
|
* Added VF Daemon (VFD) for i40e. - EXPERIMENTAL
|
||||||
|
* Added generic flow API (rte_flow)
|
||||||
|
* Added APIs for MACsec offload support to the ixgbe PMD
|
||||||
|
* Added Solarflare libefx-based network PMD.
|
||||||
|
* Added support for Mellanox ConnectX-5 adapters (mlx5)
|
||||||
|
* Added ARMv8 crypto PMD
|
||||||
|
* Added crypto performance test application
|
||||||
|
* more details can be found in
|
||||||
|
http://dpdk.org/doc/guides/rel_notes/release_17_08.html
|
||||||
|
http://dpdk.org/doc/guides/rel_notes/release_17_05.html
|
||||||
|
http://dpdk.org/doc/guides/rel_notes/release_17_02.html
|
||||||
|
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
|
||||||
|
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
|
||||||
|
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
|
||||||
|
-0005-kni-fix-build-with-gcc-7.1.patch
|
||||||
|
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
|
||||||
|
-0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
|
||||||
|
- Use updated patch to enable HAVE_TRANS_START_HELPER for SLE12SP3(bsc#1031705).
|
||||||
|
[+ 0002-kni-fix-build-on-SLE12-SP3.patch]
|
||||||
|
|
||||||
|
-------------------------------------------------------------------
|
||||||
|
Fri Aug 25 12:09:57 UTC 2017 - marco.varlese@suse.com
|
||||||
|
|
||||||
|
- Enabled CONFIG_RTE_MAJOR_ABI: libs SONAME equal the DPDK release version
|
||||||
|
|
||||||
|
-------------------------------------------------------------------
|
||||||
|
Fri Aug 18 14:44:37 UTC 2017 - marco.varlese@suse.com
|
||||||
|
|
||||||
|
- Split libs into a subpackage to provide multiple installable versions on same sytem
|
||||||
|
|
||||||
-------------------------------------------------------------------
|
-------------------------------------------------------------------
|
||||||
Tue Jul 18 11:26:36 CEST 2017 - ndas@suse.de
|
Tue Jul 18 11:26:36 CEST 2017 - ndas@suse.de
|
||||||
|
|
||||||
|
|||||||
@ -40,10 +40,13 @@
|
|||||||
%bcond_without examples
|
%bcond_without examples
|
||||||
# Add option to build without tools
|
# Add option to build without tools
|
||||||
%bcond_without tools
|
%bcond_without tools
|
||||||
|
|
||||||
|
%define lname libdpdk-17_08-0
|
||||||
|
|
||||||
# Do NOT edit this auto generated file! Edit dpdk.spec instead
|
# Do NOT edit this auto generated file! Edit dpdk.spec instead
|
||||||
# and run 'pre_checkin.sh' before committing
|
# and run 'pre_checkin.sh' before committing
|
||||||
Name: dpdk-thunderx
|
Name: dpdk-thunderx
|
||||||
Version: 16.11.2
|
Version: 17.08
|
||||||
Release: 0
|
Release: 0
|
||||||
Summary: Set of libraries and drivers for fast packet processing (thunderx)
|
Summary: Set of libraries and drivers for fast packet processing (thunderx)
