b5f2ba9c14
version upgrade to 3.13.10 OBS-URL: https://build.opensuse.org/request/show/203652 OBS-URL: https://build.opensuse.org/package/show/Printing/hplip?expand=0&rev=83
58 lines
3.7 KiB
Diff
58 lines
3.7 KiB
Diff
--- data/rules/56-hpmud.rules.change-udev-rules.orig 2013-10-11 11:38:53.000000000 +0200
|
|
+++ data/rules/56-hpmud.rules 2013-10-16 16:04:54.000000000 +0200
|
|
@@ -1,18 +1,43 @@
|
|
# HPLIP udev rules file. Notify console user if plugin support is required for this device.
|
|
|
|
+# SUSE changed:
|
|
+#
|
|
+# Exchanged the rule to GOTO hpmud_usb_rules if SUBSYSTEM is "usb"
|
|
+# with the rule if SUBSYSTEM is "ppdev" to avoid that the "ppdev" rule
|
|
+# is needlessly processed when SUBSYSTEM is "usb".
|
|
+#
|
|
+# Added GOTO hpmud_rules_end rule to skip the hpmud_usb_rules
|
|
+# if SUBSYSTEM is not "usb" or if ENV{DEVTYPE} is not "usb_device" or if SUBSYSTEM is not "ppdev"
|
|
+# to avoid that the hpmud_usb_rules are needlessly processed.
|
|
+#
|
|
+# The rule to automatically "add the printer and install plugin" is disabled
|
|
+# because automated installation of non-free proprietary third-party software
|
|
+# (here the plugin from HP) should not happen and it can cause whatever kind
|
|
+# of strange behaviour see for example https://bugs.launchpad.net/bugs/1197416
|
|
+# and https://bugs.launchpad.net/bugs/1221348
|
|
+# while in contrast manual printer setup via hp-setup usually "just works"
|
|
+# and it is clear for the user what goes on and in case of failure what went wrong.
|
|
+#
|
|
+# Because the rule to automatically "add the printer and install plugin"
|
|
+# is also used to upload firmware into printers that need it
|
|
+# see https://bugs.launchpad.net/bugs/1220628
|
|
+# a rule that only uploads firmware into printers that need it is added.
|
|
+
|
|
ACTION!="add", GOTO="hpmud_rules_end"
|
|
-SUBSYSTEM=="ppdev", OWNER="root", GROUP="lp", MODE="0664"
|
|
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", GOTO="hpmud_usb_rules"
|
|
-
|
|
+SUBSYSTEM=="ppdev", OWNER="root", GROUP="lp", MODE="0664"
|
|
+GOTO="hpmud_rules_end"
|
|
|
|
LABEL="hpmud_usb_rules"
|
|
|
|
# ENV{ID_HPLIP}="1" is for Ubuntu udev-acl
|
|
ATTR{idVendor}=="03f0", ATTR{idProduct}=="????", OWNER="root", GROUP="lp", MODE="0664", ENV{sane_hpaio}="yes", ENV{libsane_matched}="yes", ENV{hp_test}="yes", ENV{ID_HPLIP}="1"
|
|
|
|
-
|
|
# This rule will add the printer and install plugin
|
|
-ENV{hp_test}=="yes", PROGRAM="/bin/sh -c 'logger -p user.info loading HP Device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c 'if [ -f /usr/bin/systemctl ]; then /usr/bin/systemctl --no-block start hplip-printer@$env{BUSNUM}:$env{DEVNUM}.service; else /usr/bin/nohup /usr/bin/hp-config_usb_printer $env{BUSNUM}:$env{DEVNUM} ; fi'"
|
|
+# ENV{hp_test}=="yes", PROGRAM="/bin/sh -c 'logger -p user.info loading HP Device $env{BUSNUM} $env{DEVNUM}'", RUN+="/bin/sh -c 'if [ -f /usr/bin/systemctl ]; then /usr/bin/systemctl --no-block start hplip-printer@$env{BUSNUM}:$env{DEVNUM}.service; else /usr/bin/nohup /usr/bin/hp-config_usb_printer $env{BUSNUM}:$env{DEVNUM} ; fi'"
|
|
+
|
|
+# This rule uploads firmware to HP USB printer devices if needed:
|
|
+ENV{hp_test}=="yes", PROGRAM="/bin/logger -p user.info udev hpmud.rules runs hp-firmware to test if HP device with USB vendor ID $attr{idVendor} and USB product ID $attr{idProduct} at USB bus ID $env{BUSNUM} and USB device ID $env{DEVNUM} needs firmware and if yes to upload it", RUN+="/usr/bin/hp-firmware -s $env{BUSNUM}:$env{DEVNUM}"
|
|
|
|
# If sane-bankends is installed add hpaio backend support to dll.conf if needed.
|
|
ENV{sane_hpaio}=="yes", RUN+="/bin/sh -c 'grep -q ^#hpaio /etc/sane.d/dll.conf;if [ $$? -eq 0 ];then sed -i -e s/^#hpaio/hpaio/ /etc/sane.d/dll.conf;else grep -q ^hpaio /etc/sane.d/dll.conf;if [ $$? -ne 0 ];then echo hpaio >>/etc/sane.d/dll.conf;fi;fi'"
|
|
@@ -20,5 +45,5 @@ ENV{sane_hpaio}=="yes", RUN+="/bin/sh -c
|
|
# The following rule will disable USB autosuspend for the device
|
|
ENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'test -e /sys/$env{DEVPATH}/power/level && echo on > /sys/$env{DEVPATH}/power/level'"
|
|
|
|
-
|
|
LABEL="hpmud_rules_end"
|
|
+
|