4525ce5117
- Update to version 4.5.5 (2023-04-05)
* Add park to rotorez.c
* Fix rig power on/off from rigctl cmd line and rigctld
* Enable async mode by default to prevent WSJT-X crash on IC9700
with transceive on
* Fix IC7610 get_powerstat to disable it -- cannot read power status
* Fix K3 K22 command error for remote operations
* Fix Gemini DX1200 gemini_set_level
* Fix async I/O to not call flush
* Change EX startup commands for Yaesu rigs to allow
errors...Win4Yaesu not recognizing EX commands
* Fix jst145 set_freq and get_freq
* Restore tcflush as some odd behavior was seen that tclush fixes
* Fix XG3 operations
* Separate the validation cmd in newcat.c to allow rig
post_write_delay to be in effect
* Increase post_write to 20ms for FT710
* Add attenuator level control for TS890
* Update SMeter/SWR tables for TS890
* Add fix for TMD700
* Improve FT-857 get_vfo response when error occurs
* Allow FT-857 to use cached vfo on get_vfo when error
occurs reading EEPROM
* Fix FTDX10 FT710 set_level AF
* Fix FT-450D detection
* Fix VFO A/B swapping for gpredict -- hopefully better
behavior for VFO swapping rigs. Should avoid setting RX freq
while TX and avoid TX freq while RX
* Fix QRP QDX PTT to new TQ command due to firmware changes
* Remove EX103 check for FTDX5000
* Fix K3/K3S VFOB setting of mode/width
* Fix AGC level display in rigctld
* Change FTDX10 to no serial handshake
* Add TS2000 to has_ps exception
* Add FT991 to 60M exception
* Fix get_powerstat bad call in rigctl_parse.c
* Really fix CM108 ptt_bitnum usage
* Fix Elecraft power2mW precision/accuracy
* Fix power on/off/on for Icom rigs with rigctld power_on=0
OBS-URL: https://build.opensuse.org/request/show/1078165
OBS-URL: https://build.opensuse.org/package/show/hardware:sdr/hamlib?expand=0&rev=39
217 lines
6.1 KiB
RPMSpec
217 lines
6.1 KiB
RPMSpec
#
|
|
# spec file for package hamlib
|
|
#
|
|
# Copyright (c) 2022 SUSE LLC
|
|
#
|
|
# All modifications and additions to the file contributed by third parties
|
|
# remain the property of their copyright owners, unless otherwise agreed
|
|
# upon. The license for this file, and modifications and additions to the
|
|
# file, is the same license as for the pristine package itself (unless the
|
|
# license for the pristine package is not an Open Source License, in which
|
|
# case the license is the MIT License). An "Open Source License" is a
|
|
# license that conforms to the Open Source Definition (Version 1.9)
|
|
# published by the Open Source Initiative.
|
|
|
|
# Please submit bugfixes or comments via https://bugs.opensuse.org/
|
|
#
|
|
|
|
|
|
%define sover 4
|
|
Name: hamlib
|
|
Version: 4.5.5
|
|
Release: 0
|
|
Summary: Run-time library to control radio transcievers and receivers
|
|
License: LGPL-2.1-only
|
|
Group: Productivity/Hamradio/Other
|
|
URL: https://hamlib.github.io/
|
|
Source: https://github.com/Hamlib/Hamlib/archive/refs/tags/%{version}.tar.gz#/Hamlib-%{version}.tar.gz
|
|
# PATCH-FIX-OPENSUSE hamlib-3.0-perl_install.patch -- patch from Fedora
|
|
Patch0: hamlib-3.0-perl_install.patch
|
|
BuildRequires: fdupes
|
|
BuildRequires: gcc-c++
|
|
BuildRequires: libtool
|
|
BuildRequires: makeinfo
|
|
BuildRequires: perl
|
|
BuildRequires: pkgconfig
|
|
BuildRequires: python-rpm-macros
|
|
BuildRequires: readline-devel
|
|
BuildRequires: swig
|
|
BuildRequires: pkgconfig(gdlib)
|
|
BuildRequires: pkgconfig(libusb-1.0)
|
|
BuildRequires: pkgconfig(libxml-2.0)
|
|
BuildRequires: pkgconfig(lua)
|
|
BuildRequires: pkgconfig(python3)
|
|
BuildRequires: pkgconfig(tcl)
|
|
Requires(post): %{install_info_prereq}
|
|
Requires(preun): %{install_info_prereq}
|
|
|
|
%description
|
|
The Ham Radio Control Libraries (Hamlib) provide a programming
|
|
interface for controlling radios and other shack hardware.
