- Update to version 4.6 (2024-12-24)
* send_raw can now take hex digits as colon-separated -- e.g.
send _raw icom xfe:xfe:x94:xe0:03:xfd
* Add IC7760
* IC7300 Mode filter can now be set by # (i.e. 1,2,3)
* Fixed AF6SA WRC rotor controller
* Added Rhode&Schwarz XK852
* Added Xiegu X6200
* Added Commradio CTX-10
* Added Guoehe PMR-171
* Added csntechnoligies.net S.A.T Satellite rotor control
* Added PSTRotator control
* Added Flex SmartSDR slices A-H
* Added Motorola Micom M2/M3
* Added SDR Radio SDRConsole -- TS-2000 is now hardware flow
control so need separate entry
* Added --set-conf=filter_usb, filter_usbd, and filter_cw to
allow Icom rigs set mode to set filter number too
* Added macros for applications to obtain pointers to Hamlib
structures(issues #1445, #1420, #487). Internal conversion is
still a WIP, but use of these macros will make the final cutover
transparent to applications.
* Added Guohe Q900 entry
* Unify behavior of all rigctl split commands
* Make the set_split_* commands modify the state of the specified
split VFO -- the current or targeted VFO do not have any effect
* Make the set_split_* commands enable split automatically if not
enabled
* Make the get_split_* commands return frequency of 0 Hz, mode
NONE and filter of 0 Hz if split is not enabled
* Allow all split commands to avoid VFO swapping if supported by
the rig model
* Improve Icom backend to set/get frequency, mode and filter
without VFO swapping if supported by the rig model
* Improve Yaesu newcat backend split handling
* Expose "Targetable features" (RIG_TARGETABLE_*) in dump_caps
output to allow clients to determine which commands can be
executed without VFO swapping
* Added RIG_FUNC_SYNC for FTDX101D/MP
* Added Barrett 4100
* Added DL2MAN (tr)uSDX -- needs refinement
* Added Thetis entry -- derived from FlexRadio/Apache PowerSDR
* Added VOICE/CW memory capability to many rigs -- thanks to David
Balharrie M0DGB/G8FKH
* Add -# --skip_init option to rigctl to skip rig initialization --
useful for executing commands quickly
* rig_caps is no longer constant -- this may break some 3rd party
relying on the "const" declaration.
* IC7610 now has IPP, DPP, and TX_INHIBIT functions set/get
* Hamlib now starts a multicast server that sends out rig
information. Does not receive commands yet. See README.multicast
* rigctld has new -b/bind-all option to try all interfaces
-- restores original behavior. This was done to fix duplicate
rigctld instances on Windows
* Yaesu rigs can now use send_morse to send keyer message 1-5
or a CW message up to 50 chars (which will use memory 1)
* rig set level METER can now take SWR,COMP,ALC,IC/ID,DB,PO,
VDD,TEMP arguments to set which meter to display
* reg get level displays meter number=name now
* Added parm BANDSELECT for Yaesu rigs
'p BANDSELECT' returns current band of VFOA
'P BANDSELECT BAND160M' example selects the 160M band
'P BANDSELECT ?' shows bands available for the rig
* Added rig_cm108_get/set_bit to API and get/set_gpio to
rigctl(d) for GPIO1,2,3,4 access on CM108
* Added BG2FX FX4/C/CR/L
* Fixed IC7610 to use new 0x25 0x26 command added in latest
firmware
* Fix W command in rigctld to work properly -- can take
terminating char or # of bytes to expect
* Add rig_set_debug_filename so Python can redirect debug stream
* Fix Yaesu LBL_NR to use proper values
* Add IC-905
* Add Anytone D578UVIII -- should work on any D558 model and
perhaps others too
* Add saebrtrack rotor
https://sites.google.com/site/marklhammond/saebrtrack
* Add offset_vfoa and offset_vfob applying to rig_set_freq
* Fix K4 to put it in K40 mode when requesting ID
* Fixes for M2 Rotors
* Add rigctlsync utility to synchronize frequency from a rig
to SDR# (or others)
* Add SDR# rig for use with SDR#'s gpredict plugin -- can only
get/set freq
* Add Apex Shared Loop rotator -- unidirectional only so far
* Add client_version to rigctld so client can report it's
version for future use/compatibility/alternatives
* Add --set-conf=tuner_control_pathname=hamlib_tuner_control
(default). If file exists then it will be called with 0/1
(Off/On) argument with 'U TUNER 0' or 'U TUNER 1". Default
path is for current directory
* Add MDS 4710/9710 rigs
* Add FLIR PTU-D48, E46, D100, D300 rotors
* Fix FTDX3000 rig split
* Fix rigctld/rigctltcp information
* Fix FT817 get/set_vfo
- remove patch hamlib-add-stdlib-header.patch (applied upstream)
OBS-URL: https://build.opensuse.org/package/show/hardware:sdr/hamlib?expand=0&rev=45
This commit is contained in:
Martin Pluskal
Git OBS Bridge
commit
46366b5ad4
23
.gitattributes
vendored
Normal file
23
.gitattributes
vendored
Normal file
@ -0,0 +1,23 @@
|
||||
## Default LFS
|
||||
*.7z filter=lfs diff=lfs merge=lfs -text
|
||||
*.bsp filter=lfs diff=lfs merge=lfs -text
|
||||
*.bz2 filter=lfs diff=lfs merge=lfs -text
|
||||
*.gem filter=lfs diff=lfs merge=lfs -text
|
||||
*.gz filter=lfs diff=lfs merge=lfs -text
|
||||
*.jar filter=lfs diff=lfs merge=lfs -text
|
||||
*.lz filter=lfs diff=lfs merge=lfs -text
|
||||
*.lzma filter=lfs diff=lfs merge=lfs -text
|
||||
*.obscpio filter=lfs diff=lfs merge=lfs -text
|
||||
*.oxt filter=lfs diff=lfs merge=lfs -text
|
||||
*.pdf filter=lfs diff=lfs merge=lfs -text
|
||||
*.png filter=lfs diff=lfs merge=lfs -text
|
||||
*.rpm filter=lfs diff=lfs merge=lfs -text
|
||||
*.tbz filter=lfs diff=lfs merge=lfs -text
|
||||
*.tbz2 filter=lfs diff=lfs merge=lfs -text
|
||||
*.tgz filter=lfs diff=lfs merge=lfs -text
|
||||
*.ttf filter=lfs diff=lfs merge=lfs -text
|
||||
*.txz filter=lfs diff=lfs merge=lfs -text
|
||||
*.whl filter=lfs diff=lfs merge=lfs -text
|
||||
*.xz filter=lfs diff=lfs merge=lfs -text
|
||||
*.zip filter=lfs diff=lfs merge=lfs -text
|
||||
*.zst filter=lfs diff=lfs merge=lfs -text
|
||||
1
.gitignore
vendored
Normal file
1
.gitignore
vendored
Normal file
@ -0,0 +1 @@
|
||||
.osc
|
||||
13
hamlib-3.0-perl_install.patch
Normal file
13
hamlib-3.0-perl_install.patch
Normal file
@ -0,0 +1,13 @@
|
||||
diff --git a/bindings/Makefile.am b/bindings/Makefile.am
|
||||
index 3533b9b..4335920 100644
|
||||
--- a/bindings/Makefile.am
|
||||
+++ b/bindings/Makefile.am
|
||||
@@ -70,7 +70,7 @@ distcheck-perl: Hamlib-pl.mk
|
||||
$(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -f Hamlib-pl.mk distcheck
|
||||
|
||||
install-perl: Hamlib-pl.mk
|
||||
- $(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -f Hamlib-pl.mk install_site
|
||||
+ $(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -f Hamlib-pl.mk pure_vendor_install
