- Update dracut to 037
* Add --hostonly_cmdline switch
* Update --mount syntax
* Include modules from /updates directory
* Fixes for network setup
* Some small fixes
- Rediff patches
- Include iscsiuio again (bnc#872474)
Remove: remove-iscsiuio.patch
- Install 59-scsi-sg_utils.rules (bnc#872478)
Add: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch
- Install 67-kpartx-compat.rules (bnc#872662)
Add: 0016-90multipath-add-67-kpartx-compat.rules.patch
- Install separate multipath service file (bnc#871610)
Add: 0017-90multipath-install-dracut-specific-service-file.patch
- Do not fsck and mount from fstab if systemd is used (bnc#
Add: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch
- Fixup initqueue for remote-fs
Add: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch
OBS-URL: https://build.opensuse.org/request/show/229484
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=124
- Merge all dracut-* packages to one dracut.rpm package.
Subpackages only had one or two minor files not worth splitting a package
or dracut-network had important modules which should (like former main
dracut package) always get installed
- libcap does not exist and libcap2 or friends are not needed
-> remove Requires: libcap
- Reorder (sort) the files section a bit
OBS-URL: https://build.opensuse.org/request/show/224659
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=108
- Make sure that --add-drivers is not called with whitespace string which
will lead to a "read line" user input request and things may get stuck at
installation.
- Add: dracut-fix-whitespace-add-drivers_call.patch
- Remove s390 grub module again -> this will go into grub2 package
(ask rw@suse.de for details)
Delete/remove: s390_add-user-space-grub-rule.patch
- Add installkernel script which installs the kernel when:
make install
is invoked. The script from mkinitrd has been taken over and adopted.
Added source: dracut-installkernel
bnc#862990
OBS-URL: https://build.opensuse.org/request/show/224246
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=105
Add: dracut_do_not_update_booloader_if_no_kernel_is_found.patch
Adding:
Requires: systemd-sysvinit
which has reboot, halt and other binaries dracut likes to add to the initrd.
Cleanup and adjust to latest mainline:
Dropping as these are included in the latest update_git_v034_to_head patch:
Drop: 0001-95dasd-Install-kernel-modules-only-once.patch
Drop: 0002-95dasd-Only-install-module-if-normalize_dasd_arg-is-.patch
Drop: 0003-95dasd_mod-make-dasd_cio_free-optional.patch
Drop: 0004-95zfcp-Make-installation-optional.patch
Drop: 0005-95znet-Make-installation-optional.patch
Drop: 0007-Fixup-keymap-setting-for-openSUSE.patch
Drop: 0008-Add-DASD-configuration-for-SuSE.patch
Drop: 0009-Add-zfcp-scripts-for-SUSE.patch
Drop: 0010-Make-logfile-configurable.patch
Drop: 0011-mkinitrd-suse-Add-SUSE-compability-wrapper-for-dracu.patch
Drop: 0012-mkinitrd-suse.8.asc-Add-manpage-for-SUSE-compat-mkin.patch
Drop: 0015-Fixup-script-permissions.patch
Drop: 0016-Remove-shebang-from-shell-completion-files.patch
Drop: dracut-git-update.patch
Rebase: 0013-Correct-paths-for-openSUSE.patch
This is a rename of dracut-git-update.patch to:
Add: dracut_git_v034_to_head.patch
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=87
- Update with patches from git repository:
* kernel-modules: add ohci-pci to the list of forced module installs
* Run 'xz' and 'lzma' with multiple threads
* systemd: do not exit the initqueue, if systemd asks a password
* iscsi,nbd: do not fail in hostonly mode
* dracut-functions.sh: Avoid loading unnecessary 32-bit libraries
for 64-bit initrds
* fips: also install /etc/system-fips in the initramfs
* dracut.modules.7.asc: removed empty section
* dracut.sh: fixed PATH shortener
* dracut.spec: move /sbin/dracut to /usr/sbin/dracut
* iscsi/nbd: do not try to mount the whole disk, if root= is missing
* fips: include crct10dif_generic
* Handle crypto modules with and without modaliases
* usrmount/module-setup.sh: fixed typo
* lvm: always install thin utils for lvm
