linuxptp/linuxptp.spec

110 lines
3.2 KiB
RPMSpec
Raw Normal View History

#
# spec file for package linuxptp
#
# Copyright (c) 2021 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
Accepting request 847615 from home:jbohac:branches:network:time - Update to version 3.1: * ts2phc: nmea: Drop time of day readings older than five seconds. * ts2phc: nmea: Update the leap seconds table on demand. * ts2phc: nmea: Add a configuration option for the current leap seconds file. * ts2phc: nmea: Add error messages for leap second lookup failures. * ts2phc: nmea: Correct UTC to TAI conversion. * posix_clock_open: derive PHC index from device name if possible * phc_ctl: display all capability information * ts2phc: Ignore pulses with invalid time stamps. * ts2phc: Fix memory leak. * ts2phc: Use proper close method on the error path. * port: Support slave event monitoring of delay timing data. * monitor: Add support for slave delay timing data TLV. * pmc: Show slave receive timing data TLVs attached to signaling messages. * port: Support slave event monitoring of Sync timing data. * clock: Create a slave event monitor. * Introduce a module for slave event monitoring. * Reject path trace TLVs with excessive elements. * Let the free running port state reflect the synchronization uncertain flag. * pmc: Support getting and setting the local synchronization uncertain flag. * Implement the synchronization uncertain flag. * Add support for write phase mode. * Decouple servo state from automotive profile. * ts2phc: Support using a GPS radio as the master clock. * Introduce a leap second table. * ts2phc: Support using a PHC as the master clock. * Introduce the ts2phc program. * pmc: Allow multiple local subscribers. * pmc: Subscribe to port state push notification events when requested. * clock: reset master/local rr when best clock id changes * unicast: Enable sharing master tables between ports. * Accept external PHC devices from the command line. * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock. * Correct the signature of the legacy system offset measurement method. * ptp4l: Add configuration option for socket priority * sk: Recognize HWTSTAMP_FILTER_SOME * Improve G.8275.[12] example configs. * rtnl: add team activebackup support * Ignore signaling messages on target port mismatch. * Avoid fault when receiving zero length packets * phc2sys: Fix crash when trying to synchronize unadjustable clock. * Added support for opening POSIX clock devices * Allow ignoring source port identity in end to end mode. * port: correction of port name used port_open * Add example configuration for Automotive Profile. * Add ignore_source_id config option. * Add inhibit_announce config option. * Add BMCA config option. * port: Add configurable option to set asCapable. * timemaster: Allow ptp4l-specific sections in [ptp4l.conf]. * unicast: Process timeouts equal to current time. * snmp4lptp: added snmp4lptp.8 * Add possibility to set clockIdentity * Introduce the maxStepsRemoved attribute * config: Add hardware time stamp filter setting mode * snmp4lptp: Added function for data collection from ptp4l program. * snmp4lptp: Added communication to ptp4l via the UDS port. * snmp4lptp: Add snmp sub agent for linuxptp - re-introduce the _service file - removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html - Update to stable release 2.0: * Peer-to-Peer Transparent Clock support * End-to-End Transparent Clock support * Unicast support * Support for all three Telecom Profiles + T-REC-G.8265.1-201407 + T-REC-G.8275.1-201606 + T-REC-G.8275.2-201708 - Changes for version 1.9.2: * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9) * Command line support for every configuration variable via long options * IPoIB interface support * Improved Delay Request performance at high message rates * Improved UTC offset tracking * Multiple TLV support * NetSync Monitor protocol support * Peer to peer one-step * Support for bonded interfaces - No longer use _service Update to version 1.9+git1.gd14f11f: * Expand and rationalize time stamping options. * Introduce peer to peer one step. * pmc: add long options and configuration file * port: Implement the NetSync Monitor protocol. * Introduce an option to ignore the transport specific field. * clock: add option to specify initial path delay. * sk: turn