|
||||
|
||||
## ExtUtils::MakeMaker says uninstall is deprecated and won't remove the files
|
||||
## anyway, so we'll have to figure out another way to remove the installed files.
|
||||
3
hamlib-4.5.5.tar.gz
Normal file
3
hamlib-4.5.5.tar.gz
Normal file
@ -0,0 +1,3 @@
|
||||
version https://git-lfs.github.com/spec/v1
|
||||
oid sha256:601c89f32ed225e9527ade3d64d0d05d23202c05ae21ffa77e59d70ee4597fcd
|
||||
size 2603846
|
||||
6
hamlib-4.5.5.tar.gz.asc
Normal file
6
hamlib-4.5.5.tar.gz.asc
Normal file
@ -0,0 +1,6 @@
|
||||
-----BEGIN PGP SIGNATURE-----
|
||||
|
||||
iF0EABECAB0WIQSC1k9rDmfNQfaJu6b7LFEw1VqIGQUCZC3oqAAKCRD7LFEw1VqI
|
||||
GfZQAJ95phZbaohL4R4IAP1P3Vbx7lmt+gCgj53cNUwJcotvCaHtwDVSjgla6p4=
|
||||
=+Ccg
|
||||
-----END PGP SIGNATURE-----
|
||||
3
hamlib-4.6.tar.gz
Normal file
3
hamlib-4.6.tar.gz
Normal file
@ -0,0 +1,3 @@
|
||||
version https://git-lfs.github.com/spec/v1
|
||||
oid sha256:6f873579bc4e0ef4e540313ec2acd4f198b5510d7dd9397a4ae68fe8ff20d167
|
||||
size 2905124
|
||||
6
hamlib-4.6.tar.gz.asc
Normal file
6
hamlib-4.6.tar.gz.asc
Normal file
@ -0,0 +1,6 @@
|
||||
-----BEGIN PGP SIGNATURE-----
|
||||
|
||||
iF0EABECAB0WIQSC1k9rDmfNQfaJu6b7LFEw1VqIGQUCZ2q+GgAKCRD7LFEw1VqI
|
||||
GdcHAJ94GjtX7o5rpLl2dwn3TrltzQ7NKACeOEaNoJmfTFNgUmGJb6JuVfHm89Q=
|
||||
=nODu
|
||||
-----END PGP SIGNATURE-----
|
||||
11
hamlib-add-stdlib-header.patch
Normal file
11
hamlib-add-stdlib-header.patch
Normal file
@ -0,0 +1,11 @@
|
||||
diff -up Hamlib-4.5.5/tests/memload.c.aaaa Hamlib-4.5.5/tests/memload.c
|
||||
--- Hamlib-4.5.5/tests/memload.c.aaaa 2024-09-27 00:26:05.524462705 +0200
|
||||
+++ Hamlib-4.5.5/tests/memload.c 2024-09-27 00:28:25.596543302 +0200
|
||||
@@ -23,6 +23,7 @@
|
||||
|
||||
#include <hamlib/rig.h>
|
||||
#include "misc.h"
|
||||
+#include <stdlib.h>
|
||||
|
||||
#ifdef HAVE_XML2
|
||||
# include <libxml/parser.h>
|
||||
797
hamlib.changes
Normal file
797
hamlib.changes
Normal file
@ -0,0 +1,797 @@
|
||||
-------------------------------------------------------------------
|
||||
Sat Dec 28 22:31:12 UTC 2024 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.6 (2024-12-24)
|
||||
* send_raw can now take hex digits as colon-separated -- e.g.
|
||||
send _raw icom xfe:xfe:x94:xe0:03:xfd
|
||||
* Add IC7760
|
||||
* IC7300 Mode filter can now be set by # (i.e. 1,2,3)
|
||||
* Fixed AF6SA WRC rotor controller
|
||||
* Added Rhode&Schwarz XK852
|
||||
* Added Xiegu X6200
|
||||
* Added Commradio CTX-10
|
||||
* Added Guoehe PMR-171
|
||||
* Added csntechnoligies.net S.A.T Satellite rotor control
|
||||
* Added PSTRotator control
|
||||
* Added Flex SmartSDR slices A-H
|
||||
* Added Motorola Micom M2/M3
|
||||
* Added SDR Radio SDRConsole -- TS-2000 is now hardware flow
|
||||
control so need separate entry
|
||||
* Added --set-conf=filter_usb, filter_usbd, and filter_cw to
|
||||
allow Icom rigs set mode to set filter number too
|
||||
* Added macros for applications to obtain pointers to Hamlib
|
||||
structures(issues #1445, #1420, #487). Internal conversion is
|
||||
still a WIP, but use of these macros will make the final cutover
|
||||
transparent to applications.
|
||||
* Added Guohe Q900 entry
|
||||
* Unify behavior of all rigctl split commands
|
||||
* Make the set_split_* commands modify the state of the specified
|
||||
split VFO -- the current or targeted VFO do not have any effect
|
||||
* Make the set_split_* commands enable split automatically if not
|
||||
enabled
|
||||
* Make the get_split_* commands return frequency of 0 Hz, mode
|
||||
NONE and filter of 0 Hz if split is not enabled
|
||||
* Allow all split commands to avoid VFO swapping if supported by
|
||||
the rig model
|
||||
* Improve Icom backend to set/get frequency, mode and filter
|
||||
without VFO swapping if supported by the rig model
|
||||
* Improve Yaesu newcat backend split handling
|
||||
* Expose "Targetable features" (RIG_TARGETABLE_*) in dump_caps
|
||||
output to allow clients to determine which commands can be
|
||||
executed without VFO swapping
|
||||
* Added RIG_FUNC_SYNC for FTDX101D/MP
|
||||
* Added Barrett 4100
|
||||
* Added DL2MAN (tr)uSDX -- needs refinement
|
||||
* Added Thetis entry -- derived from FlexRadio/Apache PowerSDR
|
||||
* Added VOICE/CW memory capability to many rigs -- thanks to David
|
||||
Balharrie M0DGB/G8FKH
|
||||
* Add -# --skip_init option to rigctl to skip rig initialization --
|
||||
useful for executing commands quickly
|
||||
* rig_caps is no longer constant -- this may break some 3rd party
|
||||
relying on the "const" declaration.
