------------------------------------------------------------------- Tue Jul 06 08:06:16 UTC 2021 - jbohac@suse.com - Update to version 3.1.1: * Version 3.1.1 * tc: Fix length of follow-up message of one-step sync. * Validate the messageLength field of incoming messages. ------------------------------------------------------------------- Tue Nov 10 21:35:12 UTC 2020 - jbohac@suse.com - Update to version 3.1: * ts2phc: nmea: Drop time of day readings older than five seconds. * ts2phc: nmea: Update the leap seconds table on demand. * ts2phc: nmea: Add a configuration option for the current leap seconds file. * ts2phc: nmea: Add error messages for leap second lookup failures. * ts2phc: nmea: Correct UTC to TAI conversion. * posix_clock_open: derive PHC index from device name if possible * phc_ctl: display all capability information * ts2phc: Ignore pulses with invalid time stamps. * ts2phc: Fix memory leak. * ts2phc: Use proper close method on the error path. * port: Support slave event monitoring of delay timing data. * monitor: Add support for slave delay timing data TLV. * pmc: Show slave receive timing data TLVs attached to signaling messages. * port: Support slave event monitoring of Sync timing data. * clock: Create a slave event monitor. * Introduce a module for slave event monitoring. * Reject path trace TLVs with excessive elements. * Let the free running port state reflect the synchronization uncertain flag. * pmc: Support getting and setting the local synchronization uncertain flag. * Implement the synchronization uncertain flag. * Add support for write phase mode. * Decouple servo state from automotive profile. * ts2phc: Support using a GPS radio as the master clock. * Introduce a leap second table. * ts2phc: Support using a PHC as the master clock. * Introduce the ts2phc program. * pmc: Allow multiple local subscribers. * pmc: Subscribe to port state push notification events when requested. * clock: reset master/local rr when best clock id changes * unicast: Enable sharing master tables between ports. * Accept external PHC devices from the command line. * phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock. * Correct the signature of the legacy system offset measurement method. * ptp4l: Add configuration option for socket priority * sk: Recognize HWTSTAMP_FILTER_SOME * Improve G.8275.[12] example configs. * rtnl: add team activebackup support * Ignore signaling messages on target port mismatch. * Avoid fault when receiving zero length packets * phc2sys: Fix crash when trying to synchronize unadjustable clock. * Added support for opening POSIX clock devices * Allow ignoring source port identity in end to end mode. * port: correction of port name used port_open * Add example configuration for Automotive Profile. * Add ignore_source_id config option. * Add inhibit_announce config option. * Add BMCA config option. * port: Add configurable option to set asCapable. * timemaster: Allow ptp4l-specific sections in [ptp4l.conf]. * unicast: Process timeouts equal to current time. * snmp4lptp: added snmp4lptp.8 * Add possibility to set clockIdentity * Introduce the maxStepsRemoved attribute * config: Add hardware time stamp filter setting mode * snmp4lptp: Added function for data collection from ptp4l program. * snmp4lptp: Added communication to ptp4l via the UDS port. * snmp4lptp: Add snmp sub agent for linuxptp - re-introduce the _service file ------------------------------------------------------------------- Wed Jul 24 12:04:35 UTC 2019 - matthias.gerstner@suse.com - removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by firewalld, see [1]. [1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html ------------------------------------------------------------------- Mon Nov 26 12:43:06 UTC 2018 - Martin Pluskal - Update to stable release 2.0: * Peer-to-Peer Transparent Clock support * End-to-End Transparent Clock support * Unicast support * Support for all three Telecom Profiles + T-REC-G.8265.1-201407 + T-REC-G.8275.1-201606 + T-REC-G.8275.2-201708 - Changes for version 1.9.2: * Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9) * Command line support for every configuration variable via long options * IPoIB interface support * Improved Delay Request performance at high message rates * Improved UTC offset tracking * Multiple TLV