OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/fs-check?expand=0&rev=1

2007-01-08 17:31:42 +00:00 · 2007-01-08 17:31:42 +00:00 · eda718ed25
commit eda718ed25
8 changed files with 322 additions and 0 deletions
--- a/.gitattributes
+++ b/.gitattributes
@ -0,0 +1,23 @@
+## Default LFS
+*.7z filter=lfs diff=lfs merge=lfs -text
+*.bsp filter=lfs diff=lfs merge=lfs -text
+*.bz2 filter=lfs diff=lfs merge=lfs -text
+*.gem filter=lfs diff=lfs merge=lfs -text
+*.gz filter=lfs diff=lfs merge=lfs -text
+*.jar filter=lfs diff=lfs merge=lfs -text
+*.lz filter=lfs diff=lfs merge=lfs -text
+*.lzma filter=lfs diff=lfs merge=lfs -text
+*.obscpio filter=lfs diff=lfs merge=lfs -text
+*.oxt filter=lfs diff=lfs merge=lfs -text
+*.pdf filter=lfs diff=lfs merge=lfs -text
+*.png filter=lfs diff=lfs merge=lfs -text
+*.rpm filter=lfs diff=lfs merge=lfs -text
+*.tbz filter=lfs diff=lfs merge=lfs -text
+*.tbz2 filter=lfs diff=lfs merge=lfs -text
+*.tgz filter=lfs diff=lfs merge=lfs -text
+*.ttf filter=lfs diff=lfs merge=lfs -text
+*.txz filter=lfs diff=lfs merge=lfs -text
+*.whl filter=lfs diff=lfs merge=lfs -text
+*.xz filter=lfs diff=lfs merge=lfs -text
+*.zip filter=lfs diff=lfs merge=lfs -text
+*.zst filter=lfs diff=lfs merge=lfs -text
--- a/.gitignore
+++ b/.gitignore
@ -0,0 +1 @@
+.osc
--- a/fs-check-0.7.dif
+++ b/fs-check-0.7.dif
@ -0,0 +1,76 @@
+unchanged:
+================================================================================
+--- configure
+++ configure
+@@ -2124,13 +2124,8 @@
+ echo "$as_me:$LINENO: checking whether $DF accepts --local" >&5
+ echo $ECHO_N "checking whether $DF accepts --local... $ECHO_C" >&6
+ 
+-HAVE_DF_LOCAL=''
+-if $DF --local > /dev/null 2>&1 ; then
+-   echo "yes"
+-   HAVE_DF_LOCAL=' --local'
+-else
+-   echo "no"
+-fi
+echo "yes"
+HAVE_DF_LOCAL=' --local'
+ 
+ # Extract the first word of "find", so it can be a program name with args.
+ set dummy find; ac_word=$2
+@@ -2235,7 +2230,7 @@
+        CORE_PAT='core'  # don't know wait for someone to complain.
+         ;;
+      linux*)
+-       DF_OPTS="-t jfs -t ext2 -t ext3 -t ntfs -t reiserfs -t vfat$HAVE_DF_LOCAL"
+       DF_OPTS="-t xfs -t jfs -t ext2 -t ext3 -t ntfs -t reiserfs -t vfat$HAVE_DF_LOCAL"
+        CORE_PAT='core.[0-9]*'
+         ;;
+      netbsd*)
+@@ -2257,14 +2252,8 @@
+ echo "$as_me:$LINENO: checking whether $DF accepts --inodes" >&5
+ echo $ECHO_N "checking whether $DF accepts --inodes... $ECHO_C" >&6
+ 
+-HAVE_DF_INODES=0
+-if $DF --inodes > /dev/null 2>&1 ; then
+-   echo "yes"
+-   HAVE_DF_INODES=1
+-else
+-   echo "no"
+-fi
+-
+echo "yes"
+HAVE_DF_INODES=1
+ 
+ 
+ echo "$as_me:$LINENO: checking if $DU can handle --separate-dirs or an equivalent" >&5
+--- fs-check.in.in
+++ fs-check.in.in
+@@ -626,7 +626,7 @@
+   $program = basename($0); # Who am I today, anyway?
+ 
+   $mail_program        = '@MAILER@';
+-  $config_file         = "/var/adm/fs-check.cf";
+  $config_file         = "/etc/fs-check.cf";
+   $default_script_file = "@prefix@/bin/fs-report";
+   $sleep_interval      = 60*60;
+   $pid_file            = "@PIDDIR@$program.pid";
+--- fs-report.in
+++ fs-report.in
+@@ -243,6 +243,7 @@
+      'newest-lines=n' => \$newest_lines,
+      'ls-lines=n'     => \$ls_lines,
+      'debug=n'        => \$debug,
+     'fast!'	      => \$fast,
+      'ls!'            => \$do_ls,
+      'size!'          => \$do_size,
+      'core!'          => \$do_core,
+--- sample/crontab.add
+++ sample/crontab.add
+@@ -1,5 +1,4 @@
+-# $Id: crontab.add,v 1.2 2005/07/26 15:59:18 rockyb Exp $
+ # Change locations of files and frequencies as appropriate.
