pool/ipxe
SHA256
17
0
Fork 1
Code Issues Pull Requests Activity
Files
factory
ipxe/ipxe.changes

1146 lines
63 KiB
Plaintext
Raw Permalink Blame History

-------------------------------------------------------------------
Fri Aug 29 05:59:46 UTC 2025 - Bernhard Wiedemann <bwiedemann@suse.de>
- Add fix-i586.patch to fix compilation for i586 with gcc-15
-------------------------------------------------------------------
Fri Aug 29 01:26:36 UTC 2025 - Bernhard Wiedemann <bwiedemann@suse.de>
- Drop -Werror
-------------------------------------------------------------------
Thu Aug 28 12:28:14 UTC 2025 - Ana Guerrero <ana.guerrero@suse.com>
- Update to version 1.21.1+git20250827.61b4585e2:
* [efi] Drag in MNP driver whenever SNP driver is present
* [bnxt] Update CQ doorbell type
* [dwgpio] Use fdt_reg() to get GPIO port numbers
* [fdt] Provide fdt_reg() for unsized single-entry regions
* [cmdline] Show commands in alphabetical order
* [digest] Treat inability to acquire an image as a fatal error
* [digest] Add "--set" option to store digest value in a setting
* [digest] Add commands for all enabled digest algorithms
* [dwgpio] Add driver for the DesignWare GPIO controller
* [gpio] Add a framework for GPIO controllers
* [fdt] Use phandle as device location
* [dwmac] Show core version in debug messages
* [bnxt] Remove unnecessary test_if macro
* [bnxt] Remove unnecessary I/O macros
* [serial] Explicitly initialise serial console UART to NULL
* [undi] Assume that legacy interrupts are broken for any PCIe device
* [pxeprefix] Display PCI vendor and device ID in PXE startup banner
* [fdt] Add ability to locate node by phandle
* [dwusb] Add driver for DesignWare USB3 host controller
* [xhci] Allow for non-PCI xHCI host controllers
* [xhci] Use root hub port number to determine slot type
* [efi] Check only the non-extended WaitForKey event
* [efi] Allow compiler to perform type checks on EFI_EVENT
* [init] Show initialisation function names in debug messages
* [efi] Assume that vendor wireless drivers are unusable via SNP
* [efi] Drop to external TPL for calls to ConnectController()
* [efi] Provide efi_tpl_name() for transcribing TPLs in debug messages
* [dwmac] Add driver for DesignWare Ethernet MAC
* [dma] Use virtual addresses for dma_map()
* [build] Handle isohybrid with xorrisofs
* [iobuf] Ensure I/O buffer data sits within unshared cachelines
* [uaccess] Allow for coherent DMA mapping of the 32-bit address space
* [bnxt] Update supported devices array
* [bnxt] Update device descriptions
* [bnxt] Remove VLAN stripping logic
* [bnxt] Increase Tx descriptors
* [build] Disable use of common symbols
* [build] Allow for the existence of small-data sections
* [legacy] Allocate legacy driver .bss-like segments at probe time
* [legacy] Rename the global legacy NIC to "legacy_nic"
* [legacy] Allocate extra padding in receive buffers
* [pxe] Use a weak symbol for isapnp_read_port
* [fdtcon] Add basic support for FDT-based system serial console
* [dwuart] Read input clock frequency from the device tree
* [uart] Wait for 16550 UART to become idle before modifying LCR
* [serial] Allow platform to specify mechanism for identifying console
* [dwuart] Add "ns16550a" compatible device ID
* [dwuart] Add a basic driver for the Synopsys DesignWare UART
* [uart] Allow for dynamically registered 16550 UARTs
* [uart] Add support for MMIO-accessible 16550 UARTs
* [uart] Allow for the existence of non-16550 UARTs
* [uart] Remove ability to use frame formats other than 8n1
* [fdt] Allow paths and aliases to be terminated with separator characters
* [bnxt] Remove TX padding
* [fdtmem] Limit relocation to 32-bit address space
* [dt] Allow for creation of standalone devices
* [ipv4] Add support for classless static routes
* [ipv4] Extend routing mechanism to handle non-default routes
* [ipv4] Add self-tests for IPv4 routing
* [test] Add infrastructure for test network devices
* [dt] Locate parent node at point of use in dt_ioremap()
* [fdt] Provide ability to locate the parent device node
* [fdt] Add tests for device tree creation
* [image] Use image name rather than pointer value in all debug messages
* [fdtmem] Ignore reservation regions with no fixed addresses
* [memmap] Allow explicit colour selection for memory map debug messages
* [memmap] Rename addr/last fields to min/max for clarity
* [lkrn] Support initrd construction for RISC-V bare-metal kernels
* [initrd] Squash and shuffle only initrds within the external heap
* [initrd] Split out initrd construction from bzimage.c
* [initrd] Allow for images straddling the top of the reshuffle region
* [initrd] Rename bzimage_align() to initrd_align()
* [initrd] Swap initrds entirely in-place via triple reversal
* [uheap] Expose external heap region directly
* [uheap] Prevent allocation of blocks with zero physical addresses
* [fdtmem] Allow iPXE to be relocated to the top of the address space
* [lkrn] Shut down devices before jumping to kernel entry point
* [lkrn] Allow a single initrd to be passed to the booted kernel
* [fdt] Allow an initrd to be specified when creating a device tree
* [initrd] Move initrd reshuffling to be architecture-independent code
* [image] Use image replacement when executing extracted images
* [lkrn] Add support for EFI zboot compressed kernel images
* [lkrn] Add basic support for the RISC-V Linux kernel image format
* [bios] Use generic external heap based on the system memory map
* [uheap] Add a generic external heap based on the system memory map
* [malloc] Allow heap to specify block and pointer alignments
* [malloc] Allow for the existence of multiple heaps
* [memmap] Remove now-obsolete get_memmap()
* [bios] Use memmap_describe() to find an external heap location
* [settings] Use memmap_describe() to construct memory map settings
* [bios] Use memmap_describe() to find a relocation address
* [comboot] Use memmap_describe() to obtain available memory
* [multiboot] Use memmap_describe() to construct Multiboot memory map
* [image] Use memmap_describe() to check loadable image segments
* [memmap] Use memmap_dump_all() to dump debug memory maps
* [bios] Describe umalloc() heap as an in-use memory area
* [bios] Update to use the generic system memory map API
* [fdtmem] Update to use the generic system memory map API
* [memmap] Define an API for managing the system memory map
* [tests] Remove prehistoric umalloc() test code
* [fdtmem] Record size of accessible physical address space
* [bios] Rename memmap.c to int15.c
* [bnxt] Use updated DMA APIs
* [bnxt] Return proper error codes in probe
* [crypto] Remove redundant null pointer check
* [fdtmem] Add ability to parse FDT memory map for a relocation address
* [fdt] Generalise access to "reg" property
* [build] Formalise mechanism for accessing absolute symbols
* [libc] Display assertion failure message before incrementing counter
* [uaccess] Generalise librm's virt_offset mechanism for RISC-V
* [build] Constrain PHYS_CODE() and REAL_CODE() to use i386 registers
* [zbin] Allow for constructing compressed dynamic relocation records
* [build] Allow for 32-bit and 64-bit versions of util/zbin
* [uaccess] Remove redundant virt_to_user() and userptr_t
* [uaccess] Reduce scope of included uaccess.h header
* [image] Make image data read-only to most consumers
* [image] Add the concept of a static image
* [image] Move embedded images from .rodata to .data
* [test] Separate read-only and writable CMS test images
* [uaccess] Remove redundant copy_from_user() and copy_to_user()
* [image] Clear recorded replacement image immediately after consuming
* [bofm] Remove userptr_t from BOFM table parsing and updating
* [bofm] Allow BOFM tests to be run without a BOFM-capable device driver
* [build] Remove some long-obsolete unused header files
* [peerdist] Remove never-used peerdist_msg_blk() macro