|
||||||
License: BSD-3-Clause and GPL-2.0 and LGPL-2.1
|
License: BSD-3-Clause and GPL-2.0 and LGPL-2.1
|
||||||
@ -58,14 +61,8 @@ Source1: preamble
|
|||||||
# However, the problem still exists and the fix has to find its way to the
|
# However, the problem still exists and the fix has to find its way to the
|
||||||
# upstream code.
|
# upstream code.
|
||||||
Patch1: 0001-enic-fix-Type-punning-and-strict-aliasing-warning.patch
|
Patch1: 0001-enic-fix-Type-punning-and-strict-aliasing-warning.patch
|
||||||
Patch2: 0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
|
# PATCH-FIX-UPSTREAM 0002-kni-fix-build-on-SLE12-SP3.patch bsc#1031705
|
||||||
Patch3: 0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
|
Patch2: 0002-kni-fix-build-on-SLE12-SP3.patch
|
||||||
Patch4: 0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
|
|
||||||
#PATCH-FIX-UPSTREAM 0005-kni-fix-build-with-gcc-7.1.patch bsc#1042372
|
|
||||||
Patch5: 0005-kni-fix-build-with-gcc-7.1.patch
|
|
||||||
#PATCH-FIX-UPSTREAM 0006-kni-fix-ethtool-build-with-kernel-4.11.patch
|
|
||||||
Patch6: 0006-kni-fix-ethtool-build-with-kernel-4.11.patch
|
|
||||||
Patch7: 0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch
|
|
||||||
BuildRequires: doxygen
|
BuildRequires: doxygen
|
||||||
BuildRequires: fdupes
|
BuildRequires: fdupes
|
||||||
BuildRequires: libnuma-devel
|
BuildRequires: libnuma-devel
|
||||||
@ -83,7 +80,7 @@ fast packet processing in the user space.
|
|||||||
%package devel
|
%package devel
|
||||||
Summary: Data Plane Development Kit development files (thunderx)
|
Summary: Data Plane Development Kit development files (thunderx)
|
||||||
Group: Development/Libraries/C and C++
|
Group: Development/Libraries/C and C++
|
||||||
Requires: %{name} = %{version}
|
Requires: %{lname} = %{version}
|
||||||
Provides: dpdk-any-devel = %{version}
|
Provides: dpdk-any-devel = %{version}
|
||||||
Conflicts: otherproviders(dpdk-any-devel)
|
Conflicts: otherproviders(dpdk-any-devel)
|
||||||
|
|
||||||
@ -91,6 +88,15 @@ Conflicts: otherproviders(dpdk-any-devel)
|
|||||||
This package contains the headers and other files needed for developing
|
This package contains the headers and other files needed for developing
|
||||||
applications with the Data Plane Development Kit.
|
applications with the Data Plane Development Kit.
|
||||||
|
|
||||||
|
%package -n %{lname}
|
||||||
|
Summary: Data Plane Development Kit runtime libraries (thunderx)
|
||||||
|
Group: Development/Libraries/C and C++
|
||||||
|
Provides: %{lname}-any = %{version}
|
||||||
|
|
||||||
|
%description -n %{lname}
|
||||||
|
This package contains the runtime libraries needed for 3rd party application
|
||||||
|
to use the Data Plane Development Kit.
|
||||||
|
|
||||||
%package doc
|
%package doc
|
||||||
Summary: Data Plane Development Kit API documentation (thunderx)
|
Summary: Data Plane Development Kit API documentation (thunderx)
|
||||||
Group: System/Libraries
|
Group: System/Libraries
|
||||||
@ -149,14 +155,9 @@ The DPDK Kernel NIC Interface (KNI) allows userspace applications access to the
|
|||||||
|
|
||||||
%prep
|
%prep
|
||||||
# can't use %{name} because of dpdk-thunderx
|
# can't use %{name} because of dpdk-thunderx
|
||||||
%setup -q -n dpdk-stable-%{version}
|
%setup -q -n dpdk-%{version}
|
||||||
%patch1 -p1 -z .enic
|
%patch1 -p1 -z .enic
|
||||||
%patch2 -p1 -z .kni1
|
%patch2 -p1 -z .kni
|
||||||
%patch3 -p1 -z .kni2
|
|
||||||
%patch4 -p1 -z .thunderx
|
|
||||||
%patch5 -p1 -z .kni3
|
|
||||||
%patch6 -p1 -z .kni4
|
|
||||||
%patch7 -p1 -z .igb1
