pool/hostap-utils
SHA256
4
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8177aa1431
hostap-utils/hostap-utils.changes

515 lines
23 KiB
Plaintext
Raw Normal View History

OBS-URL: https://build.opensuse.org/package/show/openSUSE:Factory/hostap-utils?expand=0&rev=1
2007-03-19 04:30:49 +01:00
-------------------------------------------------------------------
Wed Mar 14 14:59:13 CET 2007 - jg@suse.de
- split hostap-utils off into own package
-------------------------------------------------------------------
Mon Sep 18 14:13:31 CEST 2006 - jg@suse.de
- hostap-utils: Fixed usage of uninitialised variable (bug 184410)
- hostapd: Update to version 0.4.9, changes:
* added a new configuration option, eapol_version, that can be
used to set EAPOL version to 1 (default is 2) to work around
broken client implementations that drop EAPOL frames which use
version number 2 [Bug 89]
* fixed EAP-MSCHAPv2 message length validation
* fixed stdarg use in hostapd_logger(): if both stdout and syslog
logging was enabled, hostapd could trigger a segmentation fault
in vsyslog on some CPU -- C library combinations
-------------------------------------------------------------------
Sun Feb 5 19:37:30 CET 2006 - ro@suse.de
- use madwifi-devel in BuildRequires
-------------------------------------------------------------------
Sun Feb 5 17:09:48 CET 2006 - aj@suse.de
- Remove BuildRequires on km_wlan.
-------------------------------------------------------------------
Wed Jan 25 21:36:28 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Mon Nov 21 14:00:48 CET 2005 - jg@suse.de
- hostapd: update to 0.4.7, changes:
* driver_wired: fixed EAPOL sending to optionally use PAE group
address as the destination instead of supplicant MAC address
* driver_madwifi: configure driver to use TKIP countermeasures in
order to get correct behavior
* driver_madwifi: added support for madwifi-ng
- hostapd: remove obsolete madwifi patch
- hostapd: updated config file
- hostap-utils: update to 0.4.7 (no changes)
- use %{jobs}
-------------------------------------------------------------------
Tue Nov 8 15:28:33 CET 2005 - jg@suse.de
- do not build as root
-------------------------------------------------------------------
Fri Nov 4 17:51:44 CET 2005 - jg@suse.de
- hostapd, update to 0.4.6, changes:
* added support for replacing user identity from EAP with RADIUS
User-Name attribute from Access-Accept message, if that is included,
for the RADIUS accounting messages (e.g., for EAP-PEAP/TTLS to get
tunneled identity into accounting messages when the RADIUS server
does not support better way of doing this with Class attribute)
* driver_madwifi: fixed EAPOL packet receive for configuration where
ath# is part of a bridge interface
* added a configuration file and log analyzer script for logwatch
* fixed EAPOL state machine step function to process all state
transitions before processing new events; this resolves a race
condition in which EAPOL-Start message could trigger hostapd to send
two EAP-Response/Identity frames to the authentication server
- hostapd: added support for madwifi-ng
- removed hostap-driver, is part of the kernel now
-------------------------------------------------------------------
Thu Oct 13 16:29:17 CEST 2005 - jg@suse.de
- hostapd: update to 0.4.5, changes (shortened):
* added client CA list to the TLS certificate request in order to
make it easier for the client to select which certificate to use
* added experimental support for EAP-PSK
* added support for WE-19 (hostap, madwifi)
* fixed PMKSA caching to copy User-Name and Class attributes so
that RADIUS accounting gets correct information
* start RADIUS accounting only after successful completion of WPA
4-Way Handshake if WPA-PSK is used
* fixed PMKSA caching for the case where
* EAP-PAX is now registered as EAP type 46
* fixed EAP-PAX MAC calculation
* fixed EAP-PAX CK and ICK key derivation
- hostap-driver: update to 0.4.5, changes:
* added support for WE-19
- hostap-utils: update to 0.4.0 (no real changes)
-------------------------------------------------------------------
Thu Sep 8 16:41:41 CEST 2005 - jg@suse.de
- fixed file permissions
-------------------------------------------------------------------
Mon Aug 22 15:21:31 CEST 2005 - jg@suse.de
- hostap-driver: update to 0.4.4, changes:
* added support for pcmcia changes in Linux 2.6.13
* added support for creating sysfs device files (Linux 2.6.x)
* fixed power save processing for PS-Poll frames with PwrMgmt flag