* [peerdist] Remove userptr_t from PeerDist content information parsing
* [xferbuf] Simplify and generalise data transfer buffers
* [prefix] Remove userptr_t from command line image construction
* [comboot] Remove userptr_t from COM32 API implementation
* [comboot] Remove userptr_t from COMBOOT API implementation
* [comboot] Remove userptr_t from COMBOOT image parsing
* [uaccess] Remove redundant UNULL definition
* [bzimage] Remove userptr_t from bzImage parsing
* [initrd] Use physical addresses for calculations on initrd locations
* [bzimage] Use image name in debug messages
* [efi] Add ability to reboot to firmware setup menu
* [reboot] Generalise warm reboot indicator to a flags bitmask
* [multiboot] Remove userptr_t from Multiboot and ELF image parsing
* [multiboot] Use image name in Multiboot and ELF debug messages
* [linux] Enable compiler warnings when building the linux_api.o object
* [linux] Add missing return statement to linux_poll()
* [build] Disable gcc unterminated-string-initializer warnings
* [build] Remove unsafe disable function wrapper from legacy NIC drivers
* [build] Prevent the use of reserved words in C23
* [build] Fix old-style function definition
* [build] Fix typo in xenver.h header guard
* [pnm] Remove userptr_t from PNM image parsing
* [png] Remove userptr_t from PNG image parsing
* [fbcon] Avoid redrawing unchanged characters when scrolling
* [fbcon] Remove userptr_t from framebuffer console drivers
* [efi] Remove userptr_t from EFI PE image parsing
* [pxe] Remove userptr_t from PXE file API implementation
* [pxe] Remove userptr_t from PXE API call dispatcher
* [cmdline] Remove userptr_t from "digest" command
* [nbi] Remove userptr_t from NBI image parsing
* [sdi] Remove userptr_t from SDI image parsing
* [pxe] Remove userptr_t from PXE NBP image parsing
* [block] Remove userptr_t from block device abstraction
* [uaccess] Remove now-obsolete memchr_user()
* [script] Remove userptr_t from script image parsing
* [ucode] Remove userptr_t from microcode image parsing
* [ucode] Remove userptr_t from microcode update mechanism
* [thunderx] Replace uses of userptr_t with direct pointer dereferences
* [exanic] Replace uses of userptr_t with direct pointer dereferences
* [uaccess] Remove trivial uses of userptr_t
* [gve] Replace uses of userptr_t with direct pointer dereferences
* [umalloc] Remove userptr_t from user memory allocations
* [smbios] Remove userptr_t from SMBIOS structure parsing
* [acpi] Remove userptr_t from ACPI table parsing
* [deflate] Remove userptr_t from decompression code
* [image] Remove userptr_t from image definition
* [crypto] Remove userptr_t from CMS verification and decryption
* [crypto] Remove userptr_t from ASN.1 parsers
* [uaccess] Remove redundant read_user()
* [uaccess] Replace real_to_user() with real_to_virt()
* [uaccess] Remove user_to_phys() and phys_to_user()
* [uaccess] Remove redundant user_to_virt()
* [uaccess] Remove redundant memcpy_user() and related string functions
* [uaccess] Remove redundant userptr_add() and userptr_diff()
* [uaccess] Change userptr_t to be a pointer type
* [uaccess] Add explicit casts to and from userptr_t where needed
* [uaccess] Rename userptr_sub() to userptr_diff()
* [time] Use currticks() to provide the null system time
* [cgem] Add a driver for the Cadence GEM NIC
* [undi] Work around broken ASUSTeK KNPA-U16 server PXE ROM
* [efi] Inhibit calls to Shutdown() for wireless SNP devices
* [netdevice] Add the concept of an insomniac network device
* [efi] Allow for custom methods for disconnecting existing drivers
* [dt] Provide dt_ioremap() to map device registers
* [fdt] Add fdt_cells() to read cell-based properties such as "reg"
* [netdevice] Add missing bus type identifier for devicetree devices
* [crypto] Allow for explicit control of external trust sources
* [dt] Add basic concept of a devicetree bus
* [fdt] Remove concept of a device tree cursor
* [fdt] Add basic tests for reading values from a flattened device tree
* [fdt] Avoid temporarily modifying path during path lookup
* [fdt] Provide fdt_strings() to read string list properties
* [fdt] Allow for trailing slashes in path lookups
* [crypto] Switch to using python-asn1crypto instead of python-asn1
* [fdt] Populate boot arguments in constructed device tree
* [fdt] Identify free space (if any) at end of parsed tree
* [x509] Ensure certificate remains valid during x509_append()
* [tls] Support fragmentation of transmitted records
* [tls] Send an empty client certificate chain if we have no certificate
* [iobuf] Limit automatic I/O buffer alignment to page size
* [tls] Encrypt data in place to reduce memory usage
* [xfer] Use xfer_alloc_iob() for transmit I/O buffers on stream sockets
* [isa] Disable legacy ISA device probing by default
* [efi] Allow for fact that SNP device may be removed by executed image
* [efi] Check correct return value from efi_pxe_find()
* [efi] Disconnect existing drivers on a per-protocol basis
* [efi] Define an attachment priority order for EFI drivers
* [efi] Show all drivers claiming support for a handle in debug messages
* [efi] Return success from Stop() if driver is already stopped
* [efi] Add various well-known GUIDs encountered in WiFi boot
* [efi] Install a device tree for the booted OS, if available
* [fdt] Provide the ability to create a device tree for a booted OS
* [efi] Create a copy of the system flattened device tree, if present
* [fdt] Allow for parsing device trees where the length is known in advance
* [fdt] Allow for the existence of multiple device trees
* [fdt] Add the "fdt" command
* [fdt] Add the concept of an FDT image
* [efi] Add support for installing EFI configuration tables
* [efi] Add flattened device tree header and GUID definitions
* [efi] Add ACPI and SMBIOS tables as well-known GUIDs
* [undi] Ensure forward progress is made even if UNDI IRQ is stuck
* [pxeprefix] Ensure that UNDI IRQ is disabled before starting iPXE
* [pxeprefix] Work around missing type values from PXENV_UNDI_GET_NIC_TYPE
* [efi] Allow use of typed pointers for efi_open() et al
* [efi] Eliminate uses of HandleProtocol()
* [efi] Use efi_open() for all ephemeral protocol opens
* [efi] Use efi_open_unsafe() for all explicitly unsafe protocol opens
* [efi] Use efi_open_by_driver() for all by-driver protocol opens
* [efi] Use efi_open_by_child() for all by-child protocol opens
* [efi] Create safe wrappers for OpenProtocol() and CloseProtocol()
* [efi] Remove the efipci_open() and efipci_close() wrappers
* [efi] Avoid function name near-collision
* [efi] Remove spurious close of SNP device parent's device path
* [efi] Use driver name only from driver binding handles in debug messages
* [efi] Get veto candidate driver name via either component name protocol
* [efi] Get veto candidate driver name from image handle
* [efi] Show image address range in veto debug messages
* [efi] Prefer driver name to device path for debug messages
* [efi] Attempt to retrieve driver name from image handle for debug messages
* [efi] Allow wrapping the global boot services table in situ
* [efi] Fix debug wrappers for CloseEvent() and CheckEvent()
* [efi] Ignore path separator characters in virtual filenames
* [efi] Prescroll the display after a failed wrapped ExitBootServices() call
* [efi] Add EFI_RNG_PROTOCOL_GUID as a well-known GUID
* [crypto] Update cmsdetach to work with python-asn1 version 3.0.0
* [rng] Restore state of IRQ 8 and PIE when disabling entropy gathering
* [pic8259] Return previous state when enabling or disabling IRQs
* [contrib] Update bochsrc.txt to work with current versions
* [efi] Accept and trust CA certificates in the TlsCaCertificates variable
* [efi] Add TLS authentication header and GUID definitions
* [efi] Add EFI_GLOBAL_VARIABLE as a well-known GUID
