- mdmon-takeover.fix

find-free-devnum.fix
  mapfile-rebuild.fix
  udev-offroot
   Fix various issues will installation on IMSM
  RAID arrays, booting from those arrays, and
  clean shutdown when such an array is used for '/'.
  (bnc#752107 bnc#732294 bnc#770351)

OBS-URL: https://build.opensuse.org/package/show/Base:System/mdadm?expand=0&rev=69

boot.md

@@ -100,7 +100,7 @@ case "$1" in
 	
 	mkdir -p /run/mdadm
 	# restart mdmon (exits silently if there is nothing to monitor)
-	/sbin/mdmon --all --takeover
+	/sbin/mdmon --all --takeover --offroot
 	# Check for existence of needed config file and read it
 	[ -r $mdadm_SYSCONFIG ] || _rc_exit 6 "... $mdadm_SYSCONFIG not existing "
 

find-free-devnum.fix

@@ -0,0 +1,32 @@
+From fb52f2457a4df4f7061be7a0524763193a6355a7 Mon Sep 17 00:00:00 2001
+From: NeilBrown <neilb@suse.de>
+Date: Mon, 20 Aug 2012 10:50:42 +1000
+Subject: [PATCH] find_free_devnum: avoid auto-using names in /etc/mdadm.conf
+
+high-number names like "/dev/md126" shouldn't be in /etc/mdadm.conf,
+but if they are they should be ignored when choosing an
+unused number.
+
+Signed-off-by: NeilBrown <neilb@suse.de>
+
+---
+ util.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- mdadm-3.2.5.orig/util.c
++++ mdadm-3.2.5/util.c
+@@ -796,10 +796,14 @@ int find_free_devnum(int use_partitions)
+ 	     devnum = devnum ? devnum-1 : (1<<20)-1) {
+ 		char *dn;
+ 		int _devnum;
++		char nbuf[50];
+ 
+ 		_devnum = use_partitions ? (-1-devnum) : devnum;
+ 		if (mddev_busy(_devnum))
+ 			continue;
++		sprintf(nbuf, "%s%d", use_partitions?"mdp":"md", devnum);
++		if (!conf_name_is_free(nbuf))
++			continue;
+ 		/* make sure it is new to /dev too, at least as a
+ 		 * non-standard */
+ 		dn = map_dev(dev2major(_devnum), dev2minor(_devnum), 0);

mapfile-rebuild.fix

@@ -0,0 +1,29 @@
+From a74e5731ba8c32f74c60e45c244735d602d14dca Mon Sep 17 00:00:00 2001
+From: NeilBrown <neilb@suse.de>
+Date: Mon, 20 Aug 2012 12:34:28 +1000
+Subject: [PATCH] mapfile: fix mapfile rebuild for containers
+
+When recreating the mapfile entry for a container we need to
+use ->getinfo_super, not ->container_content, just like we
+do in Detail().
+
+Signed-off-by: NeilBrown <neilb@suse.de>
+
+diff --git a/mapfile.c b/mapfile.c
+index fa23883..6712733 100644
+--- a/mapfile.c
++++ b/mapfile.c
+@@ -403,7 +403,12 @@ void RebuildMap(void)
+ 			close(dfd);
+ 			if (ok != 0)
+ 				continue;
+-			info = st->ss->container_content(st, subarray);
++			if (subarray)
++				info = st->ss->container_content(st, subarray);
++			else {
++				info = malloc(sizeof(*info));
++				st->ss->getinfo_super(st, info, NULL);
++			}
+ 			if (!info)
+ 				continue;
+ 

mdadm.changes

@@ -1,3 +1,15 @@
+-------------------------------------------------------------------
+Mon Aug 20 06:53:24 UTC 2012 - nfbrown@suse.com
+
+- mdmon-takeover.fix
+  find-free-devnum.fix
+  mapfile-rebuild.fix
+  udev-offroot
+   Fix various issues will installation on IMSM
+  RAID arrays, booting from those arrays, and
+  clean shutdown when such an array is used for '/'.
+  (bnc#752107 bnc#732294 bnc#770351)
+
 -------------------------------------------------------------------
 Thu Jul 26 16:50:03 UTC 2012 - fcrozat@suse.com
 

mdadm.shutdown

@@ -0,0 +1,4 @@
+#!/bin/sh
+# We need to ensure all md array with external metadata
+# (e.g. IMSM) are clean before completing the shutdown.
+/sbin/mdadm --wait-clean --scan

mdadm.spec

@@ -38,9 +38,14 @@ Source4:        boot.md
 Source5:        mkinitrd-setup.sh
 Source6:        mkinitrd-boot.sh
 Source7:        mdadm.cron
+Source8:        mdadm.shutdown
 Patch1:         udev-rules.fix
 Patch2:         mdmon-arg.fix
 Patch3:         blkid-builtin.patch
+Patch4:         mdmon-takeover.fix
+Patch5:         find-free-devnum.fix
+Patch6:         mapfile-rebuild.fix
+Patch7:         udev-offroot
 
 %description
 Mdadm is a program that can be used to control Linux md devices. It is
@@ -52,6 +57,10 @@ programs but with a very different interface.
 %patch1 -p1
 %patch2 -p1
 %patch3 -p1
+%patch4 -p1
+%patch5 -p1
+%patch6 -p1
+%patch7 -p1
 