* kernel-modules(ARM): add mmc_block usb_storage to static list of
kernel mods
* dracut-functions.sh:check_block_and_slaves*() skip LVM internal devs
* mkdir basic dirs in /run
* network/fcoe: only redirect output to loginit.pipe, if exists
* dracut.sh: no need to make subdirs in run
* dracut.sh: also mkdir /run/lock, which is copied to
* lvm: fix thin recognition
* Add lzo, lz4 compression and read INITRD_COMPRESS
* remove resume-genrules.sh
* resume: fix swap detection in hostonly
* base/init.sh: also mkdir /run/lock
* dmsquash-live: add /dev/mapper/live-base
* Doc: cleanup, extend and split and reuse
OBS-URL: https://build.opensuse.org/request/show/208892
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=82
- Remove all patches which went mainline
- Fix missing root fs slash in lib/udev/rules.d resulting in:
/var/tmp/initramfs.Lusf6flib/udev/rules.d
- bcache: removed, it's in the upstream bcache-tools package
mainline git commit: 49268028b90f6344f79e3510d2
- Fix bad she-bang in mkinitrd_setup_dummy
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=67
- Add ACPI table override ability
- Adjust mkinitrd-dracut.sh to SUSE mkinitrd:
<none> : Before gives a "usage" error -> now scans /boot for kernels
and builds corresponding inirtrds for them
-i -k : Pass a list of kernels and initrd targets
(not sure it was worth the hassle to be able to pass)
-b : Boot directory to search for kernel images
-d : Change root file system. Not tested whether dracut's behavior
matches exactly what our mkinitrd does.
-s : Dummy (should even be obsolete in latest mkinitrd)
- Write caller and used parameters to syslog if mkinitrd is called.
So that those can easily be fixed and checked for correctness.
This should get reverted again before a bigger release.
OBS-URL: https://build.opensuse.org/request/show/201877
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=56
- save a few seconds on boot by always including the autofs4
kernel module in the initrd
- dracut 033
- improved hostonly device recognition
- improved hostonly module recognition
- do not install udev rules from /etc in generic mode
- fixed LABEL= parsing for swap devices
- fixed iBFT network setup
- removed caching of kernel cmdline
- bcache: support new blkid
- ifup with dhcp, if no "ip=" specified for the interface
- fixed ifup udev rules
OBS-URL: https://build.opensuse.org/request/show/200059
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=54
- After testing, we need to correct a major problem, /usr/bin/mount
most be installed in /bin/mount on the initrd otherwise boot fails.
- version 032
- add parameter --print-cmdline
- dracut now creates the initramfs without udevadm
that means the udev database does not have to populated
and the initramfs can be built in a chroot with
/sys /dev /proc mounted.
- renamed dracut_install() to inst_multiple() for consistent naming
- if $libdirs is unset, fall back to ld.so.cache paths
- always assemble /usr device in initramfs
- bash module added (disable it, if you really want dash)
- continue to boot, if the main loop times out, in systemd mode
- removed inst*() shell pure versions, dracut-install binary is in charge now
- fixed ifcfg file generation for vlan
- do not include adjtime and localtime anymore
- fixed generation of zfcp.conf of CMS setups
- install vt102 terminfo
- dracut_install() is still there for backwards compat
- do not strip files in FIPS mode
- fixed iBFT interface configuration
- fs-lib: install fsck and fsck.ext*
- shutdown: fixed killall_proc_mountpoint()
- network: also wait for ethernet interfaces to setup
- fixed checking for FIPS mode
- version 031_git201308011055
* systemd: add support for kmod static devnodes
* crypt: Wait for udev to settle before unlocking disk
OBS-URL: https://build.opensuse.org/request/show/197948
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=52
- dracut-026
- introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory
/usr/lib/dracut/dracut.conf.d/*.conf can be overwritten by the same
filenames in /etc/dracut.conf.d.