warnings about unexpected RX filter into debug messages. - change the versioning scheme, resulting in version 1.8+git65.g303b08c - Update to version v1.8+git.20180101 (bsc#1050682): * clock: Don't forward management requests to UDS port. * Add an acknowledgment in the readme for Meinberg. * phc2sys: update '-s' option * sk: don't leak socket when reading of IB GUID fails. * Add compile time sanity check for interface name lengths. * phc_ctl: fix adj command to accept negative offset. * port: return timestamping iface in port properties * phc2sys: re-create clock clkid and servo when phc index changed * phc2sys: split servo_add from function clock_add * transport: pass struct interface to transport_open - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Remove future goals from description. - Cleanup spec file with spec-cleaner - Use url for source - Use kernel-devel instead full source - upgraded to 1.8 - new tools: timemaster, phc_ctl - sanitize release line in specfile - updated How To to mention ethtool (bnc#865358) - convert to systemd (bnc#865355) - two separate services (ptp4l and phc2sys) instead of linuxptp - two separate config files: /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of /etc/sysconfig/linuxptp - upgraded to 1.4 - fixed FSF address in init file - added Linux PTP Howto - adjusted sysconfig defaults to match changes made to phc2sys behavior - upgraded to 1.2.git74e70372 - upgraded to 1.2 - reviewed by Security (bnc#809336) - license update: GPL-2.0+ No indication of a GPL version 2 only license. Also, use SPDX format where possible - upgraded to 1.1 - initial packaging OBS-URL: https://build.opensuse.org/request/show/847615 OBS-URL: https://build.opensuse.org/package/show/network:time/linuxptp?expand=0&rev=18
2020-11-11 08:51:58 +01:00
# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
#Compat macro for new _fillupdir macro introduced in Nov 2017
%if ! %{defined _fillupdir}
%define _fillupdir %{_localstatedir}/adm/fillup-templates
%endif
Name: linuxptp
Version: 3.1.1
Release: 0
Summary: Precision Time Protocol v2 daemon
License: GPL-2.0-or-later
Group: Productivity/Networking/Other
URL: http://linuxptp.sourceforge.net/
Accepting request 847615 from home:jbohac:branches:network:time - Update to version 3.1: * ts2phc: nmea: Drop time of day readings older than five seconds. * ts2phc: nmea: Update the leap seconds table on demand. * ts2phc: nmea: Add a configuration option for the current leap seconds file. * ts2phc: nmea: Add error messages for leap second lookup failures. * ts2phc: nmea: Correct UTC to TAI conversion. * posix_clock_open: derive PHC index from device name if possible * phc_ctl: display all capability information * ts2phc: Ignore pulses with invalid time stamps. * ts2phc: Fix memory leak. * ts2phc: Use proper close method on the error path. * port: Support slave event monitoring of delay timing data. * monitor: Add support for slave delay timing data TLV. * pmc: Show slave receive timing data TLVs attached to signaling messages. * port: Support slave event monitoring of Sync timing data. * clock: Create a slave event monitor. * Introduce a module for slave event monitoring. * Reject path trace TLVs with excessive elements. * Let the free running port state reflect the synchronization uncertain flag. * pmc: Support getting and setting the local synchronization uncertain flag. * Implement the synchronization uncertain flag. * Add support for write phase mode. * Decouple servo state from automotive profile. * ts2phc: Support using a GPS radio as the master clock. * Introduce a leap second table. * ts2phc: Support using a PHC as the master clock. * Introduce the ts2phc program. * pmc: Allow multiple local subscribers. * pmc: Subscribe to port state push notification events when requested. * clock: reset master/local rr when best clock id changes * unicast: Enable sharing master tables between ports. * Accept external PHC devices from the command line. * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock. * Correct the signature of the legacy system offset measurement method. * ptp4l: Add configuration option for socket priority * sk: Recognize HWTSTAMP_FILTER_SOME * Improve G.8275.