- Update to version 3.1:
* ts2phc: nmea: Drop time of day readings older than five seconds.
* ts2phc: nmea: Update the leap seconds table on demand.
* ts2phc: nmea: Add a configuration option for the current leap seconds file.
* ts2phc: nmea: Add error messages for leap second lookup failures.
* ts2phc: nmea: Correct UTC to TAI conversion.
* posix_clock_open: derive PHC index from device name if possible
* phc_ctl: display all capability information
* ts2phc: Ignore pulses with invalid time stamps.
* ts2phc: Fix memory leak.
* ts2phc: Use proper close method on the error path.
* port: Support slave event monitoring of delay timing data.
* monitor: Add support for slave delay timing data TLV.
* pmc: Show slave receive timing data TLVs attached to signaling messages.
* port: Support slave event monitoring of Sync timing data.
* clock: Create a slave event monitor.
* Introduce a module for slave event monitoring.
* Reject path trace TLVs with excessive elements.
* Let the free running port state reflect the synchronization uncertain flag.
* pmc: Support getting and setting the local synchronization uncertain flag.
* Implement the synchronization uncertain flag.
* Add support for write phase mode.
* Decouple servo state from automotive profile.
* ts2phc: Support using a GPS radio as the master clock.
* Introduce a leap second table.
* ts2phc: Support using a PHC as the master clock.
* Introduce the ts2phc program.
* pmc: Allow multiple local subscribers.
* pmc: Subscribe to port state push notification events when requested.
* clock: reset master/local rr when best clock id changes
* unicast: Enable sharing master tables between ports.
* Accept external PHC devices from the command line.
* phc2sys: Fix frequency estimation when synchronizing a PHC to the system clock.
* Correct the signature of the legacy system offset measurement method.
* ptp4l: Add configuration option for socket priority
* sk: Recognize HWTSTAMP_FILTER_SOME
* Improve G.8275.[12] example configs.
* rtnl: add team activebackup support
* Ignore signaling messages on target port mismatch.
* Avoid fault when receiving zero length packets
* phc2sys: Fix crash when trying to synchronize unadjustable clock.
* Added support for opening POSIX clock devices
* Allow ignoring source port identity in end to end mode.
* port: correction of port name used port_open
* Add example configuration for Automotive Profile.
* Add ignore_source_id config option.
* Add inhibit_announce config option.
* Add BMCA config option.
* port: Add configurable option to set asCapable.
* timemaster: Allow ptp4l-specific sections in [ptp4l.conf].
* unicast: Process timeouts equal to current time.
* snmp4lptp: added snmp4lptp.8
* Add possibility to set clockIdentity
* Introduce the maxStepsRemoved attribute
* config: Add hardware time stamp filter setting mode
* snmp4lptp: Added function for data collection from ptp4l program.
* snmp4lptp: Added communication to ptp4l via the UDS port.
* snmp4lptp: Add snmp sub agent for linuxptp
- re-introduce the _service file
- removal of SuSEfirewall2 service, since SuSEfirewall2 has been replaced by
firewalld, see [1].
[1]: https://lists.opensuse.org/opensuse-factory/2019-01/msg00490.html
- Update to stable release 2.0:
* Peer-to-Peer Transparent Clock support
* End-to-End Transparent Clock support
* Unicast support
* Support for all three Telecom Profiles
+ T-REC-G.8265.1-201407
+ T-REC-G.8275.1-201606
+ T-REC-G.8275.2-201708
- Changes for version 1.9.2:
* Fixed stack buffer overflow in the new NetSync Monitor code (since 1.9)
* Command line support for every configuration variable via long options
* IPoIB interface support
* Improved Delay Request performance at high message rates
* Improved UTC offset tracking
* Multiple TLV support
* NetSync Monitor protocol support
* Peer to peer one-step
* Support for bonded interfaces
- No longer use _service
Update to version 1.9+git1.gd14f11f:
* Expand and rationalize time stamping options.
* Introduce peer to peer one step.
* pmc: add long options and configuration file
* port: Implement the NetSync Monitor protocol.
* Introduce an option to ignore the transport specific field.
* clock: add option to specify initial path delay.
* sk: turn warnings about unexpected RX filter into debug messages.
- change the versioning scheme, resulting in version
1.8+git65.g303b08c
- Update to version v1.8+git.20180101 (bsc#1050682):
* clock: Don't forward management requests to UDS port.
* Add an acknowledgment in the readme for Meinberg.
* phc2sys: update '-s' option
* sk: don't leak socket when reading of IB GUID fails.
* Add compile time sanity check for interface name lengths.
* phc_ctl: fix adj command to accept negative offset.
* port: return timestamping iface in port properties
* phc2sys: re-create clock clkid and servo when phc index changed
* phc2sys: split servo_add from function clock_add
* transport: pass struct interface to transport_open
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
- Remove future goals from description.
- Cleanup spec file with spec-cleaner
- Use url for source
- Use kernel-devel instead full source
- upgraded to 1.8
- new tools: timemaster, phc_ctl
- sanitize release line in specfile
- updated How To to mention ethtool (bnc#865358)
- convert to systemd (bnc#865355)
- two separate services (ptp4l and phc2sys) instead of linuxptp
- two separate config files:
/etc/syscconfig/ptp4l and /etc/sysconfig/phc2sys instead of
/etc/sysconfig/linuxptp
- upgraded to 1.4
- fixed FSF address in init file
- added Linux PTP Howto
- adjusted sysconfig defaults to match changes made to phc2sys
behavior
- upgraded to 1.2.git74e70372
- upgraded to 1.2
- reviewed by Security (bnc#809336)
- license update: GPL-2.0+
No indication of a GPL version 2 only license. Also, use SPDX format
where possible
- upgraded to 1.1
- initial packaging
OBS-URL: https://build.opensuse.org/request/show/847615
OBS-URL: https://build.opensuse.org/package/show/network:time/linuxptp?expand=0&rev=18
ca60cd50b5