+ # File system checker....
+ #
+-5 * * * * /usr/local/bin/fs-check -1 --config /var/adm/fs_check.cnf
+5 * * * * /usr/bin/fs-check -1 --config /etc/fs-check.cf
--- a/fs-check-0.7.tar.bz2
+++ b/fs-check-0.7.tar.bz2
@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:6ce07008529173682d8bf7ef7b964c39dc1b49a3e73f3f48f339e53955850917
+size 103631
--- a/fs-check.cf
+++ b/fs-check.cf
@ -0,0 +1,88 @@
+# Configuration file for fs-check
+#   This file tells the program fs-check
+#    1. what filesystems are checked/excluded. Included filesystems
+#       are specified with OWNER and excluded filesystems are
+#       specified with EXCLUDE or EXCLUDE_PAT with optionally a DEFAULT prefix.
+#    2. at what point to start to complain. A threshold is specified with
+#       LIMIT for filesystem space or ILIMIT for inode space with optionally
+#       a DEFAULT prefix.
+#    3. who to send mail when there is trouble. A mail contact is specified
+#       with OWNER with possibly a DEFAULT prefix.
+#    4. what program to run when there is trouble. A mail contact is specified
+#       with ACTION with possibly a DEFAULT prefix.
+#    5. the shortest interval between which we send notifications. 
+#       This is specified via MIN_INTERVAL with optionally a DEFAULT prefix.
+
+# Lines with # in column 1 or blank lines are ignored. Actually, any line
+# that doesn't match a valid line is ignored.
+
+# So what *isn't* ignored? Lines that begin in column 1 with
+# EXCLUDE <mount-point>
+# EXCLUDE_PAT <mount-point-regexp>
+# OWNER  <mount-point> <email-address> <amount full>
+# OWNER <mount-point>  <email-address>
+# LIMIT <mount-point> <amount full>
+# ILIMIT <mount-point> <amount_full>
+# ACTION <mount-point> <script>
+# MIN_INTERVAL <mount-point> seconds
+# DEFAULT OWNER <email-address>
+# DEFAULT OWNER <email-address> <amount full>
+# DEFAULT LIMIT <amount full>
+# DEFAULT ACTION <script>
+# DEFAULT MIN_INTERVAL seconds
+
+# Case is not significant. 
+# <amount full> is either the percentage of the disk full or the number of
+# bytes that need to be available. The way we distinguish the first 
+# case from the second is to add a K, KB, M, MB, G, or GB at the end. 
+# An optional % can be used to specify percent for more clarity, although
+# if just a number is used it is taken as a percentage.
+
+# For example "default 90" and "DEFAULT 90%" are the same thing and
+# mean that mail should be sent out on any disk that is 90% or more
+# full unless otherwise specified by a more specific LIMIT, ILIMIT or
+# OWNER (with amount) line.
+
+# In contrast, 4096KB, 4096k, or 4MB means that 4 megabytes must be
+# available on the disk. You may want to use this form for say the
+# root partition.
+#
+# If there are many lines which refer to the same disk, or change the default
+# (which can be done in a couple ways), the last one sticks. 
+
+# This is who gets mail when something's wrong and no further specification
+default owner root 90%
+
+# This is the program to run when no other program is specified...
+default action /usr/bin/fs-report
+
+# Limit at which to complain about i-nodes...
+default ilimit 90%
+
+# Don't sent out notifications if they occur less than 30 minutes
+# (1800 seconds) from the last notification
+default min_interval 1800
+
+# The limits for the directory which holds /tmp should not be 
+# too close to the maximum limit. The file system checker stores its 
+# temporary data there. So if this is too full, we won't get a useful
+# report back.
+limit    /      70%
+#limit   /var   90%
+#limit   /usr	95%
+#limit   /src   90%
+#limit   /home	90%
+
+action  /var /usr/bin/fs-report --fast
+
+# Don't check any filesystem starting /cdrom...
+exclude_pat ^/media/
+
+# Filesystems not listed, e.g /home, would be checked as they come 
+# under the default. If you want a disk exclude them, create/uncomment 
+# an exclude line such as the one below.
