Accepting request 1007257 from home:NMoreyChaisemartin:branches:science:HPC
- Update to v4.21.0-1 (jsc#PED-911, jsc#PED-1188)
- Generic
- Added support for NVIDIA ConnectX-7 adapter cards.
- Added additional Flash support for ConnectX-4 Lx and ConnectX-5 adapter cards.
- Python 2.x - Python 2.x is now end-of-life and no longer supported by MFT.
- mstfwreset
- For some configuration changes done using mstconfig, PCI rescan by the user is required.
- Added a new reset-type ("NIC only reset") to mstfwreset which is applicable only
to SmartNIC devices. The new reset-type is also the new default for SmartNIC devices.
In case of reset-type is set to "NIC only reset", mstfwreset will not reset the internal host.
- mstflint
- Querying Vendor Specific Firmware Information from an Nvidia AOC / Transceiver Querying
a firmware cable transceiver is now done using the "mstflint" tool.
- cable/transceivers burning commands provide now validation and extract version from the image files.
- Modified the output of the PCIe link information, removed the device status filed.
- When downgrading to a firmware version that does not support the flash type of
the device, mstflint will present the user a clear error of such scenario.
- mlxconfig
- Enable the users to apply token via MTUSB connected device.
- mstresourceparse
- mstresourceparse will present the union fields according to the selector.
Unions that do not have a selector, will be presented with all the fields as before.
- mstresourcedump
- mstresourcedump tool now runs ~10X faster in mem mode with output to binary file.
- Updated the "--virtual-hca-id" value output to be in a hexadecimal format.
- Memory-Mode, data field is now transferred via memory instead of the resource-dump register.
- mstlink
- Removed irrelevant "eye" info fields in the output of the "show eye" command for PCIe links.
- Removed the device status field from the PCIe info section.
- Added support for "show_eye" command for ConnectX-7 over PCIe links.
- Re-formatted the serdes Tx parameter layout in the "show_sedes_tx" command.
- Added support for the PRBS test mode of Active/Optical CMIS modules.
- Added support for additional configuration flags of the module control parameters.
- Added support for new PRBS TX/RX patterns (--tx_prbs <tx_prbs_mode> & --rx_prbs <rx_prbs_mode>).
- Added new show counters for 16nm devices. To see them run the "show_counter" command.
- Extended the list of the cable information received for 16nm devices when running the "show_module" command.
- Extended the information collection for 7nm and 16nm devices. See "--amber_collect" flag.
- Extended the list of the cable information (LOL, LOS, FSM, and module status)
for CMIS when running the "show_module" command.
- mstdump
- Added an optional parameter of the CSV path (-c | --csv)
which loads the provides the CSV from a fixed location as a DB instead of the default one.
- mstprivhost
- Added a new flag to query all hosts status from the embedded Arm side for Multi-host systems.
- Refresh patches against latest sources:
- Remove-date-time-info-from-build.patch
- Fix-gcc7-and-gcc8.patch
OBS-URL: https://build.opensuse.org/request/show/1007257
OBS-URL: https://build.opensuse.org/package/show/science:HPC/mstflint?expand=0&rev=45
2022-09-30 15:09:56 +02:00
|
|
|
commit 6a8758e9353447abdb9366638790984e84b04eb1
|
2018-06-25 08:25:36 +02:00
|
|
|
Author: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com>
|
|
|
|
|
Date: Wed Aug 9 17:31:57 2017 +0200
|
|
|
|
|
|
|
|
|
|
Fix gcc7 and gcc8
|
|
|
|
|
|
|
|
|
|
Fix compilation errors for GCC7 and GCC8
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com>
|
|
|
|
|
|
|
|
|
|
diff --git configure.ac configure.ac
|
Accepting request 1007257 from home:NMoreyChaisemartin:branches:science:HPC
- Update to v4.21.0-1 (jsc#PED-911, jsc#PED-1188)
- Generic
- Added support for NVIDIA ConnectX-7 adapter cards.
