pool/multipath-tools
SHA256
4
0
Fork 1
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
multipath-tools/multipath-tools.changes
Martin Wilck 8b4153f24d - Update to version 0.11.0+164+suse.24eeee7 
- Reviewed Upstream changes from 0.12 development
  * Continued rework of the path checker loop
  * multipathd now sets the port_state of Fibre Channel remote ports to
    "marginal" for NVMe devices, too (with nvme_core.multipath=N only).
  * Make sure maps are reloaded in the path checker loop after detecting an
    inconsistent or wrong kernel state (bsc#1236392)
  * Make sure udev and systemd notice changes in multipath path state
    when devices are added to or removed from multipath maps (bsc#1236321)
  * Fix path grouping if a path device is added while offline with group_by_tpg
    and group_by_serial path grouping policy
    (gh#opensvc/multipath-tools#108, bsc#1236392)
  * Fix the problem that `group_by_tpg` might be disabled if one or more
    paths were offline during initial configuration (bsc#1236392)
  * Fix multipathd crash because of invalid path group index value, for example
    if an invalid path device was removed from a map.
    (gh#opensvc/multipath-tools#105, bsc#1236392)
- Changes in Upstream 0.11.0 (see also NEWS.md)
  * multipathd: set rport port_state to marginal for NVMe devices
  * Fixed a memory leak in the nvme foreign library.
  * Fixed a problem in the marginal path detection algorithm that could cause
    the io error check for a recently failed path to be delayed.
    (bsc#1236390)
  * multipath-tools: add HPE MSA Gen7 (2070/2072) to hwtable
  * multipath-tools: add SCST to hwtable
  * Add defaults for SCST and HPE MSA Gen7 to hwtable
  * Reduce log level of harmless "map ... doesn't exist" message
    (bsc#1236390)
  * Fixes for handling empty or incompletely created multipath maps
    (bsc#1236390)

OBS-URL: https://build.opensuse.org/package/show/Base:System/multipath-tools?expand=0&rev=351
2025-01-24 15:11:43 +00:00

3671 lines
146 KiB
Plaintext
Raw Permalink Blame History

-------------------------------------------------------------------
Fri Jan 24 15:06:55 UTC 2025 - Martin Wilck <mwilck@suse.com>
- Update to version 0.11.0+164+suse.24eeee7
- Reviewed Upstream changes from 0.12 development
* Continued rework of the path checker loop
* multipathd now sets the port_state of Fibre Channel remote ports to
"marginal" for NVMe devices, too (with nvme_core.multipath=N only).
* Make sure maps are reloaded in the path checker loop after detecting an
inconsistent or wrong kernel state (bsc#1236392)
* Make sure udev and systemd notice changes in multipath path state
when devices are added to or removed from multipath maps (bsc#1236321)
* Fix path grouping if a path device is added while offline with group_by_tpg
and group_by_serial path grouping policy
(gh#opensvc/multipath-tools#108, bsc#1236392)
* Fix the problem that `group_by_tpg` might be disabled if one or more
paths were offline during initial configuration (bsc#1236392)
* Fix multipathd crash because of invalid path group index value, for example
if an invalid path device was removed from a map.
(gh#opensvc/multipath-tools#105, bsc#1236392)
- Changes in Upstream 0.11.0 (see also NEWS.md)
* multipathd: set rport port_state to marginal for NVMe devices
* Fixed a memory leak in the nvme foreign library.
* Fixed a problem in the marginal path detection algorithm that could cause
the io error check for a recently failed path to be delayed.
(bsc#1236390)
* multipath-tools: add HPE MSA Gen7 (2070/2072) to hwtable
* multipath-tools: add SCST to hwtable
* Add defaults for SCST and HPE MSA Gen7 to hwtable
* Reduce log level of harmless "map ... doesn't exist" message
(bsc#1236390)
* Fixes for handling empty or incompletely created multipath maps
(bsc#1236390)
* During map creation, fixed the case where a map with different name, but
matching UUID and matching type was already present. multipathd
previously failed to set up such maps. Now it will reload them with the
correct content. (bsc#1236390)
-------------------------------------------------------------------
Wed Jan 22 16:18:10 UTC 2025 - Dominique Leuenberger <dimstar@opensuse.org>
- Drop rcFOO symlinks for CODE16 (PED-266).
-------------------------------------------------------------------
Thu Nov 21 20:13:36 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.11.0~1+118+suse.4a51b1a
See NEWS.md for details about upstream changes in 0.11.0.
* Pre-release of upstream 0.11.0
* Rework of the path checking algorithm to reduce wait time and improve
performance
* Modified the systemd unit `multipathd.service` such that multipathd will now
restart after a failure or crash (gh#opensvc/multipath-tools#100)
* multipathd: move systemd watchdog handling into daemon (bsc#1232227)
* libmultipath: dm_get_maps(): don't bail out for single-map failures
(bsc#1233588, gh#opensvc/multipath-tools#102)
* libmultipath: don't set dev_loss_tmo to 0 for NO_PATH_RETRY_FAIL
* multipathd: fix deferred_failback_tick for reload removes
-------------------------------------------------------------------
Tue Nov 5 09:29:27 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.10.0+108+suse.2c2e597:
* Update fix for bsc#1232063 to upstream-accepted solution
-------------------------------------------------------------------
Mon Nov 4 11:13:17 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.10.0+106+suse.ffbdb7a:
* Fix reboot hang if uevent is processed for suspended device
(bsc#1232063)
-------------------------------------------------------------------
Thu Aug 29 07:00:18 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to 0.10.0+103+suse.0fc97cd
- Update to upstream 0.10.0 (see also NEWS.md)
* The `multipathd show daemon` command now shows `(reconfigure pending)`
if a reconfiguration has been triggered but not finished yet.
* Refactored the path checker loop. Paths are now checked for each multipath
map in turn
* Renamed public functions, variables, and macros to comply with the glibc policy
for reserved names (gh#opensvc/multipath-tools#91)
* Fixed bug that caused queueing to be always disabled if flushing a map failed
(bug introduced in 0.9.8). (bsc#1229898)
* Fixed failure to remove maps even with `deferred_remove` (bug introduced in
0.9.9). (bsc#1229898)
* Fixed old mpathpersist bug leading to the error message "configured reservation
key doesn't match: 0x0" when `reservation_key` was configured in the
multipaths section of `multipath.conf`. (bsc#1228926, gh#opensvc/multipath-tools#92)
* Fixed output of `multipath -t` and `multipath -T` for the options
`force_sync` and `retrigger_tries`. (bsc#1229898, gh#opensvc/multipath-tools#88)
* Fixed adding maps by WWID in CLI (command `add map $WWID`). (bsc#1229898)
-------------------------------------------------------------------
Fri Jul 19 16:01:19 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.9+161+suse.0c835ef:
* Update to upstream reviewed code path (787e00d)
* Added hardware defaults for Huawei storage arrays and XSG1 vendors
* Refactored and improved the libultipath / libdevmapper interface
* Fixed bug that caused queueing to be always disabled if flushing a map failed
(bug introduced in 0.9.8). (bsc#1229898)
* Fixed failure to remove maps even with `deferred_remove`
(bug introduced in 0.9.9). (bsc#1229898)
* CI improvements
* Documentation fixes
-------------------------------------------------------------------
Tue Jun 25 13:19:58 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.9+90+suse.f1d2f20:
* Fix unit tests on Tumbleweed/armv7l
- Update to 0.9.9 upstream (see NEWS.md for details)
* Update udev rules to be compliant with device-mapper udev
rules update in LVM2 >= 2.03.24.
* Limit real-time scheduling priority to 10 by default. This
can now be configured in multipathd.service using "LimitRTPRIO="
* Set max_sectors_kb only on map creation, or when a new path
is added, to avoid IO errors
* The configuration option "flush_on_last_del" now takes the
values "always" (="yes"), "unused" (="no"), and "never". "yes"
and "no" are still supported
* Add wildcard %k for max_sectors_kb for CLI commands like
"multipath show {paths,maps} format"
* Accept WWID value in CLI commands that take a map name, like
"resize map $map"
* Removed support for CLI wildcards for pathgroups, which were
not function anyway.
* Fix map failure count for no_path_retry > 0
-------------------------------------------------------------------
Thu Apr 11 15:22:02 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.8+88+suse.d504d83:
* Revert "libmultipath: fix max_sectors_kb on adding path"
(bsc#1222458)
-------------------------------------------------------------------
Tue Mar 5 20:19:12 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.8+87+suse.f72b9f3:
* fix misspelled DM_UDEV_DISABLE_OTHER_RULES_FLAG in udev rules
(bsc#1220810)
-------------------------------------------------------------------
Tue Feb 27 10:12:35 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Remove libmpathpersist-example-old.c, which has been obsolete
since multipath-tools 0.8.6.
-------------------------------------------------------------------
Mon Feb 26 11:57:03 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.8+83+suse.bcae610 (bsc#1220374)
* multipath-tools: added NEWS.md
-------------------------------------------------------------------
Thu Feb 15 11:00:59 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.8~1+82+suse.dcd98a3:
* Adapt package version such that it shows as a 0.9.8 prerelease
* Add missing udev rules file
-------------------------------------------------------------------
Wed Feb 14 20:52:13 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.7+148+suse.9780ae0:
* 11-dm-mpath.rules: Fix quoting mistake (bsc#1219142)
-------------------------------------------------------------------
Mon Feb 12 15:33:58 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.7+148+suse.7d9953e.obscpio
* This is a multipath-tools 0.9.8 pre-release
* fix fast_io_fail for Infinibox (bsc#1219348)
* Fix activation of LVM volume groups during coldplug (bsc#1219142)
-------------------------------------------------------------------
Mon Feb 12 15:09:47 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.7+140+suse.2d78457:
* This is a multipath-tools 0.9.8 pre-release
* Socket activation via multipathd.socket has been disabled by default
because it has undesirable side effects on systems without multipath.
Users with multipath hardware should enable multipathd.service
* The restorequeueing CLI command now only enables queueing if
disablequeueing had been sent before
* Avoid multipathd hang during map flush
* multipathd now tracks the queueing mode of maps in its internal features string
* Improve error messages in 'multipathd -k'
* Fix segfault in autoresize code (bsc#1219289)
* Fix missing map reloads (bsc#1219796)
* Documentation fixes, spelling fixes, minor code fixes
-------------------------------------------------------------------
Fri Jan 5 14:32:11 UTC 2024 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.7+93+suse.e2f2272:
* fix ANA prioritizer enablement logic (bsc#1218326)
* avoid setting queue_if_no_path on multipath maps for which the
no_path_retry timeout has expired
* the interactive commands "restorequeueing map X" and
"restorequeing maps" now only affect maps that had queueing
manually disabled using "disablequeuing maps" or
"disablequeuing map X" beforehand
* Spelling fixes
-------------------------------------------------------------------
Tue Nov 21 20:46:40 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.7+76+suse.5f857af:
* Update to upstream 0.9.7 (jsc#PED-6464)
* added max_retries config option to limit SCSI retries
* added auto_resize config option to enable resizing multipath maps automatically
* fixed memory and error handling for code using aio (marginal path code,
directio path checker)
* dropped modules-load.d/multipath.conf; replaced by a dependency on
modprobe@dm-multipath.service (systemd >= 245: SLE15-SP3 and later only)
and a softdep on sd_mod for the SCSI device handlers
(bsc#1217377)
* On SLE/Leap suse-module-tools doesn't ship a scsi_mod->sd_mod softdep yet.
Add it here, too. It will be overridden by s-m-t when it's added there.
* drop usr_prefix= setting in SLE build recipes (set to /usr by upstream
automatically)
-------------------------------------------------------------------
Wed Oct 25 10:46:30 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.6+115+suse.07776fb
* multipathd: Added support to handle FPIN-Li events for FC-NVMe
-------------------------------------------------------------------
Fri Sep 15 12:36:30 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.6+110+suse.5dfdf35:
* The options "bindings_file", "prkeys_file", and "wwids_file",
which have been deprecated since multipath-tools 0.8.8,
aren't supported any more. The paths to these files are now
hard-coded to "bindings", "prkeys" and "wwids" under
/etc/multipath.
* Strictly avoid assigning map aliases that are already taken
(bsc#1213265)
* Improve handling of user-friendly names
* avoid "multipath -d" (dry-run) changing SCSI timeouts in sysfs
(bsc#1213809)
- spec file:
* adapt prefix values to upstream changes
* fix compilation flags for "make check"
* pass EXTRAVERSION to build
-------------------------------------------------------------------
Tue Sep 12 06:48:40 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Configuration directory should be /etc/multipath/conf.d
(broken since 0.9.4+68+suse.98559ea)
-------------------------------------------------------------------
Thu Sep 7 06:58:57 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.6+71+suse.f07325e:
* avoid changing SCSI timeouts in "multipath -d" (bsc#1213809)
-------------------------------------------------------------------
Wed Sep 6 13:51:42 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.6+70+suse.63925e8:
Upstream feature additions and bug fixes:
* ignore nvme devices by default if nvme native multipath is enabled
(bsc#1212854)
* add "group_by_tpg" path_grouping_policy
* add config options "detect_pgpolicy" and "detect_pgpolicy_use_tpg"
* libmultipath: add ALUA tpg path wildcard "%A"
* make prioritizer timeouts consistent with checker timeouts
* fix dev_loss_tmo even if not set in configuration (bsc#1212440)
* libmultipath: fix max_sectors_kb on adding path
* fix warnings reported by udevadm verify
-------------------------------------------------------------------
Fri May 12 13:54:09 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.5+68+suse.d1b6a1c:
Upstream bugfixes:
* libmultipath: use directio checker for LIO targets
(gh#opensvc/multipath-tools#54)
* multipathd.service: remove "Also=multipathd.socket"
(gh#opensvc/multipath-tools#65)
* libmultipathd: Avoid parsing errors due to unsupported designators
-------------------------------------------------------------------
Wed Mar 22 16:06:50 UTC 2023 - Martin Wilck <mwilck@suse.com>
* libmultipath: avoid grouping paths wrongly with "find_multipaths smart"
(bsc#1209623)
-------------------------------------------------------------------
Wed Mar 15 17:07:57 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.4+79+suse.25c23a9:
* fix multipath-tools build with liburcu 0.14.0
- Upstream bug fixes:
* libmultipath: return 'pending' state when port is in transition
* multipath.rules: fix "smart" bug with failed valid path check
* libmpathpersist: fix resource leak in update_map_pr()
* libmultipath: keep renames from stopping other multipath actions
-------------------------------------------------------------------
Wed Jan 25 15:04:40 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.4+68+suse.98559ea:
* libmultipath: bump ABI version to 18.0.0
* libmultipath: pathinfo: don't fail for devices lacking INQUIRY properties
(gh#opensvc/multipath-tools#56)
* libmpathpersist: use conf->timeout for updating persistent reservations
(gh#opensvc/multipath-tools#45)
* libmultipath: is_path_valid(): check if device is in use
(bsc#1203141) (added libmount dependency)
* libmultipath: orphan paths if coalesce_paths frees newmp (bsc#1207546)
* multipathd: handle no active paths in update_map_pr (bsc#1207546)
* multipathd: make pr registration consistent (bsc#1207546)
* libmultipath: don't leak memory on invalid strings (bsc#1207546)
* multipath.conf(5): improve documentation of dev_loss_tmo (bsc#1207546)
* libmpathpersist: fix command keyword ordering (bsc#1207546, bsc#1209345)
* libmultipath: fix 'show paths format' failure
* minor bugfixes
* hwtable fixes
* Build system rework
* spec file: adapt make command line to changes in build system
* spec file: use make -Orecurse (better readable output)
* spec file: use verbose build
-------------------------------------------------------------------
Wed Jan 18 09:27:06 UTC 2023 - Martin Wilck <mwilck@suse.com>
- Fix "rpm --verify" (bsc#1207232)
-------------------------------------------------------------------
Wed Oct 26 06:50:35 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.2+59+suse.ac8942d:
* Fix segfault in "multipath -t" command (boo#1204731)
-------------------------------------------------------------------
Mon Oct 24 08:22:20 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.2+57+suse.cf3c1e9:
* Fix multipathd authorization bypass and symlink attack
(bsc#1202739 CVE-2022-41973 CVE-2022-41974)
* add multipath-dracut.conf: dracut config file to install
tmpfiles.d/multipath.conf in initramfs
* Use "queue_mode bio" for NVMeoF/TCP devices
* Upstream bug fixes and hwtable updates
- Drop recompress.service, it just slows down build
-------------------------------------------------------------------
Fri Sep 9 19:38:03 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.1+52+suse.be8809e:
* Code-identical to 0.9.1+48+suse.9c6c435 (merge in git repo
to preserve history; fix revision in _service file).
-------------------------------------------------------------------
Wed Sep 7 13:52:36 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.1+48+suse.9c6c435:
* Upstream version update
* kpartx_id: remove bashism
* Doc: add multipathc.8 manual page
-------------------------------------------------------------------
Sat Sep 3 11:30:11 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.0+134+suse.dbf2e2d:
* Add multipathc command under GPL3.0, and split off libmpathutil
(bsc#1202616)
* Fix command completion in interactive mode (bsc#1201483)
* multipathd: fix use-after-free in handle_path_wwid_change()
(bsc#1201483)
* Improve startup time for very large multipath.conf (bsc#1200523)
* Avoid checker blocking event handling for huge number of devices
(boo#1203085)
* Cleanup sysfs accessors in libmultipath
* Minor upstream bug fixes
* Spelling fixes
* Documentation: add ALUA info to README.md, delete README.alua
-------------------------------------------------------------------
Wed Aug 24 09:28:55 UTC 2022 - mwilck@suse.com
- Update to version 0.9.0+55+suse.33d8854:
* Avoid linking to libreadline to avoid licensing issue
(bsc#1202616)
-------------------------------------------------------------------
Wed Jul 13 20:20:50 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.0+39+suse.51a2ab1:
Upstream bug fixes:
* libmultipath: fix find_multipaths_timeout for unknown hardware
(boo#1201483)
* multipath-tools: fix "multipath -ll" for Native NVME Multipath devices
(boo#1201483)
-------------------------------------------------------------------
Wed Jul 13 20:11:15 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.9.0+33+suse.fdc6686
* multipath.conf: add support for "protocol" subsection in
"overrides" section to set certain config options by protocol.
