pool/librecad
SHA256
4
0
Fork 2
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
librecad/librecad.changes
Jan Engelhardt 495439ce39 - Update to release 2.2.1.1: 
See: https://github.com/LibreCAD/LibreCAD/compare/2.2.0.2...v2.2.1.1
- Drop librecad-use-system-libdxfrw.patch
  libdxfrw is abondoned. Use the internal one instead.

OBS-URL: https://build.opensuse.org/package/show/graphics/librecad?expand=0&rev=79
2025-02-28 10:34:17 +00:00

395 lines
16 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

-------------------------------------------------------------------
Fri Feb 28 08:39:22 UTC 2025 - Jiri Slaby <jslaby@suse.cz>
- Update to release 2.2.1.1:
See: https://github.com/LibreCAD/LibreCAD/compare/2.2.0.2...v2.2.1.1
- Drop librecad-use-system-libdxfrw.patch
libdxfrw is abondoned. Use the internal one instead.
-------------------------------------------------------------------
Mon Sep 4 07:00:05 UTC 2023 - Paolo Stivanin <info@paolostivanin.com>
- Update to release 2.2.0.2:
* fixes an undetected vulnerability when opening malformed LFF
font files that caused a crash
* fixes format issues in bundled fonts
* fixes regression, finding nearest points on ellipses caused a crash
* plugin Importshp has been removed
- Drop librecad-use-system-shapelib.patch since the plugin has been
removed.
- Rebase patches.
-------------------------------------------------------------------
Sun Feb 19 12:10:12 UTC 2023 - Jan Engelhardt <jengelh@inai.de>
- Update to release 2.2.0 [boo#1208447]
* many causes of crashes have been eliminated
* eliminated DWG issues in libdxfrw, which caused several crashes
* the performance of panning and zooming in large files has
been significantly improved
* the undo/redo engine has been completely revised due to
several problems
* adjustments for new compiler and Qt versions were required
* extension of the command line, multi-line commands, paste and
open command files
* improvement of the print preview, with tiled printing and
line widths adjustment
* multiple selection and bulk actions in block and layer lists
-------------------------------------------------------------------
Mon Jul 11 18:48:45 UTC 2022 - Dirk Müller <dmueller@suse.com>
- update to 2.2.0 rc4:
* symbols to unicode.lff
* new error code from libdxfrw update
* build Windows, MacOS and Linux packages in one action
* added tool tips to Categories tool widget (#1519)
* added @ symbol to relative coordinates in status bar (#1452)
* changed misleading unit label in curent drawing preferences (#1453)
* changed tab order in text dialog (#1432)
* maximum size of status bar for hidpi displays
* sync libdxfrw (072aecd)
* copy/rename media files in desktop folder to remove whitespaces
* fixed renaming of nested blocks (#1527)
* preserve list position in block and layer list (#1515)
* fixed polyline issue when line type was changed (#1496)
* add minutes label to auto save time in application preferences (#1412)
* add files saved as with new name to recent files (#1364)
* snap on middle point failed for spline through points (#1395)
* spline issue with tolerance on ascii to double conversion
* DXF viewport reading issue by updating libdxfrw
* status bar height toggling on auto save
* solid fill hatch issues
* Ukrainian and symbol characters in unicode.lff
* possible out of bounds read with MText entities
* AppImage was broken by fix for (#1488)
* wrong translations folder for additionals paths from settings
* getDirectoryList() failed on Linux when librecad is in $PATH (#1488)
* bounds check in LWPolyline
* NULL check for hatch code 93
* vulnerabilities in JWW parser
- drop 0001-Added-bounds-checking-to-CDataMoji-in-jww-parser.patch,
0001-Added-bounds-check-to-CDataList-in-JWW-parser.patch
0001-fixed-1488-getDirectoryList-failed-on-Linux-when-lib.patch: upstream
-------------------------------------------------------------------
Mon May 16 20:31:43 UTC 2022 - Jan Engelhardt <jengelh@inai.de>
- Add 0001-Added-bounds-checking-to-CDataMoji-in-jww-parser.patch
[boo#1195105] [CVE-2021-45341]
- Add 0001-Added-bounds-check-to-CDataList-in-JWW-parser.patch
[boo#1195122] [CVE-2021-45342]
-------------------------------------------------------------------
Wed May 4 09:21:59 UTC 2022 - Marcus Meissner <meissner@suse.com>
- switch source urls to https
-------------------------------------------------------------------
Wed Mar 30 11:38:49 UTC 2022 - Jan Engelhardt <jengelh@inai.de>
- Strip excess blank fields from librecad.desktop:MimeType
[boo#1197664]
-------------------------------------------------------------------
Sun Jan 23 22:41:25 UTC 2022 - Jan Engelhardt <jengelh@inai.de>
- Replace "qt4" in description, the build does not use Qt4 anymore.