[12] example configs. * rtnl: add team activebackup support * Ignore signaling messages on target port mismatch. * Avoid fault when receiving zero length packets * phc2sys: Fix crash when trying to synchronize unadjustable clock. * Added support for opening POSIX clock devices * Allow ignoring source port identity in end to end mode. * port: correction of port name used port_open * Add example configuration for Automotive Profile. * Add ignore_source_id config option. * Add inhibit_announce config option. * Add BMCA config option. * port: Add configurable option to set asCapable. * timemaster: Allow ptp4l-specific sections in [ptp4l.conf]. * unicast: Process timeouts equal to current time. * snmp4lptp: added snmp4lptp.8 * Add possibility to set clockIdentity * Introduce the maxStepsRemoved attribute * config: Add hardware time stamp filter setting mode * snmp4lptp: Added function for data collection from ptp4l program. * snmp4lptp: Added communication to ptp4l via the UDS port. * snmp4lptp: Add snmp sub agent for linuxptp - re-introduce the _service file - removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html - Update to stable release 2.0: * Peer-to-Peer Transparent Clock support * End-to-End Transparent Clock support * Unicast support * Support for all three Telecom Profiles + T-REC-G.8265.1-201407 + T-REC-G.8275.1-201606 + T-REC-G.8275.2-201708 - Changes for version 1.9.2: * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9) * Command line support for every configuration variable via long options * IPoIB interface support * Improved Delay Request performance at high message rates * Improved UTC offset tracking * Multiple TLV support * NetSync Monitor protocol support * Peer to peer one-step * Support for bonded interfaces - No longer use _service Update to version 1.9+git1.gd14f11f: * Expand and rationalize time stamping options. * Introduce peer to peer one step. * pmc: add long options and configuration file * port: Implement the NetSync Monitor protocol. * Introduce an option to ignore the transport specific field. * clock: add option to specify initial path delay. * sk: turn warnings about unexpected RX filter into debug messages. - change the versioning scheme, resulting in version 1.8+git65.g303b08c - Update to version v1.8+git.20180101 (bsc#1050682): * clock: Don't forward management requests to UDS port. * Add an acknowledgment in the readme for Meinberg. * phc2sys: update '-s' option * sk: don't leak socket when reading of IB GUID fails. * Add compile time sanity check for interface name lengths. * phc_ctl: fix adj command to accept negative offset. * port: return timestamping iface in port properties * phc2sys: re-create clock clkid and servo when phc index changed * phc2sys: split servo_add from function clock_add * transport: pass struct interface to transport_open - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Remove future goals from description. - Cleanup spec file with spec-cleaner - Use url for source - Use kernel-devel instead full source - upgraded to 1.8 - new tools: timemaster, phc_ctl - sanitize release line in specfile - updated How To to mention ethtool (bnc#865358) - convert to systemd (bnc#865355) - two separate services (ptp4l and phc2sys) instead of linuxptp - two separate config files: /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of /etc/sysconfig/linuxptp - upgraded to 1.4 - fixed FSF address in init file - added Linux PTP Howto - adjusted sysconfig defaults to match changes made to phc2sys behavior - upgraded to 1.2.git74e70372 - upgraded to 1.2 - reviewed by Security (bnc#809336) - license update: GPL-2.0+ No indication of a GPL version 2 only license. Also, use SPDX format where possible - upgraded to 1.1 - initial packaging OBS-URL: https://build.opensuse.org/request/show/847615 OBS-URL: https://build.opensuse.org/package/show/network:time/linuxptp?expand=0&rev=18
2020-11-11 08:51:58 +01:00
Source0: %{name}-%{version}.tar.xz
Source1: ptp4l.service
Source2: sysconfig.ptp4l
Source4: linuxptp-howto.txt
Source5: phc2sys.service
Source6: sysconfig.phc2sys
BuildRequires: kernel-devel
BuildRequires: systemd-rpm-macros
Requires(pre): %fillup_prereq
Provides: ptp-timekeeping
%{?systemd_requires}
%description
This software is an implementation of the Precision Time Protocol (PTP)
according to the IEEE1588 standard for Linux.
%prep
%setup -q
%build
export EXTRA_CFLAGS="%{optflags} -Iusr/include"
make %{?_smp_mflags}
cp %{SOURCE4} .