|
||||
* IC7610 now has IPP, DPP, and TX_INHIBIT functions set/get
|
||||
* Hamlib now starts a multicast server that sends out rig
|
||||
information. Does not receive commands yet. See README.multicast
|
||||
* rigctld has new -b/bind-all option to try all interfaces
|
||||
-- restores original behavior. This was done to fix duplicate
|
||||
rigctld instances on Windows
|
||||
* Yaesu rigs can now use send_morse to send keyer message 1-5
|
||||
or a CW message up to 50 chars (which will use memory 1)
|
||||
* rig set level METER can now take SWR,COMP,ALC,IC/ID,DB,PO,
|
||||
VDD,TEMP arguments to set which meter to display
|
||||
* reg get level displays meter number=name now
|
||||
* Added parm BANDSELECT for Yaesu rigs
|
||||
'p BANDSELECT' returns current band of VFOA
|
||||
'P BANDSELECT BAND160M' example selects the 160M band
|
||||
'P BANDSELECT ?' shows bands available for the rig
|
||||
* Added rig_cm108_get/set_bit to API and get/set_gpio to
|
||||
rigctl(d) for GPIO1,2,3,4 access on CM108
|
||||
* Added BG2FX FX4/C/CR/L
|
||||
* Fixed IC7610 to use new 0x25 0x26 command added in latest
|
||||
firmware
|
||||
* Fix W command in rigctld to work properly -- can take
|
||||
terminating char or # of bytes to expect
|
||||
* Add rig_set_debug_filename so Python can redirect debug stream
|
||||
* Fix Yaesu LBL_NR to use proper values
|
||||
* Add IC-905
|
||||
* Add Anytone D578UVIII -- should work on any D558 model and
|
||||
perhaps others too
|
||||
* Add saebrtrack rotor
|
||||
https://sites.google.com/site/marklhammond/saebrtrack
|
||||
* Add offset_vfoa and offset_vfob applying to rig_set_freq
|
||||
* Fix K4 to put it in K40 mode when requesting ID
|
||||
* Fixes for M2 Rotors
|
||||
* Add rigctlsync utility to synchronize frequency from a rig
|
||||
to SDR# (or others)
|
||||
* Add SDR# rig for use with SDR#'s gpredict plugin -- can only
|
||||
get/set freq
|
||||
* Add Apex Shared Loop rotator -- unidirectional only so far
|
||||
* Add client_version to rigctld so client can report it's
|
||||
version for future use/compatibility/alternatives
|
||||
* Add --set-conf=tuner_control_pathname=hamlib_tuner_control
|
||||
(default). If file exists then it will be called with 0/1
|
||||
(Off/On) argument with 'U TUNER 0' or 'U TUNER 1". Default
|
||||
path is for current directory
|
||||
* Add MDS 4710/9710 rigs
|
||||
* Add FLIR PTU-D48, E46, D100, D300 rotors
|
||||
* Fix FTDX3000 rig split
|
||||
* Fix rigctld/rigctltcp information
|
||||
* Fix FT817 get/set_vfo
|
||||
- remove patch hamlib-add-stdlib-header.patch (applied upstream)
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Sep 26 22:51:51 UTC 2024 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- add patch hamlib-add-stdlib-header.patch to fix the build for
|
||||
Tumbleweed
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon May 22 18:36:53 UTC 2023 - Andreas Stieger <Andreas.Stieger@gmx.de>
|
||||
|
||||
- switch to upstream bootstrapped tarball
|
||||
- add upstream signing key and verify source signature
|
||||
- drop obsolete texinfo macros
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Apr 9 08:07:38 UTC 2023 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.5.5 (2023-04-05)
|
||||
* Add park to rotorez.c
|
||||
* Fix rig power on/off from rigctl cmd line and rigctld
|
||||
* Enable async mode by default to prevent WSJT-X crash on IC9700
|
||||
with transceive on
|
||||
* Fix IC7610 get_powerstat to disable it -- cannot read power status
|
||||
* Fix K3 K22 command error for remote operations
|
||||
* Fix Gemini DX1200 gemini_set_level
|
||||
* Fix async I/O to not call flush
|
||||
* Change EX startup commands for Yaesu rigs to allow
|
||||
errors...Win4Yaesu not recognizing EX commands
|
||||
* Fix jst145 set_freq and get_freq
|
||||
* Restore tcflush as some odd behavior was seen that tclush fixes
|
||||
* Fix XG3 operations
|
||||
* Separate the validation cmd in newcat.c to allow rig
|
||||
post_write_delay to be in effect
|
||||
* Increase post_write to 20ms for FT710
|
||||
* Add attenuator level control for TS890
|
||||
* Update SMeter/SWR tables for TS890
|
||||
* Add fix for TMD700
|
||||
* Improve FT-857 get_vfo response when error occurs
|
||||
* Allow FT-857 to use cached vfo on get_vfo when error
|
||||
occurs reading EEPROM
|
||||
* Fix FTDX10 FT710 set_level AF
|
||||
* Fix FT-450D detection
|
||||
* Fix VFO A/B swapping for gpredict -- hopefully better
|
||||
behavior for VFO swapping rigs. Should avoid setting RX freq
|
||||
while TX and avoid TX freq while RX
|
||||
* Fix QRP QDX PTT to new TQ command due to firmware changes
|
||||
* Remove EX103 check for FTDX5000
|
||||
* Fix K3/K3S VFOB setting of mode/width
|
||||
* Fix AGC level display in rigctld
|
||||
* Change FTDX10 to no serial handshake
|
||||
* Add TS2000 to has_ps exception
|
||||
* Add FT991 to 60M exception
|
||||
* Fix get_powerstat bad call in rigctl_parse.c
|
||||
* Really fix CM108 ptt_bitnum usage
|
||||
* Fix Elecraft power2mW precision/accuracy
|
||||
* Fix power on/off/on for Icom rigs with rigctld power_on=0
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Jan 12 23:04:06 UTC 2023 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.5.4 (2023-01-10)
|
||||
* Fix CM108 ptt setting for non-default usage
|
||||
* Fix power on/off for Icom rigs with rigctld power_on=0
|
||||
* Fix get_powerstat status return for non-PS kenwood rigs
|
||||
* Fix FT-710, FTDX10, FTDX101D/MP usage on 60M
|
||||
* Fix timing on NRD-535D
|
||||
* Fix AGC levels with rigctld
|
||||
* Fix FTDX3000 EX039 error
|
||||
* Fix Elecraft power2mW operation
|
||||
* Fix rig_power2mW so it checks all ranges
|
||||
* Allow rigctld to start with autopower_on=0 to avoid startup
|
||||
timeouts when rig is powered off
|
||||
* Fix dummy device to work with grig by disallowing empty "u" call
|
||||
* Fix ID5100 and promote to stable and hopefully ID4100 too
|
||||
* Remove get_powerstat from Icom ID-5100,ID-4100,ID-31,ID-51 and
|
||||
fix get/set freq in all
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Jan 1 14:58:19 UTC 2023 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.5.3 (2022-12-31)
|
||||
* Fix serial.c for hardware flow control on Linux and MacOSy
|
||||
* Add QRPLabs QCX/QDX rig -- not quite a TS480
|
||||
* Fix QRP QRDX firmware bugs in IF message so PTT works now
|
||||
* FTDX5000 will now remember startup front/read settings and restore it
|
||||
* Fix FTDX5000 write_delay with microham
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Tue Dec 27 08:52:30 UTC 2022 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.5.2 (2022-12-23)
|
||||
* Fix PowerSDR ability to do commands while powered off
|
||||
* Fix TX-500 operations
|
||||
* Fix FTDX5000 to return to MIC input on closing
|
||||
* Fix rig.c calling rig_get_mode when backend does not have get_mode
|
||||
* Fix kenwood_ts890_get_level
|
||||
* Add Prosistel D elevation CBOX az to fix problem with azimuth
|
||||
control
|
||||
* Fix FT736R gpredict usage by adding cached get_freq
|
||||
* Fix get_powerstat problem with Log4OM/Flex and others
|
||||
* Fix -R option to not need argument
|
||||
* Fix -R option to close rig on last rigctld client disconnect
|
||||
* Add FTDX1200 to rigs that need to ensure PTT is off before
|
||||
changing frequency
|
||||
* Add --disable-parallel configure option for mingw builds on Linux
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Dec 9 22:06:30 UTC 2022 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.5.1 (2022-12-08)
|
||||
* FT2000, FTDX3000/D, FT891, FT991, FT950, FTDX5000 now set CAT TOT
|
||||
to 100ms
|
||||
