- Update to version 3.25
* Have ubxtool "-w 0" run forever.
* Bump libgps version to 30.0
* Change fixsource_t, store server locally, make pointers const.
* Move gpsd_hexpack() to gps.h as gps_hexpack()
* Move gpsd_hexdump() to gps.h as gps_hexdump()
* Allow gpsctl -s/--ship to work without -f.
* Grab prRes and quality from u-blox 8+, into JSON, then into xgps.
* New GPSD-MIB, installed in share/mibs/gpsd.
* gpssnmp supports GPSD-MIB in pass and pass_persist modes
* Add decodes for NMEA $xxHDM, $xxROT and $xxXDR
* Add Magnetic Heading (mheading) and Rate of Rotation (rot) to
attitude_t
* Allow NTP time from gpsd://, tcp:// and udp:// sources
* Add the -B, --nobuffer, option to gpspipe.
* gpsd opens $RUNDIR/chrony.clk.XXX.sock to supply serial time to
chronyd.
* Add -g and --garmin options to gpxlogger for depth.
* Add -F and --filein options to gpxlogger to read GPSD JSON from a
file.
- Update gpsd.keyring (DD3DD9BB -> 0C898D47)
OBS-URL: https://build.opensuse.org/request/show/1057854
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=153
- Update to version 3.24
* NTRIP 2.0 now works. But still only plain HTML, not RTP, etc.
* Remove ntrip option and NTRIP_ENABLE. Always build.
* Remove passthrough option and PASSTHROUGH_ENABLE. Always build.
* Remove nmea0183 option and NMEA0183_ENABLE. Always build.
* Remove netfeed option and NETFEED_ENABLE. Always build.
* gpsd will retry ntrip:// and tcp:// connections
* cgps can expand to show more sats. Added --rtk option.
* maidenhead() checks for input errors.
* Better SHM logs.
* PPS and TOFF JSON now include shm used, and real precision.
* Add initial, untested, TSIPv1 support
* split debug messages into different syslog() levels.
* New ppscheck options, and can use /dev/ppsX devices.
* First try at TSIPv1 protocol decodes.
* Decode Quectel $PQVERNO for firmware version
* Decode Skytrak PX1172RH_DS messages.
- Update gpsd.keyring (0C898D47 -> DD3DD9BB)
OBS-URL: https://build.opensuse.org/request/show/973575
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=151
- Set ProtectClock to false or gpsd will not start
- Don't use gpsd version in patches (will break with every update)
% harden_gpsd.service.patch
% harden_gpsdctl@.service.patch
- Update to version 3.23.1
* Improve ubx cycle detection.
* Add quirks for Jackson Labs nonstandard NMEA
* Change STATUS_NO_FIX to STATUS_UNK to avoid confusion with fix
mode.
* Change STATUS_FIX to STATUS_GPS to avoid confusion with fix
mode.
* Change STATUS_DGPS_FIX to STATUS_DGPS to avoid confusion with
fix mode.
* Split SOURCE_ACM from SOURCE_USB. ACM has no speeds.
* Add speeds 1 mbps, 1.152 mbps, 1.5 mbps, and higher. When libc
supports them.
* Improve autobaud.
* Add new u-blox M10 messages.
* Fix u-blox M6, M7 initialization issues.
* Various ubxtool and gpxlogger updates.
* Add mtk3301_speed_switcher()
* No API, ABI changes.
* Fallback to "python3" if "python" not found.
- Added hardening to systemd service(s) (bsc#1181400). Added patch(es):
* harden_gpsd.service.patch
* harden_gpsdctl@.service.patch
- Update to version 3.23
* doc/*xml all moved into www/internals.adoc
* Convert all DocBook (.xml) to AsciiDoctor (.adoc)
* Remove all XSL remnants.
* gpsplot: speedup, add new options.
* driver_ubx.c: Add decode for UBX-NAV-STATUS
* gps/ubx.py: Improve decode for UBX-NAV-STATUS
* cgps: Add popup help, interactive options.
* Reorganize and split the man pages.
* Small updates for u-blox M8 and M10
* Deprecated mtk3331 and ashtech build options. Use nmea0183
instead.
* gpssnmp: Move from contrib/ to clients, add manpage
* Add www/gpsd-client-example-code.adoc
* Add gpsdebuginfo script and man page.
* ubxtool: Add BeiDou, Galileo, GLONASS, QZSS, and partial SBAS
subframe decodes
* Max serial port speed raised to 921,600.
* SUBFRAME JSON now includes new fields to support multiple
constellations.
* gpsd: Add some ADR and UDR message partial decodes.
* ubxtool: Add some ADR and UDR message polls and decodes.
* Remove COMPASS_ENABLE. Always compile attitude code.
* contrib/webgps.py: use argparse, arguments -V, --version,
--no-html-head.
* Add readonly flag to DEVICE JSON.
* Control messages to gpsd now return JSON, instead of, sometimes,
OK or ERROR.