%install
make prefix=%{buildroot}%{_prefix} mandir=%{buildroot}/%{_mandir} install
install -Dpm 644 %{SOURCE1} %{buildroot}/%{_unitdir}/ptp4l.service
install -Dpm 644 %{SOURCE5} %{buildroot}/%{_unitdir}/phc2sys.service
ln -s %{_sbindir}/service %{buildroot}%{_sbindir}/rcptp4l
ln -s %{_sbindir}/service %{buildroot}%{_sbindir}/rcphc2sys
install -Dpm 644 configs/default.cfg %{buildroot}/%{_sysconfdir}/ptp4l.conf
install -Dpm 644 %{SOURCE2} %{buildroot}%{_fillupdir}/sysconfig.ptp4l
install -Dpm 644 %{SOURCE6} %{buildroot}%{_fillupdir}/sysconfig.phc2sys
%pre
%service_add_pre ptp4l.service phc2sys.service
%post
%{fillup_only -n ptp4l}
%{fillup_only -n phc2sys}
%service_add_post ptp4l.service phc2sys.service
%preun
%service_del_preun ptp4l.service phc2sys.service
%postun
%service_del_postun ptp4l.service phc2sys.service
%files
%license COPYING
%doc README.org linuxptp-howto.txt configs
%{_unitdir}/ptp4l.service
%{_unitdir}/phc2sys.service
%{_sbindir}/rcptp4l
%{_sbindir}/rcphc2sys
%config %{_sysconfdir}/ptp4l.conf
%{_sbindir}/hwstamp_ctl
%{_sbindir}/phc2sys
%{_sbindir}/phc_ctl
%{_sbindir}/pmc
%{_sbindir}/ptp4l
%{_sbindir}/nsm
%{_sbindir}/timemaster
Accepting request 847615 from home:jbohac:branches:network:time - Update to version 3.1: * ts2phc: nmea: Drop time of day readings older than five seconds. * ts2phc: nmea: Update the leap seconds table on demand. * ts2phc: nmea: Add a configuration option for the current leap seconds file. * ts2phc: nmea: Add error messages for leap second lookup failures. * ts2phc: nmea: Correct UTC to TAI conversion. * posix_clock_open: derive PHC index from device name if possible * phc_ctl: display all capability information * ts2phc: Ignore pulses with invalid time stamps. * ts2phc: Fix memory leak. * ts2phc: Use proper close method on the error path. * port: Support slave event monitoring of delay timing data. * monitor: Add support for slave delay timing data TLV. * pmc: Show slave receive timing data TLVs attached to signaling messages. * port: Support slave event monitoring of Sync timing data. * clock: Create a slave event monitor. * Introduce a module for slave event monitoring. * Reject path trace TLVs with excessive elements. * Let the free running port state reflect the synchronization uncertain flag. * pmc: Support getting and setting the local synchronization uncertain flag. * Implement the synchronization uncertain flag. * Add support for write phase mode. * Decouple servo state from automotive profile. * ts2phc: Support using a GPS radio as the master clock. * Introduce a leap second table. * ts2phc: Support using a PHC as the master clock. * Introduce the ts2phc program. * pmc: Allow multiple local subscribers. * pmc: Subscribe to port state push notification events when requested. * clock: reset master/local rr when best clock id changes * unicast: Enable sharing master tables between ports. * Accept external PHC devices from the command line. * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock. * Correct the signature of the legacy system offset measurement method. * ptp4l: Add configuration option for socket priority * sk: Recognize HWTSTAMP_FILTER_SOME * Improve G.8275.[12] example configs. * rtnl: add team activebackup support * Ignore signaling messages on target port mismatch. * Avoid fault when receiving zero length packets * phc2sys: Fix crash when trying to synchronize unadjustable clock. * Added support for opening POSIX clock devices * Allow ignoring source port identity in end to end mode. * port: correction of port name used port_open * Add example configuration for Automotive Profile. * Add ignore_source_id config option. * Add inhibit_announce config option. * Add BMCA config option. * port: Add configurable option to set asCapable. * timemaster: Allow ptp4l-specific sections in [ptp4l.conf]. * unicast: Process timeouts equal to current time. * snmp4lptp: added snmp4lptp.8 * Add possibility to set clockIdentity * Introduce the maxStepsRemoved attribute * config: Add hardware time stamp filter setting mode * snmp4lptp: Added function for data collection from ptp4l program. * snmp4lptp: Added communication to ptp4l via the UDS port. * snmp4lptp: Add snmp sub agent for linuxptp - re-introduce the _service file - removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html - Update to stable release 2.0: * Peer-to-Peer Transparent Clock support * End-to-End Transparent Clock support * Unicast support * Support for all three Telecom Profiles + T-REC-G.8265.1-201407 + T-REC-G.8275.1-201606 + T-REC-G.8275.2-201708 - Changes for version 1.9.2: * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9) * Command line support for every configuration variable via long options * IPoIB interface support * Improved Delay Request performance at high message rates * Improved UTC offset tracking * Multiple TLV