* Add missing NB2 setting to FT-950, FTDX-1200, FTDX-3000, FTDX-5000,
|
||||
FTDX-9000
|
||||
* Add missing meter reading to TS-890S -- thanks to Geore Baltz N3GB
|
||||
* Fix FT736 VFOB freq and mode set
|
||||
* Added send_raw to rigctl -- see rigctl man page
|
||||
* Fix AGC Level dumpcaps on most rigs
|
||||
* Fix rig_send_raw to return bytes read, fill buffer, and also work
|
||||
with fixed length response/null terminator
|
||||
* Change all Kenwood rigs to 500ms serial timeout
|
||||
* Fix dumpcaps filter printout to only show declared filters
|
||||
* Fix triggering PTT on XGComms device on Linux
|
||||
* Fix level_gran in all rigs
|
||||
* Add RIG_FUNC_TUNER to flrig.c
|
||||
* Fix FT-991 level_gran (needs to be done for lots of rigs)
|
||||
* Fix man page rigctl to show units for LEVEL items
|
||||
* Fix Flex6xxx if_len
|
||||
* Fix FLRig set_ptt
|
||||
* Fix missing KEYSPD to TS890
|
||||
* rigctl 'W' command can now use a singled char terminator like ;
|
||||
that allows for variable length responses with no timeout --
|
||||
e.g. WFA; ;
|
||||
* New RIG_LEVEL_USB_AF to control audio gain from rig to computer
|
||||
-- to allow AGC function in software using RF and USB_AF
|
||||
* Add RIG_LEVEL_AGC_TIME to allow AGC/OFF to be set for IC-7300,
|
||||
IC-9700, IC-705
|
||||
* Add RIG_FUNC_OVF_STATUS to get overflow status for IC-7300,
|
||||
IC-9700, IC-705, and IC-R8600
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Nov 3 19:01:32 UTC 2022 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.5 (2022-10-30)
|
||||
* New rotator utility https://www.pianetaradio.it/blog/catrotator/
|
||||
* Add FT-710
|
||||
* Add Rohde&Schwartz EK89X receiver
|
||||
* Add Xeigu X5105
|
||||
* Add Gemini DX-1200 HF-1K Amplifiers
|
||||
* Kenwood rigs should now support AI command packets
|
||||
* Add FT-990UNI for older 990 ROMs 1.2 and earlier
|
||||
* Add FT-650
|
||||
* Add get_separator and set_separator and -S option for rigctld -- node-red applicability
|
||||
* Add GRBLTRK rotor project -- two axis rotor
|
||||
* enum meter_level_e is deprecated and will be removed in 4.6
|
||||
* Add SDRPlay SDRUno rig -- can now use Data/Pkt in WSJTX
|
||||
* Add ability to use cat_string to FLRig via the "w" and "W" commands
|
||||
* Add -B/--mapa2b to rigctlcom
|
||||
Allows rigctlcom to map set_freq on VFOA to VFOB instead
|
||||
This will allow CW Skimmer to work with some rigs (e.g. IC7300) using FM
|
||||
mode on VFOA and CW mode on VFOB and split mode transmit on VFOB.
|
||||
Clicking on CW Skimmer will change VFOB instead of VFOA to allow
|
||||
working dxpeditions where the fox is staying on frequency
|
||||
* Add password capability to rigctld via -A switch.
|
||||
rigctld -A will produce a consistent shared key for any
|
||||
specific password that can used in \password and rig_set_password
|
||||
TBD The shared key can also be placed in .hamlib_settings
|
||||
* Asynchronous rig data output handling to support transceive
|
||||
and spectrum data. Mikael, OH3BHX
|
||||
* See new set_conf option async for some Icom rigs
|
||||
* Multicast UDP packet output for asynchronous data. Mikael, OH3BHX
|
||||
* Rig state poll routine to serve commonly used data like frequency
|
||||
and mode from cache. Mikael, OH3BHX
|
||||
* deprecated hamlib_port_t at front of rig_state structure -- new
|
||||
one at end of structure
|
||||
* New rig_send_raw to send/read raw command to rig
|
||||
* New RIG_LEVEL_BAND_SELECT for Yaesu rigs
|
||||
* New rig_get_conf2 to replace rig_get_conf buffer overflow potential
|
||||
* New rot_get_conf2 to reaplce rot_get_conf buffer overflow potential
|
||||
* Added Barrett 4050 -- not functional yet
|
||||
* Added TCI 1.X -- not functional yet
|
||||
* Added TM-V71(A)
|
||||
* Added IC-F8101
|
||||
* Added JRC JST-145 and JST-245
|
||||
* Added Xiegu X108G, G90, and X6100
|
||||
* Added CODAN Envoy and NGS
|
||||
* Added Lab599 TX-500
|
||||
* Added GOMSPACE GS100
|
||||
* Deprecated: rigctl commands \set_trn (A) and \get_trn (a) as
|
||||
they never worked as intended
|
||||
* Deprecated: field rig_caps.transceive and RIG_TRN_* macros
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Feb 7 07:24:30 UTC 2022 - Martin Pluskal <mpluskal@suse.com>
|
||||
|
||||
- Be less strict with required interpreters for tcl and perl
|
||||
subpackages (bsc#1195260)
|
||||
- Drop python2 subpackage as its not relevant to any supported
|
||||
openSUSE release
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Wed Dec 8 17:08:24 UTC 2021 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Fixed source URL and duplicate license files
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Dec 4 21:42:49 UTC 2021 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.4
|
||||
* Icom rigs now default filter 2 when setting PKTUSB but user can
|
||||
override
|
||||
* Fix FTDX9000 meter readings
|
||||
* Add Android sensor as a rotator
|
||||
* Added rig_get_vfo to some Icom rigs that have XCHG or 0x25
|
||||
command capability
|
||||
* Added ability to build hamlib with docker
|
||||
* Added M0NKA mcHF URP rig
|
||||
* Faster serial i/o noticeable on higher baud rates
|
||||
* IC7300/9700/7800/785x set_clock/get_clock routines
|
||||
added -- no auto set yet
|
||||
* Yaesu FT1200/891/991/DX10/DX101/DX101MP set_clock/get_clock
|
||||
routines added
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Sep 19 21:52:15 UTC 2021 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Fixed source URL
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Sep 17 18:10:25 UTC 2021 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.3.1
|
||||
* Bug fix release
|
||||
- Do not do vfo_fixup on satmode rigs
|
||||
- Fix compilation of misc.c with gmtime_r replacement function
|
||||
for mingw
|
||||
- Fix python build. For some reason casting tp vfo_t in the
|
||||
RIG_VFO_N macro broke the swig parsing
|
||||
- Append the missing information to build hamlib v4.3 for
|
||||
Android NDK
|
||||
- Change set_icom_set_mode_with_data to not change mode unless
|
||||
necessary
|
||||
- Since Icom rigs default to filter 2 if a filter is not
|
||||
selected we will do the same when turning on data mode
|
||||
- Fix segfault in kenwood_set_vfo
|
||||
- scripts: Update example in readme, since 4.0 817 is 1020
|
||||
- Make testlibusb.c compatible with libusb < 1.0.23
|
||||
Note: On systems with libusb < 1.0.23 a warning will be
|
||||
emmitted but compliation should proceed without error.
|
||||
- Update testlibusb.c warning to "may be" instead of "will be"
|
||||
- Change kenwood to only set VFOA default on 1st rig_open call
|
||||
- Update to version 4.3
|
||||
* libusb-1.0.23 or greater is now required or use --without-libusb
|
||||
* Generating documentation now requires GNU source-highlighter.
|
||||
* Added IC-575
|
||||
* Less VFO swapping of newer Icom rigs -- zero swapping in WSJTX
|
||||
and JTDX
|
||||
* Dual rotator control in rotctl -R option
|
||||
* Started work on simulators -- very crude right now but usable
|
||||
to debug some things
|
||||
* Overhaul of rig split -- reverse split (VFOA=RX VFOB=TX) should
|
||||
work for rigs capable of it
|
||||
Starting VFO does not matter -- rig will end up on RX VFO
|
||||
S VFOA 1 VFOB
|
||||
S VFOB 1 VFOA
|
||||
S Main 1 Sub
|
||||
S Sub 1 Main
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Tue May 18 20:43:10 UTC 2021 - Ferdinand Thiessen <rpm@fthiessen.de>
|
||||
|
||||
- Update to version 4.2
|
||||
* New rig_get_mode_bandwidths: returns token set for bandwidths
|
||||
for given mode
|
||||
* New rig_get_info: returns token set for all vfos where order
|
||||
does not matter.