* gpsfake uses "# Date: yyyy-mm-dd" to set initial time.
* Don't compute wrong GPS rollover after 2021-10-23.
* Bump libgps to version 29.
- disable lto on aarch64 for now (bsc#1187089)
- Update to version 3.22
* Added client/gpscsv to convert gpsd JSON to csv.
* Added client/gpsplot to dynamically plot gpsd JSON.
* Added client/gpssubframe to decode gpsd SUBFRAME JSON.
* Added nSat and uSat to SKY JSON. Old clients can not read new
SKY.
* Move stuff from source root into clients/, include/, gpsmon/
and libgps/.
* Move stuff from source root into gpsd/.
* Move class ubx out of ubxtool and into gps/ubx.py.
* Build all targets in gpsd-$VERSION/, not in tree.
* NMEA 4.11 support for $GI (IRNSS) and $GZ (QZSS).
- Remove obsolete sed scripts that no longer serve a purpose
- Use new ldconfig macros in Tumbleweed
- Update to version 3.21
* Create python programs from .in files to allow macro substitution.
* Finally clean .sconsign*.dblite with "scons -c"
* Remove revision.h. Move REVISION into gpsd_config.h
* Change asciidoc to asciidoctor, and revise documents to match.
* library version bumped to 27
* Add leap_seconds to gps_data_t
* Add/change many rtcm2 structs in gps.h
* Add/change many rtcm3 structs in gps.h
* Maindenhead now 8 chars.
* Add icondir and sharedir install options
* Install basic doc in sharedir
* Move gps_data_t->status to gps_fix_t.status for better fix merging
* The gps python module is now Pure Python + FFI. FFI only for packet.py
* User should manually delete any old packet*so.
* Add wspeedt, wspeedr, wanglem, wanglet, wangler to gps_fix_t
* Add "-p CONFIG", "-p STATUS", "-t" and "-tt" options to ubxtool.
* Add python_shebang option to scons config.
* gpsrinex has long options and many new options.
* Added long options to gpsd.
* Remove unused FORCE_GLOBAL_ENABLE
* Remove config option reconfigure, replace with -p, --passive runtime option.
* Remove config option controlsend (RECONFIGURE_ENABLE)
* Add config option rundir=XX. Default set to /run, or /var/run as required.
* Fixes for Python 2.6 up to 3.9.
- Update to version 3.20
* Change README into an asciidoc file and publish HTML from it
* Add NED and geoid_sep to gps_fix_t and TPV JSON.
* Add "-e NED" to ubxtool to enable NED messages.
* gpsdata.separation replaced by gpsdata.fix.geoid_sep.
* Remove nofloats build option.
* TPV JSON "alt" is now fixed at WGS84. Probably.
* xgps now uses XGPSOPTS environment variable.
* add health variable to satellite_t
* change satellite_t elevation and azimuth to double
* satellite_t elevation, azimuth, and ss use NAN for unknown value.
* add altMSL, altHAE, and depth, to gps_fix_t
* altitude in gps_fix_t is deprecated and undefined
* wgs84_separation() now return EGM2008 computed from 5x5 degree base data.
* The best results are close to cm, the worst off up to 12m.
* Move mag_var from gps_device_t to magnetic_var gps_data_t.
* Added mag_var() to interpolate magnetic variation (deviation) from a table.
* Remove true2magnetic() as mag_var() improves on it.
* Remove TIMEHINT_ENABLE. It only worked when enabled.
* Remove NTP_ENABLE and NTPSHM_ENABLE. It only worked when enabled.
* Remove PPS_ENABLE and TIMING_ENABLE.
* Add dgps_age and dgps_station to gps_fix_t
* Convert all timestamp_t to timespec_t.
* Remove FIXED_PORT_SPEED and FIXED_STOP_BITS build options.
* Add -s [speed] and -f [framing] runtime options to gpsd.
* A working CC and termios.h are mandatory.
* use the current leap second to determine the current GPS epoch.
* leapfetch.py, leapseconds.cache, timebase.h and leapfetch option gone.
- Remove 0001-Make-sure-Qgpsmm.pc-is-usable.patch (upstreamed)
- Fix legacy socket path
- Allow building without python2 available
- Add 0001-Make-sure-Qgpsmm.pc-is-usable.patch to fix the bogus values
in qgpsmm.pc
- Update the URLs
- Update to version 3.19
* Rearrange rawdata_t. Bump the API because gps_data_t changed.
* Report sequence-ID fields in type 7 and 13 AIS messages.
* Preliminary support for SiRFstar V
* Improve error modeling.
* Update pseudo NMEA to v3.0, with fractional time.
* Improve cycle detection, mostly for NMEA.
* Move epe from gps_data_t to be near its friends in gps_fix_t.
* Preliminary u-blox 9 support.
* Add qErr in gps_data_t to store PPS quantization error.
* Add Android (AOSP) support
* Improved multi gnss and multi signal support.
* NMEA 4.10 multi gnss multi signal support.
