52 lines
1.4 KiB
Plaintext
52 lines
1.4 KiB
Plaintext
Quickstart guide for self made serial receivers
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Please read /usr/share/doc/packages/lirc/html/install.html for
|
|
details.
|
|
|
|
Suppose you have a self made serial receiver as described in
|
|
http://www.lirc.org/receivers.html connected to the first serial
|
|
port serial port:
|
|
|
|
Ensure that the following values are set in /etc/sysconfig/lirc:
|
|
|
|
LIRCD_DEVICE="/dev/lirc"
|
|
LIRCD_DRIVER="default"
|
|
LIRC_MODULE="lirc_serial"
|
|
|
|
Run the following command and add it at the end of
|
|
/etc/init.d/boot.local:
|
|
|
|
setserial /dev/ttyS0 uart none
|
|
|
|
Load the kernel module for the serial receiver:
|
|
|
|
modprobe lirc_serial
|
|
|
|
|
|
Run irrecord to assign names to keys on your remote. Move the
|
|
resulting config file to /etc/lircd.conf. Start lircd:
|
|
|
|
rclirc start
|
|
|
|
If everything works (check with 'irw'), add lirc to the boot
|
|
process:
|
|
|
|
chkconfig lirc on
|
|
|
|
|
|
Quickstart guide for remotes that show up as event devices
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
The remotes of most DVB devices show up as event devices in
|
|
/dev/input/. If you have one of those
|
|
|
|
- check whether udev already created /dev/input/ir for you when you
|
|
plugged in the device. Edit /etc/udev/rules.d/51-lirc.rules if it
|
|
didn't. Unplug the device and plug it in again to make
|
|
/dev/input/ir appear.
|
|
|
|
- cp /usr/share/lirc/remotes/linux-input-layer-lircd.conf
|
|
/etc/lircd.conf
|
|
|
|
- rclirc start; chkconfig lirc on
|