support * NetSync Monitor protocol support * Peer to peer one-step * Support for bonded interfaces - No longer use _service ------------------------------------------------------------------- Tue Apr 3 12:27:38 UTC 2018 - jbohac@suse.com Update to version 1.9+git1.gd14f11f: * Expand and rationalize time stamping options. * Introduce peer to peer one step. * pmc: add long options and configuration file * port: Implement the NetSync Monitor protocol. * Introduce an option to ignore the transport specific field. * clock: add option to specify initial path delay. * sk: turn warnings about unexpected RX filter into debug messages. ------------------------------------------------------------------- Thu Feb 8 12:08:37 UTC 2018 - jbohac@suse.com - change the versioning scheme, resulting in version 1.8+git65.g303b08c ------------------------------------------------------------------- Thu Feb 8 08:51:50 UTC 2018 - mpluskal@suse.com - Update to version v1.8+git.20180101 (bsc#1050682): * clock: Don't forward management requests to UDS port. * Add an acknowledgment in the readme for Meinberg. * phc2sys: update '-s' option * sk: don't leak socket when reading of IB GUID fails. * Add compile time sanity check for interface name lengths. * phc_ctl: fix adj command to accept negative offset. * port: return timestamping iface in port properties * phc2sys: re-create clock clkid and servo when phc index changed * phc2sys: split servo_add from function clock_add * transport: pass struct interface to transport_open ------------------------------------------------------------------- Thu Nov 23 13:47:15 UTC 2017 - rbrown@suse.com - Replace references to /var/adm/fillup-templates with new %_fillupdir macro (boo#1069468) ------------------------------------------------------------------- Mon Jul 10 11:45:01 UTC 2017 - jengelh@inai.de - Remove future goals from description. ------------------------------------------------------------------- Fri Jun 30 06:45:51 UTC 2017 - mpluskal@suse.com - Cleanup spec file with spec-cleaner - Use url for source - Use kernel-devel instead full source ------------------------------------------------------------------- Thu May 25 12:20:17 UTC 2017 - lpechacek@suse.com - upgraded to 1.8 - new tools: timemaster, phc_ctl ------------------------------------------------------------------- Wed Sep 3 01:41:37 CEST 2014 - ro@suse.de - sanitize release line in specfile ------------------------------------------------------------------- Thu Mar 27 12:16:20 UTC 2014 - lpechacek@suse.com - updated How To to mention ethtool (bnc#865358) ------------------------------------------------------------------- Wed Mar 26 16:51:51 CET 2014 - jbohac@suse.cz - convert to systemd (bnc#865355) - two separate services (ptp4l and phc2sys) instead of linuxptp - two separate config files: /etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of /etc/sysconfig/linuxptp ------------------------------------------------------------------- Tue Feb 18 18:59:56 CET 2014 - jbohac@suse.cz - upgraded to 1.4 - fixed FSF address in init file ------------------------------------------------------------------- Fri Jul 26 10:12:08 UTC 2013 - lpechacek@suse.com - added Linux PTP Howto ------------------------------------------------------------------- Thu Jun 6 09:26:54 UTC 2013 - lpechacek@suse.com - adjusted sysconfig defaults to match changes made to phc2sys behavior ------------------------------------------------------------------- Wed Jun 5 16:00:18 CEST 2013 - jbohac@suse.cz - upgraded to 1.2.git74e70372 ------------------------------------------------------------------- Tue Apr 23 16:50:16 CEST 2013 - jbohac@suse.cz - upgraded to 1.2 ------------------------------------------------------------------- Mon Mar 25 15:44:25 UTC 2013 - lpechacek@suse.com - reviewed by Security (bnc#809336) ------------------------------------------------------------------- Fri Mar 15 11:23:35 UTC 2013 - cfarrell@suse.com - license update: GPL-2.0+ No indication of a GPL version 2 only license. Also, use SPDX format where possible ------------------------------------------------------------------- Wed Mar 6 10:44:35 UTC 2013 - lpechacek@suse.com - upgraded to 1.1 ------------------------------------------------------------------- Fri Feb 15 05:37:47 UTC 2013 - lpechacek@suse.com - initial packaging