* The arguments to "ubxtool -p P" have been expanded and changed.
* New options, -g, -x, -z, added to ubxtool for u-blox 9 support.
- Drop gpsd-declaration-in-for-loop.patch
- Correct flag to disable stripping (nostrip=True)
- Add gpsd-declaration-in-for-loop.patch to remove c99 construction
(backport from upstream), fixes building for Leap-42.3
- Upstream changed location of gpsd in systemd gpsd.service file
(change it back to {_sbindir})
- Update to version 3.18.1
* Fix some installation issues.
* A few minor updates to ubxtool and driver_ubx.
* Add contrib/skyview2svg
- Update to version 3.18.0
* Add ECEF support to ievermore, italk,Skytraq, SiRF, U-blox drivers.
* Add ECEF support to JSON, cgps and xgps.
* Add GREIS (Javad) driver from Virgin Orbit.
* Add CLI tools zerk and ubxtool to manage JAVAD and u-blox GPS.
* Add gnssid:svid to satellite_t, cgps and xgps. PRN will die.
* Add gnssid:svid to JSON, cgps and xgps.
* Add stricter version checking (more to todo).
* More and better regression tests.
* Better Python dependency checking, at build time and runtime.
* Fix several buffer issues.
* New polar plots, and improved statistice, in gpsprof.
* gpsd master/slave mode works, first time ever.
* All isnan() changed to !isfinite(), fixing many bugs.
* Client-side Python libraries may automatically reconnect
* Too many other bug fixes and improvements to mention.
* Over 1,000 commits from 46 different commiters.
- Update to version 3.17.0
* Repair support for non-NMEA devices requring active probing
(e.g. Garmin USB GPSes).
* Fix a SiRF driver bug that occasionally confused NTP.
* Support for Spectratime iSync GRClok and LNRClok oscillators.
* gpxlogger can reconnect when the GPS loses the fix.
* xgps and xgpsspeed moved to python-gi, getting shut of the
deprecated pygtk2 bindings.
* Default mode for xgpsspeed is now the more interesting nautical
display.
* gpsmon includes the hostname with the device display.
gpsprof now has centimeter precision.
- Remove patch:
* gpsd-python3.patch (not longer needed)
- Update gpsd.keyring (old key 8C6C738D got superseeded by 0C898D47 )
- Fix requires for gpsd-clients
- Cleanup spec file a bit
- Require python3 versions for packages importing python modules, all
scripts use python3 as interpreter.
- build with Qt5
- refreshed gpsd-python3.patch
- removed gpsd-fix-shebang.patch
- reworked gpsd-python3.patch
- build python3 subpackage
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
- Update to version 3.17:
* Repair support for non-NMEA devices requring active probing
(e.g. Garmin USB GPSes).
* Fix a SiRF driver bug that occasionally confused NTP.
* Support for Spectratime iSync GRClok and LNRClok oscillators.
* gpxlogger can reconnect when the GPS loses the fix.
* xgps and xgpsspeed moved to python-gi,
getting shut of the deprecated pygtk2 bindings.
* Default mode for xgpsspeed is now the more interesting nautical
display.
* gpsmon includes the hostname with the device display.
* gpsprof now has centimeter precision.
- Add gpsd-python3.patch to fix building with python3
- Fix shebangs of python script (currently still python2)
- Refresh gpsd-fix-shebang.patch
- Rename python subpackage to python2
- Remove conditionals for 1210 and older (oldest codebase built is SLE12)
- run scons in multiple threads
- convert to pkgconfig dependencies
- Cleanup build/spec file:
* Use .desktop files and PNG icon from tarball
* correct flag to disable stripping (nostrip=True)
- Update gpsd.keyring (old key 8421F11C got superseeded by 8C6C738D)
- Added "-std=gnu++98" to the compile-flags otherwise compilation will break
on systems with >= gcc6
- ifdef "Requires: pps-tools-devel" since it's only available on recent
os-versions
- Update to version 3.16
* Test rebuilds for mid-2015 leapsecond bump.
* Regression tests will run even if "python" in Python 3.
* Build correctly on systems where -ltinfo is split from -lncurses.
* Avoid some rare overflow conditions in PPS code.
* Fix bugs in JSON sat-view parsing due to the JSON parser stuffing
ints into shorts.
* Various small fixes to AIS interpretation.
* Prevent a memory leak in long-running gpsmon instances.
* Fix Savannah bug #45270: serial driver does not work properly on pipes.
* Fix Savannah bug #44648: GPSD won't build if CCFLAGS contains options
that are only compatible with the cros1s-compiler.
* Fix Savannah bug #45342: SConstruct generates wrong *.pc files.
* Fix Savannah bug #46495: gpsd_poll may crash due to unitialized pointer
(probably due to buggy FD_ISSET on host system).
* Fix Savannah bug #46648: gpsd crashes and buffer overflow is reported
when terminated.
* Fix Savannah bug #46802: AIVDM to CSV is broken in some weird cases.