-------------------------------------------------------------------
Thu Jan 6 11:44:32 UTC 2022 - Jiri Slaby <jslaby@suse.cz>
- replace the revert by an upstream fix
* add 0001-fixed-1488-getDirectoryList-failed-on-Linux-when-lib.patch
* remove
0001-Revert-AppImage-build-on-GitHub-Actions-with-go-appi.patch
0002-Revert-RS_System-getDirectoryList-add-plugins-folder.patch
0003-Revert-fix-RS_System-getDirectoryList-use-relative-p.patch
-------------------------------------------------------------------
Sat Jan 1 16:38:27 UTC 2022 - Jiri Slaby <jslaby@suse.cz>
- fix paths creation (e.g. fonts loading) by:
* 0001-Revert-AppImage-build-on-GitHub-Actions-with-go-appi.patch
* 0002-Revert-RS_System-getDirectoryList-add-plugins-folder.patch
* 0003-Revert-fix-RS_System-getDirectoryList-use-relative-p.patch
(did the revert and waiting for the upstream fix)
-------------------------------------------------------------------
Mon Dec 20 09:15:40 UTC 2021 - Jiri Slaby <jslaby@suse.cz>
- update to 2.2.0-rc3
* major release
* DWG imports are more reliable now
* and a lot more of bugfixes and improvements
- remove (they are in upstream now)
* 0001-fix-build-with-gcc-9.patch
* add-boost-tuple-include-to-fix-build.patch
* ensured-all-objects-are-shown-when-a-layer-is-toggle.patch
* fix-build-with-Qt-5.11.patch
* fix-build-with-Qt-5.15.patch
- remove qcad provides/obsoletes -- it's an ancient history
-------------------------------------------------------------------
Tue May 4 07:30:44 UTC 2021 - Jiri Slaby <jslaby@suse.cz>
- add add-boost-tuple-include-to-fix-build.patch
-------------------------------------------------------------------
Sun Jun 7 22:55:24 UTC 2020 - Jan Engelhardt <jengelh@inai.de>
- Add fix-build-with-Qt-5.15.patch. Set CFLAGS+=-fcommon.
-------------------------------------------------------------------
Tue May 28 09:05:54 UTC 2019 - Jiri Slaby <jslaby@suse.com>
- add 0001-fix-build-with-gcc-9.patch
-------------------------------------------------------------------
Mon Jun 11 09:02:23 UTC 2018 - jslaby@suse.com
- add fix-build-with-Qt-5.11.patch
-------------------------------------------------------------------
Wed Feb 1 13:09:28 UTC 2017 - adam.majer@suse.de
- use individual libboost-*-devel packages instead of boost-devel
-------------------------------------------------------------------
Sat Oct 8 13:24:33 UTC 2016 - jslaby@suse.com
- add: ensured-all-objects-are-shown-when-a-layer-is-toggle.patch
(from upstream)
-------------------------------------------------------------------
Tue Sep 27 07:41:18 UTC 2016 - jengelh@inai.de
- Update to new upstream release 2.1.3
* The Shift key had no effect and would not activate the
command line.
