# # spec file for package libvirt # # Copyright (c) 2016 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # # The configuration of libvirt is modified slightly for SLE %define with_sle_build %{?is_opensuse:0}%{!?is_opensuse:1} # openSUSE13.1 and 13.2 do not understand %is_opensuse. Check for those # explicitly and disable SLE build %if 0%{?suse_version} == 1310 || 0%{?suse_version} == 1320 %define with_sle_build 0 %endif # The hypervisor drivers that run in libvirtd %define with_xen 0%{!?_without_xen:1} %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:1} %define with_uml 0%{!?_without_uml:1} %define with_libxl 0%{!?_without_libxl:1} %define with_vbox 0%{!?_without_vbox:1} # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:1} %define with_vmware 0%{!?_without_vmware:1} %define with_phyp 0%{!?_without_phyp:0} %define with_esx 0%{!?_without_esx:1} %define with_hyperv 0%{!?_without_hyperv:0} # Then the secondary host drivers, which run inside libvirtd %define with_storage_rbd 0%{!?_without_storage_rbd:0} %define with_storage_sheepdog 0 %define with_storage_gluster 0 %define with_apparmor 0%{!?_without_apparmor:1} # Optional bits on by default %define with_sanlock 0%{!?_without_sanlock:1} %define with_polkit_rules 1 # A few optional bits off by default, we enable later %define with_cgconfig 0%{!?_without_cgconfig:0} %define with_systemd 0%{!?_without_systemd:0} %define with_numactl 0%{!?_without_numactl:0} %define with_numad 0%{!?_without_numad:0} %define with_firewalld 0%{!?_without_firewalld:0} %define with_wireshark 0%{!?_without_wireshark:0} # Xen no longer contains xm/xend so disable building the legacy Xen driver %define with_xen 0 # Set the OS / architecture specific special cases # Xen is available only on x86_64 and arm %ifnarch x86_64 %arm aarch64 %define with_xen 0 %define with_libxl 0 %endif # For SLE, further restrice Xen support to x86_64 only %if %{with_sle_build} %ifarch %arm aarch64 %define with_xen 0 %define with_libxl 0 %endif %endif # Enable numactl for most architectures. Handle aarch64 separately %ifnarch s390 s390x %arm %ix86 aarch64 %define with_numactl 0%{!?_without_numactl:1} %endif # For aarch64, numactl is only available on newer than 1320, or SLE12 # family newer than 120100 %ifarch aarch64 %if 0%{?suse_version} > 1320 || ( 0%{?suse_version} == 1315 && ( 0%{?sle_version} > 120100 ) ) %define with_numactl 0%{!?_without_numactl:1} %endif %endif # vbox is available only on i386 x86_64 %ifnarch %{ix86} x86_64 %define with_vbox 0 %endif # Disable hypervisor drivers not supported in SLE %if %{with_sle_build} %define with_openvz 0 %define with_vbox 0 %define with_uml 0 %define with_vmware 0 %define with_hyperv 0 %endif # Enable phyp driver for IBM Power systems %ifarch ppc64 %define with_phyp 1 %endif # rbd enablement is a bit tricky. For x86_64 %ifarch x86_64 # enable on anything newer than 1320, or SLE12 family newer than 120100 # use librbd-devel as build dependency %if 0%{?suse_version} > 1320 || ( 0%{?suse_version} == 1315 && ( 0%{?sle_version} > 120100 ) ) %define with_storage_rbd 0%{!?_without_storage_rbd:1} %define with_rbd_lib librbd-devel %endif # enable for SLE12 family <= 120100 (SLE12GA/SP1, Leap 42.1) # use ceph-devel as build dependency %if 0%{?suse_version} == 1315 && 0%{?sle_version} <= 120100 %define with_storage_rbd 0%{!?_without_storage_rbd:1} %define with_rbd_lib ceph-devel %endif %endif # For arm %ifarch aarch64 # enable on anything newer than 1320, or SLE12 family newer than 120100 # use librbd-devel as build dependency %if 0%{?suse_version} > 1320 || ( 0%{?is_opensuse} == 0 && 0%{?sle_version} > 120100 ) %define with_storage_rbd 0%{!?_without_storage_rbd:1} %define with_rbd_lib librbd-devel %endif %endif # Support systemd on 12.1 and later %if 0%{?suse_version} >= 1210 %define with_systemd 0%{!?_without_systemd:1} %endif # libvirt commit 37397320 changed the configure check for wireshark to # use pkgconfig, but our wireshark packages do not provide wireshark.pc. # Disable the dissector for now %define with_wireshark 0 # numad is used to manage the CPU and memory placement dynamically for # qemu, lxc, and uml drivers %if %{with_qemu} || %{with_lxc} || %{with_uml} # Enable numad for most architectures. Handle aarch64 separately %ifnarch s390 s390x %arm %ix86 aarch64 %define with_numad 0%{!?