Accepting request 1078165 from home:wkazubski:test:science

- Update to version 4.5.5 (2023-04-05)
  * Add park to rotorez.c
  * Fix rig power on/off from rigctl cmd line and rigctld
  * Enable async mode by default to prevent WSJT-X crash on IC9700
    with transceive on
  * Fix IC7610 get_powerstat to disable it -- cannot read power status
  * Fix K3 K22 command error for remote operations
  * Fix Gemini DX1200 gemini_set_level
  * Fix async I/O to not call flush
  * Change EX startup commands for Yaesu rigs to allow 
    errors...Win4Yaesu not recognizing EX commands
  * Fix jst145 set_freq and get_freq
  * Restore tcflush as some odd behavior was seen that tclush fixes
  * Fix XG3 operations
  * Separate the validation cmd in newcat.c to allow rig
    post_write_delay to be in effect
  * Increase post_write to 20ms for FT710
  * Add attenuator level control for TS890
  * Update SMeter/SWR tables for TS890
  * Add fix for TMD700
  * Improve FT-857 get_vfo response when error occurs
  * Allow FT-857 to use cached vfo on get_vfo when error
    occurs reading EEPROM
  * Fix FTDX10 FT710 set_level AF
  * Fix FT-450D detection
  * Fix VFO A/B swapping for gpredict -- hopefully better
    behavior for VFO swapping rigs. Should avoid setting RX freq
    while TX and avoid TX freq while RX
  * Fix QRP QDX PTT to new TQ command due to firmware changes
  * Remove EX103 check for FTDX5000
  * Fix K3/K3S VFOB setting of mode/width
  * Fix AGC level display in rigctld
  * Change FTDX10 to no serial handshake
  * Add TS2000 to has_ps exception
  * Add FT991 to 60M exception
  * Fix get_powerstat bad call in rigctl_parse.c
  * Really fix CM108 ptt_bitnum usage
  * Fix Elecraft power2mW precision/accuracy
  * Fix power on/off/on for Icom rigs with rigctld power_on=0

OBS-URL: https://build.opensuse.org/request/show/1078165
OBS-URL: https://build.opensuse.org/package/show/hardware:sdr/hamlib?expand=0&rev=39

Hamlib-4.5.4.tar.gz

@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:b5c06a1a55aa510a67e05c1d48c0d6b5e326af7af0a0b0052d3a76ef682bea8b
-size 2124013

Hamlib-4.5.5.tar.gz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:e0314e24304c26d262ef751411fc27a93705721f3a1d5461635d7f7ccaee96e9
+size 2129028

hamlib.changes

@@ -1,3 +1,46 @@
+-------------------------------------------------------------------
+Sun Apr  9 08:07:38 UTC 2023 - Wojciech Kazubski <wk@ire.pw.edu.pl>
+
+- Update to version 4.5.5 (2023-04-05)
+  * Add park to rotorez.c
+  * Fix rig power on/off from rigctl cmd line and rigctld
+  * Enable async mode by default to prevent WSJT-X crash on IC9700
+    with transceive on
+  * Fix IC7610 get_powerstat to disable it -- cannot read power status
+  * Fix K3 K22 command error for remote operations
+  * Fix Gemini DX1200 gemini_set_level
+  * Fix async I/O to not call flush
+  * Change EX startup commands for Yaesu rigs to allow 
+    errors...Win4Yaesu not recognizing EX commands
+  * Fix jst145 set_freq and get_freq
+  * Restore tcflush as some odd behavior was seen that tclush fixes
+  * Fix XG3 operations
+  * Separate the validation cmd in newcat.c to allow rig
+    post_write_delay to be in effect
+  * Increase post_write to 20ms for FT710
+  * Add attenuator level control for TS890
+  * Update SMeter/SWR tables for TS890
+  * Add fix for TMD700
+  * Improve FT-857 get_vfo response when error occurs
+  * Allow FT-857 to use cached vfo on get_vfo when error
+    occurs reading EEPROM
+  * Fix FTDX10 FT710 set_level AF
+  * Fix FT-450D detection
+  * Fix VFO A/B swapping for gpredict -- hopefully better
+    behavior for VFO swapping rigs. Should avoid setting RX freq
+    while TX and avoid TX freq while RX
+  * Fix QRP QDX PTT to new TQ command due to firmware changes
+  * Remove EX103 check for FTDX5000
+  * Fix K3/K3S VFOB setting of mode/width
+  * Fix AGC level display in rigctld
+  * Change FTDX10 to no serial handshake
+  * Add TS2000 to has_ps exception
+  * Add FT991 to 60M exception
+  * Fix get_powerstat bad call in rigctl_parse.c
+  * Really fix CM108 ptt_bitnum usage
+  * Fix Elecraft power2mW precision/accuracy
+  * Fix power on/off/on for Icom rigs with rigctld power_on=0
+
 -------------------------------------------------------------------
 Thu Jan 12 23:04:06 UTC 2023 - Wojciech Kazubski <wk@ire.pw.edu.pl>
 

hamlib.spec

@@ -18,7 +18,7 @@
 
 %define sover   4
 Name:           hamlib
-Version:        4.5.4
+Version:        4.5.5
 Release:        0
 Summary:        Run-time library to control radio transcievers and receivers
 License:        LGPL-2.1-only