* Fix Savannah bug #46804: JSON satellite view parsing is somewhat broken.
- use pkgconfig(udev) to always allow using udev-mini
- add pps-tools-devel as BuildRequires to enable kernel PPS
- use pkg-config to figure out udevdir. Fixes bootstrapping with
udev-mini
- Added missing requirements %{libgps} and %{libQgps} for devel package
- Update to version 3.15
* Fix a rare crash bug related to devices becomin inaccessible
while timed out.
* Accept NMEA 4.1 GSV sententences with the trailing signal-ID field.
* Fixed incorrect decode of south latitudes in AIS Type 17 messages.
* splint has been retired; this removes almost 2KLOC of annotations.
* chrpath is no longer a build dependency. Corrected Beidou/QZNSS display
in the Python clients so the graphics don't look like SBAS.
- Changes from version 3.14
* Skyview support for the Beidou and QZSS constellations in the
NMEA0183 driver.
* ntpmon rename to ntpshmmon - it doesn't actually monitor NTP itself.
* New HOWTO on the website: "Introduction to Time Service".
- Remove gpsd-3.13-ntpshm.patch; fixed on upstream release
- Cleanup spec file with spec-cleaner
- Add gpg signature
- Add gpsd-3.13-ntpshm.patch
- Install unit files
- Update to 3.13
* compiler.h inclusion removed for gps.h so it's standalone
for /usr/include.
* TOFF JSON report gives the offset between GPS top of second and
clock time.
* A new ntpmon tool supports capturing clock samples from NTP
SHM segments.
- Changes for 3.12
* The daemon's power utilization has been reduced by changing
from non-blocking to blocking I/O; this may be significant
on mobile devices.
* Better protection against false matches of Inland AIS messages;
thisrequired a libgps version bump to 22 (as a side effect,
per-devicefootprint has decreased).
* PPS feature is no longer markedexperimental/unstable.
* Sentence tag fields have been dropped from the JSON reports.
* GNSS and GLONASS SKY reports are now merged.
* Addressed versions of AIS Type 25 and 26 are now handled.
* The 'nmea' build option is now 'nmea0183'.
* New 'minimal' option sets all boolean options not explicitly
set on the build command line to false.
* The 'limited_max_devices' option is now 'max_devices'; the
'limited_max_clients' option is now 'max_clients'
* The previously deprecated 'libQgpsmm' option has been
removed; use 'qt'.
* A bug fix for error modeling when NMEA 0183 reports empty DOP fields.
* On OS X, the "osx-pl203" driver has been explicitly listed
as unsupported.
* The last remnants of the old pre-JSON query protocol have
been removed from the client library.
- Update to version 3.11
* A bug that prevented track interpolation has been fixed.
* We now get vertical error position and speed estimates from the
u-blox driver rather than having to interpolate them.
* Some unusual AIS talker IDs (NMEA 4.0 station classes) are supported.
* chrpath is no longer a dependency for building and testing, and
now defaults to 'no'.
* Full systemd support.
* Fixes for handling large PPS offsets.
* Improved recovery from device flakeouts, gpsmon argument parsing.
- Disable chrpath
- Added python-gpsd requires for gpsd-clients
- Respect CFLAGS and CXXFLAGS.
- Use fvisibility-inlines-hidden to build C++ code, note
that the build system is buggy and uses CFLAGS and CXXFLAGS
for the same purpose.
- Remove xorg libs buildrequires, they are never directly used.
- update to version 3.10
AIS: Adds gps2udp, an AIS data relay, split24 option supports
passing through Type 24 halves; support for Inland AIS; "scaled" no
longer controls dumping of controlled-vocabulary fields; instead,
the're always dumped numerically and as text, with text in an
attribute name generated by appending "_text" to the name of the
base attribute. The packetizer's handling of write boundaries not
coinciding with packet boundaries is improved. Better support for
mode and speed switching in the UBX driver. PPS message now ships
nsec. PPS events are visible in gpsmon. Time-reporting fix to TSIP.
- Fixed typo in udev rule (bnc#848936)
- Update to version 3.9
+ Note to packagers: this is an urgent release that fixes a possible
DoS or security hole! Armor the AIS driver against an implausible
overrun attack. A (different) fix for our first malformed-packet
crash since about 2007. Minor improvements to the NMEA2000
driver. New FAQ entry on how to know WAAS/EGNOS is working.
+ New -u and -uu options enable usec timestamps on gpspipe output.
For more please read usr/share/doc/packages/gpsd/NEWS
- Clean specfile and remove AUTHORS section
1
- Fix build and adapt udev rule to new udev location.
- update to gpsd version 3.5
- add automake as buildrequire to avoid implicit dependency
- fixed typos in gpsd.spec
- move libgpsd.so.0 from the shlib subpackage to the main package,
as it fileconflicts with other versions of it. the library is
internal only anyway.
- gpsd-devel depends on python-gpsd too.