* [cpio] Allow for the construction of pure directories
* [cpio] Fix calculation of name lengths in CPIO headers
* [crypto] Support extracting certificates from EFI signature list images
* [crypto] Allow for parsing of DER data separate from DER images
* [efi] Allow efi_guid_ntoa() to be used in non-EFI builds
* [efi] Add EFI_SIGNATURE_LIST header and GUID definitions
* [efi] Update to current EDK2 headers
* [build] Use -fshort-wchar when building EFI host utilities
* [efi] Mark UsbHostController.h as a non-imported header
* [lkrnprefix] Support a longer version string
* [cpio] Allow for construction of parent directories as needed
* [menu] Allow a post-activity timeout to be defined
* [crypto] Start up RBG on demand if needed
* [efi] Increase download timeout for autoexec.ipxe
* [crypto] Support direct reduction only for Montgomery constant R^2 mod N
* [crypto] Expose shifted out bit from big integer shifts
* [bnxt] Allocate TX rings with firmware input
* [malloc] Ensure free memory blocks remain aligned
* [malloc] Clean up debug messages
* [crypto] Add definitions and tests for the NIST P-384 elliptic curve
* [crypto] Add definitions and tests for the NIST P-256 elliptic curve
* [crypto] Add support for Weierstrass elliptic curve point multiplication
* [crypto] Add a generic implementation of a Montgomery ladder
* [test] Add generic tests for elliptic curve point multiplication
* [tls] Allow for NIST elliptic curve point formats
* [crypto] Generalise elliptic curve key exchange to ecdhe_key()
* [crypto] Add bigint_ntoa() for transcribing big integers
* [crypto] Extract bigint_reduce_supremum() from bigint_mod_exp()
* [crypto] Allow for relaxed Montgomery reduction
* [efi] Add EFI_TCG2_PROTOCOL header and GUID definition
* [efi] Update to current EDK2 headers
* [crypto] Calculate inverse of modulus on demand in bigint_montgomery()
* [gve] Run startup process only while device is open
* [crypto] Remove obsolete bigint_mod_multiply()
* [crypto] Use Montgomery reduction for modular exponentiation
* [crypto] Add bigint_montgomery() to perform Montgomery reduction
* [crypto] Use inverse size as effective size for bigint_mod_invert()
* [crypto] Eliminate temporary working space for bigint_mod_invert()
* [crypto] Eliminate temporary working space for bigint_reduce()
* [crypto] Expose carry flag from big integer addition and subtraction
* [crypto] Add bigint_msb_is_set() to clarify code
* [efi] Ensure local drives are connected when attempting a SAN boot
* [build] Allow for per-architecture cross-compilation prefixes
* [sbi] Add support for running as a RISC-V SBI payload
* [build] Allow default platform to vary by architecture
* [pci] Provide a null PCI API for platforms with no PCI bus
* [fdt] Add ability to parse unsigned integer properties
* [pci] Drag in PCI settings mechanism only when PCI support is present
* [uaccess] Rename UACCESS_EFI to UACCESS_FLAT
* [smbios] Provide a null SMBIOS API for platforms with no concept of SMBIOS
* [crypto] Add bigint_mod_invert() to calculate inverse modulo a power of two
* [usb] Expose USB device descriptor and strings via settings
* [usb] Add "usbscan" command for iterating over USB devices
* [crypto] Separate out bigint_reduce() from bigint_mod_multiply()
* [crypto] Use architecture-independent bigint_is_set()
* [crypto] Rename bigint_rol()/bigint_ror() to bigint_shl()/bigint_shr()
* [crypto] Eliminate temporary carry space for big integer multiplication
* [arm] Support building as a Linux userspace binary for AArch32
* [arm] Check PMCCNTR availability before use for profiling
* [profile] Standardise return type of profile_timestamp()
* [crypto] Use constant-time big integer multiplication
* [gve] Allocate all possible event counters
* [efi] Remove redundant EFI_BOOT_FILE definitions
* [linux] Allow a sysroot to be specified via SYSROOT=...
* [efi] Use standard va_args macros instead of VA_START() etc
* [test] Add tests for 64-bit logical and arithmetic shifts
* [efi] Centralise definition of efi_cpu_nap()
* [libc] Centralise architecture-independent portions of setjmp.h
* [cloud] Add ability to delete old AMI images
* [cloud] Add family and architecture tags to AWS snapshots and images
* [ena] Change reported operating system type to "iPXE"
* [gdb] Allow CPU architectures to omit support for GDB
* [build] Centralise dummy architecture-specific headers
* [aqc1xx] Add support for Marvell AQtion Ethernet controller
* [etherfabric] Fix use of uninitialised variable in falcon_xaui_link_ok()
* [test] Add CMS decryption self-tests
* [crypto] Allow cms_decrypt() to be called on unregistered images
* [image] Add the "imgdecrypt" command
* [crypto] Support decryption of images via CMS envelopes
* [image] Split image_strip_suffix() out from image_extract()
* [crypto] Add cmsdetach script for detaching encrypted data from CMS messages
* [test] Update CMS self-test terminology
* [crypto] Allow for extraction of ASN.1 algorithm parameters
* [crypto] Hold CMS message as a single ASN.1 object
* [crypto] Remove the concept of a public-key algorithm reusable context
* [tls] Group client and server state in TLS connection structure
* [tls] Group transmit and receive state in TLS connection structure
* [gve] Add missing error codes in EUNIQ() list of potential errors
* [contrib] Remove obsolete rom-o-matic code
* [test] Generalise public-key algorithm tests and use okx()
* [crypto] Pass asymmetric keys as ASN.1 cursors
* [efi] Allow discovery of PCI bus:dev.fn address ranges
* [pci] Separate permission to probe buses from bus:dev.fn range discovery
* [crypto] Fix debug name for empty certificate chain validators
* [crypto] Generalise cms_signature to cms_message
* [crypto] Add OID-identified algorithms for AES ciphers
* [crypto] Pass image as parameter to CMS functions
* [crypto] Allow passing a NULL certificate store to x509_find() et al
* [crypto] Centralise mechanisms for identifying X.509 certificates
* [crypto] Extend asn1_enter() to handle partial object cursors
* [crypto] Clarify ASN.1 cursor invalidation behaviour
* [crypto] Do not return an error when skipping the final ASN.1 object
* [cpuid] Allow hypervisor CPUID leaves to be accessed as settings
* [cpuid] Allow reading hypervisor CPUID leaves
* [smbios] Allow reading an entire SMBIOS data structure as a setting
* [smbios] Avoid reading beyond end of constructed SMBIOS setting
* [cloud] Add utility to read INT13CON partition in Google Compute Engine
* [gve] Increase number of receive buffers to reduce packet loss
* [gve] Add driver for Google Virtual Ethernet NIC
* [cloud] Add utility for importing images to Google Compute Engine
* [ipv6] Expose router address for DHCPv6 leased addresses
* [ipv4] Support small subnets with no directed broadcast address
* [hci] Remove the generalised widget user interface abstraction
* [form] Reimplement the "login" user interface
* [form] Add support for dynamically created interactive forms
* [dynui] Add concept of a secret user interface item
* [dynui] Allow for multiple flags on a user interface item
* [dynui] Generalise mechanisms for looking up user interface items
* [dynui] Generalise the concept of a menu to a dynamic user interface
* [hci] Allow tab key to be used to cycle through UI elements
* [hci] Rename "item" command's first parameter from "label" to "name"
* [hci] Split out msg() and alert() from settings UI code
* [hci] Draw all widgets on the standard screen
* [libc] Add stpcpy()
* [hci] Provide a general concept of a text widget set
* [test] Add test cases for editable strings
* [hci] Fix semantics of replace_string() to match code comments
* [efi] Veto the Dhcp6Dxe driver on all platforms
* [hci] Use dynamically allocated buffers for editable strings
* [efi] Do not attempt to download autoexec.ipxe without a valid base URI