* Removed the previously deprecated options getuid_callout,
config_dir, multipath_dir, pg_timeout
* hwable fixes and additions
* multipath.conf(5): add disclaimer about vendor support
* libmultipath, kpartx: fix callers of dm_get_next_target()
* Change built-in defaults for NVMe: group by prio, and immediate
failback
* Allow compilation with -D_FORTIFY_SOURCE=3
-------------------------------------------------------------------
Wed May 11 12:54:27 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.9+90+suse.71a70fb:
* support overriding -D_FORTIFY_SOURCE in OPTFLAGS
* add -U_FORTIFY_SOURCE to optflags to avoid compilation errors
on old distros
-------------------------------------------------------------------
Tue May 10 07:37:57 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.9+87+suse.a1eb122:
* add ability to autodetect support for -D_FORTIFY_SOURCE=3
-------------------------------------------------------------------
Mon May 9 09:59:53 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.9+85+suse.a9da21c:
* This is a pre-release of multipath-tools 0.9.0
* multipath.conf: add "protocol" subsection in "overrides" section
This allows to set "dev_loss_tmo", "fast_io_fail_tmo", and
"eh_deadline" on a per-protocol basis rather than per storage
* multipath.conf: drop support for deprecated options:
getuid_callout, pg_timeout, config_dir, multipath_dir
* multipathd: don't switch to DAEMON_IDLE during startup
(bsc#1199346, bsc#1197570)
* multipathd: avoid delays during uevent processing (bsc#1199347)
* Fixes for minor issues reported by coverity
* Fix for memory leak with uid_attrs
* Fix possibility to redefine -D_FORTIFY_SOURCE macro.
* Updates for built in hardware db
-------------------------------------------------------------------
Thu Apr 14 21:13:18 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.9+42+suse.45974f11:
* Logging improvements
* Fix busy loop with delayed_reconfigure (bsc#1199342)
* multipathd: use remove_map_callback for delayed reconfigure
* multipathd: Don't keep starting TUR threads, if they always hang.
(bsc#1199345)
* Fix handling of path addition in read-only arrays on NVMe
* Updates of built-in hardware database
- Update to upstream 0.8.9
* libmultipath: only warn once about unsupported dev_loss_tmo
* Otherwise code-identical to 0.8.8+64
-------------------------------------------------------------------
Mon Mar 28 12:54:15 UTC 2022 - Martin Wilck <mwilck@suse.com>
- If multipath-tools is newly installed, load dm-multipath
(bsc#1196898)
-------------------------------------------------------------------
Wed Feb 16 13:24:47 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.8+64+suse.f265f7e0:
* libmultipath: fix printing native nvme multipath topology
(bsc#1196011)
* libmultipath: add %L path wildcard for 64-bit hex LUN
* libmultipath: support host adapter name lookup for s390x ccw bus
-------------------------------------------------------------------
Tue Feb 15 16:35:10 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.8+60+suse.4c5922cb:
* multipathd: add suppport for FC Fabric Performance Impact
Notifications (FPIN) (bsc#1195506)
-------------------------------------------------------------------
Wed Feb 9 10:01:45 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Version 0.8.8+57+suse.dfb672fe
* kpartx.rules: skip MD devices (bsc#1195644)
* libmultipath: hwtable: use ALUA for all LIO targets (bsc#1195649)
* multipathd.service: drop ExecStartPre for loading dm-multipath
(bsc#1195397)
-------------------------------------------------------------------
Wed Feb 2 09:56:59 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Version 0.8.8+45+suse.628d603e
* fix handling of historical-service-time path selector (bsc#1195425)
* fix marking multipath devices as failed prematurely on startup
(bsc#1195426)
* multipathd.service: remove LimitCORE=infinity directive
This should only be enabled for debugging.
* multipathd.service: don't load scsi_dh modules (bsc#1195397)
This is done via modules-load.d functionality on (open)SUSE
- Upstream fixes:
* Fix claiming of paths with "find_multipaths strict"
* Avoid unnecessary read-only reloads
-------------------------------------------------------------------
Fri Jan 7 19:51:14 UTC 2022 - Martin Wilck <mwilck@suse.com>
- Version 0.8.8+13+suse.79c3556f
* code-wise identical to 0.8.8+38+suse.2bdd3a14
(previous version number was too high by mistake)
-------------------------------------------------------------------
Mon Dec 06 15:53:53 UTC 2021 - mwilck@suse.com
- Update to 0.8.8+38+suse.2bdd3a14.obscpio
* upstream version bump. Code-wise identical to 0.8.7+138+suse.7c9afe31
-------------------------------------------------------------------
Fri Dec 3 11:00:32 UTC 2021 - Martin Wilck <mwilck@suse.com>
- Drop versioned dependency on libmpath0 again (bsc#1190622)
* Since 0.8.6, libmultipath and libmpathpersist have got proper ABI
versioning, and rpmbuild auto-generates dependencies on
libmultipath.so.0(LIBMULTIPATH_13.0.0) etc.
-------------------------------------------------------------------
Thu Dec 2 16:41:34 UTC 2021 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.7+138+suse.7c9afe31:
New upstream version (pre-0.8.8)
* deprecate "config_dir" and "multipath_dir" config options
(will be removed in future version)
* remove dependency on systemd-udevd-settle.service (boo#1193336)
* fix crash in remove_map (boo#1193334)
* CLI: add path wildcard "%I" for init state
* CLI: add "reconfigure all" command
* allow multiple pending "reconfigure" commands (bsc#1189551)
* speed up "reconfigure" by avoiding unnecessary map reloads
(bsc#1189551)
* rework of CLI command handler (unix socket handler) to avoid
hanging CLI commands (bsc#1189551)
* fix multipathd startup after stop during reconfigure (boo#1193338)
* improve error detection and warning messages in config file parser
* fix exit status of multipath -T (bsc#1191900)
* fix defects reported by coverity (boo#1193342)
- avoid sleeping with locks held
- exit if bindings file is broken
- set umask before mkstemp
- add bounds and consistency checks in SCSI VPD parsing code
* add hardware table entry for DellEMC/ME4 (PowerVault ME4)
-------------------------------------------------------------------
Tue Sep 21 09:45:42 UTC 2021 - Martin Wilck <mwilck@suse.com>
- Add a versioned dependency of multipath-tools on libmpath0
(bsc#1190622)
-------------------------------------------------------------------
Fri Sep 10 20:36:51 UTC 2021 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.7+14+suse.5a09bfa1:
* Fix possible string overflows (bsc#1188148)
- Upstream fixes / changes
* better string handling
* multipath: print warning if multipathd isn't running
* mpathpersist: better error msg when no usable paths exist
* fixes from 0.8.6+32+suse.f11c192 merged upstream
-------------------------------------------------------------------
Fri Aug 13 11:03:13 UTC 2021 - Martin Wilck <mwilck@suse.com>
- Spec file: remove compatibility code for SLE <= SLE15-SP2
-------------------------------------------------------------------
Thu Aug 12 20:08:23 UTC 2021 - mwilck@suse.com
- Update to version 0.8.6+32+suse.f11c192:
* libmultipath:fix compilation with glibc 2.34 (bsc#1189099)
* libmultipath: avoid buffer size warning with systemd 240+
(bsc#1189176)
* libmultipath: use uint64_t for sg_id.lun (bsc#1187534)
- Upstream bug fixes:
* multipath-tools: make HUAWEI/XSG1 config work with alua and multibus
* multipath-tools: add info about HPE Alletra 6000 and 9000
* multipathd: cli_getprkey(): fix return value and "aptpl" support
* multipathd: don't rescan_path on wwid change in uev_update_path
* kpartx: Don't leak memory when getblock returns NULL
* multipath: free vectors in configure
* multipathd: fix ev_remove_path return code handling
* multipathd: remove duplicate orphan_paths in flush_map
* multipathd: don't fail to remove path once the map is removed
* multipathd: fix compilation issue with liburcu < 0.8
-------------------------------------------------------------------
Tue Jun 8 09:34:23 UTC 2021 - Ludwig Nussel <lnussel@suse.de>
- install to /usr on Tumbleweed (boo#1029961)
-------------------------------------------------------------------
Tue May 18 17:43:13 UTC 2021 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.6+10+suse.47711374:
* Github workflows: add CI for SUSE-specific branches
-------------------------------------------------------------------
Fri Apr 2 00:01:23 UTC 2021 - Martin Wilck <mwilck@suse.com>
- Disabled LTO for multipath-tools
* The test for is_valid_path fails if LTO is enabled, just
disabling it for %check is insufficient.
-------------------------------------------------------------------
Thu Apr 01 21:00:32 UTC 2021 - mwilck@suse.com
- Update to version 0.8.6+9+suse.6c05a61:
Update to upstream 0.8.6.
* add eh_deadline option to avoid endless SCSI error handling
* add wwid_recheck option to detect storage configuration changes
* add library versioning for libmultipath, libmpathpersist etc. and
to libmultipath plugins
* move some global symbols to libmultipath (udev, logsink, etc)
and provide default implementations for get_multipath_config() etc.
This allows simplifiying libmpathpersist_example.c drastically.
* fixes for shutdown issues and various race conditions on exit
* improve cleanup on exit, fix memory leaks
* add libmpathvalid library
* fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081)
* Avoid access to root FS while queueing IO (bsc#1178049,
bsc#1181234)
* lots of bug fixes, additions to built-in hardware table, and
CI improvements (bsc#1186212)
* kpartx: free loop device after listing partitions (boo#1107187)
Bug fixes on top of 0.8.5 mentioned below are also included in
this upstream version.
-------------------------------------------------------------------
Thu Apr 01 11:01:34 UTC 2021 - mwilck@suse.com
- Update to version 0.8.5+30+suse.633836e:
* multipathd: give up "add missing path" after multiple failures
(bsc#1183963)
-------------------------------------------------------------------
Thu Mar 18 09:48:47 UTC 2021 - mwilck@suse.com
- Update to version 0.8.5+29+suse.5dabcd2:
* 11-dm-mpath.rules: run "multipath -U" with -v1 (bsc#1182871)
* libmultipath: merge update_multipath_table() and update_multipath_status()
(bsc#1183666)
-------------------------------------------------------------------
Fri Mar 12 14:53:41 UTC 2021 - mwilck@suse.com
- Update to version 0.8.5+26+suse.2cbedfd:
Avoid "illegal request" errors on non-RDAC storage
(bsc#1182072, bsc#1177371)
-------------------------------------------------------------------
Wed Mar 10 10:16:38 UTC 2021 - mwilck@suse.com
- Update to version 0.8.5+23+suse.c11b054:
* multipath -U: reduce log level of "adding new path" message
(bsc#1181435, bsc#1183666)
-------------------------------------------------------------------
Wed Feb 10 14:30:15 UTC 2021 - mwilck@suse.com
- Update to version 0.8.5+22+suse.e1e3c48:
* multipath-tools tests: fix stringop-overflow build errors with gcc 11
(bsc#1181877)
* README moved to README.md (has been converted to markdown upstream)
-------------------------------------------------------------------
Wed Dec 16 12:11:07 UTC 2020 - mwilck@suse.com
- Update to version 0.8.5+12+suse.3b0e9ca
* libmultipath: force map reload if udev incomplete
(bsc#1178662, bsc#1172157, bsc#1175454, bsc#1176406)
- Fixes from upstream 0.8.5
* multipath-tools: add MacroSAN arrays to hwtable
* libmultipath: Allow discovery of USB devices
(add configuration option "allow_usb_devices")
-------------------------------------------------------------------
Fri Dec 4 11:27:54 UTC 2020 - Martin Wilck <mwilck@suse.com>
- Remove compatibility code for SLE <= 12-SP2 from spec file
-------------------------------------------------------------------
Thu Sep 17 16:18:54 UTC 2020 - Martin Wilck <mwilck@suse.com>
- Bugref for all minor fixes since SLE15-SP2 release (bsc#1176670)
- Added README.alua
-------------------------------------------------------------------
Wed Sep 16 20:36:40 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+192+suse.1bc10ad:
* Fix handling of hardware properties for maps without paths
(bsc#1176644)
-------------------------------------------------------------------
Wed Sep 16 16:44:13 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+190+suse.fe234ea:
* Fixes for daemon shutdown issues from SLE(bsc#1110060, bsc#1110439)
- multipathd: allow shutdown during configure()
* fix compilation of external programs with -lmultipath
(bsc#1133957, necessary after the above fix)
* Minor upstream fixes
-------------------------------------------------------------------
Thu Sep 10 19:06:10 UTC 2020 - Martin Wilck <mwilck@suse.com>
- Missing past changelog bug references:
* 0.7.3+10+suse.70ccb55b0439:
Patch series for NVMe discovery and failover (bsc#1038865,
bsc#1057820)
* 0.7.9+109+suse.203c1cf
* setup_map: wait for pending path checkers to finish
(bsc#1118224)
-------------------------------------------------------------------
Thu Aug 27 09:35:56 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+183+suse.1817ce2:
Added reviewed upstream fix for multipath crash
* multipath: get_dm_mpvec: discard broken maps
-------------------------------------------------------------------
Wed Aug 26 10:01:17 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+180+suse.50a2698:
* Fix memory access / leak issues found with valgrind
-------------------------------------------------------------------
Fri Aug 21 22:28:33 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+170+suse.801341f:
* libmultipath: tests: fix bitfield tests
* Spec file: disable LTO for %check (bsc#1133122)
-------------------------------------------------------------------
Thu Aug 20 19:20:59 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+167+suse.70bef90:
Pull in reviewed upstream changes
- Bug fixes
* libmultipath: add consistency check for alias settings (bsc#1172429)
* libmultipath: select_action(): don't drop map if alias clashes (bsc#1172429)
* libmultipath: refuse reloading an existing map with different WWID
(bsc#1172429)
* libmultipath: select_action(): force udev reload for uninitialized maps
(bsc#1172157)
* multipathd: uev_trigger(): handle incomplete ADD events (bsc#1172157)
* improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064)
* libmultipath: add device to hwtable.c (bsc#1174026) (ETERNUS AHB)
- New features
* multipath: add -D option to skip multipathd delegation
* multipath: delegate flushing maps to multipathd
* multipathd: add "del maps" multipathd command
- Other changes
* cleanup disassemble_map() code path (bsc#1178377, bsc#1178379)
* multipath-tools: introduce INIT_REMOVED state
* logging improvements
* fix "multipathd show devices"
* libmultipath: remove uevent listener failback
* libmultipath: create bitfield abstraction
* libmultipath: count pending paths as active on loads
* kpartx: handle alternate bsd disklabel location
- Lots of minor fixes and cleanups
- Spec file: use %service_del_postun_without_restart macro
-------------------------------------------------------------------
Wed Jun 10 10:56:49 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+43+suse.908383f:
* enable negated regular expression syntax in conf file
(bsc#1182917)
* change default devnode blacklist to
'!^(sd[a-z]|dasd[a-z]|nvme[0-9])'
-------------------------------------------------------------------
Mon Jun 08 16:13:31 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+40+suse.b06c2e5a:
- Fix udev rule processing during coldplug (bsc#1172157)
* 11-dm-mpath.rules: Fix udev rule processing during coldplug
- Fix compilation with gcc-10
* fix boolean value with json-c 0.14
* libmultipath: fix condlog NULL argument in uevent_get_env_var
- Reviewed upstream changes:
* simplify failed_wwid code
* centralize path validation code
- Use pkgconfig for BuildRequires
-------------------------------------------------------------------
Tue May 12 20:17:49 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+31+suse.8f53764:
* Fix sporadic build failures caused by missing build dependencies
-------------------------------------------------------------------
Mon May 11 22:18:07 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+29+suse.c27ed8d:
* multipath-tools: Makefile.inc: set -Wno-error=clobbered
* Makefile.inc: keep warning flags during rpm build
* Eliminate compiler warnings on 32bit build.
* Fixes for tests under i586
- Spec file: add %check section to run multipath-tools CI
* not on SLE12, as cmocka is missing
* add build dependency on cmocka for building tests
* run "make test" with parallel make
-------------------------------------------------------------------
Mon May 11 12:25:31 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+19+suse.48fc2f4:
* multipath: add "-e" option to enable foreign libraries
* libmultipath: set "enable_foreign" to NONE by default
* deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch
(included in factory git repo now).
* Makefile: dependency fixes for parallel build
- Get rid of %is_opensuse:
* drop build workaround for Leap 42.1
* build libdmmp for everything except SLE12/Leap42 and older
- Other spec file updates:
* use %make_build to speed up build (possible with 0.8.4)
- Migrated to .obscpio format.
-------------------------------------------------------------------
Fri May 08 16:13:36 UTC 2020 - mwilck@suse.com
- Update to version 0.8.4+16+suse.f319f7ea
- Changed github workflow back from merge-based to rebase-based.
This makes it much easier to assess differences between upstream
and SUSE code.
* Use TAG_OFFSET in _service, as this is now possible again.
