diff --git a/hdparm-6.3-err_return.patch b/hdparm-6.3-err_return.patch
index 9eaefea..9fd851c 100644
--- a/hdparm-6.3-err_return.patch
+++ b/hdparm-6.3-err_return.patch
@@ -63,7 +63,7 @@
  }
  
  static void on_off (unsigned int value)
-@@ -780,7 +786,7 @@
+@@ -784,7 +790,7 @@
  
  void process_dev (char *devname)
  {
@@ -72,7 +72,7 @@
  	static long parm, multcount;
  	__u16 *id = (void *)-1;
  
-@@ -796,14 +802,18 @@
+@@ -800,14 +806,18 @@
  	if (set_fsreadahead) {
  		if (get_fsreadahead)
  			printf(" setting fs readahead to %d\n", fsreadahead);
@@ -93,7 +93,7 @@
  	}
  	if (scan_hwif) {
  		int	args[3];
-@@ -811,8 +821,10 @@
+@@ -815,8 +825,10 @@
  		args[0] = hwif_data;
  		args[1] = hwif_ctrl;
  		args[2] = hwif_irq;
@@ -105,7 +105,7 @@
  	}
  	if (set_piomode) {
  		if (get_piomode) {
-@@ -825,68 +837,86 @@
+@@ -829,68 +841,86 @@
  			else
  				printf(" attempting to set UDMA mode to %d\n", (piomode-200));
  		}
@@ -201,7 +201,7 @@
  	}
  	if (set_doorlock) {
  		__u8 args[4] = {0,0,0,0};
-@@ -895,8 +925,10 @@
+@@ -899,8 +929,10 @@
  			printf(" setting drive doorlock to %d", doorlock);
  			on_off(doorlock);
  		}
@@ -213,7 +213,7 @@
  	}
  	if (set_dkeep) {
  		/* lock/unlock the drive's "feature" settings */
-@@ -906,24 +938,30 @@
+@@ -910,24 +942,30 @@
  			on_off(dkeep);
  		}
  		args[2] = dkeep ? 0x66 : 0xcc;
@@ -247,7 +247,7 @@
  	}
  	if (set_xfermode) {
  		__u8 args[4] = {ATA_OP_SETFEATURES,0,3,0};
-@@ -932,8 +970,10 @@
+@@ -936,8 +974,10 @@
  			printf(" setting xfermode to %d", xfermode_requested);
  			interpret_xfermode(xfermode_requested);
  		}
@@ -259,7 +259,7 @@
  	}
  	if (set_lookahead) {
  		__u8 args[4] = {ATA_OP_SETFEATURES,0,0,0};
-@@ -942,8 +982,10 @@
+@@ -946,8 +986,10 @@
  			printf(" setting drive read-lookahead to %d", lookahead);
  			on_off(lookahead);
  		}
@@ -271,7 +271,7 @@
  	}
  	if (set_powerup_in_standby) {
  		__u8 args[4] = {ATA_OP_SETFEATURES,0,0,0};
-@@ -978,14 +1020,18 @@
+@@ -982,14 +1024,18 @@
  			if (get_apmmode)
  				printf(" 0x%02x (%d)\n",apmmode,apmmode);
  		}
@@ -292,7 +292,7 @@
  	}
  	if (set_acoustic) {
  		__u8 args[4];
-@@ -995,8 +1041,10 @@
+@@ -999,8 +1045,10 @@
  		args[1] = acoustic;
  		args[2] = acoustic ? 0x42 : 0xc2;
  		args[3] = 0;
@@ -304,7 +304,7 @@
  	}
  	if (set_wcache) {
  		__u8 flushcache1[4] = {ATA_OP_FLUSHCACHE,0,0,0};
-@@ -1009,11 +1057,16 @@
+@@ -1013,11 +1061,16 @@
  		}
  		if (!wcache && do_drive_cmd(fd, flushcache1))
  			perror (" HDIO_DRIVE_CMD(flushcache1) failed");
@@ -324,7 +324,7 @@
  	}
  	if (set_standbynow) {
  		__u8 args1[4] = {ATA_OP_STANDBYNOW1,0,0,0};
-@@ -1021,8 +1074,10 @@
+@@ -1025,8 +1078,10 @@
  		if (get_standbynow)
  			printf(" issuing standby command\n");
  		if (do_drive_cmd(fd, args1)
@@ -336,7 +336,7 @@
  	}
  	if (set_sleepnow) {
  		__u8 args1[4] = {ATA_OP_SLEEPNOW1,0,0,0};
-@@ -1030,8 +1085,10 @@
+@@ -1034,8 +1089,10 @@
  		if (get_sleepnow)
  			printf(" issuing sleep command\n");
  		if (do_drive_cmd(fd, args1)
@@ -348,7 +348,7 @@
  	}
  	if (set_security) {
  		do_set_security(fd);
-@@ -1039,15 +1096,19 @@
+@@ -1043,15 +1100,19 @@
  	if (set_freeze) {
  		__u8 args[4] = {ATA_OP_SECURITY_FREEZE_LOCK,0,0,0};
  		printf(" issuing Security Freeze command\n");
@@ -370,7 +370,7 @@
  	}
  	if (set_standby) {
  		__u8 args[4] = {ATA_OP_SETIDLE1,standby,0,0};
-@@ -1055,14 +1116,18 @@
+@@ -1059,14 +1120,18 @@
  			printf(" setting standby to %u", standby);
  			interpret_standby();
  		}
@@ -389,9 +389,9 @@
  			perror(" HDIO_SET_BUSSTATE failed");
 +		}
  	}
- 	if (get_hitachi_temp) {
- 		__u8 args[4] = {0xf0,0,0x01,0}; /* "Sense Condition", vendor-specific */
-@@ -1104,12 +1169,18 @@
+ 	if (do_drq_hsm_error) {
+ 		id = get_identify_data(fd, id);
+@@ -1122,12 +1187,18 @@
  					break;
  				default:printf("\?\?\?)\n");
  			}
@@ -410,7 +410,7 @@
  		}
  	}
  