* [netdevice] Add "linktype" setting
* [efi] Restructure handling of autoexec.ipxe script
* [cachedhcp] Allow cached DHCPACK to apply to temporary network devices
* [efi] Add the ability to create a temporary MNP network device
* [efi] Allow for allocating EFI devices from arbitrary handles
-------------------------------------------------------------------
Mon Apr 01 04:48:13 UTC 2024 - william.brown@suse.com
- Remove 1082.patch which has an alternative merged upstream
- Update to version 1.21.1+git20240329.764e34f:
* [http] Add error table entry for HTTP 404 Not Found error
* [tftp] Add error table entry for TFTP "file not found" error code
* [efi] Add error table entry for local filesystem EFI_NOT_FOUND error
* [efi] Report local file errors during download, rather than on opening
* [image] Allow opaque URI component to provide image name
* [build] Fix build failures with random versions of gcc
* [efi] Extract basic network settings from loaded image device path
* [efi] Add efi_path_mac() to parse a MAC address from an EFI device path
* [efi] Add support for driving EFI_MANAGED_NETWORK_PROTOCOL devices
* [efi] Allow for drivers to be located via child handles
* [efi] Add helper functions for service binding protocols
* [efi] Match chainloaded device by uppermost matching handle
* [efi] Set current working URI from our own device path URI, if present
* [efi] Add efi_path_uri() to parse a URI from an EFI device path
* [settings] Expose current working URI and directory URI via settings
* [efi] Pad transmit buffer length to work around vendor driver bugs
* [golan] Use ETH_HLEN for inline header size
* [build] Fix building on older versions of gcc
* [snp] Allocate additional padding for receive buffers
* [ucode] Add support for updating x86 microcode
* [bios] Provide a multiprocessor API for BIOS
* [librm] Add support for installing a startup IPI handler
* [efi] Provide a multiprocessor API for EFI
* [mp] Define an API for multiprocessor functions
* [efi] Update to current EDK2 headers
* [ci] Update action versions to silence GitHub warnings
* [efi] Do not report return status from efi_block_local()
* [block] Allow SAN boot device to be identified by filesystem label
* [block] Allow SAN boot device to be identified by an extra filename
* [block] Allow SAN boot device to be identified by UUID
* [efi] Add efi_path_guid() utility function
* [block] Allow for additional SAN boot parameters alongside filename
* [efi] Allow booting from local disks via the "sanboot" command
* [block] Allow for iteration over SAN device list in drive number order
* [efi] Generalise block device boot to support arbitrary EFI handles
* [efi] Use file system protocol to check for SAN boot filename existence
* [block] Use drive number as debug message stream ID
* [efi] Use long forms of device paths in debug messages
* [parseopt] Add parse_uuid() for parsing UUID command-line arguments
* [settings] Add parsing for UUID and GUID settings types
* [uuid] Add uuid_aton() to parse a UUID from a string
* [efi] Work around broken boot services table manipulation by UEFI shim
* [eap] Add support for the MS-CHAPv2 authentication method
* [eap] Allow MD5-Challenge authentication method to be disabled
* [eap] Add progress debug messages
* [efi] Ignore new LoongArch PC-relative relocations and relaxations
* [drivers] Sort PCI_ROM() entries numerically
* [crypto] Force inlining of trivial wrapper functions
* [crypto] Add implementation of MS-CHAPv2 authentication
* [crypto] Allow for multiple cross-signed certificate download attempts
* [crypto] Add x509_is_self_signed() helper function
* [crypto] Add x509_truncate() to truncate a certificate chain
* [list] Add list_for_each_entry_safe_continue()
* [list] Add list_is_head_entry()
* [build] Fix build failures with older versions of gcc
* [libc] Allow build_assert() failures to be ignored via NO_WERROR=1
* [bnxt] Add support for BCM957608
* [crypto] Add implementation of the DES cipher
* [test] Remove dummy initialisation vector for ECB-mode AES tests
* [crypto] Fix stray references to AES
* [tls] Tidy up error handling flow in tls_send_plaintext()
* [efi] Fix hang during ExitBootServices()
* [tls] Add ECDHE cipher suites
* [tls] Make key exchange algorithms selectable via build configuration
* [crypto] Add X25519 OID-identified algorithm and TLS named curve
* [tls] Add support for Ephemeral Elliptic Curve Diffie-Hellman key exchange
* [tls] Split out Diffie-Hellman parameter signature verification
* [tls] Generate key material after sending ClientKeyExchange
* [tls] Restructure construction of ClientHello message
* [crypto] Add an abstraction of an elliptic curve
* [crypto] Check for all-zeros result from X25519 key exchange
* [bnxt] Add support for additional chip IDs
* [crypto] Add X25519 key exchange algorithm
* [loong64] Replace broken big integer arithmetic implementations
* [crypto] Add bigint_swap() to conditionally swap big integers
* [crypto] Add bigint_copy() as a convenient wrapper macro
* [crypto] Allow multiplicand and multiplier to differ in size
* [libc] Replace linker_assert() with build_assert()
* [libc] Make static_assert() available via assert.h
* [build] Fix building with newer binutils
* [build] Remove unnecessary ".text" directives
* [eap] Add support for the MD5-Challenge authentication type
* [eap] Add support for sending an EAP identity
* [eap] Ignore any received EAP responses
* [build] Reduce scope of wildcard .gitignore rules
* [smbios] Support scanning for the 64-bit SMBIOS3 entry point
* [intel] Add PCI ID for I219-LM (23)
* [efi] Add potentially missing relocation types
* [efi] Fix Coverity warning about unintended sign extension
* [efi] Add relocation types generated by clang
* [build] Use SOURCE_DATE_EPOCH for FAT serial number if it exists
* [efi] Allow compiling elf2efi with clang
* [efi] Avoid modifying PE/COFF debug filename
* [efi] Extend PE header size to cover space up to first section
* [efi] Fix dependency list construction in EDK2 header import script
* [efi] Maximise image base address
* [efi] Do not assume canonical PE section ordering
* [efi] Treat 16-bit sections as hidden in hybrid binaries
* [efi] Place PE debug information in a hidden section
* [efi] Fix recorded overall size of headers in NT optional header
* [efi] Write out PE header only after writing sections
* [efi] Use load memory address as file offset for hybrid binaries
* [efi] Mark PE images as large address aware
* [efi] Set NXCOMPAT bit in PE header
* [efi] Treat writable sections as data sections
* [efi] Update to current EDK2 headers
* [cloud] Add utility script to read iPXE output from INT13CON partition
* [cloud] Add ability to overwrite existing AMI images
* [eapol] Limit number of EAPoL-Start packets transmitted per attempt
* [eapol] Delay EAPoL-Start while waiting for EAP to complete
* [pci] Require discovery of a PCI device when determining usable PCI APIs
* [pci] Check that ECAM configuration space is within reachable memory
* [pci] Cache ECAM mapping errors
* [pci] Handle non-zero starting bus in ECAM allocations
* [pci] Force completion of ECAM configuration space writes
* [iphone] Add missing va_start()/va_end() around reused argument list
-------------------------------------------------------------------
Mon Nov 20 12:32:04 UTC 2023 - Bernhard Wiedemann <bwiedemann@suse.com>
- Add 1082.patch to make ipxe.sdsk build reproducible (boo#1062303)
-------------------------------------------------------------------
Mon Nov 6 16:16:13 UTC 2023 - Dominique Leuenberger <dimstar@opensuse.org>
- Fix build with RPM 4.19: unnumbered patches are no longer
supported.
-------------------------------------------------------------------
Wed Oct 18 16:08:11 UTC 2023 - Michal Suchanek <msuchanek@suse.com>
- Add floppy disk image.