_without_numad:1} %endif # For aarch64, enable on anything newer than 1320, or SLE12 family newer # than 120100 %ifarch aarch64 %if 0%{?suse_version} > 1320 || ( 0%{?suse_version} == 1315 && 0%{?sle_version} > 120100 ) %define with_numad 0%{!?_without_numad:1} %endif %endif %endif # Force QEMU to run as qemu:qemu %define qemu_user qemu %define qemu_group qemu # Pull in cgroups config system %if %{with_qemu} || %{with_lxc} %define with_cgconfig 0%{!?_without_cgconfig:1} %endif %define _fwdefdir /etc/sysconfig/SuSEfirewall2.d/services Name: libvirt Url: http://libvirt.org/ Version: 2.0.0 Release: 0 Summary: Library providing a simple virtualization API License: LGPL-2.1+ Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif %if %{with_uml} Requires: libvirt-daemon-driver-uml = %{version}-%{release} %endif %if %{with_xen} Requires: libvirt-daemon-driver-xen = %{version}-%{release} %endif %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-client = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM BuildRequires: autoconf BuildRequires: automake BuildRequires: gettext-tools BuildRequires: libtool # Needed for virkmodtest in 'make check' BuildRequires: modutils %if %{with_systemd} BuildRequires: systemd BuildRequires: pkgconfig(systemd) %endif %if %{with_xen} || %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: fdupes BuildRequires: libattr-devel BuildRequires: libgcrypt-devel BuildRequires: libgnutls-devel BuildRequires: libtasn1-devel BuildRequires: libxml2-devel BuildRequires: libxslt BuildRequires: ncurses-devel BuildRequires: perl BuildRequires: python BuildRequires: python-xml BuildRequires: readline-devel BuildRequires: xhtml-dtd # perl XPath is needed since we have a patch touching files that cause # hvsupport.html to be regenerated BuildRequires: perl(XML::XPath) # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 BuildRequires: libpciaccess0-devel >= 0.10.9 BuildRequires: libudev-devel >= 145 BuildRequires: libyajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libavahi-devel BuildRequires: libnl3-devel BuildRequires: libpcap-devel BuildRequires: libselinux-devel %if %{with_apparmor} BuildRequires: libapparmor-devel %endif BuildRequires: dnsmasq >= 2.41 BuildRequires: iptables # TODO BuildRequires: iptables-ipv6 BuildRequires: cyrus-sasl-devel BuildRequires: ebtables BuildRequires: polkit >= 0.93 BuildRequires: polkit-devel >= 0.93 BuildRequires: radvd # For mount/umount in FS driver BuildRequires: util-linux # For LVM drivers BuildRequires: lvm2 # For ISCSI driver BuildRequires: open-iscsi # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel %if %{with_storage_rbd} BuildRequires: %{with_rbd_lib} %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: libnuma-devel %endif BuildRequires: fuse-devel >= 2.8.6 BuildRequires: libcap-ng-devel >= 0.5.0 BuildRequires: libnetcontrol-devel >= 0.2.0 BuildRequires: libssh2-devel %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.2.3 %endif BuildRequires: audit-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} BuildRequires: wireshark-devel %endif %if %{with_qemu} # BuildRequire qemu-tools so configure can detect qemu-bridge-helper # path. BuildRequires: qemu-tools %endif Source0: %{name}-%{version}.tar.xz Source1: %{name}-%{version}.tar.xz.asc Source2: %{name}.keyring Source3: libvirtd.init Source4: libvirtd-relocation-server.fw Source99: baselibs.conf Source100: %{name}-rpmlintrc # Upstream patches Patch0: c8f08e48-systemd-notify-fix.patch # Patches pending upstream review Patch100: libxl-dom-reset.patch Patch101: pci-use-driver-override-sysfs.patch # Need to go upstream Patch150: xen-pv-cdrom.patch Patch151: blockcopy-check-dst-identical-device.patch Patch152: libvirt-power8-models.patch Patch153: ppc64le-canonical-name.patch Patch154: libxl-set-migration-constraints.patch Patch155: libxl-set-cach-mode.patch Patch156: apparmor-fixes.patch Patch157: apparmor-qemu-bridge-helper.patch # Our patches Patch200: libvirtd-defaults.patch Patch201: libvirtd-init-script.patch Patch202: libvirt-guests-init-script.patch Patch203: virtlockd-init-script.patch Patch204: virtlogd-init-script.patch Patch205: suse-qemu-conf.patch Patch206: support-managed-pci-xen-driver.patch Patch207: systemd-service-xen.patch Patch208: xen-sxpr-disk-type.patch Patch209: libxl-support-block-script.patch Patch210: apparmor-no-mount.patch Patch211: qemu-apparmor-screenshot.patch Patch212: libvirt-suse-netcontrol.patch Patch213: lxc-wait-after-eth-del.patch Patch214: libxl-qemu-emulator-caps.