------------------------------------------------------------------- Thu Jan 17 07:16:25 UTC 2019 - nwang@suse.com - Update to 9.8.0 * i18n: use propper po files * v9,stacked: allow node-id in stacked section but one should not use stacked with v9 anyways * dry run: remove trailing white space This eases test integration. Mentioned here because strictly speaking output changed. * regression tests: if at ./configure time "clitest" is detected, one can run tests via "make test". Target is a noop otherwise. * drbdsetup,v9: fix wait-for (same patch as in 9.7.1) * doc,v9: require-drbd-module-version-*, events2 --now --poll * drbdadm,v9: allow stacked-on-top-of sections without address * drbdadm,v9: bring up only the correct paths in multi-site scenaios. * drbdadm,v9: fix parser segfault if node-id is missing. * tests: require that they pass on release. * drbdsetup,v9: fix key collision in show --json. - bsc#1121794, use drbd9 man pages. ------------------------------------------------------------------- Wed Dec 5 09:01:02 UTC 2018 - nwang@suse.com - Update to 9.7.0 * drbdadm,v9,v84: fix resync-after * drbd.ocf: connect_only_after_promote, require kernel version * drbdmon: display resync progress * parser,v9: require-drbd-module-version * windrbd: add WinDRBD support ------------------------------------------------------------------- Tue Oct 30 08:05:03 UTC 2018 - nwang@suse.com - bsc#1115606. Update to new upstream release 9.6.0 * usage-count: also count notty users if possible. * drbd-overview: remove it, we have drbdtop/drbdmon. saves all the Perl deps. * drbdmon: update frequency limiting, debug log for drbdevents, use altbuffer,... * drbdsetup show: on 9 allow json output. mainly used in our CI, don't expect a stable field names yet. * drbdsetup satus: on 9 fix json output to not include NaN/Infinity * allow higher resync rates: first customers hit a limit. this requires an updated kernel module as well (e.g., 9.0.16) * init: fix some 8-only leftovers (sh-b-pri), sanitize the retry logic * doc: document various 9 features that got forgotten (e.g., quorum-lost) * build: various small fixes that popped up while playing with meson - Remove patch: skip_sh-b-pri_in_v9.patch fix in ace704aac ------------------------------------------------------------------- Mon Jul 23 03:05:33 UTC 2018 - nwang@suse.com - Update to 9.5.0 * drbdmon: allow to start in problems view (--problems) * drbdadm,v9: fix always failing stacked handlers from kernel * drbdadm,v9: adjust now hands over the information that a diskfull->diskless change was intentional. * drbdadm,v9: adjust verifies now IPs - Remove patch: fix_call_khelper_with_stack.patch in 60ec9fa68 ------------------------------------------------------------------- Thu May 10 09:11:09 UTC 2018 - nwang@suse.com - Update to 9.4.0 * drbdmeta: don't exit with negative return codes * usage counts: only register if we know driver version * drbdsetup,v9: expose detailed verify/resync statistics * drbdsetup,v9,json: saner types for client/peer-client/quorum on --json * drbdsetup,v9: expose client/peer-client in status if !isatty() - Including fix for SLE12SP3: bsc#1064402, remove hardcoded local5 of logfacility bsc#1037109, drbdmeta does not propagate full bitmap ------------------------------------------------------------------- Sun Apr 8 02:43:23 UTC 2018 - nwang@suse.com - bsc#1090167, Update to 9.3.1 * update to Japanese man pages * fixes for stacking in drbd-9.0 * fixes for proxy support in drbd-9.0 * fix adjusting --bitmap=no peer to diskfull * VCS: typos and fixes for stacked resources - Remove upstream patch Fix-no-bitmap-allocate-for-stacked-res.patch - Remove upstream patch Support-pass-force-to-dump-md.patch - Remove patch fix-segfault-up-stacked-resource.patch with upstream fix 74b1cbb274 - drbdadm v84: fixup for disable-write-same - Fix IPv4 & IPv6 address comparisons for 'drbdadm adjust' ------------------------------------------------------------------- Mon Feb 5 07:09:33 UTC 2018 - nwang@suse.com - bsc#1077176, pass the string to backend. - bsc#1058770, fix kernel trace while starting sync stacked drbd - Add patch Fix-no-bitmap-allocate-for-stacked-res.patch - Add patch Support-pass-force-to-dump-md.patch ------------------------------------------------------------------- Mon Jan 22 05:02:12 UTC 2018 - nwang@suse.com - bsc#1076936, from bwiedemann@suse.com. Reproducible builds support merged in upstream, but the changes in spec is lost. ------------------------------------------------------------------- Wed Dec 6 07:19:50 UTC 2017 - nwang@suse.com - bsc#1074169, Update to 9.2.0 * Japanese man pages * initial vertias cluster agent support * quorum integration (including agents) * improve drbd9 (mesh)/drbd-proxy integration * pull fixups from 9.1.1 branch * switch to github * drbdmon: page naviagation * debian: add mount as dependency ------------------------------------------------------------------- Mon Oct 16 09:38:35 UTC 2017 - nwang@suse.com - bsc#1061145, fencing is moved from disk secion to net Add move_fencing_from_disk_to_net_in_example.patch - bsc#1061147, skip running drbdadm sh-b-pri in drbd9 Add skip_sh-b-pri_in_v9.patch ------------------------------------------------------------------- Fri Sep 1 08:13:38 UTC 2017 - nwang@suse.com - Update to 9.1.0 * allow events2 --now polling * fix ambiguous inheritance for peer-device-options * fixup fallback path for BLKZEROOUT for older kernels * fix v9 proxy support * modernized XEN scripts * reproducible builds support * create-md --force for v8.4 (for compat to v9) * fix cstate output * resize: give resize more time (same as attach) * drbdmon: peer-device status, version info, node name * "drbdadm status" for v8.4 * set peer-device-options only once - Remove Update-block-drbd-script-to-support-xen.patch ------------------------------------------------------------------- Fri Aug 25 06:45:36 UTC 2017 - nwang@suse.com - fate#323392, enable drbdmon which imported in 8.9.10 ------------------------------------------------------------------- Fri Aug 11 06:09:20 UTC 2017 - nwang@suse.com - bsc#1052352, support block drbd for legacy format. - Add Update-block-drbd-script-to-support-xen.patch ------------------------------------------------------------------- Tue Jul 25 08:35:18 UTC 2017 - nwang@suse.com - bsc#1048671, Fix handler called from kernel always invalid for stacking resource - Add fix_call_khelper_with_stack.patch ------------------------------------------------------------------- Wed Jun 7 08:13:07 UTC 2017 - nwang@suse.com - Update to v9.0.0 * drbd udev: fix inconsistent inheritance of implicit volumes * Fix regressions of the out-of-the-box DRBD 8.4 experience * DrbdMon: can now focus on "problem" resources * v9: support new option on_no_quorum * drbdadm: fix segfaults, improve error reporting * adjust: fix deleting unrelated peer(s) on "adjust resource:specific-peer" * drbdmeta create-md/convert: fix check for existing external meta-data - Merged into upstream, remove Pass-md_index-information-to-detect_md.patch ------------------------------------------------------------------- Thu Apr 27 06:19:24 UTC 2017 - nwang@suse.com - bsc#1032074, fix Inconsistent metadata after upgrade - Add Pass-md_index-information-to-detect_md.patch * will be merged into upstream in v8.9.12 ------------------------------------------------------------------- Tue Apr 4 12:21:55 UTC 2017 - kgronlund@suse.com - Update to v8.9.11 * No source changes from v8.9.11rc1 ------------------------------------------------------------------- Tue Apr 4 09:25:09 UTC 2017 - kgronlund@suse.com - Disable quorum in default configuration (bsc#1032142) - Add 0001-Disable-quorum-in-default-configuration-bsc-1032142.patch ------------------------------------------------------------------- Fri Mar 24 07:06:02 UTC 2017 - nwang@suse.com - Update to v8.9.11rc1 - OCF resource agent and crm-fence-peer for drbd9 introduce quorum support JSON output fixes set bitmap to 0 on metadata creation - Remove patch support-drbd9-ra.patch Remove patch initialize-node-id-when-create-md.patch - Corresponding user space change of bsc#1031299 ------------------------------------------------------------------- Wed Mar 22 09:10:59 UTC 2017 - nwang@suse.com - Update to v8.9.10 for drbd9.0.6 and drbdmanage - new drbdmon tool drbdadm parser got faster send SIGKILL to childs if parent drbdadm dies compat fixes for linux kernel ------------------------------------------------------------------- Mon Feb 20 16:30:37 CET 2017 - kukuk@suse.de - Remove obsolete Requires for pre/post install sections ------------------------------------------------------------------- Tue Feb 14 07:36:34 UTC 2017 - nwang@suse.com - bsc#1025585, update to v8.9.8 - Remove patch zeroout-discard-devices.patch Remove patch service-mod.patch ------------------------------------------------------------------- Tue Dec 6 08:06:00 UTC 2016 - nwang@suse.com - bsc#1006105, initialize node id when creating md. - Add patch initialize-node-id-when-create-md.patch ------------------------------------------------------------------- Wed Aug 3 03:39:18 UTC 2016 - nwang@suse.com - bsc#990834, remove the warning with experimental. - Add warning when using multiple nodes. ------------------------------------------------------------------- Wed Jun 29 01:54:54 UTC 2016 - nwang@suse.com - bsc#986215, fix segfault of up a DRBD9 stacked resource. - Add patch fix-segfault-up-stacked-resource.patch ------------------------------------------------------------------- Wed Jun 29 01:53:49 UTC 2016 - nwang@suse.com - bsc#986784, fix DRBD9 stacked resource could not started by RA. ------------------------------------------------------------------- Fri Apr 8 13:04:00 UTC 2016 - lchiquitto@suse.de - bsc#972886, add pkg-config as build requirement to ensure udev's rules directory will be detected at build time ------------------------------------------------------------------- Mon Mar 14 08:01:22 UTC 2016 - nwang@suse.com - fate#320495. Support ha resource agent of drbd9. Add patch support-drbd9-ra.patch ------------------------------------------------------------------- Mon Mar 7 08:18:08 UTC 2016 - nwang@suse.com - bsc#955177, fence when another node pacemaker shutdown. add patch fence-after-pacemaker-down.patch ------------------------------------------------------------------- Mon Mar 7 08:13:43 UTC 2016 - nwang@suse.com - Update to v8.9.6 * Call "drbdsetup resize" only as often as necessary on "drbdadm resize" * Disconnect connection first on single path deletion from connection * Add unfence-peer handler * Fix "drbdadm adjust" for proxy configurations ------------------------------------------------------------------- Tue Feb 23 05:19:07 UTC 2016 - nwang@suse.com - bsc#967753. Fix different udev rules folder in Leap and openSUSE. ------------------------------------------------------------------- Thu Dec 24 06:17:48 UTC 2015 - nwang@suse.com - Update to v8.9.5 * add support for new disk option 'rs-discard-granularity' (module v8.4.7) * add support for new disk option 'discard-zeroes-if-aligned' (module v8.4.7) * add support for v9 "path" commands * doc improvements/corrections * improvements to drbd ocf resource agent and pacemaker "constraint based fencing" (crm-fence-peer.sh) * drbd-overview improvements * Add an autoconf switch for building without man pages * Fix compatibility with the musl C library * Introduce the concept of paths within a connection to the config file; add support for paths to drbdadm adjust * Allow multiple connection-mesh statements within one resource * Document peer-device-options on the drbd-9.0 man pages * increase the lower boundary for al-extents from 7 to 67; drbdadm clamps al-extents to 67 implicitly if you configures something lower than 67 * Document the events2 command on the drbd-8.4 man page * Fix environment variables for handlers * Rewrite the parser for configure options; Reuse the data structures describing drbdsetup options * No longer try to set peer-device-options with the connect or attach commands; Only do it with the up and attach commands * Fixed issues with stderr messages might go into arbitrary FDs * Allow recursive includes; drbdadm includes each config file only once * Fix parsing cut-off proxy sections * When converting 8.4 to 9.0 meta-data produce meta-data the drbd9 kernel driver will accept * Obey max-peers for all volumes when creating meta-data * Do not re-register at usage.drbd.org when the module is not loaded when drbdadm is invoked ------------------------------------------------------------------- Tue Nov 3 02:14:24 UTC 2015 - nwang@suse.com - BSC#949045. Remove execute of drbd.service. - Add patch service-mod.patch ------------------------------------------------------------------- Wed Aug 19 09:00:49 UTC 2015 - nwang@suse.com - Fate#317940. Support zeroout/discard instead of zap-devices - Add patch zeroout-discard-devices.patch - Remove zap-devices-xml.patch and zap-devices.patch ------------------------------------------------------------------- Thu Jul 23 02:28:37 UTC 2015 - nwang@suse.com - Add Patch zap-devices-xml.patch and zap-devices.patch for user space entrance to zap-devices of new-current-uuid. - Patch fix-libdir-in-Makefile.patch ------------------------------------------------------------------- Fri Apr 17 06:59:04 UTC 2015 - nwang@suse.com - Upgrade to released v8.9.2 for Fate#317940 * change systemd unit file: basically just call the init script * make some previously hardcoded timeouts configurable * drbdadm: New command peer-device-options * drbd 9: Move max_buffers to net_conf * drbd 9: Log errors to syslog if stderr is not available * init script: fixes for stacked resources * fix regression corner cases in bitmap size calculation * allow create-md to initialize peer-max-bio-size to 1M * drbd 9: make transport selectable * fix aggregating drbdsetup / drbdmeta exit statii * some documentation fixes (content and build) * added direct-connect command * incompatible drbd-9 metadata format change. use: node_id as index for peer_md instead of the bitmap_index * drbdadm/meta/usage_cnt: ensure output is visible * drbdsetup: fix arguments for all commands expecting a peer_device * exit codes: redefine E_USAGE to 1 (not 3) * some build changes * init script: on start, first try to load the module * drbdsetup events2: Improve how timestamps are assigned * udev rules (symlinks in /dev/by-res and by-disk) got fixed * Fixed upper limit for drbd-8.4 activity log entries * many fixes to drbdadm adjust and proxy commands for drbd-9 * rhcs_fence: Do not invoke fence agents in parallel, rewrite in bash * drbdsetup events2 is now also available in drbd-8.4 (backported from drbd-9) * reorganized the repository have common code for drbd-9, drbd-8.4 and drbd-8.3 only once * Fix drbd.ocf for resources without volume 0 ------------------------------------------------------------------- Wed Feb 18 09:16:33 UTC 2015 - rgoldwyn@suse.com - Upgrade to v8.9.2rc2 with _service file for latest git ------------------------------------------------------------------- Wed Dec 17 09:16:21 UTC 2014 - lwang@suse.com - modify spec to set %attr(700,root,root) to %{_sysconfdir}/xen explicitly to avoid mismatch with xen-tools/xen-xend-tools. ------------------------------------------------------------------- Fri Nov 21 07:11:22 UTC 2014 - lwang@suse.com - add to drbd-utils.spec Obsoletes: drbd < 8.4.5 ------------------------------------------------------------------- Fri Nov 7 13:33:42 UTC 2014 - lwang@suse.com - Delete requires for drbd-kmp for drbd driver is built in kernel since 8.4.5 ------------------------------------------------------------------- Sat Oct 11 10:13:33 UTC 2014 - lwang@suse.com - update to drbd-utils-8.9.1 - drbd-utils-8.9.1 * add DRBD systemd service * new configuration options socket-check-timeout and csums-after-crash-only * update xen block-drbd helper: allow for type "phy" * update udev rules and move from /etc/ to /lib/ * fix various regressions/fallout from the kernel/userland package split, re-add scripts drbddisk and drbdupper, re-add "become-on-primary" feature to init script * crm-fence-peer.sh: improve detection of "clean down" * updated fencing scripts stonith_admin-fence-peer.sh and rhcs_fence * improved "proxy" configuration section parsing * added manpage for drbd-overview, minor review of man pages * build: various changes in configure.ac, makefiles, debian/* and spec file - Upstream version cs: 87039e4993dc682232ec6365900ace657e060c73 - Delete patch: add_phy_to_block-drbd.diff: included in upstream latest version ------------------------------------------------------------------- Fri Jul 11 01:53:22 UTC 2014 - lwang@suse.com - created drbd-utils-8.9.0 (drbd tools ) (since 8.4.5 drbd only includes kernel space source) - drbd-utils-8.9.0 * Initial release of unified drbd-utils * Supports drbd drivers 8.3, 8.4 and 9.0 * Ships with man page links defaulting to 8.4 * Fixed offline resizing in drbdmeta; A regression that causes data loss, since meta-data was written with wrong offset. The regression was introduced with 8.4.3 - Upstream version cs: 79677f478d5b0b9bf6ee23cd7f97bc7ca6b99929 - drbd-utils-8.9.0 not support congfigure device name any longer del: fix-udev-for-drbd-start-timeout.patch ------------------------------------------------------------------- - modify drbd.rules by removing NAME and adding SYMLINK in case that configuration has a device name diffrent from kernel node (bnc#878119) add: fix-udev-for-drbd-start-timeout.patch ------------------------------------------------------------------- Tue May 20 09:13:32 UTC 2014 - lmb@suse.com - Packages drbd-xen, drbd-utils, drbd-bash-completion, and drbd-pacemaker were merged into drbd (bnc#878793) ------------------------------------------------------------------- Mon Mar 31 21:44:23 UTC 2014 - rgoldwyn@suse.com - Add Module.supported and preamble (bnc#871132) ------------------------------------------------------------------- Thu Mar 27 03:06:03 UTC 2014 - xli@suse.com - Update to 8.4.4.7 - fix potential BUG_ON in mempool_alloc for older kernels (<2.6.23) - fix cornercase of resync finished detection - fix drbd_ldev_destroy to run exactly once and in worker context - fix spurious detach/disconnect: don't announce WRITE_SAME - fix NULL pointer deref in blk_add_request_payload (DISCARD/TRIM handling in sd) - fix regression: potential NULL pointer dereference - fix regression: potential list corruption - fix regression: potential deadlock in adm functions (drbdsetup) - fix regression: /sbin vs /usr/sbin in scripts - fix race stopping the worker thread - linux 3.13 compatibility - improve adaptive resync controler - reduce bitmap IO during resync - allow write-ordering policy to be bumped up again - trigger tcp_flush_pending_frames() for PING/PING_ACK - new sysfs oldest_requests attribute (may be moved to debugfs) - fix potential segfault in drbdadm adjust - drbdsetup improvements: fix socket buffers; detect modprobe failure - Upstream version cs: 3c1f46cb19993f98b22fdf7e18958c21ad75176d ------------------------------------------------------------------- Tue Mar 4 00:18:04 UTC 2014 - mlatimer@suse.com - Handle drbd devices when presented as phy devices by xenstore with libxl (bnc#865682) ------------------------------------------------------------------- Mon Oct 14 09:27:25 UTC 2013 - lmb@suse.com - Update to official 8.4.4 - drbd: evaluate disk and network timeout on different requests - drbd: Fix a hole in the challange-response connection authentication - drbd: always implicitly close last epoch when idle - drbd: add back some fairness to AL transactions - drbd: keep max-bio size during detach/attach on disconnected primary - drbd: fix a race between start_resync and send_and_submit - drbd: fix deadlock in discard fallback code - Build drbd KMPs. ------------------------------------------------------------------- Thu Oct 10 14:04:56 UTC 2013 - lmb@suse.com - Update to 8.4.4rc2 - fix potential deadlock when concurrently fencing and establishing a connection - fix potential distributed deadlock during verify or resync - fix decoding of bitmap vli rle for device sizes > 64 TB - fix for deadlock when using automatic split-brain-recovery - only fail empty flushes if no good data is reachable - avoid to shrink max_bio_size due to peer re-configuration - fix resume-io after reconnect with broken fence-peer handler - crm-fence-peer: less cib polling, peer-alive detection using crmadmin, and other improvements - OCF RA: avoid too tight pacemaker driven recovery loop on failed promote, implement adjust_master_score parameter - fix too large bursts for very slow resync rates - don't let application IO throttle resync to a stall - Fixed attaching to disks with fixed size external meta-data (This regressions was introduced with 8.4.3) - Fixed a crash when the connection broke at a very exact point in time while a graceful disconnect executes - Support for REQ_DISCARD - Allow parallel promote/demote - Allow online changing of al-stripes and al-stripe-size with the resize command - drbdadm adjust now deals with IP-address changes