+#exclude /mnt/floppy
+#exclude /mnt/msfloppy
+#exclude /mnt/cdrom
+#exclude /mnt/cdrom2
+#exclude /mnt/dvd
--- a/fs-check.changes
+++ b/fs-check.changes
@ -0,0 +1,45 @@
+-------------------------------------------------------------------
+Mon Jan  8 13:00:24 CET 2007 - mskibbe@suse.de
+
+- fs-check expects fs-check.cfg in /var/adm rather then etc
+  ( #231222 ) 
+
+-------------------------------------------------------------------
+Wed Aug 30 11:01:10 CEST 2006 - mskibbe@suse.de
+
+- update to version 0.7 which
+  o contains bugfixes 
+  o fix make distcheck
+  o update copyright
+
+-------------------------------------------------------------------
+Sat Feb 25 17:23:07 CET 2006 - kukuk@suse.de
+
+- Workaround configure checks for autobuild
+- Don't start in "norun" mode per default
+
+-------------------------------------------------------------------
+Wed Jan 25 21:46:24 CET 2006 - mls@suse.de
+
+- converted neededforbuild to BuildRequires
+
+-------------------------------------------------------------------
+Wed Sep  7 15:41:37 CEST 2005 - kukuk@suse.de
+
+- Update to version 0.6
+
+-------------------------------------------------------------------
+Thu Jul 21 14:51:08 CEST 2005 - kukuk@suse.de
+
+- Update to version 0.5
+
+-------------------------------------------------------------------
+Tue Nov  2 12:10:27 CET 2004 - kukuk@suse.de
+
+- Update to version 0.4
+
+-------------------------------------------------------------------
+Mon Jun 28 18:52:00 CEST 2004 - kukuk@suse.de
+
+- Initial version
+
--- a/fs-check.spec
+++ b/fs-check.spec
@ -0,0 +1,86 @@
+#
+# spec file for package fs-check (Version 0.7)
+#
+# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# This file and all modifications and additions to the pristine
+# package are under the same license as the package itself.
+#
+# Please submit bugfixes or comments via http://bugs.opensuse.org/
+#
+
+# norootforbuild
+
+Name:           fs-check
+BuildRequires:  mailx
+URL:            http://fs-check.sourceforge.net
+License:        GNU General Public License (GPL)
+Group:          System/Monitoring
+Autoreqprov:    on
+Requires:       mailx
+BuildRoot:      %{_tmppath}/%{name}-%{version}-build
+Version:        0.7
+Release:        26
+Summary:        Check File System Usage
+BuildArchitectures: noarch
+Source:         %{name}-%{version}.tar.bz2
+Source1:        %{name}.cf
+Patch:          %{name}-%{version}.dif
+
+%description
+fs-check checks file system sizes to see if they are getting too full.
+It uses a configuration file that specifies the file systems to check,
+e-mail contacts, trigger thresholds (percentage or amount used and
+unused), and a report program to run. It includes fs-report, which
+shows things like the largest files, the newest files, and core files.
+It can be run from cron or as a daemon.
+
+
+
+%prep
+%setup -q
+%patch
+
+%build
+./configure --prefix=%{_prefix} --mandir=%{_mandir}
+make
+make check
+mkdir -p $RPM_BUILD_ROOT/etc
+cp %SOURCE1 $RPM_BUILD_ROOT/etc
+
+%install
+make install DESTDIR=$RPM_BUILD_ROOT
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc AUTHORS ChangeLog COPYING NEWS README THANKS sample/crontab.add
+%config(noreplace) /etc/fs-check.cf
+%{_mandir}/man8/fs-check.8.gz
+%{_mandir}/man8/fs-report.8.gz
+%{_bindir}/fs-check
+%{_bindir}/fs-report
+
+%changelog -n fs-check
+* Mon Jan 08 2007 - mskibbe@suse.de
+- fs-check expects fs-check.cfg in /var/adm rather then etc
+  ( #231222 )
+* Wed Aug 30 2006 - mskibbe@suse.de
+- update to version 0.7 which
+  o contains bugfixes
+  o fix make distcheck
+  o update copyright
+* Sat Feb 25 2006 - kukuk@suse.de
+- Workaround configure checks for autobuild
+- Don't start in "norun" mode per default
+* Wed Jan 25 2006 - mls@suse.de
+- converted neededforbuild to BuildRequires
+* Wed Sep 07 2005 - kukuk@suse.de
+- Update to version 0.6
+* Thu Jul 21 2005 - kukuk@suse.de
+- Update to version 0.5
+* Tue Nov 02 2004 - kukuk@suse.de
+- Update to version 0.4
+* Mon Jun 28 2004 - kukuk@suse.de
+- Initial version
--- a/0
+++ b/0