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build %description Libvirt is a C toolkit to interact with the virtualization capabilities of Linux. Virtualization of the Linux Operating System means the ability to run multiple instances of Operating Systems concurrently on a single hardware system where the basic resources are driven by a Linux instance. The library aims to provide long term stable C API to interact with Linux virtualization technologies. Authors: -------- Daniel Veillard Karel Zak %package doc Summary: API reference and website documentation Group: Development/Libraries/C and C++ %description doc Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library Group: Development/Libraries/C and C++ # All runtime requirements for the libvirt package (runtime requirements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs and virsh are in a subpackage Requires: %{name}-client = %{version}-%{release} # for modprobe of pci devices Requires: modutils # for /sbin/ip & /sbin/tc Requires: bridge-utils Requires: iproute Requires: logrotate Requires: udev >= 145 Recommends: polkit >= 0.93 %ifarch i386 i586 i686 x86_64 ia64 # For virConnectGetSysinfo Requires: dmidecode %endif %if %{with_systemd} # For service management %{?systemd_requires} %endif %if %{with_numad} Requires: numad %endif %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for the libvirt daemon, used for cleaning guest network traffic. %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: dnsmasq >= 2.41 Requires: iptables # TODO Requires: iptables-ipv6 Requires: libvirt-daemon = %{version}-%{release} Requires: radvd %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: A nwfilter driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: ebtables Requires: iptables # TODO Requires: iptables-ipv6 Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the network interface APIs using the netcontrol library %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage Summary: Storage driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %endif # For LVM drivers Requires: lvm2 # For ISCSI driver Requires: open-iscsi # For disk driver Requires: device-mapper Requires: parted # For multipath support Requires: device-mapper %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: Qemu driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: /usr/bin/qemu-img Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} # For image compression Requires: bzip2 Requires: gzip Requires: lzop Requires: qemu Requires: xz %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU. %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_uml} %package daemon-driver-uml Summary: Uml driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-uml The UML driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using User Mode Linux %endif %if %{with_xen} %package daemon-driver-xen Summary: Xen driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-xen The Xen driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Xen. %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using libxl. %endif %if %{with_qemu} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU emulators %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_uml} %package daemon-uml Summary: Server side daemon & driver required to run UML guests Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-uml = %{version}-%{release} %description daemon-uml Server side daemon and driver required to manage the virtualization capabilities of UML %endif %if %{with_xen} || %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} %if %{with_xen} Requires: libvirt-daemon-driver-xen = %{version}-%{release} %endif %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests Group: Development/Libraries/C and C++ Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: virtualbox %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side library and utilities of the libvirt library Group: Development/Libraries/C and C++ Requires: ncurses Requires: readline # So remote clients can access libvirt over SSH tunnel # (client invokes 'nc' against the UNIX socket on the server) Requires: netcat-openbsd # Needed by libvirt-guests init script. Requires: gettext-runtime # Needed by virt-pki-validate script. Requires: cyrus-sasl Requires: gnutls # Not technically required, but makes 'out-of-box' config # work correctly & doesn't have onerous dependencies Requires: cyrus-sasl-digestmd5 %description client Shared libraries and client binaries needed to access to the virtualization capabilities of recent versions of Linux (and other OSes). %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Group: Development/Libraries/C and C++ Requires: %{name}-client = %{version}-%{release} Requires: %{name}-doc = %{version}-%{release} Requires: pkg-config %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package lock-sanlock Summary: Sanlock lock manager plugin for QEMU driver Group: Development/Libraries/C and C++ Requires: sanlock >= 2.4 # for virt-sanlock-cleanup require augeas Requires: %{name}-client = %{version}-%{release} Requires: %{name}-daemon = %{version}-%{release} Requires: augeas %description lock-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %if %{with_wireshark} %package -n wireshark-plugin-libvirt Summary: Wireshark plugin for libvirt RPC protocol Group: Productivity/Networking/Diagnostic Requires: %{name}-client = %{version}-%{release} Requires: wireshark %description -n wireshark-plugin-libvirt Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %package nss Summary: Libvirt plugin for Name Service Switch Group: Development/Libraries/C and C++ Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss libvirt plugin for NSS for translating domain names into IP addresses. %prep %setup -q %patch0 -p1 %patch100 -p1 %patch101 -p1 %patch150 -p1 %patch151 -p1 %patch152 -p1 %patch153 -p1 %patch154 -p1 %patch155 -p1 %patch156 -p1 %patch157 -p1 %patch200 -p1 %patch201 -p1 %patch202 -p1 %patch203 -p1 %patch204 -p1 %patch205 -p1 %patch206 -p1 %patch207 -p1 %patch208 -p1 %patch209 -p1 %patch210 -p1 %patch211 -p1 %patch212 -p1 %patch213 -p1 %patch214 -p1 %build %if %{with_xen} %define arg_xen --with-xen %else %define arg_xen --without-xen %endif %if %{with_qemu} %define arg_qemu --with-qemu %else %define arg_qemu --without-qemu %endif %if %{with_openvz} %define arg_openvz --with-openvz %else %define arg_openvz --without-openvz %endif %if %{with_lxc} %define arg_lxc --with-lxc %else %define arg_lxc --without-lxc %endif %if %{with_vbox} %define arg_vbox --with-vbox %else %define arg_vbox --without-vbox %endif %if %{with_uml} %define arg_uml --with-uml %else %define arg_uml --without-uml %endif %if %{with_phyp} %define arg_phyp --with-phyp %else %define arg_phyp --without-phyp %endif %if %{with_esx} %define arg_esx --with-esx %else %define arg_esx --without-esx %endif %if %{with_vmware} %define arg_vmware --with-vmware %else %define arg_vmware --without-vmware %endif %if %{with_hyperv} %define arg_hyperv --with-hyperv %else %define arg_hyperv --without-hyperv %endif %if %{with_libxl} %define arg_libxl --with-libxl %else %define arg_libxl --without-libxl %endif %if %{with_storage_rbd} %define arg_storage_rbd --with-storage-rbd %else %define arg_storage_rbd --without-storage-rbd %endif %if %{with_storage_sheepdog} %define arg_storage_sheepdog --with-storage-sheepdog %else %define arg_storage_sheepdog --without-storage-sheepdog %endif %if %{with_storage_gluster} %define arg_storage_gluster --with-storage-gluster %else %define arg_storage_gluster --without-storage-gluster %endif %if %{with_numactl} %define arg_numactl --with-numactl %else %define arg_numactl --without-numactl %endif %if %{with_numad} %define arg_numad --with-numad %else %define arg_numad --without-numad %endif %if %{with_apparmor} %define arg_apparmor --with-apparmor %define arg_apparmor_profiles --with-apparmor-profiles %else %define arg_apparmor --without-apparmor %endif %if %{with_sanlock} %define arg_sanlock --with-sanlock %else %define arg_sanlock --without-sanlock %endif %if %{with_systemd} %define arg_init_script --with-init-script=systemd %else %define arg_init_script --with-init-script=redhat %endif %if %{with_firewalld} %define arg_firewalld --with-firewalld %else %define arg_firewalld --without-firewalld %endif %if %{with_wireshark} %define arg_wireshark --with-wireshark-dissector %else %define arg_wireshark --without-wireshark-dissector %endif %define arg_selinux_mount --with-selinux-mount="/selinux" # x86_64 UEFI firmwares # To more closely resemble actual hardware, we use the firmwares with # embedded Microsoft keys LOADERS="/usr/share/qemu/ovmf-x86_64-ms-code.bin:/usr/share/qemu/ovmf-x86_64-ms-vars.bin" # aarch64 UEFI firmwares LOADERS="$LOADERS:/usr/share/qemu/aavmf-aarch64-code.bin:/usr/share/qemu/aavmf-aarch64-vars.bin" %define