diff --git a/correct-paths-for-opensuse.patch b/correct-paths-for-opensuse.patch
index a13c43b..3a6870b 100644
--- a/correct-paths-for-opensuse.patch
+++ b/correct-paths-for-opensuse.patch
@@ -1,6 +1,6 @@
---- dracut-027_git201305310800.orig/dracut.sh
-+++ dracut-027_git201305310800/dracut.sh
-@@ -627,7 +627,7 @@ stdloglvl=$((stdloglvl + verbosity_mod_l
+--- dracut-029_git201307171236.orig/dracut.sh
++++ dracut-029_git201307171236/dracut.sh
+@@ -643,7 +643,7 @@ stdloglvl=$((stdloglvl + verbosity_mod_l
  [[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
  [[ $lvmconf_l ]] && lvmconf=$lvmconf_l
  [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
@@ -9,9 +9,9 @@
  [[ $tmpdir_l ]] && tmpdir="$tmpdir_l"
  [[ $tmpdir ]] || tmpdir=/var/tmp
  [[ $compress_l ]] && compress=$compress_l
---- dracut-027_git201305310800.orig/modules.d/10i18n/module-setup.sh
-+++ dracut-027_git201305310800/modules.d/10i18n/module-setup.sh
-@@ -85,6 +85,8 @@ install() {
+--- dracut-029_git201307171236.orig/modules.d/10i18n/module-setup.sh
++++ dracut-029_git201307171236/modules.d/10i18n/module-setup.sh
+@@ -94,6 +94,8 @@ install() {
  
      install_base() {
          dracut_install setfont loadkeys kbd_mode stty
@@ -20,8 +20,8 @@
  
          if ! dracut_module_included "systemd"; then
              inst ${moddir}/console_init.sh /lib/udev/console_init
---- dracut-027_git201305310800.orig/modules.d/50plymouth/module-setup.sh
-+++ dracut-027_git201305310800/modules.d/50plymouth/module-setup.sh
+--- dracut-029_git201307171236.orig/modules.d/50plymouth/module-setup.sh
++++ dracut-029_git201307171236/modules.d/50plymouth/module-setup.sh
 @@ -12,12 +12,12 @@ depends() {
  }
  
@@ -38,8 +38,8 @@
      fi
  
      inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
---- dracut-027_git201305310800.orig/modules.d/90kernel-modules/module-setup.sh
-+++ dracut-027_git201305310800/modules.d/90kernel-modules/module-setup.sh
+--- dracut-029_git201307171236.orig/modules.d/90kernel-modules/module-setup.sh
++++ dracut-029_git201307171236/modules.d/90kernel-modules/module-setup.sh
 @@ -74,7 +74,7 @@ installkernel() {
  }
  
@@ -49,8 +49,8 @@
      [[ $hostonly ]] && dracut_install -o /etc/modprobe.d/*.conf /etc/modprobe.conf
      if ! dracut_module_included "systemd"; then
          inst_hook cmdline 01 "$moddir/parse-kernel.sh"
---- dracut-027_git201305310800.orig/modules.d/95udev-rules/module-setup.sh
-+++ dracut-027_git201305310800/modules.d/95udev-rules/module-setup.sh
+--- dracut-029_git201307171236.orig/modules.d/95udev-rules/module-setup.sh
++++ dracut-029_git201307171236/modules.d/95udev-rules/module-setup.sh
 @@ -11,6 +11,8 @@ install() {
      dracut_install udevadm cat uname blkid \
          /etc/udev/udev.conf
@@ -60,8 +60,8 @@
      [ -d ${initdir}/$systemdutildir ] || mkdir -p ${initdir}/$systemdutildir
      for _i in ${systemdutildir}/systemd-udevd ${udevdir}/udevd /sbin/udevd; do
          [ -x "$_i" ] || continue
---- dracut-027_git201305310800.orig/modules.d/98systemd/rescue.service
-+++ dracut-027_git201305310800/modules.d/98systemd/rescue.service
+--- dracut-029_git201307171236.orig/modules.d/98systemd/rescue.service
++++ dracut-029_git201307171236/modules.d/98systemd/rescue.service
 @@ -16,7 +16,7 @@ Environment=HOME=/
  Environment=DRACUT_SYSTEMD=1
  Environment=NEWROOT=/sysroot
@@ -69,5 +69,5 @@
 -ExecStartPre=-/bin/plymouth quit
 +ExecStartPre=-/usr/bin/plymouth quit
  ExecStart=-/bin/sh -i -l
- ExecStopPost=-/bin/rm -f /.console_lock
+ ExecStopPost=-/bin/rm -f -- /.console_lock
  ExecStopPost=-/usr/bin/systemctl --fail --no-block default
diff --git a/dracut-029.tar.xz b/dracut-029.tar.xz
deleted file mode 100644
index a627ddb..0000000
--- a/dracut-029.tar.xz
+++ /dev/null
@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:5623e4fbcb14737ae76baf97736e4b2a0b4bc037dfb572de6021ffbd37928c59
-size 228272
diff --git a/dracut-029_git201307171236.tar.xz b/dracut-029_git201307171236.tar.xz
new file mode 100644
index 0000000..78f79d2
--- /dev/null
+++ b/dracut-029_git201307171236.tar.xz
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:01f1bd815e2c6b3622140b62631aedc4751469f0342b4c8aa10078d3a9048797
+size 207144
diff --git a/dracut.changes b/dracut.changes
index c72c1ff..2d0e8f2 100644
--- a/dracut.changes
+++ b/dracut.changes
@@ -1,3 +1,15 @@
+-------------------------------------------------------------------
+Sun Jul 21 17:17:58 UTC 2013 - tittiatcoke@gmail.com
+
+- Remove the http link for the Source0. Git snapshots can 
+  not be obtained that way. 
+  
+-------------------------------------------------------------------
+Wed Jul 17 20:25:58 UTC 2013 - crrodriguez@opensuse.org
+
+- Version 029_git201307171236
+* support early microcode loading in x86
+
 -------------------------------------------------------------------
 Thu Jun 27 19:41:46 UTC 2013 - crrodriguez@opensuse.org
 
