------------------------------------------------------------------- Sat Jul 27 06:29:02 UTC 2013 - bugs@vdm-design.de - Update to version 0.8.2b * 1000 new parts! * parts bin 'and' search implemented (use a space to separate terms) * stripboards now with both horizontal and vertical strips plus RS 276-150 layout * active layer button controls which side copper-fill fills * updated French translation (thanks Yvan) * updated German translation * new Bulgarian translation (thanks Nikolay) * a couple more new parts: TI Launchpad Raspberry Pi (rev 2) * bug fixes: Arduino Mega 2560 R3 repaired Teensy 3.0 repaired Raspberry Pi repaired Atmega 5mm tqfp replaced with an 8mm version netlabels were misbehaving when flipped or rotated Lilypad Mainboard no longer missing Generic IC DIP pcb-layer option repaired Autorouter crash eliminated Parts Editor was not saving pin assignments if loaded SVG files had no connector IDs export etchable was missing silk bottom layer removed mystery circles on silk bottom of some custom pcb shapes bug in the Half+ Breadboard part, and a few others ------------------------------------------------------------------- Fri Jun 14 09:40:58 UTC 2013 - bugs@vdm-design.de - Update to version 0.8.0b * pcb view: view sketches from either 'above' or 'below' place THT parts "through" the top or bottom of the board silkscreen bottom layer support new Fritzing Fab price-quote feature drc now checks if connectors on the same part overlap board 'stickyness' is now disabled by default copper fill keepout setting on the ground fill submenu * schematic view improvements (sponsored by Analog Devices Inc.): rotation and flip are enabled for all parts when flipping or rotating parts, text elements remain upright and do not mirror new voltage label and voltage source parts--the older versions are now obsolete * inspector: 'placement' properties grouped together new widgets to display and modify part coordinates and rotation editable comboboxes are now graphically distinct from drop-downs * new parts * other improvements ------------------------------------------------------------------- Tue Feb 26 08:26:00 UTC 2013 - bugs@vdm-design.de - update to version 0.7.12b, now depends on boost-devel * autorouter: remove excess bendpoints * gerber export drill files now visible in MSN Gerber Viewer (set the m.n format to 2.4) * Updated Dutch translation (thanks Davy) * Updated Greek translation (thanks Alexander) * hide individual part silkscreen * imported parts now go to MyParts bin instead of Contrib * PNG export now taking much less disk space (thanks Jerome) * max pin count for generic IC bumped to 128 * handful of fixes to DRC * find part in sketch (text search) * rgb led hole size enlarged * lots of little bug fixes ------------------------------------------------------------------- Fri Jan 04 07:47:00 UTC 2013 - bugs@vdm-design.de - update to version 0.7.11b, depends now on Qt >= 4.7 * new autorouter rarely breaks DRC handles diagonals misses fewer routing possibilities has variable keepout setting (in autorouter settings dialog) * curvy wires now enabled in pcb and schematic views * use shift-wheel to navigate SVGs in the parts editor; wheel events without shift will zoom (or pan) as usual * updated Simplified Chinese translation (thanks Yuelin and Ninjia) * new Bengali translation (thanks Faruk and friends) * improved DRC result highlighting * bug fixes: OCRA font broken under Windows 8 free rotate broken when only top view was active (thanks to Gijs for spotting the connection) ground fill connections to small vias were being clipped annoying offset when dragging a via from the parts bin ------------------------------------------------------------------- Wed Oct 17 07:22:50 UTC 2012 - bugs@vdm-design.de - update to 0.7.10b * new DRC * bug fixes: parts losing 'family' after editing part metadata (leading to "swapping is broken" message) SMD on bottom not reloading properly crash dropping pad part onto schematic view schematic logo text now appearing in printout unblocked schematic logo text editing ------------------------------------------------------------------- Wed Oct 10 07:40:02 UTC 2012 - bugs@vdm-design.de - update to 0.7.9b * new parts editor--phase one (thanks to Shunichi and Tatsuya for beta-testing) * SMD parts can be added either to the top or bottom of a two-sided board * updated Greek translation (thanks Alexander) * resize schematic-frame part with text entry or combo box * 'delete plus' function--for those that miss the old 'delete' which included attached wires. For wires, this deletes up to the next bendpoint. * new parts: Schematic logo items Schematic net labels * bug fixes: "show unrouted" is also available under the routing menu schematic image export: bounding area fix default breadboard now aligned to grid miscellaneous Gerber export fixes culled most red dots (zero length traces) from pcb view text entry problems with notes ------------------------------------------------------------------- Wed Aug 15 07:19:56 UTC 2012 - bugs@vdm-design.de - update to version 0.7.7b * connection changes in one view sometimes resulted in wandering or phantom traces in another view resizing a jumper item when there is no pcb caused a crash ------------------------------------------------------------------- Sat Aug 11 