- Reviewed upstream patches added:
* kpartx.rules: fix handling of synthetic uevents (bsc#1161923)
* libmpathpersist: limit PRIN allocation length to 8192 bytes
(bsc#1165786)
- Update upstream version to 0.8.4
* drop nr_active field, always count active paths (bsc#1125043)
* kpartx: fix detection of dasd partition tables on loop devices
(bsc#1139775)
* directio path checker fixes
* lots of fixes for compiler warnings, and cleanups
* nvme: update to nvme-cli 1.9
-------------------------------------------------------------------
Wed Feb 12 20:41:59 UTC 2020 - mwilck@suse.com
- Update to version 0.8.3+11+suse.7dcdf2f:
* libmultipath: fix files read from config_dir (bsc#1162896)
-------------------------------------------------------------------
Thu Jan 16 12:11:54 UTC 2020 - mwilck@suse.com
- Update to version 0.8.3+10+suse.86684b9:
* libmultipath: fix compilation with -fno-common
(boo#1160403)
-------------------------------------------------------------------
Fri Oct 04 10:22:41 UTC 2019 - mwilck@suse.com
- Update to version 0.8.3+9+suse.f6f2a52
- Minor upstream improvements and bug fixes
* libmultipath: EMC PowerMax NVMe device config
-------------------------------------------------------------------
Wed Sep 04 08:39:34 UTC 2019 - mwilck@suse.com
- Update to version 0.8.2+27+suse.3ff280b:
* Added upstream patch to fix premature path reinstantiation
with san_path_err_XX (boo#1149319)
-------------------------------------------------------------------
Thu Aug 29 08:22:13 UTC 2019 - mwilck@suse.com
- Update to version 0.8.2+26+suse.d884195:
- Don't activate NVMe native multipath support by default
* multipath.conf.5: document foreign library support
* multipath.conf: add "enable_foreign" parameter (bsc#1139837)
* Set default for "enable_foreign" to "NONE" (bsc#1139837)
added libmultipath-set-enable_foreign-to-NONE-by-default.patch
- Added reviewed upstream patches (marginal path patch set from Red Hat)
* add "marginal_pathgroups" config option
* deprecate "delay_wait_checks" and "delay_watch_checks"; they are
now automatically mapped to eqivalent "san_path_err_..." settings.
-------------------------------------------------------------------
Tue Jul 16 13:01:13 UTC 2019 - mwilck@suse.com
- Update to version 0.8.2+11+suse.0f6a649:
* kpartx: recognize DASD on loop devices again (bsc#1139775)
* Bump version to 0.8.2 - most changes were already in SUSE tree
* Man page improvements (bsc#1148767)
-------------------------------------------------------------------
Tue Jul 02 22:21:14 UTC 2019 - mwilck@suse.com
- Update to version 0.8.1+59+suse.f947184:
* libmultipath: trigger uevents for partitions, too (bsc#1140146)
-------------------------------------------------------------------
Tue Jun 25 20:55:38 UTC 2019 - mwilck@suse.com
- Update to version 0.8.1+58+suse.2af8f92:
* libmultipath: more cautious blacklisting by missing property
(don't blacklist paths because of temporarily missing
udev properties)
* libmultipath: fix memory leak with "uid_attrs" config option
* libmultipath: get_uid: straighten the fallback logic
- Fix SCSI VPD 0x80/0x83 parsing
- Fix compiler warnings introduced by gcc 9:
* -Wstringop-overflow, -Wstringop-truncation,
-Waddress-of-packed-member
-------------------------------------------------------------------
Tue Jun 25 15:42:56 UTC 2019 - mwilck@suse.com
- Update to version 0.8.1+28+suse.fea562a:
* mpathpersist: optimize for setups with many LUNs (bsc#1134648)
* mpathpersist: add option -f/--batch-file (bsc#1134648)
* libmultipath: get_prio(): really don't reset prio for
inaccessible paths (bsc#1118495)
- Upstream bug fixes from dm-devel (bsc#1139369):
* multipath: call store_pathinfo with DI_BLACKLIST
* multipathd: fix REALLOC_REPLY with max length reply
* libmultipath: make vector_foreach_slot_backwards work as expected
* multipathd: fix client response for socket activation
(bsc#1133861)
* various minor fixes (coverity)
-------------------------------------------------------------------
Tue Apr 30 14:48:40 UTC 2019 - mwilck@suse.com
- Disable kmod() style dependencies again (bsc#1119414)
* For TW, dependencies will be autogenerated
(gh#openSUSE/rpm-config-SUSE#3)
* For SLE, feature is currently rejected (jsc#SLE-3853)
- Update to version 0.8.1+8+suse.8c11498:
* Avoid deadlock situation during udev settle
(bsc#1131789, bsc#1125145)
- multipath -u: test socket connection in non-blocking mode
* Fix priority handling for offline paths
(bsc#1118495)
- Update to upstream 0.8.1 (bsc#1148767)
* Avoid device IO in "multipath -u" (bsc#1125145)
* multipathd: protect all access to running_state
(bsc##1110060, bsc#1110439)
* Improve handling of changed WWIDs and temporary failure
to obtain WWID. Option "disable_changed_wwids" is now ignored.
(bsc#1184260)
* Fixes for PATH_PENDING state handling (bsc#1125043)
* libmultipath: hwtable: add Lenovo DE series (bsc#1125507)
-------------------------------------------------------------------
Sat Apr 13 19:59:45 UTC 2019 - Jan Engelhardt <jengelh@inai.de>
- Trim %if..%endif guards that do not affect the build result.
- Combine %service_* calls to reduce generated code.
- Make use of %make_install.
-------------------------------------------------------------------
Tue Mar 19 15:58:01 UTC 2019 - Martin Wilck <mwilck@suse.com>
- Re-enable kmod-style dependencies for multipath-tools package
(bsc#1119414)
- Separate out libmpath0 (bsc#1119414)
- Spec file improvements
* Add Conflicts: for older multipath-tools to libmpath0
* Move license files to the libmpath0 package, which contains the
code with complex licensing. The executables are GPL-2.0 anyway.
* Remove bogus dependency of -devel package on device-mapper
* -devel package depends on libmpath0, not multipath-tools
* Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer
(John Vandenberg <jayvdb@gmail.com>)
* Remove unused /var/cache/multipath directory
* Remove check for multipath maps in %pre and %post
* Remove SLE11-specific multipathd service stop / start from
%pre / %post
* Remove obsolete tools from package description (bsc#1129827)
* Add -n to %service_del_{pre,post}un for multipathd.socket
-------------------------------------------------------------------
Fri Mar 15 13:57:44 UTC 2019 - Martin Wilck <mwilck@suse.com>
- Update to version 0.8.0+17+suse.a28893f:
* Code-identical to 0.7.9+139+suse.ed9d450, except for new
version number
- Disable kmod() style dependencies for now, as they are causing
problems with image builds (bsc#1119414). They'd been active
for SLE15-SP1 only, anyway.
- _service: determine "tag offset" manually, the patch count
determined by git is far too high.
-------------------------------------------------------------------
Thu Mar 7 16:39:42 UTC 2019 - Martin Wilck <mwilck@suse.com>
- Fix module name in multipath.conf (bsc#1119414)
* The modules-load.d entry must match the filename exactly
-------------------------------------------------------------------
Thu Mar 07 15:09:30 UTC 2019 - mwilck@suse.com
- Update to version 0.7.9+139+suse.ed9d450:
* multipath-tools: Build: properly parse systemd's version
-------------------------------------------------------------------
Tue Mar 5 14:12:54 UTC 2019 - Martin Wilck <mwilck@suse.com>
- Add kmod(xyz) style dependencies for SLE15-SP1
(jsc#SLE-3853, fate#326579, bsc#1119414)
-------------------------------------------------------------------
Tue Mar 05 09:29:04 UTC 2019 - mwilck@suse.com
- Update to version 0.7.9+138+suse.0edd0a2:
- Include reviewed fixes from upstream
* libmutipath: continue to use old state on PATH_PENDING
* libmultipath: disable user_friendly_names for NetApp
* multipath: blacklist zram devices
* various fixes for martinal path code
- Bug fixes:
* multipathd: Fix miscounting active paths (bsc#1125043)
* multipathd: avoid null pointer dereference in LOG_MSG
(bsc#1127873)
* minor fixes suggested by coverity (bsc#1127879)
-------------------------------------------------------------------
Fri Jan 11 20:39:36 UTC 2019 - Martin Wilck <mwilck@suse.com>
- Add BuildRequires on suse-module-tools
* we need it for regenerate_initrd_posttrans
-------------------------------------------------------------------
Wed Jan 09 14:50:43 UTC 2019 - mwilck@suse.com
- Update to version 0.7.9+111+suse.b4232b7:
- merged upstream cb4a979a (SUSE bug fixes merged upstream,
code-identical to previous release).
-------------------------------------------------------------------
Tue Jan 08 23:26:41 UTC 2019 - mwilck@suse.com
- Update to version 0.7.9+109+suse.203c1cf:
* multipathd: avoid crash in cli_list_path (bsc#1121134)
* libmultipath: fix compilation with older kernel headers
(bsc#1121066)
- merged upstream fb824725
* Improved NVMe support in both native and dm-mpath mode
added basic NVMe ANA support (bsc#1119898, bsc#1118495)
* Fix prio output in "multipathd show topology" (bsc#1119897)
* multipathd: fix daemon not really shutdown
(bsc##1110060, bsc#1110439)
-------------------------------------------------------------------
Fri Dec 14 10:36:39 UTC 2018 - mwilck@suse.com
- Update to version 0.7.9+90+suse.f81e290:
* libmultipath: Increase SERIAL_SIZE to 128 bytes
(bsc#1107179)
-------------------------------------------------------------------
Wed Dec 12 22:23:22 UTC 2018 - mwilck@suse.com
- Update to version 0.7.9+89+suse.df77b66:
- re-enable "san_path_err_xy" options
These have been removed upstream, but they were supported
in SLE-15/Leap15.0, so we can't simply throw them away.
Improve documentation, mark them as deprecated, but keep
the code in place.
-------------------------------------------------------------------
Wed Dec 12 12:50:37 UTC 2018 - mwilck@suse.com
- Update to version 0.7.9+85+suse.766b95e:
* upstream patch series to make verbosity level 3
less verbose and thus better usable (bsc#1118937)
* fix for handling device size mismatch in coalesce_paths()
(bsc#1037379)
* libmultipath: fix false removes in dmevents polling code
(bsc#1116272)
* Spec file: remove build dependency on dracut which causes
build errors for some distributions
-------------------------------------------------------------------
Mon Nov 26 16:44:31 UTC 2018 - mwilck@suse.com
- Update to version 0.7.9+58+suse.0790830:
* libmpathpersist: fix off-by-one error in PRIN length check
(bsc#1099007)
* multipathd: fix mpp->hwe handling when paths are freed
(fix possible crash caused by new hardware table code)
-------------------------------------------------------------------
Wed Nov 14 11:37:32 UTC 2018 - mwilck@suse.com
- Update to version 0.7.9+55+suse.9fc8439:
(note the "55" is due to former merge operations. We actually
only have 7 patches on top of upstream. All other patches
referenced below as "not upstream" have been merged).
* Bump version to 0.7.9
* multipathd: reset delay_wait_checks counter on failure
(bsc#1114771)
* multipathd: fix irritating "minor number mismatch" message
(bsc#1111116)
* fix possible failure to shut down (bsc#1110060, bsc#1110439)
* upstream "checker overhaul" - cleanups and improvements for
path checkers
* Upstream fixes for failures handling path initializiation
* various small upstream bug fixes.
-------------------------------------------------------------------
Wed Oct 03 11:49:47 UTC 2018 - mwilck@suse.com
- Update to version 0.7.7+136+suse.19bb285:
Bug fixes from upstream, and SUSE bug fixes
* multipathd: try SCSI persistent reservations for SCSI only
(bsc#1108875)
* libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458)
* libmultipath: Fixup updating paths (bsc#1110418)
* multipathd: fix memory leak on error in configure (bsc#1110418)
* multipathd: minor fixes (bsc#1110418)
* multipathd: function return value tweaks (bsc#1110418)
* multipath: fix max array size in print_cmd_valid (bsc#1110418)
* libmutipath: don't use malformed uevents (bsc#1110418)
* libmultipath: fix null dereference int alloc_path_group (bsc#1110418)
* libmultipath: fix memory issue in path_latency prio (bsc#1110418)
* libmultipath: fix length issues in get_vpd_sgio (bsc#1110418)
* multipathd: decrease log level of uevent messages (bsc#1110586)
* multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587)
* libmultipath: pathinfo: skip hidden devices (bsc#1110586)
* libmultipath: nvme: shorter topology output (bsc#1082419)
* libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112)
* libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
(bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)
- Update to upstream 1a8625abd (0.7.7+82)
* minor fixes for kpartx, found by coverity
* mpathpersist: add --param-alltgpt option
* libmultipath: add "protocol" blacklist option.
* multipathd: add new wildcard "%P" for "protocol"
* multipath-tools: fix products names in hwtable
* libmultipath: more debug output in alua prioritizer (bsc#1080965)
* libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION
(bsc#1080965)
* libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965)
-------------------------------------------------------------------
Mon Jul 02 12:01:36 UTC 2018 - mwilck@suse.com
- Update to version 0.7.7+75+suse.6287aef:
Added minor updates from upstream
* multipath-tools: add info about how to enable ALUA in ONTAP
* multipath-tools: add directio path_checker for DASD devices
* multipath-tools: make Product Name mandatory and add all of them
Minor rebase, as some SUSE patches have been merged upstream
(all mentioned in previous changelogs)
-------------------------------------------------------------------
Fri Jun 29 07:57:45 UTC 2018 - mwilck@suse.com
- Update to version 0.7.7+72+suse.4b24466:
* multipath: fix return code handling in delegate_to_multipathd
(bsc#1098177)
* multipath: don't start multipathd unnecessarily (bsc#1098177)
-------------------------------------------------------------------
Mon Jun 25 19:48:59 UTC 2018 - mwilck@suse.com
- Update to version 0.7.7+70+suse.4a5941e:
* libmultipath: change partition_delimiter default to "-part"
(bsc#1073622, bsc#1056526)
* change default for find_multipaths to "greedy" (bsc#1099054)
* libmultipath: allow distributions to change partition_delim default
(bsc#1073622, bsc#1056526)
-------------------------------------------------------------------
Mon Jun 25 16:20:23 UTC 2018 - mwilck@suse.com
- Update to version 0.7.7+67+suse.a7d1e14:
- RBD/RADOS backend support has been removed upstream
remove support for it in SUSE, too (boo#1099037, FATE#826853)
* added Obsoletes: for multipath-tools-rbd.
- libdmmp version has changed to 0.2.0
- New patches not yet upstream:
(Wed Jun 12 2018: these are now upstream, since 0.7.8)
* multipathd: fix mpp->hwe handling on path removal (boo#1099028)
* libmultipath: print correct default for delay_*_checks
(boo#1099026, bsc#1110418)
* libmultipath: avoid error messages from RDAC check
(bsc#1108728, bsc#1075539)
* (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
* libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
* multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
* libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
* libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
(bsc#1099007)
* multipathd: fix buffer size in cli_getprkey (bsc#1099028)
* libmultipath: fix gcc 8.1 "truncated output" warnings
(bsc#1099007)
* libmpathpersist: fix typo in mpath_format_readfullstatus
(bsc#1099007)
* libmpathpersist: remove duplicate test in readfullstatus
(bsc#1099007)
- SUSE specific patches preserved:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
* kpartx: create symlinks for dmraid devices (bsc#1064212)
* multipath.conf.5: document no_partitons compat support (fate#323406)
* libmultipath: compat support for 'features "1 no_partitions"' (fate#323406)
* Added fossology assessment as README.licenses (bsc#1088801)
- Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0):
* libmultipath: don't [un]set queue_if_no_path after domap
obsoleted by "libmultipath: cleanup features handling code"
* multipath.rules: use -i flag to multipath
obsoleted by path detection patch series
* libmpathpersist: add support for prkeys file v3
obsoleted by "mpathpersist: Fix invalid condition check"
* libmultipath: fix deadlock in tur.c
obsoleted by "libmultipath: fix tur checker locking"
* checkers/rbd: missing pthread_lock() on failure path
obsolete because of RBD removal
* libmultipath/hwtable: don't hard-code ALUA for IBM IPR
obsoleted by "libmultipath: hwhandler auto-detection for ALUA" and
"libmultipath: don't reject maps with undefined prio"
(bsc#1085212, bsc#1075129)
- Update to upstream version 0.7.7+50 (39ad8dc8)
- rework of "find_multipaths" logic
* find_multipaths can now be "strict", "yes", "no", "greedy", or "smart"
* SUSE default is "greedy" for now, consistent with previous behavior
* "multipath -u -i" not necessary in udev rules any more
(removed SUSE patch "multipath.rules: use -i flag to multipath")
- patch series for config file handling (bsc#1067789):
* fix inconsistent handling of multiple config file entries
matching the same device (bsc#1067789)
* multipath: implement "multipath -T" (bsc#1067789)
* multipathd: implement "show config local" (bsc#1067789)
* libmultipath: merge "multipath" config sections by wwid
* multipathd: add path format wildcard "%0" for failures
* libmultipath: config parser: Allow '"' in strings
- multipath-tools: foreign/NVME implementation (bsc#1082419) for
native NVME multipath configurations
- Other new upstream features:
* mpathpersist: add all_tg_pt option
* add polling dmevent handler (only one thread waiting for device-mapper
events rather than one per map).
* multipath: add "ghost_delay" parameter
* "marginal path" path state checking for better handling of
unstable "shaky" connections in a SAN.
conf options "marginal_path_err_rate_threshold" etc, see man page.
This replaces the previous "san_path_err_threshold" functionality.