* use syslinux-mtools for building the image syslinux-mtools.patch
-------------------------------------------------------------------
Wed Oct 18 06:21:54 UTC 2023 - Michal Suchanek <msuchanek@suse.com>
- Update to version 1.21.1+git20231006.ff0f8604:
* [libc] Use wall clock time as seed for the (non-cryptographic) RNG
* [eapol] Send EAPoL-Start packets to trigger EAP authentication
* [eap] Define a supplicant model for EAP and EAPoL
* [dhcp] Request NTP server option
* [ntp] Define NTP server setting
* [efi] Provide read-only access to EFI variables via settings mechanism
* [crypto] Add support for PKCS#8 private key format
* [efi] Add support for executing images via a shim
* [image] Generalise concept of selected image
* [tls] Handle fragmented handshake records (jsc#PED-5536)
* [params] Allow for arbitrary HTTP request headers to be specified
* [rng] Allow entropy source to be selected at runtime
* [efi] Support the initrd autodetection mechanism in newer Linux kernels
* [loong64] Add initial support for LoongArch64
* [efi] Enable NET_PROTO_LLDP by default
* [dhcp] Ignore DHCPNAK unless originating from the selected DHCP server
* [xen] Update to current Xen headers
* [efi] Allow autoexec script to be located alongside iPXE binary
* [efi] Accept a command line passed to an iPXE image via LoadOptions
* [efi] Update to current EDK2 headers
* [golan] Add new PCI ID for NVIDIA BlueField-3 network device
* [arm] Support building as a Linux userspace binary for AArch64
-------------------------------------------------------------------
Wed Aug 23 21:47:48 UTC 2023 - Héctor Orón Martínez <hector.oron@gmail.com>
- enable HTTPS downloads (jsc#PED-5536)
-------------------------------------------------------------------
Mon Feb 6 17:47:32 UTC 2023 - Egbert Eich <eich@suse.com>
- cross-aarch64-gcc7 is not available for SLE-15 (i586).
Also, there is no Leap port for i586, so let's disable aarch64
cross-compile target on i586 (bsc#1207796).
-------------------------------------------------------------------
Mon Jan 23 14:43:38 UTC 2023 - Christian Goll <cgoll@suse.com>
- enable compressed images
-------------------------------------------------------------------
Fri Jan 20 19:42:52 UTC 2023 - msuchanek@suse.com
- Update to version 1.21.1+git20230120.a99e435c:
* [efi] Do not rely on ProcessorBind.h when building host binaries (bsc#1207310)
* multiple [ena] [efi] [tls] [intel] [intelxl] enhancements
* [image] Do not clear current working URI when executing embedded image
* [console] Fix definition of unreachability for remapped keys
* [console] Add Swedish "se" keymap
* [efi] Support keyboard remapping via the EFI console
* [usb] Support keyboard remapping via the native USB keyboard driver
* [ecm] Use ACPI-provided system-specific MAC address if present
- Build on all architectures (jsc#PED-1148)
-------------------------------------------------------------------
Thu Jan 19 13:31:56 UTC 2023 - Bernhard Wiedemann <bwiedemann@suse.com>
- Make bootimgs subpackage architecture-specific
-------------------------------------------------------------------
Mon Jun 20 08:35:31 UTC 2022 - Dominique Leuenberger <dimstar@opensuse.org>
- Use the default gcc version in Tumbleweed builds.
-------------------------------------------------------------------
Sun May 22 15:32:17 UTC 2022 - Ferdinand Thiessen <rpm@fthiessen.de>
- Update to version 1.21.1+git20210908.02ec659b:
* [acpi] Generalise DSDT/SSDT data extraction logic
* [efi] Record cached ProxyDHCPOFFER and PXEBSACK, if present
* [efi] Use zero for PCI vendor/device IDs when no applicable ID exists
* [cloud] Retry DHCP aggressively in AWS EC2
* [efi] Match signtool expectations for file alignment
* [libc] Allow for externally-defined LITTLE_ENDIAN and BIG_ENDIAN constants
* [uri] Make URI schemes case-insensitive
* [rdc] Add driver for RDC R6040 embedded NIC
* [realtek] Work around hardware bug on RTL8211B
* [cloud] Show ifstat output after a failed boot attempt
* [peerdist] Assume that most recently discovered peer can be reused
- Fixes build on Leap
- Add workaround for building with GCC12 (Factory)
-------------------------------------------------------------------
Sun May 22 15:08:10 UTC 2022 - Ferdinand Thiessen <rpm@fthiessen.de>
- Fix version, base version, starting with 1.20.1+git20210604.065dce8d,
was 1.21.1 not 1.20.1 as 1.21.1 was released December 2020.
So current version is: 1.21.1+git20210614.bf4ccd42
-------------------------------------------------------------------
Thu Jun 17 09:12:05 UTC 2021 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Since last update, syslinux is required to build the ISO but
it is available only on x86*, so disable ISO build for non-x86*
-------------------------------------------------------------------
Mon Jun 14 15:54:33 UTC 2021 - bwiedemann@suse.com
- Update to version 1.20.1+git20210614.bf4ccd42:
* [build] Ensure build ID is deterministic (boo#1047218)
* [efi] Veto the Itautec Ip4ConfigDxe driver
* [libc] Match standard prototype for putchar()
* [base64] Include terminating NUL within base64 character array
* [rndis] Fix size of reserved fields
-------------------------------------------------------------------
Fri Jun 04 16:04:51 UTC 2021 - bwiedemann@suse.com
- use xorrisofs for creating iso
- Update to version 1.20.1+git20210604.065dce8d:
* [ath5k] Avoid returning uninitialised data on EEPROM read errors
* [crypto] Add memory output constraints for big-integer inline assembly
* [build] Use SOURCE_DATE_EPOCH for isohybrid MBR ID if it exists
* [build] Use SOURCE_DATE_EPOCH for .iso timestamps if it exists
* [cpio] Split out bzImage initrd CPIO header construction
* [x509] Use case-insensitive comparison for certificate names
* [libc] Add strncasecmp()
* [bnxt] Use hexadecimal values in PCI_ROM entries
* [intel] Add PCI ID for I219-V and -LM 10 to 15
* [image] Support archive image formats independently of "imgextract" command
* [image] Propagate trust flag to extracted archive images
* [image] Allow single-member archive images to be executed transparently
* [undi] Read TSC only when profiling
* [rng] Check for TSC support before using RTC entropy source
* [prefix] Specify i486 architecture for LZMA decompressor
* [gzip] Add support for gzip archive images
* [zlib] Add support for zlib archive images
* [image] Add "imgextract" command for extracting archive images
* [image] Provide image_set_len() utility function
* [cloud] Allow multiple images to be imported simultaneously
* [cloud] Attempt to include CPUID_SETTINGS only for x86 builds
* [cloud] Autodetect CPU architecture from AMI disk image
* [cloud] Use a sortable default AMI name
* [cloud] Add ability to generate Dokuwiki table of AMI images
* [settings] Add --timeout option to "read" command
* [readline] Add an optional timeout to readline_history()
* [build] Fix genfsimg to build ISO with long filenames
* [xen] Avoid infinite loop on allocation failure in xenstore_response()
* [xen] Support scatter-gather to allow for jumbo frames
* [int13] Do not report INT 13 extension support for emulated floppies
* [cloud] Enable "poweroff" command in cloud images
* [netdevice] Ensure driver transmit() and poll() will not be re-entered
* [pci] Avoid scanning nonexistent buses when using PCIAPI_DIRECT
* [intel] Add additional PCI device ID to table
* [dhcp] Handle DHCPNAK by returning to discovery state
* [linux] Do not assume that stat() works on sysfs files
* [linux] Validate length of ACPI table read from sysfs
* [linux] Place -lslirp at end of linker search list
* [linux] Use fstat() rather than statx()
* [linux] Use generic sysfs mechanism to read SMBIOS + ACPI tables
* [linux] Add a generic function for reading files from sysfs