- Added additional Flash support for ConnectX-4 Lx and ConnectX-5 adapter cards.
- Python 2.x - Python 2.x is now end-of-life and no longer supported by MFT.
- mstfwreset
- For some configuration changes done using mstconfig, PCI rescan by the user is required.
- Added a new reset-type ("NIC only reset") to mstfwreset which is applicable only
to SmartNIC devices. The new reset-type is also the new default for SmartNIC devices.
In case of reset-type is set to "NIC only reset", mstfwreset will not reset the internal host.
- mstflint
- Querying Vendor Specific Firmware Information from an Nvidia AOC / Transceiver Querying
a firmware cable transceiver is now done using the "mstflint" tool.
- cable/transceivers burning commands provide now validation and extract version from the image files.
- Modified the output of the PCIe link information, removed the device status filed.
- When downgrading to a firmware version that does not support the flash type of
the device, mstflint will present the user a clear error of such scenario.
- mlxconfig
- Enable the users to apply token via MTUSB connected device.
- mstresourceparse
- mstresourceparse will present the union fields according to the selector.
Unions that do not have a selector, will be presented with all the fields as before.
- mstresourcedump
- mstresourcedump tool now runs ~10X faster in mem mode with output to binary file.
- Updated the "--virtual-hca-id" value output to be in a hexadecimal format.
- Memory-Mode, data field is now transferred via memory instead of the resource-dump register.
- mstlink
- Removed irrelevant "eye" info fields in the output of the "show eye" command for PCIe links.
- Removed the device status field from the PCIe info section.
- Added support for "show_eye" command for ConnectX-7 over PCIe links.
- Re-formatted the serdes Tx parameter layout in the "show_sedes_tx" command.
- Added support for the PRBS test mode of Active/Optical CMIS modules.
- Added support for additional configuration flags of the module control parameters.
- Added support for new PRBS TX/RX patterns (--tx_prbs <tx_prbs_mode> & --rx_prbs <rx_prbs_mode>).
- Added new show counters for 16nm devices. To see them run the "show_counter" command.
- Extended the list of the cable information received for 16nm devices when running the "show_module" command.
- Extended the information collection for 7nm and 16nm devices. See "--amber_collect" flag.
- Extended the list of the cable information (LOL, LOS, FSM, and module status)
for CMIS when running the "show_module" command.
- mstdump
- Added an optional parameter of the CSV path (-c | --csv)
which loads the provides the CSV from a fixed location as a DB instead of the default one.
- mstprivhost
- Added a new flag to query all hosts status from the embedded Arm side for Multi-host systems.
- Refresh patches against latest sources:
- Remove-date-time-info-from-build.patch
- Fix-gcc7-and-gcc8.patch
OBS-URL: https://build.opensuse.org/request/show/1007257
OBS-URL: https://build.opensuse.org/package/show/science:HPC/mstflint?expand=0&rev=45
2022-09-30 15:09:56 +02:00
|
|
|
index 4d549ee4cb79..c8e15447f5e1 100644
|
2018-06-25 08:25:36 +02:00
|
|
|
--- configure.ac
|
|
|
|
|
+++ configure.ac
|
Accepting request 1007257 from home:NMoreyChaisemartin:branches:science:HPC
- Update to v4.21.0-1 (jsc#PED-911, jsc#PED-1188)
- Generic
- Added support for NVIDIA ConnectX-7 adapter cards.
- Added additional Flash support for ConnectX-4 Lx and ConnectX-5 adapter cards.
- Python 2.x - Python 2.x is now end-of-life and no longer supported by MFT.
- mstfwreset
- For some configuration changes done using mstconfig, PCI rescan by the user is required.
- Added a new reset-type ("NIC only reset") to mstfwreset which is applicable only
to SmartNIC devices. The new reset-type is also the new default for SmartNIC devices.
In case of reset-type is set to "NIC only reset", mstfwreset will not reset the internal host.
- mstflint
- Querying Vendor Specific Firmware Information from an Nvidia AOC / Transceiver Querying
a firmware cable transceiver is now done using the "mstflint" tool.
