diff --git a/hostapd/defconfig b/hostapd/defconfig
index 77a894d..8ccb8cb 100644
--- a/hostapd/defconfig
+++ b/hostapd/defconfig
@@ -42,7 +42,7 @@ CONFIG_LIBNL32=y
 #LIBS_c += -L/usr/local/lib
 
 # Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
+CONFIG_DRIVER_NONE=y
 
 # IEEE 802.11F/IAPP
 CONFIG_IAPP=y
@@ -78,31 +78,31 @@ CONFIG_EAP_GTC=y
 CONFIG_EAP_TTLS=y
 
 # EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
+CONFIG_EAP_SIM=y
 
 # EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
+CONFIG_EAP_AKA=y
 
 # EAP-AKA' for the integrated EAP server
 # This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
+CONFIG_EAP_AKA_PRIME=y
 
 # EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
+CONFIG_EAP_PAX=y
 
 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
+CONFIG_EAP_PSK=y
 
 # EAP-pwd for the integrated EAP server (secure authentication with a password)
-#CONFIG_EAP_PWD=y
+CONFIG_EAP_PWD=y
 
 # EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
+CONFIG_EAP_SAKE=y
 
 # EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
+CONFIG_EAP_GPSK=y
 # Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
+CONFIG_EAP_GPSK_SHA256=y
 
 # EAP-FAST for the integrated EAP server
 # Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
@@ -111,20 +111,20 @@ CONFIG_EAP_TTLS=y
 #CONFIG_EAP_FAST=y
 
 # Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
+CONFIG_WPS=y
 # Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
+CONFIG_WPS_UPNP=y
 # Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
+CONFIG_WPS_NFC=y
 
 # EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
+CONFIG_EAP_IKEV2=y
 
 # Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
+CONFIG_EAP_TNC=y
 
 # EAP-EKE for the integrated EAP server
-#CONFIG_EAP_EKE=y
+CONFIG_EAP_EKE=y
 
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
@@ -138,21 +138,21 @@ CONFIG_PKCS12=y
 CONFIG_IPV6=y
 
 # IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
+CONFIG_IEEE80211R=y
 
 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
 # the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
+CONFIG_DRIVER_RADIUS_ACL=y
 
 # IEEE 802.11n (High Throughput) support
-#CONFIG_IEEE80211N=y
+CONFIG_IEEE80211N=y
 
 # Wireless Network Management (IEEE Std 802.11v-2011)
 # Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
+CONFIG_WNM=y
 
 # IEEE 802.11ac (Very High Throughput) support
-#CONFIG_IEEE80211AC=y
+CONFIG_IEEE80211AC=y
 
 # IEEE 802.11ax HE support
 # Note: This is experimental and work in progress. The definitions are still
@@ -189,11 +189,11 @@ CONFIG_IPV6=y
 
 # Enable support for fully dynamic VLANs. This enables hostapd to
 # automatically create bridge and VLAN interfaces if necessary.
-#CONFIG_FULL_DYNAMIC_VLAN=y
+CONFIG_FULL_DYNAMIC_VLAN=y
 
 # Use netlink-based kernel API for VLAN operations instead of ioctl()
 # Note: This requires libnl 3.1 or newer.
-#CONFIG_VLAN_NETLINK=y
+CONFIG_VLAN_NETLINK=y
 
 # Remove support for dumping internal state through control interface commands
 # This can be used to reduce binary size at the cost of disabling a debugging
@@ -264,16 +264,16 @@ CONFIG_IPV6=y
 # internal = Internal TLSv1 implementation (experimental)
 # linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
 # none = Empty template
-#CONFIG_TLS=openssl
+CONFIG_TLS=openssl
 
 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
 # can be enabled to get a stronger construction of messages when block ciphers
 # are used.
-#CONFIG_TLSV11=y
+CONFIG_TLSV11=y
 
 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
 # can be enabled to enable use of stronger crypto algorithms.
-#CONFIG_TLSV12=y
+CONFIG_TLSV12=y
 
 # Select which ciphers to use by default with OpenSSL if the user does not
 # specify them.
@@ -298,19 +298,19 @@ CONFIG_IPV6=y
 # Interworking (IEEE 802.11u)
 # This can be used to enable functionality to improve interworking with
 # external networks.
-#CONFIG_INTERWORKING=y
+CONFIG_INTERWORKING=y
 
 # Hotspot 2.0
-#CONFIG_HS20=y
+CONFIG_HS20=y
 
 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
-#CONFIG_SQLITE=y
+CONFIG_SQLITE=y
 
 # Enable Fast Session Transfer (FST)
-#CONFIG_FST=y
+CONFIG_FST=y
 
 # Enable CLI commands for FST testing
-#CONFIG_FST_TEST=y
+CONFIG_FST_TEST=y
 
 # Testing options
 # This can be used to enable some testing options (see also the example
@@ -342,12 +342,12 @@ CONFIG_IPV6=y
 # For more details refer to:
 # http://wireless.kernel.org/en/users/Documentation/acs
 #
-#CONFIG_ACS=y
+CONFIG_ACS=y
 
 # Multiband Operation support
 # These extentions facilitate efficient use of multiple frequency bands
 # available to the AP and the devices that may associate with it.
-#CONFIG_MBO=y
+CONFIG_MBO=y
 
 # Client Taxonomy
 # Has the AP retain the Probe Request and (Re)Association Request frames from