- Upstream bug fixes:
* Man page corrections and improvements for multipath.conf(5)
* libmultipath: fix memory leak in process_config_dir() (bsc#1110352)
* multipath: don't check timestamps without a path
* multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
* libmultipath: don't reject maps with undefined prio (bsc#1085212,
bsc#1075129)
* multipathd: fix reservation_key check (bsc#1099008)
* 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
(bsc#1084748)
* libmultipath: hwhandler auto-detection for ALUA
(bsc#1085212, bsc#1075129)
* multipath: fix rcu thread cancellation hang (bsc#1110418)
* multipathd: register threads that use rcu calls (bsc#1110418)
* multipathd: fix waiter thread cancelling
* multipathd: use nanosleep for strict timing (avoids possible
races with SIGALRM)
* logging fixes:
* libmultipath: fix log_pthread processing
* libmultipath: set dm_conf_verbosity
* libmultipath: fix basenamecpy
* libmultipath: uev_update_path: update path properties
* libmultipath: uev_update_path: always warn if WWID changed
* libmultipath: get_uid: don't quit prematurely without udev
(bsc#1108728)
* libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728)
* libmultipath: fix wrong output of "multipath -t"
* Introduce the libmultipath/unaligned.h header file
(bsc#1099036)
* libmultipath: Fix sgio_get_vpd() (bsc#1099484)
* kpartx: Improve reliability of find_loop_by_file()
* libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is '\0'-terminated
* libmultipath: enable feature disable changed wwid by default
* multipathd: add lock protection for cli_list_status
* bug fixes for "marginal path checker"
* multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439,
bsc#1086025)
* multipath-tools: add INSPUR/MCS to hardware table
* multipath-tools: add RDAC SUN/ArrayStorage to hwtable
* multipath-tools: remove DF arrays from HP
* multipath: print sysfs state in fast list mode (bsc#1110354)
* multipathd: remove coalesce_paths from ev_add_map
* multipath: fix DEF_TIMEOUT use
* libmultipath: fix tur checker locking
* multipath-tools: handle exit signal immediately (bsc#1086025)
* multipathd: release uxsocket and resource when cancel thread
(bsc#1110355)
* path latency prioritizer fixes
* multipathd.service: set TasksMax=infinity (bsc#1060616)
* multipathd.service: drop Before=lvm2-lvmetad.service
(bsc#1070427)
* multipathd.socket: add WantedBy=sockets.target
* kpartx.rules: fix by-id/scsi-* for user_friendly_names
* multipath -C: decrease log level
* libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
* libmultipath: hwtable: multibus for NetApp NVMe-FC
* libmultipath: select ALUA prioritizer for RDAC arrays only
(bsc#1075539, bsc#1081241)
* libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
* libmultipath: condlog: log to stderr (bsc#1055949)
* multipath: delegate dangerous commands to multipathdd (bsc#1047639)
* libmultipath: don't try to set hwhandler if it is retained
(bsc#1047639)
* libmultipath: don't update path queueing on reload
* multipathd: marginal path code fixes
* multipath: check failed path dmstate in check_path
* multipathd: clean up set_no_path_retry
* multipathd: fix device creation issues
* libmultipath: cleanup features handling code
* multipath: fix hwhandler check in select_action
* kpartx: don't delete partitions from partitions
* limbultipath: prefer RDAC checker with detect_checker
* multipath-tools: add AccelStor/NeoSapphire to hardware table
* multipath-tools: add TMS/RamSan to hardware table
* multipath-tools: add XIV/NEXTRA to hardware table
* multipath-tools: add XIOtech/Magnitude to hardware table
* libmultipath: ensure checker->fd == -1 if not set
-------------------------------------------------------------------
Thu Apr 12 19:30:09 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+69+suse.218a0d0:
* multipath -ll: print foreign maps only with "-o" flag
(bsc#1089353)
* Revert "disable nvme foreign library"
-------------------------------------------------------------------
Thu Apr 12 18:46:24 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+67+suse.8f0c27b:
* disable nvme foreign library (bsc#1089353)
-------------------------------------------------------------------
Tue Apr 10 21:42:56 UTC 2018 - mwilck@suse.com
- No functional changes
- Fixed rpmlint warnings (bsc#1088946)
* multipath-tools-devel: moved .so files to /usr/lib[64]
* added version dependencies for -devel packages
-------------------------------------------------------------------
Tue Apr 10 21:26:30 UTC 2018 - mwilck@suse.com
- No functional changes
* fixed SPDX syntax (and -> AND)
* added /usr/share/licenses
-------------------------------------------------------------------
Tue Apr 10 08:04:40 UTC 2018 - mwilck@suse.com<
- No functional changes, just licenses
- Spec file: fix %license tags and info after closer inspection
(bsc#1088801)
* kpartx is under GPL-2.0-only
* rbd is under LGPL-2.1-only
- Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
* Added fossology assessment as README.licenses
* multipath-tools: create LICENSES dir with the text of all used licences
-------------------------------------------------------------------
Fri Apr 06 09:54:45 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+61+suse.d4d0494:
* 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
(bsc#1084748)
-------------------------------------------------------------------
Wed Mar 28 20:31:51 UTC 2018 - mwilck@suse.com
- Fixed license tags in spec file
* multipath tools / libmultipath is GPL-2.0-only
* libmpathcmd is LGPL-2.0-or-later
* libdmmp is GPL-3.0-or-later
* adopt SPDX format.
-------------------------------------------------------------------
Wed Mar 28 20:01:01 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+60+suse.46ac839:
* libmultipath/hwtable: don't hard-code ALUA for IBM IPR
(bsc#1085212, bsc#1075129)
-------------------------------------------------------------------
Wed Mar 21 08:32:13 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+59+suse.1b6191c26774:
* libmultipath: don't reject maps with undefined prio (bsc#1085212,
bsc#1075129)
* multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
-------------------------------------------------------------------
Tue Mar 20 14:55:34 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+57+suse.bb6be4c8b4ca:
* multipathd: fix signal blocking logic (bsc#1086025)
* multipath-tools: handle exit signal immediately (bsc#1086025)
* multipath: fix DEF_TIMEOUT use (bsc#1086014)
* multipath-tools: foreign/NVME implementation v2 (upstream accepted)
(bsc#1082419)
-------------------------------------------------------------------
Mon Feb 26 12:53:28 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+53+suse.140f4937e9e7:
* libmultipath: fix wrong output of "multipath -t" (bsc#1082835)
-------------------------------------------------------------------
Thu Feb 22 20:40:42 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+52+suse.08a969b7fce0:
- Add limited support for displaying native NVMe multipath
(bsc#1082419)
* libmultipath: foreign/nvme: implement path display
* multipathd: use foreign API
* multipath: use foreign API
* libmultipath/foreign: nvme foreign library
* libmultipath/print: add "%G - foreign" wildcard
* libmultipath: API for foreign multipath handling
* libmultipath: print: use generic API for get_x_layout()
* libmultipath: print: convert API to generic data type
* libmultipath: "generic multipath" interface
* libmultipath: add vector_convert()
* libmultipath: add vector_free_const()
* libmultipath: get rid of selector "hack" in print.c
- Fix locking errors detected by coverity check (bsc#1082418)
* checkers/rbd: missing pthread_lock() on failure path
* libmultipath: fix deadlock in tur.c
-------------------------------------------------------------------
Mon Feb 12 10:55:30 UTC 2018 - mwilck@suse.com
- Fix whitespace in dracut conf file (bsc#1080562)
-------------------------------------------------------------------
Tue Jan 30 20:00:31 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+38+suse.a16beed5280a:
* kpartx: don't delete partitions from partitions (bsc#1078362)
* hwtable: add latest updates (bsc#1078363)
* multipathd.service: set TasksMax=infinity (bsc#1060616)
-------------------------------------------------------------------
Fri Jan 26 13:52:10 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+31+suse.6804bb73f72d:
* libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
(bsc#1073319)
-------------------------------------------------------------------
Fri Jan 19 18:09:52 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+30+suse.6b5ed839:
* multipath.rules: temporary rule to obtain ID_WWN for NVMe
(bsc#1076828)
* libmultipath: ignore natively multipathed NVME devices
(bsc#1076828)
* multipath.rules: handle NVME devices (bsc#1076828)
* FIX "libmultipath: hwtable: multibus for NetApp NVMe-FC"
(bsc#1073319)
* libmultipath: increase path product_id/rev field size for NVMe
(bsc#1073319)
-------------------------------------------------------------------
Tue Jan 16 14:18:15 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+25+suse.7c9920e2:
* assemble_map: no newline at end of params string (bsc#1072253)
-------------------------------------------------------------------
Thu Jan 11 12:38:41 UTC 2018 - mwilck@suse.com
- Update to version 0.7.3+24+suse.703a61d5:
* multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
* libmultipath: hwtable: multibus for NetApp NVMe-FC
(bsc#1073319)
* libmultipath/propsel: select ALUA prioritizer for RDAC arrays only
(bsc#1075539, bsc#1081241)
* libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
* libmultipath: sgio_get_vpd: add page argument (bsc#1055949)
* libmultipath: fix return code of sgio_get_vpd() (bsc#1055949)
-------------------------------------------------------------------
Fri Dec 22 20:19:40 UTC 2017 - mwilck@suse.com
- Update to version 0.7.3+19+suse.0fd18bdd:
* multipathd.socket: add WantedBy=sockets.target (bsc#1072253)
-------------------------------------------------------------------
Fri Dec 22 17:21:57 UTC 2017 - mwilck@suse.com
- Update to version 0.7.3+18+suse.8c97f433:
* multipath -C: decrease log level (bsc#1072504)
-------------------------------------------------------------------
Fri Dec 22 16:30:47 UTC 2017 - mwilck@suse.com
- Update to version 0.7.3+17+suse.cac42e6f:
* test-kpartx: add test for mapping without UUID
(bsc#1074013)
-------------------------------------------------------------------
Wed Nov 29 21:41:37 UTC 2017 - mwilck@suse.com
- Update to version 0.7.3+15+suse.570d5938:
* kpartx.rules: fix by-id/scsi-* for user_friendly_names
(bsc#1066893)
-------------------------------------------------------------------
Mon Nov 20 17:59:50 UTC 2017 - mwilck@suse.com
- Update to version 0.7.3+14+suse.da06e7f3:
* libmultipath: fix return code of sysfs_get_timeout (bsc#1069037)
-------------------------------------------------------------------
Mon Nov 6 14:46:03 UTC 2017 - mwilck@suse.com
- added sample code for libmpathpersist (bsc#1066376)
* added libmpathpersist-example.c
- multipath-tools.spec: package libmultipath.so symlink in -devel
package (bsc#1066376). We *do not* package header files for
libmultipath, as the APIs are not public.
-------------------------------------------------------------------
Fri Nov 3 09:57:57 UTC 2017 - mwilck@suse.com
- multipath-tools.spec: package *.so symlinks in -devel pkgs
(bsc#1066376)
- multipath-tools.spec: SLE15: add RADOS support for s390x
(bsc#1066380)
- Fix build error for targets SLE_12, SLE_12_SP1
(bsc#1066392)
-------------------------------------------------------------------
Thu Oct 26 17:19:39 UTC 2017 - mwilck@suse.com
- Update to version 0.7.3+13+suse.db431514080f:
* kpartx: create symlinks for dmraid devices (bsc#1064212)
* limbultipath: prefer RDAC checker with detect_checker
(bsc#1055949)
-------------------------------------------------------------------
Tue Oct 17 08:54:25 UTC 2017 - hare@suse.com
- Update to version 0.7.3+11+suse.4de08d96:
* libmultipath: condlog: log to stderr (bsc#1063059)
-------------------------------------------------------------------
Thu Sep 21 12:32:25 UTC 2017 - mwilck@suse.com
- Update to version 0.7.3+10+suse.70ccb55b0439:
- Rebase to upstream release 0.7.3
* libmultipath: add pthread_cleanup hook for udev monitor
* libmultipath: pull functions into util.c
* libmultipath: change reservation_key to a be64
* libmpathpersist: fix update_prflag code
* multipath: add alternate reservation_key method
* mpathpersist: add support for prkeys file
* multipath-tools: minor edition and corrections in multipath.conf.5
* multipath-tools: fix incorrect length for strncmp in uevent.c
* multipath-tools: clarify how to dump the multipathd config
* multipath-tools: replace "setting: array" with "setting: storage device" at multipath output
* libmultipath: sanitize fd handling
* multipath-tools: link internal libraries before foreigns
* multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
* multipath-tools: add support for all arrays from Sun StorEdge 3000 family
* multipath-tools: add Xiotech iglu blaze arrays to hwtable
* multipath-tools: add Dot Hill/Seagate arrays to hwtable
* libmultipath: update INFINIDAT builtin config
* multipath-tools: add info about adding new hardware
* multipath-tools: Remove the limitation of IPC command reply length.
* multipath-tools: libdmmp: Improve timeout mechanism
* multipath-tools: libdmmp: New function to flush and reconfig
* Bump version to 0.7.3
- minor fixes for upstream 0.7.3
* libmultipath: ensure checker->fd == -1 if not set
* libmpathpersist: add support for prkeys file v3
* multipath: add man page info for my prkey changes
- Patch series for NVMe discovery and failover (bsc#1038865)
* discovery: sanitize NVMe discovery
* libmultipath/discovery: modify NVMe path states
* Add 'none' checker
* hwtable: set 'none' as default checker for NVMe
-------------------------------------------------------------------
Mon Sep 18 21:15:09 UTC 2017 - mwilck@suse.com
- Update to version 0.7.2+49+suse.993a29b1188d:
* Revert "11-dm-mpath.rules: Remember DM_ACTIVATION" (boo#1059227)
* Revert "11-dm-mpath.rules: don't set READY->ACTIVATION"
(boo#1059227)
* multipath: delegate using libmpathcmd (bsc#1047639)
-------------------------------------------------------------------
Mon Sep 18 20:44:02 UTC 2017 - mwilck@suse.com
- split off rados support into separate multipath-tools-rbd package.
This avoids pulling in the whole rados/ibverbs/rdma stack with
multipath-tools. (bsc#1058504).
- multipath-tools-rbd is Recommended but not Required by multipath-tools.
-------------------------------------------------------------------
Sat Sep 02 21:38:13 UTC 2017 - mwilck@suse.com
- Update to version 0.7.2+44.3a8d750c:
Misc bug fixes:
* multipathd: don't flood system with sd_notify calls (bsc#1056011)
* libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
* libmultipath: add_feature: allow only 1 feature (bsc#1055635)
* multipath: delegate dangerous commands to multipathd (bsc#1047639)
* libmultipath: fix partition_delimiter config option (bsc#1056526)
* kpartx: helper functions for name and uuid generation (bsc#1056508)
* kpartx: search partitions by UUID, and rename (bsc#1056508)
* kpartx: fix a corner case when renaming partitions (bsc#1056508)
* kpartx: -d must work with empty partition table (boo#1056599)
* kpartx: only recognize dasd part table on DASD (boo#1056599)
Rework of the udev rules related to multipath and kpartx (bsc#1054363):
* libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
* libmultipath: add get_udev_device
* libmultipath: get_refwwid: use get_udev_device
* libmultipath: use const char* in some dm helpers
* libmultipath: add DI_NOIO flag for pathinfo
* libmultipath: add dm_get_multipath
* multipath: implement "check usable paths" (-C/-U)
* 11-dm-mpath.rules: multipath -U for READY check
* 11-dm-mpath.rules: import more ID_FS_xxx vars from db
* 11-dm-mpath.rules: no need to test before IMPORT
* 11-dm-mpath.rules: handle new maps with READY==0
* 11-dm-mpath.rules: don't set READY->ACTIVATION
* 11-dm-mpath.rules: Remember DM_ACTIVATION
* multipath.rules: set ID_FS_TYPE to "mpath_member"
* kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
* kpartx.rules: improved logic for by-uuid and by-label links
* kpartx.rules: create by-partuuid and by-partlabel symlinks
* kpartx.rules: generate type-name links only for multipath devices
* kpartx.rules: fix logic for adding partitions
* multipath/kpartx rules: avoid superfluous scanning
* kpartx/del-part-nodes.rules: new udev file
* kpartx.rules: move symlink code to other files
- multipath-tools.spec:
* added 68-del-part-nodes.rules to support partition deletion
* added 00-dont-del-part-nodes.rules to disable partition deletion
by default on openSUSE/SLES for now.
* added 11-dm-parts.rules to kpartx package
* added dracut.conf file to make sure 11-dm-parts.rules is included
in initrd
-------------------------------------------------------------------
Mon Aug 14 21:22:38 UTC 2017 - mwilck@suse.com
- Update to version 0.7.2+14+suse.5721c345:
* cli_add_map: Use CMD_NONE (bsc#1053515)
* multipath-tools: link internal libraries before foreigns
(bsc#1028132)
* multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in
pthread (bsc#1053757)
-------------------------------------------------------------------
Fri Aug 11 21:41:43 UTC 2017 - mwilck@suse.com
- Update to version 0.7.2+11+suse.448921a2:
* multipath.conf.5: document no_partitions compat support
* libmultipath: fixup compat support for 'features "1 no_partitions"'
-------------------------------------------------------------------
Fri Aug 11 12:40:17 UTC 2017 - mwilck@suse.com
- Dropped 67-kpartx-compat.rules (SUSE legacy).