- Update to version 2.96:
+ Bumped maximum channel count to 32 to accommodate GPS+GLONASS devices.
+ API version bumped to 5, redesign finished (changes are documented
in the Client HOWTO).
+ cgps now handles resize signals.
+ Code can now link with uClibc for embedded use.
+ Various bugs in the C++ binding have been fixed.
+ gpxlogger can now daemonize and write to a specified log file.
+ A gpsd client can now set any locale it likes, and JSON
will still be parsed using the C locale matching the daemon's.
+ Clients are no longer required to define a gpsd_report() hook.
+ gpsd no longer emits probe strings to unidentified USB devices at startup.
+ JSON timestamps in TPV and SKY are now ISO8601 rather than seconds since
the Unix epoch; the library handles the older style backward-compatibly.
+ GPGST sentences are now parsed for noise statistics when a device emits
them.
+ AIS and RTCM2 JSON dumps have device fields.
+ JSON reports now include 50bps subframe data if the device allows access to
it.
+ gpsdecode can now dump NMEA GPS binary, and subframe data to JSON.
+ The RTCM2 code now understands and analyzes RTCM2.3 messages 13,
14, and 31, and has been checked against another analyzer.
+ The ancient Sager dump format for RTCM2 is abolished in favor of a JSON
profile.
- Move udev rules from /etc/udev/rules.d to /lib/udev/rules.d
- Update to version 2.95:
+ Rationalize clearing and generation of DOPs
+ cgps now displays epx/epy rather than eph
+ Speed is now always reported if our last two fixes were good
+ Reading packets from UDP datagrams by specifying a listening
address and port is now supported
+ AIS code now interprets message type 6 and 8 application IDs
correctly as a Designated Area Code and Functional ID pair
+ gpspipe has a new -T option for setting the timestamp format
+ xgpsspeed is completely rewritten in Python
+ Qt bindings for the client library
+ gpsdcode now uses | as a field separator in -c mode, as string
fields can contain commas
+ Corrected error for reporting of AIS rate-of-turn fields
- Changes of version 2.94:
+ Error-checking in the 50bps subframe code has been greatly
improved
+ The Garmin GPS driver can now use libusb for device discovery
+ The libgps library has been split apart; the service functions
used by the daemon now live in libgpsd
+ Stronger checking for valid ephemeris before extracting the
leap-second offset
- Changes of version 2.93:
+ Support for JSON dumping and parsing of AIS message types 25 and 26
+ Removing non-streaming mode from the Python exerciser
+ Unsetting the appropriate in-use flag in the device array
+ Change the libgps default from old protocol to JSON
+ Add a close() method to the C++ binding
+ Try to recover better from sporadic cases of false matches to
Trimble packet format from a SiRF binary datastream
+ gps_poll() now returns -1 with errno not set when the gpsd
socket closes
+ TPV now refrains from reporting fields the fix quality won't support
+ gpsmon option for listing device types is now -L to -l can be used
to enable logging
+ Documentation updates
+ New POLL command brings back polling-mode operation
+ gpsd no longer eats CPU when a device is unexpectedly uplugged
+ Support for the TNT revolution is back (run mode only)
+ There is now a gpsdfake diagnostic tool that fakes being gpsd shipping
arbitrary specified data to clients.
- Update to version 2.92:
+ Fix a packaging error: the python library module was omitted
from the 2.91 tarball.
+ Improve the json import test.
- Changes from version 2.91:
+ We have support for NMEA GLONASS sentences, and a regression
test.
+ Clients now get a DEVICE notification on every driver switch.
+ It is possible to specify a TCP/IP AIS feed such as AISHub as a
data source.
+ Serious bitrot in the NTRIP support has been fixed - it was
probably nonfunctional for several releases before this.
+ Fixed buggy display of satellite-used flags in cgps.
+ xgps is replaced by a rewrite in Python that uses pygtk,
eliminating a dependency on Motif; also, it now displays AIS
information.
+ Uniform treatment of display-unit defaulting and -u in xgps,
cgps, and lcdgps.
+ Support for AIS message types 25 and 26.
+ Support for IPv6.
+ A numeric instability in the earth_distance() function
affecting track error modeling has been fixed.
+ Old protocol has been removed from the daemon; the library
still speaks it.
- Drop openmotif, openmotif-devel BuildRequires.
- Add xorg-x11-devel, xorg-x11-libXpm-devel BuildRequires.
- Add gpsd-fix-python-install.patch to fix installation of the
python bindings.
- Add python-gtk Requires to gpsd-clients subpackage as xgps now
depends on it.
- Use a valid group for the devel subpackage.
- Do not manually strip executables: this will be done by the build
service.