- cable/transceivers burning commands provide now validation and extract version from the image files.
- Modified the output of the PCIe link information, removed the device status filed.
- When downgrading to a firmware version that does not support the flash type of
the device, mstflint will present the user a clear error of such scenario.
- mlxconfig
- Enable the users to apply token via MTUSB connected device.
- mstresourceparse
- mstresourceparse will present the union fields according to the selector.
Unions that do not have a selector, will be presented with all the fields as before.
- mstresourcedump
- mstresourcedump tool now runs ~10X faster in mem mode with output to binary file.
- Updated the "--virtual-hca-id" value output to be in a hexadecimal format.
- Memory-Mode, data field is now transferred via memory instead of the resource-dump register.
- mstlink
- Removed irrelevant "eye" info fields in the output of the "show eye" command for PCIe links.
- Removed the device status field from the PCIe info section.
- Added support for "show_eye" command for ConnectX-7 over PCIe links.
- Re-formatted the serdes Tx parameter layout in the "show_sedes_tx" command.
- Added support for the PRBS test mode of Active/Optical CMIS modules.
- Added support for additional configuration flags of the module control parameters.
- Added support for new PRBS TX/RX patterns (--tx_prbs <tx_prbs_mode> & --rx_prbs <rx_prbs_mode>).
- Added new show counters for 16nm devices. To see them run the "show_counter" command.
- Extended the list of the cable information received for 16nm devices when running the "show_module" command.
- Extended the information collection for 7nm and 16nm devices. See "--amber_collect" flag.
- Extended the list of the cable information (LOL, LOS, FSM, and module status)
for CMIS when running the "show_module" command.
- mstdump
- Added an optional parameter of the CSV path (-c | --csv)
which loads the provides the CSV from a fixed location as a DB instead of the default one.
- mstprivhost
- Added a new flag to query all hosts status from the embedded Arm side for Multi-host systems.
- Refresh patches against latest sources:
- Remove-date-time-info-from-build.patch
- Fix-gcc7-and-gcc8.patch
OBS-URL: https://build.opensuse.org/request/show/1007257
OBS-URL: https://build.opensuse.org/package/show/science:HPC/mstflint?expand=0&rev=45
2022-09-30 15:09:56 +02:00
|
|
|
@@ -308,6 +308,7 @@ AM_CONDITIONAL([USE_LOCAL_SQLITE], [test "$SQLITE_SYSTEM_AVAILABLE" = no])
|
|
|
|
|
|
2018-06-25 08:25:36 +02:00
|
|
|
|
2019-02-14 07:54:30 +01:00
|
|
|
CFLAGS="$CFLAGS -DMST_UL"
|
2018-06-25 08:25:36 +02:00
|
|
|
+CPPFLAGS="$CPPFLAGS -DMST_UL"
|
2019-02-14 07:54:30 +01:00
|
|
|
CXXFLAGS="$CXXFLAGS -DMST_UL"
|
2018-06-25 08:25:36 +02:00
|
|
|
|
Accepting request 1007257 from home:NMoreyChaisemartin:branches:science:HPC
- Update to v4.21.0-1 (jsc#PED-911, jsc#PED-1188)
- Generic
- Added support for NVIDIA ConnectX-7 adapter cards.
- Added additional Flash support for ConnectX-4 Lx and ConnectX-5 adapter cards.
- Python 2.x - Python 2.x is now end-of-life and no longer supported by MFT.
- mstfwreset
- For some configuration changes done using mstconfig, PCI rescan by the user is required.
- Added a new reset-type ("NIC only reset") to mstfwreset which is applicable only
to SmartNIC devices. The new reset-type is also the new default for SmartNIC devices.
In case of reset-type is set to "NIC only reset", mstfwreset will not reset the internal host.
- mstflint
- Querying Vendor Specific Firmware Information from an Nvidia AOC / Transceiver Querying
a firmware cable transceiver is now done using the "mstflint" tool.
