------------------------------------------------------------------- Fri Jun 20 14:28:20 CEST 2008 - mmarek@suse.cz - updated to 2.6.7 + fixes from git * Avoid segfault when parsing /proc/mdstat with auto-read-only arrays. * For v0.90 superblocks, print the 'Events' count as a real count, not 2 numbers separated by a dot. * Allow creation of a RAID6 with exactly one missing device. * Use LOG_PID for syslog, so you get the pid of mdadm in the log files. * --export now works with --examine too (not just --detail) * Improve auto-creation of device special file when using --incremental * Simple locking for --incremental so mdadm doesn't get confused when run concurrently with itself. * Make --incremental cope better with arrays that are being reshaped. * Fix autoassemble for stack arrays. - remove /tmp/mdadm.conf in boot.md (bnc#401138) ------------------------------------------------------------------- Wed Apr 30 15:57:14 CEST 2008 - mmarek@suse.cz - added some fixes from Neil's git repo, fixing bnc#368704 among others ------------------------------------------------------------------- Mon Feb 4 19:24:54 CET 2008 - mmarek@suse.cz - correctly display rc_status in boot.md ------------------------------------------------------------------- Wed Jan 23 15:55:24 CET 2008 - mmarek@suse.cz - fixed auto-assembly part of boot.md * if /etc/mdadm.conf is empy or only contains whitespace or comments, no autoassembly is done * remove /tmp/mdadm.conf even if a directory [#329678] - dropped mdrun and raidautorun (no longer needed) ------------------------------------------------------------------- Wed Oct 24 17:08:11 CEST 2007 - mmarek@suse.cz - updated to 2.6.4 * Make "--create --auto=mdp" work for non-standard device names. * Fix restarting of a 'reshape' if it was stopped in the middle. * Fix a segfault when using v1 superblock. * Make --write-mostly effective when re-adding a device to an array. * Various minor fixes - changes in 2.6.3: * allow --write-behind to be set for --grow. * When adding new disk to an array, don't reserve so much bitmap space that the disk cannot store the required data. (Needed when 1.x array was created with older mdadm). * When adding a drive that was a little too small, we did not get the correct error message. * Make sure that if --assemble find an array in the critical region of a reshape, and cannot find the critical data to restart the reshape, it gives an error message. * Fix segfault with '--detail --export' and non-persistent superblocks. * Various manpage updates. * Improved 'raid4' support (--assemble, --monitor) * Option parsing fixes w.r.t -a * Interpret "--assemble --metadata=1" to allow any version 1.x metadata, and be more specific in the "metadata=" message printed with --examine --brief * Fix spare migration in --monitor. ------------------------------------------------------------------- Fri Jul 27 13:01:01 CEST 2007 - mmarek@suse.cz - changes to the init script [#288454] * don't try to autoassemble if /etc/mdadm.conf exists (even an empty one) * ony autoassemble partitions found in /proc/partitions ------------------------------------------------------------------- Fri Jul 13 15:02:21 CEST 2007 - mmarek@suse.cz - updated to 2.6.2 * --fail detached and --remove faulty can be used to fail and remove devices that are no longer physically present. * --export option for --detail or present information in a format that can be processed by udev. * fix internal bitmap allocation problems with v1.1, v1.2 metadata. * --help now goes to stdout so you can direct it to a pager. * Various manpage updates. * Make "--grow --add" for linear arrays really work. * --auto-detect to trigger in-kernel autodetect. * Make return code for "--detail --test" more reliable. Missing devices as well as failed devices cause an error. - added some fixes from Neil's git repo (mdadm-git-fixes.patch) ------------------------------------------------------------------- Thu Jun 21 15:58:37 CEST 2007 - adrian@suse.de - fix changelog entry order ------------------------------------------------------------------- Mon Apr 2 15:00:10 CEST 2007 - mmarek@suse.cz - updated to 2.6.1 * --monitor was producing some meaningless warnings due to a bug. * Fix some compiler warnings. * Fully support --grow for raid6. If a reshape crashed during the critical period, mdadm wouldn't restore the Q information properly. * Update documentation for --grow. * Report bitmap status in --detail and --examine * Default to v1 superblocks instead of v0.90 if the array is too big for 0.90 to handle. * Sort the output of "mdadm --detail --scan" so that it is in a suitable order for assembling arrays. i.e. components come before an array that they are part of. * Require bitmap files to have a '/' in