|
||||
* New rig_get_vfo_info
|
||||
* FILPATHLEN has changed to HAMLIB_FILPATHLEN
|
||||
* USRP lib and gnuradio are deprecated and will be removed in 5.0
|
||||
* Added Radan rotator
|
||||
* Added Malachite SDR
|
||||
* Major rework for PRM80
|
||||
* Add twiddle_timeout and twiddle_rit --set-conf options
|
||||
* rigctld --twiddle is deprecated and will be removed in 5.0
|
||||
along with get_twiddle and set_twiddle
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Tue Mar 16 22:26:11 UTC 2021 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Update to version 4.1
|
||||
* rigctld and rigs should be more robust for disconnect problems
|
||||
* Several fixes for Icom and Yaesu rigs
|
||||
* Nobody should need to use rig->caps or rig->state anymore
|
||||
* New rig_get_caps_int and rig_get_caps_cptr functions to replace
|
||||
using caps-> values
|
||||
* New rig_get_function to replace using caps-> function pointers
|
||||
* Fix shared library problem with WSJTX, JTDX, and JS8Call
|
||||
* New model Barrett 950
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Jan 07 08:26:57 UTC 2021 - Wang Jun <jgwang@suse.com>
|
||||
|
||||
- Update to version 4.0
|
||||
* Major changes in 4.0 affecting usage
|
||||
* Most rig model numbers have changed
|
||||
* RIG_LEVEL_VOX has been deprecated and replaced by RIG_LEVEL_VOXDELAY
|
||||
* rigctl 'f' command now returns VFO argument too
|
||||
* rigctl 'y' and 'Y' command now take/show antenna argument and option.
|
||||
* range_list items are undergoing changes towards a different model TBD
|
||||
* RTS/DTR PTT sharing is off by default now -- use serial_share=1
|
||||
option to enable
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Wed Apr 29 23:14:25 UTC 2020 - Wojciech Kazubski <wk@ire.pw.edu.pl>
|
||||
|
||||
- Tumbleweed: Python backend built for python-3.8
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Apr 25 07:58:17 UTC 2020 - Martin Pluskal <mpluskal@suse.com>
|
||||
|
||||
- Do not build python2 bindings for Tumbleweed
|
||||
- Modernise spec file
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Aug 30 19:01:52 UTC 2018 - mardnh@gmx.de
|
||||
|
||||
- Update to version 3.3
|
||||
* New models, R&S xk2100, TRXMAnager, Meade LX200
|
||||
* HTML manual is now generated at 'make dist' so users don't
|
||||
need GNU Info tools installed. TNX Greg, N1DAM for the suggestion.
|
||||
* Handle longer udev generated file names up to 512 characters
|
||||
* Add debug time stamps with new '-Z' option and '--debug-time-stamps'
|
||||
options to rigctl, rotctl, rigctld, and rotctld utilities.
|
||||
* rigctld/rotctld continue working after serial or TCP device
|
||||
disappears.
|
||||
* Updates and fixes to FT-817, K3, IC-7300, AOR 3030, TM-D710,
|
||||
OMNI VII, TH-D72, Flrig, TS-590, piHPSDR, TS-2000, and netrigctl.
|
||||
* Update utility manual pages (section 1) and remove their reference
|
||||
material from the Info manual so it only needs to be update in one
|
||||
file.
|
||||
* Add new general project manual pages (section 7) and edit the Info
|
||||
manual to match. These should not change much so keeping them in
|
||||
sync should not be too much of a burden. The Info manual may be
|
||||
removed at some point in the future.
|
||||
* Last planned release of the present API/ABI. Future releases will
|
||||
require recompilation and relinking by client programs using the C
|
||||
library interface (programs that only use the network daemons should
|
||||
be unaffected).
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Wed Apr 4 10:31:02 UTC 2018 - mpluskal@suse.com
|
||||
|
||||
- Update dependencies
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Apr 1 18:54:17 UTC 2018 - mardnh@gmx.de
|
||||
|
||||
- Update to version 3.2
|
||||
* New models, IC-7850/IC-7851 in IC-785x. Mike, W9MDB
|
||||
* Fix ft991_get_mode, Mike, W9MDB
|
||||
* New model, FT-891. Mike, W9MDB
|
||||
* New Barrett 2050 backend, Mike, W9MDB
|
||||
* New Flrig backend, Mike, W9MDB
|
||||
* New model, IC-M710, Mike, W9MDB
|
||||
* Build instructions and test script for Python3
|
||||
* Rename autogen.sh to bootsrap and don't call configure
|
||||
* micro-ham support. Christoph, DL1YCF
|
||||
* New rotator, SPID MD-01/02 in ROT2 mode, Norvald Ryeng, LA6YKA
|
||||
* New model, Flex 6400/6600, Mike, W9MDB
|
||||
* New model, IC-7610, Mike, W9MDB
|
||||
* Add support for CM108B PTT, Max Lock
|
||||
* New model, Rohde & Schwarz XK2100, Mike, W9MDB
|
||||
* Many other bug fixes and enhancements
|
||||
- Rebase patch hamlib-3.0-perl_install.patch
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Jun 2 07:08:56 UTC 2017 - mpluskal@suse.com
|
||||
|
||||
- Install all license files
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Apr 27 11:07:13 UTC 2017 - jengelh@inai.de
|
||||
|
||||
- Ensure neutrality of description. Trim duplicate inner
|
||||
descrpitions.
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Apr 24 14:24:42 UTC 2017 - mpluskal@suse.com
|
||||
|
||||
- Cleanup package
|
||||
- Split subpackages with libraries
|
||||
- Enable tcl and perl bindings:
|
||||
* add hamlib-3.0-perl_install.patch
|
||||
- Run internal testsuite
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Apr 16 15:13:34 UTC 2017 - mardnh@gmx.de
|
||||
|
||||
- update to version 3.1 (tagged release)
|
||||
- minor specfile cleanup
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Apr 7 20:16:50 UTC 2017 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20170406
|
||||
New model: Icom IC-R6
|
||||
Allow RIG_LEVEL_STRENGTH queries over the network link
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Mar 5 17:33:38 UTC 2017 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20170227
|
||||
Fix a state machine defect with repeated PTT reset calls
|
||||
Add Dorji DRA818 modules (VHF and UHF variants)
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Feb 19 19:54:09 UTC 2017 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20170219
|
||||
Fix some endian issues in the si570/AVR SDR back ends
|
||||
Added x108g backend
|
||||
Fix FT-891 recognition
|
||||
Breakout FT-1000D file for full support
|
||||
Fix DIG MODE for FT817-ND
|
||||
Add support for AGC Levels
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Jan 28 15:52:06 UTC 2017 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20170127
|
||||
Added HPSDR backend
|
||||
Fix ic785x default addr to 0x8e
|
||||
Clears potential garbage data in read buffer prior to command being sent
|
||||
Updated PiHPSDR backend defaults
|
||||
Use Windows ioctlsocket to avoid buffer overrun
|
||||
Add get and set split functions for the TS450S
|
||||
Simplify and fix defects in the FT991 back end
|
||||
Added HPSDR backend
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Jan 7 22:57:26 UTC 2017 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20170107
|
||||
Fix ft991_get_mode
|
||||
New models: IC-7849/IC-7851, FT-891
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Dec 25 21:25:19 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20161225
|
||||
Fix typos
|
||||
Corrected a few bugs and rebased from Ervin's (HA2OS) pull request.