 %build
 make %{?_smp_mflags} CC="%__cc" CXFLAGS="$RPM_OPT_FLAGS -Wno-error"
@@ -76,6 +85,8 @@ rm -rf $RPM_BUILD_ROOT/run/mdadm
 mkdir -p $RPM_BUILD_ROOT/run/mdadm
 install -d $RPM_BUILD_ROOT/lib/udev/rules.d
 install -m 644 udev-md-raid.rules $RPM_BUILD_ROOT/lib/udev/rules.d/64-md-raid.rules
+install -d $RPM_BUILD_ROOT/lib/systemd/system-shutdown
+install -m 755 %{S:8} $RPM_BUILD_ROOT/lib/systemd/system-shutdown/mdadm.shutdown
 
 %post
 [ -x /sbin/mkinitrd_setup ] && mkinitrd_setup
@@ -130,5 +141,8 @@ rm -rf $RPM_BUILD_ROOT
 %dir /etc
 %dir /etc/cron.daily
 /etc/cron.daily/mdadm
+%dir /lib/systemd
+%dir /lib/systemd/system-shutdown
+/lib/systemd/system-shutdown/mdadm.shutdown
 
 %changelog

mdmon-takeover.fix

@@ -0,0 +1,31 @@
+From a99d3469713138f050cccb8657c24a05ffa7057e Mon Sep 17 00:00:00 2001
+From: NeilBrown <neilb@suse.de>
+Date: Mon, 20 Aug 2012 10:37:21 +1000
+Subject: [PATCH] mdmon: allow --takeover when original was started with
+ --offroot
+
+As --offroot causes ARGV[0] to be changed, we need to be more
+lenient when checking that the mdmon we are about to kill really
+is mdmon.  i.e. allow name to be "@dmon" instead.
+
+Signed-off-by: NeilBrown <neilb@suse.de>
+
+---
+ mdmon.c |    6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- mdadm-3.2.5.orig/mdmon.c
++++ mdadm-3.2.5/mdmon.c
+@@ -184,7 +184,11 @@ static void try_kill_monitor(pid_t pid,
+ 	buf[sizeof(buf)-1] = 0;
+ 	close(fd);
+ 
+-	if (n < 0 || !strstr(buf, "mdmon"))
++	/* Note that if started with --offroot, the name
++	 * might be "@dmon"
++	 */
++	if (n < 0 || !(strstr(buf, "mdmon") ||
++		       strstr(buf, "@dmon")))
+ 		return;
+ 
+ 	kill(pid, SIGTERM);

mkinitrd-boot.sh

@@ -102,34 +102,34 @@ md_assemble()
 	"")
 		;;
 	/dev/*)
-		$mdadm -A $mdconf $container
+		$mdadm -A $mdconf $container --offroot
 		;;
 	[0-9a-f]*[0-9a-f])
 		container_name=$(get_md_name "$container")
 		if test -z "$container_name"; then
 			container_name=/dev/md/container
 		fi
-		$mdadm -A $mdconf --uuid="$container" "$container_name"
+		$mdadm -A $mdconf --uuid="$container" "$container_name" --offroot
 		;;
 	*)
 		echo "unrecognized container for $dev: $container"
 	esac
 	if test -n "$dev"; then
-		$mdadm -A $mdconf "$dev"
+		$mdadm -A $mdconf "$dev" --offroot
 	else
 		dev=$(get_md_name "$uuid")
 		if test -z "$dev"; then
 			# mdadm will pick a device name
-			$mdadm -A $mdconf --uuid=$uuid
+			$mdadm -A $mdconf --uuid=$uuid --offroot
 		else
-			$mdadm -A $mdconf --uuid=$uuid "$dev"
+			$mdadm -A $mdconf --uuid=$uuid "$dev" --offroot
 		fi
 	fi
 }
 
 # run any degraded arrays assembled incrementally
 wait_for_events
-$mdadm --incremental --run --scan
+$mdadm --incremental --run --scan --offroot
 md_assemble "$resumedev"
 md_assemble "$rootdev"
 if [ -n "$md_dev" ] ; then

mkinitrd-setup.sh

@@ -28,7 +28,12 @@ for bd in $blockdev ; do
 	    ;;
     esac
     # Check if this device is already added (possible for partitionable).
+    md_dev=`mdadm -D --export $bd | sed -n -e 's/^MD_DEVNAME=//p'`
+    if [ -z "$md_dev" ]; then
         md_dev=${bd##/dev/}
+    else
+	bd="/dev/md/$md_dev"
+    fi
     dup_found=false
     for dup in $md_devs; do
 	if [ x"$dup" = x"$md_dev" ]; then
@@ -62,12 +67,14 @@ for bd in $blockdev ; do
         ;;
     /dev/*)
         mdconf="$(mdadm -Db "$container")\\n$mdconf"
+	cont_list="$cont_list $container"
         ;;
     [0-9a-f]*[0-9a-f])
         if test -z "$mdadm_conf"; then
             mdadm_conf=$(mdadm --examine --brief --scan)
         fi
         mdconf="$(echo "$mdadm_conf" | grep "UUID=$container")\\n$mdconf"
+	cont_list="$cont_list $container"
         ;;
     *)
         echo "unrecognized container for $md_dev: $container"

udev-offroot

@@ -0,0 +1,18 @@
+Use --offroot flag when assembling md arrays.
+
+This ensures that mdmon won't be killed by systemd.
+---
+ udev-md-raid.rules |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- mdadm-3.2.5.orig/udev-md-raid.rules
++++ mdadm-3.2.5/udev-md-raid.rules
+@@ -10,7 +10,7 @@ LABEL="md_inc"
+ 
+ # remember you can limit what gets auto/incrementally assembled by
+ # mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY'
+-ACTION=="add", RUN+="/sbin/mdadm --incremental $tempnode"
++ACTION=="add", RUN+="/sbin/mdadm --incremental $tempnode --offroot"
+ ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/sbin/mdadm -If $name --path $env{ID_PATH}"
+ ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/sbin/mdadm -If $name"
+