-@@ -1120,6 +1191,9 @@
+@@ -1138,6 +1209,9 @@
  				printf(" (DMA-Assisted-PIO)\n");
  			else
  				on_off(parm);
@@ -420,7 +420,7 @@
  		}
  	}
  	if (get_dma_q) {
-@@ -1134,28 +1208,34 @@
+@@ -1152,28 +1226,34 @@
  		if (0 == ioctl(fd, HDIO_GET_KEEPSETTINGS, &parm)) {
  			printf(" keepsettings  = %2ld", parm);
  			on_off(parm);
@@ -461,7 +461,7 @@
  			printf(" readahead     = %2ld", parm);
  			on_off(parm);
  		}
-@@ -1170,12 +1250,13 @@
+@@ -1188,12 +1268,13 @@
  		static struct hd_geometry g;
  		static struct local_hd_big_geometry bg;
  
@@ -478,15 +478,20 @@
  				printf(msg, g.cylinders, g.heads, g.sectors, blksize, g.start);
  		}
  	}
-@@ -1185,6 +1266,7 @@
+@@ -1202,9 +1283,10 @@
+ 		const char *state;
  		if (do_drive_cmd(fd, args)
  		 && (args[0] = ATA_OP_CHECKPOWERMODE2) /* (single =) try again with 0x98 */
- 		 && do_drive_cmd(fd, args)) {
+-		 && do_drive_cmd(fd, args))
++		 && do_drive_cmd(fd, args)) {
 +			err = errno;
- 			if (errno != EIO || args[0] != 0 || args[1] != 0)
- 				state = "unknown";
- 			else
-@@ -1205,8 +1287,10 @@
+ 			state = "unknown";
+-		else
++		} else
+ 			state = (args[2] == 255) ? "active/idle" : "standby";
+ 		printf(" drive state is:  %s\n", state);
+ 	}
+@@ -1219,8 +1301,10 @@
  			dump_identity(id2);
  		} else if (errno == -ENOMSG)
  			printf(" no identification info available\n");
@@ -498,7 +503,7 @@
  	}
  	if (do_IDentity) {
  		id = get_identify_data(fd, id);
-@@ -1259,39 +1343,46 @@
+@@ -1273,39 +1357,46 @@
  		}
  	}
  	if (get_busstate) {
diff --git a/hdparm-7.1.tar.bz2 b/hdparm-7.1.tar.bz2
deleted file mode 100644
index 3985133..0000000
--- a/hdparm-7.1.tar.bz2
+++ /dev/null
@@ -1,3 +0,0 @@
-version https://git-lfs.github.com/spec/v1
-oid sha256:03ba38f464ad1be1f3574ea2d0893d1aaef9251fc35e383756a20d4d835ff8a9
-size 55061
diff --git a/hdparm-7.2.tar.bz2 b/hdparm-7.2.tar.bz2
new file mode 100644
index 0000000..e70530b
--- /dev/null
+++ b/hdparm-7.2.tar.bz2
@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:0f283ac9ca09900c2b907a3a4dd3c296daa9e89853d385423420ab5b3044ac58
+size 55285
diff --git a/hdparm.changes b/hdparm.changes
index 6749812..24d8016 100644
--- a/hdparm.changes
+++ b/hdparm.changes
@@ -1,3 +1,12 @@
+-------------------------------------------------------------------
+Sun Apr 29 21:57:26 CEST 2007 - ro@suse.de
+
+- update to 7.2
+  - tweak -C
+  - added more debug info from --verbose
+  - added --drq-hsm-error to test libata EH (VERY DANGEROUS, do not use)
+  - fixed breakage when used with old IDE driver
+
 -------------------------------------------------------------------
 Sun Apr 29 11:50:34 CEST 2007 - ro@suse.de
 
diff --git a/hdparm.spec b/hdparm.spec
index e40f3bf..cadeb42 100644
--- a/hdparm.spec
+++ b/hdparm.spec
@@ -1,5 +1,5 @@
 #
-# spec file for package hdparm (Version 7.1)
+# spec file for package hdparm (Version 7.2)
 #
 # Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
 # This file and all modifications and additions to the pristine
@@ -16,7 +16,7 @@ Group:          Hardware/Other
 PreReq:         %insserv_prereq %fillup_prereq coreutils
 Provides:       base:/sbin/hdparm
 Autoreqprov:    on
-Version:        7.1
+Version:        7.2
 Release:        1
 Summary:        A Program to Get and Set Hard Disk Parameters
 Source:         hdparm-%{version}.tar.bz2
@@ -103,6 +103,12 @@ fi
 
 %changelog
 * Sun Apr 29 2007 - ro@suse.de
+- update to 7.2
+  - tweak -C
+  - added more debug info from --verbose
+  - added --drq-hsm-error to test libata EH (VERY DANGEROUS, do not use)
+  - fixed breakage when used with old IDE driver
+* Sun Apr 29 2007 - ro@suse.de
 - update to 7.1
   - big-endian fixes for -I, --Istdin, --Istdout
   - cody tidying in sgio.c