|
||||
Added new example to Python demo script (set/get float type level)
|
||||
Added Lua binding and demo script
|
||||
Adds test for ID 907 for the Flex 6300
|
||||
python-binding and lua-binding enabled
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Nov 19 20:17:36 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20161119
|
||||
Move K3 DT0 before mode switch, add version info to electraft rig open,
|
||||
WSJT-X VOX rig split now works
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Tue Nov 8 23:31:48 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20161106
|
||||
New Perseus model
|
||||
Fixed buffer overflow in rigctl_parse and rotctl_parse
|
||||
Changed some modules to LGPL in lieu of GPL
|
||||
Change the IC7600 & IC7800 set/get mode to versions that support DATA…
|
||||
fix set_vfo behavior of TS2000
|
||||
fix NET rigctl
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Sep 5 11:06:40 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20160904
|
||||
xg3: fix buffer overflow
|
||||
Fix issue with TS-570S|D open in rig_caps
|
||||
Release the serial port used for PTT when possible
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Aug 27 18:04:35 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20160827
|
||||
Fix an issue presenting on the Yaesu FT-450(D)
|
||||
Fix issue with TS-570S|D open in rig_caps
|
||||
Updated smeter calibration for ic7300
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Jun 12 12:27:02 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20160611
|
||||
implemented set_conf, get_conf and Token fast_set_commands for max
|
||||
throughput
|
||||
Yaesu Fast Set Commands (High throughput for commands)
|
||||
added send_morse and civ_version to ic7100/ic7600
|
||||
added get/set_conf for FT1200, FT2000, FT450, FT5000 and FT9000
|
||||
Fixed SCAN_STOP for all rigs and implmented it plus SCOPE for ic7300
|
||||
Changes for IC-7300 and IC-7200
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon May 23 17:19:05 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20160521
|
||||
Do not attempt to query AI state on several Kenwood rigs
|
||||
Add some functionality to the tmd710
|
||||
Add send_morse to icom rigs
|
||||
Do not crash if expected CTCSS tones not sepcified
|
||||
Add RIG_PASSBAND_NOCHANGE as possible set_{split_,split_freq_,}mode a…
|
||||
Initial support for the IC-7300
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Apr 4 19:53:24 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20160402
|
||||
Added support for Icom IC-2730
|
||||
Use rig state rig port retry option rather than from capabilities
|
||||
Use a sensible port timeout value for the Kenwood TS-850
|
||||
Make sure right band is used when setting frequency on IC-910(H)
|
||||
VFO targetable get frequency operation for the Icom IC-910(h)
|
||||
Better set frequency semantics for the IC-910(h)
|
||||
Do not swap VFO unnecessarily
|
||||
Elide unnecessary CAT commands when setting split frequency and mode
|
||||
Add {get,set}_splitfrequency_mode for the IC-910(H)
|
||||
Implement rig_{set,get}_split_freq_mode() for IC-756 series.
|
||||
Initial implementation of rig_{set,get}_split_freq_mode() for FT-857.
|
||||
Implement combined split VFO frequency and mode setting.
|
||||
Fixed get_vfo for FT-757GX(II)
|
||||
Allow the ft757gx to work with WSJT-X
|
||||
Add 23cms to IC-910(H) backend
|
||||
Improve IPv6 portability and consistency
|
||||
Various Yaesu updates
|
||||
Add get_freq to FRG-100
|
||||
Favor $HOME over '~' in text
|
||||
Fix a logic error in band detection during IC-910 set frequency
|
||||
Merge branch 'ic910-set-freq' of git://git.code.sf.net/u/bsomervi/hamlib
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Jan 16 23:28:33 UTC 2016 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20160115
|
||||
Fix possible frequency overflow on Kenwood and Yaesu
|
||||
Install daemon man files to man1
|
||||
New Prosistel rotor backend from IZ7CRX
|
||||
Fix missing PKTUSB mode setting code for FT-817 & FT-897
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Dec 11 19:53:13 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20151207
|
||||
Fix FT-817/857/897 issues and add some missing functionality
|
||||
Use correct function to execute set type commands with no response
|
||||
Add a new command line option '--no-restore-ai' ('-n') to rigctl
|
||||
Allow for poor emulations of Kenwood rigs that have no ID command
|
||||
Attempt to restore AI status on exit
|
||||
Proper IPv6 and dual stack networking
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Nov 22 00:15:46 UTC 2015 - dl8fcl@t-online.de
|
||||
|
||||
- update to version 3.1_git20151122
|
||||
Remove unecessary delays from TS-940S backend
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Nov 9 22:18:29 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20151109
|
||||
change command validation for Yaesu set commands
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Sep 20 21:35:34 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.1_git20150920
|
||||
fix kenwood_set_mode for ts590s and mode CW, RTTY or AM
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Thu Sep 3 22:36:46 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150903
|
||||
Add library paths for tests
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sat Aug 22 23:26:00 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150822
|
||||
New CNCTRK rotor backend
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Aug 17 23:13:06 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150815
|
||||
Fixes power level reporting for the Omni VII. Backend is
|
||||
promoted to STABLE status.
|
||||
Fixes S meter reporting for FT857 and FT991.
|
||||
Fixes rig split for FT991. Working now for WSJT-X rig split mode.
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Jul 27 11:21:42 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150727
|
||||
Allows the FT-991 to work with Fake Split in WSJT-X
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Jul 17 11:29:07 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150717
|
||||
Fix for Yaesu FT-991
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Jul 3 23:00:42 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150703
|
||||
Omni VII patch for WSJT-X
|
||||
|
||||
-----------------------------------------------------------------
|
||||
Sat May 23 21:30:25 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150523
|
||||
Omni VII set VFO_CURR correctly
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Apr 26 19:38:52 UTC 2015 - dl8fcl@darc.de
|
||||
|
||||
- update to version 3.0_git20150425 - beta version
|
||||
with a lot of new features and new rig backends
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Nov 9 00:06:33 UTC 2012 - dl8fcl@darc.de
|
||||
|
||||
- update to version 1.2.15.3
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Fri Feb 3 09:08:53 UTC 2012 - dl8fcl@darc.de
|
||||
|
||||
- update to version 1.2.15
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Jul 31 20:37:44 UTC 2011 - dl8fcl@darc.de
|
||||
|
||||
- update to version 1.2.14
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun May 29 13:24:41 UTC 2011 - dl8fcl@darc.de
|
||||
|
||||
- update to version 1.2.13.1
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Sun Mar 13 16:29:03 UTC 2011 - dl8fcl@darc.de
|
||||
|
||||
- update to version 1.2.13
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Sep 6 21:26:30 UTC 2010 - dl8fcl@darc.de
|
||||
|
||||
- update to version 1.2.12
|
||||
|
||||
-------------------------------------------------------------------
|
||||
Mon Jun 7 17:28:17 UTC 2010 - dl8fcl@darc.de
|
||||
|
||||
- update to version 1.2.11
|
||||
-------------------------------------------------------------------
|
||||
* Tue Nov 02 2009 - dl8fcl@darc.de
|
||||
- update to version 1.2.10
|
||||
* Sun Mar 01 2009 - dl8fcl@darc.de
|
||||
- update to version 1.2.9
|
||||
* Mon Nov 03 2008 - dl8fcl@darc.de
|
||||
- update to version 1.2.8
|
||||
- disabled src_misc_c_strcmp.diff
|
||||
* Sun Jul 22 2007 - dl9pf@gmx.de
|
||||
- version 1.2.6.2
|
||||
* Wed Feb 20 2007 - dl9pf@gmx.de
|
||||
- import into buildservice
|
||||
- version 1.2.6
|
||||
* Tue Jun 20 2006 Tim Fischer
|
||||
- rewrite spec file for SUSE 10.1
|
||||
* Tue Sep 26 2004 Stephane Fillod
|
||||
- New backends: skanti, racal, wj, tuner
|
||||
- New command 'rigswr'
|
||||
* Tue Jan 20 2004 Tomi Manninen
|
||||
- Fix for 1.1.5pre2
|
||||
- Better use of rpm macros
|
||||
- Disable all bindings
|
||||
* Tue Oct 08 2003 Joop Stakenborg
|
||||
- Fix 'make rpm' again by disabling c++ bindings.