correctly - Align the internal object model with drbd-9.0 (away from drbd-8.3) - New drbd-proxy option "bwlimit"; allow proxy options on host level - Compiles on Linux v3.10 ------------------------------------------------------------------- Wed Sep 18 09:56:22 UTC 2013 - lmb@suse.com - Update drbd version string in specfile so that a future 8.4.4 check-in will be considered newer than 8.4.4rc1. - Clean-up specfile based on spec-cleaner ------------------------------------------------------------------- Mon Sep 16 11:22:46 UTC 2013 - lmb@suse.com - Update to drbd 8.4.4rc1 - Disable heartbeat support (heartbeat no longer ships on openSUSE) - fix decoding of bitmap vli rle for device sizes > 64 TB - fix for deadlock when using automatic split-brain-recovery - only fail empty flushes if no good data is reachable - avoid to shrink max_bio_size due to peer re-configuration - fix resume-io after reconnect with broken fence-peer handler - fencing script improvements - Fixed attaching to disks with fixed size external meta-data (This regressions was introduced with 8.4.3) - Allow online changing of al-stripes and al-stripe-size with the resize command - drbdadm adjust now deals with IP-address changes correctly - Align the internal object model with drbd-9.0 (away from drbd-8.3) - Do not end up in Unconnected state if the connection breaks at a certain point during the handshake (was introduced with 8.3.12) - Closed a race condition between promoting and connection handshake, that could lead to an inconsistent view of the peer's UUIDS - Fixed a race condition that could lead to a full sync, if connection breaks at a certain point while starting a regular resync - Fixed crm-fence-peer.sh for pacemaker 1.1.8 - Fixed a list corruption for read requests that complete with an error after they were aborted - Fixed a kernel panic if the device size was an exact multiple of 128MiB - Fixed a potential memory allocation during deadlock online resize - Improve the handling of read-errors: Make sure that sectors that had a read error are overwritten with data from the peer on the next resync - Expose the data-generation-uuids through /sys/block/drbdXX/drbd/ - The new flag --peer-max-bio-size for drbdmeta create-md is of use if you plan to use the device for long time without peer - Fixed a potential protocol error and resulting disconnect/reconnect, when a disk fails on the secondary node. (Introduced with 8.4.2) - Do not fail empty flushed on diskless, primary node - Fixed calculation of master scores for single volume and unconfigured resources in the drbd.ocf RA - When the connection breaks during a grace full disconnect DRBD failed to call the eventually configured fence-peer handler. Fixed. - Obey md-barrier setting when changed via the disk-options command - Non blocking queuing of AL-updates; This change significantly improves the number of IOPs in case the workload does not fit into the configured AL size. (Backport from drbd-9) - New options for drbdmeta create-md --al-stripes and --al-stripe-size to create a larger and striped AL - Fixed drbdadm adjust of max-bio-bvecs - Fixed a memory leak of 336 byte per attach/detach cycle - Fix a potential null-pointer deference when configuring invalid resync after dependencies - Fixed IO resuming after connection was established before fence peer handler returned - Fixed an issue in the state engine that could cause state lockup with multiple volumes - Write all pages of the bitmap if it gets moved during an online resize operation. (This issue was introduced with 8.3.10) - Fixed a race condition could cause DRBD to go through a NetworkFailure state during disconnect - Fixed a race condition in the disconnect code path that could lead to a BUG() (introduced with 8.4.0) - Fixed a write ordering problem on SyncTarget nodes for a write to a block that gets resynced at the same time. The bug can only be triggered with a device that has a firmware that actually reorders writes to the same block (merged from 8.3.13) - Fixed a potential deadlock during restart of conflicting writes - Disable the write ordering method "barrier" by default, since it is not possible for a driver to find out if it works reliably since 2.6.36 - All fixes that went into 8.3.13 - Removed a null pointer access when using on-congestion policy on a diskless device - In case of a graceful detach under IO load, wait for the outstanding IO. (As opposed to aborting IOs as a forcefully detach does) - Reinstate disabling AL updates with invalidate-remote (8.4.0 regression) - Reinstate the 'disk-barrier no', 'disk-flushes no', and 'disk-drain no' switches (8.4.0 regression) - Backported the request code from DRBD-9. Improves handling of many corner cases. - Support FLUSH/FUA bio flags - Made the establishing of connections faster - New option 'al-updates no' to disable writing transactions into the - activity log. It is use full if you prefer a full sync after a primary crash, for improved performance of a spread out random write work load - Expose the data generation identifies via sysfs - "--stop" option for online verify to specify a stop sector - Fixed a bug that might cause in kernel list corruption triggered by simultaneous IO on multiple volumes in a single resource - Fixed a bug that might cause a kernel OOPS in the worker thread while the receiver tied to establish a connection (drbd-8.4.0 regression) - Fixed an issue in the receiver that could cause connection triggered by simultaneous IO on multiple volumes in a single resource - Consider the discard-my-data flag for all volumes - Fixed attaching to backing devices that do not support barriers/flushes, when barriers/flushes are not disabled by the configuration. (drbd-8.4.0 regression) - Fixed a rare compatibility issue with DRBD's older than 8.3.7 when negotiating the bio_size - Fixed a rare race condition where an empty resync could stall with if pause/unpause events happen in parallel - Made the re-establishing of connections quicker, if it got a broken pipe once. Previously there was a bug in the code caused it to waste the first successful established connection after a broken pipe event. - crm-fence-peer.sh: Can now deal with multiple DRBD instances being in a master/slave group - Optional load balancing for read requests: new keyword "read-balance" ------------------------------------------------------------------- Mon May 13 10:44:16 CEST 2013 - ohering@suse.de - Make /etc/xen mode 0700 to protect vnc passwords. ------------------------------------------------------------------- Tue Jul 10 07:51:21 UTC 2012 - tserong@suse.com - Don't use /var/lock/subsys in init script (bnc#714643) ------------------------------------------------------------------- Fri Dec 16 03:45:16 UTC 2011 - tserong@suse.com - update to 8.3.11 * Added missing spinlock in compressed bitmap receive (regression introduced in 8.3.10, could lead to "negative" out-of-sync stats and non-terminating resync when "use-rle" is enabled) * Fixed handling of read errors during online verify