dracut/dracut_v041_to_HEAD.patch

diff --git a/50-dracut.install b/50-dracut.install
index 5ac74f1..d05abb9 100755
--- a/50-dracut.install
+++ b/50-dracut.install
@@ -20,6 +20,8 @@ case "$COMMAND" in
 
         if [[ -f /etc/kernel/cmdline ]]; then
             readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+        elif [[ -f /usr/lib/kernel/cmdline ]]; then
+            readarray -t BOOT_OPTIONS < /usr/lib/kernel/cmdline
         fi
 
         if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
diff --git a/51-dracut-rescue.install b/51-dracut-rescue.install
index 9fb0c5d..9abd9d7 100755
--- a/51-dracut-rescue.install
+++ b/51-dracut-rescue.install
@@ -41,6 +41,8 @@ fi
 
 if [[ -f /etc/kernel/cmdline ]]; then
     readarray -t BOOT_OPTIONS < /etc/kernel/cmdline
+elif [[ -f /usr/lib/kernel/cmdline ]]; then
+    readarray -t BOOT_OPTIONS < /usr/lib/kernel/cmdline
 fi
 if ! [[ "${BOOT_OPTIONS[@]}" ]]; then
     read -ar BOOT_OPTIONS < /proc/cmdline
diff --git a/dracut.8.asc b/dracut.8.asc
index 7d11f43..9aecbfb 100644
--- a/dracut.8.asc
+++ b/dracut.8.asc
@@ -31,7 +31,7 @@ early userspace.
 For a complete list of kernel command line options see *dracut.cmdline*(7).
 
 If you are dropped to an emergency shell, while booting your initramfs,
-the file _/run/initramfs/rdsosreport.txt_ is created, which can be safed to a
+the file _/run/initramfs/rdsosreport.txt_ is created, which can be saved to a
 (to be mounted by hand) partition (usually /boot) or a USB stick.
 Additional debugging info can be produced by adding **rd.debug** to the kernel
 command line. _/run/initramfs/rdsosreport.txt_ contains all logs and the output
diff --git a/dracut.cmdline.7.asc b/dracut.cmdline.7.asc
index 5ff84ef..e51fd1b 100644
--- a/dracut.cmdline.7.asc
+++ b/dracut.cmdline.7.asc
@@ -163,7 +163,7 @@ Misc
 Debug
 ~~~~~
 If you are dropped to an emergency shell, the file 
-_/run/initramfs/rdsosreport.txt_ is created, which can be safed to a (to be
+_/run/initramfs/rdsosreport.txt_ is created, which can be saved to a (to be
 mounted by hand) partition (usually /boot) or a USB stick. Additional debugging
 info can be produced by adding **rd.debug** to the kernel command line.
 _/run/initramfs/rdsosreport.txt_ contains all logs and the output of some tools.
@@ -834,11 +834,27 @@ Enables debug output from the live boot process.
 Specifies the directory within the squashfs where the ext3fs.img or rootfs.img
 can be found.  By default, this is __LiveOS__.
 
+**rd.live.ram=**1::
+Copy the complete image to RAM and use this for booting. This is useful
+when the image resides on i.e. a DVD which needs to be ejected later on.
+
+**rd.live.overlay.thin=**1::
+Enables the usage of thin snapshots instead of classic dm snapshots.
+The advantage of thin snapshots is, that they support discards, and will free
+blocks which are not claimed by the filesystem. In this use case this means,
+that memory is given back to the kernel, when the filesystem does not claim it
+anymore.
+
 **rd.writable.fsimg=**1::
 Enables writable filesystem support.  The system will boot with a fully 
 writable filesystem without snapshots __(see notes above about available live boot options)__.
 You can use the **rootflags** option to set mount options for the live
 filesystem as well __(see documentation about rootflags in the **Standard** section above)__.
+This implies that the whole image is copied to RAM before the boot continues.
++
+NOTE: There must be enough free RAM available to hold the complete image.
++
+This method is very suitable for diskless boots.
