b0a79c8bdb
Ghostscript version upgrade to 9.15rc1 release candidate for the 9.15 version (primarily a maintenance release) so that openSUSE users can try it out (as of this writing there are no recorded incompatible changes). OBS-URL: https://build.opensuse.org/request/show/248339 OBS-URL: https://build.opensuse.org/package/show/Printing/ghostscript?expand=0&rev=40
481 lines
21 KiB
RPMSpec
481 lines
21 KiB
RPMSpec
#
|
|
# spec file for package ghostscript
|
|
#
|
|
# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany.
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via http://bugs.opensuse.org/
|
|
#
|
|
|
|
|
|
Name: ghostscript
|
|
BuildRequires: cups-devel
|
|
# dbus-1-devel is needed for "configure --enable-dbus" (see below):
|
|
BuildRequires: dbus-1-devel
|
|
BuildRequires: freetype2-devel
|
|
BuildRequires: libexpat-devel
|
|
BuildRequires: libpng-devel
|
|
BuildRequires: libtiff-devel
|
|
BuildRequires: libtool
|
|
BuildRequires: pkg-config
|
|
BuildRequires: xorg-x11-devel
|
|
BuildRequires: xorg-x11-fonts
|
|
BuildRequires: zlib-devel
|
|
Summary: The Ghostscript interpreter for PostScript and PDF
|
|
License: AGPL-3.0
|
|
Group: System/Libraries
|
|
Url: http://www.ghostscript.com/
|
|
# Special version needed for Ghostscript release candidates (e.g. "Version: 9.14pre15rc1" for 9.15rc1).
|
|
# Version 9.15rc1 would be newer than 9.15 (run "zypper vcmp 9.15rc1 9.15") because the rpmvercmp algorithm
|
|
# would treat 9.15rc1 as 9.15.rc.1 (alphabetic and numeric sections get separated into different elements)
|
|
# and 9.15.rc.1 is newer than 9.15 (it has one more element in the list while previous elements are equal)
|
|
# so that we use an alphabetic prefix 'pre' to make it older than 9.15 (numbers are considered newer than letters).
|
|
# But only with the alphabetic prefix "9.pre15rc1" would be older than the previous version number "9.14"
|
|
# because rpmvercmp would treat 9.pre15rc1 as 9.pre.15.rc1 and letters are older than numbers
|
|
# so that we keep additionally the previous version number to upgrade from the previous version:
|
|
Version: 9.14pre15rc1
|
|
Release: 0
|
|
# Normal version for Ghostscript releases is the upstream version:
|
|
#Version: 9.14
|
|
# tarball_version is used below to specify the directory via "setup -n":
|
|
# Special tarball_version needed for Ghostscript release candidates e.g. "define tarball_version 9.15rc1".
|
|
# For Ghostscript releases tarball_version and version are the same (i.e. the upstream version):
|
|
#define tarball_version %{version}
|
|
%define tarball_version 9.15rc1
|
|
# built_version is used below in the install and files sections:
|
|
# Separated built_version needed in case of Ghostscript release candidates e.g. "define built_version 9.15".
|
|
# For Ghostscript releases built_version and version are the same (i.e. the upstream version):
|
|
#define built_version %{version}
|
|
%define built_version 9.15
|
|
# Source0...Source9 is for sources from upstream:
|
|
# Special URLs for Ghostscript release candidates:
|
|
# URL for Source0: http://www.ghostscript.com/~chrisl/ghostscript-9.15rc1.tar.gz
|
|
# URL for MD5 checksums: http://www.ghostscript.com/~chrisl/MD5SUMS or http://www.ghostscript.com/~chrisl/MD5SUM
|
|
# MD5 checksum for Source0: 619e5a1fdfd3f1098f1a37f7f9772b5c
|
|
Source0: http://www.ghostscript.com/~chrisl/ghostscript-9.15rc1.tar.gz
|
|
# Normal URLs for Ghostscript releases:
|
|
# URL for Source0: http://downloads.ghostscript.com/public/ghostscript-9.14.tar.gz
|