|
|
||||||
|
|
||||||
# This fixes CROSS compilation (broken) in the mk file for ThunderX
|
# This fixes CROSS compilation (broken) in the mk file for ThunderX
|
||||||
sed -i '/^CROSS /s/^/#/' mk/machine/thunderx/rte.vars.mk
|
sed -i '/^CROSS /s/^/#/' mk/machine/thunderx/rte.vars.mk
|
||||||
@ -177,6 +178,9 @@ function setdefaultconf()
|
|||||||
# Disable experimental features
|
# Disable experimental features
|
||||||
setconf CONFIG_RTE_NEXT_ABI n $1
|
setconf CONFIG_RTE_NEXT_ABI n $1
|
||||||
|
|
||||||
|
# SONAME equals to DPDK release version
|
||||||
|
setconf CONFIG_RTE_MAJOR_ABI %{version} $1
|
||||||
|
|
||||||
# Enable automatic driver loading from this path
|
# Enable automatic driver loading from this path
|
||||||
setconf CONFIG_RTE_EAL_PMD_PATH '"%{pmddir}"' $1
|
setconf CONFIG_RTE_EAL_PMD_PATH '"%{pmddir}"' $1
|
||||||
|
|
||||||
@ -262,10 +266,10 @@ unset RTE_SDK RTE_INCLUDE RTE_TARGET
|
|||||||
%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir}
|
%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir}
|
||||||
|
|
||||||
%if ! %{with tools}
|
%if ! %{with tools}
|
||||||
rm -rf %{buildroot}%{sdkdir}/tools
|
rm -rf %{buildroot}%{sdkdir}/usertools/
|
||||||
rm -rf %{buildroot}%{_sbindir}/dpdk_nic_bind
|
rm -rf %{buildroot}%{_sbindir}/dpdk_nic_bind
|
||||||
%endif
|
%endif
|
||||||
rm -f %{buildroot}%{sdkdir}/tools/setup.sh
|
rm -f %{buildroot}%{sdkdir}/usertools/setup.sh
|
||||||
#TODO pip elftools has issues to fix
|
#TODO pip elftools has issues to fix
|
||||||
rm -rf %{buildroot}%{_bindir}/dpdk-pmdinfo
|
rm -rf %{buildroot}%{_bindir}/dpdk-pmdinfo
|
||||||
|
|
||||||
@ -283,6 +287,13 @@ for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do
|
|||||||
bn=$(basename ${f})
|
bn=$(basename ${f})
|
||||||
ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
|
ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
|
||||||
done
|
done
|
||||||
|
#mempool is a driver now from 16.07
|
||||||
|
mkdir -p %{buildroot}/%{pmddir}
|
||||||
|
for f in %{buildroot}/%{_libdir}/*_mempool_*.so.*; do
|
||||||
|
bn=$(basename ${f})
|
||||||
|
ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
|
||||||
|
done
|
||||||
|
|
||||||
# Setup RTE_SDK environment as expected by apps etc
|
# Setup RTE_SDK environment as expected by apps etc
|
||||||
mkdir -p %{buildroot}/%{_sysconfdir}/profile.d
|
mkdir -p %{buildroot}/%{_sysconfdir}/profile.d
|
||||||
cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh
|
cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh
|
||||||
@ -316,8 +327,8 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
|
|
||||||
%post devel -p /sbin/ldconfig
|
%post devel -p /sbin/ldconfig
|
||||||
%postun devel -p /sbin/ldconfig
|
%postun devel -p /sbin/ldconfig
|
||||||
%post -p /sbin/ldconfig
|
%post -n %{lname} -p /sbin/ldconfig
|
||||||
%postun -p /sbin/ldconfig
|
%postun -n %{lname} -p /sbin/ldconfig
|
||||||
|
|
||||||
%files
|
%files
|
||||||
%defattr(-,root,root)
|
%defattr(-,root,root)
|
||||||
@ -327,6 +338,8 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
%{_bindir}/dpdk_proc_info
|
%{_bindir}/dpdk_proc_info
|
||||||
%{_bindir}/dpdk-pdump
|
%{_bindir}/dpdk-pdump
|
||||||
|
|
||||||
|
%files -n %{lname}
|
||||||
|
%defattr(-,root,root)
|
||||||
%if %{with shared}
|
%if %{with shared}
|
||||||
%dir %{_libdir}/dpdk-pmds
|
%dir %{_libdir}/dpdk-pmds
|
||||||
|
|
||||||
@ -346,7 +359,7 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
%{incdir}/
|
%{incdir}/
|
||||||
%{sdkdir}
|
%{sdkdir}
|
||||||
%if %{with tools}
|
%if %{with tools}
|
||||||
%exclude %{sdkdir}/tools/