diff --git a/dracut.spec b/dracut.spec
index b70384b..2b8fdd2 100644
--- a/dracut.spec
+++ b/dracut.spec
@@ -21,7 +21,7 @@
 %define replace_mkinitrd 0
 
 Name:           dracut
-Version:        029
+Version:        029_git201307171236
 Release:        0
 
 Summary:        Initramfs generator using udev
@@ -30,7 +30,7 @@ Group:          System/Base
 Url:            https://dracut.wiki.kernel.org/
 # Source can be generated by
 # http://git.kernel.org/?p=boot/dracut/dracut.git;a=snapshot;h=%{version};sf=tgz
-Source0:        http://www.kernel.org/pub/linux/utils/boot/dracut/dracut-%{version}.tar.xz
+Source0:        dracut-%{version}.tar.xz
 # openSUSE / SLE module to convert initrd command line parameters to dracut one
 # (not to be upstreamed)
 Source1:        module-setup-initrd.sh
@@ -74,6 +74,9 @@ Requires:       util-linux >= 2.21
 Requires:       xz
 Recommends:     binutils
 Requires:       pigz
+%ifarch %ix86 x86_64
+Requires:       microcode_ctl
+%endif
 %{?systemd_requires}
 
 %description
@@ -160,7 +163,9 @@ touch %{buildroot}%{_localstatedir}/log/dracut.log
 #mkdir -p %{buildroot}%{_localstatedir}/initramfs
 
 install -m 0644 dracut.conf.d/suse.conf.example   %{buildroot}%{_sysconfdir}/dracut.conf.d/01-dist.conf
-
+%ifarch %ix86 x86_64
+echo 'early_microcode="yes"' > %{buildroot}%{_sysconfdir}/dracut.conf.d/02-early-microcode.conf
+%endif
 %if !%{replace_mkinitrd}
 rm %{buildroot}/etc/bash_completion.d/lsinitrd
 rm %{buildroot}%{_bindir}/mkinitrd
@@ -198,6 +203,9 @@ rm -rf %{buildroot}
 %if 0%{?fedora} || 0%{?suse_version} || 0%{?rhel}
 %config %{_sysconfdir}/dracut.conf.d/01-dist.conf
 %endif
+%ifarch %ix86 x86_64
+%{_sysconfdir}/dracut.conf.d/02-early-microcode.conf
+%endif
 %dir %{_sysconfdir}/dracut.conf.d
 %{_mandir}/man8/dracut.8*
 %if %{replace_mkinitrd}
diff --git a/use_all_paths_udev.patch b/use_all_paths_udev.patch
index dca6a15..667255a 100644
--- a/use_all_paths_udev.patch
+++ b/use_all_paths_udev.patch
@@ -1,8 +1,6 @@
-Index: dracut-027_git201304121327/dracut-functions.sh
-===================================================================
---- dracut-027_git201304121327.orig/dracut-functions.sh
-+++ dracut-027_git201304121327/dracut-functions.sh
-@@ -926,7 +926,7 @@ inst_rules() {
+--- dracut-029_git201307171236.orig/dracut-functions.sh
++++ dracut-029_git201307171236/dracut-functions.sh
+@@ -955,7 +955,7 @@ inst_rules() {
      inst_dir "$_target"
      for _rule in "$@"; do
          if [ "${_rule#/}" = "$_rule" ]; then
diff --git a/use_initrd_insteadof_initramfs.patch b/use_initrd_insteadof_initramfs.patch
index c951de8..78019e2 100644
--- a/use_initrd_insteadof_initramfs.patch
+++ b/use_initrd_insteadof_initramfs.patch
@@ -1,5 +1,5 @@
---- dracut-027_git201305310800.orig/dracut.8.asc
-+++ dracut-027_git201305310800/dracut.8.asc
+--- dracut-029_git201307171236.orig/dracut.8.asc
++++ dracut-029_git201307171236/dracut.8.asc
 @@ -18,7 +18,7 @@ DESCRIPTION
  Create an initramfs <image> for the kernel with the version <kernel version>.
  If <kernel version> is omitted, then the version of the actual running
@@ -18,8 +18,8 @@
  contains the kernel modules of the currently active kernel with version
  _++<kernel version>++_.
  