* [linux] Free cached ACPI tables on shutdown
* [dns] Reduce debug verbosity for DNS server list
* [linux] Allow arbitrary settings to be applied to Linux devices
* [linux] Add missing pci_num_bus() stub
* [slirp] Add libslirp driver for Linux
* [linux] Provide ACPI settings via /sys/firmware/acpi/tables
* [acpi] Allow for platforms that provide ACPI tables individually
* [acpi] Eliminate redundant acpi_find_rsdt() in acpi_sx()
* [acpi] Use a fixed colour for debug messages
* [linux] Use host glibc system call wrappers
* [linux] Add a prefix to all symbols to avoid future name collisions
* [bitops] Provide an explicit operand size for bit test instructions
* [librm] Test for FXSAVE/FXRSTOR instruction support
* [librm] Add missing __asmcall on init_idt()
* [prefix] Add a generic raw image prefix
* [initrd] Allow for zero-length initrd files
* [cloud] Do not enable serial console on EFI platforms
* [pxe] Split out platform-independent portions of cachedhcp.c
* [ath5k] Add missing AR5K_EEPROM_READ in ath5k_eeprom_read_turbo_modes
* [cloud] Enable IPv6 and HTTPS in cloud boot images
* [cloud] Add utility for importing images to AWS EC2
* [cloud] Use PCIAPI_DIRECT for cloud images
* [ena] Switch to two-phase reset mechanism
* [ci] Disable redundant scheduled execution of Coverity Scan
* [ci] Disable Travis CI
* [ci] Add GitHub action for Coverity Scan
* [ci] Add GitHub action for build testing
* [contrib] Update bochsrc.txt to work with current versions
* [hermon] Add support for ConnectX-3 based cards
* [autoboot] Avoid closing and immediately reopening network device
* [hermon] Avoid parsing length field on completion errors
* [hermon] Make hermon_dump_xxx() functions no-ops on non-debug builds
* [hermon] Minimise reset time
* [hermon] Throttle debug output when sensing port type
* [hermon] Add a debug notice when initialization is complete
* [hermon] Add support for port management event
* [hermon] Adjust Ethernet work queue size
* [hermon] Use reset value suitable for ConnectX-3
* [hermon] Clean up whitespace in hermon.c
* [iscsi] Update link to iBFT reference manual
* [hermon] Limit link poll frequency in DOWN state
* [hermon] Perform clean MPT unmap on device shutdown
* [hermon] Use Ethernet MAC as eIPoIB local EMAC
* [hermon] Increase polling rate for command completions
* [hermon] Add event queue debug functions
* [hermon] Increase command timeout from 2 to 10 seconds
* [hermon] Add assorted debug error messages
* [hermon] Show "issuing command" messages only at DBGLVL_EXTRA
* [hermon] Reorganize PCI ROM list and document well-known product names
* [golan] Backport typo fix in nodnic_prm.h: s/HERMON/NODNIC/
* [arbel] Clean up whitespace in MT25218_PRM.h header
* [hermon] Clean up whitespace in MT25408_PRM.h header
* [image] Implicitly trust first embedded image
* [infiniband] Require drivers to specify the number of ports
* [ifmgmt] Make "ifstat" show the link-layer protocol for each netdev
* [cmdline] Expose "iflinkwait" as a command
* [image] Provide image_memory()
* [travis] Update to current default build environment
* [tftp] Allow for profiling of client and server turnaround times
* [image] Add the "imgmem" command
* [image] Provide image_set_data()
* [ipv6] Defer router discovery timeout while link is blocked
* [dhcp] Allow for links that remained blocked for up to three minutes
* [eap] Treat an EAP Request-Identity as indicating a blocked link
* [eapol] Replace EAPoL code
* [dhcp] Continue transmitting DHCPDISCOVER while link is blocked
* [isa] Add missing #include <config/isa.h>
* [xhci] Avoid false positive Coverity warning
* [xhci] Show meaningful error messages after command failures
* [xhci] Fail attempts to issue concurrent commands
* [smbios] Add support for the 64-bit SMBIOS3 entry point
* [sfc] Update email addresses
* [x509] Clarify debug message for an untrusted X.509 issuer
* [golan] Add new PCI IDs
* [iphone] Add iPhone tethering driver
* [crypto] Allow private key to be specified as a TLS connection parameter
* [tls] Include root of trust within definition of TLS session
* [x509] Make root of trust a reference-counted structure
* [x509] Record root of trust used when validating a certificate
* [ocsp] Remove dummy OCSP certificate root
* [http] Hide HTTP transport-layer filter implementation details
* [asn1] Define ASN1_SHORT() for constructing short tagged values
* [asn1] Rename ASN1_OID_CURSOR to ASN1_CURSOR
* [asn1] Add constant for UTF-8 string tag
* [tls] Allow provision of a client certificate chain
* [tls] Use intf_insert() to add TLS to an interface
* [interface] Provide intf_insert() to insert a filter interface
* [interface] Ignore any attempts to plug in the null interface
* [xhci] Update driver to use DMA API
* [dma] Provide dma_umalloc() for allocating large DMA-coherent buffers
* [netdevice] Fix misleading comment on netdev_rx()
* [netdevice] Do not attempt to unmap a null I/O buffer
* [dma] Move I/O buffer DMA operations to iobuf.h
* [dma] Record DMA device as part of DMA mapping if needed
* [dma] Modify DMA API to simplify calculation of medial addresses
* [intelxl] Configure DMA mask as 64-bit
* [intel] Configure DMA mask as 64-bit
* [intelxl] Update driver to use DMA API
* [intelxl] Read PCI bus:dev.fn number from PFFUNC_RID register
* [intelxl] Read MAC address from PRTPM_SA[HL] instead of PRTGL_SA[HL]
* [intel] Use physical addresses in debug messages
* [realtek] Use physical addresses in debug messages
* [intel] Update driver to use DMA API
* [realtek] Update driver to use DMA API
* [dma] Define a DMA API to allow for non-flat device address spaces
* [malloc] Rename malloc_dma() to malloc_phys()
* [realtek] Reset NIC when closing interface if using legacy mode
* [infiniband] Allow SRP device to be described using an EFI device path
* [fcp] Allow Fibre Channel device to be described using an EFI device path
* [iscsi] Allow iSCSI device to be described using an EFI device path
* [aoe] Allow AoE device to be described using an EFI device path
* [http] Allow HTTP connection to be described using an EFI device path
* [usbblk] Allow USB block device to be described using an EFI device path
* [interface] Allow for the definition of an unused interface operation
* [ipv6] Reduce time spent waiting for router discovery
* [lacp] Ignore (and do not echo) trailing padding on received packets
* [lacp] Detect and ignore erroneously looped back LACP packets
* [usbblk] Add support for USB mass storage devices
* [usb] Move usbio driver to end of USB driver list
* [usb] Allow endpoints to be refilled to a specified upper limit
* [usb] Allow device halt to be cleared independently of host controller
* [ncm] Treat a zero divisor as indicating no alignment requirements
* [usb] Avoid integer underflow on malformed string descriptors
* [usb] Show debug message on device removal
* [usb] Reset control endpoints immediately after failure
* [pci] Update drivers to use pci_ioremap()
* [pci] Define pci_ioremap() for mapping PCI bus addresses
-------------------------------------------------------------------
Tue Sep 1 09:55:13 UTC 2020 - Dirk Mueller <dmueller@suse.com>
- update url
-------------------------------------------------------------------
Thu Aug 20 18:52:31 UTC 2020 - bwiedemann@suse.com
- Update to version 1.20.1+git20200817.ef2c844d:
* [efi] Attempt NII initialisation both with and without cable detection
* [efi] Use device path to locate filesystem from which we were loaded
* [efi] Match EDK2 numbering for USB ports
* [comboot] Fix stack pointer retrieval after COM32 binary returns
* [efi] Check the status code from AllocatePool()
* [cmdline] Add "--timeout" parameter to "ifconf" command
* [intelx] Added PCI_ROM entry for Intel x553/x557-AT and x553 (SFP+) NICs