|
# URL for MD5 checksums: http://downloads.ghostscript.com/public/MD5SUMS
|
|
# MD5 checksum for Source0: 586494befb443363338c1b6379f13973
|
|
#Source0: http://downloads.ghostscript.com/public/ghostscript-%{version}.tar.gz
|
|
# Patch0...Patch9 is for patches from upstream:
|
|
#
|
|
# Source10...Source99 is for sources from SUSE which are intended for upstream:
|
|
#
|
|
# Patch10...Patch99 is for patches from SUSE which are intended for upstream:
|
|
#
|
|
# Source100...Source999 is for sources from SUSE which are not intended for upstream:
|
|
#
|
|
# Patch100...Patch999 is for patches from SUSE which are not intended for upstream:
|
|
#
|
|
# RPM dependencies:
|
|
# Additional RPM Provides of the ghostscript-library packages in openSUSE 11.4 from
|
|
# "rpm -q --provides ghostscript-library" and "rpm -q --provides ghostscript-x11":
|
|
# ghostscript
|
|
# gs
|
|
# gs_lib
|
|
# pstoraster
|
|
# ghostscript_any
|
|
# ghostscript-serv
|
|
# gs_x11
|
|
# ghostscript_x11
|
|
# ghostscript-mini
|
|
# Which of those are actually used in openSUSE:Factory (dated 22 Feb. 2012):
|
|
# ghostscript
|
|
# gs
|
|
# gs_lib
|
|
# ghostscript_any
|
|
# ghostscript_x11
|
|
# ghostscript-mini
|
|
# Which other packages need those in openSUSE:Factory (dated 22 Feb. 2012):
|
|
# blocxx-doc BuildRequires ghostscript
|
|
# iproute2 BuildRequires ghostscript
|
|
# gle-graphics Requires ghostscript
|
|
# webdot Requires ghostscript
|
|
# ddd BuildRequires ghostscript_any
|
|
# emacs-auctex BuildRequires ghostscript_any
|
|
# kernel-docs BuildRequires ghostscript_any
|
|
# texlive-bin BuildRequires ghostscript_any
|
|
# cups Requires ghostscript_any
|
|
# html2ps Requires ghostscript_any
|
|
# latex2html Requires ghostscript_any
|
|
# pstoedit Requires ghostscript_any
|
|
# ghostview Requires ghostscript_x11
|
|
# gv Requires ghostscript_x11
|
|
# texlive-bin Requires ghostscript_x11
|
|
# klatexformula BuildRequires gs and Requires gs
|
|
# capi4hylafax Requires gs_lib
|
|
# hylafax Requires gs_lib
|
|
# graphviz-plugins BuildRequires ghostscript-mini
|
|
# Provide the additional RPM Provides of the ghostscript-library package
|
|
# (ghostscript_x11 is provided by the ghostscript-x11 sub-package, see below):
|
|
Provides: ghostscript_any
|
|
Provides: gs
|
|
Provides: gs_lib
|
|
# There is a needless requirement for pstoraster in gutenprint up to openSUSE 11.4.
|
|
# Satisfy it to be backward compatible with installed gutenprint packages:
|
|
Provides: pstoraster
|
|
# Replace any version of the packages ghostscript-library and ghostscript-mini silently.
|
|
# The "Obsoletes: ghostscript-mini" is intentionally unversioned because
|
|
# this package ghostscript should replace any version of ghostscript-mini.
|
|
# There is intentionally no "Provides: ghostscript-mini" here because this
|
|
# would cause a conflict when this package ghostscript should be re-replaced
|
|
# by ghostscript-library because ghostscript-library conflicts with ghostscript-mini
|
|
# so that there would be no easy way back from ghostscript to ghostscript-library.
|
|
# Different versions must be explicitly specified in Provides and Obsoletes
|
|
# to avoid a RPMLINT warning that the package obsoletes itself
|
|
# because an unversioned RPM dependency means "all versions".
|
|
# The RPM documentation http://www.rpm.org/max-rpm/s1-rpm-depend-manual-dependencies.html
|
|
# and /usr/share/doc/packages/rpm/manual/dependencies (in rpm-4.8.0 in openSUSE 11.4)
|
|