-------------------------------------------------------------------
Mon Sep 19 12:47:21 UTC 2016 - jslaby@suse.com
- Update to new upstream release 2.1.2
* wouldn't build with gcc 5.4 and 6
* mouse cursor was missing for 'Arc Tangential'
* right-click with plugins could cause a crash
* construction lines were not drawn when the line segment was out of view
* DXF files with comments were not properly loaded
* drawings were not marked as modified after an 'undo'
* the command line didn't accept numpad input
* the command widget didn't activate properly when floating
- librecad-gcc6.patch: Remove (unneeded now)
-------------------------------------------------------------------
Tue Jun 28 11:54:10 UTC 2016 - jengelh@inai.de
- Update to new upstream release 2.1.1
* Bugfixes:
* draft mode was not set for new/opened drawings
* performance did not improve when zooming into an area
* certain polylines were not rendered properly
* opening a file didn't restore the layer's construction state
* the cursor was hidden for 'polyline from existing'
* closing an inactive tab cleared the layer list
-------------------------------------------------------------------
Fri Jun 17 10:21:20 UTC 2016 - jslaby@suse.com
- add librecad-gcc6.patch
-------------------------------------------------------------------
Tue Jun 7 07:51:47 UTC 2016 - jslaby@suse.com
- Update to new upstream release 2.1.0
* new features
* lot of bug fixes
* other changes
* see full changelog at:
https://github.com/LibreCAD/ChangeLogs/blob/master/developers/r-a-v-a-s/2-1/2-1-0/2-1-0.md
-------------------------------------------------------------------
Tue May 24 10:32:20 UTC 2016 - jengelh@inai.de
- Update to new upstream release 2.0.11
* Updated translations. Added non-uniform knots support.
* Added Edit - Device Options.
* Eliminated crash on save when auto backup is off.
* Eliminated invalid bounding boxes from auto zoom.
-------------------------------------------------------------------
Mon May 16 13:04:14 UTC 2016 - jslaby@suse.com
- Update to new upstream release 2.0.10:
* the Arch paper sizes were not properly supported
* the pen toolbar was wider than necessary on super HD displays
* various memory leaks
* build error when using boost version greater than 1.53
* auto-save could not really be turned off
* file dialog always opened with DXF, instead of the last chosen file type
* the statusbar and statusbar font were not allowed to autosize
* the fixed extension line length option was not working for dimensions
* the program would crash after: modify action -> undo -> repeat modify
action
-------------------------------------------------------------------
Mon Jan 18 07:43:39 UTC 2016 - jslaby@suse.com
- Update to new upstream release 2.0.9:
* Mostly a bug fixing release
* Fixed a few crashes due to undo and deleted entities
* More at:
http://forum.librecad.org/2-0-9-released-td5712809.html
-------------------------------------------------------------------
Wed Sep 9 21:03:17 UTC 2015 - asterios.dramis@gmail.com
- Update to new upstream release 2.0.8:
* DWG read support.
* SVG export support.
* Arabic Language GUI support. More work is needed for:
Right-to-left support for Text entities.
Arabic fonts for Text.
* More user configurable settings in App Preferences.
* Many fixes and enhancements, see:
http://forum.librecad.org/2-0-8-released-td5712049.html
for details.
- Added new Part Library:
Electrical1-LCAD.zip
- Rebased librecad-install.diff, librecad-no-date.diff and
librecad-use-system-libdxfrw.patch to apply cleanly.
- Added a patch "librecad-use-system-shapelib.patch" to use the
system shapelib instead of the bundled one and new build
requirement libshp-devel (for openSUSE > 13.2).
- Update includes the fix for boo#937874.
-------------------------------------------------------------------
Thu Apr 30 01:00:13 UTC 2015 - crrodriguez@opensuse.org
- Switch to QT5 for Factory builds.
-------------------------------------------------------------------
Sat Jan 31 22:21:05 UTC 2015 - asterios.dramis@gmail.com
- Update to new upstream release 2.0.7:
* A serious command line regression since 2.0.6 was fixed:
keyboard Enter/Esc support, command line widget in a second
screen, etc. Also fixed are some crashes for tangential circle
drawing and polyline addition.
* Improved LFF font support
* The command line can be used as a calculator by typing math
expression after command “cal”. For example, command "cal 1+1"
to get output "2"
* Many fixes and enhancements, see:
http://blog.librecad.org/
for details
From version 2.0.5:
* Interpolation spline. Draw->Spline->Spline Points.
* File -> Export as PDF.
* Korean language support.
* Smooth scrolling/zooming
* Work-in-progress, finding enclosed area within a contour.
* “Modify->Round” renamed to “Modify->Fillet”.
* Command line aliases can be made for both regular commands and
short commands.