set (this was causing "wifi0: invalid skb->cb magic" errors)
* fixed linking both hostap_cs and hostap_pci to kernel
* filter out sequential disconnect events to make race condition with
received EAPOL frames less likely to happen (this improves
authentication success rate with some APs that send EAPOL frames
very quickly after the (re)association response)
* added support for setting channel mask for scan requests
-------------------------------------------------------------------
Sun Aug 7 22:13:32 CEST 2005 - ro@suse.de
- fix build with current wireless drivers
-------------------------------------------------------------------
Mon Jul 11 16:34:25 CEST 2005 - jg@suse.de
- hostapd: update to 0.3.9, changes:
* fixed a bug which caused some RSN pre-authentication cases to
use freed memory and potentially crash hostapd
* fixed private key loading for cases where passphrase is not set
* fixed WPA2 to add PMKSA cache entry when using integrated EAP
authenticator
* driver_madwifi: fixed pairwise key removal to allow WPA reauth
without disassociation
* fixed RADIUS attribute Class processing to only use
Access-Accept packets to update Class; previously, other RADIUS
authentication packets could have cleared Class attribute
* fixed PMKSA caching (EAP authentication was not skipped correctly
with the new state machine changes from IEEE 802.1X draft)
- hostap-driver: update to 0.3.9, changes:
* fixed background scans (iwlist wlan0 scan) not to break data
connection when in host_roaming 2 mode
* fixed beacon frame when moving from monitor mode to master mode
-------------------------------------------------------------------
Wed Jun 8 08:23:34 CEST 2005 - meissner@suse.de
- adjust hostapd/Makefile to be able to correctly
get passed RPM_OPT_FLAGS.
-------------------------------------------------------------------
Wed Jun 8 00:09:10 CEST 2005 - meissner@suse.de
- Use RPM_OPT_FLAGS.
-------------------------------------------------------------------
Fri Mar 11 14:36:44 CET 2005 - jg@suse.de
- hostap-driver:
* create sysfs links for ethernet device, not IEEE80211 device
* disabled sysfs links for hostap_cs, as it breaks association
-------------------------------------------------------------------
Thu Feb 24 15:28:31 CET 2005 - jg@suse.de
- hostap-driver: fixed sysfs support
-------------------------------------------------------------------
Mon Feb 14 10:11:51 CET 2005 - jg@suse.de
- hostapd, hostap-utils, hostap-driver: update to 0.3.7 final
(no real changes, just version rename)
-------------------------------------------------------------------
Mon Feb 7 21:11:32 CET 2005 - jg@suse.de
- disabled support for madwifi on non x86(-64) platforms
-------------------------------------------------------------------
Mon Feb 7 14:43:27 CET 2005 - jg@suse.de
- hostapd: update to version 0.3.7-pre, changes (shortened):
* added support for configuring a forced PEAP version based on
the Phase 1 identity
* fixed PEAPv1 to use tunneled EAP-Success/Failure instead of
EAP-TLV to terminate authentication
* driver_madwifi: filter wireless events based on ifindex to
allow more than one network interface to be used
* added support for configuring multiple allowed EAP types for
Phase 2 authentication (EAP-PEAP, EAP-TTLS)
* added support for EAP-PEAP in the integrated EAP authenticator
* added support for EAP-GTC in the integrated EAP authenticator
* added support for configuring list of EAP methods for Phase 1
so that the integrated EAP authenticator can, e.g., use the
wildcard entry for EAP-TLS and EAP-PEAP
* added support for EAP-TTLS in the integrated EAP authenticator
* added support for EAP-SIM in the integrated EAP authenticator
* added support for using hostapd as a RADIUS authentication
server with the integrated EAP authenticator taking care of
EAP authentication
* driver_madwifi: fixed group key setup and added get_ssid method
* added support for EAP-MSCHAPv2 in the integrated EAP
authenticator
* added support for integrated EAP-TLS authentication
* added support for reading PKCS#12 (PFX) files (as a replacement
for PEM/DER) to get certificate and private key (CONFIG_PKCS12)
* added support for Acct-{Input,Output}-Gigawords
* added support for Event-Timestamp (in RADIUS Accounting-Requests)
* added support for RADIUS Authentication Client MIB (RFC2618)
* added support for RADIUS Accounting Client MIB (RFC2620)
* made EAP re-authentication period configurable
* fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication
* added support for multiple WPA pre-shared keys
* added support for multiple driver interfaces to allow hostapd
to be used with other drivers
* added wired authenticator driver interface
* added madwifi driver interface
* fixed RADIUS reconnection after an error in sending interim
accounting packets
* added hostapd control interface for external programs
* finished update from IEEE 802.1X-2001 to IEEE 802.1X-REV
(now d11)
* added support for strict GTK rekeying
* added Prism54 driver interface
* dual-licensed hostapd (GPLv2 and BSD licenses)
* added integrated EAP authenticator that can be used instead of
external RADIUS authentication server
- hostap-driver: update to version 0.3.7-pre, changes:
* improved suspend operation: disable firmware (hostap_cs) and
generate disconnect event to trigger wpa_supplicant to
reassociate immediately after resume
* added new ioctl command for hostapd to clear station specific
accounting data when starting a new accounting session
* added support for the special initialization needed for the
wireless part of multi-function SanDisk ConnectPlus CF cards
(manfid 0xd601, 0x0101)
* fixed card enabling after firmware download in case any of the
netdevs were up when the download was started
* added support for Linux wireless extension v17
- hostap-utils: update to version 0.3.7-pre (no changes)
- added all example configuration files
-------------------------------------------------------------------
Thu Jan 13 12:26:34 CET 2005 - jg@suse.de
- hostapd: update to version 0.2.6, changes:
* fixed RADIUS accounting to generate a new session id for cases
where a station reassociates without first being complete
deauthenticated
* fixed STA disassociation handler to mark next timeout state to
deauthenticate the station, i.e., skip long wait for inactivity
poll and extra disassociation, if the STA disassociates without
deauthenticating
* removed 'daemonize' configuration file option since it has not
really been used at all for more than year
- hostap-utils: update to version 0.2.6, changes:
* split_combined_hex: updated to use head/tail -n argument
- hostap-driver: update to version 0.2.6, changes:
* added support for changed PCI API in Linux 2.6.10-rc1 and newer
-------------------------------------------------------------------
Tue Nov 2 17:53:18 CET 2004 - jg@suse.de
- hostapd: update to version 0.2.5, changes:
* fixed EAPOL reauthentication to trigger WPA/WPA2
reauthentication
* fixed EAPOL state machine to stop if STA is removed during
eapol_sm_step(); this fixes at least one segfault triggering
bug with IEEE 802.11i pre-authentication
* fixed an alignment issue that could cause SHA-1 to fail on some
platforms (e.g., Intel ixp425 with a compiler that does not
32-bit align variables)
* fixed RADIUS reconnection after an error in sending interim
accounting packets
- hostap-driver: update to version 0.2.5, changes:
* fixed card enabling after firmware download in case any of the
netdevs were up when the download was started
* fixed netif_carrier_on/off() calls to leave carrier on for
Master mode; previously this may have been left off in some
cases which could prevent packet bridging with new kernel
versions
- hostap-driver: enabled support for non-volatile firmware download
-------------------------------------------------------------------
Fri Oct 1 18:13:12 CEST 2004 - jg@suse.de
- fixed sysfs device/driver links (bug 46633)
-------------------------------------------------------------------
Mon Aug 9 09:35:05 CEST 2004 - jg@suse.de
- fixed filelist
-------------------------------------------------------------------
Fri Aug 6 15:09:06 CEST 2004 - jg@suse.de
- do not install /etc/pcmcia/hostap_cs.conf.example anymore
-------------------------------------------------------------------
Thu Jul 29 19:51:55 CEST 2004 - jg@suse.de
- update hostapd to 0.2.4:
* fixed some accounting cases where Accounting-Start was sent
when IEEE 802.1X port was being deauthorized
* modified RADIUS client to re-connect the socket in case of
certain error codes that are generated when a network
interface state is changes (e.g., when IP address changes or
the interface is set UP)
* fixed couple of cases where EAPOL state for a station was freed
twice causing a segfault for hostapd
* fixed couple of bugs in processing WPA deauthentication
* fixed WPA/WPA2 group rekeying to use key index correctly (GN/GM)
* fixed group rekeying to send zero TSC in EAPOL-Key messages to