|
%exclude %{sdkdir}/usertools/
|
||||||
%endif
|
%endif
|
||||||
%if %{with examples}
|
%if %{with examples}
|
||||||
%exclude %{sdkdir}/examples/
|
%exclude %{sdkdir}/examples/
|
||||||
@ -361,9 +374,11 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
%if %{with tools}
|
%if %{with tools}
|
||||||
%files tools
|
%files tools
|
||||||
%defattr(-,root,root)
|
%defattr(-,root,root)
|
||||||
%{sdkdir}/tools/
|
%{sdkdir}/usertools/
|
||||||
%{_sbindir}/dpdk-devbind
|
%{_sbindir}/dpdk-devbind
|
||||||
%{_sbindir}/dpdk_nic_bind
|
%{_sbindir}/dpdk_nic_bind
|
||||||
|
%{_bindir}/dpdk-test-eventdev
|
||||||
|
%{_bindir}/dpdk-test-crypto-perf
|
||||||
%endif
|
%endif
|
||||||
|
|
||||||
%if %{with examples}
|
%if %{with examples}
|
||||||
|
|||||||
62
dpdk.changes
62
dpdk.changes
@ -1,3 +1,65 @@
|
|||||||
|
-------------------------------------------------------------------
|
||||||
|
Mon Sep 4 11:18:19 CEST 2017 - ndas@suse.de
|
||||||
|
|
||||||
|
- Updated to 17.08(bsc#1050250, bsc#1046598, fate#322913, fate#322608)
|
||||||
|
Some of the new features are listed below:
|
||||||
|
* Increase minimum x86 ISA version to SSE4.2
|
||||||
|
* Added Fail-Safe PMD
|
||||||
|
* Added support for generic flow API (rte_flow) on igb NICs
|
||||||
|
* Added support for generic flow API (rte_flow) on enic
|
||||||
|
* Added support for Chelsio T6 family of adapters
|
||||||
|
* Added latency and performance improvements for cxgbe
|
||||||
|
* Updated mlx5 driver
|
||||||
|
* Added NXP DPAA2 Eventdev PMD
|
||||||
|
* Added dpdk-test-eventdev test application
|
||||||
|
* from 17.05:
|
||||||
|
* Added mbuf raw free API
|
||||||
|
* Added free Tx mbuf on demand API
|
||||||
|
* Added VFIO hotplug support
|
||||||
|
* Added PowerPC support for i40e and its vector PMD
|
||||||
|
* Added VF max bandwidth setting in i40e
|
||||||
|
* Added LiquidIO network PMD
|
||||||
|
* Added support for NXP DPAA2 Network PMD
|
||||||
|
* Added support for NXP DPAA2 - FSLMC bus
|
||||||
|
* Added support for the Wind River Systems AVP PMD
|
||||||
|
* Added vmxnet3 version 3 support
|
||||||
|
* Added MTU feature support to Virtio and Vhost
|
||||||
|
* Added event driven programming model library (rte_eventdev)
|
||||||
|
* Added Software Eventdev PMD
|
||||||
|
* Added Cavium OCTEONTX Eventdev PMD
|
||||||
|
* Added NXP DPAA2 SEC crypto PMD
|
||||||
|
* from 17.02:
|
||||||
|
* Added generic EAL API for I/O device memory read/write operations
|
||||||
|
* Added VF Daemon (VFD) for i40e. - EXPERIMENTAL
|
||||||
|
* Added generic flow API (rte_flow)
|
||||||
|
* Added APIs for MACsec offload support to the ixgbe PMD
|
||||||
|
* Added Solarflare libefx-based network PMD.
|
||||||
|
* Added support for Mellanox ConnectX-5 adapters (mlx5)
|
||||||
|
* Added ARMv8 crypto PMD
|
||||||
|
* Added crypto performance test application
|
||||||
|
* more details can be found in
|
||||||
|
http://dpdk.org/doc/guides/rel_notes/release_17_08.html
|
||||||
|
http://dpdk.org/doc/guides/rel_notes/release_17_05.html
|
||||||
|
http://dpdk.org/doc/guides/rel_notes/release_17_02.html
|
||||||
|
[-0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
|
||||||
|
-0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
|
||||||
|
-0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
|
||||||
|
-0005-kni-fix-build-with-gcc-7.1.patch
|
||||||
|
-0006-kni-fix-ethtool-build-with-kernel-4.11.patch
|
||||||
|
-0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch]
|
||||||
|
- Use updated patch to enable HAVE_TRANS_START_HELPER for SLE12SP3(bsc#1031705).
