------------------------------------------------------------------- Sat Jan 23 16:59:39 UTC 2016 - mpluskal@suse.com - Update to 3.13 * This is mainly a bugfix release, containing fixes found in 3.12.1 by compiling on different architectures, submitting the build to Coverity Scan, and some analysis of intermittent failures that found a race condition. ------------------------------------------------------------------- Tue Dec 1 17:01:47 UTC 2015 - p.drouand@gmail.com - Update to version 3.12.1 * ensures the source to the "nbdtab" man page is correctly shipped with the rest of the source. - Changes from version 3.12 * inetd mode should work again, now using the default export name in the newstyle protocol * when specifying an export on the server command line or not specifying a name on a client command line, the newstyle protocol is used with the default export name (but a warning will be produced stating that oldstyle is no longer supported) * All traces of oldstyle (except a few error messages) have been removed * We now listen on IPv4 and IPv6 by default, regardless of what the system's configuration is like, by explicitly listening both on 0.0.0.0 and ::. * Some bugs in the handling of the TRIM command have been removed * nbd *client now uses readit() in the negotiation, rather than plain non *retrying read(). * It is now possible to listen on multiple addresses; the "listenaddr" parameter has been changed into a comma *separated list of addresses to listen on * nbd *client now supports an nbdtab file, which allows connecting a device by just using the device name * nbd *server now uses a GThreadPool to implement asynchronous handling of requests * Punching holes on files is now supported on cygwin, too. - Remove no-return-nonvoid.patch; fixed on upstream release ------------------------------------------------------------------- Thu May 28 11:32:18 UTC 2015 - mpluskal@suse.com - Update to 3.11 * nbd-server: fix unsafe signal handling * define error values as part of the protocol * docs/proto: clarify NBD_CMD_FLUSH - Drop nbd_signaling_CVE-2015-0847.patch as fix is included in upstream ------------------------------------------------------------------- Mon May 11 08:13:48 UTC 2015 - mpluskal@suse.com - Fix CVE-2015-0847 * nbd_signaling_CVE-2015-0847.patch ------------------------------------------------------------------- Fri Apr 17 13:27:19 UTC 2015 - mpluskal@suse.com - Update to 3.10 * There really is only one change since 3.9: drop of the "oldstyle" support from nbd-server and nbd-client. ------------------------------------------------------------------- Thu Mar 5 12:28:06 UTC 2015 - mpluskal@suse.com - Cleanup spec-file with spec-cleaner - Do not generate config.example from README * add config.example as source - Add unit file (nbd-server.service) - Add sysconfig template (nbd-server.sysconfig) - Add no-return-nonvoid.patch - Update requirements - Update to 3.9 * AF_UNIX support * Fixed test suite on non-GNU getopt() implementations * New "treefiles" mode, which exports a gazillion of page-sized files; useful for exporting things which are stored on an SSHFS or amazon AWS (trough FUSE) or similar, where every write causes an upload to the backend storage * New "cowdir" option, allowing to specify where copy-on-write files are written. * Minor changes so that nbd-client can now also be compiled for the Android platform. This required removal of the -swap command line option, which requires the mlockall() system call, unavailable on Android. * Protocol update: a reserved bit is used to avoid sending the 124 bytes of useless data at the beginning of the negotiation. The change is implemented so that things will still work with clients not supporting this option, however. * gznbd is now built by the same build system, rather than a separate one. Note however that gznbd is still unmaintained; it should be considered a "contrib" feature. * "nbd-server -V" will now output the nbd-server version number. * Various fixes found through Coverity and the clang static analyzer, and lots of other minor things too small to mention here. ------------------------------------------------------------------- Sun Nov 09 19:27:00 UTC 2014 - Led - fix bashisms in pre script ------------------------------------------------------------------- Thu