* symlinks "/dev/mapper/${UUID}_part${X}" are not created any more,
only "/dev/mapper/${UUID}-part${X}" (with "minus")
- Dropped automatic kpartx invocation on dmraid devices (fate#323743)
- Rebase to upstream multipath-tools 0.7.2:
* libmultipath: retain_attached_hw_handler obsolete with 4.3+
* multipath-tools: move up TEMPLATE in hwtable
* multipath-tools: delete libdmmp/docs/man directory in make clean
* libmultipath: fix unit to seconds in log message for checker timeout
* multipath-tools: add HPE StoreVirtual 3200 family to hwtable
* multipath-tools: add HPE MSA 2050/2052 to hwtable
* multipath-tools: add/change fujitsu arrays
* multipath-tools: check sysfs path state for NVMe/NVMf
* multipath-tools: sync third-party headers with 3.13 upstream
* multipath-tools: beautify path_latency.c code
* multipath-tools: fix format in multipath.conf.5
* libmultipath: update 3PARdata builtin config
* Bump version to 0.7.2
- Update to version 0.7.2+8+suse.95e8f43e:
* libmultipath: don't try to set hwhandler if it is retained
(bsc#1037533)
* libmultipath: don't [un]set queue_if_no_path after domap
* kpartx/devmapper.h: remove dm_no_partitions
* libmultipath: compat support for 'features "1 no_partitions"'
(fate#323406)
* kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
(bsc#1047180)
* kpartx.rules: Use DM_ACTIVATION as condition (fate#323406)
* kpartx.rules: skip creating by-uuid and by-label links
(fate#32340)
-------------------------------------------------------------------
Thu Jul 20 08:01:22 UTC 2017 - mwilck@suse.com
- Update to version 0.7.1+69+suse.3bfa5af1:
* Merge branch 'sles12-sp3-fixes' into sles12-sp3
* libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated
(bsc#1048146)
* libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052)
* libmultipath: only listen for uevents with DEVTYPE=disk
(bsc#1048052)
* libmultipath: fix over-long NVME WWIDs
(bsc#1048146)
-------------------------------------------------------------------
Tue Jun 27 18:28:05 UTC 2017 - mwilck@suse.com
- Update to version 0.7.1+64+suse.aabe8c87:
* Updated "no_path_retry" patchset to v4 (minor change)
* kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092)
- _service: use "match-tag" to refer only to offical tags
-------------------------------------------------------------------
Wed Jun 21 20:41:18 UTC 2017 - mwilck@suse.com
- Update to version 0.7.1+62+suse.62a2c36e:
* kpartx: only check for 'no_partitions' feature on dm devices
(bsc#1037533)
* Revert "kpartx: use mapname if no uuid is present"
(bsc#1037533, bsc#1033541)
- "no_path_retry" patch series (bsc#1043027)
* libmultipath: load_config: skip setting unnecessary defaults
* libmultipath: add/remove_feature: use const char* for feature
* libmultipath: clarify option conflicts for "features"
* libmultipath: merge_hwe: fix queue_if_no_path logic
* libmultipath: assemble_map: fix queue_if_no_path logic
* multipath.conf.5: document no_path_retry vs. queue_if_no_path
* multipath.conf.5: Remove ??? and other minor fixes
* libmultipath: add deprecated warning for some features settings
- _service: Use "sles12-sp3" branch as revision, as factory
and SLE12-SP3 submissions are in sync. Will be changed when
factory forks off (latest at SLE12-SP3 GA).
-------------------------------------------------------------------
Tue Jun 20 06:57:53 UTC 2017 - bwiedemann@suse.com
- set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages
to fix build-compare (bsc#1045111)
-------------------------------------------------------------------
Wed Jun 14 08:58:23 UTC 2017 - mwilck@suse.com
- Update to version 0.7.1+53+suse.07c2f6ac
- kpartx patch series from upstream (bsc#1037533, bsc#1033541)
* kpartx: only check for 'no_partitions' feature on dm devices
* kpartx: test-kpartx: new unit test program
* kpartx: remove is_loop_device
* kpartx: relax and improve UUID check in dm_compare_uuid
* kpartx: dm_remove_partmaps: support non-dm devices
* kpartx: dm_devn: return error for non-existent device
* kpartx: don't treat multi-linear mappings as partitions
* libmultipath: don't treat multi-linear mappings as partitions
* kpartx: use partition UUID for non-DM devices
* kpartx: use absolute path for regular files
* kpartx: find_loop_by_file: use sysfs
* kpartx: include sys/sysmacros.h
* Revert "kpartx: relax check when checking for a kpartx device"
- Spec file: use new build flag for libdmmp installation
(bsc#1036652), enabled by upstream fix:
* libdmmp: enable library installation in alternative directory
- Other bug fixes from upstream:
* libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865)
* multipath-tools: fix compilation with gcc < 4.9
* kpartx: fix device checks
* mpath_persist: Don't join threads that don't exist
* libmultipath: fix suspended devs from failed reloads
* mpathpersist: fix one more crash possiblity
- Minor upstream changes:
* multipath: Merge the DELL MD3xxx device configs
* multipath: fix up position independent code
* libmultipath: fix partition detection (bsc#1037533)
* kpartx: default to running in sync mode
* libmultipath: force udev reloads
* libmultipath: print alias with no_path_retry message
* multipathd: force reload device on all resizes
* libmultipath: refactor calls to get dm device info
* multipath-tools: document uid_attribute for NVME devices
* Makefile: Remove assignments to unused variables
* libmultipath/configure.h: Add a forward declaration
* libmpathpersist: Add two missing #include directives
* Remove mpath_reverse_8bytes_order()
* Move the declaration of mpath_mx_alloc_len to a header file
* Remove a superfluous "extern" keyword
* mpathpersist.8: add missing documentation for -K, -C, -l
---------------------------------------------------------------------
Thu Apr 27 18:15:26 UTC 2017 - mwilck@suse.com
- spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271)
- spec file: Move libdmmp to /usr/lib[64] (bsc#1036652)
- Update to version 0.7.1+7+suse.3edc5f7d:
* kpartx: use mapname if no uuid is present (bsc#1033541)
* kpartx: relax check when checking for a kpartx device (bsc#1033541)
* libmpathpersist: use extern struct udev (bsc#1027188)
* kpartx: include sys/sysmacros.h (fix compilation warning)
- Update to upstream version 0.7.1:
* multipath-tools: improve processing efficiency for addition and deletion of multipath devices
* uevent_can_discard: optimize devpath check
* multipathd: fix SIGUSR2 handling
* multipath-tools: clean up libdmmp/Makefile
* multipath-tools: libdmmp: Fix incorrect use of __attribute__
* multipath-tools: Remove trailing whitespaces
* multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile
* multipath-tools: build objects for libdmmp and libmpathpersist independently
* libdmmp: minor Makefile cleanup
* multipath-tools: remove incdir from Makefiles
* libdmmp: don't disconnect from multipathd twice
* multipathd: don't call strlen on NULL variables
* libdmmp: move libdmmp.pc install location
* multipathd: drop lock before calling uev_add_path
* multipathd: allow devices to switch from RW to RO
* libmultipath: don't set max_sectors_kb on reloads
* Remove a trailing tab
* multipath: fix segfault with disable_changed_wwids
* multipath-tools: amend text from multipath/multipath.conf.5
* Bump the version code and date
* multipath-tools: replace multipath configuration output
* Revert "multipathd: set timeout for CLI commands correctly"
* libmultipath: fix skip_kpartx support for removing maps
* Bump version to 0.7.1
-------------------------------------------------------------------
Fri Mar 24 09:59:17 UTC 2017 - mwilck@suse.com
- spec file changes suggested by factory review team (bsc#1030699)
* RPM group adjustments.
* Avoid %__ macro indirections
-------------------------------------------------------------------
Thu Mar 23 13:23:01 UTC 2017 - mwilck@suse.com
- Enable rados for SLES only for x86_64 and aarch64 (ceph is currently
disabled on SLES on s390x and ppc64le) (bsc#1030699)
- Downgrade to version 0.6.4+103+suse.bcb5d0f4:
* temporarily remove commit "multipathd: fix SIGUSR2 handling"
until it's merged in official repo (bsc#1030699)
-------------------------------------------------------------------
Tue Mar 21 11:49:06 UTC 2017 - mwilck@suse.com
- Spec file: disable librados for architectures for which ceph
is not built
- Spec file: enable librados by default for SLES12 SP3, disable
it on Leap <= 42.1
- Update to version 0.6.4+104+suse.ac0df678:
* multipathd: fix SIGUSR2 handling
-------------------------------------------------------------------
Fri Mar 10 13:04:05 UTC 2017 - mwilck@suse.com
- Update to version 0.6.4+103+suse.bcb5d0f4:
* changed to official github repo openSUSE/multipath-tools
(no changes code-wise)
-------------------------------------------------------------------
Fri Mar 10 11:23:40 UTC 2017 - mwilck@suse.com
- Spec file: Added dependency on sg3_utils (boo#1028857)
-------------------------------------------------------------------
Wed Mar 01 15:43:09 UTC 2017 - mwilck@suse.com
- spec file changes: optional librados and libdmmp support
* enabled by default on Factory and Leap
(disable with --without-rados, --without-libdmmp)
* disabled by default on SLES12
(enable with --with-rados, --with-libdmmp)
* libdmmp0_1_0 and libdmmp-devel as separate packages
* minor fixes for RPMLINT warnings
- Update to version 0.6.4+102.0119472d:
* rebased, code-wise identical to previous checkout
-------------------------------------------------------------------
Tue Feb 28 11:26:01 UTC 2017 - mwilck@suse.com
- Update to version 0.6.4+102.df7d367e:
* libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays
(bsc#1004858)
-------------------------------------------------------------------
Tue Feb 28 10:29:31 UTC 2017 - mwilck@suse.com
- Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream):
* Make libdmmp build optional
* multipath.rules: use -i flag to multipath
* kpartx: create symlinks for dmraid devices
* kpartx: Add udev compability rules for SUSE
* libmultipath/checkers: make RADOS checker optional
* multipathd: fixup check for new path states (bsc#1019798)
* tur: Add pthread_testcancel() (bsc#101979)
* kpartx: sanitize delete partitions (bsc#100869)
* libmultipath: coalesce_paths: trigger uevent if nothing done
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: reload map if not known to udev
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: sysfs_attr_set_value: use const char*
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: select_action: check special features separately
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: disassemble_map: treat aminio like assemble_map does
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: disassemble_map: skip no_path_retry check
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: setup_feature: handle "retain_attached_hw_handler"
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: setup_feature: print log msg if no_path_retry cant be set
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* libmultipath: setup_features: log msg if queue_if_no_path is ignored
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* multipathd: use weaker "force_reload" at startup
(bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
* multipathd: imply -n if find_multipaths is set (bsc#1012910)
* multipath: ignore -i if find_multipaths is set (bsc#1012910)
* libmultipath: move suspend logic to _dm_flush_map (bsc#986838)
* multipath -ll: set DI_SERIAL (bsc#991432)
* libmultipath: use existing alias from bindings file (bsc#1005255)
* libmultipath/discovery: do not cache 'access_state' sysfs attribute (bsc#1004858)
* multipathd: issue systemd READY after initial configuration (bsc#1006469)
* multipath: avoid crash when using modified configuration (bsc#1000914)
* multipathd: Set CLI timeout correctly (bsc#999061)
* libmultipath: Do not crash on empty features (bsc#994812)
* libmultipath: fall back to search paths by devt (bsc#995645)
* multipathd: set timeout for CLI commands correctly (bsc#999061)
* Invalid error code when using multipathd CLI
* multipath: do not check daemon from udev rules (bsc#986734)
* Add support for "multipath=off" and "nompath" on kernel cmdline
* multipathd: start daemon after udev trigger (bsc#98673)
* multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734)
- Update to current upstream (0.6.4-65-ga2675025)
* Avoid that reloading a map sporadically triggers I/O errors
* fix udev rules for failed multipath devices
* multipathd: allow resetting stats
* multipathd: add messages on delayed path addition
* multipathd: don't update priority of failed paths
* libmultipath: cleanup orphan device states
* libmultipath: add detect_checker option
* kpartx: don't keep creating recursive partitions
* multipath-tools: Introducing multipath C API
* multipath-tools: sync valgrind.h with 3.12 upstream
* multipath-tools: add availability of service-time and queue-length to multipath.conf.5
* multipath-tools: add availability of service-time and queue-length to multipath.conf.5
* Fill NVMe specific path info
* Don't blacklist nvme
* multipath-tools: fix misspellings
* multipath-tools: git should ignore rej and orig files
* Include sys/sysmacros.h
* Tolerate modprobe failures in multipathd.service
* multipath-tools: Remove trailing and leading whitespaces
* multipath-tools: Perform socket client uid check on IPC commands.
* multipath-tools: Set errno mpath_recv_reply() when failure
* multipath-tools: New way to limit the IPC command length.
* multipath-tools: libmultipath: Removed unused functions.
* multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb.
* multipath-tools: multipathd: Fix memory leak on load_config().
* [multipathd] Remove trailing whitespaces
* multipathd: deterministic io throughput in multipath
-------------------------------------------------------------------
Sat Feb 18 22:04:25 UTC 2017 - kukuk@suse.com
- Remove superfluous PreReq for insserv and fillup
-------------------------------------------------------------------
Thu Sep 29 06:04:00 UTC 2016 - mwilck@suse.com
- Update to version 0.6.2+suse20160928.8939fb6
-------------------------------------------------------------------
Thu Sep 29 08:03:04 CEST 2016 - hare@suse.de
- Implement support for 'multipath=off' and 'nompath'
kernel commandline options (bsc#1001691)
-------------------------------------------------------------------
Wed Sep 28 13:26:55 CEST 2016 - hare@suse.de
- multipath: avoid crash when using modified configuration
(bsc#1000914)
-------------------------------------------------------------------
Mon Sep 19 10:55:20 CEST 2016 - hare@suse.de
- libmultipath: Do not crash on empty features (bsc#994812)
- multipathd: Set CLI timeout correctly (bsc#999061)
- Moved multipath-tools repository to
github.com:/openSUSE/multipath-tools.git
-------------------------------------------------------------------
Thu Sep 8 14:23:16 CEST 2016 - hare@suse.de
- Fixup glitch from patch 'fixup check from udev rules' (bsc#986734)
- Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch;
integrated into git repository
-------------------------------------------------------------------
Mon Aug 29 10:32:36 UTC 2016 - jthumshirn@suse.com
- libmultipath: fall back to search paths by devt (bsc#995645)
-------------------------------------------------------------------
Fri Aug 26 18:52:03 CEST 2016 - hare@suse.de
- Fixup module name in /usr/lib/modules-load.d (bsc#986734)
-------------------------------------------------------------------
Fri Aug 26 09:10:50 CEST 2016 - hare@suse.de
- multipath: fixup check from udev rules (bsc#986734)
-------------------------------------------------------------------
Wed Aug 24 12:58:32 CEST 2016 - hare@suse.de
- multipathd: start daemon after udev trigger (bsc#986734)
- Load device handler and multipath module at boot (bsc#991634)
-------------------------------------------------------------------
Fri Aug 19 15:28:48 CEST 2016 - hare@suse.de
- Do not check daemon from udev rules (bsc#986734,bsc#990538)
-------------------------------------------------------------------
Fri Aug 5 09:02:21 CEST 2016 - hare@suse.de
- Include fixes from upstream:
* memory leak in orphan_paths
* More hardware table cleanups
* Add 'serial' keyword to weightedpath prioritizer
- Set timeout for CLI commands correctly (bsc#990265)
- Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538)
- multipathd.service: Fixup Wants= and Before= statements
(bsc#991742, bsc#986734)
-------------------------------------------------------------------
Thu Jul 28 15:57:12 CEST 2016 - hare@suse.de
- Include patches from upstream:
* Cleanup hardware tables by removing default entries
* More formatting fixes
* Order keywords in multipath.conf.5
* Change default pgpolicy from 'failover' to 'group_by_prio'
* kpartx: Fix check whether to detach a loop device
* Fix partly traversed loop in coalesce_paths()
* Fix memory leak in reconfigure()
* Cleanup include header files
* Bump version code to 0.6.2
- Fix multipath -l <devmap> without output (bsc#990480)
- Fix spelling in a log message
- Fix type of rcu_unregister()
- Do not perform POSIX mutex operations inside a signal handler
- Ensure that signals are delivered to the uxsock thread
- Fix memory leak in path group policies
- Update tarball to 0.6.2+suse20160728.d96f423
-------------------------------------------------------------------
Fri Jul 15 10:46:34 CEST 2016 - hare@suse.de
- Include patches from upstream:
* Makefile cleanup
* Update multipath.conf.5
* Update hardware tables
* Whitespace cleanup
- Fixup crash during shutdown (bsc#988539)
- Update tarball to 0.6.1+suse20160715.3d44636
-------------------------------------------------------------------
Mon Jul 4 22:30:43 UTC 2016 - jengelh@inai.de
- Remove obsoletes spec sections
-------------------------------------------------------------------
Mon Jul 4 09:47:21 CEST 2016 - hare@suse.de
- Move config accesses to use user-space RCU (bsc#987526)
* Revert 'move filter_devnode under vector lock'
* Revert the rework patch
- Include patches from upstream:
* Update hardware tables
* Update kpartx manpage
* Whitespace fixes
* Include coverity fixes
* Drop AUTHOR file
- Update tarball to 0.6.1+suse20160704.6e52398
-------------------------------------------------------------------
Wed Jun 8 08:33:48 UTC 2016 - lnussel@suse.de
- fix service file to not pretend that this is the upstream version.
