diff --git a/hyper-v.changes b/hyper-v.changes
index 4c25cb2..05baef0 100644
--- a/hyper-v.changes
+++ b/hyper-v.changes
@@ -5,6 +5,7 @@ Wed Jul 22 12:12:12 UTC 2020 - ohering@suse.de
   is used in kvp_daemon (bsc#1174443, bsc#1174444)
 - Reopen the devices if read() or write() returns errors (9fc3c01a)
 - Use either python2 or python3 for lsvmbus (bsc#1093910)
+- Remove sysv init scripts
 
 -------------------------------------------------------------------
 Wed Jul 22 09:12:44 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
diff --git a/hyper-v.init.fcopy.sh b/hyper-v.init.fcopy.sh
deleted file mode 100644
index 7650ed6..0000000
--- a/hyper-v.init.fcopy.sh
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/bin/sh
-#
-# LSB compatible service control script; see http://www.linuxbase.org/spec/
-#
-### BEGIN INIT INFO
-# Provides:          hv_fcopy_daemon
-# Required-Start:    $null
-# Should-Start:      $syslog $remote_fs $time
-# Required-Stop:     $null
-# Should-Stop:       $syslog $remote_fs $time
-# Default-Start:     3 5
-# Default-Stop:      0 1 2 6
-# Short-Description: hv_fcopy_daemon receives files from the host
-# Description:       Start hv_fcopy_daemon to allow the host to copy files into this guest
-### END INIT INFO
-
-# Check for missing binaries (stale symlinks should not happen)
-# Note: Special treatment of stop for LSB conformance
-HV_FCOPY_BIN=/usr/sbin/hv_fcopy_daemon
-test -x $HV_FCOPY_BIN || { echo "$HV_FCOPY_BIN not installed"; 
-	if [ "$1" = "stop" ]; then exit 0;
-	else exit 5; fi; }
-
-. /etc/rc.status
-
-# Reset status of this service
-rc_reset
-
-case "$1" in
-    start)
-	echo -n "Starting Hyper-V FCOPY daemon "
-	env PATH=/usr/lib/hyper-v/bin:$PATH \
-	startproc $HV_FCOPY_BIN
-	rc_status -v
-	;;
-    stop)
-	echo -n "Shutting down Hyper-V FCOPY daemon "
-	killproc -TERM $HV_FCOPY_BIN
-	rc_status -v
-	;;
-    try-restart|condrestart)
-	if test "$1" = "condrestart"; then
-		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
-	fi
-	$0 status
-	if test $? = 0; then
-		$0 restart
-	else
-		rc_reset	# Not running is not a failure.
-	fi
-	# Remember status and be quiet
-	rc_status
-	;;
-    restart)
-	## Stop the service and regardless of whether it was
-	## running or not, start it again.
-	$0 stop
-	$0 start
-
-	# Remember status and be quiet
-	rc_status
-	;;
-    force-reload)
-	echo -n "Reload service Hyper-V FCOPY daemon "
-	$0 try-restart
-	rc_status
-	;;
-    reload)
-	rc_failed 3
-	rc_status -v
-	;;
-    status)
-	echo -n "Checking for service Hyper-V FCOPY daemon "
-	checkproc $HV_FCOPY_BIN
-	rc_status -v
-	;;
-    *)
-	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
-	exit 1
-	;;
-esac
-rc_exit
diff --git a/hyper-v.init.sh b/hyper-v.init.sh
deleted file mode 100644
index 7eb31bf..0000000
--- a/hyper-v.init.sh
+++ /dev/null
@@ -1,101 +0,0 @@
-#!/bin/sh
-#
-# LSB compatible service control script; see http://www.linuxbase.org/spec/
-#
-### BEGIN INIT INFO
-# Provides:          hv_kvp_daemon
-# Required-Start:    $null
-# Should-Start:      $syslog $remote_fs $time
-# Required-Stop:     $null
-# Should-Stop:       $syslog $remote_fs $time
-# Default-Start:     3 5
-# Default-Stop:      0 1 2 6
-# Short-Description: hv_kvp_daemon provides info to the host
-# Description:       Start hv_kvp_daemon to allow the host to query this guest
-### END INIT INFO
-
-# Check for missing binaries (stale symlinks should not happen)
-# Note: Special treatment of stop for LSB conformance
-HV_KVP_BIN=/usr/sbin/hv_kvp_daemon
-test -x $HV_KVP_BIN || { echo "$HV_KVP_BIN not installed"; 
-	if [ "$1" = "stop" ]; then exit 0;
-	else exit 5; fi; }
-
-. /etc/rc.status
-
-# Reset status of this service
-rc_reset
-
-case "$1" in
-    start)
-	echo -n "Starting Hyper-V KVP daemon "
-	# The service can not be restarted
-	# IF the currently running kernel is too old, the new daemon is started
