- Update with patches from git repository:
* kernel-modules: add ohci-pci to the list of forced module installs
* Run 'xz' and 'lzma' with multiple threads
* systemd: do not exit the initqueue, if systemd asks a password
* iscsi,nbd: do not fail in hostonly mode
* dracut-functions.sh: Avoid loading unnecessary 32-bit libraries
for 64-bit initrds
* fips: also install /etc/system-fips in the initramfs
* dracut.modules.7.asc: removed empty section
* dracut.sh: fixed PATH shortener
* dracut.spec: move /sbin/dracut to /usr/sbin/dracut
* iscsi/nbd: do not try to mount the whole disk, if root= is missing
* fips: include crct10dif_generic
* Handle crypto modules with and without modaliases
* usrmount/module-setup.sh: fixed typo
* lvm: always install thin utils for lvm
* kernel-modules(ARM): add mmc_block usb_storage to static list of
kernel mods
* dracut-functions.sh:check_block_and_slaves*() skip LVM internal devs
* mkdir basic dirs in /run
* network/fcoe: only redirect output to loginit.pipe, if exists
* dracut.sh: no need to make subdirs in run
* dracut.sh: also mkdir /run/lock, which is copied to
* lvm: fix thin recognition
* Add lzo, lz4 compression and read INITRD_COMPRESS
* remove resume-genrules.sh
* resume: fix swap detection in hostonly
* base/init.sh: also mkdir /run/lock
* dmsquash-live: add /dev/mapper/live-base
* Doc: cleanup, extend and split and reuse
OBS-URL: https://build.opensuse.org/request/show/208892
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=82
- Remove all patches which went mainline
- Fix missing root fs slash in lib/udev/rules.d resulting in:
/var/tmp/initramfs.Lusf6flib/udev/rules.d
- bcache: removed, it's in the upstream bcache-tools package
mainline git commit: 49268028b90f6344f79e3510d2
- Fix bad she-bang in mkinitrd_setup_dummy
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=67
generalize_early_cpio.patch #PATCH-FIX-UPSTREAM
microcode_cleanup #PATCH-FIX-UPSTREAM
acpi_override.patch #PATCH-FIX-UPSTREAM
- This will replace mkinitrd with dracut as the default initrd generator.
Therefore Prefer: dracut tag in the project config of the repo is needed.
Otherwise OSC does not know how to build installation-images
(needing mkinitrd to build) and which package to take.
- To switch back and try mkinitrd instead of dracut will be:
Uninstall dracut:
- rpm -e dracut --nodeps
And install mkinitrd again:
- zypper install mkinitrd
These patches have been submitted, but now feedback from mainline yet:
mkinitrd_allow_no_option.patch
mkinitrd_allow_multiple_args
quiet_options
implement_default
root_fs
suse_host_only
This patch will never show up mainline and should also get reverted
from SUSE factory repo before the next release shows up:
suse_only_logger
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=57
- Add ACPI table override ability
- Adjust mkinitrd-dracut.sh to SUSE mkinitrd:
<none> : Before gives a "usage" error -> now scans /boot for kernels
and builds corresponding inirtrds for them
-i -k : Pass a list of kernels and initrd targets
(not sure it was worth the hassle to be able to pass)
-b : Boot directory to search for kernel images
-d : Change root file system. Not tested whether dracut's behavior
matches exactly what our mkinitrd does.
-s : Dummy (should even be obsolete in latest mkinitrd)
- Write caller and used parameters to syslog if mkinitrd is called.
So that those can easily be fixed and checked for correctness.
This should get reverted again before a bigger release.
OBS-URL: https://build.opensuse.org/request/show/201877
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=56
- save a few seconds on boot by always including the autofs4
kernel module in the initrd
- dracut 033
- improved hostonly device recognition
- improved hostonly module recognition
- do not install udev rules from /etc in generic mode
- fixed LABEL= parsing for swap devices
- fixed iBFT network setup
- removed caching of kernel cmdline
- bcache: support new blkid
- ifup with dhcp, if no "ip=" specified for the interface
- fixed ifup udev rules
OBS-URL: https://build.opensuse.org/request/show/200059
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=54
- After testing, we need to correct a major problem, /usr/bin/mount
most be installed in /bin/mount on the initrd otherwise boot fails.
- version 032
- add parameter --print-cmdline
- dracut now creates the initramfs without udevadm
that means the udev database does not have to populated
and the initramfs can be built in a chroot with
/sys /dev /proc mounted.
- renamed dracut_install() to inst_multiple() for consistent naming
- if $libdirs is unset, fall back to ld.so.cache paths
- always assemble /usr device in initramfs
- bash module added (disable it, if you really want dash)
- continue to boot, if the main loop times out, in systemd mode
- removed inst*() shell pure versions, dracut-install binary is in charge now
- fixed ifcfg file generation for vlan
- do not include adjtime and localtime anymore
- fixed generation of zfcp.conf of CMS setups
- install vt102 terminfo
- dracut_install() is still there for backwards compat
- do not strip files in FIPS mode
- fixed iBFT interface configuration
- fs-lib: install fsck and fsck.ext*
- shutdown: fixed killall_proc_mountpoint()
- network: also wait for ethernet interfaces to setup
- fixed checking for FIPS mode
- version 031_git201308011055
* systemd: add support for kmod static devnodes
* crypt: Wait for udev to settle before unlocking disk
OBS-URL: https://build.opensuse.org/request/show/197948
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=52
- dracut-026
- introduce /usr/lib/dracut/dracut.conf.d/ drop-in directory
/usr/lib/dracut/dracut.conf.d/*.conf can be overwritten by the same
filenames in /etc/dracut.conf.d.
Packages should use /usr/lib/dracut/dracut.conf.d rather than
/etc/dracut.conf.d for drop-in configuration files.
/etc/dracut.conf and /etc/dracut.conf.d belong to the system administrator.
- uses systemd-198 native initrd units
- totally rely on the fstab-generator in systemd mode for block devices
- dracut systemd now uses dracut.target rather than basic.target
- dracut systemd services optimize themselves away
- fixed hostonly parameter generation
- turn off curl globbing (fixes IPv6)
- modify the udev rules on install and not runtime time
- enable initramfs building without kernel modules (fixed regression)
- in the initqueue/timeout,
reset the main loop counter, as we see new udev events or initqueue/work
- fixed udev rule installation
OBS-URL: https://build.opensuse.org/request/show/158774
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=19
- Update to 025_git201302211113
* Support out-of-tree and updated drivers in initramfs creation
* shutdown: call "losetup -D" on shutdown
* Mount /proc before including dracut-lib.sh.
* dracut.sh: make /var/log a symlink to /run/log
* systemd/dracut-pre-pivot.sh: remove /dev/root symlink after shell
* kernel-modules: Add ehci support for kernel 3.8+
* Other bugfixes
OBS-URL: https://build.opensuse.org/request/show/156022
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=17