# does not show a comparison operator for "not equal" so that two obsoletes are used:
|
|
Provides: ghostscript-library = %{version}
|
|
Obsoletes: ghostscript-library < %{version}
|
|
Obsoletes: ghostscript-library > %{version}
|
|
Obsoletes: ghostscript-mini
|
|
# The ghostscript-x11 sub-package requires the exact matching version-release
|
|
# of the ghostscript main-package (see below) so that the ghostscript main-package
|
|
# should conflict with a non-matching ghostscript-x11 package to make sure
|
|
# that the ghostscript main-package is not changed without changing
|
|
# the ghostscript-x11 sub-package accordingly.
|
|
# The RPM documentation http://www.rpm.org/max-rpm/s1-rpm-depend-manual-dependencies.html
|
|
# and /usr/share/doc/packages/rpm/manual/dependencies (in rpm-4.8.0 in openSUSE 11.4)
|
|
# does not show a comparison operator for "not equal" so that two conflicts are used:
|
|
Conflicts: ghostscript-x11 < %{version}-%{release}
|
|
Conflicts: ghostscript-x11 > %{version}-%{release}
|
|
# When the ghostscript main-package is installed, usually the exact matching
|
|
# version-release of the ghostscript-x11 sub-package should be also installed:
|
|
Recommends: ghostscript-x11 = %{version}-%{release}
|
|
# When the ghostscript main-package is installed, usually the CUPS filters gstoraster and gstopxl
|
|
# should be also installed. Since version 9.10 those CUPS filters are removed from Ghostscript
|
|
# and are now provided by the binary RPM sub-package cups-filters-ghostscript
|
|
# (see the cups-filters-ghostscript sub-package description).
|
|
# No RPM requirement because Ghostscript can be used without those CUPS filters
|
|
# and cups-filters-ghostscript is only available for newer openSUSE versions
|
|
# (currently since openSUSE 12.2) but in particular not for SLE11:
|
|
%if 0%{?suse_version} > 1210
|
|
Recommends: cups-filters-ghostscript
|
|
%endif
|
|
# Require Ghostscript's fonts because the Ghostscript package provides the
|
|
# "Fontmap" file /usr/share/ghostscript/<version>/Resource/Init/Fontmap.GS
|
|
# which lists Ghostscript's fonts but the fonts itself are provided in the
|
|
# separated packages ghostscript-fonts-std and ghostscript-fonts-other
|
|
# (regarding separated packages see /usr/share/ghostscript/<version>/doc/Fonts.htm)
|
|
# so that a RPM requirement is needed to make sure that Ghostscript has its fonts:
|
|
Requires: ghostscript-fonts-other
|
|
Requires: ghostscript-fonts-std
|
|
# Prerequire /sbin/ldconfig which is used in the traditional bash scriptlets for post/postun:
|
|
PreReq: /sbin/ldconfig
|
|
# Install into this non-root directory (required when norootforbuild is used):
|
|
BuildRoot: %{_tmppath}/%{name}-%{version}-build
|
|
|
|
%description
|
|
Ghostscript is a package of software that provides:
|
|
|
|
An interpreter for the PostScript language,
|
|
with the ability to convert PostScript language files
|
|
to many raster formats, view them on displays,
|
|
and print them on printers that don't have
|
|
PostScript language capability built in.
|
|
|
|
An interpreter for Portable Document Format (PDF) files,
|
|
with the same abilities.
|
|
|
|
The ability to convert PostScript language files
|
|
to PDF (with some limitations) and vice versa.
|
|
|
|
A set of C procedures (the Ghostscript library)
|
|
that implement the graphics and filtering
|
|
(data compression / decompression / conversion)
|
|
capabilities that appear as primitive operations
|
|
in the PostScript language and in PDF.