support * NetSync Monitor protocol support * Peer to peer one-step * Support for bonded interfaces - No longer use _service Update to version 1.9+git1.gd14f11f: * Expand and rationalize time stamping options. * Introduce peer to peer one step. * pmc: add long options and configuration file * port: Implement the NetSync Monitor protocol. * Introduce an option to ignore the transport specific field. * clock: add option to specify initial path delay. * sk: turn warnings about unexpected RX filter into debug messages. - change the versioning scheme, resulting in version 1.8+git65.g303b08c - Update to version v1.8+git.20180101 (bsc#1050682): * clock: Don't forward management requests to UDS port. * Add an acknowledgment in the readme for Meinberg. * phc2sys: update '-s' option * sk: don't leak socket when reading of IB GUID fails. * Add compile time sanity check for interface name lengths. * phc_ctl: fix adj command to accept negative offset. * port: return timestamping iface in port properties * phc2sys: re-create clock clkid and servo when phc index changed * phc2sys: split servo_add from function clock_add * transport: pass struct interface to transport_open - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Remove future goals from description. - Cleanup spec file with spec-cleaner - Use url for source - Use kernel-devel instead full source - upgraded to 1.8 - new tools: timemaster, phc_ctl - sanitize release line in specfile - updated How To to mention ethtool (bnc#865358) - convert to systemd (bnc#865355) - two separate services (ptp4l and phc2sys) instead of linuxptp - two separate config files: /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of /etc/sysconfig/linuxptp - upgraded to 1.4 - fixed FSF address in init file - added Linux PTP Howto - adjusted sysconfig defaults to match changes made to phc2sys behavior - upgraded to 1.2.git74e70372 - upgraded to 1.2 - reviewed by Security (bnc#809336) - license update: GPL-2.0+ No indication of a GPL version 2 only license. Also, use SPDX format where possible - upgraded to 1.1 - initial packaging OBS-URL: https://build.opensuse.org/request/show/847615 OBS-URL: https://build.opensuse.org/package/show/network:time/linuxptp?expand=0&rev=18
2020-11-11 08:51:58 +01:00
%{_sbindir}/ts2phc
%{_mandir}/man8/hwstamp_ctl.8%{?ext_man}
Accepting request 847615 from home:jbohac:branches:network:time - Update to version 3.1: * ts2phc: nmea: Drop time of day readings older than five seconds. * ts2phc: nmea: Update the leap seconds table on demand. * ts2phc: nmea: Add a configuration option for the current leap seconds file. * ts2phc: nmea: Add error messages for leap second lookup failures. * ts2phc: nmea: Correct UTC to TAI conversion. * posix_clock_open: derive PHC index from device name if possible * phc_ctl: display all capability information * ts2phc: Ignore pulses with invalid time stamps. * ts2phc: Fix memory leak. * ts2phc: Use proper close method on the error path. * port: Support slave event monitoring of delay timing data. * monitor: Add support for slave delay timing data TLV. * pmc: Show slave receive timing data TLVs attached to signaling messages. * port: Support slave event monitoring of Sync timing data. * clock: Create a slave event monitor. * Introduce a module for slave event monitoring. * Reject path trace TLVs with excessive elements. * Let the free running port state reflect the synchronization uncertain flag. * pmc: Support getting and setting the local synchronization uncertain flag. * Implement the synchronization uncertain flag. * Add support for write phase mode. * Decouple servo state from automotive profile. * ts2phc: Support using a GPS radio as the master clock. * Introduce a leap second table. * ts2phc: Support using a PHC as the master clock. * Introduce the ts2phc program. * pmc: Allow multiple local subscribers. * pmc: Subscribe to port state push notification events when requested. * clock: reset master/local rr when best clock id changes * unicast: Enable sharing master tables between ports. * Accept external PHC devices from the command line. * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock. * Correct the signature of the legacy system offset measurement method. * ptp4l: Add configuration option for socket priority * sk: Recognize HWTSTAMP_FILTER_SOME * Improve G.8275.