fix cases where STAs dropped multicast frames as replay attacks
* added support for copying RADIUS Attribute 'Class' from
authentication messages into accounting messages
* send canned EAP failure if RADIUS server sends Access-Reject
without EAP message (previously, Supplicant was not notified
in this case)
* fixed mixed WPA-PSK and WPA-EAP mode to work with WPA-PSK
- update hostap-utils to 0.2.4 (no changes)
- update hostap-driver to 0.2.4:
* fixed wlan#/wifi# interface packet counters (both are supposed
to see data packets once; wlan# was counting TX twice and wifi#
did not count TX or RX at all for most cases)
* fixed compilation with PRISM2_NO_STATION_MODES defined
* fixed MAC address changing to update address for wifi# interface
(without this, at least Master mode did not work correctly when
MAC address was changed for wlan#)
* fixed inner-BSS bridge (ap_bridge_packets=1) not to bridge
packets to unauthorized ports when IEEE 802.1X/WPA is used
* merged CryptoAPI versions of WEP/TKIP/CCMP from the wireless-2.6
BitKeeper tree (not used by default, can be enabled by defining
HOSTAP_USE_CRYPTO_API)
* fixed a buffer overflow in TKIP encryption (hostap_crypt_tkip
module) on big endian hosts
-------------------------------------------------------------------
Mon May 17 18:15:57 CEST 2004 - jg@suse.de
- update hostapd to 0.2.1 (shortened):
* added WPA and IEEE 802.11i/RSN (WPA2) Authenticator
functionality
* added support for Acct-Interim-Interval
* added new hostapd.conf variable, nas_identifier, that can be
used to add an optional RADIUS Attribute, NAS-Identifier, into
authentication and accounting messages
* added support for Accounting-On and Accounting-Off messages
- update hostap-utils to 0.2.1:
* hostap_rid: fixed handling of failed RID reads
* fixed prism2_srec not to allow combination of volatile and
non-volatile firmware images (they will corrupt the card flash)
* added support for loading PRI firmware for cards without PRI
* fixed volatile download of combined primary and secondary
firmware to start running the secondary firmware
* added support for dumping PDA in text format and overriding PDA
with text and binary files (prism2_srec options -D, -P, and -O)
- update hostap-driver to 0.2.1 (shortened):
* allow hostapd to send encrypted frames using wlan#ap interface
* added driver support for hostapd WPA Authenticator
* fixed TKIP get sequence number
* clear IFF_RUNNING and generate linkwatch events based on
association status in Managed mode
* added alternative TKIP implementation which uses Michael MIC
implementation in CryptoAPI instead of Host AP specific
implementation
* added support for RSN (IEEE 802.11i/WPA2)
* dropped support for Linux 2.2.x and old Linux 2.4.x kernels
* fixed hostap_cs unregistration when PC Card is removed while
Host AP interfaces are still up
* restructured Linux net device use to be more like IEEE 802.1q
VLAN
* disable wlan hardware when radio netdev (wifi#) is down
* fixed Shared Key authentication when using host_decrypt and
kernel driver based IEEE 802.11 management
* added crypto hooks for full MSDU encrypt/decrypt
* fixed iwspy support with Linux wireless ext v16
* fixed IEEE 802.11 defragmentation when using host-based WEP
decryption and bridging packets between two associated STAs
* added driver support for WPA Authenticator/Supplicant
* added minimal support for ethtool
- fixed bug in hostap-driver Makefile which prevented hostap_cs.ko
from being built
-------------------------------------------------------------------
Sat Apr 3 17:39:13 CEST 2004 - jg@suse.de
- fixed sysfs support in hostap driver (bug #37278)
-------------------------------------------------------------------
Tue Mar 30 11:09:31 CEST 2004 - jg@suse.de
- skipping build for UM kernels (bug #37448)
- skipping build of hostap_cs in case PCMCIA is disabled in the
kernel config (also bug #37448)
-------------------------------------------------------------------
Tue Mar 2 08:20:38 CET 2004 - jg@suse.de
- typo fix in makefile
-------------------------------------------------------------------
Sun Feb 29 12:28:30 CET 2004 - jg@suse.de
- update to hostapd-0.1.3, changes:
* fixed event loop to call signal handlers only after returning from
the real signal handler
* reset sta->timeout_next after successful association to make sure
that the previously registered inactivity timer will not remove the
STA immediately (e.g., if STA deauthenticates and re-associates
before the timer is triggered).