|
|
|
|
For information how to use Ghostscript see
|
|
/usr/share/ghostscript/%{version}/doc/Use.htm
|
|
|
|
%package x11
|
|
Summary: X11 library for Ghostscript
|
|
Group: Productivity/Publishing/PS
|
|
# Require the exact matching version-release of the ghostscript main-package because
|
|
# a non-matching ghostscript main-package may let it fail or even crash (e.g. segfault)
|
|
# because all Ghostscript software is built from one same Ghostscript source tar ball
|
|
# so that there could be any kind of Ghostscript-internal dependencies.
|
|
# The exact matching version-release of the ghostscript main-package is available
|
|
# on the same package repository where the ghostscript-x11 sub-package is because
|
|
# all are built simulaneously from the same Ghostscript source package:
|
|
Requires: ghostscript = %{version}-%{release}
|
|
# Unfortunately ghostscript-library.spec and ghostscript-mini.spec have
|
|
# an unversioned "Provides: ghostscript" and for RPM this means that both
|
|
# ghostscript-library and ghostscript-mini provide any version of "ghostscript"
|
|
# so that any version of ghostscript-library and ghostscript-mini fulfills
|
|
# the above versioned requirement which is wrong and therefore an explicit conflicts
|
|
# is used here to avoid the mess.
|
|
# Above the ghostscript main package "Provides: ghostscript-library = version" so that
|
|
# versioned conflicts are needed to avoid a conflict with the ghostscript main package.
|
|
# The RPM documentation http://www.rpm.org/max-rpm/s1-rpm-depend-manual-dependencies.html
|
|
# and /usr/share/doc/packages/rpm/manual/dependencies (in rpm-4.8.0 in openSUSE 11.4)
|
|
# does not show a comparison operator for "not equal" so that two conflicts are used:
|
|
Conflicts: ghostscript-library < %{version}
|
|
Conflicts: ghostscript-library > %{version}
|
|
Conflicts: ghostscript-mini
|
|
# In openSUSE:Factory (dated 22 Feb. 2012) ghostview gv and texlive-bin require ghostscript_x11 (see above):
|
|
Provides: ghostscript_x11
|
|
|
|
%description x11
|
|
This package contains the X11 library which is needed
|
|
to view PostScript and PDF files with Ghostscript
|
|
under the X Window System.
|
|
|
|
%package devel
|
|
Summary: Development files for Ghostscript
|
|
Group: Development/Libraries/C and C++
|
|
Requires: ghostscript = %{version}
|
|
# Unfortunately ghostscript-library.spec and ghostscript-mini.spec have
|
|
# an unversioned "Provides: ghostscript" and for RPM this means that both
|
|
# ghostscript-library and ghostscript-mini provide any version of "ghostscript"
|
|
# so that any version of ghostscript-library and ghostscript-mini fulfills
|
|
# the above versioned requirement which is wrong and therefore an explicit conflicts
|
|
# is used here to avoid the mess.
|
|
# Above the ghostscript main package "Provides: ghostscript-library = version" so that
|
|
# versioned conflicts are needed to avoid a conflict with the ghostscript main package.
|
|
# The RPM documentation http://www.rpm.org/max-rpm/s1-rpm-depend-manual-dependencies.html
|
|
# and /usr/share/doc/packages/rpm/manual/dependencies (in rpm-4.8.0 in openSUSE 11.4)
|
|
# does not show a comparison operator for "not equal" so that two conflicts are used:
|
|
Conflicts: ghostscript-library < %{version}
|
|
Conflicts: ghostscript-library > %{version}
|
|
Conflicts: ghostscript-mini
|
|
Conflicts: ghostscript-mini-devel
|
|
|
|
%description devel
|
|
This package contains the development files for Ghostscript.