* [intel] Set INTEL_NO_PHY_RST on i218v
* [intel] Add INTEL_NO_PHY_RST for I218LM
* [deflate] Fix typo in comment describing length codes
* [build] Fix a GNUism that FreeBSD's sed(1) cannot deal with
* [wpa] Fix erroneous debug message in wpa_derive_ptk
* [libc] Fix memcmp() to return proper values
* [pcbios] Take alignment into account when checking for available space
* [pcbios] Fix "out of memory" detection when expanding bottom area
* [libgcc] Change __divmoddi4 from int64 [unknown] to int64_t
* [build] Fix default target in sdsk image
* [dns] Use all configured DNS servers
* [xfer] Remove address family from definition of a socket opener
* [sfc] Add PCI ID for Solarflare SFC9120 and Solarflare SFC9140
* [efi] Claim SNP devices early in efi_download_start()
* [efi] Ensure NUL byte is at lowest address within stack cookie
* [efi] Distribute available entropy within stack cookie
* [libc] Add bit-rotation functions for unsigned long values
* [efi] Avoid setting direction flag on EFI platforms
* [libc] Provide an unoptimised generic_memcpy_reverse()
* [crypto] Avoid temporarily setting direction flag in bigint_is_geq()
* [usb] Leave port enabled after a failed device registration
* [axge] Reapply USB device configuration when opening network device
* [xhci] Increase link state settling delay to 100ms
* [usb] Avoid unnecessary calls to usb_hub_set_drvdata()
* [xhci] Set link state to RxDetect after disabling USB3 root hub port
* [usb] Do not attempt to disable USB3 hub ports
* [usb] Add missing usb_recycle() for completed hub interrupt transfers
* [usb] Clear device endpoint halt before resetting host endpoint
* [axge] Handle non-gigabit link speeds
* [efi] Raise TPL during driver entry point
* [efi] Detect and disable seriously broken EFI_RNG_PROTOCOL implementations
* [build] Disable position-independent code for ARM64 EFI builds
* [golan] Add explicit type casts for nodnic_queue_pair_type
* [intel] Avoid spurious compiler warning on GCC 10
* [build] Be explicit about -fcommon compiler directive
* [ocsp] Accept SHA1 certID responses even if SHA1 is not enabled
* [efi] Enable stack protection where possible
* [parseopt] Treat empty integer strings in user input as invalid
* [util] Treat empty integer strings as invalid
* [snp] Retry initialisation if link is reported as down
* [crypto] Disable MD5 as an OID-identifiable algorithm by default
* [crypto] Ensure that test code drags in required ASN.1 object identifiers
* [crypto] Allow algorithms to be included without being OID-identifiable
* [tls] Default to supporting only TLSv1.1 or above
* [tls] Allow a minimum TLS protocol version to be specified
* [efi] Attempt to connect our driver directly if ConnectController fails
* [uri] Avoid appearing to access final byte of a potentially empty string
* [efi] Work around UEFI specification bug in LoadImage for SAN boot
* [efi] Work around UEFI specification bug in LoadImage
* [png] Fix potential integer overflow
* [bnxt] Add driver support for Broadcom NetXtreme-E Adapters
* [efi] Disambiguate errors returned by ConnectController
* [int13con] Create log partition only when CONSOLE_INT13 is enabled
* [bios] Define macros for constructing partition table entries
* [iscsi] Eliminate variable-length stack allocation in URI parsing
* [iscsi] Eliminate variable-length stack allocations in CHAP handlers
* [settings] Eliminate variable-length stack allocation
* [slam] Allow for the possibility of IPv6 multicast addresses
* [slam] Eliminate variable-length stack allocation
* [infiniband] Eliminate variable-length stack allocation
* [tftp] Eliminate unnecessary variable-length stack allocation
* [travis] Ensure that most recent tag is always available
* [build] Construct full version number automatically from git revision
* [snp] Set EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit as per UEFI spec
* [snp] Try promiscuous multicast receive filter if the regular one fails
* [peerdist] Allow for the use of a hosted cache server
* [peerdist] Allow PeerDist to be globally enabled or disabled
-------------------------------------------------------------------
Tue Jul 21 13:19:27 UTC 2020 - Guillaume GARDET <guillaume.gardet@opensuse.org>
- Enable build on aarch64
-------------------------------------------------------------------
Fri Oct 25 12:34:08 UTC 2019 - Alberto Planas Dominguez <aplanas@suse.com>
- Update cross compiler to GCC 9
- Change the git address from _service to use HTTPS
- Replace %doc to %license
-------------------------------------------------------------------
Fri Oct 25 12:28:49 UTC 2019 - aplanas@suse.com
- Update to version 1.0.0+git20190929.3fe683eb:
* [lan78xx] Always enable automatic speed and duplex detection
* [efi] Do not attempt EFI_USB_IO_PROTOCOL transfers during shutdown
* [efi] Report failed control transfers as expected by the USB core
* [golan] Fix address-of-pointer bug for multicast attach/detach
* [ethernet] Avoid false positive Coverity warning
* [coverity] Override assumptions about wcrtomb() and hmac_init()
* [crypto] Profile the various stages of modular multiplication
* [crypto] Drag in configured digestInfo prefixes for any use of RSA
* [tls] Add missing call to tls_tx_resume() when restarting negotiation
* [peerdist] Limit number of concurrent raw block downloads
-------------------------------------------------------------------
Thu Sep 12 11:59:33 UTC 2019 - bwiedemann@suse.com
- Update to version 1.0.0+git20190817.0b3000bb:
* [golan] Fix address-of-pointer bug for multicast attach/detach
* [ethernet] Avoid false positive Coverity warning
* [coverity] Override assumptions about wcrtomb() and hmac_init()
* [crypto] Profile the various stages of modular multiplication
* [crypto] Drag in configured digestInfo prefixes for any use of RSA
* [tls] Add missing call to tls_tx_resume() when restarting negotiation
* [peerdist] Limit number of concurrent raw block downloads
* [peerdist] Start block download timers from within opener methods
* [process] Add PROC_INIT() for initialising static processes
* [build] Add predefined shortcut for Raspberry Pi builds
* [build] Workaround compilation error with gcc 9.1
* [build] Fix "'%s' directive argument is null" error
- Drop obsolete/upstream patches:
* ipxe-aarch64-inline-asm-const-modifier.patch
* ipxe-efi-guard-strncpy-with-gcc-warning-ignore-pragma.patch
* ipxe-efi-recognize-plt32-relocation.patch
-------------------------------------------------------------------
Tue Nov 27 07:44:32 UTC 2018 - eich@suse.com
- Make sure correct cross-gcc version is picked:
* For Leap15/SLE15: gcc7
* For oS Factory and TW: gcc8
-------------------------------------------------------------------
Fri Oct 12 15:16:39 UTC 2018 - jjolly@suse.com
- Enable bin-arm64-efi/snp.efi cross-compile build
This allows to boot an arm box from an x86_64 system.
- Add ipxe-aarch64-inline-asm-const-modifier.patch
* Fixes aarch64 build error with inline assembly output modifier
-------------------------------------------------------------------
Thu Aug 23 14:55:18 UTC 2018 - jjolly@suse.com
- Add snp-i386.efi and snp-x86_64.efi to package for using EFI's
network drivers (e.g. used by warewulf)
-------------------------------------------------------------------
Tue Aug 21 13:29:25 UTC 2018 - jjolly@suse.com
- Add ipxe-efi-recognize-plt32-relocation.patch (boo#1105510)
-------------------------------------------------------------------
Mon Jun 18 12:58:11 UTC 2018 - bwiedemann@suse.com
- Add ipxe-efi-guard-strncpy-with-gcc-warning-ignore-pragma.patch (boo#1090355)
-------------------------------------------------------------------
Sun Feb 18 12:38:31 UTC 2018 - jengelh@inai.de
- Trim redundancies. Do mention presence of EFI programs.