---- dracut-027_git201305310800.orig/dracut.asc
-+++ dracut-027_git201305310800/dracut.asc
+--- dracut-029_git201307171236.orig/dracut.asc
++++ dracut-029_git201307171236/dracut.asc
 @@ -153,7 +153,7 @@ To create a initramfs image, the most si
  
  This will generate a general purpose initramfs image, with all possible
@@ -107,8 +107,8 @@
  ----
  
  This will reduce the size of the initramfs image significantly.
---- dracut-027_git201305310800.orig/dracut-initramfs-restore.sh
-+++ dracut-027_git201305310800/dracut-initramfs-restore.sh
+--- dracut-029_git201307171236.orig/dracut-initramfs-restore.sh
++++ dracut-029_git201307171236/dracut-initramfs-restore.sh
 @@ -11,7 +11,7 @@ KERNEL_VERSION="$(uname -r)"
  if [[ $MACHINE_ID ]] && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
      IMG="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
@@ -118,9 +118,9 @@
  
  cd /run/initramfs
  
---- dracut-027_git201305310800.orig/dracut.sh
-+++ dracut-027_git201305310800/dracut.sh
-@@ -484,7 +484,7 @@ if ! [[ $outfile ]]; then
+--- dracut-029_git201307171236.orig/dracut.sh
++++ dracut-029_git201307171236/dracut.sh
+@@ -490,7 +490,7 @@ if ! [[ $outfile ]]; then
      if [[ $MACHINE_ID ]] && ( [[ -d /boot/${MACHINE_ID} ]] || [[ -L /boot/${MACHINE_ID} ]] ); then
          outfile="/boot/${MACHINE_ID}/$kernel/initrd"
      else
@@ -129,8 +129,8 @@
      fi
  fi
  
---- dracut-027_git201305310800.orig/mkinitrd-dracut.sh
-+++ dracut-027_git201305310800/mkinitrd-dracut.sh
+--- dracut-029_git201307171236.orig/mkinitrd-dracut.sh
++++ dracut-029_git201307171236/mkinitrd-dracut.sh
 @@ -11,7 +11,7 @@ usage () {
      $cmd "       [--nocompress]"
      $cmd "       <initrd-image> <kernel-version>"
@@ -140,8 +140,8 @@
  
      [[ $1 = '-n' ]] && exit 0
      exit 1
---- dracut-027_git201305310800.orig/lsinitrd.1.asc
-+++ dracut-027_git201305310800/lsinitrd.1.asc
+--- dracut-029_git201307171236.orig/lsinitrd.1.asc
++++ dracut-029_git201307171236/lsinitrd.1.asc
 @@ -18,7 +18,7 @@ DESCRIPTION
  -----------
  lsinitrd shows the contents of an initramfs image. if <image> is omitted, then
@@ -151,8 +151,8 @@
  
  OPTIONS
  -------
---- dracut-027_git201305310800.orig/lsinitrd.sh
-+++ dracut-027_git201305310800/lsinitrd.sh
+--- dracut-029_git201307171236.orig/lsinitrd.sh
++++ dracut-029_git201307171236/lsinitrd.sh
 @@ -84,7 +84,7 @@ else
          && [[ -d /boot/${MACHINE_ID} || -L /boot/${MACHINE_ID} ]] ; then
          image="/boot/${MACHINE_ID}/${KERNEL_VERSION}/initrd"
@@ -162,8 +162,8 @@
      fi
  fi
  
---- dracut-027_git201305310800.orig/51-dracut-rescue-postinst.sh
-+++ dracut-027_git201305310800/51-dracut-rescue-postinst.sh
+--- dracut-029_git201307171236.orig/51-dracut-rescue-postinst.sh
++++ dracut-029_git201307171236/51-dracut-rescue-postinst.sh
 @@ -18,7 +18,7 @@ fi
  [[ $MACHINE_ID ]] || exit 1
  [[ -f $KERNEL_IMAGE ]] || exit 1
diff --git a/use_sysconfig_values_correctly.patch b/use_sysconfig_values_correctly.patch
index b4976ac..6866050 100644
--- a/use_sysconfig_values_correctly.patch
+++ b/use_sysconfig_values_correctly.patch
@@ -1,8 +1,6 @@
-Index: dracut-027_git201304121327/modules.d/10i18n/module-setup.sh
-===================================================================
---- dracut-027_git201304121327.orig/modules.d/10i18n/module-setup.sh
-+++ dracut-027_git201304121327/modules.d/10i18n/module-setup.sh
-@@ -146,6 +146,9 @@ install() {
+--- dracut-029_git201307171236.orig/modules.d/10i18n/module-setup.sh
++++ dracut-029_git201307171236/modules.d/10i18n/module-setup.sh
+@@ -155,6 +155,9 @@ install() {
          # Gentoo user may have KEYMAP set to something like "-u pl2",
          KEYMAP=${KEYMAP#-* }