-	# anyway. Due to a flaw in the old kernel-user protocol the kernel 
-	# will flood /var/log/messages with messages like:
-	# "hv_utils: KVP: user-mode registering done."
-	# This is also caused by old hyper-v.rpms which have a restart command
-	# in their post install script. Catch those old kernels and avoid the
-	# flood, which will easily fill the root partition during an upgrade.
-	case "`uname -r`" in
-		2.*)      rc_failed 3 ;;
-		3.0.13-*) rc_failed 3 ;;
-		3.0.26-*) rc_failed 3 ;;
-		3.0.31-*) rc_failed 3 ;;
-		3.0.34-*) rc_failed 3 ;;
-		3.0.38-*) rc_failed 3 ;;
-		3.0.42-*) rc_failed 3 ;;
-		*)
-		env PATH=/usr/lib/hyper-v/bin:$PATH \
-		startproc $HV_KVP_BIN
-		;;
-	esac
-	rc_status -v
-	;;
-    stop)
-	echo -n "Shutting down Hyper-V KVP daemon "
-	killproc -TERM $HV_KVP_BIN
-	rc_status -v
-	;;
-    try-restart|condrestart)
-	if test "$1" = "condrestart"; then
-		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
-	fi
-	$0 status
-	if test $? = 0; then
-		$0 restart
-	else
-		rc_reset	# Not running is not a failure.
-	fi
-	# Remember status and be quiet
-	rc_status
-	;;
-    restart)
-	## Stop the service and regardless of whether it was
-	## running or not, start it again.
-	$0 stop
-	$0 start
-
-	# Remember status and be quiet
-	rc_status
-	;;
-    force-reload)
-	echo -n "Reload service Hyper-V KVP daemon "
-	$0 try-restart
-	rc_status
-	;;
-    reload)
-	rc_failed 3
-	rc_status -v
-	;;
-    status)
-	echo -n "Checking for service Hyper-V KVP daemon "
-	checkproc $HV_KVP_BIN
-	rc_status -v
-	;;
-    *)
-	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
-	exit 1
-	;;
-esac
-rc_exit
diff --git a/hyper-v.init.vss.sh b/hyper-v.init.vss.sh
deleted file mode 100644
index a714976..0000000
--- a/hyper-v.init.vss.sh
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/bin/sh
-#
-# LSB compatible service control script; see http://www.linuxbase.org/spec/
-#
-### BEGIN INIT INFO
-# Provides:          hv_vss_daemon
-# Required-Start:    $null
-# Should-Start:      $syslog $remote_fs $time
-# Required-Stop:     $null
-# Should-Stop:       $syslog $remote_fs $time
-# Default-Start:     3 5
-# Default-Stop:      0 1 2 6
-# Short-Description: hv_vss_daemon assists with host initiated backup
-# Description:       Start hv_vss_daemon to allow the host to snapshot this guest
-### END INIT INFO
-
-# Check for missing binaries (stale symlinks should not happen)
-# Note: Special treatment of stop for LSB conformance
-HV_VSS_BIN=/usr/sbin/hv_vss_daemon
-test -x $HV_VSS_BIN || { echo "$HV_VSS_BIN not installed"; 
-	if [ "$1" = "stop" ]; then exit 0;
-	else exit 5; fi; }
-
-. /etc/rc.status
-
-# Reset status of this service
-rc_reset
-
-case "$1" in
-    start)
-	echo -n "Starting Hyper-V VSS daemon "
-	env PATH=/usr/lib/hyper-v/bin:$PATH \
-	startproc $HV_VSS_BIN
-	rc_status -v
-	;;
-    stop)
-	echo -n "Shutting down Hyper-V VSS daemon "
-	killproc -TERM $HV_VSS_BIN
-	rc_status -v
-	;;
-    try-restart|condrestart)
-	if test "$1" = "condrestart"; then
-		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
-	fi
-	$0 status
-	if test $? = 0; then
-		$0 restart
-	else
-		rc_reset	# Not running is not a failure.
-	fi
-	# Remember status and be quiet
-	rc_status
-	;;
-    restart)
-	## Stop the service and regardless of whether it was
-	## running or not, start it again.
-	$0 stop
-	$0 start
-
-	# Remember status and be quiet
-	rc_status
-	;;
-    force-reload)
-	echo -n "Reload service Hyper-V VSS daemon "
-	$0 try-restart
-	rc_status
-	;;
-    reload)
-	rc_failed 3
-	rc_status -v
-	;;
-    status)
-	echo -n "Checking for service Hyper-V VSS daemon "
-	checkproc $HV_VSS_BIN
-	rc_status -v
-	;;
-    *)
-	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
-	exit 1
-	;;
-esac
-rc_exit
diff --git a/hyper-v.spec b/hyper-v.spec
index a9bc016..a4d849d 100644
--- a/hyper-v.spec
+++ b/hyper-v.spec
@@ -23,19 +23,8 @@
 