-------------------------------------------------------------------
Fri Feb 16 15:30:16 UTC 2018 - dmueller@suse.com
- reduce build requires
- update license
-------------------------------------------------------------------
Fri Feb 16 10:44:22 UTC 2018 - bwiedemann@suse.de
- Drop upstream 0001-arch-i386-Check-for-no-pie-gcc-option-as-well.patch
- Update to version 1.0.0+git20180203.546dd51d:
* [intel] Work around broken reset mechanism in i219 devices
* [xhci] Assume an invalid PSI table if any invalid PSI value is observed
* [ena] Fix spurious uninitialised variable warning on older versions of gcc
* [netdevice] Make netdev_irq_enabled() independent of netdev_irq_supported()
* [tg3] Add support for SerDes PHY initialization
* [skel] Remove MII interface
* [ena] Add driver for Amazon ENA virtual function NIC
* [build] Avoid use of "ld --oformat binary"
* [legal] Add missing FILE_LICENCE declarations
* [image] Omit URI query string and fragment from download progress messages
* [http] Report unsuccessful response status lines at DBGVL_LOG
* [http] Include error messages for 4xx and 5xx response codes
* [xen] Skip probing of any unsupported device types
* [intel] Add PCI device ID for X550-T2
* [http] Add support for NTLM authentication
* [http] Handle parsing of WWW-Authenticate header within authentication scheme
* [http] Gracefully handle offers of multiple authentication schemes
* [ntlm] Add support for NTLM authentication mechanism
* [crypto] Add MD4 message digest algorithm
* [crypto] Eliminate repetitions in MD5 round constant table
* [crypto] Fix endianness typo in comment
* [efi] Allow for building with older versions of elf.h system header
* [efi] Accept (and ignore) R_ARM_V4BX relocations
* [crypto] Fail fast if cross-certificate source is empty
* [efi] Inhibit our driver Start() method during disconnection attempts
* [build] Exclude selected directories from Secure Boot builds
* [efi] Continue to connect remaining handles after connection errors
* [exanic] Add PCI device ID for another X40 variant
* [exanic] Power up optical PHYs (if present)
* [dns] Ensure DNS names are NUL-terminated when used as diagnostic strings
* [efi] Match behaviour of SnpDxe for truncated received packets
* [efi] Check buffer length for packets retrieved via our SNP protocol
* [dns] Report current DNS query as job progress status message
* [resolv] Use pass-through interfaces for name resolution multiplexer
* [netdevice] Add "hwaddr" setting
* [peerdist] Gather and report peer statistics during download
* [monojob] Display job status message, if present
* [downloader] Allow underlying downloads to provide detailed job progress
* [job] Allow jobs to report an arbitrary status message
* [monojob] Check for job progress only once per timer tick
* [netdevice] Cancel all pending transmissions on any transmit error
* [efi] Raise TPL when calling UNDI entry point
* [linux] Impose receive quota on tap driver
* [malloc] Avoid false positive warnings from valgrind
* [romprefix] Avoid unaligned accesses within ROM headers
* [intel] Add various PCI device IDs
* [shell] Enable "shell" command even when BANNER_TIMEOUT is zero
* [hyperv] Do not steal ownership from the Gen 2 UEFI firmware
* [acpi] Fix spurious uninitialised-variable warning on some gcc versions
* [acpi] Compute and check checksum for ACPI tables
* [build] Fix ARM32 EFI builds with current EDK2 headers
* [build] Fix use of inline assembly on GCC 4.8 ARM64 builds
* [build] Conditionalise use of -mabi=lp64 for ARM64 builds
* [efi] Enumerate PCI BARs in same order as SnpDxe
* [lan78xx] Add driver for Microchip LAN78xx USB Ethernet NICs
* [smsc75xx] Expose functionality shared with LAN78xx devices
* [smscusb] Allow for alternative PHY register layouts
* [smscusb] Move non-inline register access functions to smscusb.c
* [virtio] Support VIRTIO_NET_F_IOMMU_PLATFORM
* [smscusb] Add ability to read MAC address from OTP
* [smsc75xx] Use common SMSC USB device functionality
* [smsc95xx] Use common SMSC USB device functionality
* [smscusb] Abstract out common SMSC USB device functionality
* [intel] Add support for I219-V in 7th Gen Intel NUC
* [tls] Support RFC5746 secure renegotiation
* [mucurses] Avoid potential division by zero
* [usb] Use non-zero language ID to retrieve strings
* [exanic] Add driver for Exablaze ExaNIC cards
* [crypto] Expose pem_asn1() for use with non-image data
* [crypto] Provide asn1_built() to construct a cursor from a builder
* [crypto] Expose asn1_grow()
* [crypto] Expose RSA_CTX_SIZE constant
* [cpuid] Allow input %ecx value to be specified
* [ecm] Display invalid MAC address strings in debug messages
* [build] Use -no-pie on newer versions of gcc
* [intel] Add INTEL_NO_PHY_RST for I219-V
* [usb] Allow for USB network devices with no interrupt endpoint
* [hdprefix] Avoid attempts to read beyond the end of the disk
* [syslog] Handle backspace characters
-------------------------------------------------------------------
Sun May 28 09:49:47 UTC 2017 - mchandras@suse.de
- Update snapshot to ipxe-1.0.0+git20170523.356f6c1b. Some of the changes are:
* [acpi] Expose ACPI tables via settings mechanism
* [efi] Provide access to ACPI tables
* [acpi] Make acpi_find_rsdt() a per-platform method
* [efi] Prevent EFI code from being linked in to non-EFI builds
* [block] Provide abstraction to allow system to be quiesced
* [intel] Do not enable ASDE on i350 backplane NIC
* [block] Allow use of a non-default EFI SAN boot filename
* [thunderx] Use ThunderxConfigProtocol to obtain board configuration
* [linux] Fix building with kernel 4.11 headers
* [build] Avoid implicit-fallthrough warnings on GCC 7
* [http] Notify data transfer interface when underlying connection is ready
* [block] Describe all SAN devices via ACPI tables
* [block] Add basic multipath support
* [vxge] Fix use of stale I/O buffer on error path
* [pcnet32] Eliminate redundant register read
* [rtl818x] Fix resource leak on error path
* [sis190] Avoid NULL pointer dereference
* [w89c840] Avoid potential array overrun
* [tcp] Use correct length for memset()
* [usb] Use correct length for memcpy()
* [ath] Add missing break statements
* [infiniband] Return status code from ib_create_mi()
* [infiniband] Return status code from ib_create_cq() and ib_create_qp()
* [mucurses] Attempt to fix resource leaks
* [mucurses] Attempt to fix keypress processing logic
* [mucurses] Attempt to fix test for empty string
* [802.11] Remove redundant NULL pointer check after dereference
* [nfs] Fix double free bug on error path
* [xfer] Ensure va_end() is called on failure path
* [arbel] Avoid potential integer overflow when calculating memory mappings
* [hermon] Avoid potential integer overflow when calculating memory mappings
* [thunderx] Don't disable NIC when exiting from iPXE
* [thunderx] Fix hardware deinitialization
* [http] Cleanly shut down potentially looped interfaces
* [intel] Add INTEL_NO_PHY_RST for I219-LM (2)
* [int13] Test correct return status from INT 13 calls
* [int13] Avoid potential division by zero
* [pic8259] Fix definitions for "read IRR" and "read ISR" commands
* [cloud] Show CPU vendor and model in example cloud boot scripts
* [netdevice] Allow MTU to be changed at runtime
* [virtio] Use host-specified MTU when available
* [virtio] Use separate RX and TX empty header buffers
* [virtio] Remove queue size limit in legacy virtio
* [virtio] Simplify virtqueue shutdown
* [virtio] Cap queue size to MAX_QUEUE_NUM
- Add patch to enable -no-pie when building i386 binaries. This was only
triggered recently since the gcc-7.1.1 started using -fpie by default
* 0001-arch-i386-Check-for-no-pie-gcc-option-as-well.patch
-------------------------------------------------------------------
Thu Sep 1 15:34:40 UTC 2016 - mchandras@suse.de
- Initial commit. We only build and package the iPXE boot images for now
Reference in New Issue View Git Blame Copy Permalink