 
 
 Plymouth Boot Splash
diff --git a/dracut.conf.d/fedora.conf.example b/dracut.conf.d/fedora.conf.example
index b6c769c..b126b09 100644
--- a/dracut.conf.d/fedora.conf.example
+++ b/dracut.conf.d/fedora.conf.example
@@ -15,4 +15,5 @@ systemdsystemunitdir=/usr/lib/systemd/system
 systemdsystemconfdir=/etc/systemd/system
 udevdir=/usr/lib/udev
 hostonly="yes"
+hostonly_cmdline="no"
 early_microcode="yes"
diff --git a/dracut.sh b/dracut.sh
index 5e2feba..17bf8f2 100755
--- a/dracut.sh
+++ b/dracut.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/bash --norc
 #
 # Generator script for a dracut initramfs
 # Tries to retain some degree of compatibility with the command line
diff --git a/modules.d/01fips/module-setup.sh b/modules.d/01fips/module-setup.sh
index d232d58..aacbc95 100755
--- a/modules.d/01fips/module-setup.sh
+++ b/modules.d/01fips/module-setup.sh
@@ -14,7 +14,7 @@ depends() {
 installkernel() {
     local _fipsmodules _mod
     _fipsmodules="aead aes_generic aes-x86_64 ansi_cprng arc4 blowfish camellia cast6 cbc ccm "
-    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod "
+    _fipsmodules+="chainiv crc32c crct10dif_generic cryptomgr crypto_null ctr cts deflate des des3_ede dm-crypt dm-mod drbg "
     _fipsmodules+="ecb eseqiv fcrypt gcm ghash_generic hmac khazad lzo md4 md5 michael_mic rmd128 "
     _fipsmodules+="rmd160 rmd256 rmd320 rot13 salsa20 seed seqiv serpent sha1 sha224 sha256 sha256_generic "
     _fipsmodules+="sha384 sha512 sha512_generic tcrypt tea tnepres twofish wp256 wp384 wp512 xeta xtea xts zlib"
diff --git a/modules.d/90dm/dm-shutdown.sh b/modules.d/90dm/dm-shutdown.sh
index dfdb48b..04c89be 100755
--- a/modules.d/90dm/dm-shutdown.sh
+++ b/modules.d/90dm/dm-shutdown.sh
@@ -1,11 +1,12 @@
 #!/bin/sh
 
 _do_dm_shutdown() {
-    local ret
+    local ret=0
     local final=$1
     info "Disassembling device-mapper devices"
-    dmsetup -v remove_all
-    ret=$?
+    for dev in $(dmsetup info -c --noheadings -o name) ; do
+        dmsetup -v --noudevsync remove "$dev" || ret=$?
+    done
     if [ "x$final" != "x" ]; then
         info "dmsetup ls --tree"
         dmsetup ls --tree 2>&1 | vinfo
diff --git a/modules.d/90dmsquash-live/dmsquash-live-root.sh b/modules.d/90dmsquash-live/dmsquash-live-root.sh
index 9c08e94..b632f6a 100755
--- a/modules.d/90dmsquash-live/dmsquash-live-root.sh
+++ b/modules.d/90dmsquash-live/dmsquash-live-root.sh
@@ -30,6 +30,8 @@ getargbool 0 rd.writable.fsimg -d -y writable_fsimg && writable_fsimg="yes"
 overlay_size=$(getarg rd.live.overlay.size=)
 [ -z "$overlay_size" ] && overlay_size=512
 
+getargbool 0 rd.live.overlay.thin && thin_snapshot="yes"
+
 # CD/DVD media check
 [ -b $livedev ] && fs=$(blkid -s TYPE -o value $livedev)
 if [ "$fs" = "iso9660" -o "$fs" = "udf" ]; then
@@ -146,7 +148,31 @@ do_live_overlay() {
         base=$BASE_LOOPDEV
         over=$OVERLAY_LOOPDEV
     fi
-    echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
+
+    if [ -n "$thin_snapshot" ]; then
+        modprobe dm_thin_pool
+        mkdir /run/initramfs/thin-overlay
+
+        # In block units (512b)
+        thin_data_sz=$(( $overlay_size * 1024 * 1024 / 512 ))
+        thin_meta_sz=$(( $thin_data_sz / 10 ))
+
+        # It is important to have the backing file on a tmpfs
+        # this is needed to let the loopdevice support TRIM