|
|
It is a software layer, not a complete user application.
|
|
|
|
%package devel
|
|
Summary: Development files for hamlib, a set of radio control libraries
|
|
Group: Development/Libraries/Other
|
|
Requires: libhamlib%{sover} = %{version}
|
|
Requires: libhamlib++%{sover} = %{version}
|
|
|
|
%description devel
|
|
Hamlib provide a programming interface for controlling radios and
|
|
other shack hardware.
|
|
|
|
%package -n libhamlib++%{sover}
|
|
Summary: C++ interface of the Ham Radio Control Libraries
|
|
Group: System/Libraries
|
|
|
|
%description -n libhamlib++%{sover}
|
|
Hamlib provides a programming interface for controlling radios and
|
|
other shack hardware. It is a software layer, not a complete user
|
|
application.
|
|
|
|
%package -n libhamlib%{sover}
|
|
Summary: C interface of the Ham Radio Control Libraries
|
|
Group: System/Libraries
|
|
|
|
%description -n libhamlib%{sover}
|
|
Hamlib provides a programming interface for controlling radios and
|
|
other shack hardware. It is a software layer, not a complete user
|
|
application.
|
|
|
|
%package -n lua-Hamliblua
|
|
Summary: LUA bindings for Hamlib
|
|
Group: Development/Libraries/Other
|
|
|
|
%description -n lua-Hamliblua
|
|
Hamlib provide a programming interface for controlling radios and
|
|
other shack hardware.
|
|
|
|
%package -n python3-Hamlib
|
|
Summary: Python 3 bindings for Hamlib
|
|
Group: Development/Libraries/Python
|
|
|
|
%description -n python3-Hamlib
|
|
Hamlib provide a programming interface for controlling radios and
|
|
other shack hardware.
|
|
|
|
%package -n tcl-Hamlib
|
|
Summary: Tcl bindings for Hamlib
|
|
Group: Development/Languages/Tcl
|
|
%requires_ge tcl
|
|
|
|
%description -n tcl-Hamlib
|
|
Hamlib provide a programming interface for controlling radios and
|
|
other shack hardware.
|
|
|
|
%package -n perl-Hamlib
|
|
Summary: Perl bindings for Hamlib
|
|
Group: Development/Languages/Perl
|
|
%requires_ge perl-base
|
|
|
|
%description -n perl-Hamlib
|
|
Hamlib provide a programming interface for controlling radios and
|
|
other shack hardware.