- Add missing dependency to python-curses for devel package (bnc#574584)
- Add another Cyprus GPS USB id (bnc#574584)
- fix udev warnings "SYSFS is deprecated"
- Fix libgps subpackage requirements
- Upgrade to gpsd-2.90, from the upstream change log:
- GPSD-NG, the new JSON-based command protocol, is now deployed
- Detection of end of a fix-reporting cycle is now reliable
- Abandone gpsflash subproject
- Increase major version of shared library due to significant API change
- Add new driver for Motorola Oncore receivers
- gpsfake can now accept multiple logfiles, interleaving test sentences
from each.
- gpsd now accepts error estimates from the NMEA $GPGBS sentence.
- Fix potential core dump in C client handling of "K" responses
- Introduce major and minor API version symbols into the public interfaces
- The sirfmon utility is gone, replaced by gpsmon
- Fix an old error in NMEA parsing
- cgpxlogger has been merged into gpxlogger.
- Speed-setting commands now allow parity and stop-bit setting
- tcmdecode becomes gpsdecode and can now de-armor and dump AIDVM packets
- The clientlibrary now works correctly in locales where the decimal
separator is not a period.
- Typo in sirfmon / gpsmon has been fixed silently by upstream (#bnc513037)
- Make libgps and python modules subpackages
- use new python macros
- Disable TrueNorth Technologies device support, it breaks
autodection (bnc#448002)
- Fix udev script again: must not kill running gpsd if disabled,
missing quotes in test, indention, add parameter to set additional
command line options for gpsd.
- Sleep a second before setting the default device in udev
script to give gpsd some time to set up the TCP socket
- Disable start of gpsd by udev rule by default and add sysconfig
variable to enable it if desired (bnc#432420)
- Fix RPM group tag for devel package
- Cleanup spec file
- update to 2.37
Fixes:
+ C++ bindings
+ Garmin USB support
+ multiple instances of ntp pps thread starting
+ better handling of odd PPS signals
+ eye candy in the php visualizers
- enable Garmin Simple Text support
- enable True North Technologies support
- disable static
- mark man files as %doc
- added desktop entries
- fix ldconfig calls
- clean buildroot
- PreReq coreutils and fillup_prereq for postinstall
- updated to 2.36
* Integrated Garmin Simple Text Protocol driver from Peter Slansky.
* Stabilize the Trimble regression tests.
* Remove the wired-in NTP time offset from the NMEA driver
* Integrate Ashtech driver from Chris Kuethe.
- Submit to STABLE for 11.0
- updated to 2.35
- update udev rules and script
- Spec file cleanup
- update to version 2.34:
* Fix for byte-swapping of Zodiac control messages on big-endian hardware.
* Disable iTalk by default and note that it needs to be tested.
* Command line arguments can now be DGPSIP or NTRIP URLs; -d is
deprecated.
* Added udev rules.
* Address excessive processor and memory utilization on SBCs; it's now
possible to configure compile-time limits on the number of devices and
client sessions.
* Eliminate use of fuser(1) in gpsfake.
* Get gpsd working with EarthMates again, this had been broken since 2.15.
Massive string safety audit and OpenBSD port by Chris Kuethe.
* J command added.
* The gpsctl and gpscat tools and the gpsd.phps script were added.
* Switched to lesstif from openmotif.
* Better autodetection of DLE-led packet protocols (notably TSIP and Garmin
binary) and of SiRFStar I and III devices.
* Fixed buggy parsing and generation of PGRME.
- Initial package
OBS-URL: https://build.opensuse.org/request/show/921732
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/gpsd?expand=0&rev=57
- Update to version 3.23.1
* Improve ubx cycle detection.
* Add quirks for Jackson Labs nonstandard NMEA
* Change STATUS_NO_FIX to STATUS_UNK to avoid confusion with fix
mode.
* Change STATUS_FIX to STATUS_GPS to avoid confusion with fix
mode.
* Change STATUS_DGPS_FIX to STATUS_DGPS to avoid confusion with
fix mode.
* Split SOURCE_ACM from SOURCE_USB. ACM has no speeds.
* Add speeds 1 mbps, 1.152 mbps, 1.5 mbps, and higher. When libc
supports them.
* Improve autobaud.
* Add new u-blox M10 messages.
* Fix u-blox M6, M7 initialization issues.
* Various ubxtool and gpxlogger updates.
* Add mtk3301_speed_switcher()
* No API, ABI changes.
* Fallback to "python3" if "python" not found.
OBS-URL: https://build.opensuse.org/request/show/920889
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=141
- Update to version 3.23
* doc/*xml all moved into www/internals.adoc
* Convert all DocBook (.xml) to AsciiDoctor (.adoc)
* Remove all XSL remnants.
* gpsplot: speedup, add new options.
* driver_ubx.c: Add decode for UBX-NAV-STATUS
* gps/ubx.py: Improve decode for UBX-NAV-STATUS
* cgps: Add popup help, interactive options.
* Reorganize and split the man pages.
* Small updates for u-blox M8 and M10
* Deprecated mtk3331 and ashtech build options. Use nmea0183
instead.
* gpssnmp: Move from contrib/ to clients, add manpage
* Add www/gpsd-client-example-code.adoc
* Add gpsdebuginfo script and man page.