|
|
|
|
%prep
|
|
# Be quiet when unpacking and
|
|
# use a directory name matching Source0 to make it work also for ghostscript-mini:
|
|
%setup -q -n ghostscript-%{tarball_version}
|
|
|
|
%build
|
|
# Set our preferred architecture-specific flags for the compiler and linker:
|
|
export CFLAGS="$RPM_OPT_FLAGS"
|
|
export CXXFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing"
|
|
autoreconf -fi
|
|
# --docdir=%%{_defaultdocdir}/%%{name} does not work therefore it is not used.
|
|
# --enable-cups and --with-pdftoraster and --with-install-cups
|
|
# (--with-install-cups is new since version 9.04)
|
|
# to make and install cups/filter/gstoraster and cups/filter/gstopxl
|
|
# and related files (gstoraster.convs pxlcolor.ppd pxlmono.ppd).
|
|
# --enable-dbus to have colord support in gstoraster, see cups/colord.c (colord is accessed via D-Bus).
|
|
# --with-ijs to enable IJS printer driver support (in particular needed by HPIJS).
|
|
# --with-drivers=ALL to all file format drivers and all printer drivers.
|
|
# --with-x to use the X Window System.
|
|
# --without-omni to disable the outdated and unmaintained omni driver.
|
|
# --without-jasper and --enable-openjpeg because since Ghostscript 9.05 JasPer is deprecated
|
|
# and Ghostscript now ships modified OpenJPEG sources for JPEG2000 decoding
|
|
# (replacing JasPer - although JasPer is still included for this release).
|
|
# Performance, reliability and memory use whilst decoding JPX streams are all improved.
|
|
# --without-ufst and --without-luratech because those are relevant to commercial releases only
|
|
# which would require a commercial license.
|
|
# --without-libpaper disables libpaper support because SUSE does not have libpaper.
|
|
%define gs_font_path /usr/share/fonts/truetype:/usr/share/fonts/Type1:/usr/share/fonts/CID:/usr/share/fonts/URW
|
|
# See http://bugs.ghostscript.com/show_bug.cgi?id=693100
|
|
export SUSE_ASNEEDED=0
|
|
./configure --prefix=%{_prefix} \
|
|
--bindir=%{_bindir} \
|
|
--libdir=%{_libdir} \
|
|
--datadir=%{_datadir} \
|
|
--mandir=%{_mandir} \
|
|
--infodir=%{_infodir} \
|
|
--with-fontpath=%{gs_font_path} \
|
|
--with-libiconv=maybe \
|
|
--enable-freetype \
|
|
--with-jbig2dec \
|
|
--without-jasper \
|
|
--enable-openjpeg \
|
|
--enable-dynamic \
|
|
--with-ijs \
|
|
--enable-cups \
|
|
--enable-dbus \
|
|
--with-pdftoraster \
|
|
--with-install-cups \
|
|
--with-drivers=ALL \
|
|
--with-x \
|
|
--disable-gtk \
|
|
--disable-compile-inits \
|
|
--without-omni \
|
|
--without-ufst \
|
|
--without-luratech \
|
|
--without-libpaper
|
|
make
|
|
# Make libgs.so and two programs which use it, gsx and gsc:
|
|
make so
|
|
# Configure and make libijs (that is not done regardless whether or not --with-ijs is used above):
|
|
pushd ijs
|
|
./autogen.sh
|
|
./configure --prefix=%{_prefix} \