arg_loader_nvram --with-loader-nvram="$LOADERS" autoreconf -f -i export CFLAGS="$RPM_OPT_FLAGS" %configure --disable-static --with-pic \ %{?arg_xen} \ %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ --with-sasl \ --with-avahi \ --with-polkit \ --with-libvirtd \ %{?arg_uml} \ %{?arg_phyp} \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ --without-xenapi \ --without-vz \ --without-bhyve \ --with-interface \ --with-network \ --with-storage-fs \ --with-storage-lvm \ --with-storage-iscsi \ --with-storage-disk \ --with-storage-mpath \ %{?arg_storage_rbd} \ %{?arg_storage_sheepdog} \ %{?arg_storage_gluster} \ %{?arg_numactl} \ %{?arg_numad} \ --with-capng \ --with-fuse \ --without-netcf \ --with-netcontrol \ --with-selinux \ %{?arg_selinux_mount} \ %{?arg_apparmor} \ %{?arg_apparmor_profiles} \ --with-udev \ --with-yajl \ %{?arg_sanlock} \ --with-libpcap \ --with-macvtap \ --with-audit \ --with-dtrace \ --with-driver-modules \ %{?arg_firewalld} \ %{?arg_wireshark} \ --with-nss-plugin \ --libexecdir=%{_libdir}/%{name} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ %{?arg_loader_nvram} \ --without-login-shell \ %{arg_init_script} \ ac_cv_path_MODPROBE=/sbin/modprobe \ ac_cv_path_UDEVADM=/sbin/udevadm \ ac_cv_path_SHOWMOUNT=/usr/sbin/showmount make V=1 %{?jobs:-j%jobs} DOCS_DIR=%{_docdir}/%{name}-python EXAMPLE_DIR=%{_docdir}/%{name}-python/examples HTML_DIR=%{_docdir}/%{name} gzip -9 ChangeLog %install %makeinstall SYSTEMD_UNIT_DIR=%{_unitdir} DOCS_DIR=%{_docdir}/%{name}-python EXAMPLE_DIR=%{_docdir}/%{name}-python/examples HTML_DIR=%{_docdir}/%{name} make -C examples distclean cp examples/lxcconvert/virt-lxc-convert $RPM_BUILD_ROOT%{_bindir} rm -f $RPM_BUILD_ROOT%{_libdir}/*.la %if %{with_wireshark} rm -f $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/*/libvirt.la mv $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/*/libvirt.so \ $RPM_BUILD_ROOT%{_libdir}/wireshark/plugins/libvirt.so %endif rm -f $RPM_BUILD_ROOT%{_libdir}/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/%{name}/lock-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/%{name}/lock-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/%{name}/connection-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/%{name}/connection-driver/*.a # remove currently unsupported locale(s) for dir in $RPM_BUILD_ROOT/usr/share/locale/* do sdir=`echo $dir | sed "s|$RPM_BUILD_ROOT||"` if test -d $sdir ; then continue ; fi rm -rfv "$dir" done # temporarily remove polkit ACL policiy configuration - bnc#827644 rm -f $RPM_BUILD_ROOT/%{_datadir}/polkit-1/actions/org.libvirt.api.policy mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/lib/libvirt mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/libvirt/hooks %find_lang %{name} # Add a README to the libvirt package with a note about the empty # file list cat > $RPM_BUILD_ROOT%{_docdir}/libvirt/libvirt.README << 'EOF' The libvirt package no longer contains any files. It exists now only to fulfill its 'Provides' contract. EOF install -d -m 0755 $RPM_BUILD_ROOT%{_localstatedir}/lib/libvirt/dnsmasq/ install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # Strip auto-generated UUID - we need it generated per-install sed -i -e "//d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml %if %{with_lxc} cat > $RPM_BUILD_ROOT%{_docdir}/libvirt/libvirt-daemon-lxc.README << 'EOF' Any empty package encapsulating requirements for a libvirtd capable of managing LXC. EOF %else rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if %{with_qemu} cat > $RPM_BUILD_ROOT%{_docdir}/libvirt/libvirt-daemon-qemu.README << 'EOF' Any empty package encapsulating requirements for a libvirtd capable of managing QEMU/KVM. EOF %else rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if %{with_uml} cat > $RPM_BUILD_ROOT%{_docdir}/libvirt/libvirt-daemon-uml.README << 'EOF' Any empty package encapsulating requirements for a libvirtd capable of managing UML. EOF %else rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml %endif %if %{with_vbox} cat > $RPM_BUILD_ROOT%{_docdir}/libvirt/libvirt-daemon-vbox.README << 'EOF' Any empty package encapsulating requirements for a libvirtd capable of managing VirtualBox. EOF %endif %if %{with_xen} || %{with_libxl} cat > $RPM_BUILD_ROOT%{_docdir}/libvirt/libvirt-daemon-xen.README << 'EOF' Any empty package encapsulating requirements for a libvirtd capable of managing Xen. EOF %endif %if ! %{with_libxl} rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -f $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif # init scripts mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/init.d mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/adm/fillup-templates # Currently using our own libvirtd init script rm -f $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/libvirtd %if %{with_systemd} ln -s %{_sbindir}/service $RPM_BUILD_ROOT%{_sbindir}/rclibvirtd %else install %SOURCE3 $RPM_BUILD_ROOT%{_sysconfdir}/init.d/libvirtd ln -s /etc/init.d/libvirtd $RPM_BUILD_ROOT%{_sbindir}/rclibvirtd %endif mv $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/libvirtd $RPM_BUILD_ROOT%{_localstatedir}/adm/fillup-templates/sysconfig.libvirtd rm -f $RPM_BUILD_ROOT/usr/lib/sysctl.d/60-libvirtd.conf # For other services, use the in-tree scripts %if %{with_systemd} rm -f $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/virtlogd ln -s %{_sbindir}/service $RPM_BUILD_ROOT%{_sbindir}/rcvirtlogd rm -f $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/virtlockd ln -s %{_sbindir}/service $RPM_BUILD_ROOT%{_sbindir}/rcvirtlockd %else mv $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/virtlogd $RPM_BUILD_ROOT%{_sysconfdir}/init.d/virtlogd ln -s /etc/init.d/virtlogd $RPM_BUILD_ROOT%{_sbindir}/rcvirtlogd mv $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/virtlockd $RPM_BUILD_ROOT%{_sysconfdir}/init.d/virtlockd ln -s /etc/init.d/virtlockd $RPM_BUILD_ROOT%{_sbindir}/rcvirtlockd %endif mv $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/virtlogd $RPM_BUILD_ROOT%{_localstatedir}/adm/fillup-templates/sysconfig.virtlogd mv $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/virtlockd $RPM_BUILD_ROOT%{_localstatedir}/adm/fillup-templates/sysconfig.virtlockd #install firewall definitions format is described here: #/usr/share/SuSEfirewall2/services/TEMPLATE mkdir -p $RPM_BUILD_ROOT/%{_fwdefdir} install -m 644 %{S:4} $RPM_BUILD_ROOT/%{_fwdefdir}/libvirtd-relocation-server %if %{with_systemd} rm -f $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/libvirt-guests ln -s %{_sbindir}/service $RPM_BUILD_ROOT%{_sbindir}/rclibvirt-guests %else mv $RPM_BUILD_ROOT%{_sysconfdir}/rc.d/init.d/libvirt-guests $RPM_BUILD_ROOT%{_sysconfdir}/init.d/libvirt-guests mkdir -p $RPM_BUILD_ROOT%{_sbindir} ln -s %{_sysconfdir}/init.d/libvirt-guests $RPM_BUILD_ROOT%{_sbindir}/rclibvirt-guests %endif mv $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/libvirt-guests $RPM_BUILD_ROOT%{_localstatedir}/adm/fillup-templates/sysconfig.libvirt-guests %ifarch %{power64} s390x x86_64 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %fdupes -s $RPM_BUILD_ROOT %clean rm -rf $RPM_BUILD_ROOT %check cd tests SKIP_TESTS="" # These tests don't current work in a mock build root # virnetsockettest: needs unsupported linux-user syscalls SKIP_TESTS="$SKIP_TESTS virnetsockettest" # virportallocatortest fails on aarch64 due to unsupported IPV6_V6ONLY flag %ifarch aarch64 SKIP_TESTS="$SKIP_TESTS virportallocatortest" %endif for i in $SKIP_TESTS do rm -f $i printf 'int main(void) { return 0; }' > $i.c done make if ! make check VIR_TEST_DEBUG=1 then cat test-suite.log || true exit 1 fi %pre daemon %if %{with_systemd} %service_add_pre libvirtd.service %service_add_pre virtlockd.service virtlockd.socket %service_add_pre virtlogd.service virtlogd.socket %endif %{_bindir}/getent group libvirt >/dev/null || \ %{_sbindir}/groupadd -r libvirt || : %post daemon /sbin/ldconfig %if %{with_systemd} %service_add_post libvirtd.service %service_add_post virtlockd.service virtlockd.socket %service_add_post virtlogd.service virtlogd.socket %endif %{fillup_only -n libvirtd} %{fillup_only -n virtlockd} %{fillup_only -n virtlogd} %preun daemon %if %{with_systemd} %service_del_preun libvirtd.service %service_del_preun virtlockd.service virtlockd.socket %service_del_preun virtlogd.service virtlogd.socket %else %stop_on_removal libvirtd %stop_on_removal virtlockd %stop_on_removal virtlogd %endif %postun daemon /sbin/ldconfig %if %{with_systemd} # On upgrade, defer restarting daemons until %posttrans if test $1 -eq 0 ; then for service in libvirtd virtlockd virtlogd ; do rm -f "/var/lib/systemd/migrated/$service" 2> /dev/null || : done /usr/bin/systemctl daemon-reload >/dev/null 2>&1 || : fi %else %restart_on_update libvirtd %restart_on_update virtlockd %restart_on_update virtlogd %endif %insserv_cleanup %posttrans daemon # All connection drivers should be installed post transaction. # Time to restart daemons. %if %{with_systemd} if test "$YAST_IS_RUNNING" != "instsys" -a "$DISABLE_RESTART_ON_UPDATE" != yes ; then for service in libvirtd virtlockd virtlogd ; do /usr/bin/systemctl try-restart ${service}.service >/dev/null 2>&1 || : done fi %endif # In upgrade scenario we must explicitly enable virtlockd/virtlogd # sockets, if libvirtd is already enabled and start them if # libvirtd is running, otherwise you'll get failures to start # guests %triggerpostun daemon -- libvirt-daemon < 1.3.0 if [ $1 -ge 1 ] ; then %if %{with_systemd} /usr/bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && /usr/bin/systemctl enable virtlogd.socket || : /usr/bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && /usr/bin/systemctl start virtlogd.socket || : %else /sbin/chkconfig libvirtd 1>/dev/null 2>&1 && /sbin/chkconfig virtlogd on || : /sbin/service libvirtd status 1>/dev/null 2>&1 && /sbin/service virtlogd start || : %endif fi %post daemon-config-network # Install the default network if one doesn't exist if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then UUID=`/usr/bin/uuidgen` sed -e "s,,\n $UUID," \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml fi %pre client %if %{with_systemd} %service_add_pre libvirt-guests.service %endif %post client /sbin/ldconfig %if %{with_systemd} %service_add_post libvirt-guests.service %endif %{fillup_only -n libvirt-guests} %preun client %if %{with_systemd} %service_del_preun libvirt-guests.service %else %stop_on_removal libvirt-guests %endif if [ $1 = 0 ]; then rm -f /var/lib/libvirt/libvirt-guests fi %postun client /sbin/ldconfig %if %{with_systemd} %service_del_postun libvirt-guests.service %endif %insserv_cleanup %post nss /sbin/ldconfig %postun nss /sbin/ldconfig %files %doc %{_docdir}/%{name}/libvirt.README %files daemon %{_sbindir}/libvirtd %{_sbindir}/virtlogd %{_sbindir}/virtlockd %dir %{_libdir}/%{name} %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/hooks %{_localstatedir}/adm/fillup-templates/sysconfig.libvirtd %{_localstatedir}/adm/fillup-templates/sysconfig.virtlogd %{_localstatedir}/adm/fillup-templates/sysconfig.virtlockd %if %{with_systemd} %{_unitdir}/libvirtd.service %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %else %config /etc/init.d/libvirtd %config /etc/init.d/virtlogd %config /etc/init.d/virtlockd %endif %{_sbindir}/rclibvirtd %{_sbindir}/rcvirtlogd %{_sbindir}/rcvirtlockd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %dir %{_datadir}/augeas/ %dir %{_datadir}/augeas/lenses %dir %{_datadir}/augeas/lenses/tests %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %dir %{_localstatedir}/lib/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %dir %attr(0755, root, root) %{_libdir}/%{name}/lock-driver %attr(0755, root, root) %{_libdir}/%{name}/lock-driver/lockd.so %if %{with_polkit_rules} %{_datadir}/polkit-1/rules.d/50-libvirt.rules %endif %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %attr(0755, root, root) %{_libdir}/%{name}/libvirt_iohelper %doc %{_mandir}/man8/libvirtd.8* %doc %{_mandir}/man8/virtlogd.8* %doc %{_mandir}/man8/virtlockd.8* %if %{with_apparmor} %dir %{_sysconfdir}/apparmor.d %dir %{_sysconfdir}/apparmor.d/abstractions %dir %{_sysconfdir}/apparmor.d/libvirt %config(noreplace) %{_sysconfdir}/apparmor.d/usr.sbin.libvirtd %config(noreplace) %{_sysconfdir}/apparmor.d/usr.lib.libvirt.virt-aa-helper %config(noreplace) %{_sysconfdir}/apparmor.d/abstractions/libvirt-qemu %config(noreplace) %{_sysconfdir}/apparmor.d/abstractions/libvirt-lxc %config(noreplace) %{_sysconfdir}/apparmor.d/libvirt/TEMPLATE.lxc %config(noreplace) %{_sysconfdir}/apparmor.d/libvirt/TEMPLATE.qemu %{_libdir}/%{name}/virt-aa-helper %endif %config %{_fwdefdir}/libvirtd-relocation-server %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %files daemon-config-nwfilter %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so %files daemon-driver-network %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libdir}/%{name}/libvirt_leaseshelper %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so %files daemon-driver-nodedev %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so %files daemon-driver-nwfilter %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so %files daemon-driver-secret %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so %files