 Name:           hyper-v
 ExclusiveArch:  %ix86 x86_64 aarch64
-# systemd for post 13.1 releases
-%if 0%{?suse_version} > 1310
-%define use_systemd 1
-%else
-%define use_systemd 0
-%endif
-%if %{use_systemd}
 %{?systemd_requires}
 BuildRequires:  pkgconfig(systemd)
-%else
-PreReq:         %insserv_prereq
-Requires(pre):  coreutils
-%endif
 # Due to usage of char device instead of netlink
 Conflicts:      kernel < 4.2
 Summary:        Microsoft Hyper-V tools
@@ -52,11 +41,8 @@ Source5:        hyper-v.kvptest.ps1.txt
 Source7:        hyper-v.compare-with-upstream.sh
 Source9:        hyper-v.include.linux.hyperv.h
 Source10:       hyper-v.tools.hv.hv_kvp_daemon.c
-Source11:       hyper-v.init.sh
 Source12:       hyper-v.tools.hv.hv_vss_daemon.c
-Source13:       hyper-v.init.vss.sh
 Source14:       hyper-v.tools.hv.hv_fcopy_daemon.c
-Source15:       hyper-v.init.fcopy.sh
 Source20:       hyper-v.tools.hv.hv_get_dhcp_info.sh
 Source21:       hyper-v.tools.hv.hv_get_dns_info.sh
 Source22:       hyper-v.tools.hv.hv_set_ifconfig.sh
@@ -115,12 +101,8 @@ gcc \
 	-o %{hv_fcopy_daemon}
 
 %install
-%if %{use_systemd}
 # It is not a callable app anyway, so move it out of the way
 bindir=%{helper_dir}/bin
-%else
-bindir=%{_sbindir}
-%endif
 mkdir -p $RPM_BUILD_ROOT${bindir}
 mkdir -p $RPM_BUILD_ROOT%{_sbindir}
 mkdir -p $RPM_BUILD_ROOT%{helper_dir}/bin
@@ -141,7 +123,6 @@ cp -avL %{S:20} $RPM_BUILD_ROOT%{helper_dir}/bin/hv_get_dhcp_info
 cp -avL %{S:21} $RPM_BUILD_ROOT%{helper_dir}/bin/hv_get_dns_info
 cp -avL %{S:22} $RPM_BUILD_ROOT%{helper_dir}/bin/hv_set_ifconfig
 chmod 755 $RPM_BUILD_ROOT%{helper_dir}/bin/*
-%if %{use_systemd}
 d=$RPM_BUILD_ROOT%{_unitdir}
 mkdir -vp ${d}
 #
@@ -236,25 +217,12 @@ fi
 EOF
 chmod 755 $RPM_BUILD_ROOT${bindir}/${helper}
 #
-%else
-mkdir -p $RPM_BUILD_ROOT/etc/init.d
-install -m755 %{S:11} $RPM_BUILD_ROOT/etc/init.d/%{hv_kvp_daemon}
-ln -sfvbn ../../etc/init.d/%{hv_kvp_daemon} $RPM_BUILD_ROOT${bindir}/rc%{hv_kvp_daemon}
-install -m755 %{S:13} $RPM_BUILD_ROOT/etc/init.d/%{hv_vss_daemon}
-ln -sfvbn ../../etc/init.d/%{hv_vss_daemon} $RPM_BUILD_ROOT${bindir}/rc%{hv_vss_daemon}
-install -m755 %{S:15} $RPM_BUILD_ROOT/etc/init.d/%{hv_fcopy_daemon}
-ln -sfvbn ../../etc/init.d/%{hv_fcopy_daemon} $RPM_BUILD_ROOT${bindir}/rc%{hv_fcopy_daemon}
-%endif
 
 %files
 %doc kvptest.ps1.txt
-%if %{use_systemd}
 %{_unitdir}
 %dir /usr/lib/udev
 %{_udevrulesdir}
-%else
-/etc/init.d/*
-%endif
 %{_sbindir}/*
 %{helper_dir}
 
@@ -277,9 +245,7 @@ then
 	fi
 	rmdir -v  /var/opt/hyperv || :
 fi
-%if %{use_systemd}
 : nothing to do in case of systemd
-%endif
 
 %post
 board_vendor=
@@ -298,33 +264,14 @@ then
 fi
 if test "${board_vendor}" = "Microsoft Corporation" -a "${product_name}" = "Virtual Machine"
 then
-%if %{use_systemd}
 : nothing to do in case of systemd
-%else
-	echo "Enabling %{hv_kvp_daemon} on '${product_name}' from '${board_vendor}'"
-	%{insserv_force_if_yast %{hv_kvp_daemon}}
-	echo "Enabling %{hv_vss_daemon} on '${product_name}' from '${board_vendor}'"
-	%{insserv_force_if_yast %{hv_vss_daemon}}
-	echo "Enabling %{hv_fcopy_daemon} on '${product_name}' from '${board_vendor}'"
-	%{insserv_force_if_yast %{hv_fcopy_daemon}}
-%endif
 fi
 
 %preun
-%if %{use_systemd}
 : nothing to do in case of systemd
-%else
-%stop_on_removal %{hv_kvp_daemon}
-%stop_on_removal %{hv_vss_daemon}
-%stop_on_removal %{hv_fcopy_daemon}
-%endif
 
 %postun
 # no restart on update because the daemon can not be restarted
-%if %{use_systemd}
 : nothing to do in case of systemd
-%else
-%insserv_cleanup
-%endif
 
 %changelog