- update to hostap-driver-0.1.3, changes:
* fixed IEEE 802.11 defragmentation when using host-based WEP
decryption and bridging packets between two associated STAs
(this caused a kernel crash in dev_queue_xmit())
* reconfigure fragmentation threshold after Port0 enable to work around
issues with some STA firmware versions forgetting the configured
value
* restore retry limit after card reset
* update STA RX statistics also in Repeater mode
* hostap_cs: fixed CS reset when the netdev is down: need to reset
hardware even in this case to make resume from suspend mode work
correctly
* fixed error reporting from Genesis mode download
* changed README to use 'make' instead of 'make pccard/pci/plx' when
building the driver
* replaced CardServices() calls with calls to matching pcmcia_*()
functions (required for Linux 2.6.2 and newer)
* fixed module reference counting of hostap_crypt_wep module for
Linux 2.6.x (i.e., prevent it from be unloaded if it is still used)
- update to hostap-utils-0.1.3, changes:
* prism2_srec: ignore PDR 0x0413 if it is not used (this allows some
of the newer STA firmware 1.8.x versions to be downloaded)
* prism2_srec: fixed combined RAM download of PRI and STA firmwares
to use correct start address
- added driver race condition fix from hostap CVS
- rewrote driver Makefile
-------------------------------------------------------------------
Mon Jan 26 15:01:49 CET 2004 - jg@suse.de
- removed kernel-source from neededforbuild
-------------------------------------------------------------------
Fri Jan 9 18:44:30 CET 2004 - jg@suse.de
- driver update to version 0.1.2, from ChangeLog
* fixed RTS and Fragmentation thresholds after hw reset
* fixed Managed/Ad-hoc mode authentication with Open System
algorithm when using old (e.g., version 0.6.2) STA firmware
* fixed iwspy support with Linux wireless ext v16
* fixed WDS interface selection to not select non-WDS interface
* fixed wlan#wds#, wlan#ap, and wlan#sta netdevice unregistration
* added PCI ID for Prism3 mini-PCI [hostap_pci]
* fixed yield() backward compatibility code for Linux 2.4.0-18
* added support for 32-bit CommTallies (if STA f/w >= 0.8.2)
* update counters used for /proc/net/hostap/wlan#/stats periodically
* fixed CommTallies handling on big endian platforms
* added support for Primary-only mode
* fixed failure handling in PCI probe not to crash kernel [hostap_pci]
* merged hostap_crypt module into hostap module
* fixed inactivity polling of stations that are in power saving mode
- utils update to version 0.1.2, from ChangeLog
* fixed prism2_srec not to allow combination of volatile and
non-volatile firmware images (they will corrupt the card flash)
* reduced verbosity of prism2_srec
* added support for volatile download of Primary firmware using
Genesis mode (this is available only for hfa3842; hfa3841, i.e., old
Prism2 cards, require hardware changes for similar function)
('-g' command line option in prism2_srec)
* added support for merging two srec file (Primary and Secondary(STA)
firmware) into one non-volatile (flash) download
- hostapd update to version 0.1.0
-------------------------------------------------------------------
Mon Sep 8 18:35:40 CEST 2003 - agruen@suse.de
- km_hostap-HZ.diff: Adapt to dynamic-hz kernel patch.
-------------------------------------------------------------------
Mon Jul 28 16:52:09 CEST 2003 - jg@suse.de
- update to version 0.0.4, from ChangeLog (shortened)
* moved non-hardware specific RX code from hostap_hw.c into a new file,
hostap_80211_rx.c and removed Prism2 RX descriptor dependency from
hostap_ap.c
* fixed number of compilation issues (RH9 kernel, *.mod files to local
directory, 2.4.x compilation with CONFIG_MODVERSIONS, external
pcmcia-cs)
* removed extra tasklet that was used with TX callback handler
* update basic rate set automaticallyt when changing supported rate set
* fixed compilation without Linux Wireless Extensions
* use less aggressive transmit rate decreasing algorithm
* fixed inactivity expiration of stations using power saving mode
* fixed sending of IEEE 802.1X frames to buffer them if STA is in power
saving mode
* removed backward compatibility code for Linux Wireless Extensions
versions older than ver 9
* added module parameter 'dev_template' for setting the device name
template (default: 'wlan%d'); this is for hostap_{cs,pci,plx}.o
* changed monitor mode to use pseudo-IBSS mode instead of Host AP mode
to avoid sending out Beacon and ProbeResp frames
* fixed enh_sec setting (hide SSID) to reset Port0 so that the changes
to the beacon are taken into use immediately
* added support for selection which authentication algorithm to use
in station mode
* added support for manual scan and roaming mode (managed/ad-hoc);
* process beacon frames in kernel driver even when hostapd is used
* removed TX power controlling (iwconfig txpower)
-------------------------------------------------------------------
Tue Jun 17 10:06:30 CEST 2003 - jg@suse.de
- added directory /usr/src/kernel-modules to filelist
-------------------------------------------------------------------
Wed Jun 4 13:25:28 CEST 2003 - jg@suse.de
- Initial package
Reference in New Issue Copy Permalink