daemon-driver-storage %attr(0755, root, root) %{_libdir}/%{name}/libvirt_parthelper %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so %if %{with_qemu} %files daemon-driver-qemu %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so %endif %if %{with_lxc} %files daemon-driver-lxc %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %attr(0755, root, root) %{_libdir}/%{name}/libvirt_lxc %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so %attr(0755, root, root) %{_bindir}/virt-lxc-convert %endif %if %{with_uml} %files daemon-driver-uml %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/ %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so %endif %if %{with_xen} %files daemon-driver-xen %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_xen.so %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %dir %{_libdir}/%{name}/connection-driver %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so %endif %if %{with_vbox} %files daemon-driver-vbox %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so %endif %if %{with_qemu} %files daemon-qemu %doc %{_docdir}/%{name}/libvirt-daemon-qemu.README %endif %if %{with_lxc} %files daemon-lxc %doc %{_docdir}/%{name}/libvirt-daemon-lxc.README %endif %if %{with_uml} %files daemon-uml %doc %{_docdir}/%{name}/libvirt-daemon-uml.README %endif %if %{with_xen} || %{with_libxl} %files daemon-xen %doc %{_docdir}/%{name}/libvirt-daemon-xen.README %endif %if %{with_vbox} %files daemon-vbox %doc %{_docdir}/%{name}/libvirt-daemon-vbox.README %endif %files client -f %{name}.lang %doc AUTHORS ChangeLog.gz NEWS README COPYING COPYING.LESSER TODO %doc %{_mandir}/man1/virsh.1* %doc %{_mandir}/man1/virt-admin.1* %doc %{_mandir}/man1/virt-xml-validate.1* %doc %{_mandir}/man1/virt-pki-validate.1* %doc %{_mandir}/man1/virt-host-validate.1* %config(noreplace) %{_sysconfdir}/%{name}/libvirt.conf %config(noreplace) %{_sysconfdir}/%{name}/libvirt-admin.conf %{_bindir}/virsh %{_bindir}/virt-admin %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-validate %{_bindir}/virt-host-validate %dir %{_libdir}/%{name} %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %attr(0755, root, root) %{_libdir}/%{name}/libvirt-guests.sh %{_localstatedir}/adm/fillup-templates/sysconfig.libvirt-guests %if %{with_systemd} %{_unitdir}/libvirt-guests.service %else %config /etc/init.d/libvirt-guests %endif %{_sbindir}/rclibvirt-guests %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %{_datadir}/libvirt/schemas/basictypes.rng %{_datadir}/libvirt/schemas/capability.rng %{_datadir}/libvirt/schemas/domain.rng %{_datadir}/libvirt/schemas/domaincaps.rng %{_datadir}/libvirt/schemas/domaincommon.rng %{_datadir}/libvirt/schemas/domainsnapshot.rng %{_datadir}/libvirt/schemas/interface.rng %{_datadir}/libvirt/schemas/network.rng %{_datadir}/libvirt/schemas/networkcommon.rng %{_datadir}/libvirt/schemas/nodedev.rng %{_datadir}/libvirt/schemas/nwfilter.rng %{_datadir}/libvirt/schemas/secret.rng %{_datadir}/libvirt/schemas/storagecommon.rng %{_datadir}/libvirt/schemas/storagepool.rng %{_datadir}/libvirt/schemas/storagevol.rng %{_datadir}/libvirt/cpu_map.xml %{_datadir}/libvirt/libvirtLogo.png %dir %{_sysconfdir}/sasl2/ %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %{_includedir}/libvirt %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml %files doc # Website %dir %{_docdir}/libvirt %doc %{_docdir}/%{name}/*.png %doc %{_docdir}/%{name}/*.html %doc %{_docdir}/%{name}/*.gif %doc %{_docdir}/%{name}/*.css %doc %{_docdir}/%{name}/html %doc %{_docdir}/%{name}/internals # API docs %dir %{_datadir}/gtk-doc/html/libvirt/ %doc %{_datadir}/gtk-doc/html/libvirt/* %if %{with_sanlock} %files lock-sanlock %doc %{_mandir}/man8/virt-sanlock-cleanup.8* %if %{with_qemu} %config(noreplace) %{_sysconfdir}/%{name}/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/%{name}/libxl-sanlock.conf %endif %dir %{_libdir}/%{name}/lock-driver/ %attr(0755, root, root) %{_libdir}/%{name}/lock-driver/sanlock.so %dir %{_datadir}/augeas/ %dir %{_datadir}/augeas/lenses %dir %{_datadir}/augeas/lenses/tests %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0700, root, root) %{_localstatedir}/lib/%{name}/sanlock %{_sbindir}/virt-sanlock-cleanup %attr(0755, root, root) %{_libdir}/%{name}/libvirt_sanlock_helper %endif %if %{with_wireshark} %files -n wireshark-plugin-libvirt %{_libdir}/wireshark/plugins/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %changelog