their name. * Rewrite 'reshape' support including performing a backup of the critical region for a raid5 growth, and restoring that backup after a crash. * Put a 'canary' at each end of the backup so a corruption can be more easily detected. * Support --backup-file for backing-up critical section during growth. * Erase old superblocks (of different versions) when creating new array. * Allow --monitor to work with arrays with >28 devices * Report reshape information in --detail * Handle symlinks in /dev better * Fix mess in --detail output which a device is missing. * Support 'bitmap=' in mdadm.conf for auto-assembling arrays with write-intent bitmaps in separate files. * Fix alignment problem in version-1 superblocks. NOTE: This is an incompatable change affecting raid5 reshape. If you want to reshape a raid5 using version-1 superblocks, use 2.6.17-rc2 or later, and mdadm-2.4.1 or later. * Support 'mailfrom' line in mdadm.conf so the From: line in alert emails can be explicitly set. * Arrange that SparesMissing (which is similar in import to DegradedArray) generates an Email. * Assume "DEVICE partitions" if no DEVICE line is given. * Support new 'offset' layout for raid10. * When creating a bitmap file, choose a chunksize to limit number of bitmap chunks to 2 million. More than this can cause kmalloc failure. * New 'CREATE' line in mdadm.conf for defaults such as owner, group, mode and auto-flag * --detail checks if array has been started or not and includes that in report. * When using --update=uuid on an array with a bitmap, update the bitmap's uuid too. * Add a copy of /proc/mdstat to the mail message sent by mdadm --monitor. * New flag --no-degraded to avoid starting arrays if there are fewer devices available than last time the array was started. This is only needed with --scan, as with --scan, that behaviour is the default. * Support for 'homehost' concept. This is a fairly major update. It includes a configfile option and a command line option for specifying a homehost, records that host in the superblock, and reports the homehost where possible. * Support for Auto Assembly. "mdadm -As" will, if provided with the name of a homehost, try to assemble all arrays it can find that were created for that homehost. See man pages for more details. * Don't try to create devices with --manage or --grow * allow default metadata (superblock) type to be specified in mdadm.conf * Avoid some misdetection of overlapping partitions * Add 'Array Slot' line to --examine for version-1 superblocks to make it a bit easier to see what is happening. * Work around bug in --add handling for version-1 superblocks in 2.6.17 (and prior). * Make -assemble a bit more resilient to finding strange information in superblocks. * When creating devices in /dev/md/ create matching symlinks from /dev. e.g. /dev/md0 -> /dev/md/0. Allow this to be disabled in mdadm.conf or on command line. * Allow a number (of partitions) after the 'yes' option to --auto= This is particularly useful in the 'create' line in mdadm.conf. * Remove partitions from any whole device that is made part of an md array. This is a work-around for annoying messages when the first block on some drive accidentally looks like a partition table. * Close stray fd in mdassemble so that it can assemble stacked devices * If mdassemble finds an array already assembled, it marks it read-write. * Remove error in md_open if array is already active. This isn't needed and gets in the ways if an array was created e.g. in initramfs, but device doesn't yet exist in /dev. * When --assemble --scan is run, if all arrays that could be found have already been started, don't report an error. * Allow --assemble --force to mark a raid6 clean when it has two missing devices (which is needed else if won't assemble. Without this fix it would only assemble if one or zero missing devices. * Support --update=devicesize for cases where the underlying device can change size. * Default to --auto=yes so the array devices with 'standard' names get created automatically, as this is almost always what is wanted. * Give useful message if raid4/5/6 cannot be started because it is not clean and is also degraded. * Increase raid456 stripe cache size if needed to --grow the array. The setting used unfortunately requires intimate knowledge of the kernel, and it not reset when the reshape finishes. * Change 'Device Size' to 'Used Dev Size' because it only shows how much of each device is actually used, not how big they are. * --wait or -W will wait for resync activity to finish on the given devices. * If two drives in a raid5 disappear at the same time, then "-Af" will add them both in rather than just one and forcing the array to 'clean'. This is slightly safer in some