|
|
|
|
%prep
|
|
%autosetup -p1 -n Hamlib-%{version}
|
|
|
|
%build
|
|
autoreconf -fiv
|
|
%configure \
|
|
--with-perl-binding \
|
|
--with-tcl-binding \
|
|
--with-lua-binding \
|
|
--with-python-binding PYTHON_VERSION=%py3_ver \
|
|
--with-xml-support
|
|
%make_build
|
|
|
|
%install
|
|
%make_install
|
|
find %{buildroot} -type f \( -name '*.a' -o -name '*.la' \) -delete -print
|
|
|
|
rm %{buildroot}%{perl_vendorarch}/auto/Hamlib/.packlist
|
|
|
|
mkdir -p %{buildroot}%{_docdir}
|
|
mv %{buildroot}/%{_datadir}/doc/%{name} %{buildroot}%{_docdir}
|
|
|
|
%fdupes %{buildroot}%{python_sitearch}
|
|
|
|
%check
|
|
%make_build check
|
|
|
|
%post
|
|
%install_info --info-dir=%{_infodir} %{_infodir}/%{name}.info%{ext_info}
|
|
|
|
%preun
|
|
%install_info_delete --info-dir=%{_infodir} %{_infodir}/%{name}.info%{ext_info}
|
|
|
|
%post -n libhamlib++%{sover} -p /sbin/ldconfig
|
|
%post -n libhamlib%{sover} -p /sbin/ldconfig
|
|
%postun -n libhamlib++%{sover} -p /sbin/ldconfig
|
|
%postun -n libhamlib%{sover} -p /sbin/ldconfig
|
|
|
|
%files
|
|
%license LICENSE
|
|
%doc AUTHORS NEWS
|
|
%{_bindir}/rigctl
|
|
%{_bindir}/rigctld
|
|
%{_bindir}/rigmem
|
|
%{_bindir}/rigsmtr
|
|
%{_bindir}/rigswr
|
|
%{_bindir}/rotctl
|
|
%{_bindir}/rotctld
|
|
%{_bindir}/ampctl
|
|
%{_bindir}/ampctld
|
|
%{_bindir}/rigctlcom
|
|
%{_bindir}/rigtestlibusb
|
|
%{_mandir}/man1/rigctl.1%{?ext_man}
|
|
%{_mandir}/man1/rigctld.1%{?ext_man}
|
|
%{_mandir}/man1/rigmem.1%{?ext_man}
|
|
%{_mandir}/man1/rigsmtr.1%{?ext_man}
|
|
%{_mandir}/man1/rigswr.1%{?ext_man}
|
|
%{_mandir}/man1/rotctl.1%{?ext_man}
|
|
%{_mandir}/man1/rotctld.1%{?ext_man}
|
|
%{_mandir}/man1/ampctl.1%{?ext_man}
|
|
%{_mandir}/man1/ampctld.1%{?ext_man}
|
|
%{_mandir}/man1/rigctlcom.1%{?ext_man}
|
|
%{_mandir}/man7/hamlib-primer.7%{?ext_man}
|
|
%{_mandir}/man7/hamlib-utilities.7%{?ext_man}
|
|
%{_mandir}/man7/hamlib.7%{?ext_man}
|
|
%{_docdir}/hamlib
|
|
%exclude %{_docdir}/hamlib/COPYING*
|
|
%exclude %{_docdir}/hamlib/LICENSE
|
|
|
|
%files devel
|
|
%dir %{_includedir}/hamlib
|
|
%{_includedir}/hamlib/*.h
|
|
%{_datadir}/aclocal/hamlib.m4
|
|
%{_libdir}/pkgconfig/hamlib.pc
|
|
%{_libdir}/libhamlib.so
|
|
%{_libdir}/libhamlib++.so
|
|
|
|
%files -n libhamlib%{sover}
|
|
%license COPYING COPYING.LIB
|
|
%{_libdir}/libhamlib.so.%{sover}*
|
|
|
|
%files -n libhamlib++%{sover}
|
|
%license COPYING COPYING.LIB
|
|
%{_libdir}/libhamlib++.so.%{sover}*
|
|
|
|
%files -n lua-Hamliblua
|
|
%{_libdir}/lua
|
|
|
|
%files -n python3-Hamlib
|
|
%{python3_sitearch}/Hamlib.*
|
|
%{python3_sitearch}/_Hamlib.*
|
|
%{python3_sitearch}/__pycache__/Hamlib.cpython*.pyc
|
|
|
|
%files -n tcl-Hamlib
|
|
%dir %{_libdir}/tcl*/
|
|
%dir %{_libdir}/tcl*/Hamlib
|
|
%{_libdir}/tcl*/Hamlib/*
|
|
|
|
%files -n perl-Hamlib
|
|
%{perl_vendorarch}/*
|
|
|
|
%changelog
|