|
|
--bindir=%{_bindir} \
|
|
--libdir=%{_libdir} \
|
|
--datadir=%{_datadir} \
|
|
--mandir=%{_mandir} \
|
|
--infodir=%{_infodir} \
|
|
--enable-shared \
|
|
--disable-static
|
|
make
|
|
popd
|
|
|
|
%install
|
|
make install DESTDIR=%{buildroot}
|
|
# Install libgs.so gsx gsc and some header files:
|
|
make soinstall DESTDIR=%{buildroot}
|
|
# Install libijs and its header files:
|
|
pushd ijs
|
|
make install DESTDIR=%{buildroot}
|
|
popd
|
|
# Remove installed ijs example client and server and its .la file:
|
|
rm %{buildroot}%{_bindir}/ijs_client_example
|
|
rm %{buildroot}%{_bindir}/ijs_server_example
|
|
rm %{buildroot}%{_libdir}/libijs.la
|
|
# Install documentation which is not installed by default
|
|
# see http://bugs.ghostscript.com/show_bug.cgi?id=693002
|
|
# and fail intentionally as notification if something changed:
|
|
DOCDIR=%{buildroot}%{_datadir}/ghostscript/%{built_version}/doc
|
|
for D in LICENSE
|
|
do test -e $DOCDIR/$( basename $D ) && exit 99
|
|
install -m 644 $D $DOCDIR
|
|
done
|
|
# Add a link from SUSE's usual documentation directory to Ghostscript's documentation directory
|
|
# because "configure --docdir=%%{_defaultdocdir}/%%{name}" does not work (see above):
|
|
install -d -m 755 %{buildroot}%{_defaultdocdir}
|
|
pushd %{buildroot}%{_defaultdocdir}
|
|
ln -s ../../ghostscript/%{built_version}/doc ghostscript
|
|
popd
|
|
# Extract the catalog of devices which are actually built-in in exactly this Ghostscript:
|
|
# Do not pollute the build log file with zillions of meaningless messages:
|
|
set +x
|
|
cat /dev/null >catalog.devices
|
|
for D in $( %{buildroot}/usr/bin/gs -h | sed -n -e '/^Available devices:/,/^Search path:/p' | egrep -v '^Available devices:|^Search path:' )
|
|
do for F in base/devs.mak base/contrib.mak contrib/contrib.mak
|
|
do sed -n -e '/ Catalog /,/ End of catalog /p' $F | grep "[[:space:]]$D[[:space:]]" | grep -o '[[:alnum:]].*' | tr -s '[:blank:]' ' ' | sed -e 's/ /\t/' | expand -t16 >>catalog.devices
|
|
done
|
|
done
|
|
# Switch back to the usual build log messages:
|
|
set -x
|
|
install -m 644 catalog.devices $DOCDIR
|
|
|
|
# Use traditional bash scriptlet with an explicite "exit 0" line at the end to be fail safe
|
|
# see http://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets
|
|
%post
|
|
/sbin/ldconfig
|
|
exit 0
|
|
|
|
# Use traditional bash scriptlet with an explicite "exit 0" line at the end to be fail safe
|
|
# see http://en.opensuse.org/openSUSE:Packaging_scriptlet_snippets
|
|
%postun
|
|
/sbin/ldconfig
|
|
exit 0
|
|
|
|
%files
|
|
%defattr(-, root, root)
|
|
%{_bindir}/dvipdf
|
|
%{_bindir}/eps2eps
|
|
%{_bindir}/font2c
|
|
%{_bindir}/gs
|
|
%{_bindir}/gsx
|
|
%{_bindir}/gsc
|
|
%{_bindir}/gsbj
|
|
%{_bindir}/gsdj
|
|
%{_bindir}/gsdj500
|
|
%{_bindir}/gslj
|
|