cases. * Don't hold md device open for so long in --monitor mode - map_dev can be slow and interferes with trying to stop the array. * Support --uuid= with --create to choose your own UUID. * New major more "--incremental" for incremental assemble of arrays, intended for use with udev. * lots of bugfixes * manpage updates ------------------------------------------------------------------- Wed Jan 10 11:58:14 CET 2007 - mmarek@suse.cz - use raidautorun instead of mdrun to autodetect the raid arrays in boot.md [#230733] ------------------------------------------------------------------- Wed Nov 8 10:51:13 CET 2006 - prusnak@suse.cz - fixed subscript out of range [#212697] ------------------------------------------------------------------- Wed Sep 20 17:17:22 CEST 2006 - mjancar@suse.cz - update to 2.5.3 * lots bugfixes * drop all patches (integrated upstream) ------------------------------------------------------------------- Fri Jul 28 13:12:47 CEST 2006 - olh@suse.de - remove dropped boot.ibmsis from boot.md - boot.rootfsck should start before boot.md (#181972) ------------------------------------------------------------------- Fri Jul 21 14:16:28 CEST 2006 - olh@suse.de - remove boot.proc from Required-Start: in boot.md (#178753) ------------------------------------------------------------------- Wed May 3 13:12:42 CEST 2006 - mjancar@suse.cz - fix false SparesMissing error (#171326) ------------------------------------------------------------------- Wed Apr 26 09:46:28 CEST 2006 - hare@suse.de - Fix init script dependencies - Implement MDADM_DEVICE_TIMEOUT to set a timeout for udevsettle (#149979) ------------------------------------------------------------------- Tue Apr 25 13:39:38 CEST 2006 - mjancar@suse.cz - add static device nodes for udev (#168824) ------------------------------------------------------------------- Wed Apr 19 10:27:19 CEST 2006 - mjancar@suse.cz - set $BOOT_MD_USE_MDADM_CONFIG to "yes" by default (#155120) ------------------------------------------------------------------- Fri Apr 7 11:33:15 CEST 2006 - mjancar@suse.cz - detach mdadmd from tty in rcmdadmd (#160881) ------------------------------------------------------------------- Mon Apr 3 09:54:55 CEST 2006 - mjancar@suse.cz - fix garbled output with --detail (#160827) - fix fix write-mostly with --add and --re-add (#162968) ------------------------------------------------------------------- Fri Mar 24 21:31:54 CET 2006 - mjancar@suse.cz - add /sbin/raidautorun (#159460) ------------------------------------------------------------------- Wed Mar 8 18:33:12 CET 2006 - mjancar@suse.cz - add $BOOT_MD_USE_MDADM_CONFIG sysconfig variable (#155120) ------------------------------------------------------------------- Thu Feb 9 16:59:52 CET 2006 - mjancar@suse.cz - round free size to chunk size multiply on --create (#148562) ------------------------------------------------------------------- Tue Feb 7 08:59:50 CET 2006 - mjancar@suse.cz - move boot.multipath to Should-Start instead of Required-Start ------------------------------------------------------------------- Mon Feb 6 15:27:47 CET 2006 - mjancar@suse.cz - add "Obsoletes: raidtools" - start boot.md after boot.multipath - call mdadm without -a from mdrun, an argument is required in 2.2 ------------------------------------------------------------------- Mon Feb 6 11:36:26 CET 2006 - mjancar@suse.de - don't start mdadmd by default ------------------------------------------------------------------- Sun Feb 5 20:46:43 CET 2006 - mjancar@suse.cz - include option for email to be sent on start (#142105) - fix missing md autostart due to raidtools dropped (#148234) * include mdrun script from Debian * create boot.md initscipt ------------------------------------------------------------------- Sun Feb 5 17:46:32 CET 2006 - schwab@suse.de - Fix memset parameters. ------------------------------------------------------------------- Thu Feb 2 12:30:26 CET 2006 - mjancar@suse.cz - fix segfault on --assemble (#146514) ------------------------------------------------------------------- Fri Jan 27 02:12:42 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Wed Jan 25 10:48:18 CET 2006 - olh@suse.de - fix uninitialized variable, memset call and memcmp/memcpy bug mdadm.bug144647-array.init.patch mdadm.bug144647-update_super1-memcpy.patch mdadm.bug144647-add_internal_bitmap0-memcpy.patch ------------------------------------------------------------------- Wed Jan 11 13:49:54 CET 2006 - mjancar@suse.cz - update ro 2.2 ------------------------------------------------------------------- Tue Dec 20 12:57:25 CET 2005 - ro@suse.de - at least output errors if they occur (instead of ignoring) ------------------------------------------------------------------- Wed