|
||||||
|
[+ 0002-kni-fix-build-on-SLE12-SP3.patch]
|
||||||
|
|
||||||
|
-------------------------------------------------------------------
|
||||||
|
Fri Aug 25 12:09:57 UTC 2017 - marco.varlese@suse.com
|
||||||
|
|
||||||
|
- Enabled CONFIG_RTE_MAJOR_ABI: libs SONAME equal the DPDK release version
|
||||||
|
|
||||||
|
-------------------------------------------------------------------
|
||||||
|
Fri Aug 18 14:44:37 UTC 2017 - marco.varlese@suse.com
|
||||||
|
|
||||||
|
- Split libs into a subpackage to provide multiple installable versions on same sytem
|
||||||
|
|
||||||
-------------------------------------------------------------------
|
-------------------------------------------------------------------
|
||||||
Tue Jul 18 11:26:36 CEST 2017 - ndas@suse.de
|
Tue Jul 18 11:26:36 CEST 2017 - ndas@suse.de
|
||||||
|
|
||||||
|
|||||||
61
dpdk.spec
61
dpdk.spec
@ -40,8 +40,11 @@
|
|||||||
%bcond_without examples
|
%bcond_without examples
|
||||||
# Add option to build without tools
|
# Add option to build without tools
|
||||||
%bcond_without tools
|
%bcond_without tools
|
||||||
|
|
||||||
|
%define lname libdpdk-17_08-0
|
||||||
|
|
||||||
Name: dpdk
|
Name: dpdk
|
||||||
Version: 16.11.2
|
Version: 17.08
|
||||||
Release: 0
|
Release: 0
|
||||||
Summary: Set of libraries and drivers for fast packet processing
|
Summary: Set of libraries and drivers for fast packet processing
|
||||||
License: BSD-3-Clause and GPL-2.0 and LGPL-2.1
|
License: BSD-3-Clause and GPL-2.0 and LGPL-2.1
|
||||||
@ -56,14 +59,8 @@ Source1: preamble
|
|||||||
# However, the problem still exists and the fix has to find its way to the
|
# However, the problem still exists and the fix has to find its way to the
|
||||||
# upstream code.
|
# upstream code.
|
||||||
Patch1: 0001-enic-fix-Type-punning-and-strict-aliasing-warning.patch
|
Patch1: 0001-enic-fix-Type-punning-and-strict-aliasing-warning.patch
|
||||||
Patch2: 0002-kni-define-HAVE_VF_VLAN_PROTO-for-SLES12SP3.patch
|
# PATCH-FIX-UPSTREAM 0002-kni-fix-build-on-SLE12-SP3.patch bsc#1031705
|
||||||
Patch3: 0003-kni-define-HAVE_TRANS_START_HELPER-for-SLES12SP3.patch
|
Patch2: 0002-kni-fix-build-on-SLE12-SP3.patch
|
||||||
Patch4: 0004-net-thunderx-sync-mailbox-definitions-with-Linux-PF-.patch
|
|
||||||
#PATCH-FIX-UPSTREAM 0005-kni-fix-build-with-gcc-7.1.patch bsc#1042372
|
|
||||||
Patch5: 0005-kni-fix-build-with-gcc-7.1.patch
|
|
||||||
#PATCH-FIX-UPSTREAM 0006-kni-fix-ethtool-build-with-kernel-4.11.patch
|
|
||||||
Patch6: 0006-kni-fix-ethtool-build-with-kernel-4.11.patch
|
|
||||||
Patch7: 0007-igb_uio-switch-to-new-irq-function-for-MSI-X.patch
|
|
||||||
BuildRequires: doxygen
|
BuildRequires: doxygen
|
||||||
BuildRequires: fdupes
|
BuildRequires: fdupes
|
||||||
BuildRequires: libnuma-devel
|
BuildRequires: libnuma-devel
|
||||||
@ -81,7 +78,7 @@ fast packet processing in the user space.