+        dd if=/dev/null of=/run/initramfs/thin-overlay/meta bs=1b count=1 seek=$((thin_meta_sz)) 2> /dev/null
+        dd if=/dev/null of=/run/initramfs/thin-overlay/data bs=1b count=1 seek=$((thin_data_sz)) 2> /dev/null
+
+        THIN_META_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/meta )
+        THIN_DATA_LOOPDEV=$( losetup --show -f /run/initramfs/thin-overlay/data )
+
+        echo 0 $thin_data_sz thin-pool $THIN_META_LOOPDEV $THIN_DATA_LOOPDEV 1024 1024 | dmsetup create live-overlay-pool
+        dmsetup message /dev/mapper/live-overlay-pool 0 "create_thin 0"
+
+        # Create a snapshot of the base image
+        echo 0 $sz thin /dev/mapper/live-overlay-pool 0 $base | dmsetup create live-rw
+    else
+        echo 0 $sz snapshot $base $over p 8 | dmsetup create live-rw
+    fi
 
     # Create a device that always points to a ro base image
     echo 0 $sz linear $base 0 | dmsetup create --readonly live-base
@@ -174,29 +200,6 @@ if [ -n "$OSMINSQFS" ]; then
     umount -l /run/initramfs/squashfs.osmin
 fi
 
-# we might have an embedded fs image to use as rootfs (uncompressed live)
-if [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
-    FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
-elif [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
-    FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
-fi
-
-if [ -n "$FSIMG" ] ; then
-    BASE_LOOPDEV=$( losetup -f )
-
-    if [ -n "$writable_fsimg" ] ; then
-        # mount the provided fileysstem read/write
-        echo "Unpacking live filesystem (may take some time)"
-        unpack_archive $FSIMG /run/initramfs/fsimg/
-        losetup $BASE_LOOPDEV /run/initramfs/fsimg/rootfs.img
-        echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw
-    else
-        # mount the filesystem read-only and add a dm snapshot for writes
-        losetup -r $BASE_LOOPDEV $FSIMG
-        do_live_from_base_loop
-    fi
-fi
-
 # we might have an embedded fs image on squashfs (compressed live)
 if [ -e /run/initramfs/live/${live_dir}/${squash_image} ]; then
     SQUASHED="/run/initramfs/live/${live_dir}/${squash_image}"
@@ -217,18 +220,42 @@ if [ -e "$SQUASHED" ] ; then
     mkdir -m 0755 -p /run/initramfs/squashfs
     mount -n -t squashfs -o ro $SQUASHED_LOOPDEV /run/initramfs/squashfs
 
-    BASE_LOOPDEV=$( losetup -f )
-    if [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
-        losetup -r $BASE_LOOPDEV /run/initramfs/squashfs/LiveOS/ext3fs.img
-    elif [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
-        losetup -r $BASE_LOOPDEV /run/initramfs/squashfs/LiveOS/rootfs.img
-    fi
+fi
+
+# we might have an embedded fs image to use as rootfs (uncompressed live)
+if [ -e /run/initramfs/live/${live_dir}/ext3fs.img ]; then
+    FSIMG="/run/initramfs/live/${live_dir}/ext3fs.img"
+elif [ -e /run/initramfs/live/${live_dir}/rootfs.img ]; then
+    FSIMG="/run/initramfs/live/${live_dir}/rootfs.img"
+elif [ -f /run/initramfs/squashfs/LiveOS/ext3fs.img ]; then
+    FSIMG="/run/initramfs/squashfs/LiveOS/ext3fs.img"
+elif [ -f /run/initramfs/squashfs/LiveOS/rootfs.img ]; then
+    FSIMG="/run/initramfs/squashfs/LiveOS/rootfs.img"
+fi
 
-    umount -l /run/initramfs/squashfs
+if [ -n "$FSIMG" ] ; then
+    BASE_LOOPDEV=$( losetup -f )
 
-    do_live_from_base_loop
+    if [ -n "$writable_fsimg" ] ; then