Nov 30 17:19:24 CET 2005 - schwab@suse.de - Fix broken formats. ------------------------------------------------------------------- Tue Oct 25 09:53:57 CEST 2005 - aj@suse.de - Build with -fno-strict-aliasing. ------------------------------------------------------------------- Wed Oct 12 20:18:00 CEST 2005 - mjancar@suse.cz - update to 2.1 ------------------------------------------------------------------- Thu Jul 28 20:28:32 CEST 2005 - anicka@suse.cz - update to 1.12.0 ------------------------------------------------------------------- Wed Jun 15 13:16:42 CEST 2005 - meissner@suse.de - use RPM_OPT_FLAGS correctly. ------------------------------------------------------------------- Tue Apr 19 13:48:24 CEST 2005 - postadal@suse.de - updated to version 1.11.0 - fixed for gcc 4.0 - removed obsoleted patch config-fix ------------------------------------------------------------------- Wed Mar 30 13:24:23 CEST 2005 - postadal@suse.cz - fixed parsing command line option '--config=partions' [#74603] ------------------------------------------------------------------- Fri Feb 4 13:09:49 CET 2005 - postadal@suse.cz - updated to version 1.9.0 ------------------------------------------------------------------- Thu Jan 13 17:24:55 CET 2005 - postadal@suse.cz - updated to version 1.8.1 - extended comment in sysconfig.mdadm [#48567] ------------------------------------------------------------------- Fri Aug 06 12:09:58 CEST 2004 - postadal@suse.cz - updated to version 1.6.0 * added --auto= and --assume-clean options * added "degraded" and "recovering" options to the "Status:" entry ------------------------------------------------------------------- Tue Feb 10 13:45:52 CET 2004 - postadal@suse.cz - updated to version 1.5.0 * new commands "mdassemble" * support for raid6 as found in 2.6.2 * support partitioned md arrays with a different major number and naming scheme * added "SparesMissing" event when --monitor first sees an array and it doesn't have the enough spare devices. ------------------------------------------------------------------- Sun Jan 11 11:50:04 CET 2004 - adrian@suse.de - add %defattr ------------------------------------------------------------------- Mon Dec 1 10:53:02 CET 2003 - fehr@suse.de - fix quoting problem in start script (#33392) ------------------------------------------------------------------- Fri Aug 29 09:36:24 CEST 2003 - fehr@suse.de - add PreReq for fillup ------------------------------------------------------------------- Tue Aug 26 10:23:44 CEST 2003 - fehr@suse.de - add %stop_on_removal and %restart_on_update ------------------------------------------------------------------- Thu Aug 14 15:40:53 CEST 2003 - fehr@suse.de - add missing activation metadata in sysconfig (#28901) ------------------------------------------------------------------- Tue Jul 29 11:03:36 CEST 2003 - fehr@suse.de - update to new version 1.3.0 of package ------------------------------------------------------------------- Mon Apr 14 20:01:43 CEST 2003 - postadal@suse.cz - fixed init script (added return value for unimplemented reload function) ------------------------------------------------------------------- Mon Mar 31 17:37:03 CEST 2003 - postadal@suse.cz - added buildroot, init script, sysconfig - bzip2 sources and cleaned specfile ------------------------------------------------------------------- Thu Mar 20 16:18:13 CET 2003 - fehr@suse.de - update to version 1.2.0 of package ------------------------------------------------------------------- Mon Mar 3 12:16:22 CET 2003 - fehr@suse.de - update to version 1.1.0 of package ------------------------------------------------------------------- Mon Dec 2 11:30:52 CET 2002 - fehr@suse.de - Fix for new glibc/gcc ------------------------------------------------------------------- Tue Sep 17 17:34:28 CEST 2002 - ro@suse.de - removed bogus self-provides ------------------------------------------------------------------- Mon Sep 13 15:10:00 CEST 2002 - lmb@suse.de - Fix for 64bit arch; ioctl returns long instead of int (#20339) ------------------------------------------------------------------- Fri Aug 23 11:16:51 MEST 2002 - lmb@suse.de - Multipath arrays can now be build manually even without a superblock. - One debugging chunk removed from patch. ------------------------------------------------------------------- Tue Aug 13 14:43:02 MEST 2002 - lmb@suse.de - Fix for the assembly of multipath arrays. ------------------------------------------------------------------- Mon Aug 12 11:46:43 MEST 2002 - lmb@suse.de - Added patch to support the enhanced multipath features. ------------------------------------------------------------------- Mon Aug 5 16:05:19 CEST 2002 - fehr@suse.de - make SuSE package from version 1.0.1 of mdadm