Now labeled 0.6.1+suse20160603.9b920e3
- Fix BuildRequire to get systemd.pc from correct package (bsc#983167)
- point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning
-------------------------------------------------------------------
Fri Jun 3 08:58:52 CEST 2016 - hare@suse.de
- Rework patch 'move filter_devnode under vector lock'
(bsc#982348)
-------------------------------------------------------------------
Mon May 30 08:52:53 CEST 2016 - hare@suse.de
- multipathd: Fixup definition of set_unlocked_handler_callback()
- mpathcmd.h: Update Free Software Foundation address
-------------------------------------------------------------------
Fri May 27 10:02:28 CEST 2016 - hare@suse.de
- Do not install header file with mode 755
-------------------------------------------------------------------
Wed May 25 17:20:32 CEST 2016 - hare@suse.de
- Update to latest upstream version 0.6.1
* Merge suse-specific patches
* Drop multipath.conf.* files
* Update to version 0.6.1
* multipathd: move 'filter_devnode' under vector lock
* libmultipath: use poll() in uevent_listen()
* Increase kpartx retries
* Merge Dell MD3XXX hardware table entries
* multipathd: Add 'sysfs' prioritizer (bsc#927040)
* libmultipath: call get_vpd_uid() if no uid_attribute is set
* multipathd: update defaults
-------------------------------------------------------------------
Fri May 6 15:18:22 CEST 2016 - hare@suse.de
- Update to latest upstream version 0.6.0 (FATE#319406)
* Update documentation
* Fix memory leak and segfault in reconfigure
* Add wwn keyword to weightedpath prioritizer
* Use 64-bit int for command key
* check partions unused before removing
* print 'fail' when remove fails
* add exclusive_pref_bi for alua prioritizer
* kpartx: verify parition devices
* multipathd: delay reloads during creation
* Cut down alua prioritizer ioctls
* Add 'ignore_new_boot_devs' option
* Add libmpathcmd library and use it internally
* retrigger uevents to try and grab uid
* Update to version 0.6.0
-------------------------------------------------------------------
Fri Apr 15 12:45:41 CEST 2016 - hare@suse.de
- Port to latest upstream version (FATE#319406, FATE#320255)
* kpartx: support device names with spaces
* add raw format multipathd commands
* make kpartx -d remove all partitions
* Add find_multipaths option
* Autodetect ALUA CLARiiON configurations
* Delayed path reintegration
* enable configuration directory
* read-only bindings
* Add deferred_remove support
* correctly set partition delimiter on rename
* Add overrides section to multipath.conf
* Add additional path wildcards
* Add force_sync option
* Misc small patches
-------------------------------------------------------------------
Thu Mar 24 09:49:45 CET 2016 - hare@suse.de
- multipathd: do not flush maps on startup
- Use find_path_by_dev() where possible (bsc#924316)
- Fixup error return in store_path() (bsc#972329)
- Do not display message 'invalid fd'
-------------------------------------------------------------------
Tue Mar 8 10:57:07 CET 2016 - hare@suse.de
- Fixup overzealous warning 'empty device number' (bsc#969857)
-------------------------------------------------------------------
Wed Feb 17 15:53:26 CET 2016 - hare@suse.de
- multipathd: fixup signal handling (again)
- Revert 'trigger all devices on startup'
- multipathd: print error message for invalid arguments
- multipathd: block checkerloop during reconfiguration (bsc#946658)
- libmultipath: correctly initialize pp->sg_id
- multipathd: don't buffer output with systemd (bsc#954726)
- multipath.rules: Do not forward partition events (bsc#954726)
- libmultipath: improve uxlsnr handling (bsc#954726)
- multipathd: do not realloc memory in uxlsnr (bsc#954726)
- libmultipath: call get_uid() for all paths (bsc#935312)
- multipathd: Do not print misleading message 'not found in pathvec'
- multipathd: Do not update the paths vec when removing paths
- multipathd: Do not switch paths on empty multipath tables (bsc#956349)
- libmultipath: remove 'get_info' argument for adopt_paths()
- libmultipath: ensure 'dev_t' is set when store paths (bsc#924316)
- libmultipath: Do not store paths with empty dev_t (bsc#924316)
- libmultipath: Do not store paths with empty device name (bsc#924316)
- libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588)
- Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845)
- multipath: Reset alias if renaming fails (bsc#943157)
-------------------------------------------------------------------
Fri Nov 6 13:35:22 CET 2015 - hare@suse.de
- Fixes for md_monitor on zFCP (FATE#319070):
* strict loop timings
* multipathd: fixup a crash when invoking CLI commands
* multipathd: implement 'show map $map format $format
-------------------------------------------------------------------
Tue Aug 25 11:58:21 CEST 2015 - hare@suse.de
- Fixup hang in 'multipath -f' (bsc#941954)
-------------------------------------------------------------------
Mon Aug 3 11:48:54 CEST 2015 - hare@suse.de
- Create package for SLE12-SP1.
* Remove multipath-tools-0.5.0-sles12.diff.bz2
* Add multipath-tools-0.5.0-sles12-sp1.diff.bz2
- kpartx: parse emulated DASD devices
- multipathd: Fixup queueing mode in 'show maps status' (bsc#933885)
- multipathd: Accept zero-sized paths in ev_add_path
- Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282)
- libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282)
- libmultipath: correctly display checker status
-------------------------------------------------------------------
Wed Apr 8 11:00:43 CEST 2015 - hare@suse.de
- Remove 'udev_sync' argument from dm_simplecmd (bsc#903001)
- Ensure multipathd is started before systemd-udev-trigger
-------------------------------------------------------------------
Tue Apr 7 10:18:24 CEST 2015 - hare@suse.de
- Only import ID_FS_XXX variables if not set (bsc#909358)
- Fixup regular expression for HP MSA 2040 (bsc#920189)
-------------------------------------------------------------------
Wed Mar 18 12:53:32 CET 2015 - hare@suse.de
- Add dependency on systemd-udevd.service (bsc#903001)
- Use ALUA for HP 3PAR (bsc#922105)
- Add DX8700 S3 and DX8900 S3 defaults (bsc#921703)
- Load all device handler modules on startup (bsc#908529)
-------------------------------------------------------------------
Fri Mar 13 13:59:19 CET 2015 - hare@suse.de
- libmultipath: make vpd page 0x80 optional (bsc#917963)
- Add HP MSA 2040 to the hardware table (bsc#920189)
- Revert 'Skip unhandled device types' (bsc#917701)
-------------------------------------------------------------------
Thu Jan 29 13:02:08 CET 2015 - hare@suse.de
- skip uninitialized devices during reconfiguration (bnc#908915)
- memory overflow when printing help text (bnc#909742)
-------------------------------------------------------------------
Tue Dec 16 11:54:47 CET 2014 - hare@suse.de
- Do not automatically fall back to vpd uid generation
- Improve vpd parsing
- multipathd: trigger all devices on startup (bnc#901465)
- Unset 'uid_attribute' on failure
-------------------------------------------------------------------
Wed Dec 10 09:43:29 CET 2014 - hare@suse.de
- libmultipath: Fall back to SG_IO if no UID could be assigned
(bnc#908915)
- Assign local priority for NAA VPD descriptor (bnc#907483)
- libmultipath: finally fix dev_loss_tmo setting (bnc#889927)
- libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927)
- devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809)
- kpartx: handle more than 256 loop devices (bnc#898427)
- multipathd: fixup locking in uev_remove_map() (bnc#901891)
- multipathd: use global variable for uxsock timeout (bnc#900758)
- multipathd: remove unused variable in cli_reconfigure()
- Add %service calls for multipathd.socket
-------------------------------------------------------------------
Mon Sep 22 11:02:53 CEST 2014 - hare@suse.de
- Really fix segfault in recv_packet (bnc#896678)
- Allow empty revision during discovery (bnc#896864)
-------------------------------------------------------------------
Wed Sep 17 14:04:47 CEST 2014 - hare@suse.de
- Fix segfault in recv_packet (bnc#896678)
-------------------------------------------------------------------
Wed Sep 3 12:23:01 CEST 2014 - hare@suse.de
- Fixup segfault due to double unlock
- Skip USB devices during discovery (bnc#865577)
- Ignore devices when sysfs_get_tgt_nodename fails (bnc#865577)
- Use sysfs attribute vpd_pg80 to read serial number
-------------------------------------------------------------------
Wed Sep 3 08:27:29 CEST 2014 - hare@suse.de
- Create rcmultipathd links (bnc#894513)
- multipathd: fix segfault in checkerloop() (bnc#894513)
- Use regenerate_posttrans rpm macros (bnc#892181)
-------------------------------------------------------------------
Tue Sep 2 16:51:23 UTC 2014 - trenn@suse.de
- Do not call mkinitrd in rpm macros directly, make use of
%{?regenerate_initrd_posttrans} and %{?regenerate_initrd_post}
instead to avoid rebuilding of initrd for each package that
needs initrd recreation. Only update initrd once per install/update
if needed
-------------------------------------------------------------------
Fri Aug 29 12:00:49 CEST 2014 - hare@suse.de
- Fixup segfault during uev_path_add() (bnc#892214)
-------------------------------------------------------------------
Thu Aug 21 12:16:53 CEST 2014 - hare@suse.de
- Revert to ACT_RELOAD in domap() if the map exists
- multipathd: asynchronous configuration (bnc#891189)
- multipathd: timeout CLI commands when waiting for lock
(bnc#891189)
- Remove dm_udev_XXX wrapper functions
- uxlsnr: use typedef for trigger function
- multipathd: lock cli client list
- multipathd: Use standard lists for CLI handling
-------------------------------------------------------------------
Tue Aug 19 12:33:19 CEST 2014 - hare@suse.de
- Use strlen() when checking for valid wwid
- kpartx: zero out cookie (bnc#890902)
- multipathd: Check for empty wwid when processing events
(bnc#892214)
-------------------------------------------------------------------
Mon Aug 18 16:24:05 CEST 2014 - hare@suse.de
- Fixup device-mapper cookie handling yet again (bnc#890902)
- Allow zero-sized devices during configuration
- multipathd: issue warning on CLI command timeout (bnc#891189)
-------------------------------------------------------------------
Wed Aug 13 20:04:34 CEST 2014 - hare@suse.de
- Do not remove paths without uevent (bnc#890998)
-------------------------------------------------------------------
Tue Aug 12 10:47:21 CEST 2014 - hare@suse.de
- Fixup structure misalignment in config.h (bnc#890747)
- Do not print empty multipaths section
- Fixup 'uxsock_timeout' handling
- Reload map if reinstate failed (bnc#890854)
-------------------------------------------------------------------
Mon Aug 11 17:03:25 CEST 2014 - hare@suse.de
- Close memory leak in print_multipath_topology
- Implement 'uxsock_timeout' keyword (bnc#890551)
- Return error when receiving CLI packet (bnc#890551)
- multipath: do not print state 'orphan' for option '-l' (bnc#890551)
- Fix race conditions during uevent processing (bnc#890994)
-------------------------------------------------------------------
Tue Aug 5 12:34:04 CEST 2014 - hare@suse.de
- Skip unhandled device types (bnc#881125)
- use 'uid_attribute' per default when generating WWID (bnc#881125)
- Use a default dev_loss_tmo of 600 (bnc#889927)
- Fixup device-mapper 'cookie' handling (bnc#886743)
- Remove last argument from verify_paths()
- Add paths with a size of '0' as 'ghost' paths
- Remove sysfs_get_dev()
- Use glibc 'major' and 'minor' macros
- Whitespace cleanup in mpath_persist
-------------------------------------------------------------------
Mon Jul 28 10:18:43 CEST 2014 - hare@suse.de
- Fixup wrong check for errno in uevent_listen()
(bnc#889165)
- Terminate uevent listener on ppoll() error (bnc#889165)
-------------------------------------------------------------------
Fri Jul 25 10:53:27 CEST 2014 - hare@suse.de
- Patches from upstream:
* enable gcc format-security check
* Accept "*" as a valid regular expression
* check info.exists to get valid value
* Don't forget to reload table when both reload and rename
is required
* libmultipath: Simplify read_line()
* libmultipath: Zero-terminate sysfs_attr_get_value() result
* libmultipath: Print line number for which parsing failed
* libmultipath: Accept "*" as a valid regular expression
* multipath: Wrong sysfs attribute used for iSCSI settings
(bnc#883808)
- Check for valid DM_DEVICE_INFO before proceeding
(bnc#888453)
- Scalability fixes (bnc#880356):
* Separate out uevent parsing functions
* Use poll() when receiving uevents
* multipathd: push down lock in checkerloop()
* Allow specific CLI commands to run unlocked
* Push down vector lock during uevent processing
-------------------------------------------------------------------
Wed Jul 23 12:35:44 CEST 2014 - hare@suse.de
- recovery_tmo for iSCSI sessions not updated (bnc#883808)
- Only filter for udev property if uid_attribute is present
- Read wwid from sysfs vpg_pg83 attribute
- Update multipath.conf.5 to clarify wwid generation
- kpartx: Fixup persistent name generation (bnc#887582)
- Revert 'return PATH_DOWN for quiesced paths'
- Do not treat 'transport-offline' paths as 'offline' (bnc#888378)
-------------------------------------------------------------------
Wed Jul 9 11:46:23 CEST 2014 - hare@suse.de
- multipath: Check for running daemon when called with '-u'
(bnc#886154)
-------------------------------------------------------------------
Fri Jul 4 09:14:11 CEST 2014 - hare@suse.de
- multipath: use option '-i' when called from udev (bnc#885628)
- multipath: add option '-i' to ignore wwids file (bnc#885628)
- Update hwtable for EMC XtremIO (bnc#880510)
- Remove unused variable 'aas' from alua prioritzer
- Patches from upstream:
* Add multipath.conf force_sync option
* make prioritizers use checker_timeout, if set
* Improve multipath.conf syntax checking
* orphan paths on failed add
* Add missing interactive commands to multipathd man page
* Make multipathd orphan paths that were removed externally
* allow users to add wwids to /etc/multipath/wwids with -a
* change conf->dry_run to conf->cmd
* Return the correct size buffer in set_value()
* Fix memory issues in path reordering failure code paths
-------------------------------------------------------------------
Tue Jun 24 09:45:57 CEST 2014 - hare@suse.de
- Fixup race condition with udev (bnc#883878)
- Cleanup foreground operation handling in multipathd
- Fix some minor issues in path reordering code (bnc#870465)
- Patches from upstream:
* Use existing user friendly names if possible
* kpartx: fix extended partition size for >512b sectors
* Mismatch between allocation length and transfer length in
rdac prio
* Mismatch between allocation length and transfer length in
emc_clariion prio.
-------------------------------------------------------------------
Fri Jun 13 10:51:48 CEST 2014 - hare@suse.de
- 11-dm-mpath.rules: Import blkid values if all paths are down
(bnc#875233)
- kpartx.rules: Skip kpartx for multipath events (bnc#875233)
-------------------------------------------------------------------
Tue May 20 12:36:57 CEST 2014 - hare@suse.de
- Fix race condition with systemd (bnc#878809)
-------------------------------------------------------------------
Fri May 16 10:26:03 CEST 2014 - hare@suse.de
- Fix segfault when fast_io_fail_tmo is empty in config file
- Crafted ordering of child paths for round robin path selector
(bnc#870465)
- multipath: enable sync support (bnc#872297)
- Whitelist devices in multipath.rules (bnc#877281)
-------------------------------------------------------------------
Fri Apr 11 12:23:29 CEST 2014 - hare@suse.de
- Install multipath rule under 56-multipath.rules (bnc#873151)
- Implement option '-u' for uevents (bnc#873151)
- Remove trailing linefeed from sysfs attributes
- Make checker_put() and prio_put() idempotent
- Implement 'list path' CLI command
- Disable reassign maps per default
- Allow for NULL path when printing information
- Fixup wwid blacklist printing
- Use SCSI_IDENT_.* as the default property whitelist (bnc#872929)
- Do not call 'blkid' in kpartx.rules
- Allow empty wwids during discovery (bnc#872712)
- Always set verbosity to '0' when checking devices (bnc#867840)
- Fixup multipath rules for booting (bnc#870764)
- Fixup dependencies in multipathd.service (bnc#872712)
- Do not print empty device strings during discovery (bnc#872712)
- Use multipath wwid if path wwid is empty (bnc#872712)
- Set the correct PID when running in debug mode
-------------------------------------------------------------------
Fri Mar 21 12:28:10 CET 2014 - hare@suse.de
- Fixup ordering cycle with systemd (bnc#863218)
- Rebase git repository to match with upstream
- Revert 'display uevent sequence number'; not required anymore
-------------------------------------------------------------------
Thu Mar 13 00:56:11 CET 2014 - ro@suse.de
- downgrade device-mapper requirement to 1.2.78 until 1.2.82
is available anywhere
-------------------------------------------------------------------
Wed Mar 12 16:36:56 CET 2014 - hare@suse.de
- Update FSF address
- Add 11-dm-mpath.rules (bnc#867968)
- Link against libsystemd instead of libsystemd-daemon
-------------------------------------------------------------------
Fri Feb 28 15:53:24 CET 2014 - hare@suse.de
- Fixup spec file to correct rules permissions
-------------------------------------------------------------------
Fri Feb 28 12:45:19 CET 2014 - hare@suse.de
- Fixup 40-multipath.rules installation
-------------------------------------------------------------------
Wed Feb 26 14:38:49 CET 2014 - hare@suse.de
- Add 40-multipath.rules for dracut support
-------------------------------------------------------------------
Fri Feb 14 14:55:28 CET 2014 - hare@suse.de
- Install kpartx rules with correct prefix for dracut
- filter for missing property in get_refwwid() (bnc#862250)
- Double uevent stacksize yet again (bnc#855379)
- do not fail discovery on individual devices (bnc#860850)
- Prefer deprecated 'getuid' callout (bnc#861534)
- Skip paths with empty wwid (bnc#861534)
- correctly terminate string in strlcpy() (bnc#861534)
- Don't chop const strings
- Fixup typo in Makefile
- display uevent sequence number on 'show daemon'
-------------------------------------------------------------------
Tue Jan 21 16:32:33 CET 2014 - hare@suse.de
- Fixup build issues
-------------------------------------------------------------------
Tue Jan 21 13:58:15 CET 2014 - hare@suse.de
- Update to official version 0.5.0
- remove: multipath-tools-0.4.9.tar.bz2
- remove: multipath-tools-0.4.9-opensuse-12.3.diff.bz2
- add: multipath-tools-0.5.0.tar.bz2
- add: multipath-tools-0.5.0-sles12.diff.bz2
- Merge:
- multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch
-------------------------------------------------------------------
Tue Apr 16 10:08:18 UTC 2013 - idonmez@suse.com
- Add Source URL, see https://en.opensuse.org/SourceUrls
- use %setup -c to support the tarball
-------------------------------------------------------------------
Fri Feb 15 13:55:24 UTC 2013 - cfarrell@suse.com
- license update: GPL-2.0
Substantial number of GPL-2.0 files in the package
-------------------------------------------------------------------
Fri Feb 15 12:15:09 UTC 2013 - rmilasan@suse.com
- Make installation of systemd unit and udev files more flexible.
add: multipath-tools-make-flexible-install-of-systemd-and-udev-files.patch
-------------------------------------------------------------------
Fri Feb 1 10:29:11 CET 2013 - hare@suse.de
- Update to latest mainline git version
- Merge systemd fixes
- Generate persistent device names for kpartx (bnc#799274)
-------------------------------------------------------------------
Sun Aug 26 02:05:37 UTC 2012 - crrodriguez@opensuse.org
- Systemd: use default service type instead of forking
- Systemd: fix spec pre/post scripts.