Packages should use /usr/lib/dracut/dracut.conf.d rather than
/etc/dracut.conf.d for drop-in configuration files.
/etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator.
- uses systemd-198 native initrd units
- totally rely on the fstab-generator in systemd mode for block devices
- dracut systemd now uses dracut.target rather than basic.target
- dracut systemd services optimize themselves away
- fixed hostonly parameter generation
- turn off curl globbing (fixes IPv6)
- modify the udev rules on install and not runtime time
- enable initramfs building without kernel modules (fixed regression)
- in the initqueue/timeout,
reset the main loop counter, as we see new udev events or initqueue/work
- fixed udev rule installation
OBS-URL: https://build.opensuse.org/request/show/158774
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=19
- Update to 025_git201302211113
* Support out-of-tree and updated drivers in initramfs creation
* shutdown: call "losetup -D" on shutdown
* Mount /proc before including dracut-lib.sh.
* dracut.sh: make /var/log a symlink to /run/log
* systemd/dracut-pre-pivot.sh: remove /dev/root symlink after shell
* kernel-modules: Add ehci support for kernel 3.8+
* Other bugfixes
OBS-URL: https://build.opensuse.org/request/show/156022
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=17
- Update to release 023:
+ resume from hibernate fixes
+ -N option for --no-hostonly
+ support for systemd crypto handling
+ new dracut module "crypt-loop"
+ deprecate the old kernel command line options
+ more documentation
+ honor CFLAGS for dracut-install build
+ multipath fixes
+ / is mounted according to rootflags parameter but forced ro at
first. Later it is remounted according to /etc/fstab +
rootflags parameter and "ro"/"rw".
+ support for xfs / reiserfs separate journal device
+ new "ro_mnt" option to force ro mount of / and /usr
+ root on cifs support
+ dracut-install: fixed issue for /var/tmp containing a symlink
+ only lazy resolve with ldd, if the /var/tmp partition is not
mounted with "noexec".
+ i18n: fixed inclusion of "include" keymaps
- Drop dracut_makefile_cflags_pass.patch and separate-journal.patch
(merged upstream)
OBS-URL: https://build.opensuse.org/request/show/129591
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=3
- Update to release 022:
+ fixed host-only kernel module bug
- Changes from release 021:
+ fixed systemd in the initramfs (requires systemd >= 187)
+ dracut-install: massive speedup with /var on the same
filesystem with COW copy.
+ dracut-install: moved to /usr/lib/dracut until it becomes a
general purpose toot
+ new options: "rd.usrmount.ro" and "rd.skipfsck"
+ less mount/umount
+ apply "ro" on the kernel command line also to /usr
+ mount according to fstab, if neither "ro" or "rw" is specified
+ skip fsck for xfs and btrfs. remount is enough
+ give emergency_shell if /usr mount failed
+ dracut now uses getopt:
- options can be position independent now!!
- we can now use --option=<arg>
+ added option "--kver=<kernel-version>", and the image location
can be omitted : dracut --kver 3.5.0-0.rc7.git1.2.fc18.x86_64
+ dracut.sh: for --include copy also the symbolic links
+ man pages: lsinitrd and mkinitrd added
+ network: We do not support renaming in the kernel namespace
anymore (as udev does that not anymore). So, if a user wants to
use ifname, he has to rename to a custom namespace. "eth[0-9]+"
is not allowed anymore.
+ resume: moved the resume process to the initqueue.
This should prevent accidently mounting the root file system.
+ improve running testsuite
- Clean up package to be openSUSE only package and follow openSUSE
standard.
OBS-URL: https://build.opensuse.org/request/show/129273
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=2