06:48:19 UTC 2012 - bugs@vdm-design.de - update to version 0.7.6b * deleting a part no longer automatically deletes its connected wires * faster loading time (especially if you open two or more windows) * info view indicates whether a part is obsolete * export etchable now exports both mirrored and non-mirrored at once * paste-mask layer for SMDs added to export for production * new Slovak translation (thanks Ĺubomír) * convert via to bendpoint * default breadboard now matches the one in the starter kit * revert function * new parts: new pinheaders: long pad, molex, "alternating" footprint; new pin spacings new stereo jack (thanks Max) new rj45 * bug fixes: temp parts could disappear when multiple sketches were open with the same temp part (thanks to Jerome and Joerg for help tracking this down) no longer possible to draw wires that connect back to themselves or that connect redundantly (thanks to Jerome for help tracking this down) breadboard view routing-status jpg export quality set to high progress bar for parts bin search copper blocker width- and height- text entry mirrored etchable export was broken default breadboard now matches the one shipped with the kits drc was incorrectly flagging hole parts nasty autorouter bug with split traces dragging from temp to another sketch would fail when reopening the other sketch rubber-banding bug when dragging a bendpoint with multiple wires individual ground fill crash bug one more attempt to fix the mac prefs-dialog crash missing contour in export etchable ------------------------------------------------------------------- Mon Jul 2 15:59:35 UTC 2012 - bugs@vdm-design.de - update to version 0.7.5b * drag-and-drop from desktop onto Fritzing window will open fritzing files * align-to-grid and show-grid default to 'on' * new Greek translation (thanks Alexander) * updated Czech translation (thanks Josef) * updated German translation * PCB View: Fritzing now supports multiple pcbs in a single sketch streamlined custom pcb shape file import can modify pin size for pinheaders, screwterminals, generic sips and dips, and mystery parts pcb "stickiness" is now a setting (i.e. whether parts on a pcb stay in place or follow along when a pcb is dragged) 'pad' part can now be placed on either copper0 or copper1 right-click to convert a bendpoint to a via * new parts: arduino nano 3.0 resizable ellipse pcb resizable copper fill "blocker" ardiuno mega shield pcb mini-breadboard 3-axis accelerometer breakout (thanks azharul) PCF8574 (thanks c.sgamba) S1133 Si Photodiode (thanks Nick) double-row THT pin headers micro-SD socket 4-pin audio jack new pin header spacings * bug fixes: 'open' menu item now opens all Fritzing files; no more separate 'import' menu items all grid options can be found on the view menu added support for elements in svgs more reliable panning when spacebar is down hole parts align to grid routing status fixes in pcb view simple pcb autoplacement fix locked copper fill parts are not deleted if the copper fill function is invoked again armel/linux compiler errors fixed OSX Preferences dialog crash finally fixed? export etchable no longer including board silkscreen on all layers ------------------------------------------------------------------- Thu Apr 12 11:00:49 UTC 2012 - bugs@vdm-design.de - update to new upstream version 0.7.4b * fixed the resistor bugs introduced in 0.7.3 ------------------------------------------------------------------- Tue Apr 10 10:18:06 UTC 2012 - bugs@vdm-design.de - update to new upstream version 0.7.3b ------------------------------------------------------------------- Tue Mar 13 11:18:52 UTC 2012 - bugs@vdm-design.de - update to new upstream version 0.7.1b - remove tools and datasheet directorys because of licence issues ------------------------------------------------------------------- Sat Feb 4 08:31:01 UTC 2012 - bugs@vdm-design.de - update to new upstream version 0.7.0b ------------------------------------------------------------------- Tue Jan 3 11:26:13 UTC 2012 - bugs@vdm-design.de - update to new upstream version 0.6.5b ------------------------------------------------------------------- Fri Dec 16 22:01:36 UTC 2011 - bugs@vdm-design.de - update to new upstream version 0.6.4b - remove files that were included upstream ------------------------------------------------------------------- Fri Aug 19 18:05:00 UTC 2011 - bugs@vdm-design.de - update to new upstream version 0.6.3b ------------------------------------------------------------------- Mon Aug 01 19:04:00 UTC 2011 - bugs@vdm-design.de - add translations - add runtime dependencies for libqsqlite.so and libqjpeg.so - add packages for debian, mandriva, centos, sles and rhel ------------------------------------------------------------------- Thu Jul 28 21:09:30 UTC 2011 - bugs@vdm-design.de - updated to 0.6.2b - add packages for ubuntu and fedora ------------------------------------------------------------------- Mon May 30 12:20:56 UTC 2011 - prusnak@opensuse.org - updated to 0.5.2b ------------------------------------------------------------------- Sat Feb 12 12:52:52 UTC 2011 - prusnak@opensuse.org - updated to 0.5.0b ------------------------------------------------------------------- Sat Feb 12 12:52:37 UTC 2011 - prusnak@opensuse.org - created package based on Fedora one by Ed Marshall