-------------------------------------------------------------------
Tue Jul 17 13:21:47 UTC 2012 - rmilasan@suse.com
- Drop patch 0001-multipath.rules.patch, multipath not ready yet.
-------------------------------------------------------------------
Tue Jul 17 12:43:43 UTC 2012 - rmilasan@suse.com
- Fix the installation of multipath.rules file.
-------------------------------------------------------------------
Mon Jun 11 12:58:05 UTC 2012 - rmilasan@suse.com
- Drop RUN+="socket:..." and update the multipath.rule like Fedora
does.
-------------------------------------------------------------------
Wed May 30 17:32:10 CEST 2012 - hare@suse.de
- Update to version 0.4.9
- Merge in latest changes from mainline
-------------------------------------------------------------------
Fri Apr 20 08:35:06 UTC 2012 - rmilasan@suse.com
- Run update of initrd at %post and %postun.
We need this to make sure initrd reflects the updates.
-------------------------------------------------------------------
Fri Sep 30 15:40:21 UTC 2011 - uli@suse.com
- cross-build fix: use %__cc macro
-------------------------------------------------------------------
Fri May 27 09:34:36 UTC 2011 - lnussel@suse.de
- don't hard require boot.device-mapper in boot.multipath. dm-mod is
autoloaded when accessing /dev/mapper/control anyways.
-------------------------------------------------------------------
Mon Apr 4 16:40:14 UTC 2011 - crrodriguez@opensuse.org
- fix build fail with AS_NEEDED by default
-------------------------------------------------------------------
Fri Nov 26 10:18:45 CET 2010 - meissner@suse.de
- updated one more dm_simplecmd caller with &cookie.
- bumped 1 character buffer to 1 byte more for leading \0
-------------------------------------------------------------------
Tue Jul 6 16:17:27 CEST 2010 - hare@suse.de
- Merge with fixes from mainline.
-------------------------------------------------------------------
Wed Jun 30 16:19:00 UTC 2010 - jengelh@medozas.de
- fix compilation on bi-arch by specifying LIB=%_lib
(Makefiles would erroneously assume a 64-bit target just by the
sheer presence of lib64, which is wrong)
- always add in -D_GNU_SOURCE to get at struct ucred
-------------------------------------------------------------------
Wed Jun 23 15:09:46 CEST 2010 - hare@suse.de
- Increase initial timeout for 'tur' checker (bnc#616694)
-------------------------------------------------------------------
Fri Jun 18 13:19:13 CEST 2010 - hare@suse.de
- Set geometry information for multipath maps (bnc#613363)
- Reset 'running' parameter for directio (bnc#600043)
- Add fallback to init script for older versions (bnc#602957)
-------------------------------------------------------------------
Fri Jun 4 12:18:02 CEST 2010 - hare@suse.de
- Add HP 2000 to internal hardware table (bnc#603359)
- Make path state messages unique
- Add 'reassign_maps' configuration parameter
- Profiling fixes:
* Update 'max_fds' handling
* Use strcmp() instead of strcmp_chomp()
* Simplify sysfs_get_device()
* Remove duplicate calls to path_offline()
* Simplify dm_get_name()
* Fixup devt2devname()
* Rework dm_reassign()
- check argument length in execute_program(bnc#610914)
- Do not use LOG_CONS when opening syslog (bnc#610914)
- Remove pid file usage from init scripts (bnc#600412)
- Fixup boot.multipath init script (bnc#600412)
-------------------------------------------------------------------
Wed May 12 08:08:47 CEST 2010 - hare@suse.de
- Always provide symlinks for udev (bnc#603785)
-------------------------------------------------------------------
Thu May 6 14:02:11 CEST 2010 - hare@suse.de
- Use minor number in ev_remove_map() (bnc#599770)
- signal_waiter() overwrites structure (bnc#591399)
- Serialize startup on large machines (bnc#598697)
- Update multipath(8) manpage for '-p' (bnc#602970)
- Mark 'readsector0' checker as deprecated (bnc#589340)
-------------------------------------------------------------------
Mon Apr 26 13:33:30 CEST 2010 - hare@suse.de
- Errorneous message 'error starting uevent listener'
- Graceful shutdown of logging thread (bnc#591399)
-------------------------------------------------------------------
Mon Apr 26 12:02:32 CEST 2010 - hare@suse.de
- Missing '-p' option for mkdir in mkinitrd script (bnc#597786)
- rdac message not printed correctly (bnc#598302)
- Use alias when printing log messages (bnc#598302)
- valgrind fixes (bnc#591399)
- Use VECTOR_SIZE() defines
- Update hwtable factorization
- Use log_close() on shutdown
- Use refcounting for checkers (bnc#591399)
- More valgrind fixes
-------------------------------------------------------------------
Tue Apr 20 13:41:07 CEST 2010 - hare@suse.de
- Provide correct persistent symlinks for user_friendly_names
(bnc#596301)
- Fixup hardware table for LSI arrays (bnc#597713)
- Reassign maps during startup (bnc#586834)
- Update manpage
-------------------------------------------------------------------
Tue Apr 20 12:51:53 CEST 2010 - mmarek@suse.cz
- Use mkdir -p in mkinitrd setup script (bnc#597786).
-------------------------------------------------------------------
Fri Apr 9 15:30:55 CEST 2010 - hare@suse.de
- Remove 'minor' argument from add_map_without_path
- Check for correct device-mapper device in uevent handler
- Start uevent service handler from main thread
- Do not reassign multipath maps (bnc#594341)
- Protect waiter structure by mutex (bnc#581200)
- Log directly to syslog on shutdown (bnc#581200)
- Clear up uevent queue on shutdown
- Add more IBM/FAStT arrays (bnc#578738)
-------------------------------------------------------------------
Mon Mar 29 16:35:15 CEST 2010 - hare@suse.de
- Display average priority as group priority (bnc#588591)
- Implement 'wait event' cli command (bnc#586834)
- Reset existing maps (bnc#577894)
-------------------------------------------------------------------
Mon Mar 15 13:54:56 CET 2010 - hare@suse.de
- Setup 'checkint' when loading config file (bnc#586847)
-------------------------------------------------------------------
Wed Mar 10 11:20:56 CET 2010 - hare@suse.de
- Fix typo in persistent rules for by-label/by-uuid
- Update debug string in verify_paths()
- Evaluate feature setting in verify_paths() (bnc#584197)
-------------------------------------------------------------------
Fri Mar 5 09:34:37 CET 2010 - hare@suse.de
- Fixup 'async_timeout' initialization again (bnc#580413)
-------------------------------------------------------------------
Fri Feb 26 12:37:10 UTC 2010 - coolo@novell.com
- fix buffer overflow in strncat
-------------------------------------------------------------------
Mon Feb 22 10:08:44 CET 2010 - hare@suse.de
- 'reset log' cli command crashes daemon (bnc#577889)
- Initialize 'async_timeout' variable correctly (bnc#580413)
-------------------------------------------------------------------
Thu Feb 4 11:28:36 CET 2010 - hare@suse.de
- Add hardware defaults for EMC Invista (bnc#573870)
- Use '--replace-whitespace' for scsi_id (bnc#572209)
- Asynchronous mode for tur checker (bnc#552688)
- Update queue_if_no_path after sync with kernel state
(bnc#570932)
- Add 'max_polling_interval' config variable (bnc#570932)
- Add 'async_timeout' configuration variable (bnc#570932)
- Use default scsi_id callout for EMC Symmetrix (bnc#528481)
- Update path_offline() to return device status
- Update filename in init script
- Fixes from upstream:
* do not allow 0 size for multipath devices
* Add nexenta comstart hardware defaults
* Add checks for conf->xxx
* Add %z wildcard to display path serial
* don't pretend config file has setup parameters
* documentation fixes
-------------------------------------------------------------------
Mon Jan 25 14:44:43 CET 2010 - hare@suse.de
- Fixup kpartx initrd script to handle loop devices (bnc#523749)
- Switch off 'queue_if_no_path' before removing maps (bnc#475523)
- Update logical partition handling (bnc#551827)
-------------------------------------------------------------------
Fri Jan 22 16:19:17 CET 2010 - hare@suse.de
- Fix mkinitrd scripts for 64bit (bnc572143)
- Remove logical partitions maps with 'multipath -f'
-------------------------------------------------------------------
Fri Jan 22 14:30:36 CET 2010 - ro@suse.de
- testing for existence of /lib64 is not sufficient to find out
if we are building for a lib64 platform
-------------------------------------------------------------------
Mon Jan 11 15:10:18 CET 2010 - hare@suse.de
- Update dev_loss_tmo for no_path_retry (bnc#492469)
-------------------------------------------------------------------
Tue Nov 17 16:36:19 CET 2009 - hare@suse.de
- Merge in changes from OpenSUSE 11.2
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- Update no_path_retry setting when evaluating features (bnc#542145)
- directio: block count calculation wrong (bnc#549028)
- multipath segfaults if configuration file contains errors
(bnc#540118)
-------------------------------------------------------------------
Thu Oct 22 16:29:35 CEST 2009 - hare@suse.de
- Make 'param' local (bnc#548708)
- Include multipath-fix.patch in git tree.
-------------------------------------------------------------------
Mon Sep 28 15:34:02 CEST 2009 - hare@suse.de
- Fixup strip whitespaces from getuid output (bnc#542085)
- Change prefix for DASD devices to 'ccw'
- Update no_path_retry setting when evaluating features (bnc#542145)
-------------------------------------------------------------------
Wed Sep 16 12:54:03 CEST 2009 - hare@suse.de
- Update features when queue_if_no_path is set (bnc#511607)
- Ignore error messages when multipathd is not started
- Add debugging output for feature changes
- Add generic LSI/Engenio controller (bnc#508030)
- Update 'no_path_retry' correctly for failed paths (bnc#534666)
- TUR checker should not return 'failed' for reservation conflict
(bnc#498413)
-------------------------------------------------------------------
Tue Sep 8 20:56:53 UTC 2009 - aj@suse.de
- Fix last patch, one caller of dm_simplecmd was not updated
(multipath-fix.patch).
-------------------------------------------------------------------
Fri Aug 21 15:49:47 CEST 2009 - hare@suse.de
- Update to latest upstream git version
- Merge in SLES11 fixes
- Build package from git tree
- Implement '-u' option for kpartx (bnc#517442)
-------------------------------------------------------------------
Mon Jul 13 12:24:34 CEST 2009 - hare@suse.de
- Check for errors in pthread_create()
- Lock vectors during shutdown
- Cleanup various MALLOC/REALLOC callers
- Fix multipathd crash on shutdown
- Do not run kpartx on dm-uevent messages (bnc#473352)
- Set pthread stacksize correctly (bnc#485287)
- Add STK arrays to internal hardware table (bnc#503855)
- Correct persistent symlink for cciss (bnc#497997)
- Backport some fixes from upstream (bnc#445023)
- Add 'reset log' cli command
- no_path_retry <N> causes I/O to fail (bnc#485281)
- Terminate uevent service queue
- Wait for daemon to shutdown (bnc#481389)
- Update cli request processing
- Safe memory allocation in cli_handlers
- Use 'LOG_CONS' option for openlog()
- Remove sysfs attribute cache
- Add 'shutdown' cli command
- Display FC error messages correctly
- Wait for devices in init script (bnc#487586)
- Always synchronize with dm state (bnc#447887)
- Add 'aas' path prioritizer (bnc#472069)
- Synchronize daemon startup with init file (bnc#481389)
- Merge feature string in assemble_map (bnc#507793)
-------------------------------------------------------------------
Fri Jun 19 10:35:46 CEST 2009 - coolo@novell.com
- disable as-needed for this package as it fails to build with it
-------------------------------------------------------------------
Fri Mar 20 10:43:12 CET 2009 - hare@suse.de
- Reset checker message for blocked checkers
- Increase priority for EMC Clariion arrays (bnc#484529)
- Start waiter threads for single paths correctly (bnc#473841)
- Use pthread_sigmask in alias.c when called from daemon.
-------------------------------------------------------------------
Thu Mar 19 12:09:03 CET 2009 - hare@suse.de
- Add %pre and %post scripts to stop multipathd during update
- Don't set FC parameter on non-SCSI devices
- multipath -t crashes with invalid configuration file
-------------------------------------------------------------------
Fri Mar 13 14:21:05 CET 2009 - hare@suse.de
- Don't remove partition mappings on stop (bnc#468826)
- Set stacksize for log thread
- Terminate all I/O before flushing maps (bnc#475523)
- Select 'features' keyword from multipath setting (bnc#465009)
-------------------------------------------------------------------
Tue Mar 10 12:46:36 CET 2009 - hare@suse.de
- Use lists for uevent processing (bnc#478874)
- Set stacksize of uevent handling thread (bnc#478874)
- Increase uevent buffer size
- Strip trailing blanks from wwid
- Stack overflow in uev_trigger (bnc#476540)
-------------------------------------------------------------------
Thu Feb 26 12:36:40 CET 2009 - hare@suse.de
- Fixup multibus zero path handling (bnc#476330)
- Update checker handling for blocked devices
- Only pass block events to multipathd
- Clean up uevent processing (bnc#478874)
- Set stacksize correctly for event processing thread (bnc#478874)
-------------------------------------------------------------------
Mon Feb 23 16:36:32 CET 2009 - hare@suse.de
- Remove stray umask() call (bnc#458598)
- Don't call kpartx if no paths are active (bnc#473352)
-------------------------------------------------------------------
Thu Feb 19 16:26:32 CET 2009 - hare@suse.de
- Multipathd dies immediately after startup (bnc#473029)
- Return ghost state if port is in standby (bnc#475816)
- Switch off queue_if_no_path before removing paths (bnc#475523)
-------------------------------------------------------------------
Mon Feb 9 14:53:01 CET 2009 - hare@suse.de
- Fix leastpending loadbalancer output (bnc#444199)
- Start waitevent checker on new paths (bnc#473841)
- Use 'noflush' for kpartx (bnc#473352)
-------------------------------------------------------------------
Fri Feb 6 15:00:45 CET 2009 - hare@suse.de
- Display multipath output for leastpending loadbalancer
properly (bnc#444199)
-------------------------------------------------------------------
Wed Feb 4 11:38:31 CET 2009 - hare@suse.de
- Set queue_if_no_path setting during map reload (bnc#472253)
- Remove obsolete 'umount map' uevent handling
- Retry TUR on driver errors (bnc#456961)
-------------------------------------------------------------------
Tue Feb 3 11:22:41 CET 2009 - hare@suse.de
- Copy persistent bindings file into initramfs (bnc#468804)
- Invert DM_STATE check for kpartx rules (bnc#440959)
-------------------------------------------------------------------
Mon Feb 2 11:27:51 CET 2009 - hare@suse.de
- Correct dbg_malloc() definition
- Fix more memory leaks
- Double free on path release (bnc#458393)
-------------------------------------------------------------------
Mon Jan 26 14:17:57 CET 2009 - hare@suse.de
- Don't access blocked devices in checkerloop()
- Check for validity in VECTOR_XXX defines (bnc#469269,bnc#457465)
-------------------------------------------------------------------
Fri Jan 23 14:15:18 CET 2009 - hare@suse.de
- Update dev_loss_tmo handling (bnc#458393)
- Fix directio error messages
- Update sdev_state handling
-------------------------------------------------------------------
Mon Jan 19 09:18:28 CET 2009 - hare@suse.de
- Add new HP machines to hardware table (bnc#442133)
- Print device-mapper tables for debugging
- Properly quote variables in mkinitrd scripts (bnc#447966)
- shuffle call to memarea_init
- Add xdr_setsite in init scripts (bnc#459529)
-------------------------------------------------------------------
Tue Jan 13 16:14:39 CET 2009 - hare@suse.de
- Do not run checkers or prioritizers on blocked devices
(bnc#464155)
- Implement dev_loss_tmo and fast_io_fail_tmo (bnc#464155)
- Use default values for dev_loss_tmo and fast_io_fail_tmo
- Display checker and prio name on failure
- Add more debugging output
-------------------------------------------------------------------
Mon Jan 12 17:28:47 CET 2009 - hare@suse.de
- Set max_fds setting for multipath (bnc#457443)
- Enhance error messages for checker and prio loading (bnc#456214)
- Fix merge errors for prio_weightedpath (bnc#441007)
- Fix sysfs_attr_get_value (bnc#456747)
- Do not reinitialize prio and checker lists after config file
has been parsed (bnc#464373)
- Minor cleanups
-------------------------------------------------------------------
Thu Dec 4 15:05:08 CET 2008 - hare@suse.de
- Split off IBM ESS hwtable entries (bnc#439763)
- Reload map when device R/O setting changes (bnc#440959)
-------------------------------------------------------------------
Fri Nov 21 14:07:56 CET 2008 - hare@suse.de
- Add 'Weighted Paths' prioritizer (bnc#441007)
- Fix crashes in update_multipath
-------------------------------------------------------------------
Thu Nov 20 16:10:48 CET 2008 - hare@suse.de
- Valgrind fixes
* Add missing initialisation
* Always allocate memory for alias
* Check return value of basename
- Adapt to new sysfs layout (bnc#435215, bnc#445041)
- Use /sys/dev to speedup reverse lookups
- Rework sysfs device handling (bnc#435215, bnc#438031)
- Search for correct hardware entry during reconfigure (bnc#435688)
- Use local variables for device mapper params
- Allow zero paths for multipath maps
-------------------------------------------------------------------
Mon Nov 17 12:42:34 CET 2008 - hare@suse.de
- Update HP hardware table (bnc#442133)
- Zero out lines in print.c (bnc#445023)
-------------------------------------------------------------------
Mon Nov 10 08:51:26 CET 2008 - hare@suse.de
- Check for empty mpvecs in mpvec_garbage_collector() (bnc#437245)
- dmraid uuid starts with 'DMRAID' (bnc#439439)
- Handle arguments to multipathd from the init file
-------------------------------------------------------------------
Thu Nov 6 17:36:51 CET 2008 - ro@suse.de
- commenting multiline rpm macros is dangerous (read broken)
remove percent sign in commented macro lines
-------------------------------------------------------------------
Mon Nov 3 15:37:08 CET 2008 - hare@suse.de
- Use pthread_join() during shutdown to avoid crash (bnc#437245)
- Fixup '%n' to handle '!' kernel device name syntax (bnc#435172)
- Use correct commandline for cciss scsi_id callouts (bnc#435172)
- Do not check for valid mp context in get_state() (bnc#433659)
- Link directio checker against libaio (bnc#433659)
- Use regmatch when checking for duplicates in hwtable (bnc#439763)
-------------------------------------------------------------------
Mon Oct 27 10:30:18 CET 2008 - hare@suse.de
- Patches from mainline:
* Increase bindings file lock timeout
* Fixes for 'show paths format'
* Add 'show wildcards' cli cmd
* Add support for IBM storage devices
- fopen() returns NULL on failure (bnc#432598)
- Read verbosity level from configuration file (bnc#388284)
- kpartx -l does not remove it's loop device (bnc#417266)
- Missing fixes for libprio ontap.c (bnc#426975)
- Increase buffer size in find_loop_by_file (bnc#436428)
- Include SCSI device handler modules for initrd (bnc#431877)
-------------------------------------------------------------------
Fri Sep 26 16:26:55 CEST 2008 - hare@suse.de
- Implement map resize (FATE#302007)
- Handle cciss devices correctly (bnc#419123)
-------------------------------------------------------------------
Wed Sep 24 22:59:11 CEST 2008 - ro@suse.de
- use udevadm info instead of udevinfo
-------------------------------------------------------------------
Wed Sep 3 11:09:34 CEST 2008 - hare@suse.de
- Merge in fixes from upstream:
* Add IBM IPR to hardware table (bnc#419086)
* Add IBM DS4300 to hardware table
* Fix settings for scsi_id changes
- Call mkinitrd_setup during %post and %postun (bnc#413709)
-------------------------------------------------------------------
Thu Aug 28 17:08:16 CEST 2008 - ro@suse.de
- fix init scripts
-------------------------------------------------------------------
Wed Jul 23 14:45:18 CEST 2008 - hare@suse.de
- Update to version 0.4.8
- Include changes from SLES10
- Include mkinitrd scriptlets
-------------------------------------------------------------------
Wed May 28 09:50:28 CEST 2008 - hare@suse.de
- Calculate correct partition offset in kpartx (bnc#394658)
-------------------------------------------------------------------
Fri May 9 13:25:30 CEST 2008 - hare@suse.de
- Fixup kpartx rules (bnc#387667)
-------------------------------------------------------------------
Tue Apr 29 17:05:19 CEST 2008 - hare@suse.de
- Merge in fixes from upstream
- Merge fixes from SLES10 SP2
-------------------------------------------------------------------
Wed Sep 19 15:30:41 CEST 2007 - hare@suse.de
- Fixup generated dm_linear udev rules (#218122)
-------------------------------------------------------------------
Thu Aug 30 09:24:27 CEST 2007 - hare@suse.de
- Rework dm_linear; udev rules should only be
created if the feature was activated (#302422)
-------------------------------------------------------------------
Fri Aug 10 16:48:31 CEST 2007 - hare@suse.de
- Implement dm_linear (#218122)
-------------------------------------------------------------------
Thu Aug 2 11:10:35 CEST 2007 - hare@suse.de
- Merge in latest fixes from upstream
- Remove local patches; merge with upstream
- Fix kpartx handling of extended partitions
- Use underscores for partition names (#293792)
-------------------------------------------------------------------
Mon May 21 15:34:07 CEST 2007 - hare@suse.de
- Rework udev handling
- Split off kpartx package
-------------------------------------------------------------------
Mon May 14 16:20:55 CEST 2007 - hare@suse.de
- Merge in latest fixes from upstream
- Add all SuSE specific files to git repository.
