- There are some important fixes merged in mdadm upstream which should go with jsc#SLE-13700. This is the update from upstream mdadm including the important fixes we should have. - Detail: show correct raid level when the array is inactive (jsc#SLE-13700) 0095-Detail-show-correct-raid-level-when-the-array-is-ina.patch - Don't create bitmap for raid5 with journal disk (jsc#SLE-13700) 0096-Don-t-create-bitmap-for-raid5-with-journal-disk.patch - Monitor: refresh mdstat fd after select (jsc#SLE-13700) 0097-Monitor-refresh-mdstat-fd-after-select.patch - Monitor: stop notifing about containers. (jsc#SLE-13700) 0098-Monitor-stop-notifing-about-containers.patch - mdmonitor: set small delay once (jsc#SLE-13700) 0099-mdmonitor-set-small-delay-once.patch - Check if other Monitor instance running before fork. (jsc#SLE-13700) 0100-Check-if-other-Monitor-instance-running-before-fork.patch - Super1: allow RAID0 layout setting to be removed. (jsc#SLE-13700) 0101-Super1-allow-RAID0-layout-setting-to-be-removed.patch - Detail: fix segfault during IMSM raid creation (jsc#SLE-13700) 0102-Detail-fix-segfault-during-IMSM-raid-creation.patch - Create.c: close mdfd and generate uevent (jsc#SLE-13700) 0103-Create.c-close-mdfd-and-generate-uevent.patch - imsm: update num_data_stripes according to dev_size (jsc#SLE-13700) 0104-imsm-update-num_data_stripes-according-to-dev_size.patch - imsm: remove redundant calls to imsm_get_map (jsc#SLE-13700) OBS-URL: https://build.opensuse.org/request/show/853269 OBS-URL: https://build.opensuse.org/package/show/Base:System/mdadm?expand=0&rev=191
137 lines
4.7 KiB
Diff
137 lines
4.7 KiB
Diff
From 97b51a2c2d00b79a59f2a8e37134031b0c9e0223 Mon Sep 17 00:00:00 2001
|
|
From: NeilBrown <neilb@suse.de>
|
|
Date: Wed, 14 Oct 2020 13:12:48 +1100
|
|
Subject: [PATCH 07/17] Super1: allow RAID0 layout setting to be removed.
|
|
|
|
Once the RAID0 layout has been set, the RAID0 array cannot be assembled
|
|
on an older kernel which doesn't understand layouts.
|
|
This is an intentional safety feature, but sometimes people need the
|
|
ability to roll-back to a previously working configuration.
|
|
|
|
So add "--update=layout-unspecified" to remove RAID0 layout information
|
|
from the superblock.
|
|
Running "--assemble --update=layout-unspecified" will cause the assembly
|
|
the fail when run on a newer kernel, but will allow it to work on
|
|
an older kernel.
|
|
|
|
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
|
|
---
|
|
md.4 | 13 +++++++++++++
|
|
mdadm.8.in | 15 +++++++++++++--
|
|
mdadm.c | 5 +++--
|
|
super1.c | 6 +++++-
|
|
4 files changed, 34 insertions(+), 5 deletions(-)
|
|
|
|
diff --git a/md.4 b/md.4
|
|
index aecff38..60fdd27 100644
|
|
--- a/md.4
|
|
+++ b/md.4
|
|
@@ -215,6 +215,19 @@ option or the
|
|
.B "--update=layout-alternate"
|
|
option.
|
|
|
|
+Once you have updated the layout you will not be able to mount the array
|
|
+on an older kernel. If you need to revert to an older kernel, the
|
|
+layout information can be erased with the
|
|
+.B "--update=layout-unspecificed"
|
|
+option. If you use this option to
|
|
+.B --assemble
|
|
+while running a newer kernel, the array will NOT assemble, but the
|
|
+metadata will be update so that it can be assembled on an older kernel.
|
|
+
|
|
+No that setting the layout to "unspecified" removes protections against
|
|
+this bug, and you must be sure that the kernel you use matches the
|
|
+layout of the array.