|
||||
- rotclass.h and rigclass.h go into the devel package for now (FIXME)
|
||||
* Wed Jan 15 2003 Joop Stakenborg
|
||||
- Fix the spec file for 1.1.4CVS
|
||||
- 'make rpm' should work now
|
||||
* Thu Jun 17 2002 Stephane Fillod
|
||||
- Added rotator support
|
||||
- Added RPC daemon, hamlib.m4
|
||||
* Mon Jul 18 2001 Stephane Fillod
|
||||
- Made initial "working" SPEC file
|
||||
|
||||
28
hamlib.keyring
Normal file
28
hamlib.keyring
Normal file
@ -0,0 +1,28 @@
|
||||
-----BEGIN PGP PUBLIC KEY BLOCK-----
|
||||
Version: SKS 1.1.6+
|
||||
Comment: Hostname: carles.tubio.sks-database_1
|
||||
|
||||
mQGiBDkO46ERBADFjo8fxGXL0mQnTLfjdmxUnZ2B/PKjwEZjTS6ndXAVc4hq0msKBpFQJcRG
|
||||
BIZZVvhzo5BITPTEF6YwTkTsx0wYRHp7xpGk0H3PbAjCsSCLPIOAYQJTKCZKIGuYlKmIYbF6
|
||||
yvA0ADhR7cK1EOKANLR3ERsnt6H+0UFAP13WCJzKawCguGzan7PUNS10ivGh0irhgTDW/T8D
|
||||
/3WMHdDdogQFbPhfPY5pldiIbsxzr85zO8BxB+MSLEomuPmeQBO4NYyXrN5J0i75B6nJIm4y
|
||||
gFDzSaqTqExTkHKwAG7BLUWau8z3KzVf9mRonUizxPIQ++Z47CnjEMzVLLNnz2He3tsph49F
|
||||
PW2htRx6fIY4LRRFXtUiYKReD+fCA/sHxmNyW4iok8pbzU+bQRvVTiD0wwvZy4uhGat6PtcU
|
||||
pKgV7/MrDvCDfXL37Bd/u5/qChQotu7yqgJbjbi7FqD/ztd8i642JwdR2CezauUc8meGWApt
|
||||
EkE/l+n2AQ7GlaC6Cvv5CwbvYzvioE+mxA8Y3o4qN0hVfAZcF2Fk/oTGWLQhTmF0ZSBCYXJn
|
||||
bWFubiAoeDMpIDxuMG5iQG4wbmIudXM+iGIEExECACIFAkvxwBYCGyMGCwkIBwMCBhUIAgkK
|
||||
CwQWAgMBAh4BAheAAAoJEPssUTDVWogZx+IAoKuFiNYHp5sarQhTdQzVars7EDjpAJoDxrHj
|
||||
A2RaS2xcdIqzlPoEWzupbLQtTmF0ZSBCYXJnbWFubiAoRGl0dG8pIDxuMG5iQG5ldHdvcmtz
|
||||
cGx1cy5uZXQ+iFYEExECABYFAjndspsECwoEAwMVAwIDFgIBAheAAAoJEPssUTDVWogZGEYA
|
||||
oLVdigZIj9ihG0Iz5qcLST3IHgTeAJ0QroWcRvpfxEG70NIFMefCBzlkNLQ3TmF0ZSBCYXJn
|
||||
bWFubiAoTXVycGh5IHdhcyBhbiBvcHRpbWlzdC4pIDxuMG5iQGFycmwubmV0PohWBBMRAgAW
|
||||
BQI5DuOhBAsKBAMDFQMCAxYCAQIXgAAKCRD7LFEw1VqIGbU+AJ4hVX2SD0jjQyYcKfxpJOFp
|
||||
6ZrOqgCglZG1eF98fKgNDV3qWLEpZlDIVA+5AQ0EOQ7jtxAEAItOjxolRDP4B1J+uWHm+otF
|
||||
DHpI4UB8RrfmS0z4HSe3lBTgRq84qZDnfd71ICDKwx6zfrA47UWABngj3JYp7a8wdFWGc/Ou
|
||||
f6UDrRdo0PUg2yYnIWaOPFlZrU1JBvnqqcy2E111iD3WoqPMKFQVLeSZBQSdvFG3Yn28oyQ5
|
||||
WUdrAAMFA/wJfZ+jxJZb5Yv0l9p1oDAc2MCWuzzMjTcPpMjWdWA5e9NkWPjxdv73hg33QQqW
|
||||
BZ8nGaWN6e9Bh5rW4R/PhrIiARO9GuWc/EKb+OysMtRgY0HzgNL7N6R0qa8XOKI7Yxt31jUB
|
||||
bvNRY6jIr39Ubn+8BBPDEPdE4Diehite/irEy4hGBBgRAgAGBQI5DuO3AAoJEPssUTDVWogZ
|
||||
wDoAn2ghIVE0B/2Lmerm1ZEIoQM/CFWlAJ0TalEm1lB3F0eVrrz71qfZsevpiw==
|
||||
=xD9C
|
||||
-----END PGP PUBLIC KEY BLOCK-----
|
||||
215
hamlib.spec
Normal file
215
hamlib.spec
Normal file
@ -0,0 +1,215 @@
|
||||
#
|
||||
# spec file for package hamlib
|
||||
#
|
||||
# Copyright (c) 2024 SUSE LLC
|
||||
#
|
||||
# All modifications and additions to the file contributed by third parties
|
||||
# remain the property of their copyright owners, unless otherwise agreed
|
||||
# upon. The license for this file, and modifications and additions to the
|
||||
# file, is the same license as for the pristine package itself (unless the
|
||||
# license for the pristine package is not an Open Source License, in which
|
||||
# case the license is the MIT License). An "Open Source License" is a
|
||||
# license that conforms to the Open Source Definition (Version 1.9)
|
||||
# published by the Open Source Initiative.
|
||||
|
||||
# Please submit bugfixes or comments via https://bugs.opensuse.org/
|
||||
#
|
||||
|
||||
|
||||
%define sover 4
|
||||
Name: hamlib
|
||||
Version: 4.6
|
||||
Release: 0
|
||||
Summary: Run-time library to control radio transcievers and receivers
|
||||
License: LGPL-2.1-only
|
||||
Group: Productivity/Hamradio/Other
|
||||
URL: https://hamlib.github.io/
|
||||
Source: https://github.com/Hamlib/Hamlib/releases/download/%{version}/%{name}-%{version}.tar.gz
|
||||
Source2: https://github.com/Hamlib/Hamlib/releases/download/%{version}/%{name}-%{version}.tar.gz.asc
|
||||
# taken from debian
|
||||
Source3: %{name}.keyring
|
||||
Patch0: hamlib-3.0-perl_install.patch
|
||||
BuildRequires: fdupes
|
||||
BuildRequires: gcc-c++
|
||||
BuildRequires: libtool
|
||||
BuildRequires: perl
|
||||
BuildRequires: pkgconfig
|
||||
BuildRequires: python-rpm-macros
|
||||
BuildRequires: readline-devel
|
||||
BuildRequires: swig
|
||||
BuildRequires: pkgconfig(gdlib)
|
||||
BuildRequires: pkgconfig(libusb-1.0)
|
||||
BuildRequires: pkgconfig(libxml-2.0)
|
||||
BuildRequires: pkgconfig(lua)
|
||||
BuildRequires: pkgconfig(python3)
|
||||
BuildRequires: pkgconfig(tcl)
|
||||
|
||||
%description
|
||||
The Ham Radio Control Libraries (Hamlib) provide a programming
|
||||
interface for controlling radios and other shack hardware.