runs * Fixes for possible distributed deadlocks during online verify and checksum based resync processes * Fixed handling of IO errors with an on-io-error=pass-on policy; the disk state goes to inconsistent * Fixed the behavior in case ping-timeout and ping-int are set to the same value * Fix for connecting on high latency network links * Fixed wrong connection drops ("PingAck did not arrive in time") with asymmetrically congested networks * Fixed state transitions if fence-peer handler returns after connection was established again * Fixes to drbdmeta and drbdsetup for the > 16TByte support * Made negotiation of max_bio_size conservative instead of optimistic * Network timeouts for mirrored write requests are now always enforced, no longer only when the socket is congested ------------------------------------------------------------------- Sun Sep 18 17:17:12 UTC 2011 - jengelh@medozas.de - Remove redundant tags/sections from specfile (cf. packaging guidelines) ------------------------------------------------------------------- Mon Feb 21 14:10:49 UTC 2011 - ro@novell.com - update to 8.3.10 * Fixed a subtle performance degradation that might affected synchronous work loads (databases) (introduced in 8.3.9) * Fixed a locking regression (introduced in 8.3.9) * Fixed on-no-data-accessible for Primary, SyncTarget nodes (Bugz 332) * Progress bar for online verify * Optionally use the resync speed control loop code for the online verify process as well * Added code to detect false positives when using data-integrity-alg * New config option on-congestion and new connection states ahead and behind * Reduced IO latencies during resync, bitmap exchange and temporal states * Only build a single kernel module package on distributions that provide the infrastructure to have kernel version independent modules * On 64bit architectures allow device sizes up to one petabyte - update to 8.3.9 * Fix for possible deadlock on IO error during resync * Fixed a race condition between adding and removing network configuration. Lead to a BUG_ON() when triggered. * Fixed spurious full syncs that could happen after an empty resync and concurrent connection loss. * Fixed spurious full syncs that happened when connection got lost while one node was in WFSyncUUID state (Bugz 318) * Fixed a race in the meta-data update code path, that could lead to forgotten updates to the meta-data. That in fact could lead to unexpected behavior at the next connect * Fixed potential deadlock on detach * Fixed potential data divergence after multiple failures * Implicitly create unconfigured devices which are referenced in sync-after dependencies. * OCF RA now also works with pacemaker 1.1 * Allow BIO sizes of up to 128kByte. Note: In case drbd-proxy is used, at least version 1.0.16 of drbd-proxy is required. * New configuration keyword on-no-data-accessible. Possible values io-error, and suspend-io. The default is "io-error", which matches the previous behavior. * If the fencing policy is set to resource-and-stonith, the primary node will creates the new current UUID _after_ the fencing handler returned. (Before it did immediately) * Rewrote the resync speed control loop code. New configuration parameters c-plan-ahead, c-fill-target, c-delay-target, c-max-rate, c-min-rate. * Disable activity log updates when all blocks of an unconnected device is are out of sync. That can be activated by using "invalidate-remote" on an unconnected primary. * Improved IPv6 support: link local addresses * Improved resync speed display in /proc/drbd ------------------------------------------------------------------- Fri Oct 22 00:40:04 CEST 2010 - ro@suse.de - update to 8.3.8.1 * Revert delay probes, they could potentially lead to stalled resync. Feature is being re-implemented differently * DRBD ocf resource agent now treats hostnames case insensitive - update to 8.3.8 * Do not expose failed local READs to upper layers, regression introduced in 8.3.3 * Fixed support for devices with 4k hard sector size (again) * Fixed a potential Oops in the disconnect code * Fixed a race condition that could cause DRBD to consider the peers disk as Inconstent after resync instead of UpToDate (Bugz 271) * Fixed a reace condition that could cause DRBD to consider the peers disk as Outdated instead of Inconsistent during resync (Bugz 277) * Disallow to start a resync with invalidate / invalidate-remote when the source disk is not UpToDate * Forcing primary works now also for Consistent, not only for Outdated and Inconsistent (Bugz 266) * Improved robustness against corrupt or malicous sector addresses when receiving data * Added the initial-split-brain, it gets called also if the split-brain gets automatically resolved * Added the --assume-clean option for the resize command, it causes drbd to not resync the new storage after an online grow operation * drbdadm: Do not segfault if stacked-on-top-of refers to an undefined res * drbdadm: Do not consider configs with invalid after statements as invalid * drbdadm: Do not segfault if the peer's proxy section is missing * drbdadm: Allow nullglob in include statement * drbdadm: Fixed the use of waitpid * init script: fix insserv headers (Debian 576901) * Gave the receiving code the ability to use multiple BIOs for writing a single data packet; now DRBD works with BIOs up to 32kByte also on LVM devices; from now on the use_bmbv config option does nothing * New command check-resize, that allows DRBD to detect offline resizing and to move internal meta-data accordingly * Added a control loop, that allows DRBD to find auto tune the resync speed, on connections with large queues (drbd-proxy) * --dry-run option for connect; disconnects after sync handshake * --overwrite-data-of-peer got an alias named --force * Improvements to crm-fence-peer * Fixed option parsing and stacking in snapshot-resync-target-lvm.sh * Compiles on 2.6.33 and 2.6.34 - removed patches: 64bit-fixes.diff (upstream/obsolete) ------------------------------------------------------------------- Fri Jun 25 05:39:10 UTC 2010 - tserong@novell.com - Include Linbit RA ------------------------------------------------------------------- Sun Apr 11 14:29:39 CEST 2010 - dmueller@suse.de - remove KMP subpackage, the kernel modules are part of the kernel and don't build out of tree anymore - update to 8.3.7: * Lots of fixes to the new RPM packaging * Lots of fixes to the autoconfig stuff * Following the rename of CONFIG_LBD to CONFIG_LBDAF * Silenced an assert. Could trigger after changing write ordering (Bugz 261) * Fixed a race condition between detach and ongoing IO. Very hard to trigger, caused an OOPS in make_request/drbd_make_request. (Bugz 262) * Fixed a regression in the resync handshake code introduced before 8.3.3. That bug causes DRBD to block during the initial handshake when a partial resync is not possible but a full resync is necessary. Happens very rarely. (Bugz 260) * Do not drop into StandAlone mode when connection is lost during authentication * Corrected a null test in the