|
|
+
|
|
.SS RAID1
|
|
|
|
A RAID1 array is also known as a mirrored set (though mirrors tend to
|
|
diff --git a/mdadm.8.in b/mdadm.8.in
|
|
index ab832e8..34a93a8 100644
|
|
--- a/mdadm.8.in
|
|
+++ b/mdadm.8.in
|
|
@@ -1213,6 +1213,7 @@ argument given to this flag can be one of
|
|
.BR no\-ppl ,
|
|
.BR layout\-original ,
|
|
.BR layout\-alternate ,
|
|
+.BR layout\-unspecified ,
|
|
.BR metadata ,
|
|
or
|
|
.BR super\-minor .
|
|
@@ -1368,8 +1369,9 @@ The
|
|
.B layout\-original
|
|
and
|
|
.B layout\-alternate
|
|
-options are for RAID0 arrays in use before Linux 5.4. If the array was being
|
|
-used with Linux 3.13 or earlier, then to assemble the array on a new kernel,
|
|
+options are for RAID0 arrays with non-uniform devices size that were in
|
|
+use before Linux 5.4. If the array was being used with Linux 3.13 or
|
|
+earlier, then to assemble the array on a new kernel,
|
|
.B \-\-update=layout\-original
|
|
must be given. If the array was created and used with a kernel from Linux 3.14 to
|
|
Linux 5.3, then
|
|
@@ -1379,6 +1381,15 @@ will happen normally.
|
|
For more information, see
|
|
.IR md (4).
|
|
|
|
+The
|
|
+.B layout\-unspecified
|
|
+option reverts the effect of
|
|
+.B layout\-orignal
|
|
+or
|
|
+.B layout\-alternate
|
|
+and allows the array to be again used on a kernel prior to Linux 5.3.
|
|
+This option should be used with great caution.
|
|
+
|
|
.TP
|
|
.BR \-\-freeze\-reshape
|
|
Option is intended to be used in start-up scripts during initrd boot phase.
|
|
diff --git a/mdadm.c b/mdadm.c
|
|
index 1b3467f..493d70e 100644
|
|
--- a/mdadm.c
|
|
+++ b/mdadm.c
|
|
@@ -796,7 +796,8 @@ int main(int argc, char *argv[])
|
|
if (strcmp(c.update, "revert-reshape") == 0)
|
|
continue;
|
|
if (strcmp(c.update, "layout-original") == 0 ||
|
|
- strcmp(c.update, "layout-alternate") == 0)
|
|
+ strcmp(c.update, "layout-alternate") == 0 ||
|
|
+ strcmp(c.update, "layout-unspecified") == 0)
|
|
continue;
|
|
if (strcmp(c.update, "byteorder") == 0) {
|
|
if (ss) {
|
|
@@ -828,7 +829,7 @@ int main(int argc, char *argv[])
|
|
" 'summaries', 'homehost', 'home-cluster', 'byteorder', 'devicesize',\n"
|
|
" 'no-bitmap', 'metadata', 'revert-reshape'\n"
|
|
" 'bbl', 'no-bbl', 'force-no-bbl', 'ppl', 'no-ppl'\n"
|
|
- " 'layout-original', 'layout-alternate'\n"
|
|
+ " 'layout-original', 'layout-alternate', 'layout-unspecified'\n"
|
|
);
|
|
exit(outf == stdout ? 0 : 2);
|
|
|
|
diff --git a/super1.c b/super1.c
|
|
index 7664883..8b0d6ff 100644
|
|
--- a/super1.c
|
|
+++ b/super1.c
|
|
@@ -1551,11 +1551,15 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
|
|
else if (strcmp(update, "nofailfast") == 0)
|
|
sb->devflags &= ~FailFast1;
|
|
else if (strcmp(update, "layout-original") == 0 ||
|
|
- strcmp(update, "layout-alternate") == 0) {
|
|
+ strcmp(update, "layout-alternate") == 0 ||
|
|
+ strcmp(update, "layout-unspecified") == 0) {
|
|
if (__le32_to_cpu(sb->level) != 0) {
|
|
pr_err("%s: %s only supported for RAID0\n",
|
|
devname?:"", update);
|
|
rv = -1;
|
|
+ } else if (strcmp(update, "layout-unspecified") == 0) {
|
|
+ sb->feature_map &= ~__cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
|
|
+ sb->layout = 0;
|
|
} else {
|
|
sb->feature_map |= __cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
|
|
sb->layout = __cpu_to_le32(update[7] == 'o' ? 1 : 2);
|
|
--
|
|
2.26.2
|
|
|