From 64bf4dff34301a4b44883a8bc03f7835faef121e Mon Sep 17 00:00:00 2001 From: Lidong Zhong Date: Mon, 14 Sep 2020 10:52:18 +0800 Subject: [PATCH 01/17] Detail: show correct raid level when the array is inactive Git-commit: 64bf4dff34301a4b44883a8bc03f7835faef121e References: jsc#SLE-13700 Sometimes the raid level in the output of `mdadm -D /dev/mdX` is misleading when the array is in inactive state. Here is a testcase for introduction. 1\ creating a raid1 device with two disks. Specify a different hostname rather than the real one for later verfication. node1:~ # mdadm --create /dev/md0 --homehost TESTARRAY -o -l 1 -n 2 /dev/sdb /dev/sdc 2\ remove one of the devices and reboot 3\ show the detail of raid1 device node1:~ # mdadm -D /dev/md127 /dev/md127: Version : 1.2 Raid Level : raid0 Total Devices : 1 Persistence : Superblock is persistent State : inactive Working Devices : 1 You can see that the "Raid Level" in /dev/md127 is raid0 now. After step 2\ is done, the degraded raid1 device is recognized as a "foreign" array in 64-md-raid-assembly.rules. And thus the timer to activate the raid1 device is not triggered. The array level returned from GET_ARRAY_INFO ioctl is 0. And the string shown for "Raid Level" is str = map_num(pers, array.level); And the definition of pers is mapping_t pers[] = { { "linear", LEVEL_LINEAR}, { "raid0", 0}, { "0", 0} ... So the misleading "raid0" is shown in this testcase. Changelog: V1: don't show "Raid Level" when array is inactive Signed-off-by: Lidong Zhong Signed-off-by: Jes Sorensen Signed-off-by: Coly Li --- Detail.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Detail.c b/Detail.c index 24eeba0..b6587c8 100644 --- a/Detail.c +++ b/Detail.c @@ -224,7 +224,10 @@ int Detail(char *dev, struct context *c) } /* Ok, we have some info to print... */ - str = map_num(pers, array.level); + if (inactive) + str = map_num(pers, info->array.level); + else + str = map_num(pers, array.level); if (c->export) { if (array.raid_disks) { -- 2.26.2