* ubxtool: Add BeiDou, Galileo, GLONASS, QZSS, and partial SBAS
subframe decodes
* Max serial port speed raised to 921,600.
* SUBFRAME JSON now includes new fields to support multiple
constellations.
* gpsd: Add some ADR and UDR message partial decodes.
* ubxtool: Add some ADR and UDR message polls and decodes.
* Remove COMPASS_ENABLE. Always compile attitude code.
* contrib/webgps.py: use argparse, arguments -V, --version,
--no-html-head.
* Add readonly flag to DEVICE JSON.
* Control messages to gpsd now return JSON, instead of, sometimes,
OK or ERROR.
* gpsfake uses "# Date: yyyy-mm-dd" to set initial time.
* Don't compute wrong GPS rollover after 2021-10-23.
* Bump libgps to version 29.
OBS-URL: https://build.opensuse.org/request/show/910575
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=140
- Update to version 3.22
* Added client/gpscsv to convert gpsd JSON to csv.
* Added client/gpsplot to dynamically plot gpsd JSON.
* Added client/gpssubframe to decode gpsd SUBFRAME JSON.
* Added nSat and uSat to SKY JSON. Old clients can not read new
SKY.
* Move stuff from source root into clients/, include/, gpsmon/
and libgps/.
* Move stuff from source root into gpsd/.
* Move class ubx out of ubxtool and into gps/ubx.py.
* Build all targets in gpsd-$VERSION/, not in tree.
* NMEA 4.11 support for $GI (IRNSS) and $GZ (QZSS).
- Remove obsolete sed scripts that no longer serve a purpose
- Use new ldconfig macros in Tumbleweed
OBS-URL: https://build.opensuse.org/request/show/862085
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=136
- Update to version 3.21
* Create python programs from .in files to allow macro substitution.
* Finally clean .sconsign*.dblite with "scons -c"
* Remove revision.h. Move REVISION into gpsd_config.h
* Change asciidoc to asciidoctor, and revise documents to match.
* library version bumped to 27
* Add leap_seconds to gps_data_t
* Add/change many rtcm2 structs in gps.h
* Add/change many rtcm3 structs in gps.h
* Maindenhead now 8 chars.
* Add icondir and sharedir install options
* Install basic doc in sharedir
* Move gps_data_t->status to gps_fix_t.status for better fix merging
* The gps python module is now Pure Python + FFI. FFI only for packet.py
* User should manually delete any old packet*so.
* Add wspeedt, wspeedr, wanglem, wanglet, wangler to gps_fix_t
* Add "-p CONFIG", "-p STATUS", "-t" and "-tt" options to ubxtool.
* Add python_shebang option to scons config.
* gpsrinex has long options and many new options.
* Added long options to gpsd.
* Remove unused FORCE_GLOBAL_ENABLE
* Remove config option reconfigure, replace with -p, --passive runtime option.
* Remove config option controlsend (RECONFIGURE_ENABLE)
* Add config option rundir=XX. Default set to /run, or /var/run as required.
* Fixes for Python 2.6 up to 3.9.
OBS-URL: https://build.opensuse.org/request/show/843584
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=134
- Update to version 3.20
* Change README into an asciidoc file and publish HTML from it
* Add NED and geoid_sep to gps_fix_t and TPV JSON.
* Add "-e NED" to ubxtool to enable NED messages.
* gpsdata.separation replaced by gpsdata.fix.geoid_sep.
* Remove nofloats build option.
* TPV JSON "alt" is now fixed at WGS84. Probably.
* xgps now uses XGPSOPTS environment variable.
* add health variable to satellite_t
* change satellite_t elevation and azimuth to double
* satellite_t elevation, azimuth, and ss use NAN for unknown value.
* add altMSL, altHAE, and depth, to gps_fix_t
* altitude in gps_fix_t is deprecated and undefined
* wgs84_separation() now return EGM2008 computed from 5x5 degree base data.
* The best results are close to cm, the worst off up to 12m.
* Move mag_var from gps_device_t to magnetic_var gps_data_t.
* Added mag_var() to interpolate magnetic variation (deviation) from a table.
* Remove true2magnetic() as mag_var() improves on it.
* Remove TIMEHINT_ENABLE. It only worked when enabled.
* Remove NTP_ENABLE and NTPSHM_ENABLE. It only worked when enabled.
* Remove PPS_ENABLE and TIMING_ENABLE.
* Add dgps_age and dgps_station to gps_fix_t
* Convert all timestamp_t to timespec_t.
* Remove FIXED_PORT_SPEED and FIXED_STOP_BITS build options.
* Add -s [speed] and -f [framing] runtime options to gpsd.
* A working CC and termios.h are mandatory.
* use the current leap second to determine the current GPS epoch.
* leapfetch.py, leapseconds.cache, timebase.h and leapfetch option gone.