%{_bindir}/gslp
|
|
%{_bindir}/gsnd
|
|
%{_bindir}/lprsetup.sh
|
|
%{_bindir}/pdf2dsc
|
|
%{_bindir}/pdf2ps
|
|
%{_bindir}/pf2afm
|
|
%{_bindir}/pfbtopfa
|
|
%{_bindir}/pphs
|
|
%{_bindir}/printafm
|
|
%{_bindir}/ps2ascii
|
|
%{_bindir}/ps2epsi
|
|
%{_bindir}/ps2pdf
|
|
%{_bindir}/ps2pdf12
|
|
%{_bindir}/ps2pdf13
|
|
%{_bindir}/ps2pdf14
|
|
%{_bindir}/ps2pdfwr
|
|
%{_bindir}/ps2ps
|
|
%{_bindir}/ps2ps2
|
|
%{_bindir}/unix-lpr.sh
|
|
%{_bindir}/wftopfa
|
|
%doc %{_mandir}/man1/dvipdf.1.gz
|
|
%doc %{_mandir}/man1/eps2eps.1.gz
|
|
%doc %{_mandir}/man1/font2c.1.gz
|
|
%doc %{_mandir}/man1/gs.1.gz
|
|
%doc %{_mandir}/man1/gsbj.1.gz
|
|
%doc %{_mandir}/man1/gsdj.1.gz
|
|
%doc %{_mandir}/man1/gsdj500.1.gz
|
|
%doc %{_mandir}/man1/gslj.1.gz
|
|
%doc %{_mandir}/man1/gslp.1.gz
|
|
%doc %{_mandir}/man1/gsnd.1.gz
|
|
%doc %{_mandir}/man1/pdf2dsc.1.gz
|
|
%doc %{_mandir}/man1/pdf2ps.1.gz
|
|
%doc %{_mandir}/man1/pf2afm.1.gz
|
|
%doc %{_mandir}/man1/pfbtopfa.1.gz
|
|
%doc %{_mandir}/man1/printafm.1.gz
|
|
%doc %{_mandir}/man1/ps2ascii.1.gz
|
|
%doc %{_mandir}/man1/ps2epsi.1.gz
|
|
%doc %{_mandir}/man1/ps2pdf.1.gz
|
|
%doc %{_mandir}/man1/ps2pdf12.1.gz
|
|
%doc %{_mandir}/man1/ps2pdf13.1.gz
|
|
%doc %{_mandir}/man1/ps2pdf14.1.gz
|
|
%doc %{_mandir}/man1/ps2pdfwr.1.gz
|
|
%doc %{_mandir}/man1/ps2ps.1.gz
|
|
%doc %{_mandir}/man1/wftopfa.1.gz
|
|
%doc %{_mandir}/man1/ijs-config.1.gz
|
|
%doc %{_mandir}/de/man1/dvipdf.1.gz
|
|
%doc %{_mandir}/de/man1/eps2eps.1.gz
|
|
%doc %{_mandir}/de/man1/font2c.1.gz
|
|
%doc %{_mandir}/de/man1/gsnd.1.gz
|
|
%doc %{_mandir}/de/man1/pdf2dsc.1.gz
|
|
%doc %{_mandir}/de/man1/pdf2ps.1.gz
|
|
%doc %{_mandir}/de/man1/printafm.1.gz
|
|
%doc %{_mandir}/de/man1/ps2ascii.1.gz
|
|
%doc %{_mandir}/de/man1/ps2pdf.1.gz
|
|
%doc %{_mandir}/de/man1/ps2pdf12.1.gz
|
|
%doc %{_mandir}/de/man1/ps2pdf13.1.gz
|
|
%doc %{_mandir}/de/man1/ps2pdf14.1.gz
|
|
%doc %{_mandir}/de/man1/ps2ps.1.gz
|
|
%doc %{_mandir}/de/man1/wftopfa.1.gz
|
|
%doc %{_defaultdocdir}/ghostscript
|
|
%dir %{_datadir}/ghostscript
|
|
%dir %{_datadir}/ghostscript/%{built_version}
|
|
%doc %{_datadir}/ghostscript/%{built_version}/doc/
|
|
%{_datadir}/ghostscript/%{built_version}/examples/
|
|
%{_datadir}/ghostscript/%{built_version}/iccprofiles/
|
|
%{_datadir}/ghostscript/%{built_version}/lib/
|
|
%{_datadir}/ghostscript/%{built_version}/Resource/
|
|
%{_libdir}/libgs.so.*
|
|
%{_libdir}/ghostscript/
|
|
%{_libdir}/libijs-0.35.so
|
|
%exclude %{_libdir}/ghostscript/%{built_version}/X11.so
|
|
|
|
%files x11
|
|
%defattr(-,root,root)
|
|
%{_libdir}/ghostscript/%{built_version}/X11.so
|
|
|
|
%files devel
|
|
%defattr(-,root,root)
|
|
%{_includedir}/ghostscript/
|
|
%{_libdir}/libgs.so
|
|
%{_bindir}/ijs-config
|
|
%{_includedir}/ijs/
|
|
%{_libdir}/libijs.so
|
|
%{_libdir}/pkgconfig/ijs.pc
|
|
|
|
%changelog
|