Apr 18 19:38:29 UTC 2013 - dmueller@suse.com - update to 3.3: * and various bugfixes, upgrading is strongly recommended * Fix various nbd-server misbehave bugs ------------------------------------------------------------------- Tue Jul 10 07:08:17 UTC 2012 - aj@suse.de - Fix restart_on_update usage. ------------------------------------------------------------------- Fri May 18 13:44:05 UTC 2012 - tabraham@novell.com - Update to nbd-3.1 * minor bug fixes * new feature: ability for the client to list the exports a server supports ------------------------------------------------------------------- Wed Feb 29 15:51:37 UTC 2012 - tabraham@novell.com - Update to nbd-3.0 * minor bug fixes - removed obsolete nbd-2.9.25-have_falloc_ph.diff - compile with -fno-strict-aliasing to prevent breakage with new gcc ------------------------------------------------------------------- Thu Jan 5 20:31:57 UTC 2012 - tabraham@novell.com - Update to nbd-2.9.25 * TRIM now uses FALLOC_FL_PUNCH_HOLE * minor bug fixes - removed obsolete nbd-2.9.20-bigendian.diff - refreshed nbd-2.9.20-close.diff ------------------------------------------------------------------- Fri Sep 16 13:46:09 UTC 2011 - rfno@fietze-home.de - Install nbd-server.5 man page ------------------------------------------------------------------- Mon Apr 4 17:30:17 CEST 2011 - ms@suse.de - socklen_t is always 32bit, size_t is 64bit. so a classical big endian 64bit error (bnc #674281) ------------------------------------------------------------------- Fri Feb 25 12:40:16 CET 2011 - ms@suse.de - Update to nbd-2.9.20: * Documentation update * Fix buffer size checking (bnc #674281) * Extend test suite and fix named exports ------------------------------------------------------------------- Wed Aug 5 11:58:52 CEST 2009 - ms@suse.de - fixed missing close to open (bnc #528272) ------------------------------------------------------------------- Thu Jul 9 11:41:55 CEST 2009 - ms@suse.de - Update to nbd-2.9.13: * Documentation update * Don't try working on partitions When a partition is given to the -d or -c command line options, reduce it to the master device instead. This assumes udev-style naming of device entries, though. * Fix autodetection Everything else in nbd-server was already 64bit-clean, but this part, where the size of a block device is autodected, wasn't. Replace the ioctl() to BLKGETSIZE with its 64bit version, so that trying to detect the size of a multi-terabyte block device does not fail. * Avoid unaligned access * Actually go daemon just doing chdir("/") leave file descriptors open, which is not ideal. Doing it this way closes everything, including any system-specific things we're not aware of. * Remove support for timeout option ------------------------------------------------------------------- Mon May 4 10:40:15 CEST 2009 - ms@suse.de - Update to nbd-2.9.12: * use atoll instead of atol ... so that multi-terabyte exports work, too * Change meaning of -swap option: rather than trying to use a kernel patch which has been effectively dead since sometime around 2.1.something, do an mlockall() so that the kernel won't throw us out. The MCL_CURRENT | MCL_FUTURE bit might prove to be problematic, but if so, we'll deal with it when we get there * Use right printf() format string ------------------------------------------------------------------- Wed Aug 20 08:13:31 CEST 2008 - garloff@suse.de - Update to nbd-2.9.11: * nbd-client: new option -c to check for connection, -d to drop connection, -persist to infinitely retry connections dropped by server. timeout= setting * nbd-server: drop autoreadonly option ------------------------------------------------------------------- Thu Nov 15 14:26:56 CET 2007 - garloff@suse.de - Update to nbd-2.9.9: * Document -C option of nbd-server. * Fix name of /var/run/ file. ------------------------------------------------------------------- Wed Nov 7 22:12:26 CET 2007 - garloff@suse.de - Split nbd into nbd and nbd-doc packages. - Update to nbd-2.9.8: * nbd-server can now setuid to specified user and group. * prerun and postrun scripts can be specified. * IP address to bind to (listenaddress) can be configured. * Socket Direct Protocol (sdp) -- not enabled. * server exits now after connection has gone (oops!). * nbd-client: timeout parameter. ------------------------------------------------------------------- Mon Jul 30 15:51:16 CEST 2007 - garloff@suse.de - Convert options from old nbd-server.conf to new nbd-server/config on update and drop support for old config file syntax. - Fix daemonize(0) segfault and pid filename. - Fix compiler warnings. - Fix /dev filename docu. - Use startproc, killproc, checkproc in init script - nbd-server does not support SIGHUP, fix init script accordingly. ------------------------------------------------------------------- Tue Jul 17 00:54:45 CEST 2007 - garloff@suse.de - Update to nbd-2.9.5: * Support for more platforms, pkgconfig, debug build. * -o option to convert cmdline options to config file. * Fix duplication in handling nonblocking server socket. ------------------------------------------------------------------- Mon Mar 12 23:45:45 CET 2007 - garloff@suse.de - Update to 2.9.2: * make child socket nonblocking * Reintegrate fix for 64bit on looking for file size. * Fix cross-compiling * Search for libraries to allow linking on Solaris - Update to 2.9.1: * A fix for a piece of code following a null pointer, and one for a memory leak (if only minor). - Update to 2.9.0: * * Configuration file support * The ability to server multiple nbd-server exports from one server * Better multiple-file support (files can now be of any random size) * Better support for virtualizing servers (in addition to replacing %s with the client's IP address, it is now also possible to use other options which allow for hashed directories) * Support for changing uid and gid after startup * The ability to do the copy-on-write stuff with a sparse file rather than a mapped file (specified by a config file option), which may be slightly faster. ------------------------------------------------------------------- Sat Nov 18 01:49:07 CET 2006 - garloff@suse.de - Add nbd-server init script (parses /etc/nbd-server.conf). ------------------------------------------------------------------- Thu Oct 19 14:03:52 CEST 2006 - garloff@suse.de - Update to nbd-2.8.7: * A fix for build against nbd.h for kernel 2.6.18 (and above, presumably) ------------------------------------------------------------------- Fri Oct 13 00:50:12 CEST 2006 - ro@suse.de - include linux/types.h before linux/nbd.h ------------------------------------------------------------------- Mon Aug 7 15:32:39 CEST 2006 - garloff@suse.de - Update to nbd-2.8.6: * performance/reliability improvements: Use select() rather than accept() and waitpid() with WNOHANG rather than wait(). - Update to nbd-2.8.5: * -persist option. * Add export verification. * Make sure queue is empty for write requests to read-only export. - Update to nbd-2.8.4: * Includes the previous fix (closing server socket) ------------------------------------------------------------------- Mon Mar 6 14:14:26 CET 2006 - garloff@suse.de - Make sure children quit when they finish serving, rather than trying to do stuff with a server socket that they've closed already in a loop. Whoops. (Fix from nbd-2.8.4.) ------------------------------------------------------------------- Wed Jan 25 21:38:34 CET 2006 - mls@suse.de - converted neededforbuild to BuildRequires ------------------------------------------------------------------- Mon Jan 23 16:07:50 CET 2006 - garloff@suse.de - Enable -fstack-protector. ------------------------------------------------------------------- Mon Jan 9 14:41:25 CET 2006 - garloff@suse.de - Update to nbd-2.8.3: * CVE-2005-3534. * A fix for 64bit systems regarding the BLKGETSIZE ioctl(). * Better handling of SIGCHLD. ------------------------------------------------------------------- Tue Dec 20 00:05:22 CET 2005 - garloff@suse.de - Update to nbd-2.8.2: * Enable LFS by default. ------------------------------------------------------------------- Wed Nov 2 22:27:40 CET 2005 - dmueller@suse.de - don't build as root ------------------------------------------------------------------- Fri Oct 28 10:22:59 CEST 2005 - garloff@suse.de - Update to version 2.8.1. - Documentation added. ------------------------------------------------------------------- Mon Jul 4 18:24:39 CEST 2005 - garloff@suse.de - Initial creation of package. -------------------------------------------------------------------