+        # mount the provided fileysstem read/write
+        echo "Unpacking live filesystem (may take some time)"
+        mkdir /run/initramfs/fsimg/
+        if [ -n "$SQUASHED" ]; then
+            cp -v $FSIMG /run/initramfs/fsimg/rootfs.img
+        else
+            unpack_archive $FSIMG /run/initramfs/fsimg/
+        fi
+        losetup $BASE_LOOPDEV /run/initramfs/fsimg/rootfs.img
+        echo "0 $( blockdev --getsize $BASE_LOOPDEV ) linear $BASE_LOOPDEV 0" | dmsetup create live-rw
+    else
+        # mount the filesystem read-only and add a dm snapshot for writes
+        losetup -r $BASE_LOOPDEV $FSIMG
+        do_live_from_base_loop
+    fi
 fi
 
+[ -e "$SQUASHED" ] && umount -l /run/initramfs/squashfs
+
 if [ -b "$OSMIN_LOOPDEV" ]; then
     # set up the devicemapper snapshot device, which will merge
     # the normal live fs image, and the delta, into a minimzied fs image
diff --git a/modules.d/90lvm/module-setup.sh b/modules.d/90lvm/module-setup.sh
index c799a1c..8269078 100755
--- a/modules.d/90lvm/module-setup.sh
+++ b/modules.d/90lvm/module-setup.sh
@@ -67,6 +67,20 @@ install() {
             sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
             sed -i -e 's/\(^[[:space:]]*\)use_lvmetad[[:space:]]*=[[:space:]]*[[:digit:]]/\1use_lvmetad = 0/' ${initdir}/etc/lvm/lvm.conf
         fi
+
+        export LVM_SUPPRESS_FD_WARNINGS=1
+        # Also install any files needed for LVM system id support.
+        if [ -f /etc/lvm/lvmlocal.conf ]; then
+            inst_simple -H /etc/lvm/lvmlocal.conf
+        fi
+        eval $(lvm dumpconfig global/system_id_source)
+        if [ "$system_id_source" == "file" ]; then
+            eval $(lvm dumpconfig global/system_id_file)
+            if [ -f "$system_id_file" ]; then
+                inst_simple -H $system_id_file
+            fi
+        fi
+        unset LVM_SUPPRESS_FD_WARNINGS
     fi
 
     if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then
diff --git a/modules.d/98systemd/module-setup.sh b/modules.d/98systemd/module-setup.sh
index 51ea288..761349f 100755
--- a/modules.d/98systemd/module-setup.sh
+++ b/modules.d/98systemd/module-setup.sh
@@ -176,7 +176,11 @@ install() {
     # install adm user/group for journald
     inst_multiple nologin
     egrep '^systemd-journal:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^wheel:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
+    egrep '^adm:' "$initdir/etc/passwd" 2>/dev/null >> "$initdir/etc/passwd"
     egrep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
+    egrep '^wheel:' /etc/group >> "$initdir/etc/group"
+    egrep '^adm:' /etc/group >> "$initdir/etc/group"
 
     ln_r $systemdutildir/systemd "/init"
     ln_r $systemdutildir/systemd "/sbin/init"
diff --git a/modules.d/99base/dracut-lib.sh b/modules.d/99base/dracut-lib.sh
index 5c1504f..079c9a2 100755
--- a/modules.d/99base/dracut-lib.sh
+++ b/modules.d/99base/dracut-lib.sh
@@ -1286,8 +1286,8 @@ show_memstats()
 remove_hostonly_files() {
     rm -fr /etc/cmdline /etc/cmdline.d/*.conf
     if [ -f /lib/dracut/hostonly-files ]; then
-        while read line; do
-            [ -e "$line" ] || continue
+        while read -r line; do
+            [ -e "$line" ] || [ -h "$line" ] || continue
             rm -f "$line"
         done < /lib/dracut/hostonly-files
     fi