|
||||
It is a software layer, not a complete user application.
|
||||
|
||||
%package devel
|
||||
Summary: Development files for hamlib, a set of radio control libraries
|
||||
Group: Development/Libraries/Other
|
||||
Requires: libhamlib%{sover} = %{version}
|
||||
Requires: libhamlib++%{sover} = %{version}
|
||||
|
||||
%description devel
|
||||
Hamlib provide a programming interface for controlling radios and
|
||||
other shack hardware.
|
||||
|
||||
%package -n libhamlib++%{sover}
|
||||
Summary: C++ interface of the Ham Radio Control Libraries
|
||||
Group: System/Libraries
|
||||
|
||||
%description -n libhamlib++%{sover}
|
||||
Hamlib provides a programming interface for controlling radios and
|
||||
other shack hardware. It is a software layer, not a complete user
|
||||
application.
|
||||
|
||||
%package -n libhamlib%{sover}
|
||||
Summary: C interface of the Ham Radio Control Libraries
|
||||
Group: System/Libraries
|
||||
|
||||
%description -n libhamlib%{sover}
|
||||
Hamlib provides a programming interface for controlling radios and
|
||||
other shack hardware. It is a software layer, not a complete user
|
||||
application.
|
||||
|
||||
%package -n lua-Hamliblua
|
||||
Summary: LUA bindings for Hamlib
|
||||
Group: Development/Libraries/Other
|
||||
|
||||
%description -n lua-Hamliblua
|
||||
Hamlib provide a programming interface for controlling radios and
|
||||
other shack hardware.
|
||||
|
||||
%package -n python3-Hamlib
|
||||
Summary: Python 3 bindings for Hamlib
|
||||
Group: Development/Libraries/Python
|
||||
|
||||
%description -n python3-Hamlib
|
||||
Hamlib provide a programming interface for controlling radios and
|
||||
other shack hardware.
|
||||
|
||||
%package -n tcl-Hamlib
|
||||
Summary: Tcl bindings for Hamlib
|
||||
Group: Development/Languages/Tcl
|
||||
%requires_ge tcl
|
||||
|
||||
%description -n tcl-Hamlib
|
||||
Hamlib provide a programming interface for controlling radios and
|
||||
other shack hardware.
|
||||
|
||||
%package -n perl-Hamlib
|
||||
Summary: Perl bindings for Hamlib
|
||||
Group: Development/Languages/Perl
|
||||
%requires_ge perl-base
|
||||
|
||||
%description -n perl-Hamlib
|
||||
Hamlib provide a programming interface for controlling radios and
|
||||
other shack hardware.
|
||||
|
||||
%prep
|
||||
%autosetup -p1
|
||||
|
||||
%build
|
||||
autoreconf -fiv
|
||||
%configure \
|
||||
--with-perl-binding \
|
||||
--with-tcl-binding \
|
||||
--with-lua-binding \
|
||||
--with-python-binding PYTHON_VERSION=%py3_ver \
|
||||
--with-xml-support
|
||||
%make_build
|
||||
|
||||
%install
|
||||
%make_install
|
||||
find %{buildroot} -type f \( -name '*.a' -o -name '*.la' \) -delete -print
|
||||
|
||||
rm %{buildroot}%{perl_vendorarch}/auto/Hamlib/.packlist
|
||||
|
||||
mkdir -p %{buildroot}%{_docdir}
|
||||
mv %{buildroot}/%{_datadir}/doc/%{name} %{buildroot}%{_docdir}
|
||||
|
||||
%fdupes %{buildroot}%{python_sitearch}
|
||||
|
||||
%check
|
||||
%make_build check
|
||||
|
||||
%post -n libhamlib++%{sover} -p /sbin/ldconfig
|
||||
%post -n libhamlib%{sover} -p /sbin/ldconfig
|
||||
%postun -n libhamlib++%{sover} -p /sbin/ldconfig
|
||||
%postun -n libhamlib%{sover} -p /sbin/ldconfig
|
||||
|
||||
%files
|
||||
%license LICENSE
|
||||
%doc AUTHORS NEWS
|
||||
%{_bindir}/rigctl
|
||||
%{_bindir}/rigctld
|
||||
%{_bindir}/rigctlsync
|
||||
%{_bindir}/rigctltcp
|
||||
%{_bindir}/rigfreqwalk
|
||||
%{_bindir}/rigmem
|
||||
%{_bindir}/rigsmtr
|
||||
%{_bindir}/rigswr
|
||||
%{_bindir}/rigtestmcast
|
||||
%{_bindir}/rigtestmcastrx
|
||||
%{_bindir}/rotctl
|
||||
%{_bindir}/rotctld
|
||||
%{_bindir}/ampctl
|
||||
%{_bindir}/ampctld
|
||||
%{_bindir}/rigctlcom
|
||||
%{_bindir}/rigtestlibusb
|
||||
%{_mandir}/man1/rigctl.1%{?ext_man}
|
||||
%{_mandir}/man1/rigctld.1%{?ext_man}
|
||||
%{_mandir}/man1/rigctlsync.1%{?ext_man}
|
||||
%{_mandir}/man1/rigmem.1%{?ext_man}
|
||||
%{_mandir}/man1/rigsmtr.1%{?ext_man}
|
||||
%{_mandir}/man1/rigswr.1%{?ext_man}
|
||||
%{_mandir}/man1/rotctl.1%{?ext_man}
|
||||
%{_mandir}/man1/rotctld.1%{?ext_man}
|
||||
%{_mandir}/man1/ampctl.1%{?ext_man}
|
||||
%{_mandir}/man1/ampctld.1%{?ext_man}
|
||||
%{_mandir}/man1/rigctlcom.1%{?ext_man}
|
||||
%{_mandir}/man7/hamlib-primer.7%{?ext_man}
|
||||
%{_mandir}/man7/hamlib-utilities.7%{?ext_man}
|
||||
%{_mandir}/man7/hamlib.7%{?ext_man}
|
||||
%{_docdir}/hamlib
|
||||
%exclude %{_docdir}/hamlib/COPYING*
|
||||
%exclude %{_docdir}/hamlib/LICENSE
|
||||
|
||||
%files devel
|
||||
%dir %{_includedir}/hamlib
|
||||
%{_includedir}/hamlib/*.h
|
||||
%{_datadir}/aclocal/hamlib.m4
|
||||
%{_libdir}/pkgconfig/hamlib.pc
|
||||
%{_libdir}/libhamlib.so
|
||||
%{_libdir}/libhamlib++.so
|
||||
|
||||
%files -n libhamlib%{sover}
|
||||
%license COPYING COPYING.LIB
|
||||
%{_libdir}/libhamlib.so.%{sover}*
|
||||
|
||||
%files -n libhamlib++%{sover}
|
||||
%license COPYING COPYING.LIB
|
||||
%{_libdir}/libhamlib++.so.%{sover}*
|
||||
|
||||
%files -n lua-Hamliblua
|
||||
%{_libdir}/lua
|
||||
|
||||
%files -n python3-Hamlib
|
||||
%{python3_sitearch}/Hamlib.*
|
||||
%{python3_sitearch}/_Hamlib.*
|
||||
%{python3_sitearch}/__pycache__/Hamlib.cpython*.pyc
|
||||
|
||||
%files -n tcl-Hamlib
|
||||
%dir %{_libdir}/tcl*/
|
||||
%dir %{_libdir}/tcl*/Hamlib
|
||||
%{_libdir}/tcl*/Hamlib/*
|
||||
|
||||
%files -n perl-Hamlib
|
||||
%{perl_vendorarch}/*
|
||||
|
||||
%changelog
|
||||
Loading…
x
Reference in New Issue
Block a user