- Update dracut to 037
* Add --hostonly_cmdline switch
* Update --mount syntax
* Include modules from /updates directory
* Fixes for network setup
* Some small fixes
- Rediff patches
- Include iscsiuio again (bnc#872474)
Remove: remove-iscsiuio.patch
- Install 59-scsi-sg_utils.rules (bnc#872478)
Add: 0015-95udev-rules-Add-59-scsi-sg_utils.rules.patch
- Install 67-kpartx-compat.rules (bnc#872662)
Add: 0016-90multipath-add-67-kpartx-compat.rules.patch
- Install separate multipath service file (bnc#871610)
Add: 0017-90multipath-install-dracut-specific-service-file.patch
- Do not fsck and mount from fstab if systemd is used (bnc#
Add: 0018-fstab-do-not-mount-and-fsck-from-fstab-if-using-syst.patch
- Fixup initqueue for remote-fs
Add: 0019-dracut-initqueue-service-runs-before-remote-fs-pre.t.patch
OBS-URL: https://build.opensuse.org/request/show/229484
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=124
- Merge all dracut-* packages to one dracut.rpm package.
Subpackages only had one or two minor files not worth splitting a package
or dracut-network had important modules which should (like former main
dracut package) always get installed
- libcap does not exist and libcap2 or friends are not needed
-> remove Requires: libcap
- Reorder (sort) the files section a bit
OBS-URL: https://build.opensuse.org/request/show/224659
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=108
- Make sure that --add-drivers is not called with whitespace string which
will lead to a "read line" user input request and things may get stuck at
installation.
- Add: dracut-fix-whitespace-add-drivers_call.patch
- Remove s390 grub module again -> this will go into grub2 package
(ask rw@suse.de for details)
Delete/remove: s390_add-user-space-grub-rule.patch
- Add installkernel script which installs the kernel when:
make install
is invoked. The script from mkinitrd has been taken over and adopted.
Added source: dracut-installkernel
bnc#862990
OBS-URL: https://build.opensuse.org/request/show/224246
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=105
Add: dracut_do_not_update_booloader_if_no_kernel_is_found.patch
Adding:
Requires: systemd-sysvinit
which has reboot, halt and other binaries dracut likes to add to the initrd.
Cleanup and adjust to latest mainline:
Dropping as these are included in the latest update_git_v034_to_head patch:
Drop: 0001-95dasd-Install-kernel-modules-only-once.patch
Drop: 0002-95dasd-Only-install-module-if-normalize_dasd_arg-is-.patch
Drop: 0003-95dasd_mod-make-dasd_cio_free-optional.patch
Drop: 0004-95zfcp-Make-installation-optional.patch
Drop: 0005-95znet-Make-installation-optional.patch
Drop: 0007-Fixup-keymap-setting-for-openSUSE.patch
Drop: 0008-Add-DASD-configuration-for-SuSE.patch
Drop: 0009-Add-zfcp-scripts-for-SUSE.patch
Drop: 0010-Make-logfile-configurable.patch
Drop: 0011-mkinitrd-suse-Add-SUSE-compability-wrapper-for-dracu.patch
Drop: 0012-mkinitrd-suse.8.asc-Add-manpage-for-SUSE-compat-mkin.patch
Drop: 0015-Fixup-script-permissions.patch
Drop: 0016-Remove-shebang-from-shell-completion-files.patch
Drop: dracut-git-update.patch
Rebase: 0013-Correct-paths-for-openSUSE.patch
This is a rename of dracut-git-update.patch to:
Add: dracut_git_v034_to_head.patch
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=87
- Update with patches from git repository:
* kernel-modules: add ohci-pci to the list of forced module installs
* Run 'xz' and 'lzma' with multiple threads
* systemd: do not exit the initqueue, if systemd asks a password
* iscsi,nbd: do not fail in hostonly mode
* dracut-functions.sh: Avoid loading unnecessary 32-bit libraries
for 64-bit initrds
* fips: also install /etc/system-fips in the initramfs
* dracut.modules.7.asc: removed empty section
* dracut.sh: fixed PATH shortener
* dracut.spec: move /sbin/dracut to /usr/sbin/dracut
* iscsi/nbd: do not try to mount the whole disk, if root= is missing
* fips: include crct10dif_generic
* Handle crypto modules with and without modaliases
* usrmount/module-setup.sh: fixed typo
* lvm: always install thin utils for lvm
* kernel-modules(ARM): add mmc_block usb_storage to static list of
kernel mods
* dracut-functions.sh:check_block_and_slaves*() skip LVM internal devs
* mkdir basic dirs in /run
* network/fcoe: only redirect output to loginit.pipe, if exists
* dracut.sh: no need to make subdirs in run
* dracut.sh: also mkdir /run/lock, which is copied to
* lvm: fix thin recognition
* Add lzo, lz4 compression and read INITRD_COMPRESS
* remove resume-genrules.sh
* resume: fix swap detection in hostonly
* base/init.sh: also mkdir /run/lock
* dmsquash-live: add /dev/mapper/live-base
* Doc: cleanup, extend and split and reuse
OBS-URL: https://build.opensuse.org/request/show/208892
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=82
- Remove all patches which went mainline
- Fix missing root fs slash in lib/udev/rules.d resulting in:
/var/tmp/initramfs.Lusf6flib/udev/rules.d
- bcache: removed, it's in the upstream bcache-tools package
mainline git commit: 49268028b90f6344f79e3510d2
- Fix bad she-bang in mkinitrd_setup_dummy
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=67
generalize_early_cpio.patch #PATCH-FIX-UPSTREAM
microcode_cleanup #PATCH-FIX-UPSTREAM
acpi_override.patch #PATCH-FIX-UPSTREAM
- This will replace mkinitrd with dracut as the default initrd generator.
Therefore Prefer: dracut tag in the project config of the repo is needed.
Otherwise OSC does not know how to build installation-images
(needing mkinitrd to build) and which package to take.
- To switch back and try mkinitrd instead of dracut will be:
Uninstall dracut:
- rpm -e dracut --nodeps
And install mkinitrd again:
- zypper install mkinitrd
These patches have been submitted, but now feedback from mainline yet:
mkinitrd_allow_no_option.patch
mkinitrd_allow_multiple_args
quiet_options
implement_default
root_fs
suse_host_only
This patch will never show up mainline and should also get reverted
from SUSE factory repo before the next release shows up:
suse_only_logger
OBS-URL: https://build.opensuse.org/package/show/Base:System/dracut?expand=0&rev=57