- cable/transceivers burning commands provide now validation and extract version from the image files.
- Modified the output of the PCIe link information, removed the device status filed.
- When downgrading to a firmware version that does not support the flash type of
the device, mstflint will present the user a clear error of such scenario.
- mlxconfig
- Enable the users to apply token via MTUSB connected device.
- mstresourceparse
- mstresourceparse will present the union fields according to the selector.
Unions that do not have a selector, will be presented with all the fields as before.
- mstresourcedump
- mstresourcedump tool now runs ~10X faster in mem mode with output to binary file.
- Updated the "--virtual-hca-id" value output to be in a hexadecimal format.
- Memory-Mode, data field is now transferred via memory instead of the resource-dump register.
- mstlink
- Removed irrelevant "eye" info fields in the output of the "show eye" command for PCIe links.
- Removed the device status field from the PCIe info section.
- Added support for "show_eye" command for ConnectX-7 over PCIe links.
- Re-formatted the serdes Tx parameter layout in the "show_sedes_tx" command.
- Added support for the PRBS test mode of Active/Optical CMIS modules.
- Added support for additional configuration flags of the module control parameters.
- Added support for new PRBS TX/RX patterns (--tx_prbs <tx_prbs_mode> & --rx_prbs <rx_prbs_mode>).
- Added new show counters for 16nm devices. To see them run the "show_counter" command.
- Extended the list of the cable information received for 16nm devices when running the "show_module" command.
- Extended the information collection for 7nm and 16nm devices. See "--amber_collect" flag.
- Extended the list of the cable information (LOL, LOS, FSM, and module status)
for CMIS when running the "show_module" command.
- mstdump
- Added an optional parameter of the CSV path (-c | --csv)
which loads the provides the CSV from a fixed location as a DB instead of the default one.
- mstprivhost
- Added a new flag to query all hosts status from the embedded Arm side for Multi-host systems.
- Refresh patches against latest sources:
- Remove-date-time-info-from-build.patch
- Fix-gcc7-and-gcc8.patch
OBS-URL: https://build.opensuse.org/request/show/1007257
OBS-URL: https://build.opensuse.org/package/show/science:HPC/mstflint?expand=0&rev=45
2022-09-30 15:09:56 +02:00
|
|
|
|
|
|
|
|
@@ -336,6 +337,14 @@ AX_CHECK_COMPILE_FLAG([-Wno-implicit-fallthrough], [CFLAGS="$CFLAGS -Wno-implici
|
2021-04-09 09:36:52 +02:00
|
|
|
AX_CHECK_COMPILE_FLAG([-Wno-cast-function-type], [CFLAGS="$CFLAGS -Wno-cast-function-type"], [], [])
|
|
|
|
|
CFLAGS="$OLD_CFLAGS"
|
|
|
|
|
|
|
|
|
|
+# C GCC [78] related ignores
|
|
|
|
|
+OLD_CPPFLAGS="$CPPFLAGS"
|
|
|
|
|
+CPPFLAGS="$CPPFLAGS -Wall -Werror"
|
|
|
|
|
+AX_CHECK_COMPILE_FLAG([-Wno-format-overflow], [CPPFLAGS="$CPPFLAGS -Wno-format-overflow"], [], [])
|
|
|
|
|
+AX_CHECK_COMPILE_FLAG([-Wno-implicit-fallthrough], [CPPFLAGS="$CPPFLAGS -Wno-implicit-fallthrough"], [], [])
|
|
|
|
|
+AX_CHECK_COMPILE_FLAG([-Wno-cast-function-type], [CPPFLAGS="$CPPFLAGS -Wno-cast-function-type"], [], [])
|
|
|
|
|
+CPPFLAGS="$OLD_CPPFLAGS"
|
|
|
|
|
+
|
|
|
|
|
# C++ related ignores
|
|
|
|
|
OLD_CXXFLAGS="$CXXFLAGS"
|
|
|
|
|
CXXFLAGS="$CXXFLAGS -Wall -Werror"
|