-------------------------------------------------------------------
Fri May 11 16:06:16 CEST 2007 - hare@suse.de
- Include latest changes from upstream
- Remove libsysfs (242766)
- Handle extended partitions for kpartx
-------------------------------------------------------------------
Mon Dec 4 16:51:13 CET 2006 - dmueller@suse.de
- don't build as root
-------------------------------------------------------------------
Fri Nov 17 11:55:00 CET 2006 - hare@suse.de
- integrate upstream fixes
- update udev rule for YaST2 dmraid support (217807])
-------------------------------------------------------------------
Mon Nov 6 13:11:17 CET 2006 - hare@suse.de
- Really fixup udev rule (216167).
-------------------------------------------------------------------
Fri Oct 20 02:07:47 CEST 2006 - ro@suse.de
- make it build
-------------------------------------------------------------------
Mon Sep 25 10:03:49 CEST 2006 - hare@suse.de
- update to latest fixes from git tree
- remove fixes integrated in upstream
- fixup udev rule (#203688)
-------------------------------------------------------------------
Thu Sep 14 00:18:10 CEST 2006 - ro@suse.de
- use device-mapper-devel in BuildRequires
-------------------------------------------------------------------
Thu Aug 31 10:56:01 CEST 2006 - hare@suse.de
- include latest fixes from git tree
- update kpartx_id and udev rules to work
with dmraid.
- Fix return value for multipath -l
-------------------------------------------------------------------
Thu Aug 17 02:07:59 CEST 2006 - ro@suse.de
- workaround problem in git-patch
normal patch can't do a "rename", so copy file first
-------------------------------------------------------------------
Tue Jul 11 15:04:59 CEST 2006 - hare@suse.de
- Update to official version 0.4.7
- Refactor git update to apply to 0.4.7
-------------------------------------------------------------------
Wed Jun 28 13:51:36 CEST 2006 - hare@suse.de
- Remove blacklisting of dasd device node,
use product_blacklist instead (#188688)
-------------------------------------------------------------------
Mon Jun 12 15:14:41 CEST 2006 - hare@suse.de
- Add 72-multipath-compat.rules to create 'by-name'
symlink again for compability (#183663)
-------------------------------------------------------------------
Fri Jun 2 12:47:05 CEST 2006 - hare@suse.de
- Merge in fixed from upstream
- Set device-mapper name correctly (#181127)
-------------------------------------------------------------------
Thu Jun 1 17:29:23 CEST 2006 - hare@suse.de
- Merge in fixes from upstream
- Fixup aliasing handling
- Fix string length in pp_alua
- Use correct regexp patterns for hwtable (#177842)
- Fixup 71-multipath.rules to work correctly with the
updated device-mapper online/offline events (#176516 - LTC23961)
- Add kpartx_id for the updated 71-multipath.rules
-------------------------------------------------------------------
Mon May 22 17:16:00 CEST 2006 - schwab@suse.de
- Don't strip binaries.
-------------------------------------------------------------------
Tue May 2 12:48:56 CEST 2006 - hare@suse.de
- Merge in fixes from upstream
- Merged local patches
- Added hds_modular prioritizer
- Remove merged patches
- Allow for setting of maximum number of open files (#149979)
- Implement 'stop' for init scripts
-------------------------------------------------------------------
Mon Apr 10 09:48:16 CEST 2006 - hare@suse.de
- Lowering priority for pp_tpc
- Split off DS6000 to fixup priority handler (#161347)
-------------------------------------------------------------------
Wed Apr 5 12:14:53 CEST 2006 - hare@suse.de
- Disable debug messages in pp_tpc.
-------------------------------------------------------------------
Wed Mar 29 09:27:50 CEST 2006 - hare@suse.de
- Explicitely create partitions at boot time (#159927)
-------------------------------------------------------------------
Thu Mar 23 11:36:25 CET 2006 - hare@suse.de
- Add hwtable entry for IBM 3526.
-------------------------------------------------------------------
Tue Mar 14 16:40:41 CET 2006 - hare@suse.de
- Fix another typo in mpath_id.
-------------------------------------------------------------------
Tue Mar 14 16:20:33 CET 2006 - hare@suse.de
- Fix typo in mpath_id.
-------------------------------------------------------------------
Mon Mar 13 13:29:08 CET 2006 - hare@suse.de
- Fix autobuild warnings.
- Include some minor fixed from upstream.
-------------------------------------------------------------------
Thu Mar 9 11:28:11 CET 2006 - hare@suse.de
- Add mpath_id program to call kpartx only on multipathed
devices (#149995 - LTC21557).
- Include latest fixes from upstream.
-------------------------------------------------------------------
Wed Feb 8 16:13:15 CET 2006 - hare@suse.de
- Add device blacklisting (#85778)
- Further manpage installation fixes (#146179, #147053, #147911)
-------------------------------------------------------------------
Wed Jan 25 21:38:27 CET 2006 - mls@suse.de
- converted neededforbuild to BuildRequires
-------------------------------------------------------------------
Thu Jan 19 13:59:32 CET 2006 - hare@suse.de
- Fix manpage installation.
-------------------------------------------------------------------
Tue Jan 17 09:01:03 CET 2006 - hare@suse.de
- Include latest git fixes
- Remove old patches which are now upstream
- Add new hwtable entry for shark (#142176)
-------------------------------------------------------------------
Fri Dec 16 15:20:47 CET 2005 - hare@suse.de
- Fix dependencies for /etc/init.d/boot.multipath
- Fix kpartx rules to generate proper partition names.
-------------------------------------------------------------------
Wed Dec 7 16:49:02 CET 2005 - hare@suse.de
- Update to multipath-tools-0.4.6
- Include latest git fixes
- Port patches from SLES9 SP3
-------------------------------------------------------------------
Mon Oct 31 12:30:14 CET 2005 - dmueller@suse.de
- don't build as root
-------------------------------------------------------------------
Mon Sep 5 17:40:04 CEST 2005 - matz@suse.de
- Fix broken usage of self-defined syscall [#114933].
-------------------------------------------------------------------
Fri Aug 26 16:00:36 CEST 2005 - hare@suse.de
- Fix kpartx DASD partition support
-------------------------------------------------------------------
Thu Aug 4 16:45:27 CEST 2005 - hare@suse.de
- Add 'directio' path checker
- Add support for S/390 DASD (PAV enablement).
- Update to package from SLES9
-------------------------------------------------------------------
Thu Jun 23 10:05:56 CEST 2005 - lmb@suse.de
- LUs with a WWN containing "fd" were blacklisted (#93562).
-------------------------------------------------------------------
Thu Jun 16 16:33:42 CEST 2005 - lmb@suse.de
- Remove stray newline character from /dev/disk/by-name/ entries
(#85798, #86763)
- Clear /dev/disk/by-name/ on boot. (#85978)
- scsi_id now handles EMC Symmetrix; remove work-around for #86760.
-------------------------------------------------------------------
Wed Jun 15 13:31:47 CEST 2005 - meissner@suse.de
- use RPM_OPT_FLAGS.
-------------------------------------------------------------------
Mon Jun 13 23:51:59 CEST 2005 - ro@suse.de
- neededforbuild: udev -> sysfsutils
-------------------------------------------------------------------
Tue Jun 7 15:38:36 CEST 2005 - lmb@suse.de
- Import fixes from upstream.
- Hardware table updates for IBM ESS and EMC CX (#81688).
- Reinstate paths correctly after failure/restore cycle (#85781,
#86444).
- Create map names again and fix segfault in devmap_name (#85798).
-------------------------------------------------------------------
Tue May 24 15:16:16 CEST 2005 - hare@suse.de
- Fix segmentation fault with EMC Symmetrix (#85614).
- Update EMC Symmetrix entry in hwtable.
-------------------------------------------------------------------
Mon May 23 12:21:31 CEST 2005 - hare@suse.de
- Add hwtable entry for IBM DS6000. (#63903)
- Do a rescan for devices if multipath command line option is set.
-------------------------------------------------------------------
Fri May 20 15:29:45 CEST 2005 - hare@suse.de
- Fix devmap_name to use mapname and return proper status (#84748).
-------------------------------------------------------------------
Thu May 12 12:10:39 CEST 2005 - lmb@suse.de
- Don't complain about default prio callout command (#81695).
- Reflect recent changes in boot.multipath as well as multipathd init
scripts.
- Actually fail paths when they are detected to be failed by multipathd
(#81679).
- killproc/startproc/checkproc can't be used with multipathd because of
the way the daemon switches to its own namespace (#80443).
-------------------------------------------------------------------
Mon May 9 11:18:35 CEST 2005 - hare@suse.de
- Use proper path checker for SGI TPC arrays.
- Update hwtable entries for SGI TP9400 and SGI TP9500.
- Write correct PID file (#80443).
-------------------------------------------------------------------
Mon Apr 25 11:41:33 CEST 2005 - lmb@suse.de
- Update to 0.4.4: pp_alua now licensed as GPL (#78628).
- multipath-tools-oom-adj.patch: oom_adj to a valid value.
-------------------------------------------------------------------
Thu Apr 21 10:50:05 CEST 2005 - lmb@suse.de
- Update to 0.4.4-pre18 which fixes the multipathd to initialize
correctly in the absence of a configuration file (79239).
-------------------------------------------------------------------
Wed Apr 20 16:05:56 CEST 2005 - lmb@suse.de
- Put multipath cache back into /dev because /var might not be mounted.
- Correct hwtable entry SGI TP9400, TP9500 and IBM 3542.
-------------------------------------------------------------------
Wed Apr 20 13:32:51 CEST 2005 - lmb@suse.de
- Update to 0.4.4-pre16
- Build against device-mapper.1.01.xx correctly.
-------------------------------------------------------------------
Tue Apr 19 12:02:49 CEST 2005 - lmb@suse.de
- Build w/o device-mapper update again.
-------------------------------------------------------------------
Mon Apr 18 14:21:59 CEST 2005 - lmb@suse.de
- Update to 0.4.4-pre14
- Build versus device-mapper-1.01.01 to prevent deadlocks in
kernel-space.
- Fix devmap_name to work with udev.
- Fix startup of multipathd w/o configuration file present.
-------------------------------------------------------------------
Fri Apr 15 14:46:19 CEST 2005 - lmb@suse.de
- Add path priority checker for EMC CLARiiON and make necessary
adjustments so that it gets called by default (#62491).
- Set the default udev dir to '/dev'
-------------------------------------------------------------------
Fri Apr 15 13:18:42 CEST 2005 - hare@suse.de
- Fix to allocate default strings (#78056)
- Fix default entry for TPC9500.
-------------------------------------------------------------------
Wed Apr 13 08:30:21 CEST 2005 - hare@suse.de
- Added pp_alua path priority checker.
- Update to multipath-tools-0.4.4-pre12.
-------------------------------------------------------------------
Mon Apr 11 13:32:05 CEST 2005 - hare@suse.de
- Update to multipath-tools-0.4.4-pre10.
-------------------------------------------------------------------
Fri Apr 8 09:38:16 CEST 2005 - hare@suse.de
- Update multipath to handle only true multipath devices (#62491).
- Update kpartx to use the device mapper target name if available.
- Add boot.multipath script for early set up of multipath targets.
-------------------------------------------------------------------
Thu Mar 31 09:32:12 CEST 2005 - hare@suse.de
- Update devmap_name to select targets by table type (#62493).
-------------------------------------------------------------------
Tue Jan 25 11:16:26 CET 2005 - lmb@suse.de
- Update to 0.4.2 and fix some bugs + add support for the extended DM
multipath kernel module. (#47491)
-------------------------------------------------------------------
Thu Nov 11 18:15:15 CET 2004 - hare@suse.de
- Fix bugs to make it work on S/390 (#47491).
-------------------------------------------------------------------
Fri Nov 5 13:58:00 CET 2004 - hare@suse.de
- Update to version 0.3.6 (#47491).
- Fix multipath init script
- Install configuration file example.
- Install multipathd in /sbin instead of /usr/bin.
-------------------------------------------------------------------
Tue Jul 20 09:22:11 CEST 2004 - fehr@suse.de
- updated README mp-tools-issues.pdf (see #40640)
-------------------------------------------------------------------
Wed Jun 9 12:18:01 CEST 2004 - fehr@suse.de
- added pdf with README to package (see #40640)
-------------------------------------------------------------------
Thu Jun 3 18:11:41 CEST 2004 - fehr@suse.de
- updated to version 0.2.1
- removed patches zero-currpath.patch and rm-newline-in-name.patch
already contained in 0.2.1
-------------------------------------------------------------------
Thu Jun 3 09:38:49 CEST 2004 - fehr@suse.de
- added patch zero-currpath.patch (see bugzilla #40640)
-------------------------------------------------------------------
Wed May 26 20:14:05 CEST 2004 - uli@suse.de
- fixed to build on s390x
-------------------------------------------------------------------
Wed May 26 10:57:37 CEST 2004 - fehr@suse.de
- added patch rm-newline-in-name.patch (see bugzilla #40640)
-------------------------------------------------------------------
Tue May 25 10:43:15 CEST 2004 - fehr@suse.de
- created initial version of a SuSE package from version 0.2.0 of
multipath tools
-------------------------------------------------------------------
Reference in New Issue View Git Blame Copy Permalink