- Added new Part Libraries:
Architect8-LCAD.zip and Electronics8-LCAD.zip.
- Added new build requirement unzip.
- Rebased librecad-install.diff and
librecad-use-system-libdxfrw.patch to apply cleanly.
-------------------------------------------------------------------
Wed Aug 13 18:36:35 UTC 2014 - asterios.dramis@gmail.com
- Update to new upstream release 2.0.4:
* Windows and OS/X printer dialog fails to appear when running Qt5;
* A patched version of muparser is used by default for OS/X and win32;
* Update layer for selected entities when a layer is selected
* Plotting/drawing mathematical equations by smallfix
* Draw circle by 2 points and radius
* PIC file importer by cgrzemba
* Update layer for selected entities when a layer is selected by ajisaacs
* Lots of shortcut fixes by thomas
* Arc angle updates for negative z-axis by coryjc190
* Drawing order regression in 2.0.3
- Rebased librecad-use-system-libdxfrw.patch to apply cleanly.
-------------------------------------------------------------------
Sun May 4 19:21:39 UTC 2014 - asterios.dramis@gmail.com
- Update to new upstream release 2.0.2:
* Some notable changes visible to users:
+ Reworked snapping system to allow simultaneous multiple snapping options;
snapping of equidistant middle points;
+ Helping/scratch layer support. Straight lines are kept infinite and
entities are skipped in printout;
+ Isometric grids;
+ Architectural tick;
+ Support of new ellipse features missing in version 1.0, such as,
intersection, middle point, arc length, and tangential direction;
+ Several new drawing features for line, circle, and ellipse;
+ Improved localization, translation for plugins and standard dialogs;
+ Support for a general factor for drawing size dimensions to help scaled
drawings;
+ Revert entities direction, developed by effad;
+ Some UI tweaking;
+ Windows setup registration to add LC in Windows Control Panel ‘Programs
and Features’.
* LibreCAD-2.0 is using a new dxfrw library to handle the DXF file format,
and some advantage of the dxfrw library brings are:
+ New dxf library supporting ascii and binary files, more versions and
fully compatible with the specification;
+ Support of templates;
+ Dimensions: support for aligned / horizontal text;
+ Dimensions: added general scale property;
+ Added support for single line text.
* Some internal changes since LibreCAD-1.0 series:
+ Removed Qt3 dependency;
+ Reworked methods to calculate intersections to simplify support for new
entity types;
+ Improved many drawing algorithms for performance;
+ Added scripts to allow automatic building on OS/X and Windows;
+ Added boost and C++11 support ;
+ Various code review and bug fixes.
* See http://blog.librecad.org/ for more details.
- Updated License to GPL-2.0 and (Apache-2.0 or
SUSE-GPL-3.0+-with-font-exception).
- Added a man page (ttf2lff.1) for the ttf2lff program.
- Removed bash, dxflib-devel and libqt4-devel-doc build requirements (not
needed anymore).
- Added new build requirements boost-devel, libdxfrw-devel and
wqy-microhei-fonts.
- Added mime_database_post/mime_database_postun entries sice the package
installs a mime file.
- Rebased librecad-no-date.diff to apply cleanly.
- Removed the following patches (not needed anymore):
* librecad-dxflib25.diff
* librecad-external-dxflib.diff
- Added the following patches (taken from Fedora):
* librecad-use-system-libdxfrw.patch (Use system libdxfrw)
-------------------------------------------------------------------
Sun Jun 23 18:46:58 UTC 2013 - asterios.dramis@gmail.com
- Update to new upstream release 1.0.3:
* Bugfix release.
- Removed librecad.mime.desktop file (not needed since dxf is part
of the shared-mime-info database). Removed also the respective
update-mime-database post/postun entries.
- Added desktop_database_post/desktop_database_postun entries
since the package defines a MIME handler.
-------------------------------------------------------------------
Sat May 5 22:10:23 UTC 2012 - jengelh@medozas.de
- Update to new upstream release 1.0.2
* replaces dependency on fparser library by
license-compatible muparser
-------------------------------------------------------------------
Tue Oct 18 01:26:37 UTC 2011 - jengelh@medozas.de
- Initial package for build.opensuse.org
Reference in New Issue View Git Blame Copy Permalink