|
|||||||
%package devel
|
%package devel
|
||||||
Summary: Data Plane Development Kit development files
|
Summary: Data Plane Development Kit development files
|
||||||
Group: Development/Libraries/C and C++
|
Group: Development/Libraries/C and C++
|
||||||
Requires: %{name} = %{version}
|
Requires: %{lname} = %{version}
|
||||||
Provides: dpdk-any-devel = %{version}
|
Provides: dpdk-any-devel = %{version}
|
||||||
Conflicts: otherproviders(dpdk-any-devel)
|
Conflicts: otherproviders(dpdk-any-devel)
|
||||||
|
|
||||||
@ -89,6 +86,15 @@ Conflicts: otherproviders(dpdk-any-devel)
|
|||||||
This package contains the headers and other files needed for developing
|
This package contains the headers and other files needed for developing
|
||||||
applications with the Data Plane Development Kit.
|
applications with the Data Plane Development Kit.
|
||||||
|
|
||||||
|
%package -n %{lname}
|
||||||
|
Summary: Data Plane Development Kit runtime libraries
|
||||||
|
Group: Development/Libraries/C and C++
|
||||||
|
Provides: %{lname}-any = %{version}
|
||||||
|
|
||||||
|
%description -n %{lname}
|
||||||
|
This package contains the runtime libraries needed for 3rd party application
|
||||||
|
to use the Data Plane Development Kit.
|
||||||
|
|
||||||
%package doc
|
%package doc
|
||||||
Summary: Data Plane Development Kit API documentation
|
Summary: Data Plane Development Kit API documentation
|
||||||
Group: System/Libraries
|
Group: System/Libraries
|
||||||
@ -147,14 +153,9 @@ The DPDK Kernel NIC Interface (KNI) allows userspace applications access to the
|
|||||||
|
|
||||||
%prep
|
%prep
|
||||||
# can't use %{name} because of dpdk-thunderx
|
# can't use %{name} because of dpdk-thunderx
|
||||||
%setup -q -n dpdk-stable-%{version}
|
%setup -q -n dpdk-%{version}
|
||||||
%patch1 -p1 -z .enic
|
%patch1 -p1 -z .enic
|
||||||
%patch2 -p1 -z .kni1
|
%patch2 -p1 -z .kni
|
||||||
%patch3 -p1 -z .kni2
|
|
||||||
%patch4 -p1 -z .thunderx
|
|
||||||
%patch5 -p1 -z .kni3
|
|
||||||
%patch6 -p1 -z .kni4
|
|
||||||
%patch7 -p1 -z .igb1
|
|
||||||
|
|
||||||
# This fixes CROSS compilation (broken) in the mk file for ThunderX
|
# This fixes CROSS compilation (broken) in the mk file for ThunderX
|
||||||
sed -i '/^CROSS /s/^/#/' mk/machine/thunderx/rte.vars.mk
|
sed -i '/^CROSS /s/^/#/' mk/machine/thunderx/rte.vars.mk
|
||||||
@ -175,6 +176,9 @@ function setdefaultconf()
|
|||||||
# Disable experimental features
|
# Disable experimental features
|
||||||
setconf CONFIG_RTE_NEXT_ABI n $1
|
setconf CONFIG_RTE_NEXT_ABI n $1
|
||||||
|
|
||||||
|
# SONAME equals to DPDK release version
|
||||||
|
setconf CONFIG_RTE_MAJOR_ABI %{version} $1
|
||||||
|
|
||||||
# Enable automatic driver loading from this path
|
# Enable automatic driver loading from this path
|
||||||
setconf CONFIG_RTE_EAL_PMD_PATH '"%{pmddir}"' $1
|
setconf CONFIG_RTE_EAL_PMD_PATH '"%{pmddir}"' $1
|
||||||
|
|
||||||
@ -260,10 +264,10 @@ unset RTE_SDK RTE_INCLUDE RTE_TARGET
|
|||||||
%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir}
|
%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir}
|
||||||
|
|
||||||
%if ! %{with tools}
|
%if ! %{with tools}
|
||||||
rm -rf %{buildroot}%{sdkdir}/tools
|