[12] example configs. * rtnl: add team activebackup support * Ignore signaling messages on target port mismatch. * Avoid fault when receiving zero length packets * phc2sys: Fix crash when trying to synchronize unadjustable clock. * Added support for opening POSIX clock devices * Allow ignoring source port identity in end to end mode. * port: correction of port name used port_open * Add example configuration for Automotive Profile. * Add ignore_source_id config option. * Add inhibit_announce config option. * Add BMCA config option. * port: Add configurable option to set asCapable. * timemaster: Allow ptp4l-specific sections in [ptp4l.conf]. * unicast: Process timeouts equal to current time. * snmp4lptp: added snmp4lptp.8 * Add possibility to set clockIdentity * Introduce the maxStepsRemoved attribute * config: Add hardware time stamp filter setting mode * snmp4lptp: Added function for data collection from ptp4l program. * snmp4lptp: Added communication to ptp4l via the UDS port. * snmp4lptp: Add snmp sub agent for linuxptp - re-introduce the _service file - removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html - Update to stable release 2.0: * Peer-to-Peer Transparent Clock support * End-to-End Transparent Clock support * Unicast support * Support for all three Telecom Profiles + T-REC-G.8265.1-201407 + T-REC-G.8275.1-201606 + T-REC-G.8275.2-201708 - Changes for version 1.9.2: * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9) * Command line support for every configuration variable via long options * IPoIB interface support * Improved Delay Request performance at high message rates * Improved UTC offset tracking * Multiple TLV support * NetSync Monitor protocol support * Peer to peer one-step * Support for bonded interfaces - No longer use _service Update to version 1.9+git1.gd14f11f: * Expand and rationalize time stamping options. * Introduce peer to peer one step. * pmc: add long options and configuration file * port: Implement the NetSync Monitor protocol. * Introduce an option to ignore the transport specific field. * clock: add option to specify initial path delay. * sk: turn warnings about unexpected RX filter into debug messages. - change the versioning scheme, resulting in version 1.8+git65.g303b08c - Update to version v1.8+git.20180101 (bsc#1050682): * clock: Don't forward management requests to UDS port. * Add an acknowledgment in the readme for Meinberg. * phc2sys: update '-s' option * sk: don't leak socket when reading of IB GUID fails. * Add compile time sanity check for interface name lengths. * phc_ctl: fix adj command to accept negative offset. * port: return timestamping iface in port properties * phc2sys: re-create clock clkid and servo when phc index changed * phc2sys: split servo_add from function clock_add * transport: pass struct interface to transport_open - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Remove future goals from description. - Cleanup spec file with spec-cleaner - Use url for source - Use kernel-devel instead full source - upgraded to 1.8 - new tools: timemaster, phc_ctl - sanitize release line in specfile - updated How To to mention ethtool (bnc#865358) - convert to systemd (bnc#865355) - two separate services (ptp4l and phc2sys) instead of linuxptp - two separate config files: /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of /etc/sysconfig/linuxptp - upgraded to 1.4 - fixed FSF address in init file - added Linux PTP Howto - adjusted sysconfig defaults to match changes made to phc2sys behavior - upgraded to 1.2.git74e70372 - upgraded to 1.2 - reviewed by Security (bnc#809336) - license update: GPL-2.0+ No indication of a GPL version 2 only license. Also, use SPDX format where possible - upgraded to 1.1 - initial packaging OBS-URL: https://build.opensuse.org/request/show/847615 OBS-URL: https://build.opensuse.org/package/show/network:time/linuxptp?expand=0&rev=18
2020-11-11 08:51:58 +01:00
%{_mandir}/man8/nsm.8%{?ext_man}
%{_mandir}/man8/phc2sys.8%{?ext_man}
%{_mandir}/man8/phc_ctl.8%{?ext_man}
%{_mandir}/man8/pmc.8%{?ext_man}
%{_mandir}/man8/ptp4l.8%{?ext_man}
%{_mandir}/man8/timemaster.8%{?ext_man}
Accepting request 847615 from home:jbohac:branches:network:time - Update to version 3.1: * ts2phc: nmea: Drop time of day readings older than five seconds. * ts2phc: nmea: Update the leap seconds table on demand. * ts2phc: nmea: Add a configuration option for the current leap seconds file. * ts2phc: nmea: Add error messages for leap second lookup failures. * ts2phc: nmea: Correct UTC to TAI conversion. * posix_clock_open: derive PHC index from device name if possible * phc_ctl: display all capability information * ts2phc: Ignore pulses with invalid time stamps. * ts2phc: Fix memory leak. * ts2phc: Use proper close method on the error path. * port: Support slave event monitoring of delay timing data. * monitor: Add support for slave delay timing data TLV. * pmc: Show slave receive timing data TLVs attached to signaling messages. * port: Support slave event monitoring of Sync timing data. * clock: Create a slave event monitor. * Introduce a module for slave event monitoring. * Reject path trace TLVs with excessive elements. * Let the free running port state reflect the synchronization uncertain flag. * pmc: Support getting and setting the local synchronization uncertain flag. * Implement the