- Remove 0001-Make-sure-Qgpsmm.pc-is-usable.patch (upstreamed)
- Fix legacy socket path
OBS-URL: https://build.opensuse.org/request/show/794991
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=132
- Update to version 3.19
* Rearrange rawdata_t. Bump the API because gps_data_t changed.
* Report sequence-ID fields in type 7 and 13 AIS messages.
* Preliminary support for SiRFstar V
* Improve error modeling.
* Update pseudo NMEA to v3.0, with fractional time.
* Improve cycle detection, mostly for NMEA.
* Move epe from gps_data_t to be near its friends in gps_fix_t.
* Preliminary u-blox 9 support.
* Add qErr in gps_data_t to store PPS quantization error.
* Add Android (AOSP) support
* Improved multi gnss and multi signal support.
* NMEA 4.10 multi gnss multi signal support.
* The arguments to "ubxtool -p P" have been expanded and changed.
* New options, -g, -x, -z, added to ubxtool for u-blox 9 support.
- Drop gpsd-declaration-in-for-loop.patch
OBS-URL: https://build.opensuse.org/request/show/731583
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=126
- Correct flag to disable stripping (nostrip=True)
- Add gpsd-declaration-in-for-loop.patch to remove c99 construction
(backport from upstream), fixes building for Leap-42.3
- Upstream changed location of gpsd in systemd gpsd.service file
(change it back to {_sbindir})
- Update to version 3.18.1
* Fix some installation issues.
* A few minor updates to ubxtool and driver_ubx.
* Add contrib/skyview2svg
- Update to version 3.18.0
* Add ECEF support to ievermore, italk,Skytraq, SiRF, U-blox drivers.
* Add ECEF support to JSON, cgps and xgps.
* Add GREIS (Javad) driver from Virgin Orbit.
* Add CLI tools zerk and ubxtool to manage JAVAD and u-blox GPS.
* Add gnssid:svid to satellite_t, cgps and xgps. PRN will die.
* Add gnssid:svid to JSON, cgps and xgps.
* Add stricter version checking (more to todo).
* More and better regression tests.
* Better Python dependency checking, at build time and runtime.
* Fix several buffer issues.
* New polar plots, and improved statistice, in gpsprof.
* gpsd master/slave mode works, first time ever.
* All isnan() changed to !isfinite(), fixing many bugs.
* Client-side Python libraries may automatically reconnect
* Too many other bug fixes and improvements to mention.
* Over 1,000 commits from 46 different commiters.
- Update to version 3.17.0
* Repair support for non-NMEA devices requring active probing
(e.g. Garmin USB GPSes).
* Fix a SiRF driver bug that occasionally confused NTP.
* Support for Spectratime iSync GRClok and LNRClok oscillators.
* gpxlogger can reconnect when the GPS loses the fix.
* xgps and xgpsspeed moved to python-gi, getting shut of the
deprecated pygtk2 bindings.
* Default mode for xgpsspeed is now the more interesting nautical
display.
* gpsmon includes the hostname with the device display.
gpsprof now has centimeter precision.
- Remove patch:
* gpsd-python3.patch (not longer needed)
- Update gpsd.keyring (old key 8C6C738D got superseeded by 0C898D47 )
OBS-URL: https://build.opensuse.org/request/show/657406
OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/gpsd?expand=0&rev=48
- Update to version 3.18.1
* Fix some installation issues.
* A few minor updates to ubxtool and driver_ubx.
* Add contrib/skyview2svg
- Update to version 3.18.0
* Add ECEF support to ievermore, italk,Skytraq, SiRF, U-blox drivers.
* Add ECEF support to JSON, cgps and xgps.
* Add GREIS (Javad) driver from Virgin Orbit.
* Add CLI tools zerk and ubxtool to manage JAVAD and u-blox GPS.
* Add gnssid:svid to satellite_t, cgps and xgps. PRN will die.
* Add gnssid:svid to JSON, cgps and xgps.
* Add stricter version checking (more to todo).
* More and better regression tests.
* Better Python dependency checking, at build time and runtime.
* Fix several buffer issues.
* New polar plots, and improved statistice, in gpsprof.
* gpsd master/slave mode works, first time ever.
* All isnan() changed to !isfinite(), fixing many bugs.
* Client-side Python libraries may automatically reconnect
* Too many other bug fixes and improvements to mention.
* Over 1,000 commits from 46 different commiters.
- Update to version 3.17.0
* Repair support for non-NMEA devices requring active probing
(e.g. Garmin USB GPSes).
* Fix a SiRF driver bug that occasionally confused NTP.
* Support for Spectratime iSync GRClok and LNRClok oscillators.
* gpxlogger can reconnect when the GPS loses the fix.
* xgps and xgpsspeed moved to python-gi, getting shut of the
deprecated pygtk2 bindings.
* Default mode for xgpsspeed is now the more interesting nautical
OBS-URL: https://build.opensuse.org/request/show/651645
OBS-URL: https://build.opensuse.org/package/show/Application:Geo/gpsd?expand=0&rev=122