rm -rf %{buildroot}%{sdkdir}/usertools/
|
||||||
rm -rf %{buildroot}%{_sbindir}/dpdk_nic_bind
|
rm -rf %{buildroot}%{_sbindir}/dpdk_nic_bind
|
||||||
%endif
|
%endif
|
||||||
rm -f %{buildroot}%{sdkdir}/tools/setup.sh
|
rm -f %{buildroot}%{sdkdir}/usertools/setup.sh
|
||||||
#TODO pip elftools has issues to fix
|
#TODO pip elftools has issues to fix
|
||||||
rm -rf %{buildroot}%{_bindir}/dpdk-pmdinfo
|
rm -rf %{buildroot}%{_bindir}/dpdk-pmdinfo
|
||||||
|
|
||||||
@ -281,6 +285,13 @@ for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do
|
|||||||
bn=$(basename ${f})
|
bn=$(basename ${f})
|
||||||
ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
|
ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
|
||||||
done
|
done
|
||||||
|
#mempool is a driver now from 16.07
|
||||||
|
mkdir -p %{buildroot}/%{pmddir}
|
||||||
|
for f in %{buildroot}/%{_libdir}/*_mempool_*.so.*; do
|
||||||
|
bn=$(basename ${f})
|
||||||
|
ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
|
||||||
|
done
|
||||||
|
|
||||||
# Setup RTE_SDK environment as expected by apps etc
|
# Setup RTE_SDK environment as expected by apps etc
|
||||||
mkdir -p %{buildroot}/%{_sysconfdir}/profile.d
|
mkdir -p %{buildroot}/%{_sysconfdir}/profile.d
|
||||||
cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh
|
cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh
|
||||||
@ -314,8 +325,8 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
|
|
||||||
%post devel -p /sbin/ldconfig
|
%post devel -p /sbin/ldconfig
|
||||||
%postun devel -p /sbin/ldconfig
|
%postun devel -p /sbin/ldconfig
|
||||||
%post -p /sbin/ldconfig
|
%post -n %{lname} -p /sbin/ldconfig
|
||||||
%postun -p /sbin/ldconfig
|
%postun -n %{lname} -p /sbin/ldconfig
|
||||||
|
|
||||||
%files
|
%files
|
||||||
%defattr(-,root,root)
|
%defattr(-,root,root)
|
||||||
@ -325,6 +336,8 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
%{_bindir}/dpdk_proc_info
|
%{_bindir}/dpdk_proc_info
|
||||||
%{_bindir}/dpdk-pdump
|
%{_bindir}/dpdk-pdump
|
||||||
|
|
||||||
|
%files -n %{lname}
|
||||||
|
%defattr(-,root,root)
|
||||||
%if %{with shared}
|
%if %{with shared}
|
||||||
%dir %{_libdir}/dpdk-pmds
|
%dir %{_libdir}/dpdk-pmds
|
||||||
|
|
||||||
@ -344,7 +357,7 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
%{incdir}/
|
%{incdir}/
|
||||||
%{sdkdir}
|
%{sdkdir}
|
||||||
%if %{with tools}
|
%if %{with tools}
|
||||||
%exclude %{sdkdir}/tools/
|
%exclude %{sdkdir}/usertools/
|
||||||
%endif
|
%endif
|
||||||
%if %{with examples}
|
%if %{with examples}
|
||||||
%exclude %{sdkdir}/examples/
|
%exclude %{sdkdir}/examples/
|
||||||
@ -359,9 +372,11 @@ ln -s %{_sbindir}/dpdk-devbind %{buildroot}%{_sbindir}/dpdk_nic_bind
|
|||||||
%if %{with tools}
|
%if %{with tools}
|
||||||
%files tools
|
%files tools
|
||||||
%defattr(-,root,root)
|
%defattr(-,root,root)
|
||||||
%{sdkdir}/tools/
|
%{sdkdir}/usertools/
|
||||||
%{_sbindir}/dpdk-devbind
|
%{_sbindir}/dpdk-devbind
|
||||||
%{_sbindir}/dpdk_nic_bind
|
%{_sbindir}/dpdk_nic_bind
|
||||||
|
%{_bindir}/dpdk-test-eventdev
|
||||||
|
%{_bindir}/dpdk-test-crypto-perf
|
||||||
%endif
|
%endif
|
||||||
|
|
||||||
%if %{with examples}
|
%if %{with examples}
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user