authentication code, found by conccinelle, thanks to upstream integration. The chance to trigger that was probably 10^-9. * crm-fence-peer.sh is now also usable if DRBD is managed from the xen block helper script * Fixes to the init script's dependencies * Backported cleanups that where contributed to the in kernel DRBD * Allow online resizing of disconnected devices, new option to drbdsetup drbdsetup /dev/drbdX resize --assume-peer-has-space * Allow multiple after options in the syncer section for stacked setups * Correctly process relative paths in include statements in drbd.conf * New option (-t) for drbdadm to test syntax of config snippets * Following Linux upstream changes 2.6.32 (SHASH and in_flight issues) * New /etc/drbd.conf example that suggests the use of /etc/drbd.d/xxx.res * Fixed a regression introduced shortly before 8.3.3, which might case a deadlock in DRBD's disconnect code path. (Bugz 258) * Fixed drbdsetup X resume-io which is needed for the recovery from the effects of broken fence-peer scripts. (Bugz 256) * Do not reduce master score of a current Primary on connection loss, to avoid unnecessary migrations * Do not display the usage count dialog for /etc/inti.d/drbd status ------------------------------------------------------------------- Fri Jan 8 16:54:23 CET 2010 - vuntz@opensuse.org - Remove unneeded glib-devel BuildRequires. ------------------------------------------------------------------- Wed Oct 7 19:16:37 UTC 2009 - aj@suse.de - update to 8.3.4: * Support kernel 2.6.31 * Numerous bug fixes * Support for Infiniband via SDP (sockets direct protocol) - Add build fix from upstream. ------------------------------------------------------------------- Sun Jul 19 21:51:40 CEST 2009 - coolo@novell.com - trying to get installation right ------------------------------------------------------------------- Tue Jul 14 12:13:04 CEST 2009 - teelynn19@aim.com - update to 8.3.2 * For kernel 2.6.30 support - see internal changelog of source ------------------------------------------------------------------- Mon Apr 20 01:13:04 CEST 2009 - ro@suse.de - update to 8.3.1 * Fixed drbdadm invalidate on disconnected devices (reg in 8.2.7) * Fixed a hard to trigger spinlock deadlock when using device stacking with the upper device having a smaller minor number than the lower device. (Bugz 210) * Adding a missing range check in ensure_mdev() * Implemented a congested_fn; the kernel can keep its pdflushes running now * Improvements the connection code for high latency links * Fix for several potential memory leaks when allocating a device * Use an additional meta data bit to store the fact of an old crashed primary * Udev rule that populates /dev/drbd/by-res/ and /dev/drbd/by-disk/ * New timeout option: outdated-wfc-timeout * New drbdmeta option: --ignore-sanity-checks * Include statement for drbd.conf * Improvements to drbd-overview.pl * Fixed snapshot-resync-target-lvm.sh to work with more than 10 devices * Do not force a full resync after a detach on a primary node * Compatibility with Linux 2.6.27, 2.6.28 and 2.6.29 - update to 8.3.0 * Fixed 'sleep with spinlock held' in case online verify found a difference * Fixed error code pathes in request processing. * Fix for stack smashing in drbdmeta * Fixed a bug that could lead to a crash when detaching/attaching on the primary under heavy IO (Bugz 171) * Fixed a bug in the new epoch code (introduced with 8.2.7). Might cause crash at reconnect after connection loss during heavy IO (Bugz 160) * Fixed a bug in drbdsetup that could cause drbdsetup wait-connect to miss the connection event. * Fixed a race condition in the new barrier code. (Reordered barrier ACKs) * Do not rely on blkdev_issue_flush() returning ENOTSUPP * bitmap in unmapped pages = support for devices > 4TByte (was DRBD+) * checksum based resync (was DRBD+) * support for stacked resource (was DRBD+) * Added support for stacked resources to the bash completion stuff * Added missing documentation (manpages) * Fixed drbdadm handlers for stacked resources * Support of drbd-proxy in stacked setups * RedHat cluster suite (rgmanager) integration scripts * Renamed 'state' to 'role' * More build compatibility with older vendor kernels * Added drbd-overview.pl to the packages - update filelist ------------------------------------------------------------------- Tue Jan 13 14:16:41 CET 2009 - dgollub@suse.de - Add kernel-syms-rt to build requires to build SLERT KMPs ------------------------------------------------------------------- Wed Dec 10 13:30:00 CET 2008 - lmb@suse.de - Update with changes from 8a9ba53abe973301639beacc55eec569b43507e5: - Fix buffer overflow and off-by-one errors in drbd user-space token parser (bnc#450883). - Fix resizing of devices. - Fix a NULL pointer dereference in barrier handling. - Handle failing request better. - Race in UUID synchronization. - Fix a call to a blocking function from within a spinlock. - drbd-optflags.patch: removed, is now upstream. ------------------------------------------------------------------- Fri Nov 21 14:00:00 CET 2008 - lmb@suse.de - Update from 8.2.7-rc1 to 8.2.7 proper. - Endianness fixes. - Handle out-of-sequence barrier acks. - Allow DRBD to user other cn_idx values in case our default value is already taken. - Although Primary/Diskless/StandAlone is invalid it is not unconfigured - become UpToDate on both after detach-attach on a connected secondary device pair - 2.6.28 compatibility (needed for SLE11 kernel) - Bugfixes to write barrier handling. ------------------------------------------------------------------- Mon Oct 27 14:00:00 CET 2008 - lmb@suse.de - Include fixes from upstream (0e87a13b63e2ef87af6cfcc0d875721c53f37ed9). - Fixed possible Oops on connection loss during sync handshake. - Latency improvements. - Improved barrier support. ------------------------------------------------------------------- Thu Sep 4 12:13:27 CEST 2008 - lmb@suse.de - Imported some changes from upstream, including: - Made it to compile on Linux-2.6.26 - Fixed online resizing if there is application IO on the fly when the resize is triggered. - Fixed online resizing if it is triggered from the secondary node. - Fixed a possible deadlock in case "become-primary-on-both" is used, and a resync starts - Fixed the invocation of the pri-on-incon-degr handler - Fixed the exit codes of drbdsetup - sock_create_lite() to avoid a socket->sk leak - Auto-tune socket buffers if sndbuf-size is set to zero ------------------------------------------------------------------- Mon Aug 18 18:07:48 CEST 2008 - mrueckert@suse.de - remove outdated options in the fillup_and_insserv call ------------------------------------------------------------------- Mon Aug 18 11:26:43 CEST 2008 - schwab@suse.de - Fix name of completions file. ------------------------------------------------------------------- Tue Jul 15 09:41:31 CEST 2008 - lmb@suse.de - Update to 8.2.6 and include all bugfixes from upstream. - Fix loading of module (bnc#403731). - Include bash completion for drbdadm. - Added the