synchronization uncertain flag. * Add support for write phase mode. * Decouple servo state from automotive profile. * ts2phc: Support using a GPS radio as the master clock. * Introduce a leap second table. * ts2phc: Support using a PHC as the master clock. * Introduce the ts2phc program. * pmc: Allow multiple local subscribers. * pmc: Subscribe to port state push notification events when requested. * clock: reset master/local rr when best clock id changes * unicast: Enable sharing master tables between ports. * Accept external PHC devices from the command line. * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock. * Correct the signature of the legacy system offset measurement method. * ptp4l: Add configuration option for socket priority * sk: Recognize HWTSTAMP_FILTER_SOME * Improve G.8275.[12] example configs. * rtnl: add team activebackup support * Ignore signaling messages on target port mismatch. * Avoid fault when receiving zero length packets * phc2sys: Fix crash when trying to synchronize unadjustable clock. * Added support for opening POSIX clock devices * Allow ignoring source port identity in end to end mode. * port: correction of port name used port_open * Add example configuration for Automotive Profile. * Add ignore_source_id config option. * Add inhibit_announce config option. * Add BMCA config option. * port: Add configurable option to set asCapable. * timemaster: Allow ptp4l-specific sections in [ptp4l.conf]. * unicast: Process timeouts equal to current time. * snmp4lptp: added snmp4lptp.8 * Add possibility to set clockIdentity * Introduce the maxStepsRemoved attribute * config: Add hardware time stamp filter setting mode * snmp4lptp: Added function for data collection from ptp4l program. * snmp4lptp: Added communication to ptp4l via the UDS port. * snmp4lptp: Add snmp sub agent for linuxptp - re-introduce the _service file - removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html - Update to stable release 2.0: * Peer-to-Peer Transparent Clock support * End-to-End Transparent Clock support * Unicast support * Support for all three Telecom Profiles + T-REC-G.8265.1-201407 + T-REC-G.8275.1-201606 + T-REC-G.8275.2-201708 - Changes for version 1.9.2: * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9) * Command line support for every configuration variable via long options * IPoIB interface support * Improved Delay Request performance at high message rates * Improved UTC offset tracking * Multiple TLV support * NetSync Monitor protocol support * Peer to peer one-step * Support for bonded interfaces - No longer use _service Update to version 1.9+git1.gd14f11f: * Expand and rationalize time stamping options. * Introduce peer to peer one step. * pmc: add long options and configuration file * port: Implement the NetSync Monitor protocol. * Introduce an option to ignore the transport specific field. * clock: add option to specify initial path delay. * sk: turn warnings about unexpected RX filter into debug messages. - change the versioning scheme, resulting in version 1.8+git65.g303b08c - Update to version v1.8+git.20180101 (bsc#1050682): * clock: Don't forward management requests to UDS port. * Add an acknowledgment in the readme for Meinberg. * phc2sys: update '-s' option * sk: don't leak socket when reading of IB GUID fails. * Add compile time sanity check for interface name lengths. * phc_ctl: fix adj command to accept negative offset. * port: return timestamping iface in port properties * phc2sys: re-create clock clkid and servo when phc index changed * phc2sys: split servo_add from function clock_add * transport: pass struct interface to transport_open - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) - Remove future goals from description. - Cleanup spec file with spec-cleaner - Use url for source - Use kernel-devel instead full source - upgraded to 1.8 - new tools: timemaster, phc_ctl - sanitize release line in specfile - updated How To to mention ethtool (bnc#865358) - convert to systemd (bnc#865355) - two separate services (ptp4l and phc2sys) instead of linuxptp - two separate config files: /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of /etc/sysconfig/linuxptp - upgraded to 1.4 - fixed FSF address in init file - added Linux PTP Howto - adjusted sysconfig defaults to match changes made to phc2sys behavior - upgraded to 1.2.git74e70372 - upgraded to 1.2 - reviewed by Security (bnc#809336) - license update: GPL-2.0+ No indication of a GPL version 2 only license. Also, use SPDX format where possible - upgraded to 1.1 - initial packaging OBS-URL: https://build.opensuse.org/request/show/847615 OBS-URL: https://build.opensuse.org/package/show/network:time/linuxptp?expand=0&rev=18
2020-11-11 08:51:58 +01:00
%{_mandir}/man8/ts2phc.8%{?ext_man}
%{_fillupdir}/sysconfig.ptp4l
%{_fillupdir}/sysconfig.phc2sys
%changelog