before-resync-target handler. - Fixed the out-of-sync handler. - Added the max-bio-bvecs option to workaround issues in a stack of DRBD/LVM/Xen. - Fix online resizing in case if triggered from secondary. - Includes bugfixes from 8.0.11 -> 8.0.12 branch. ------------------------------------------------------------------- Wed Jun 4 12:04:56 CEST 2008 - ro@suse.de - buildreq xen-tools only on x86,x86_64 ------------------------------------------------------------------- Tue Jun 3 21:57:39 CEST 2008 - coolo@suse.de - avoid packaging a directory of xen-tools with different permissions ------------------------------------------------------------------- Tue Apr 15 15:03:25 CEST 2008 - lmb@suse.de - Update to 8.2.5 (FATE#302403) - Include online-verify + various fixes to it. - Fix races between online-verify and application writes. - Fixed data-integrity-alg features. - Improved latency. - Full support for migration of meta-data from 0.7 -> 0.8. - Fix some more races, bugs, and memory leaks. ------------------------------------------------------------------- Wed Dec 5 15:03:58 CET 2007 - ro@suse.de - hack to compile with 2.6.24 ------------------------------------------------------------------- Tue Sep 18 12:07:34 CEST 2007 - ro@suse.de - do really build a module ------------------------------------------------------------------- Mon Sep 17 14:41:31 CEST 2007 - lmb@suse.de - Update to drbd 8.0.6 for kernel-compatibility (310187) ------------------------------------------------------------------- Wed Apr 4 22:13:20 CEST 2007 - lrupp@suse.de - added module-init-tools to BuildRequires ------------------------------------------------------------------- Fri Mar 30 15:20:11 CEST 2007 - rguenther@suse.de - add flex BuildRequires - add /etc/modprobe.d directory ------------------------------------------------------------------- Fri Mar 30 02:26:42 CEST 2007 - ro@suse.de - added bison to buildreq ------------------------------------------------------------------- Mon Jan 15 09:43:01 CET 2007 - lmb@suse.de - Update to 0.7.23 for Linux kernels >2.6.19. ------------------------------------------------------------------- Mon Oct 30 23:33:13 CET 2006 - lmb@suse.de - Update to the officially released 0.7.22 version. - Implement "freeze_io" feature. - convert-MODULE_PARM.diff: drop unneeded patch. ------------------------------------------------------------------- Fri Oct 6 14:03:21 CEST 2006 - lmb@suse.de - Update to 0.7.22: - In protocol A and B, on connection loss, drbd could "forget" to set certain areas out of sync. - fix races between failure in drbd_send_dblock and concurrently running tl_clear. - fix potential access-afer-free in drbd_dio_end. - fix possible list corruption respective resulting deadlock in receive_DataRequest. - improved the drbd_thread_stop / start code. ------------------------------------------------------------------- Mon Aug 14 21:44:10 CEST 2006 - lmb@suse.de - Update to 0.7.21. * Fixed the "syncer stalled" after reconnect symptom. * Fixed the "stalled in WFParams" after reconnect symptom. The cause of this bug was actually a misuse of the data socket. * Allow to set the uplug_watermark to 1, only usefull for very strange cases. * The GC comparison code failed to start a resync in case the two cluster node failed simultaniously (common power failure). * Fixed DRBD's code to start kernel threads to work on 2.6.17 also. * IOCTL return codes fixed for 32bit userland - 64 bit kernel setups. * New config option "unplug-watermark". * Released the drbd_alloc_ee() / drbd_free_ee() implementation from the DRBD+ branch to the main branch. * Fixed a bug where lc_del() left a list poison in an LRU chache's hash table. The only way to trigger this bug was: up (>>200M), primary, mkfs, resize to 200M, down, up * DRBD now propagates the backing storage's read ahead properties to upper layers. With devices that read very fast, this is important. * GFP_KERNEL was changed to GFP_NOIO in a few places, to make it more save against deadlocks in the memory subsystem. ------------------------------------------------------------------- Thu May 4 17:10:38 CEST 2006 - lmb@suse.de - Import fixes from 0.7.18: - Under high memory pressure it was possible to hit a deadlock on a kmalloc(). Changed the GFP mask, it is no longer possible to deadlock it with memory pressure. - With very unlucky network timing during connect DRBD falls into a connect / drop-connection loop, that as soon as DRBD is in this loop is very stable. This is fixed now, DRBD detects this situation an breaks out of it. - Fix to the init-script. Now it waits until udev has created the device nodes of _all_ resources. - A small fix for the 32bit userland 64bit kernel people, running older kernels. - Improved handling of IO errors during initial read in of the activity log. ------------------------------------------------------------------- Sun Apr 2 20:01:34 CEST 2006 - agruen@suse.de - convert-MODULE_PARM.diff: Convert from the obsolete MODULE_PARM to the new module_param. ------------------------------------------------------------------- Mon Mar 27 17:43:40 CEST 2006 - lmb@suse.de - Fix memory allocation flags for the activity log (GFP_KERNEL -> GFP_NOIO) to avoid possible deadlock. ------------------------------------------------------------------- Mon Mar 6 17:09:05 CET 2006 - lmb@suse.de - Import upstream fixes from 0.7.17: - There was a bug that could cause the activity log to be not applied after a primary crash, when an other size than 127 elements was configured. - There was a bug in the activity log code, that could cause that the latest update to the AL is omitted at recovery time. - The "Marked additional XXKB as out-of-synced based on AL." message showed one one eighth of the real amount. ------------------------------------------------------------------- Thu Feb 16 16:41:19 CET 2006 - lmb@suse.de - Update to 0.7.16, new fixes: - DRBD no longer shrinks an consistent device if it gets connected to an smaller peer or attached to a smaller disk. - There was a bug related to the degr-wcf-timeout config option, it was never used in recent DRBD releases. Fixed. ------------------------------------------------------------------- Fri Feb 3 11:59:29 CET 2006 - agruen@suse.de - drbd.spec: Replace %arch with %_target_cpu. ------------------------------------------------------------------- Thu Feb 2 12:04:52 CET 2006 - ro@suse.de - added KMP subpackage (required with suse_kernel_module_package) ------------------------------------------------------------------- Tue Jan 31 15:04:10 CET 2006 - lmb@suse.de - Change km_drbd to a KMP. - Import fix to deal with serialized recursive calls to generic_make_request() and avoid a deadlock (SVN r2056). ------------------------------------------------------------------- Thu Jan 26 12:25:02 CET 2006 - lmb@suse.de - Compile fix for 2.6.16-rc1. ------------------------------------------------------------------- Wed Jan 25 21:35:35 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Mon Jan 23 17:57:02 CET 2006 - lmb@suse.de - Import some updated documentation. ------------------------------------------------------------------- Tue Dec 20 14:14:54 CET 2005 - lmb@suse.de - Update to 0.7.15. ------------------------------------------------------------------- Thu Dec 1 15:57:58 CET 2005 - lmb@suse.de - Update to 0.7.14/SVN. ------------------------------------------------------------------- Thu Sep 1 12:18:25 CEST 2005 - lmb@suse.de - Switch to stable version 0.7.13. ------------------------------------------------------------------- Thu Jun 30 09:43:19 CEST 2005 - meissner@suse.de - use RPM_OPT_FLAGS correctly. ------------------------------------------------------------------- Mon Feb 21 18:08:00 CET 2005 - lmb@suse.de - Update to upstream 0.8_pre1 (SVN 1763). ------------------------------------------------------------------- Wed Feb 2 18:42:01 CET 2005 - lmb@suse.de - Update to upstream 0.7.10 (1754). ------------------------------------------------------------------- Fri Jan 14 01:32:35 CET 2005 - ro@suse.de - fix typo in specfile ------------------------------------------------------------------- Wed Dec 1 14:51:29 CET 2004 - lmb@suse.de - Update to upstream version 0.7.6. ------------------------------------------------------------------- Mon Sep 20 15:54:07 CEST 2004 - lmb@suse.de - Merge fixes from SLES9 SP1 with STABLE. ------------------------------------------------------------------- Fri Sep 3 15:36:21 CEST 2004 - lmb@suse.de - Realign with upstream. ------------------------------------------------------------------- Fri Aug 27 12:41:43 CEST 2004 - lmb@suse.de - Allow invalidate if cstate to - changed neededforbuild to ------------------------------------------------------------------- Wed Oct 2 14:23:53 CEST 2002 - jg@suse.de - Updated to 0.6.1-pre17, changes: - Merged syncer speedup code by Lars G. Ellenberg - Merged most of Lars' modifications to the ioctl interface - Marged the bug-fixes from the lge-branch - Implemented the TimoutCounter in the meta-data code. - Fixed a bug that could cause lockup of the primary node on SMP systems using a SCSI device for DRBD, it always happened during resynchronisation. (!) - Checking /.buildenv now in buildsystem instead of /etc/*-release ------------------------------------------------------------------- Tue Sep 3 18:18:48 CEST 2002 - jg@suse.de - Init script fixes: - Removed abortion on non existing block devices (may break LVM setups) - Sourcing . /etc/rc.status earlier now - Allowing execution via rcdrbd link ------------------------------------------------------------------- Mon Sep 2 22:09:22 CEST 2002 - jg@suse.de - Incorporated latest changes from CVS - Using lge branch now (syncer much faster) ------------------------------------------------------------------- Wed Aug 21 10:32:08 CEST 2002 - jg@suse.de - Fixed manpage generation (should now even build on ppc64) ------------------------------------------------------------------- Tue Aug 20 11:17:55 CEST 2002 - jg@suse.de - Added PreReq tag ------------------------------------------------------------------- Mon Aug 19 12:07:53 CEST 2002 - kukuk@suse.de - fix compilation on UL ------------------------------------------------------------------- Tue Aug 13 15:28:49 CEST 2002 - jg@suse.de - Added documentation stuff again - Modified init script to comply with LSB ------------------------------------------------------------------- Mon Aug 12 15:18:40 CEST 2002 - jg@suse.de - Updated to latest version from CVS repository - Removed temporary documentation path from Makefile (does not build) ------------------------------------------------------------------- Tue Mar 5 08:38:28 CET 2002 - jg@suse.de - Fixed broken specfile ------------------------------------------------------------------- Mon Mar 4 17:37:13 CET 2002 - jg@suse.de - updated to bugfix release 0.6.1pre10 - Data-corruption bug in SyncAll fixed (was introduced in pre9) - Fixed an OOPS in tl_check_sector() (was introduced in pre9) - Fixed Linux-2.2.x compability (was broken in pre9) - removed documentation patch (not needed anymore) ------------------------------------------------------------------- Wed Feb 20 18:14:04 CET 2002 - jg@suse.de - modified init script to honor inittimeout settings ------------------------------------------------------------------- Wed Feb 20 17:55:05 CET 2002 - jg@suse.de - added -include /usr/src/linux/include/linux/modversions.h to km_drbd Makefile in case CONFIG_MODVERSIONS is set - modified the init script to comply to LSB and to skip the "interactive" part on boot ------------------------------------------------------------------- Tue Feb 12 15:47:56 CET 2002 - jg@suse.de - added -DMODVERSION and -D__SMP__ to km_drbd Makefile (according to kernel configuration) ------------------------------------------------------------------- Fri Feb 1 00:26:06 CET 2002 - ro@suse.de - changed neededforbuild to ------------------------------------------------------------------- Tue Jan 29 18:26:07 CET 2002 - jg@suse.de - updated to 0.6.1-pre9 ------------------------------------------------------------------- Thu Dec 20 10:22:14 CET 2001 - jg@suse.de - replaced insserv call in specfile with respective macro ------------------------------------------------------------------- Wed Dec 19 21:01:42 CET 2001 - jg@suse.de - updated to 0.6.1-pre7 (supports now kernel 2.4) - removed insserv call after installing - removed fillup template - removed some outdated documentation files ------------------------------------------------------------------- Fri Jul 27 17:21:10 MEST 2001 - mt@suse.de - fixed init script to be LSB compliant ------------------------------------------------------------------- Fri Jul 20 12:06:42 CEST 2001 - kukuk@suse.de - changed neededforbuild to - changed neededforbuild to - changed neededforbuild to ------------------------------------------------------------------- Sun Jan 14 11:01:43 CET 2001 - mt@suse.de - added km_drbd subpackage with drbd kernel module source ------------------------------------------------------------------- Fri Dec 1 14:07:17 CET 2000 - mt@suse.de - added mkdir $RPM_BUILD_ROOT/sbin in spec ------------------------------------------------------------------- Fri Dec 1 10:43:41 CET 2000 - kukuk@suse.de - move sbin/init.d -> etc/init.d ------------------------------------------------------------------- Mon Nov 27 12:45:16 CET 2000 - mt@suse.de - fixed link src for rcdrbd in spec file - changed group to Applications/Clustering ------------------------------------------------------------------- Thu Nov 23 09:42:31 CET 2000 - mt@suse.de - removed heartbeat from neededforbuild ------------------------------------------------------------------- Wed Nov 22 13:40:05 CET 2000 - mt@suse.de - changed to LSB installation of run level links ------------------------------------------------------------------- Fri Nov 10 16:01:54 CET 2000 - mt@suse.de - no module build in spec - drbd module is patched into the kernel ------------------------------------------------------------------- Wed Nov 8 10:42:33 CET 2000 - mt@suse.de - new package